git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@2381 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 0 insertions, 173 deletions

diff --git a/os/hal/platforms/STM8/serial_lld.h b/os/hal/platforms/STM8/serial_lld.h
deleted file mode 100644
index 62329225a..000000000
--- a/os/hal/platforms/STM8/serial_lld.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.

-

-    This file is part of ChibiOS/RT.

-

-    ChibiOS/RT is free software; you can redistribute it and/or modify

-    it under the terms of the GNU General Public License as published by

-    the Free Software Foundation; either version 3 of the License, or

-    (at your option) any later version.

-

-    ChibiOS/RT is distributed in the hope that it will be useful,

-    but WITHOUT ANY WARRANTY; without even the implied warranty of

-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

-    GNU General Public License for more details.

-

-    You should have received a copy of the GNU General Public License

-    along with this program.  If not, see <http://www.gnu.org/licenses/>.

-*/

-

-/**

- * @file    STM8S/serial_lld.h

- * @brief   STM8S low level serial driver header.

- *

- * @addtogroup SERIAL

- * @{

- */

-

-#ifndef _SERIAL_LLD_H_

-#define _SERIAL_LLD_H_

-

-#if HAL_USE_SERIAL || defined(__DOXYGEN__)

-

-/*===========================================================================*/

-/* Driver constants.                                                         */

-/*===========================================================================*/

-

-#define SD_MODE_PARITY          0x07        /**< @brief Parity field mask.  */

-#define SD_MODE_PARITY_NONE     0x00        /**< @brief No parity.          */

-#define SD_MODE_PARITY_EVEN     0x05        /**< @brief Even parity.        */

-#define SD_MODE_PARITY_ODD      0x07        /**< @brief Odd parity.         */

-

-#define SD_MODE_STOP            0x30        /**< @brief Stop bits mask.     */

-#define SD_MODE_STOP_1          0x00        /**< @brief One stop bit.       */

-#define SD_MODE_STOP_2          0x20        /**< @brief Two stop bits.      */

-#define SD_MODE_STOP_1P5        0x30        /**< @brief 1.5 stop bits.      */

-

-/*===========================================================================*/

-/* Driver pre-compile time settings.                                         */

-/*===========================================================================*/

-

-/**

- * @brief   UART1 driver enable switch.

- * @details If set to @p TRUE the support for UART1 is included.

- * @note    The default is @p TRUE.

- */

-#if !defined(STM8S_SERIAL_USE_UART1) || defined(__DOXYGEN__)

-#define STM8S_SERIAL_USE_UART1          TRUE

-#endif

-

-/**

- * @brief   UART2 driver enable switch.

- * @details If set to @p TRUE the support for UART3 is included.

- * @note    The default is @p TRUE.

- */

-#if !defined(STM8S_SERIAL_USE_UART2) || defined(__DOXYGEN__)

-#define STM8S_SERIAL_USE_UART2          TRUE

-#endif

-

-/**

- * @brief   UART3 driver enable switch.

- * @details If set to @p TRUE the support for UART3 is included.

- * @note    The default is @p TRUE.

- */

-#if !defined(STM8S_SERIAL_USE_UART3) || defined(__DOXYGEN__)

-#define STM8S_SERIAL_USE_UART3          TRUE

-#endif

-

-/*===========================================================================*/

-/* Derived constants and error checks.                                       */

-/*===========================================================================*/

-

-#if STM8S_SERIAL_USE_UART2 && STM8S_SERIAL_USE_UART3

-#error "STM8S UART2 and UART3 cannot be used together"

-#endif

-

-/*===========================================================================*/

-/* Driver data structures and types.                                         */

-/*===========================================================================*/

-

-/**

- * @brief   Serial Driver condition flags type.

- */

-typedef uint8_t sdflags_t;

-

-/**

- * @brief   Generic Serial Driver configuration structure.

- * @details An instance of this structure must be passed to @p sdStart()

- *          in order to configure and start a serial driver operations.

- * @note    This structure content is architecture dependent, each driver

- *          implementation defines its own version and the custom static

- *          initializers.

- */

-typedef struct {

-  /**

-   * @brief Bit rate register.

-   */

-  uint16_t                  sc_brr;

-  /**

-   * @brief Mode flags.

-   */

-  uint8_t                   sc_mode;

-} SerialConfig;

-

-/**

- * @brief   @p SerialDriver specific data.

- */

-#define _serial_driver_data                                                 \

-  _base_asynchronous_channel_data                                           \

-  /* Driver state.*/                                                        \

-  sdstate_t                 state;                                          \

-  /* Input queue.*/                                                         \

-  InputQueue                iqueue;                                         \

-  /* Output queue.*/                                                        \

-  OutputQueue               oqueue;                                         \

-  /* Status Change @p EventSource.*/                                        \

-  EventSource               sevent;                                         \

-  /* I/O driver status flags.*/                                             \

-  sdflags_t                 flags;                                          \

-  /* Input circular buffer.*/                                               \

-  uint8_t                   ib[SERIAL_BUFFERS_SIZE];                        \

-  /* Output circular buffer.*/                                              \

-  uint8_t                   ob[SERIAL_BUFFERS_SIZE];                        \

-  /* End of the mandatory fields.*/

-

-/*===========================================================================*/

-/* Driver macros.                                                            */

-/*===========================================================================*/

-

-/**

- * @brief   Macro for baud rate computation.

- * @note    Make sure the final baud rate is within tolerance.

- */

-#define BBR(b) (SYSCLK / (b))

-

-/*===========================================================================*/

-/* External declarations.                                                    */

-/*===========================================================================*/

-

-#if STM8S_SERIAL_USE_UART1 && !defined(__DOXYGEN__)

-extern SerialDriver SD1;

-#endif

-#if STM8S_SERIAL_USE_UART2 && !defined(__DOXYGEN__)

-extern SerialDriver SD2;

-#endif

-#if STM8S_SERIAL_USE_UART3 && !defined(__DOXYGEN__)

-extern SerialDriver SD3;

-#endif

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void sd_lld_init(void);

-  void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);

-  void sd_lld_stop(SerialDriver *sdp);

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* HAL_USE_SERIAL */

-

-#endif /* _SERIAL_LLD_H_ */

-

-/** @} */