Add AVR XMega PAL low level driver files.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10376 35acf78f-673a-0410-8e92-d51de3d6d3f4

3 files changed, 480 insertions, 0 deletions

diff --git a/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/driver.mk b/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/driver.mk
new file mode 100644
index 000000000..ae1d395da
--- /dev/null
+++ b/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/driver.mk
@@ -0,0 +1,9 @@
+ifeq ($(USE_SMART_BUILD),yes)

+ifneq ($(findstring HAL_USE_PAL TRUE,$(HALCONF)),)

+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/hal_pal_lld.c

+endif

+else

+PLATFORMSRC += $(CHIBIOS)/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/hal_pal_lld.c

+endif

+

+PLATFORMINC += $(CHIBIOS)/os/hal/ports/AVR/XMEGA/LLD/GPIOv1

diff --git a/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/hal_pal_lld.c b/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/hal_pal_lld.c
new file mode 100644
index 000000000..e7f220da4
--- /dev/null
+++ b/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/hal_pal_lld.c
@@ -0,0 +1,157 @@
+/*

+    ChibiOS - Copyright (C) 2017 Theodore Ateba

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    GPIOv1/hal_pal_lld.c

+ * @brief   AVR XMEGA GPIO low level driver source file.

+ *

+ * @addtogroup PAL

+ * @{

+ */

+

+#include "hal.h"

+

+#if HAL_USE_PAL || defined(__DOXYGEN__)

+

+/*===========================================================================*/

+/* Driver exported variables.                                                */

+/*===========================================================================*/

+

+/*===========================================================================*/

+/* Driver local variables and types.                                         */

+/*===========================================================================*/

+

+/*===========================================================================*/

+/* Driver local functions.                                                   */

+/*===========================================================================*/

+

+/*===========================================================================*/

+/* Driver interrupt handlers.                                                */

+/*===========================================================================*/

+

+/*===========================================================================*/

+/* Driver exported functions.                                                */

+/*===========================================================================*/

+

+/**

+ * @brief   AVR GPIO ports configuration.

+ * @details GPIO registers initialization.

+ *

+ * @param[in] config    the XMEGA AVR ports configuration

+ *

+ * @notapi

+ */

+void _pal_lld_init(const PALConfig *config) {

+

+#if defined(PORTA) || defined(__DOXYGEN__)

+  PORTA.OUT = config->porta.out;

+  PORTA.DIR = config->porta.dir;

+#endif

+

+#if defined(PORTB) || defined(__DOXYGEN__)

+  PORTB.OUT = config->portb.out;

+  PORTB.DIR = config->portb.dir;

+#endif

+

+#if defined(PORTC) || defined(__DOXYGEN__)

+  PORTC.OUT = config->portc.out;

+  PORTC.DIR = config->portc.dir;

+#endif

+

+#if defined(PORTD) || defined(__DOXYGEN__)

+  PORTD.OUT = config->portd.out;

+  PORTD.DIR = config->portd.dir;

+#endif

+

+#if defined(PORTE) || defined(__DOXYGEN__)

+  PORTE.OUT = config->porte.out;

+  PORTE.DIR = config->porte.dir;

+#endif

+

+#if defined(PORTF) || defined(__DOXYGEN__)

+  PORTF.OUT = config->portf.out;

+  PORTF.DIR = config->portf.dir;

+#endif

+

+#if defined(PORTG) || defined(__DOXYGEN__)

+  PORTG.OUT = config->portg.out;

+  PORTG.DIR = config->portg.dir;

+#endif

+

+#if defined(PORTH) || defined(__DOXYGEN__)

+  PORTH.OUT = config->porth.out;

+  PORTH.DIR = config->porth.dir;

+#endif

+

+#if defined(PORTJ) || defined(__DOXYGEN__)

+  PORTJ.OUT = config->portj.out;

+  PORTJ.DIR = config->portj.dir;

+#endif

+

+#if defined(PORTK) || defined(__DOXYGEN__)

+  PORTK.OUT = config->portk.out;

+  PORTK.DIR = config->portk.dir;

+#endif

+

+#if defined(PORTL) || defined(__DOXYGEN__)

+  PORTL.OUT = config->portl.out;

+  PORTL.DIR = config->portl.dir;

+#endif

+}

+

+/**

+ * @brief   Pads mode setup.

+ * @details This function programs a pads group belonging to the same port

+ *          with the specified mode.

+ *

+ * @param[in] port  the port identifier

+ * @param[in] mask  the group mask

+ * @param[in] mode  the mode

+ *

+ * @note This function is not meant to be invoked directly by the application

+ *       code.

+ * @note @p PAL_MODE_UNCONNECTED is implemented as output as recommended by

+ *       the AVR Family User's Guide. Unconnected pads are set to input

+ *       with pull-up by default.

+ *

+ * @notapi

+ */

+void _pal_lld_setgroupmode(ioportid_t     port,

+                           ioportmask_t   mask,

+                           iomode_t       mode) {

+

+  switch (mode) {

+  case PAL_MODE_RESET:

+  case PAL_MODE_INPUT:

+  case PAL_MODE_INPUT_ANALOG:

+    port->DIRCLR  = mask;

+    port->OUT     = mask;

+    break;

+  case PAL_MODE_UNCONNECTED:

+  case PAL_MODE_INPUT_PULLUP:

+    port->DIRCLR  = mask;

+    port->OUT     = mask;

+    break;

+  case PAL_MODE_OUTPUT_PUSHPULL:

+    port->DIRSET  = mask;

+    break;

+  }

+}

+

+#endif /* HAL_USE_PAL */

+

+/** @} */

+

diff --git a/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/hal_pal_lld.h b/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/hal_pal_lld.h
new file mode 100644
index 000000000..9e98a66da
--- /dev/null
+++ b/os/hal/ports/AVR/XMEGA/LLD/GPIOv1/hal_pal_lld.h
@@ -0,0 +1,314 @@
+/*

+    ChibiOS - Copyright (C) 2017 Theodore Ateba

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    GPIOv1/hal_pal_lld.h

+ * @brief   AVR XMEGA GPIO low level driver header file.

+ *

+ * @addtogroup PAL

+ * @{

+ */

+

+#ifndef HAL_PAL_LLD_H

+#define HAL_PAL_LLD_H

+

+#if HAL_USE_PAL || defined(__DOXYGEN__)

+

+/*===========================================================================*/

+/* Unsupported modes and specific modes.                                     */

+/*===========================================================================*/

+

+#undef PAL_MODE_INPUT_PULLDOWN

+#undef PAL_MODE_OUTPUT_OPENDRAIN

+

+/*===========================================================================*/

+/* I/O Ports Types and constants.                                            */

+/*===========================================================================*/

+

+/**

+ * @brief   Width, in bits, of an I/O port.

+ */

+#define PAL_IOPORTS_WIDTH 8

+

+/**

+ * @brief   Whole port mask.

+ * @details This macro specifies all the valid bits into a port.

+ */

+#define PAL_WHOLE_PORT ((ioportmask_t)0xFF)

+

+/**

+ * @brief   AVR setup registers.

+ */

+typedef struct {

+  uint8_t  out;

+  uint8_t  dir;

+} avr_gpio_setup_t;

+

+/**

+ * @brief   AVR registers block.

+ * @note    On some devices registers do not follow this layout on some

+ *          ports, the ports with abnormal layout cannot be used through

+ *          PAL driver. Example: PORT F on Mega128.

+ */

+typedef struct {

+  volatile uint8_t  in;

+  volatile uint8_t  dir;

+  volatile uint8_t  out;

+} avr_gpio_registers_t;

+

+/**

+ * @brief   Generic I/O ports static initializer.

+ * @details An instance of this structure must be passed to @p palInit() at

+ *          system startup time in order to initialized the digital I/O

+ *          subsystem. This represents only the initial setup, specific pads

+ *          or whole ports can be reprogrammed at later time.

+ */

+typedef struct {

+#if defined(PORTA) || defined(__DOXYGEN__)

+  avr_gpio_setup_t porta;

+#endif

+#if defined(PORTB) || defined(__DOXYGEN__)

+  avr_gpio_setup_t portb;

+#endif

+#if defined(PORTC) || defined(__DOXYGEN__)

+  avr_gpio_setup_t portc;

+#endif

+#if defined(PORTD) || defined(__DOXYGEN__)

+  avr_gpio_setup_t portd;

+#endif

+#if defined(PORTE) || defined(__DOXYGEN__)

+  avr_gpio_setup_t porte;

+#endif

+#if defined(PORTF) || defined(__DOXYGEN__)

+  avr_gpio_setup_t portf;

+#endif

+#if defined(PORTG) || defined(__DOXYGEN__)

+  avr_gpio_setup_t portg;

+#endif

+#if defined(PORTH) || defined(__DOXYGEN__)

+  avr_gpio_setup_t porth;

+#endif

+#if defined(PORTJ) || defined(__DOXYGEN__)

+  avr_gpio_setup_t portj;

+#endif

+#if defined(PORTK) || defined(__DOXYGEN__)

+  avr_gpio_setup_t portk;

+#endif

+#if defined(PORTL) || defined(__DOXYGEN__)

+  avr_gpio_setup_t portl;

+#endif

+} PALConfig;

+

+/**

+ * @brief   Digital I/O port sized unsigned type.

+ */

+typedef uint8_t ioportmask_t;

+

+/**

+ * @brief   Digital I/O modes.

+ */

+typedef uint8_t iomode_t;

+

+/** 

+ * @brief   Port Identifier.

+ * @details This type can be a scalar or some kind of pointer, do not make

+ *          any assumption about it, use the provided macros when populating

+ *          variables of this type.

+ */

+//typedef volatile avr_gpio_registers_t * ioportid_t;

+typedef volatile PORT_t * ioportid_t;

+

+/*===========================================================================*/

+/* I/O Ports Identifiers.                                                    */

+/*===========================================================================*/

+

+#if defined(PORTA) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port A identifier.

+ */

+#define IOPORT1     (&PORTA)

+#endif

+

+#if defined(PORTB) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port B identifier.

+ */

+#define IOPORT2     (&PORTB)

+#endif

+

+#if defined(PORTC) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port C identifier.

+ */

+#define IOPORT3     (&PORTC)

+#endif

+

+#if defined(PORTD) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port D identifier.

+ */

+#define IOPORT4     (&PORTD)

+#endif

+

+#if defined(PORTE) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port E identifier.

+ */

+#define IOPORT5     (&PORTE)

+#endif

+

+#if defined(PORTF) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port F identifier.

+ */

+#define IOPORT6     (&PORTF)

+#endif

+

+#if defined(PORTG) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port G identifier.

+ */

+#define IOPORT7     (&PORTG)

+#endif

+

+#if defined(PORTH) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port H identifier.

+ */

+#define IOPORT8     (&PORTH)

+#endif

+

+#if defined(PORTJ) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port J identifier.

+ */

+#define IOPORT9     (&PORTJ)

+#endif

+

+#if defined(PORTK) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port K identifier.

+ */

+#define IOPORT10    (&PORTK)

+#endif

+

+#if defined(PORTL) || defined(__DOXYGEN__)

+/**

+ * @brief   GPIO port L identifier.

+ */

+#define IOPORT11    (&PORTL)

+#endif

+

+/*===========================================================================*/

+/* Implementation, some of the following macros could be implemented as      */

+/* functions, if so please put them in hal_pal_lld.c.                        */

+/*===========================================================================*/

+

+/**

+ * @brief   Low level PAL subsystem initialization.

+ *

+ * @param[in] config the architecture-dependent ports configuration

+ *

+ * @notapi

+ */

+#define pal_lld_init(config) _pal_lld_init(config)

+

+/**

+ * @brief   Reads the physical I/O port states.

+ *

+ * @param[in] port      port identifier

+ * @return              The port bits.

+ *

+ * @notapi

+ */

+#define pal_lld_readport(port) ((port)->IN)

+

+/**

+ * @brief   Reads the output latch.

+ * @details The purpose of this function is to read back the latched output

+ *          value.

+ *

+ * @param[in] port      port identifier

+ * @return              The latched logical states.

+ *

+ * @notapi

+ */

+#define pal_lld_readlatch(port) ((port)->OUT)

+

+/**

+ * @brief   Writes a bits mask on a I/O port.

+ *

+ * @param[in] port      port identifier

+ * @param[in] bits      bits to be written on the specified port

+ *

+ * @notapi

+ */

+#define pal_lld_writeport(port, bits) ((port)->OUT = bits)

+

+/**

+ * @brief   Pads group mode setup.

+ * @details This function programs a pads group belonging to the same port

+ *          with the specified mode.

+ * @note    Programming an unknown or unsupported mode is silently ignored.

+ *

+ * @param[in] port      port identifier

+ * @param[in] mask      group mask

+ * @param[in] offset    group bit offset within the port

+ * @param[in] mode      group mode

+ *

+ * @notapi

+ */

+#define pal_lld_setgroupmode(port, mask, offset, mode)                      \

+  _pal_lld_setgroupmode(port, mask << offset, mode)

+

+/**

+ * @brief   Sets a pad logical state to @p PAL_HIGH.

+ *

+ * @param[in] port      port identifier

+ * @param[in] pad       pad number within the port

+ *

+ * @notapi

+ */

+#define pal_lld_setpad(port, pad)     ((port)->OUTSET |= (1 << pad))

+

+/**

+ * @brief   Clears a pad logical state to @p PAL_LOW.

+ *

+ * @param[in] port      port identifier

+ * @param[in] pad       pad number within the port

+ *

+ * @notapi

+ */

+#define pal_lld_clearpad(port, pad)   ((port)->OUTCLR |= (1 << pad))

+

+extern ROMCONST PALConfig pal_default_config;

+

+#ifdef __cplusplus

+extern "C" {

+#endif

+  void _pal_lld_init(const PALConfig *config);

+  void _pal_lld_setgroupmode(ioportid_t port,

+                             ioportmask_t mask,

+                             iomode_t mode);

+#ifdef __cplusplus

+}

+#endif

+

+#endif /* HAL_USE_PAL */

+

+#endif /* HAL_PAL_LLD_H */

+

+/** @} */