diff options
author | Giovanni Di Sirio <gdisirio@gmail.com> | 2017-11-08 10:10:31 +0000 |
---|---|---|
committer | Giovanni Di Sirio <gdisirio@gmail.com> | 2017-11-08 10:10:31 +0000 |
commit | 46e19e85b9bd101ffa51a6118cafc8ab30a3dc9a (patch) | |
tree | f5f7fb6decf03819c8c7d8f23dadceed7fb664e7 /os/hal/ports/STM32/LLD/OTGv1/hal_usb_lld_alt.h | |
parent | d375f4e9ac2891a5037f8acc0ebf484ce424386d (diff) | |
download | ChibiOS-46e19e85b9bd101ffa51a6118cafc8ab30a3dc9a.tar.gz ChibiOS-46e19e85b9bd101ffa51a6118cafc8ab30a3dc9a.tar.bz2 ChibiOS-46e19e85b9bd101ffa51a6118cafc8ab30a3dc9a.zip |
Experimental.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10972 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/ports/STM32/LLD/OTGv1/hal_usb_lld_alt.h')
-rw-r--r-- | os/hal/ports/STM32/LLD/OTGv1/hal_usb_lld_alt.h | 626 |
1 files changed, 626 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/LLD/OTGv1/hal_usb_lld_alt.h b/os/hal/ports/STM32/LLD/OTGv1/hal_usb_lld_alt.h new file mode 100644 index 000000000..ba5e4fc2f --- /dev/null +++ b/os/hal/ports/STM32/LLD/OTGv1/hal_usb_lld_alt.h @@ -0,0 +1,626 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file OTGv1/hal_usb_lld.h
+ * @brief STM32 USB subsystem low level driver header.
+ *
+ * @addtogroup USB
+ * @{
+ */
+
+#ifndef HAL_USB_LLD_H
+#define HAL_USB_LLD_H
+
+#if HAL_USE_USB || defined(__DOXYGEN__)
+
+#include "stm32_otg.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Status stage handling method.
+ */
+#define USB_EP0_STATUS_STAGE USB_EP0_STATUS_STAGE_SW
+
+/**
+ * @brief The address can be changed immediately upon packet reception.
+ */
+#define USB_SET_ADDRESS_MODE USB_EARLY_SET_ADDRESS
+
+/**
+ * @brief Method for set address acknowledge.
+ */
+#define USB_SET_ADDRESS_ACK_HANDLING USB_SET_ADDRESS_ACK_SW
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief OTG1 driver enable switch.
+ * @details If set to @p TRUE the support for OTG_FS is included.
+ * @note The default is @p FALSE
+ */
+#if !defined(STM32_USB_USE_OTG1) || defined(__DOXYGEN__)
+#define STM32_USB_USE_OTG1 FALSE
+#endif
+
+/**
+ * @brief OTG2 driver enable switch.
+ * @details If set to @p TRUE the support for OTG_HS is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_USB_USE_OTG2) || defined(__DOXYGEN__)
+#define STM32_USB_USE_OTG2 FALSE
+#endif
+
+/**
+ * @brief OTG1 interrupt priority level setting.
+ */
+#if !defined(STM32_USB_OTG1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_USB_OTG1_IRQ_PRIORITY 14
+#endif
+
+/**
+ * @brief OTG2 interrupt priority level setting.
+ */
+#if !defined(STM32_USB_OTG2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_USB_OTG2_IRQ_PRIORITY 14
+#endif
+
+/**
+ * @brief OTG1 RX shared FIFO size.
+ * @note Must be a multiple of 4.
+ */
+#if !defined(STM32_USB_OTG1_RX_FIFO_SIZE) || defined(__DOXYGEN__)
+#define STM32_USB_OTG1_RX_FIFO_SIZE 512
+#endif
+
+/**
+ * @brief OTG2 RX shared FIFO size.
+ * @note Must be a multiple of 4.
+ */
+#if !defined(STM32_USB_OTG2_RX_FIFO_SIZE) || defined(__DOXYGEN__)
+#define STM32_USB_OTG2_RX_FIFO_SIZE 1024
+#endif
+
+/**
+ * @brief Enables HS mode on OTG2 else FS mode.
+ * @note The default is @p TRUE.
+ * @note Has effect only if @p BOARD_OTG2_USES_ULPI is defined.
+ */
+#if !defined(STM32_USE_USB_OTG2_HS) || defined(__DOXYGEN__)
+#define STM32_USE_USB_OTG2_HS TRUE
+#endif
+
+/**
+ * @brief Dedicated data pump threads priority.
+ */
+#if !defined(STM32_USB_OTG_THREAD_PRIO) || defined(__DOXYGEN__)
+#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
+#endif
+
+/**
+ * @brief Dedicated data pump threads stack size.
+ */
+#if !defined(STM32_USB_OTG_THREAD_STACK_SIZE) || defined(__DOXYGEN__)
+#define STM32_USB_OTG_THREAD_STACK_SIZE 128
+#endif
+
+/**
+ * @brief Exception priority level during TXFIFOs operations.
+ * @note Because an undocumented silicon behavior the operation of
+ * copying a packet into a TXFIFO must not be interrupted by
+ * any other operation on the OTG peripheral.
+ * This parameter represents the priority mask during copy
+ * operations. The default value only allows to call USB
+ * functions from callbacks invoked from USB ISR handlers.
+ * If you need to invoke USB functions from other handlers
+ * then raise this priority mast to the same level of the
+ * handler you need to use.
+ * @note The value zero means disabled, when disabled calling USB
+ * functions is only safe from thread level or from USB
+ * callbacks.
+ */
+#if !defined(STM32_USB_OTGFIFO_FILL_BASEPRI) || defined(__DOXYGEN__)
+#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
+#endif
+
+/**
+ * @brief Host wake-up procedure duration.
+ */
+#if !defined(USB_HOST_WAKEUP_DURATION) || defined(__DOXYGEN__)
+#define USB_HOST_WAKEUP_DURATION 2
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/* Registry checks.*/
+#if !defined(STM32_OTG_STEPPING)
+#error "STM32_OTG_STEPPING not defined in registry"
+#endif
+
+#if (STM32_OTG_STEPPING < 1) || (STM32_OTG_STEPPING > 2)
+#error "unsupported STM32_OTG_STEPPING"
+#endif
+
+#if !defined(STM32_HAS_OTG1) || !defined(STM32_HAS_OTG2)
+#error "STM32_HAS_OTGx not defined in registry"
+#endif
+
+#if STM32_HAS_OTG1 && !defined(STM32_OTG1_ENDPOINTS)
+#error "STM32_OTG1_ENDPOINTS not defined in registry"
+#endif
+
+#if STM32_HAS_OTG2 && !defined(STM32_OTG2_ENDPOINTS)
+#error "STM32_OTG2_ENDPOINTS not defined in registry"
+#endif
+
+#if STM32_HAS_OTG1 && !defined(STM32_OTG1_FIFO_MEM_SIZE)
+#error "STM32_OTG1_FIFO_MEM_SIZE not defined in registry"
+#endif
+
+#if STM32_HAS_OTG2 && !defined(STM32_OTG2_FIFO_MEM_SIZE)
+#error "STM32_OTG2_FIFO_MEM_SIZE not defined in registry"
+#endif
+
+#if (STM32_USB_USE_OTG1 && !defined(STM32_OTG1_HANDLER)) || \
+ (STM32_USB_USE_OTG2 && !defined(STM32_OTG2_HANDLER))
+#error "STM32_OTGx_HANDLER not defined in registry"
+#endif
+
+#if (STM32_USB_USE_OTG1 && !defined(STM32_OTG1_NUMBER)) || \
+ (STM32_USB_USE_OTG2 && !defined(STM32_OTG2_NUMBER))
+#error "STM32_OTGx_NUMBER not defined in registry"
+#endif
+
+/**
+ * @brief Maximum endpoint address.
+ */
+#if (STM32_HAS_OTG2 && STM32_USB_USE_OTG2) || defined(__DOXYGEN__)
+#if (STM32_OTG1_ENDPOINTS < STM32_OTG2_ENDPOINTS) || defined(__DOXYGEN__)
+#define USB_MAX_ENDPOINTS STM32_OTG2_ENDPOINTS
+#else
+#define USB_MAX_ENDPOINTS STM32_OTG1_ENDPOINTS
+#endif
+#else
+#define USB_MAX_ENDPOINTS STM32_OTG1_ENDPOINTS
+#endif
+
+#if STM32_USB_USE_OTG1 && !STM32_HAS_OTG1
+#error "OTG1 not present in the selected device"
+#endif
+
+#if STM32_USB_USE_OTG2 && !STM32_HAS_OTG2
+#error "OTG2 not present in the selected device"
+#endif
+
+#if !STM32_USB_USE_OTG1 && !STM32_USB_USE_OTG2
+#error "USB driver activated but no USB peripheral assigned"
+#endif
+
+#if STM32_USB_USE_OTG1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_USB_OTG1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to OTG1"
+#endif
+
+#if STM32_USB_USE_OTG2 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(STM32_USB_OTG2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to OTG2"
+#endif
+
+#if (STM32_USB_OTG1_RX_FIFO_SIZE & 3) != 0
+#error "OTG1 RX FIFO size must be a multiple of 4"
+#endif
+
+#if (STM32_USB_OTG2_RX_FIFO_SIZE & 3) != 0
+#error "OTG2 RX FIFO size must be a multiple of 4"
+#endif
+
+#if defined(STM32F2XX) || defined(STM32F4XX) || defined(STM32F7XX)
+#define STM32_USBCLK STM32_PLL48CLK
+#elif defined(STM32F10X_CL)
+#define STM32_USBCLK STM32_OTGFSCLK
+#elif defined(STM32L4XX)
+#define STM32_USBCLK STM32_48CLK
+#else
+#error "unsupported STM32 platform for OTG functionality"
+#endif
+
+#if STM32_USBCLK != 48000000
+#error "the USB OTG driver requires a 48MHz clock"
+#endif
+
+#if (USB_HOST_WAKEUP_DURATION < 2) || (USB_HOST_WAKEUP_DURATION > 15)
+#error "invalid USB_HOST_WAKEUP_DURATION setting, it must be between 2 and 15"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Peripheral-specific parameters block.
+ */
+typedef struct {
+ uint32_t rx_fifo_size;
+ uint32_t otg_ram_size;
+ uint32_t num_endpoints;
+} stm32_otg_params_t;
+
+/**
+ * @brief Type of an IN endpoint state structure.
+ */
+typedef struct {
+ /**
+ * @brief Requested transmit transfer size.
+ */
+ size_t txsize;
+ /**
+ * @brief Transmitted bytes so far.
+ */
+ size_t txcnt;
+ /**
+ * @brief Pointer to the transmission linear buffer.
+ */
+ const uint8_t *txbuf;
+#if (USB_USE_WAIT == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Total transmit transfer size.
+ */
+ size_t totsize;
+} USBInEndpointState;
+
+/**
+ * @brief Type of an OUT endpoint state structure.
+ */
+typedef struct {
+ /**
+ * @brief Requested receive transfer size.
+ */
+ size_t rxsize;
+ /**
+ * @brief Received bytes so far.
+ */
+ size_t rxcnt;
+ /**
+ * @brief Pointer to the receive linear buffer.
+ */
+ uint8_t *rxbuf;
+#if (USB_USE_WAIT == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Total receive transfer size.
+ */
+ size_t totsize;
+} USBOutEndpointState;
+
+/**
+ * @brief Type of an USB endpoint configuration structure.
+ * @note Platform specific restrictions may apply to endpoints.
+ */
+typedef struct {
+ /**
+ * @brief Type and mode of the endpoint.
+ */
+ uint32_t ep_mode;
+ /**
+ * @brief Setup packet notification callback.
+ * @details This callback is invoked when a setup packet has been
+ * received.
+ * @post The application must immediately call @p usbReadPacket() in
+ * order to access the received packet.
+ * @note This field is only valid for @p USB_EP_MODE_TYPE_CTRL
+ * endpoints, it should be set to @p NULL for other endpoint
+ * types.
+ */
+ usbepcallback_t setup_cb;
+ /**
+ * @brief IN endpoint notification callback.
+ * @details This field must be set to @p NULL if callback is not required.
+ */
+ usbepcallback_t in_cb;
+ /**
+ * @brief OUT endpoint notification callback.
+ * @details This field must be set to @p NULL if callback is not required.
+ */
+ usbepcallback_t out_cb;
+ /**
+ * @brief IN endpoint maximum packet size.
+ * @details This field must be set to zero if the IN endpoint is not used.
+ */
+ uint16_t in_maxsize;
+ /**
+ * @brief OUT endpoint maximum packet size.
+ * @details This field must be set to zero if the OUT endpoint is not used.
+ */
+ uint16_t out_maxsize;
+ /**
+ * @brief @p USBEndpointState associated to the IN endpoint.
+ * @details This field must be set to @p NULL if the IN endpoint is not
+ * used.
+ */
+ USBInEndpointState *in_state;
+ /**
+ * @brief @p USBEndpointState associated to the OUT endpoint.
+ * @details This field must be set to @p NULL if the OUT endpoint is not
+ * used.
+ */
+ USBOutEndpointState *out_state;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Determines the space allocated for the TXFIFO as multiples of
+ * the packet size (@p in_maxsize). Note that zero is interpreted
+ * as one for simplicity and robustness.
+ */
+ uint16_t in_multiplier;
+ /**
+ * @brief Pointer to a buffer for setup packets.
+ * @details Setup packets require a dedicated 8-bytes buffer, set this
+ * field to @p NULL for non-control endpoints.
+ */
+ uint8_t *setup_buf;
+} USBEndpointConfig;
+
+/**
+ * @brief Type of an USB driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief USB events callback.
+ * @details This callback is invoked when an USB driver event is registered.
+ */
+ usbeventcb_t event_cb;
+ /**
+ * @brief Device GET_DESCRIPTOR request callback.
+ * @note This callback is mandatory and cannot be set to @p NULL.
+ */
+ usbgetdescriptor_t get_descriptor_cb;
+ /**
+ * @brief Requests hook callback.
+ * @details This hook allows to be notified of standard requests or to
+ * handle non standard requests.
+ */
+ usbreqhandler_t requests_hook_cb;
+ /**
+ * @brief Start Of Frame callback.
+ */
+ usbcallback_t sof_cb;
+ /* End of the mandatory fields.*/
+} USBConfig;
+
+/**
+ * @brief Structure representing an USB driver.
+ */
+struct USBDriver {
+ /**
+ * @brief Driver state.
+ */
+ usbstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const USBConfig *config;
+ /**
+ * @brief Bit map of the transmitting IN endpoints.
+ */
+ uint16_t transmitting;
+ /**
+ * @brief Bit map of the receiving OUT endpoints.
+ */
+ uint16_t receiving;
+ /**
+ * @brief Active endpoints configurations.
+ */
+ const USBEndpointConfig *epc[USB_MAX_ENDPOINTS + 1];
+ /**
+ * @brief Fields available to user, it can be used to associate an
+ * application-defined handler to an IN endpoint.
+ * @note The base index is one, the endpoint zero does not have a
+ * reserved element in this array.
+ */
+ void *in_params[USB_MAX_ENDPOINTS];
+ /**
+ * @brief Fields available to user, it can be used to associate an
+ * application-defined handler to an OUT endpoint.
+ * @note The base index is one, the endpoint zero does not have a
+ * reserved element in this array.
+ */
+ void *out_params[USB_MAX_ENDPOINTS];
+ /**
+ * @brief Endpoint 0 state.
+ */
+ usbep0state_t ep0state;
+ /**
+ * @brief Next position in the buffer to be transferred through endpoint 0.
+ */
+ uint8_t *ep0next;
+ /**
+ * @brief Number of bytes yet to be transferred through endpoint 0.
+ */
+ size_t ep0n;
+ /**
+ * @brief Endpoint 0 end transaction callback.
+ */
+ usbcallback_t ep0endcb;
+ /**
+ * @brief Setup packet buffer.
+ */
+ uint8_t setup[8];
+ /**
+ * @brief Current USB device status.
+ */
+ uint16_t status;
+ /**
+ * @brief Assigned USB address.
+ */
+ uint8_t address;
+ /**
+ * @brief Current USB device configuration.
+ */
+ uint8_t configuration;
+ /**
+ * @brief State of the driver when a suspend happened.
+ */
+ usbstate_t saved_state;
+#if defined(USB_DRIVER_EXT_FIELDS)
+ USB_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the OTG peripheral associated to this driver.
+ */
+ stm32_otg_t *otg;
+ /**
+ * @brief Peripheral-specific parameters.
+ */
+ const stm32_otg_params_t *otgparams;
+ /**
+ * @brief Pointer to the next address in the packet memory.
+ */
+ uint32_t pmnext;
+ /**
+ * @brief Mask of TXFIFOs to be filled by the pump thread.
+ */
+ uint32_t txpending;
+ /**
+ * @brief Pointer to the thread when it is sleeping or @p NULL.
+ */
+ thread_reference_t wait;
+#if defined(_CHIBIOS_RT_)
+ /**
+ * @brief Pointer to the thread.
+ */
+ thread_reference_t tr;
+ /**
+ * @brief Working area for the dedicated data pump thread;
+ */
+ THD_WORKING_AREA(wa_pump, STM32_USB_OTG_THREAD_STACK_SIZE);
+#endif
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Returns the exact size of a receive transaction.
+ * @details The received size can be different from the size specified in
+ * @p usbStartReceiveI() because the last packet could have a size
+ * different from the expected one.
+ * @pre The OUT endpoint must have been configured in transaction mode
+ * in order to use this function.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return Received data size.
+ *
+ * @notapi
+ */
+#define usb_lld_get_transaction_size(usbp, ep) \
+ ((usbp)->epc[ep]->out_state->rxcnt)
+
+/**
+ * @brief Connects the USB device.
+ *
+ * @notapi
+ */
+#if (STM32_OTG_STEPPING == 1) || defined(__DOXYGEN__)
+#define usb_lld_connect_bus(usbp) ((usbp)->otg->GCCFG |= GCCFG_VBUSBSEN)
+#else
+#define usb_lld_connect_bus(usbp) ((usbp)->otg->DCTL &= ~DCTL_SDIS)
+#endif
+
+/**
+ * @brief Disconnect the USB device.
+ *
+ * @notapi
+ */
+#if (STM32_OTG_STEPPING == 1) || defined(__DOXYGEN__)
+#define usb_lld_disconnect_bus(usbp) ((usbp)->otg->GCCFG &= ~GCCFG_VBUSBSEN)
+#else
+#define usb_lld_disconnect_bus(usbp) ((usbp)->otg->DCTL |= DCTL_SDIS)
+#endif
+
+/**
+ * @brief Start of host wake-up procedure.
+ *
+ * @notapi
+ */
+#define usb_lld_wakeup_host(usbp) \
+ do{ \
+ (usbp)->otg->DCTL |= DCTL_RWUSIG; \
+ osalThreadSleepMilliseconds(USB_HOST_WAKEUP_DURATION); \
+ (usbp)->otg->DCTL &= ~DCTL_RWUSIG; \
+ } while (false)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_USB_USE_OTG1 && !defined(__DOXYGEN__)
+extern USBDriver USBD1;
+#endif
+
+#if STM32_USB_USE_OTG2 && !defined(__DOXYGEN__)
+extern USBDriver USBD2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void usb_lld_init(void);
+ void usb_lld_start(USBDriver *usbp);
+ void usb_lld_stop(USBDriver *usbp);
+ void usb_lld_reset(USBDriver *usbp);
+ void usb_lld_set_address(USBDriver *usbp);
+ void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep);
+ void usb_lld_disable_endpoints(USBDriver *usbp);
+ usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep);
+ usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf);
+ void usb_lld_start_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_start_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_stall_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_stall_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_clear_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_clear_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_pump(void *p);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_USB */
+
+#endif /* HAL_USB_LLD_H */
+
+/** @} */
|