Mass update of the Apache 2.0 license statement.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11361 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 173 insertions, 173 deletions

diff --git a/testhal/ATSAMA5D2/SDMMC/main.c b/testhal/ATSAMA5D2/SDMMC/main.c
index 978453d25..48cb01548 100644
--- a/testhal/ATSAMA5D2/SDMMC/main.c
+++ b/testhal/ATSAMA5D2/SDMMC/main.c
@@ -1,173 +1,173 @@
-/*
- ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- */
-#include <string.h>
-#include "ch.h"
-#include "hal.h"
-#include "sama_sdmmc_lld.h"
-#include "chprintf.h"
-
-
-#define BLOCK_CNT_MAX               32u
-#define DMADL_CNT_MAX               64u
-#define BLOCK_CNT                   3u
-
-
-CACHE_ALIGNED uint8_t data_buf[BLOCK_CNT_MAX * 512ul];
-
-CACHE_ALIGNED static uint32_t dma_table[DMADL_CNT_MAX * SDMMC_DMADL_SIZE];
-
-CACHE_ALIGNED uint8_t sdmmcbuffer[ROUND_UP_MULT(EXT_SIZE + SSR_SIZE + SCR_SIZE + SB1_SIZE + SB2_SIZE, L1_CACHE_BYTES)];
-
-static FATFS fs_header;
-//static FIL f_header;
-
-BaseSequentialStream * ts;
-
-static const SerialConfig sdcfg = { 115200, 0,UART_MR_PAR_NO };
-
-/*
- * LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 512);
-static THD_FUNCTION(Thread1, arg) {
-
-	(void) arg;
-	chRegSetThreadName("blinker");
-
-	while (true) {
-		palToggleLine(LINE_LED_BLUE);
-		chThdSleepMilliseconds(500);
-	}
-}
-
-
-
-static const SamaSDMMCConfig sdmmc_slot1_cfg = {
-		SDMMC_SLOT1,
-		sdmmcbuffer,
-		data_buf,
-		sizeof(data_buf),
-		dma_table,
-		DMADL_CNT_MAX
-};
-
-void getdir(SdmmcDriver *sdmmcp);
-/*
- * Application entry point.
- */
-int main(void) {
-
-	/*
-	 * System initializations.
-	 * - HAL initialization, this also initializes the configured device drivers
-	 *   and performs the board-specific initializations.
-	 * - Kernel initialization, the main() function becomes a thread and the
-	 *   RTOS is active.
-	 */
-	halInit();
-	chSysInit();
-
-	/*
-	 * Activates the serial driver 0 using the driver default configuration.
-	 */
-	sdStart(&SD1, &sdcfg);
-
-	/* Redirecting  UART0 RX on PD2 and UART0 TX on PD3. */
-	palSetGroupMode(PIOD, PAL_PORT_BIT(2) | PAL_PORT_BIT(3), 0U,
-			PAL_SAMA_FUNC_PERIPH_A | PAL_MODE_SECURE);
-
-	ts = (BaseSequentialStream *) &SD1;
-
-	sdmmcInit();
-
-	sdmmcStart(&SDMMCD1, &sdmmc_slot1_cfg);
-
-	if (SDMMCD1.state != MCID_INIT_ERROR) {
-
-		chprintf(ts,"starting MMC Demo\n\r");
-
-		if (sdmmcOpenDevice(&SDMMCD1)) {
-
-			//sdmmcShowDeviceInfo(&SDMMCD1);
-			if ( sdmmcMountVolume(&SDMMCD1,&fs_header) ) {
-				chprintf(ts,"reading files:\n\r");
-				getdir(&SDMMCD1);
-			}
-			sdmmcCloseDevice(&SDMMCD1);
-		}
-
-
-	} else {
-		chprintf(ts,"error,stopping MMC\n\r");
-		sdmmcStop(&SDMMCD1);
-	}
-
-	/*
-	 * Creates the blinker thread.
-	 */
-	chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-
-	/*
-	 * Normal main() thread activity, in this demo it does nothing except
-	 * sleeping in a loop and check the button state.
-	 */
-	while (true) {
-		chThdSleepMilliseconds(500);
-	}
-}
-
-
-bool sdmmcGetInstance(uint8_t index, SdmmcDriver **sdmmcp)
-{
-	if (index == SDMMCD1.config->slot_id) {
-		*sdmmcp = &SDMMCD1;
-		return true;
-	}
-	return false;
-}
-
-void getdir(SdmmcDriver *sdmmcp)
-{
-	const TCHAR drive_path[] = { '0' + sdmmcp->config->slot_id, ':', '\0' };
-	DIR dir = { .sect = 0 };
-	FILINFO fno = { 0 };
-	FRESULT res;
-	bool is_dir;
-
-	res = f_opendir(&dir, drive_path);
-	if (res != FR_OK) {
-		chprintf(ts,"Failed to open dir, error %d\n\r", res);
-		return;
-	}
-	chprintf(ts,"files in the root directory:\n\r");
-	for (;;) {
-		res = f_readdir(&dir, &fno);
-		if (res != FR_OK) {
-			chprintf(ts,"cannot read dir, error (%d)\n\r", res);
-			break;
-		}
-		if (fno.fname[0] == '\0')
-			break;
-		is_dir = fno.fattrib & AM_DIR ? true : false;
-		chprintf(ts,"    %s%s%c\n\r", is_dir ? "[" : "", fno.fname,
-				is_dir ? ']' : ' ');
-	}
-
-	res = f_closedir(&dir);
-}
-
-
-
+/*

+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+#include <string.h>

+#include "ch.h"

+#include "hal.h"

+#include "sama_sdmmc_lld.h"

+#include "chprintf.h"

+

+

+#define BLOCK_CNT_MAX               32u

+#define DMADL_CNT_MAX               64u

+#define BLOCK_CNT                   3u

+

+

+CACHE_ALIGNED uint8_t data_buf[BLOCK_CNT_MAX * 512ul];

+

+CACHE_ALIGNED static uint32_t dma_table[DMADL_CNT_MAX * SDMMC_DMADL_SIZE];

+

+CACHE_ALIGNED uint8_t sdmmcbuffer[ROUND_UP_MULT(EXT_SIZE + SSR_SIZE + SCR_SIZE + SB1_SIZE + SB2_SIZE, L1_CACHE_BYTES)];

+

+static FATFS fs_header;

+//static FIL f_header;

+

+BaseSequentialStream * ts;

+

+static const SerialConfig sdcfg = { 115200, 0,UART_MR_PAR_NO };

+

+/*

+ * LED blinker thread, times are in milliseconds.

+ */

+static THD_WORKING_AREA(waThread1, 512);

+static THD_FUNCTION(Thread1, arg) {

+

+	(void) arg;

+	chRegSetThreadName("blinker");

+

+	while (true) {

+		palToggleLine(LINE_LED_BLUE);

+		chThdSleepMilliseconds(500);

+	}

+}

+

+

+

+static const SamaSDMMCConfig sdmmc_slot1_cfg = {

+		SDMMC_SLOT1,

+		sdmmcbuffer,

+		data_buf,

+		sizeof(data_buf),

+		dma_table,

+		DMADL_CNT_MAX

+};

+

+void getdir(SdmmcDriver *sdmmcp);

+/*

+ * Application entry point.

+ */

+int main(void) {

+

+	/*

+	 * System initializations.

+	 * - HAL initialization, this also initializes the configured device drivers

+	 *   and performs the board-specific initializations.

+	 * - Kernel initialization, the main() function becomes a thread and the

+	 *   RTOS is active.

+	 */

+	halInit();

+	chSysInit();

+

+	/*

+	 * Activates the serial driver 0 using the driver default configuration.

+	 */

+	sdStart(&SD1, &sdcfg);

+

+	/* Redirecting  UART0 RX on PD2 and UART0 TX on PD3. */

+	palSetGroupMode(PIOD, PAL_PORT_BIT(2) | PAL_PORT_BIT(3), 0U,

+			PAL_SAMA_FUNC_PERIPH_A | PAL_MODE_SECURE);

+

+	ts = (BaseSequentialStream *) &SD1;

+

+	sdmmcInit();

+

+	sdmmcStart(&SDMMCD1, &sdmmc_slot1_cfg);

+

+	if (SDMMCD1.state != MCID_INIT_ERROR) {

+

+		chprintf(ts,"starting MMC Demo\n\r");

+

+		if (sdmmcOpenDevice(&SDMMCD1)) {

+

+			//sdmmcShowDeviceInfo(&SDMMCD1);

+			if ( sdmmcMountVolume(&SDMMCD1,&fs_header) ) {

+				chprintf(ts,"reading files:\n\r");

+				getdir(&SDMMCD1);

+			}

+			sdmmcCloseDevice(&SDMMCD1);

+		}

+

+

+	} else {

+		chprintf(ts,"error,stopping MMC\n\r");

+		sdmmcStop(&SDMMCD1);

+	}

+

+	/*

+	 * Creates the blinker thread.

+	 */

+	chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);

+

+	/*

+	 * Normal main() thread activity, in this demo it does nothing except

+	 * sleeping in a loop and check the button state.

+	 */

+	while (true) {

+		chThdSleepMilliseconds(500);

+	}

+}

+

+

+bool sdmmcGetInstance(uint8_t index, SdmmcDriver **sdmmcp)

+{

+	if (index == SDMMCD1.config->slot_id) {

+		*sdmmcp = &SDMMCD1;

+		return true;

+	}

+	return false;

+}

+

+void getdir(SdmmcDriver *sdmmcp)

+{

+	const TCHAR drive_path[] = { '0' + sdmmcp->config->slot_id, ':', '\0' };

+	DIR dir = { .sect = 0 };

+	FILINFO fno = { 0 };

+	FRESULT res;

+	bool is_dir;

+

+	res = f_opendir(&dir, drive_path);

+	if (res != FR_OK) {

+		chprintf(ts,"Failed to open dir, error %d\n\r", res);

+		return;

+	}

+	chprintf(ts,"files in the root directory:\n\r");

+	for (;;) {

+		res = f_readdir(&dir, &fno);

+		if (res != FR_OK) {

+			chprintf(ts,"cannot read dir, error (%d)\n\r", res);

+			break;

+		}

+		if (fno.fname[0] == '\0')

+			break;

+		is_dir = fno.fattrib & AM_DIR ? true : false;

+		chprintf(ts,"    %s%s%c\n\r", is_dir ? "[" : "", fno.fname,

+				is_dir ? ']' : ' ');

+	}

+

+	res = f_closedir(&dir);

+}

+

+

+