git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6242 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 0 insertions, 220 deletions

diff --git a/os/hal/platforms/STM32/ext_lld.c b/os/hal/platforms/STM32/ext_lld.c
deleted file mode 100644
index 80b222124..000000000
--- a/os/hal/platforms/STM32/ext_lld.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    STM32/ext_lld.c

- * @brief   STM32 EXT subsystem low level driver source.

- *

- * @addtogroup EXT

- * @{

- */

-

-#include "hal.h"

-

-#if HAL_USE_EXT || defined(__DOXYGEN__)

-

-#include "ext_lld_isr.h"

-

-/*===========================================================================*/

-/* Driver local definitions.                                                 */

-/*===========================================================================*/

-

-/*===========================================================================*/

-/* Driver exported variables.                                                */

-/*===========================================================================*/

-

-/**

- * @brief   EXTD1 driver identifier.

- */

-EXTDriver EXTD1;

-

-/*===========================================================================*/

-/* Driver local variables and types.                                         */

-/*===========================================================================*/

-

-/*===========================================================================*/

-/* Driver local functions.                                                   */

-/*===========================================================================*/

-

-/*===========================================================================*/

-/* Driver interrupt handlers.                                                */

-/*===========================================================================*/

-

-/*===========================================================================*/

-/* Driver exported functions.                                                */

-/*===========================================================================*/

-

-/**

- * @brief   Low level EXT driver initialization.

- *

- * @notapi

- */

-void ext_lld_init(void) {

-

-  /* Driver initialization.*/

-  extObjectInit(&EXTD1);

-}

-

-/**

- * @brief   Configures and activates the EXT peripheral.

- *

- * @param[in] extp      pointer to the @p EXTDriver object

- *

- * @notapi

- */

-void ext_lld_start(EXTDriver *extp) {

-  unsigned i;

-

-  if (extp->state == EXT_STOP)

-    ext_lld_exti_irq_enable();

-

-  /* Configuration of automatic channels.*/

-  for (i = 0; i < EXT_MAX_CHANNELS; i++)

-    if (extp->config->channels[i].mode & EXT_CH_MODE_AUTOSTART)

-      ext_lld_channel_enable(extp, i);

-    else

-      ext_lld_channel_disable(extp, i);

-}

-

-/**

- * @brief   Deactivates the EXT peripheral.

- *

- * @param[in] extp      pointer to the @p EXTDriver object

- *

- * @notapi

- */

-void ext_lld_stop(EXTDriver *extp) {

-

-  if (extp->state == EXT_ACTIVE)

-    ext_lld_exti_irq_disable();

-

-  EXTI->EMR = 0;

-  EXTI->IMR = 0;

-  EXTI->PR  = 0xFFFFFFFF;

-#if STM32_EXTI_NUM_CHANNELS > 32

-  EXTI->PR2 = 0xFFFFFFFF;

-#endif

-}

-

-/**

- * @brief   Enables an EXT channel.

- *

- * @param[in] extp      pointer to the @p EXTDriver object

- * @param[in] channel   channel to be enabled

- *

- * @notapi

- */

-void ext_lld_channel_enable(EXTDriver *extp, expchannel_t channel) {

-

-#if STM32_EXTI_NUM_CHANNELS > 32

-  if (channel < 32) {

-#endif

-    /* Programming edge registers.*/

-    if (extp->config->channels[channel].mode & EXT_CH_MODE_RISING_EDGE)

-      EXTI->RTSR |= (1 << channel);

-    else

-      EXTI->RTSR &= ~(1 << channel);

-    if (extp->config->channels[channel].mode & EXT_CH_MODE_FALLING_EDGE)

-      EXTI->FTSR |= (1 << channel);

-    else

-      EXTI->FTSR &= ~(1 << channel);

-

-    /* Programming interrupt and event registers.*/

-    if (extp->config->channels[channel].cb != NULL) {

-      EXTI->IMR |= (1 << channel);

-      EXTI->EMR &= ~(1 << channel);

-    }

-    else {

-      EXTI->EMR |= (1 << channel);

-      EXTI->IMR &= ~(1 << channel);

-    }

-#if STM32_EXTI_NUM_CHANNELS > 32

-  }

-  else {

-    /* Programming edge registers.*/

-    if (extp->config->channels[channel].mode & EXT_CH_MODE_RISING_EDGE)

-      EXTI->RTSR2 |= (1 << (32 - channel));

-    else

-      EXTI->RTSR2 &= ~(1 << (32 - channel));

-    if (extp->config->channels[channel].mode & EXT_CH_MODE_FALLING_EDGE)

-      EXTI->FTSR2 |= (1 << (32 - channel));

-    else

-      EXTI->FTSR2 &= ~(1 << (32 - channel));

-

-    /* Programming interrupt and event registers.*/

-    if (extp->config->channels[channel].cb != NULL) {

-      EXTI->IMR2 |= (1 << (32 - channel));

-      EXTI->EMR2 &= ~(1 << (32 - channel));

-    }

-    else {

-      EXTI->EMR2 |= (1 << (32 - channel));

-      EXTI->IMR2 &= ~(1 << (32 - channel));

-    }

-  }

-#endif

-

-  /* Setting the associated GPIO for external channels.*/

-  if (channel < 16) {

-    uint32_t n = channel >> 2;

-    uint32_t mask = ~(0xF << ((channel & 3) * 4));

-    uint32_t port = ((extp->config->channels[channel].mode &

-                      EXT_MODE_GPIO_MASK) >>

-                     EXT_MODE_GPIO_OFF) << ((channel & 3) * 4);

-

-#if defined(STM32L1XX_MD) || defined(STM32F0XX) || defined(STM32F2XX) ||    \

-    defined(STM32F30X) || defined(STM32F37X) || defined(STM32F4XX)

-  SYSCFG->EXTICR[n] = (SYSCFG->EXTICR[n] & mask) | port;

-#else /* STM32F1XX */

-  AFIO->EXTICR[n] = (AFIO->EXTICR[n] & mask) | port;

-#endif /* STM32F1XX */

-  }

-}

-

-/**

- * @brief   Disables an EXT channel.

- *

- * @param[in] extp      pointer to the @p EXTDriver object

- * @param[in] channel   channel to be disabled

- *

- * @notapi

- */

-void ext_lld_channel_disable(EXTDriver *extp, expchannel_t channel) {

-

-  (void)extp;

-

-#if STM32_EXTI_NUM_CHANNELS > 32

-  if (channel < 32) {

-#endif

-    EXTI->IMR   &= ~(1 << channel);

-    EXTI->EMR   &= ~(1 << channel);

-    EXTI->RTSR  &= ~(1 << channel);

-    EXTI->FTSR  &= ~(1 << channel);

-    EXTI->PR     =  (1 << channel);

-#if STM32_EXTI_NUM_CHANNELS > 32

-  }

-  else {

-    EXTI->IMR2  &= ~(1 << (32 - channel));

-    EXTI->EMR2  &= ~(1 << (32 - channel));

-    EXTI->RTSR2 &= ~(1 << (32 - channel));

-    EXTI->FTSR2 &= ~(1 << (32 - channel));

-    EXTI->PR2    =  (1 << (32 - channel));

-  }

-#endif

-}

-

-#endif /* HAL_USE_EXT */

-

-/** @} */