diff options
| author | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2011-07-27 12:22:07 +0000 |
|---|---|---|
| committer | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2011-07-27 12:22:07 +0000 |
| commit | de3354237212038456fadffcc252b4365815634a (patch) | |
| tree | 1b448798653fdc0834b5ad66fcf5d9c9267959fc /os/hal/platforms/STM32F2xx/hal_lld.c | |
| parent | 505ca5b1178585643b402fb52d1e076f20737002 (diff) | |
| download | ChibiOS-de3354237212038456fadffcc252b4365815634a.tar.gz ChibiOS-de3354237212038456fadffcc252b4365815634a.tar.bz2 ChibiOS-de3354237212038456fadffcc252b4365815634a.zip | |
Provisional STM32L1xx and STM32F2xx support.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3180 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/platforms/STM32F2xx/hal_lld.c')
| -rw-r--r-- | os/hal/platforms/STM32F2xx/hal_lld.c | 164 |
1 files changed, 164 insertions, 0 deletions
diff --git a/os/hal/platforms/STM32F2xx/hal_lld.c b/os/hal/platforms/STM32F2xx/hal_lld.c new file mode 100644 index 000000000..3f7bf538b --- /dev/null +++ b/os/hal/platforms/STM32F2xx/hal_lld.c @@ -0,0 +1,164 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
+ 2011 Giovanni Di Sirio.
+
+ This file is part of ChibiOS/RT.
+
+ ChibiOS/RT is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ ChibiOS/RT is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file STM32F2xx/hal_lld.c
+ * @brief STM32F2xx HAL subsystem low level driver source.
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#define AIRCR_VECTKEY 0x05FA0000
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level HAL driver initialization.
+ *
+ * @notapi
+ */
+void hal_lld_init(void) {
+
+ /* Reset of all peripherals.*/
+// RCC->APB1RSTR = 0xFFFFFFFF;
+// RCC->APB2RSTR = 0xFFFFFFFF;
+// RCC->APB1RSTR = 0;
+// RCC->APB2RSTR = 0;
+
+ /* SysTick initialization using the system clock.*/
+ SysTick->LOAD = STM32_HCLK / CH_FREQUENCY - 1;
+ SysTick->VAL = 0;
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_ENABLE_Msk |
+ SysTick_CTRL_TICKINT_Msk;
+
+
+
+#if defined(STM32_DMA_REQUIRED)
+ dmaInit();
+#endif
+}
+
+/**
+ * @brief STM32F2xx clocks and PLL initialization.
+ * @note All the involved constants come from the file @p board.h.
+ * @note This function should be invoked just after the system reset.
+ *
+ * @special
+ */
+#if defined(STM32F2XX) || defined(__DOXYGEN__)
+/**
+ * @brief Clocks and internal voltage initialization.
+ */
+void stm32_clock_init(void) {
+
+#if !STM32_NO_INIT
+ /* PWR clock enable.*/
+ RCC->APB1ENR = RCC_APB1ENR_PWREN;
+
+ /* Initial clocks setup and wait for HSI stabilization, the MSI clock is
+ always enabled because it is the fallback clock when PLL the fails.*/
+ RCC->CR |= RCC_CR_HSION;
+ while ((RCC->CR & RCC_CR_HSIRDY) == 0)
+ ; /* Waits until HSI is stable. */
+
+#if STM32_HSE_ENABLED
+ /* HSE activation.*/
+ RCC->CR |= RCC_CR_HSEON;
+ while ((RCC->CR & RCC_CR_HSERDY) == 0)
+ ; /* Waits until HSE is stable. */
+#endif
+
+#if STM32_LSI_ENABLED
+ /* LSI activation.*/
+ RCC->CSR |= RCC_CSR_LSION;
+ while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
+ ; /* Waits until LSI is stable. */
+#endif
+
+#if STM32_LSE_ENABLED
+ /* LSE activation, have to unlock the register.*/
+ if ((RCC->BDCR & RCC_BDCR_LSEON) == 0) {
+ PWR->CR |= PWR_CR_DBP;
+ RCC->BDCR |= RCC_BDCR_LSEON;
+ PWR->CR &= ~PWR_CR_DBP;
+ }
+ while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
+ ; /* Waits until LSE is stable. */
+#endif
+
+#if STM32_ACTIVATE_PLL
+ /* PLL activation.*/
+ RCC->PLLCFGR = STM32_PLLQ | STM32_PLLSRC | STM32_PLLP | STM32_PLLN | STM32_PLLM;
+ RCC->CR |= RCC_CR_PLLON;
+ while (!(RCC->CR & RCC_CR_PLLRDY))
+ ; /* Waits until PLL is stable. */
+#endif
+
+#if STM32_ACTIVATE_PLLI2S
+ /* PLLI2S activation.*/
+ RCC->PLLI2SCFGR = STM32_PLI2SR_VALUE | STM32_PLLI2SN_VALUE;
+ RCC->CR |= RCC_CR_PLLI2SON;
+ while (!(RCC->CR & RCC_CR_PLLI2SRDY))
+ ; /* Waits until PLLI2S is stable. */
+#endif
+
+ /* Other clock-related settings (dividers, MCO etc).*/
+ RCC->CFGR |= STM32_MCO2PRE | STM32_MCO2SEL | STM32_MCO1PRE | STM32_MCO1SEL |
+ STM32_RTCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
+
+ /* Flash setup. */
+ FLASH->ACR = FLASH_ACR_PRFTEN | FLASH_ACR_ICEN | FLASH_ACR_DCEN | STM32_FLASHBITS;
+
+ /* Switching to the configured clock source if it is different from MSI. */
+#if (STM32_SW != STM32_SW_HSI)
+ RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
+ while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
+ ;
+#endif
+#endif /* STM32_NO_INIT */
+}
+#else
+void stm32_clock_init(void) {}
+#endif
+
+/** @} */
|