diff options
author | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2013-08-09 08:24:22 +0000 |
---|---|---|
committer | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2013-08-09 08:24:22 +0000 |
commit | 8ca210a4af9fd039e290cfcc309adde543999c1f (patch) | |
tree | 1aa594d5e65d5ebabdd358acbe8d3a9ac29f2070 /os/hal/platforms/STM32F0xx/adc_lld.c | |
parent | cb453a3a12464dd71856b1354d083b5b02260870 (diff) | |
download | ChibiOS-8ca210a4af9fd039e290cfcc309adde543999c1f.tar.gz ChibiOS-8ca210a4af9fd039e290cfcc309adde543999c1f.tar.bz2 ChibiOS-8ca210a4af9fd039e290cfcc309adde543999c1f.zip |
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6108 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/platforms/STM32F0xx/adc_lld.c')
-rw-r--r-- | os/hal/platforms/STM32F0xx/adc_lld.c | 298 |
1 files changed, 0 insertions, 298 deletions
diff --git a/os/hal/platforms/STM32F0xx/adc_lld.c b/os/hal/platforms/STM32F0xx/adc_lld.c deleted file mode 100644 index 5fa419679..000000000 --- a/os/hal/platforms/STM32F0xx/adc_lld.c +++ /dev/null @@ -1,298 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file STM32F0xx/adc_lld.c
- * @brief STM32F0xx ADC subsystem low level driver source.
- *
- * @addtogroup ADC
- * @{
- */
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_ADC || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/** @brief ADC1 driver identifier.*/
-#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
-ADCDriver ADCD1;
-#endif
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/**
- * @brief Stops an ongoing conversion, if any.
- *
- * @param[in] adc pointer to the ADC registers block
- */
-static void adc_lld_stop_adc(ADC_TypeDef *adc) {
-
- if (adc->CR & ADC_CR_ADSTART) {
- adc->CR |= ADC_CR_ADSTP;
- while (adc->CR & ADC_CR_ADSTP)
- ;
- }
-}
-
-/**
- * @brief ADC DMA ISR service routine.
- *
- * @param[in] adcp pointer to the @p ADCDriver object
- * @param[in] flags pre-shifted content of the ISR register
- */
-static void adc_lld_serve_rx_interrupt(ADCDriver *adcp, uint32_t flags) {
-
- /* DMA errors handling.*/
- if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
- /* DMA, this could help only if the DMA tries to access an unmapped
- address space or violates alignment rules.*/
- _adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
- }
- else {
- /* It is possible that the conversion group has already be reset by the
- ADC error handler, in this case this interrupt is spurious.*/
- if (adcp->grpp != NULL) {
- if ((flags & STM32_DMA_ISR_HTIF) != 0) {
- /* Half transfer processing.*/
- _adc_isr_half_code(adcp);
- }
- if ((flags & STM32_DMA_ISR_TCIF) != 0) {
- /* Transfer complete processing.*/
- _adc_isr_full_code(adcp);
- }
- }
- }
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
-/**
- * @brief ADC interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(Vector70) {
- uint32_t isr;
-
- CH_IRQ_PROLOGUE();
-
- isr = ADC1->ISR;
- ADC1->ISR = isr;
-
- /* It could be a spurious interrupt caused by overflows after DMA disabling,
- just ignore it in this case.*/
- if (ADCD1.grpp != NULL) {
- /* Note, an overflow may occur after the conversion ended before the driver
- is able to stop the ADC, this is why the DMA channel is checked too.*/
- if ((isr & ADC_ISR_OVR) &&
- (dmaStreamGetTransactionSize(ADCD1.dmastp) > 0)) {
- /* ADC overflow condition, this could happen only if the DMA is unable
- to read data fast enough.*/
- _adc_isr_error_code(&ADCD1, ADC_ERR_OVERFLOW);
- }
- if (isr & ADC_ISR_AWD) {
- /* Analog watchdog error.*/
- _adc_isr_error_code(&ADCD1, ADC_ERR_AWD);
- }
- }
-
- CH_IRQ_EPILOGUE();
-}
-#endif
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level ADC driver initialization.
- *
- * @notapi
- */
-void adc_lld_init(void) {
-
-#if STM32_ADC_USE_ADC1
- /* Driver initialization.*/
- adcObjectInit(&ADCD1);
- ADCD1.adc = ADC1;
- ADCD1.dmastp = STM32_DMA1_STREAM1;
- ADCD1.dmamode = STM32_DMA_CR_PL(STM32_ADC_ADC1_DMA_PRIORITY) |
- STM32_DMA_CR_DIR_P2M |
- STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD |
- STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
- STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
-#endif
-
- /* The shared vector is initialized on driver initialization and never
- disabled.*/
- nvicEnableVector(ADC1_COMP_IRQn,
- CORTEX_PRIORITY_MASK(STM32_ADC_IRQ_PRIORITY));
-
- /* Calibration procedure.*/
- rccEnableADC1(FALSE);
- chDbgAssert(ADC1->CR == 0, "adc_lld_init(), #1", "invalid register state");
- ADC1->CR |= ADC_CR_ADCAL;
- while (ADC1->CR & ADC_CR_ADCAL)
- ;
- rccDisableADC1(FALSE);
-}
-
-/**
- * @brief Configures and activates the ADC peripheral.
- *
- * @param[in] adcp pointer to the @p ADCDriver object
- *
- * @notapi
- */
-void adc_lld_start(ADCDriver *adcp) {
-
- /* If in stopped state then enables the ADC and DMA clocks.*/
- if (adcp->state == ADC_STOP) {
-#if STM32_ADC_USE_ADC1
- if (&ADCD1 == adcp) {
- bool_t b;
- b = dmaStreamAllocate(adcp->dmastp,
- STM32_ADC_ADC1_DMA_IRQ_PRIORITY,
- (stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
- (void *)adcp);
- chDbgAssert(!b, "adc_lld_start(), #1", "stream already allocated");
- dmaStreamSetPeripheral(adcp->dmastp, &ADC1->DR);
- rccEnableADC1(FALSE);
-#if STM32_ADCSW == STM32_ADCSW_HSI14
- /* Clock from HSI14, no need for jitter removal.*/
- ADC1->CFGR2 = 0x00001000;
-#else
-#if STM32_ADCPRE == STM32_ADCPRE_DIV2
- ADC1->CFGR2 = 0x00001000 | ADC_CFGR2_JITOFFDIV2;
-#else
- ADC1->CFGR2 = 0x00001000 | ADC_CFGR2_JITOFFDIV4;
-#endif
-#endif
- }
-#endif /* STM32_ADC_USE_ADC1 */
-
- /* ADC initial setup, starting the analog part here in order to reduce
- the latency when starting a conversion.*/
- adcp->adc->CR = ADC_CR_ADEN;
- while (!(adcp->adc->ISR & ADC_ISR_ADRDY))
- ;
- }
-}
-
-/**
- * @brief Deactivates the ADC peripheral.
- *
- * @param[in] adcp pointer to the @p ADCDriver object
- *
- * @notapi
- */
-void adc_lld_stop(ADCDriver *adcp) {
-
- /* If in ready state then disables the ADC clock and analog part.*/
- if (adcp->state == ADC_READY) {
-
- dmaStreamRelease(adcp->dmastp);
-
- /* Disabling ADC.*/
- if (adcp->adc->CR & ADC_CR_ADEN) {
- adc_lld_stop_adc(adcp->adc);
- adcp->adc->CR |= ADC_CR_ADDIS;
- while (adcp->adc->CR & ADC_CR_ADDIS)
- ;
- }
-
-#if STM32_ADC_USE_ADC1
- if (&ADCD1 == adcp)
- rccDisableADC1(FALSE);
-#endif
- }
-}
-
-/**
- * @brief Starts an ADC conversion.
- *
- * @param[in] adcp pointer to the @p ADCDriver object
- *
- * @notapi
- */
-void adc_lld_start_conversion(ADCDriver *adcp) {
- uint32_t mode;
- const ADCConversionGroup *grpp = adcp->grpp;
-
- /* DMA setup.*/
- mode = adcp->dmamode;
- if (grpp->circular) {
- mode |= STM32_DMA_CR_CIRC;
- }
- if (adcp->depth > 1) {
- /* If the buffer depth is greater than one then the half transfer interrupt
- interrupt is enabled in order to allows streaming processing.*/
- mode |= STM32_DMA_CR_HTIE;
- }
- dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
- dmaStreamSetTransactionSize(adcp->dmastp, (uint32_t)grpp->num_channels *
- (uint32_t)adcp->depth);
- dmaStreamSetMode(adcp->dmastp, mode);
- dmaStreamEnable(adcp->dmastp);
-
- /* ADC setup, if it is defined a callback for the analog watch dog then it
- is enabled.*/
- adcp->adc->ISR = adcp->adc->ISR;
- adcp->adc->IER = ADC_IER_OVRIE | ADC_IER_AWDIE;
- adcp->adc->TR = grpp->tr;
- adcp->adc->SMPR = grpp->smpr;
- adcp->adc->CHSELR = grpp->chselr;
-
- /* ADC configuration and start.*/
- adcp->adc->CFGR1 = grpp->cfgr1 | ADC_CFGR1_CONT | ADC_CFGR1_DMACFG |
- ADC_CFGR1_DMAEN;
- adcp->adc->CR |= ADC_CR_ADSTART;
-}
-
-/**
- * @brief Stops an ongoing conversion.
- *
- * @param[in] adcp pointer to the @p ADCDriver object
- *
- * @notapi
- */
-void adc_lld_stop_conversion(ADCDriver *adcp) {
-
- dmaStreamDisable(adcp->dmastp);
- adc_lld_stop_adc(adcp->adc);
-}
-
-#endif /* HAL_USE_ADC */
-
-/** @} */
|