git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@2386 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 27 insertions, 27 deletions

diff --git a/os/hal/platforms/STM8S/serial_lld.c b/os/hal/platforms/STM8S/serial_lld.c
index 06f2f482b..d7ccfc70a 100644
--- a/os/hal/platforms/STM8S/serial_lld.c
+++ b/os/hal/platforms/STM8S/serial_lld.c
@@ -18,8 +18,8 @@
 */

 

 /**

- * @file    STM8/serial_lld.c

- * @brief   STM8 low level serial driver code.

+ * @file    STM8S/serial_lld.c

+ * @brief   STM8S low level serial driver code.

  *

  * @addtogroup SERIAL

  * @{

@@ -37,21 +37,21 @@
 /**

  * @brief   UART1 serial driver identifier.

  */

-#if STM8_SERIAL_USE_UART1 || defined(__DOXYGEN__)

+#if STM8S_SERIAL_USE_UART1 || defined(__DOXYGEN__)

 SerialDriver SD1;

 #endif

 

 /**

  * @brief   UART2 serial driver identifier.

  */

-#if STM8_SERIAL_USE_UART2 || defined(__DOXYGEN__)

+#if STM8S_SERIAL_USE_UART2 || defined(__DOXYGEN__)

 SerialDriver SD2;

 #endif

 

 /**

  * @brief   UART3 serial driver identifier.

  */

-#if STM8_SERIAL_USE_UART3 || defined(__DOXYGEN__)

+#if STM8S_SERIAL_USE_UART3 || defined(__DOXYGEN__)

 SerialDriver SD3;

 #endif

 

@@ -63,7 +63,7 @@ SerialDriver SD3;
  * @brief   Driver default configuration.

  */

 static ROMCONST SerialConfig default_config = {

-  BBR(SERIAL_DEFAULT_BITRATE),

+  BRR(SERIAL_DEFAULT_BITRATE),

   SD_MODE_PARITY_NONE | SD_MODE_STOP_1

 };

 

@@ -89,7 +89,7 @@ static void set_error(SerialDriver *sdp, uint8_t sr) {
   chSysUnlockFromIsr();

 }

 

-#if STM8_SERIAL_USE_UART1 || defined(__DOXYGEN__)

+#if STM8S_SERIAL_USE_UART1 || defined(__DOXYGEN__)

 static void notify1(void) {

 

   UART1->CR2 |= UART1_CR2_TIEN;

@@ -128,9 +128,9 @@ static void uart1_deinit(void) {
   UART1->CR5  = 0;

   UART1->PSCR = 0;

 }

-#endif /* STM8_SERIAL_USE_UART1 */

+#endif /* STM8S_SERIAL_USE_UART1 */

 

-#if STM8_SERIAL_USE_UART2 || defined(__DOXYGEN__)

+#if STM8S_SERIAL_USE_UART2 || defined(__DOXYGEN__)

 static void notify2(void) {

 

   UART2->CR2 |= UART2_CR2_TIEN;

@@ -171,9 +171,9 @@ static void uart2_deinit(void) {
   UART2->CR6  = 0;

   UART2->PSCR = 0;

 }

-#endif /* STM8_SERIAL_USE_UART1 */

+#endif /* STM8S_SERIAL_USE_UART1 */

 

-#if STM8_SERIAL_USE_UART3 || defined(__DOXYGEN__)

+#if STM8S_SERIAL_USE_UART3 || defined(__DOXYGEN__)

 static void notify3(void) {

 

   UART3->CR2 |= UART3_CR2_TIEN;

@@ -210,13 +210,13 @@ static void uart3_deinit(void) {
   UART3->CR4  = 0;

   UART3->CR6  = 0;

 }

-#endif /* STM8_SERIAL_USE_UART3 */

+#endif /* STM8S_SERIAL_USE_UART3 */

 

 /*===========================================================================*/

 /* Driver interrupt handlers.                                                */

 /*===========================================================================*/

 

-#if STM8_SERIAL_USE_UART1 || defined(__DOXYGEN__)

+#if STM8S_SERIAL_USE_UART1 || defined(__DOXYGEN__)

 /**

  * @brief   IRQ 17 service routine.

  *

@@ -257,9 +257,9 @@ CH_IRQ_HANDLER(18) {
 

   CH_IRQ_EPILOGUE();

 }

-#endif /* STM8_SERIAL_USE_UART1 */

+#endif /* STM8S_SERIAL_USE_UART1 */

 

-#if STM8_SERIAL_USE_UART2 || defined(__DOXYGEN__)

+#if STM8S_SERIAL_USE_UART2 || defined(__DOXYGEN__)

 /**

  * @brief   IRQ 20 service routine.

  *

@@ -300,9 +300,9 @@ CH_IRQ_HANDLER(21) {
 

   CH_IRQ_EPILOGUE();

 }

-#endif /* STM8_SERIAL_USE_UART2 */

+#endif /* STM8S_SERIAL_USE_UART2 */

 

-#if STM8_SERIAL_USE_UART3 || defined(__DOXYGEN__)

+#if STM8S_SERIAL_USE_UART3 || defined(__DOXYGEN__)

 /**

  * @brief   IRQ 20 service routine.

  *

@@ -343,7 +343,7 @@ CH_IRQ_HANDLER(21) {
 

   CH_IRQ_EPILOGUE();

 }

-#endif /* STM8_SERIAL_USE_UART3 */

+#endif /* STM8S_SERIAL_USE_UART3 */

 

 /*===========================================================================*/

 /* Driver exported functions.                                                */

@@ -356,19 +356,19 @@ CH_IRQ_HANDLER(21) {
  */

 void sd_lld_init(void) {

 

-#if STM8_SERIAL_USE_UART1

+#if STM8S_SERIAL_USE_UART1

   sdObjectInit(&SD1, NULL, notify1);

   CLK->PCKENR1 |= CLK_PCKENR1_UART1;        /* PCKEN12, clock source.       */

   UART1->CR1 = UART1_CR1_UARTD;             /* UARTD (low power).           */

 #endif

 

-#if STM8_SERIAL_USE_UART2

+#if STM8S_SERIAL_USE_UART2

   sdObjectInit(&SD2, NULL, notify2);

   CLK->PCKENR1 |= CLK_PCKENR1_UART2;        /* PCKEN13, clock source.       */

   UART2->CR1 = UART2_CR1_UARTD;             /* UARTD (low power).           */

 #endif

 

-#if STM8_SERIAL_USE_UART3

+#if STM8S_SERIAL_USE_UART3

   sdObjectInit(&SD3, NULL, notify3);

   CLK->PCKENR1 |= CLK_PCKENR1_UART3;        /* PCKEN13, clock source.       */

   UART3->CR1 = UART3_CR1_UARTD;             /* UARTD (low power).           */

@@ -390,19 +390,19 @@ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
   if (config == NULL)

     config = &default_config;

 

-#if STM8_SERIAL_USE_UART1

+#if STM8S_SERIAL_USE_UART1

   if (&SD1 == sdp) {

     uart1_init(config);

     return;

   }

 #endif

-#if STM8_SERIAL_USE_UART2

+#if STM8S_SERIAL_USE_UART2

   if (&SD2 == sdp) {

     uart2_init(config);

     return;

   }

 #endif

-#if STM8_SERIAL_USE_UART3

+#if STM8S_SERIAL_USE_UART3

   if (&SD3 == sdp) {

     uart3_init(config);

     return;

@@ -421,19 +421,19 @@ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
  */

 void sd_lld_stop(SerialDriver *sdp) {

 

-#if STM8_SERIAL_USE_UART1

+#if STM8S_SERIAL_USE_UART1

   if (&SD1 == sdp) {

     uart1_deinit();

     return;

   }

 #endif

-#if STM8_SERIAL_USE_UART2

+#if STM8S_SERIAL_USE_UART2

   if (&SD2 == sdp) {

     uart2_deinit();

     return;

   }

 #endif

-#if STM8_SERIAL_USE_UART3

+#if STM8S_SERIAL_USE_UART3

   if (&SD3 == sdp) {

     uart3_deinit();

     return;