diff options
| author | Giovanni Di Sirio <gdisirio@gmail.com> | 2016-04-02 08:31:39 +0000 |
|---|---|---|
| committer | Giovanni Di Sirio <gdisirio@gmail.com> | 2016-04-02 08:31:39 +0000 |
| commit | a84c32523cb971505e03ae73409839637d8706a9 (patch) | |
| tree | 0fbdac64cba70108c3a6106e137cef741e1901ba /os/hal/ports/STM32/LLD/USARTv1/hal_serial_lld.c | |
| parent | f905d498c81714e5c846529a441ef6977908d39f (diff) | |
| download | ChibiOS-a84c32523cb971505e03ae73409839637d8706a9.tar.gz ChibiOS-a84c32523cb971505e03ae73409839637d8706a9.tar.bz2 ChibiOS-a84c32523cb971505e03ae73409839637d8706a9.zip | |
STM32 LLD renaming done.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9208 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/ports/STM32/LLD/USARTv1/hal_serial_lld.c')
| -rw-r--r-- | os/hal/ports/STM32/LLD/USARTv1/hal_serial_lld.c | 631 |
1 files changed, 631 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/LLD/USARTv1/hal_serial_lld.c b/os/hal/ports/STM32/LLD/USARTv1/hal_serial_lld.c new file mode 100644 index 000000000..c352b054f --- /dev/null +++ b/os/hal/ports/STM32/LLD/USARTv1/hal_serial_lld.c @@ -0,0 +1,631 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USARTv1/serial_lld.c
+ * @brief STM32 low level serial driver code.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief USART1 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+SerialDriver SD1;
+#endif
+
+/** @brief USART2 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+SerialDriver SD2;
+#endif
+
+/** @brief USART3 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+SerialDriver SD3;
+#endif
+
+/** @brief UART4 serial driver identifier.*/
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+SerialDriver SD4;
+#endif
+
+/** @brief UART5 serial driver identifier.*/
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+SerialDriver SD5;
+#endif
+
+/** @brief USART6 serial driver identifier.*/
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+SerialDriver SD6;
+#endif
+
+/** @brief UART7 serial driver identifier.*/
+#if STM32_SERIAL_USE_UART7 || defined(__DOXYGEN__)
+SerialDriver SD7;
+#endif
+
+/** @brief UART8 serial driver identifier.*/
+#if STM32_SERIAL_USE_UART8 || defined(__DOXYGEN__)
+SerialDriver SD8;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/** @brief Driver default configuration.*/
+static const SerialConfig default_config =
+{
+ SERIAL_DEFAULT_BITRATE,
+ 0,
+ USART_CR2_STOP1_BITS | USART_CR2_LINEN,
+ 0
+};
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief USART initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] config the architecture-dependent serial driver configuration
+ */
+static void usart_init(SerialDriver *sdp, const SerialConfig *config) {
+ USART_TypeDef *u = sdp->usart;
+
+ /* Baud rate setting.*/
+#if STM32_HAS_USART6
+ if ((sdp->usart == USART1) || (sdp->usart == USART6))
+#else
+ if (sdp->usart == USART1)
+#endif
+ u->BRR = STM32_PCLK2 / config->speed;
+ else
+ u->BRR = STM32_PCLK1 / config->speed;
+
+ /* Note that some bits are enforced.*/
+ u->CR2 = config->cr2 | USART_CR2_LBDIE;
+ u->CR3 = config->cr3 | USART_CR3_EIE;
+ u->CR1 = config->cr1 | USART_CR1_UE | USART_CR1_PEIE |
+ USART_CR1_RXNEIE | USART_CR1_TE |
+ USART_CR1_RE;
+ u->SR = 0;
+ (void)u->SR; /* SR reset step 1.*/
+ (void)u->DR; /* SR reset step 2.*/
+}
+
+/**
+ * @brief USART de-initialization.
+ * @details This function must be invoked with interrupts disabled.
+ *
+ * @param[in] u pointer to an USART I/O block
+ */
+static void usart_deinit(USART_TypeDef *u) {
+
+ u->CR1 = 0;
+ u->CR2 = 0;
+ u->CR3 = 0;
+}
+
+/**
+ * @brief Error handling routine.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] sr USART SR register value
+ */
+static void set_error(SerialDriver *sdp, uint16_t sr) {
+ eventflags_t sts = 0;
+
+ if (sr & USART_SR_ORE)
+ sts |= SD_OVERRUN_ERROR;
+ if (sr & USART_SR_PE)
+ sts |= SD_PARITY_ERROR;
+ if (sr & USART_SR_FE)
+ sts |= SD_FRAMING_ERROR;
+ if (sr & USART_SR_NE)
+ sts |= SD_NOISE_ERROR;
+ chnAddFlagsI(sdp, sts);
+}
+
+/**
+ * @brief Common IRQ handler.
+ *
+ * @param[in] sdp communication channel associated to the USART
+ */
+static void serve_interrupt(SerialDriver *sdp) {
+ USART_TypeDef *u = sdp->usart;
+ uint16_t cr1 = u->CR1;
+ uint16_t sr = u->SR;
+
+ /* Special case, LIN break detection.*/
+ if (sr & USART_SR_LBD) {
+ osalSysLockFromISR();
+ chnAddFlagsI(sdp, SD_BREAK_DETECTED);
+ u->SR = ~USART_SR_LBD;
+ osalSysUnlockFromISR();
+ }
+
+ /* Data available.*/
+ osalSysLockFromISR();
+ while (sr & (USART_SR_RXNE | USART_SR_ORE | USART_SR_NE | USART_SR_FE |
+ USART_SR_PE)) {
+ uint8_t b;
+
+ /* Error condition detection.*/
+ if (sr & (USART_SR_ORE | USART_SR_NE | USART_SR_FE | USART_SR_PE))
+ set_error(sdp, sr);
+ b = u->DR;
+ if (sr & USART_SR_RXNE)
+ sdIncomingDataI(sdp, b);
+ sr = u->SR;
+ }
+ osalSysUnlockFromISR();
+
+ /* Transmission buffer empty.*/
+ if ((cr1 & USART_CR1_TXEIE) && (sr & USART_SR_TXE)) {
+ msg_t b;
+ osalSysLockFromISR();
+ b = oqGetI(&sdp->oqueue);
+ if (b < MSG_OK) {
+ chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
+ u->CR1 = (cr1 & ~USART_CR1_TXEIE) | USART_CR1_TCIE;
+ }
+ else
+ u->DR = b;
+ osalSysUnlockFromISR();
+ }
+
+ /* Physical transmission end.*/
+ if (sr & USART_SR_TC) {
+ osalSysLockFromISR();
+ if (oqIsEmptyI(&sdp->oqueue))
+ chnAddFlagsI(sdp, CHN_TRANSMISSION_END);
+ u->CR1 = cr1 & ~USART_CR1_TCIE;
+ u->SR = ~USART_SR_TC;
+ osalSysUnlockFromISR();
+ }
+}
+
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+static void notify1(io_queue_t *qp) {
+
+ (void)qp;
+ USART1->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+static void notify2(io_queue_t *qp) {
+
+ (void)qp;
+ USART2->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+static void notify3(io_queue_t *qp) {
+
+ (void)qp;
+ USART3->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+static void notify4(io_queue_t *qp) {
+
+ (void)qp;
+ UART4->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+static void notify5(io_queue_t *qp) {
+
+ (void)qp;
+ UART5->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+static void notify6(io_queue_t *qp) {
+
+ (void)qp;
+ USART6->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_UART7 || defined(__DOXYGEN__)
+static void notify7(io_queue_t *qp) {
+
+ (void)qp;
+ UART7->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+#if STM32_SERIAL_USE_UART8 || defined(__DOXYGEN__)
+static void notify8(io_queue_t *qp) {
+
+ (void)qp;
+ UART8->CR1 |= USART_CR1_TXEIE;
+}
+#endif
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
+#if !defined(STM32_USART1_HANDLER)
+#error "STM32_USART1_HANDLER not defined"
+#endif
+/**
+ * @brief USART1 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_USART1_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD1);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
+#if !defined(STM32_USART2_HANDLER)
+#error "STM32_USART2_HANDLER not defined"
+#endif
+/**
+ * @brief USART2 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_USART2_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD2);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
+#if !defined(STM32_USART3_HANDLER)
+#error "STM32_USART3_HANDLER not defined"
+#endif
+/**
+ * @brief USART3 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_USART3_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD3);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
+#if !defined(STM32_UART4_HANDLER)
+#error "STM32_UART4_HANDLER not defined"
+#endif
+/**
+ * @brief UART4 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_UART4_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD4);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
+#if !defined(STM32_UART5_HANDLER)
+#error "STM32_UART5_HANDLER not defined"
+#endif
+/**
+ * @brief UART5 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_UART5_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD5);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
+#if !defined(STM32_USART6_HANDLER)
+#error "STM32_USART6_HANDLER not defined"
+#endif
+/**
+ * @brief USART6 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_USART6_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD6);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_UART7 || defined(__DOXYGEN__)
+#if !defined(STM32_UART7_HANDLER)
+#error "STM32_UART7_HANDLER not defined"
+#endif
+/**
+ * @brief UART7 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_UART7_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD7);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+#if STM32_SERIAL_USE_UART8 || defined(__DOXYGEN__)
+#if !defined(STM32_UART8_HANDLER)
+#error "STM32_UART8_HANDLER not defined"
+#endif
+/**
+ * @brief UART8 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(STM32_UART8_HANDLER) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ serve_interrupt(&SD8);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level serial driver initialization.
+ *
+ * @notapi
+ */
+void sd_lld_init(void) {
+
+#if STM32_SERIAL_USE_USART1
+ sdObjectInit(&SD1, NULL, notify1);
+ SD1.usart = USART1;
+#endif
+
+#if STM32_SERIAL_USE_USART2
+ sdObjectInit(&SD2, NULL, notify2);
+ SD2.usart = USART2;
+#endif
+
+#if STM32_SERIAL_USE_USART3
+ sdObjectInit(&SD3, NULL, notify3);
+ SD3.usart = USART3;
+#endif
+
+#if STM32_SERIAL_USE_UART4
+ sdObjectInit(&SD4, NULL, notify4);
+ SD4.usart = UART4;
+#endif
+
+#if STM32_SERIAL_USE_UART5
+ sdObjectInit(&SD5, NULL, notify5);
+ SD5.usart = UART5;
+#endif
+
+#if STM32_SERIAL_USE_USART6
+ sdObjectInit(&SD6, NULL, notify6);
+ SD6.usart = USART6;
+#endif
+
+#if STM32_SERIAL_USE_UART7
+ sdObjectInit(&SD7, NULL, notify7);
+ SD7.usart = UART7;
+#endif
+
+#if STM32_SERIAL_USE_UART8
+ sdObjectInit(&SD8, NULL, notify8);
+ SD8.usart = UART8;
+#endif
+}
+
+/**
+ * @brief Low level serial driver configuration and (re)start.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ * @param[in] config the architecture-dependent serial driver configuration.
+ * If this parameter is set to @p NULL then a default
+ * configuration is used.
+ *
+ * @notapi
+ */
+void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
+
+ if (config == NULL)
+ config = &default_config;
+
+ if (sdp->state == SD_STOP) {
+#if STM32_SERIAL_USE_USART1
+ if (&SD1 == sdp) {
+ rccEnableUSART1(FALSE);
+ nvicEnableVector(STM32_USART1_NUMBER, STM32_SERIAL_USART1_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_USART2
+ if (&SD2 == sdp) {
+ rccEnableUSART2(FALSE);
+ nvicEnableVector(STM32_USART2_NUMBER, STM32_SERIAL_USART2_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_USART3
+ if (&SD3 == sdp) {
+ rccEnableUSART3(FALSE);
+ nvicEnableVector(STM32_USART3_NUMBER, STM32_SERIAL_USART3_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_UART4
+ if (&SD4 == sdp) {
+ rccEnableUART4(FALSE);
+ nvicEnableVector(STM32_UART4_NUMBER, STM32_SERIAL_UART4_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_UART5
+ if (&SD5 == sdp) {
+ rccEnableUART5(FALSE);
+ nvicEnableVector(STM32_UART5_NUMBER, STM32_SERIAL_UART5_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_USART6
+ if (&SD6 == sdp) {
+ rccEnableUSART6(FALSE);
+ nvicEnableVector(STM32_USART6_NUMBER, STM32_SERIAL_USART6_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_UART7
+ if (&SD7 == sdp) {
+ rccEnableUART7(FALSE);
+ nvicEnableVector(STM32_UART7_NUMBER, STM32_SERIAL_UART7_PRIORITY);
+ }
+#endif
+#if STM32_SERIAL_USE_UART8
+ if (&SD8 == sdp) {
+ rccEnableUART8(FALSE);
+ nvicEnableVector(STM32_UART8_NUMBER, STM32_SERIAL_UART8_PRIORITY);
+ }
+#endif
+ }
+ usart_init(sdp, config);
+}
+
+/**
+ * @brief Low level serial driver stop.
+ * @details De-initializes the USART, stops the associated clock, resets the
+ * interrupt vector.
+ *
+ * @param[in] sdp pointer to a @p SerialDriver object
+ *
+ * @notapi
+ */
+void sd_lld_stop(SerialDriver *sdp) {
+
+ if (sdp->state == SD_READY) {
+ usart_deinit(sdp->usart);
+#if STM32_SERIAL_USE_USART1
+ if (&SD1 == sdp) {
+ rccDisableUSART1(FALSE);
+ nvicDisableVector(STM32_USART1_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART2
+ if (&SD2 == sdp) {
+ rccDisableUSART2(FALSE);
+ nvicDisableVector(STM32_USART2_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART3
+ if (&SD3 == sdp) {
+ rccDisableUSART3(FALSE);
+ nvicDisableVector(STM32_USART3_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_UART4
+ if (&SD4 == sdp) {
+ rccDisableUART4(FALSE);
+ nvicDisableVector(STM32_UART4_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_UART5
+ if (&SD5 == sdp) {
+ rccDisableUART5(FALSE);
+ nvicDisableVector(STM32_UART5_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_USART6
+ if (&SD6 == sdp) {
+ rccDisableUSART6(FALSE);
+ nvicDisableVector(STM32_USART6_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_UART7
+ if (&SD7 == sdp) {
+ rccDisableUART7(FALSE);
+ nvicDisableVector(STM32_UART7_NUMBER);
+ return;
+ }
+#endif
+#if STM32_SERIAL_USE_UART8
+ if (&SD8 == sdp) {
+ rccDisableUART8(FALSE);
+ nvicDisableVector(STM32_UART8_NUMBER);
+ return;
+ }
+#endif
+ }
+}
+
+#endif /* HAL_USE_SERIAL */
+
+/** @} */
|