PAL-board changes, phase 1.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11097 35acf78f-673a-0410-8e92-d51de3d6d3f4

2 files changed, 11 insertions, 186 deletions

diff --git a/os/hal/ports/STM32/LLD/GPIOv2/hal_pal_lld.c b/os/hal/ports/STM32/LLD/GPIOv2/hal_pal_lld.c
index 2d9bca949..a1f7af755 100644
--- a/os/hal/ports/STM32/LLD/GPIOv2/hal_pal_lld.c
+++ b/os/hal/ports/STM32/LLD/GPIOv2/hal_pal_lld.c
@@ -63,17 +63,6 @@ palevent_t _pal_events[16];
 /* Driver local functions.                                                   */

 /*===========================================================================*/

 

-static void initgpio(stm32_gpio_t *gpiop, const stm32_gpio_setup_t *config) {

-

-  gpiop->OTYPER  = config->otyper;

-  gpiop->OSPEEDR = config->ospeedr;

-  gpiop->PUPDR   = config->pupdr;

-  gpiop->ODR     = config->odr;

-  gpiop->AFRL    = config->afrl;

-  gpiop->AFRH    = config->afrh;

-  gpiop->MODER   = config->moder;

-}

-

 /*===========================================================================*/

 /* Driver interrupt handlers.                                                */

 /*===========================================================================*/

@@ -83,14 +72,11 @@ static void initgpio(stm32_gpio_t *gpiop, const stm32_gpio_setup_t *config) {
 /*===========================================================================*/

 

 /**

- * @brief   STM32 I/O ports configuration.

- * @details Ports A-D(E, F, G, H) clocks enabled.

- *

- * @param[in] config    the STM32 ports configuration

+ * @brief   PAL driver initialization.

  *

  * @notapi

  */

-void _pal_lld_init(const PALConfig *config) {

+void _pal_lld_init(void) {

 

 #if PAL_USE_CALLBACKS || PAL_USE_WAIT || defined(__DOXYGEN__)

   unsigned i;

@@ -100,6 +86,7 @@ void _pal_lld_init(const PALConfig *config) {
   }

 #endif

 

+#if 0

   /*

    * Enables the GPIO related clocks.

    */

@@ -117,42 +104,6 @@ void _pal_lld_init(const PALConfig *config) {
   RCC->AHB1ENR   |= AHB1_EN_MASK;

   RCC->AHB1LPENR |= AHB1_LPEN_MASK;

 #endif

-

-  /*

-   * Initial GPIO setup.

-   */

-#if STM32_HAS_GPIOA

-  initgpio(GPIOA, &config->PAData);

-#endif

-#if STM32_HAS_GPIOB

-  initgpio(GPIOB, &config->PBData);

-#endif

-#if STM32_HAS_GPIOC

-  initgpio(GPIOC, &config->PCData);

-#endif

-#if STM32_HAS_GPIOD

-  initgpio(GPIOD, &config->PDData);

-#endif

-#if STM32_HAS_GPIOE

-  initgpio(GPIOE, &config->PEData);

-#endif

-#if STM32_HAS_GPIOF

-  initgpio(GPIOF, &config->PFData);

-#endif

-#if STM32_HAS_GPIOG

-  initgpio(GPIOG, &config->PGData);

-#endif

-#if STM32_HAS_GPIOH

-  initgpio(GPIOH, &config->PHData);

-#endif

-#if STM32_HAS_GPIOI

-  initgpio(GPIOI, &config->PIData);

-#endif

-#if STM32_HAS_GPIOJ

-  initgpio(GPIOJ, &config->PJData);

-#endif

-#if STM32_HAS_GPIOK

-  initgpio(GPIOK, &config->PKData);

 #endif

 }

 

diff --git a/os/hal/ports/STM32/LLD/GPIOv2/hal_pal_lld.h b/os/hal/ports/STM32/LLD/GPIOv2/hal_pal_lld.h
index 546c45045..88e9984ad 100644
--- a/os/hal/ports/STM32/LLD/GPIOv2/hal_pal_lld.h
+++ b/os/hal/ports/STM32/LLD/GPIOv2/hal_pal_lld.h
@@ -25,12 +25,18 @@
 #ifndef HAL_PAL_LLD_H

 #define HAL_PAL_LLD_H

 

+#include "stm32_gpio.h"

+

 #if HAL_USE_PAL || defined(__DOXYGEN__)

 

 /*===========================================================================*/

 /* Unsupported modes and specific modes                                      */

 /*===========================================================================*/

 

+/* Specifies palInit() without parameter, required until all platforms will

+   be updated to the new style.*/

+#define PAL_NEW_INIT

+

 #undef PAL_MODE_RESET

 #undef PAL_MODE_UNCONNECTED

 #undef PAL_MODE_INPUT

@@ -130,39 +136,6 @@
                                          PAL_STM32_OTYPE_OPENDRAIN)

 /** @} */

 

-/* Discarded definitions from the ST headers, the PAL driver uses its own

-   definitions in order to have an unified handling for all devices.

-   Unfortunately the ST headers have no uniform definitions for the same

-   objects across the various sub-families.*/

-#undef GPIOA

-#undef GPIOB

-#undef GPIOC

-#undef GPIOD

-#undef GPIOE

-#undef GPIOF

-#undef GPIOG

-#undef GPIOH

-#undef GPIOI

-#undef GPIOJ

-#undef GPIOK

-

-/**

- * @name    GPIO ports definitions

- * @{

- */

-#define GPIOA                           ((stm32_gpio_t *)GPIOA_BASE)

-#define GPIOB                           ((stm32_gpio_t *)GPIOB_BASE)

-#define GPIOC                           ((stm32_gpio_t *)GPIOC_BASE)

-#define GPIOD                           ((stm32_gpio_t *)GPIOD_BASE)

-#define GPIOE                           ((stm32_gpio_t *)GPIOE_BASE)

-#define GPIOF                           ((stm32_gpio_t *)GPIOF_BASE)

-#define GPIOG                           ((stm32_gpio_t *)GPIOG_BASE)

-#define GPIOH                           ((stm32_gpio_t *)GPIOH_BASE)

-#define GPIOI                           ((stm32_gpio_t *)GPIOI_BASE)

-#define GPIOJ                           ((stm32_gpio_t *)GPIOJ_BASE)

-#define GPIOK                           ((stm32_gpio_t *)GPIOK_BASE)

-/** @} */

-

 /*===========================================================================*/

 /* I/O Ports Types and constants.                                            */

 /*===========================================================================*/

@@ -216,104 +189,6 @@
 /** @} */

 

 /**

- * @brief   STM32 GPIO registers block.

- */

-typedef struct {

-

-  volatile uint32_t     MODER;

-  volatile uint32_t     OTYPER;

-  volatile uint32_t     OSPEEDR;

-  volatile uint32_t     PUPDR;

-  volatile uint32_t     IDR;

-  volatile uint32_t     ODR;

-  volatile union {

-    uint32_t            W;

-    struct {

-      uint16_t          set;

-      uint16_t          clear;

-    } H;

-  } BSRR;

-  volatile uint32_t     LOCKR;

-  volatile uint32_t     AFRL;

-  volatile uint32_t     AFRH;

-  volatile uint32_t     BRR;

-} stm32_gpio_t;

-

-/**

- * @brief   GPIO port setup info.

- */

-typedef struct {

-  /** Initial value for MODER register.*/

-  uint32_t              moder;

-  /** Initial value for OTYPER register.*/

-  uint32_t              otyper;

-  /** Initial value for OSPEEDR register.*/

-  uint32_t              ospeedr;

-  /** Initial value for PUPDR register.*/

-  uint32_t              pupdr;

-  /** Initial value for ODR register.*/

-  uint32_t              odr;

-  /** Initial value for AFRL register.*/

-  uint32_t              afrl;

-  /** Initial value for AFRH register.*/

-  uint32_t              afrh;

-} stm32_gpio_setup_t;

-

-/**

- * @brief   STM32 GPIO static initializer.

- * @details An instance of this structure must be passed to @p palInit() at

- *          system startup time in order to initialize the digital I/O

- *          subsystem. This represents only the initial setup, specific pads

- *          or whole ports can be reprogrammed at later time.

- */

-typedef struct {

-#if STM32_HAS_GPIOA || defined(__DOXYGEN__)

-  /** @brief Port A setup data.*/

-  stm32_gpio_setup_t    PAData;

-#endif

-#if STM32_HAS_GPIOB || defined(__DOXYGEN__)

-  /** @brief Port B setup data.*/

-  stm32_gpio_setup_t    PBData;

-#endif

-#if STM32_HAS_GPIOC || defined(__DOXYGEN__)

-  /** @brief Port C setup data.*/

-  stm32_gpio_setup_t    PCData;

-#endif

-#if STM32_HAS_GPIOD || defined(__DOXYGEN__)

-  /** @brief Port D setup data.*/

-  stm32_gpio_setup_t    PDData;

-#endif

-#if STM32_HAS_GPIOE || defined(__DOXYGEN__)

-  /** @brief Port E setup data.*/

-  stm32_gpio_setup_t    PEData;

-#endif

-#if STM32_HAS_GPIOF || defined(__DOXYGEN__)

-  /** @brief Port F setup data.*/

-  stm32_gpio_setup_t    PFData;

-#endif

-#if STM32_HAS_GPIOG || defined(__DOXYGEN__)

-  /** @brief Port G setup data.*/

-  stm32_gpio_setup_t    PGData;

-#endif

-#if STM32_HAS_GPIOH || defined(__DOXYGEN__)

-  /** @brief Port H setup data.*/

-  stm32_gpio_setup_t    PHData;

-#endif

-#if STM32_HAS_GPIOI || defined(__DOXYGEN__)

-  /** @brief Port I setup data.*/

-  stm32_gpio_setup_t    PIData;

-#endif

-#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)

-  /** @brief Port I setup data.*/

-  stm32_gpio_setup_t    PJData;

-#endif

-#if STM32_HAS_GPIOK || defined(__DOXYGEN__)

-  /** @brief Port I setup data.*/

-  stm32_gpio_setup_t    PKData;

-#endif

-} PALConfig;

-

-/**

  * @brief   Type of digital I/O port sized unsigned integer.

  */

 typedef uint32_t ioportmask_t;

@@ -439,7 +314,7 @@ typedef uint32_t iopadid_t;
  *

  * @notapi

  */

-#define pal_lld_init(config) _pal_lld_init(config)

+#define pal_lld_init() _pal_lld_init()

 

 /**

  * @brief   Reads an I/O port.

@@ -596,14 +471,13 @@ typedef uint32_t iopadid_t;
   &_pal_events[PAL_PAD(line)]

 

 #if !defined(__DOXYGEN__)

-extern const PALConfig pal_default_config;

 extern palevent_t _pal_events[16];

 #endif

 

 #ifdef __cplusplus

 extern "C" {

 #endif

-  void _pal_lld_init(const PALConfig *config);

+  void _pal_lld_init(void);

   void _pal_lld_setgroupmode(ioportid_t port,

                              ioportmask_t mask,

                              iomode_t mode);