git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@1102 35acf78f-673a-0410-8e92-d51de3d6d3f4

5 files changed, 0 insertions, 841 deletions

diff --git a/os/ports/GCC/MSP430/msp430_serial.c b/os/ports/GCC/MSP430/msp430_serial.c
deleted file mode 100644
index a7da03c60..000000000
--- a/os/ports/GCC/MSP430/msp430_serial.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.

-

-    This file is part of ChibiOS/RT.

-

-    ChibiOS/RT is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/RT is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/**

- * @file MSP430/msp430_serial.c

- * @brief MSP430 Serial driver code.

- * @addtogroup MSP430_SERIAL

- * @{

- */

-

-#include <ch.h>

-#include <signal.h>

-

-#include "board.h"

-#include "msp430_serial.h"

-

-static void SetError(uint8_t urctl, FullDuplexDriver *com) {

-  dflags_t sts = 0;

-

-  if (urctl & OE)

-    sts |= SD_OVERRUN_ERROR;

-  if (urctl & PE)

-    sts |= SD_PARITY_ERROR;

-  if (urctl & FE)

-    sts |= SD_FRAMING_ERROR;

-  if (urctl & BRK)

-    sts |= SD_BREAK_DETECTED;

-  chSysLockFromIsr();

-  chFDDAddFlagsI(com, sts);

-  chSysUnlockFromIsr();

-}

-

-#if USE_MSP430_USART0 || defined(__DOXYGEN__)

-

-/** @brief USART0 serial driver identifier.*/

-FullDuplexDriver COM1;

-

-static uint8_t ib1[SERIAL_BUFFERS_SIZE];

-static uint8_t ob1[SERIAL_BUFFERS_SIZE];

-

-CH_IRQ_HANDLER(USART0TX_VECTOR) {

-  msg_t b;

-

-  CH_IRQ_PROLOGUE();

-

-  chSysLockFromIsr();

-  b = chFDDRequestDataI(&COM1);

-  chSysUnlockFromIsr();

-  if (b < Q_OK)

-    U0IE &= ~UTXIE0;

-  else

-    U0TXBUF = b;

-

-  CH_IRQ_EPILOGUE();

-}

-

-CH_IRQ_HANDLER(USART0RX_VECTOR) {

-  uint8_t urctl;

-

-  CH_IRQ_PROLOGUE();

-

-  if ((urctl = U0RCTL) & RXERR)

-    SetError(urctl, &COM1);

-  chSysLockFromIsr();

-  chFDDIncomingDataI(&COM1, U0RXBUF);

-  chSysUnlockFromIsr();

-

-  CH_IRQ_EPILOGUE();

-}

-

-static void OutNotify1(void) {

-

-  if (!(U0IE & UTXIE0)) {

-    chSysLockFromIsr();

-    U0TXBUF = (uint8_t)chFDDRequestDataI(&COM1);

-    chSysUnlockFromIsr();

-    U0IE |= UTXIE0;

-  }

-}

-

-/**

- * @brief USART0 setup.

- * @details This function must be invoked with interrupts disabled.

- * @param div The divider value as calculated by the @p UBR() macro.

- * @param mod The value for the @p U0MCTL register.

- * @param ctl The value for the @p U0CTL register.

- * @note Does not reset the I/O queues.

- */

-void usart0_setup(uint16_t div, uint8_t mod, uint8_t ctl) {

-

-  U0CTL = SWRST;                /* Resets the USART, it should already be */

-  /* USART init */

-  U0TCTL = SSEL0 | SSEL1;       /* SMCLK as clock source */

-  U0MCTL = mod;                 /* Modulator */

-  U0BR1 = (uint8_t)(div >> 8);  /* Divider high */

-  U0BR0 = (uint8_t)(div >> 0);  /* Divider low */

-  /* Clear USART status */

-  (void)U0RXBUF;

-  U0RCTL = 0;

-  /* USART enable */

-  P3SEL |= BV(4) + BV(5);       /* I/O pins for USART 0 */

-  U0ME |= UTXE0 + URXE0;        /* Enables the USART */

-  U0CTL = ctl & ~SWRST;         /* Various settings, clears reset state */

-  U0IE |= URXIE0;               /* Enables RX interrupt */

-}

-#endif /* USE_MSP430_USART0 */

-

-#if USE_MSP430_USART1 || defined(__DOXYGEN__)

-

-/** @brief USART1 serial driver identifier.*/

-FullDuplexDriver COM2;

-

-static uint8_t ib2[SERIAL_BUFFERS_SIZE];

-static uint8_t ob2[SERIAL_BUFFERS_SIZE];

-

-CH_IRQ_HANDLER(USART1TX_VECTOR) {

-  msg_t b;

-

-  CH_IRQ_PROLOGUE();

-

-  chSysLockFromIsr();

-  b = chFDDRequestDataI(&COM2);

-  chSysUnlockFromIsr();

-  if (b < Q_OK)

-    U1IE &= ~UTXIE1;

-  else

-    U1TXBUF = b;

-

-  CH_IRQ_EPILOGUE();

-}

-

-CH_IRQ_HANDLER(USART1RX_VECTOR) {

-  uint8_t urctl;

-

-  CH_IRQ_PROLOGUE();

-

-  if ((urctl = U1RCTL) & RXERR)

-    SetError(urctl, &COM2);

-  chSysLockFromIsr();

-  chFDDIncomingDataI(&COM2, U1RXBUF);

-  chSysUnlockFromIsr();

-

-  CH_IRQ_EPILOGUE();

-}

-

-static void OutNotify2(void) {

-

-  if (!(U1IE & UTXIE1)) {

-    U1TXBUF = (uint8_t)chFDDRequestDataI(&COM2);

-    U1IE |= UTXIE1;

-  }

-}

-

-/**

- * @brief USART1 setup.

- * @details This function must be invoked with interrupts disabled.

- * @param[in] div the divider value as calculated by the @p UBR() macro

- * @param[in] mod the value for the @p U1MCTL register

- * @param[in] ctl the value for the @p U1CTL register.

- * @note Must be invoked with interrupts disabled.

- * @note Does not reset the I/O queues.

- */

-void usart1_setup(uint16_t div, uint8_t mod, uint8_t ctl) {

-

-  U1CTL = SWRST;                /* Resets the USART, it should already be */

-  /* USART init */

-  U1TCTL = SSEL0 | SSEL1;       /* SMCLK as clock source */

-  U1MCTL = mod;                 /* Modulator */

-  U1BR1 = (uint8_t)(div >> 8);  /* Divider high */

-  U1BR0 = (uint8_t)(div >> 0);  /* Divider low */

-  /* Clear USART status */

-  (void)U0RXBUF;

-  U1RCTL = 0;

-  /* USART enable */

-  P3SEL |= BV(6) + BV(7);       /* I/O pins for USART 1 */

-  U1ME |= UTXE0 + URXE0;        /* Enables the USART */

-  U1CTL = ctl & ~SWRST;         /* Various settings, clears reset state */

-  U1IE |= URXIE0;               /* Enables RX interrupt */

-}

-#endif

-

-/**

- * @brief Serial driver initialization.

- * @note The serial ports are initialized at @p 38400-8-N-1 by default.
- */

-void serial_init(void) {

-

-  /* I/O queues setup.*/

-#if USE_MSP430_USART0

-  chFDDInit(&COM1, ib1, sizeof ib1, NULL, ob1, sizeof ob1, OutNotify1);

-  usart0_setup(UBR(DEFAULT_USART_BITRATE), 0, CHAR);

-#endif

-

-#if USE_MSP430_USART1

-  chFDDInit(&COM2, ib2, sizeof ib2, NULL, ob2, sizeof ob2, OutNotify2);

-  usart1_setup(UBR(DEFAULT_USART_BITRATE), 0, CHAR);

-#endif

-}

-

-/** @} */

diff --git a/os/ports/GCC/MSP430/msp430_serial.h b/os/ports/GCC/MSP430/msp430_serial.h
deleted file mode 100644
index 487dc22ec..000000000
--- a/os/ports/GCC/MSP430/msp430_serial.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.

-

-    This file is part of ChibiOS/RT.

-

-    ChibiOS/RT is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/RT is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/**

- * @file MSP430/msp430_serial.h

- * @brief MSP430 Serial driver macros and structures.

- * @addtogroup MSP430_SERIAL

- * @{

- */

-

-#ifndef _MSP430_SERIAL_H_

-#define _MSP430_SERIAL_H_

-

-/**

- * @brief Serial buffers size.

- * @details Configuration parameter, you can change the depth of the queue

- * buffers depending on the requirements of your application.

- * @note The default is 32 bytes for both the transmission and receive buffers.

- */

-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)

-#define SERIAL_BUFFERS_SIZE 32

-#endif

-

-/**

- * @brief Default bit rate.

- * @details Configuration parameter, at startup the UARTs are configured at

- * this speed.

- * @note It is possible to use @p SetUART() in order to change the working

- *       parameters at runtime.

- */

-#if !defined(DEFAULT_USART_BITRATE) || defined(__DOXYGEN__)

-#define DEFAULT_USART_BITRATE 38400

-#endif

-

-/**

- * @brief USART0 driver enable switch.

- * @details If set to @p TRUE the support for USART0 is included.

- * @note The default is @p TRUE.
- */

-#if !defined(USE_MSP430_USART0) || defined(__DOXYGEN__)

-#define USE_MSP430_USART0 TRUE

-#endif

-

-/**

- * @brief USART1 driver enable switch.

- * @details If set to @p TRUE the support for USART1 is included.

- * @note The default is @p FALSE.

- */

-#if !defined(USE_MSP430_USART1) || defined(__DOXYGEN__)

-#define USE_MSP430_USART1 FALSE

-#endif

-

-/**

- * @brief Macro for baud rate computation.

- * @note Make sure the final baud rate is within tolerance.

- */

-#define UBR(b) (SMCLK / (b))

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void serial_init(void);

-  void usart0_setup(uint16_t div, uint8_t mod, uint8_t ctl);

-  void usart1_setup(uint16_t div, uint8_t mod, uint8_t ctl);

-#ifdef __cplusplus

-}

-#endif

-

-/** @cond never*/

-extern FullDuplexDriver COM1, COM2;

-/** @endcond*/

-

-#endif /* _MSP430_SERIAL_H_ */

-

-/** @} */

diff --git a/os/ports/GCC/MSP430/pal_lld.c b/os/ports/GCC/MSP430/pal_lld.c
deleted file mode 100644
index 885a58dbc..000000000
--- a/os/ports/GCC/MSP430/pal_lld.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.

-

-    This file is part of ChibiOS/RT.

-

-    ChibiOS/RT is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/RT is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/**

- * @file MSP430/pal_lld.c

- * @brief MSP430 Digital I/O low level driver code

- * @addtogroup MSP430_PAL

- * @{

- */

-

-#include <ch.h>

-#include <pal.h>

-

-/**

- * @brief MSP430 I/O ports configuration.

- *

- * @param[in] config the MSP430 ports configuration

- *

- * @note The @p PxIFG, @p PxIE and @p PxSEL registers are cleared. @p PxOUT

- *       and @p PxDIR are configured as specified.

- */

-void _pal_lld_init(const MSP430DIOConfig *config) {

-

-#if defined(__MSP430_HAS_PORT1__) || defined(__MSP430_HAS_PORT1_R__)

-  IOPORT_A->iop_full.ie.reg_p = 0;

-  IOPORT_A->iop_full.ifg.reg_p = 0;

-  IOPORT_A->iop_full.sel.reg_p = 0;

-  IOPORT_A->iop_common.out = config->P1Data.out;

-  IOPORT_A->iop_common.dir = config->P1Data.dir;

-#endif

-

-#if defined(__MSP430_HAS_PORT2__) || defined(__MSP430_HAS_PORT2_R__)

-  IOPORT_B->iop_full.ie.reg_p = 0;

-  IOPORT_B->iop_full.ifg.reg_p = 0;

-  IOPORT_B->iop_full.sel.reg_p = 0;

-  IOPORT_B->iop_common.out = config->P2Data.out;

-  IOPORT_B->iop_common.dir = config->P2Data.dir;

-#endif

-

-#if defined(__MSP430_HAS_PORT3__) || defined(__MSP430_HAS_PORT3_R__)

-  IOPORT_C->iop_simple.sel.reg_p = 0;

-  IOPORT_C->iop_common.out = config->P3Data.out;

-  IOPORT_C->iop_common.dir = config->P3Data.dir;

-#endif

-

-#if defined(__MSP430_HAS_PORT4__) || defined(__MSP430_HAS_PORT4_R__)

-  IOPORT_D->iop_simple.sel.reg_p = 0;

-  IOPORT_D->iop_common.out = config->P4Data.out;

-  IOPORT_D->iop_common.dir = config->P4Data.dir;

-#endif

-

-#if defined(__MSP430_HAS_PORT5__) || defined(__MSP430_HAS_PORT5_R__)

-  IOPORT_E->iop_simple.sel.reg_p = 0;

-  IOPORT_E->iop_common.out = config->P5Data.out;

-  IOPORT_E->iop_common.dir = config->P5Data.dir;

-#endif

-

-#if defined(__MSP430_HAS_PORT6__) || defined(__MSP430_HAS_PORT6_R__)

-  IOPORT_F->iop_simple.sel.reg_p = 0;

-  IOPORT_F->iop_common.out = config->P6Data.out;

-  IOPORT_F->iop_common.dir = config->P6Data.dir;

-#endif

-}

-

-/**

- * @brief Pads mode setup.

- * @details This function programs a pads group belonging to the same port

- *          with the specified mode.

- *

- * @param[in] port the port identifier

- * @param[in] mask the group mask

- * @param[in] mode the mode

- *

- * @note This function is not meant to be invoked directly by the application

- *       code.

- * @note @p PAL_MODE_UNCONNECTED is implemented as output as recommended by

- *       the MSP430x1xx Family User's Guide. Unconnected pads are set to

- *       high logic state by default.

- * @note This function does not alter the @p PxSEL registers. Alternate

- *       functions setup must be handled by device-specific code.

- */

-void _pal_lld_setgroupmode(ioportid_t port,

-                           ioportmask_t mask,

-                           uint_fast8_t mode) {

-

-  switch (mode) {

-  case PAL_MODE_RESET:

-  case PAL_MODE_INPUT:

-    port->iop_common.dir.reg_p &= ~mask;

-    break;

-  case PAL_MODE_UNCONNECTED:

-    port->iop_common.out.reg_p |= mask;

-  case PAL_MODE_OUTPUT_PUSHPULL:

-    port->iop_common.dir.reg_p |= mask;

-    break;

-  }

-}

-

-/** @} */

diff --git a/os/ports/GCC/MSP430/pal_lld.h b/os/ports/GCC/MSP430/pal_lld.h
deleted file mode 100644
index 94407a849..000000000
--- a/os/ports/GCC/MSP430/pal_lld.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.

-

-    This file is part of ChibiOS/RT.

-

-    ChibiOS/RT is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/RT is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/**

- * @file MSP430/pal_lld.h

- * @brief MSP430 Digital I/O low level driver header

- * @addtogroup MSP430_PAL

- * @{

- */

-

-#ifndef _PAL_LLD_H_

-#define _PAL_LLD_H_

-

-#include <msp430x16x.h>

-

-/*===========================================================================*/

-/* Unsupported modes and specific modes                                      */

-/*===========================================================================*/

-

-#undef PAL_MODE_INPUT_PULLUP

-#undef PAL_MODE_INPUT_PULLDOWN

-#undef PAL_MODE_OUTPUT_OPENDRAIN

-

-/*===========================================================================*/

-/* I/O Ports Types and constants.                                            */

-/*===========================================================================*/

-

-/**

- * @brief Simplified MSP430 I/O port representation.

- * @details This structure represents the common part of all the MSP430 I/O

- *          ports.
- */

-struct port_common_t {

-  ioregister_t  in;

-  ioregister_t  out;

-  ioregister_t  dir;

-};

-

-/**

- * @brief Generic MSP430 I/O port.
- */

-union __ioport {

-  struct port_common_t iop_common;

-  struct port_simple_t iop_simple;

-  struct port_full_t iop_full;

-};

-

-/**

- * @brief Setup registers common to all the MSP430 ports.
- */

-typedef struct  {

-  ioregister_t  out;

-  ioregister_t  dir;

-} msp430_dio_setup_t;

-

-/**

- * @brief MSP430 I/O ports static initializer.

- * @details An instance of this structure must be passed to @p palInit() at

- *          system startup time in order to initialized the digital I/O

- *          subsystem. This represents only the initial setup, specific pads

- *          or whole ports can be reprogrammed at later time.
- */

-typedef struct {

-#if defined(__MSP430_HAS_PORT1__) ||                                    \

-    defined(__MSP430_HAS_PORT1_R__) ||                                  \

-    defined(__DOXYGEN__)

-  /** @brief Port 1 setup data.*/

-  msp430_dio_setup_t    P1Data;

-#endif

-#if defined(__MSP430_HAS_PORT2__) ||                                    \

-    defined(__MSP430_HAS_PORT2_R__) ||                                  \

-    defined(__DOXYGEN__)

-  /** @brief Port 2 setup data.*/

-  msp430_dio_setup_t    P2Data;

-#endif

-#if defined(__MSP430_HAS_PORT3__) ||                                    \

-    defined(__MSP430_HAS_PORT3_R__) ||                                  \

-    defined(__DOXYGEN__)

-  /** @brief Port 3 setup data.*/

-  msp430_dio_setup_t    P3Data;

-#endif

-#if defined(__MSP430_HAS_PORT4__) ||                                    \

-    defined(__MSP430_HAS_PORT4_R__) ||                                  \

-    defined(__DOXYGEN__)

-  /** @brief Port 4 setup data.*/

-  msp430_dio_setup_t    P4Data;

-#endif

-#if defined(__MSP430_HAS_PORT5__) ||                                    \

-    defined(__MSP430_HAS_PORT5_R__) ||                                  \

-    defined(__DOXYGEN__)

-  /** @brief Port 5 setup data.*/

-  msp430_dio_setup_t    P5Data;

-#endif

-#if defined(__MSP430_HAS_PORT6__) ||                                    \

-    defined(__MSP430_HAS_PORT6_R__) ||                                  \

-    defined(__DOXYGEN__)

-  /** @brief Port 6 setup data.*/

-  msp430_dio_setup_t    P6Data;

-#endif

-} MSP430DIOConfig;

-

-/**

- * @brief Width, in bits, of an I/O port.
- */

-#define PAL_IOPORTS_WIDTH 8

-

-/**

- * @brief Whole port mask.

- * @brief This macro specifies all the valid bits into a port.

- */

-#define PAL_WHOLE_PORT ((ioportmask_t)0xFF)

-

-/**

- * @brief Digital I/O port sized unsigned type.
- */

-typedef uint8_t ioportmask_t;

-

-/**

- * @brief Port Identifier.

- * @details This type can be a scalar or some kind of pointer, do not make

- *          any assumption about it, use the provided macros when populating

- *          variables of this type.
- */

-typedef union __ioport * ioportid_t;

-

-/*===========================================================================*/

-/* I/O Ports Identifiers.                                                    */

-/*===========================================================================*/

-

-/**

- * @brief I/O port A identifier.

- * @details This port identifier is mapped on the MSP430 port 1 (P1).

- */

-#if defined(__MSP430_HAS_PORT1__) ||                                    \

-    defined(__MSP430_HAS_PORT1_R__) ||                                  \

-    defined(__DOXYGEN__)

-#define IOPORT_A        ((ioportid_t)0x0020)

-#endif

-

-/**

- * @brief I/O port B identifier.

- * @details This port identifier is mapped on the MSP430 port 2 (P2).

- */

-#if defined(__MSP430_HAS_PORT2__) ||                                    \

-    defined(__MSP430_HAS_PORT2_R__) ||                                  \

-    defined(__DOXYGEN__)

-#define IOPORT_B        ((ioportid_t)0x0028)

-#endif

-

-/**

- * @brief I/O port C identifier.

- * @details This port identifier is mapped on the MSP430 port 3 (P3).

- */

-#if defined(__MSP430_HAS_PORT3__) ||                                    \

-    defined(__MSP430_HAS_PORT3_R__) ||                                  \

-    defined(__DOXYGEN__)

-#define IOPORT_C        ((ioportid_t)0x0018)

-#endif

-

-/**

- * @brief I/O port D identifier.

- * @details This port identifier is mapped on the MSP430 port 4 (P4).

- */

-#if defined(__MSP430_HAS_PORT4__) ||                                    \

-    defined(__MSP430_HAS_PORT4_R__) ||                                  \

-    defined(__DOXYGEN__)

-#define IOPORT_D        ((ioportid_t)0x001c)

-#endif

-

-/**

- * @brief I/O port E identifier.

- * @details This port identifier is mapped on the MSP430 port 5 (P5).

- */

-#if defined(__MSP430_HAS_PORT5__) ||                                    \

-    defined(__MSP430_HAS_PORT5_R__) ||                                  \

-    defined(__DOXYGEN__)

-#define IOPORT_E        ((ioportid_t)0x0030)

-#endif

-

-/**

- * @brief I/O port F identifier.

- * @details This port identifier is mapped on the MSP430 port 6 (P6).

- */

-#if defined(__MSP430_HAS_PORT6__) ||                                    \

-    defined(__MSP430_HAS_PORT6_R__) ||                                  \

-    defined(__DOXYGEN__)

-#define IOPORT_F        ((ioportid_t)0x0034)

-#endif

-

-/*===========================================================================*/

-/* Implementation, some of the following macros could be implemented as      */

-/* functions, if so please put them in a file named pal_lld.c.               */

-/*===========================================================================*/

-

-/**

- * @brief Low level PAL subsystem initialization.

- * @details In MSP430 programs all the ports as input.

- *

- * @param[in] config the MSP430 ports configuration

- */

-#define pal_lld_init(config) _pal_lld_init(config)

-

-/**

- * @brief Reads the physical I/O port states.

- * @details This function is implemented by reading the PxIN register, the

- *          implementation has no side effects.

- *

- * @param[in] port the port identifier

- * @return The port bits.

- *

- * @note This function is not meant to be invoked directly by the application

- *       code.

- */

-#define pal_lld_readport(port) ((port)->iop_common.in.reg_p)

-

-/**

- * @brief Reads the output latch.

- * @details This function is implemented by reading the PxOUT register, the

- *          implementation has no side effects.

- *

- * @param[in] port the port identifier

- * @return The latched logical states.

- *

- * @note This function is not meant to be invoked directly by the application

- *       code.

- */

-#define pal_lld_readlatch(port) ((port)->iop_common.out.reg_p)

-

-/**

- * @brief Writes a bits mask on a I/O port.

- * @details This function is implemented by writing the PxOUT register, the

- *          implementation has no side effects.

- *

- * @param[in] port the port identifier

- * @param[in] bits the bits to be written on the specified port

- *

- * @note This function is not meant to be invoked directly by the application

- *       code.

- */

-#define pal_lld_writeport(port, bits) {                                 \

-  (port)->iop_common.out.reg_p = (bits);                                \

-}

-

-/**

- * @brief Pads group mode setup.

- * @details This function programs a pads group belonging to the same port

- *          with the specified mode.

- *

- * @param[in] port the port identifier

- * @param[in] mask the group mask

- * @param[in] mode the mode

- *

- * @note This function is not meant to be invoked directly by the application

- *       code.

- * @note @p PAL_MODE_UNCONNECTED is implemented as output as recommended by

- *       the MSP430x1xx Family User's Guide.

- * @note This function does not alter the @p PxSEL registers. Alternate

- *       functions setup must be handled by device-specific code.

- */

-#define pal_lld_setgroupmode(port, mask, mode) \

-  _pal_lld_setgroupmode(port, mask, mode)

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void _pal_lld_init(const MSP430DIOConfig *config);

-  void _pal_lld_setgroupmode(ioportid_t port,

-                             ioportmask_t mask,

-                             uint_fast8_t mode);

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* _PAL_LLD_H_ */

-

-/** @} */

diff --git a/os/ports/GCC/MSP430/port.dox b/os/ports/GCC/MSP430/port.dox
deleted file mode 100644
index 232053f06..000000000
--- a/os/ports/GCC/MSP430/port.dox
+++ /dev/null
@@ -1,127 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.

-

-    This file is part of ChibiOS/RT.

-

-    ChibiOS/RT is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/RT is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/**

- * @defgroup MSP430 MSP430

- * @details MSP430 port details. This section how the ChibiOS/RT features are

- * implemented on this architecture.

- *

- * @section MSP430_STATES Mapping of the System States in the MSP430 port

- * The ChibiOS/RT logical @ref system_states are mapped as follow in the MSP430

- * port:

- * - <b>Init</b>. This state is represented by the startup code and the

- *   initialization code before @p chSysInit() is executed. It has not a

- *   special hardware state associated.

- * - <b>Normal</b>. This is the state the system has after executing

- *   @p chSysInit(). Interrupts are enabled.

- * - <b>Suspended</b>. Interrupts are disabled.

- * - <b>Disabled</b>. Interrupts are enabled. This state is equivalent to the

- *   Suspended state because there are no fast interrupts in this architecture.

- * - <b>Sleep</b>. Not yet implemented.

- * - <b>S-Locked</b>. Interrupts are disabled.

- * - <b>I-Locked</b>. This state is equivalent to the SRI state, the

- *   @p chSysLockI() and @p chSysUnlockI() APIs do nothing (still use them in

- *   order to formally change state because this may change).

- * - <b>Serving Regular Interrupt</b>. Normal interrupt service code.

- * - <b>Serving Fast Interrupt</b>. Not present in this architecture.

- * - <b>Serving Non-Maskable Interrupt</b>. The MSP430 has several non

- *   maskable interrupt sources that can be associated to this state.

- * - <b>Halted</b>. Implemented as an infinite loop with interrupts disabled.

- * .

- * @section MSP430_NOTES The MSP430 port notes

- * - The MSP430 does not have a dedicated interrupt stack, make sure to reserve

- *     enough stack space for interrupts in each thread stack. This can be done

- *     by modifying the @p INT_REQUIRED_STACK macro into

- *     <b>./ports/MSP430/chcore.h</b>.

- * - The state of the hardware multiplier is not saved in the thread context,

- *   make sure to use it in <b>Suspended</b> state (interrupts masked).

- * - The port code does not define the switch to a low power mode for the

- *   idle thread because the MSP430 has several low power modes. You can

- *   select the proper low power mode for you application by defining the

- *   macro @p port_wait_for_interrupt().

- * .

- * @ingroup Ports

- */

-

-/**

- * @defgroup MSP430_CONF Configuration Options

- * @brief MSP430 Configuration Options.

- * @details The MSP430 port allows some architecture-specific configurations

- * settings that can be specified externally, as example on the compiler

- * command line:

- * - @p INT_REQUIRED_STACK, this value represent the amount of stack space

- *   used by the interrupt handlers.<br>

- *   The default for this value is @p 32, this space is allocated for each

- *   thread so be careful in order to not waste precious RAM space.<br>

- *   The default value is set into <b>./ports/MSP430/chcore.h</b>.

- * .

- * @ingroup MSP430

- */

-

-/**

- * @defgroup MSP430_CORE Core Port Implementation

- * @brief MSP430 specific port code, structures and macros.

- *

- * @ingroup MSP430

- * @file MSP430/chtypes.h Port types.

- * @file MSP430/chcore.h Port related structures and macros.

- * @file MSP430/chcore.c Port related code.

- */

-

-/**

- * @defgroup MSP430_DRIVERS MSP430 Drivers

- * @brief Device drivers included in the MSP430 support.

- *

- * @ingroup MSP430

- */

-

-/**

- * @defgroup MSP430_PAL I/O Ports Support

- * @brief I/O Ports peripherals support.

- * @details This module supports the MSP430 Digital I/O controller. The

- * controller supports the following features (see @ref PAL):

- * - 8 bits wide ports.

- * - Atomic set/reset/toggle functions because special MSP430 instruction set.

- * - Output latched regardless of the pad setting.

- * - Direct read of input pads regardless of the pad setting.

- * .

- * <h2>Supported Setup Modes</h2>

- * - @p PAL_MODE_RESET.

- * - @p PAL_MODE_UNCONNECTED.

- * - @p PAL_MODE_INPUT.

- * - @p PAL_MODE_OUTPUT_PUSHPULL.

- * .

- * Any attempt to setup an invalid mode is ignored.

- *

- * <h2>Suboptimal Behavior</h2>

- * Some MSP430 I/O ports features are less than optimal:

- * - Bus/group writing is not atomic.

- * - Pad/group mode setup is not atomic.

- * .

- * @ingroup MSP430_DRIVERS

- */

-

-/**

- * @defgroup MSP430_SERIAL USART Support

- * @brief USART support.

- * @details The serial driver supports both the MSP430 USARTs in asynchronous

- * mode.

- *

- * @ingroup MSP430_DRIVERS

- */