git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6108 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 0 insertions, 303 deletions

diff --git a/os/hal/platforms/STM32/USARTv1/serial_lld.h b/os/hal/platforms/STM32/USARTv1/serial_lld.h
deleted file mode 100644
index 7242537d7..000000000
--- a/os/hal/platforms/STM32/USARTv1/serial_lld.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    STM32/USARTv1/serial_lld.h

- * @brief   STM32 low level serial driver header.

- *

- * @addtogroup SERIAL

- * @{

- */

-

-#ifndef _SERIAL_LLD_H_

-#define _SERIAL_LLD_H_

-

-#if HAL_USE_SERIAL || defined(__DOXYGEN__)

-

-/*===========================================================================*/

-/* Driver constants.                                                         */

-/*===========================================================================*/

-

-/*===========================================================================*/

-/* Driver pre-compile time settings.                                         */

-/*===========================================================================*/

-

-/**

- * @name    Configuration options

- * @{

- */

-/**

- * @brief   USART1 driver enable switch.

- * @details If set to @p TRUE the support for USART1 is included.

- * @note    The default is @p TRUE.

- */

-#if !defined(STM32_SERIAL_USE_USART1) || defined(__DOXYGEN__)

-#define STM32_SERIAL_USE_USART1             FALSE

-#endif

-

-/**

- * @brief   USART2 driver enable switch.

- * @details If set to @p TRUE the support for USART2 is included.

- * @note    The default is @p TRUE.

- */

-#if !defined(STM32_SERIAL_USE_USART2) || defined(__DOXYGEN__)

-#define STM32_SERIAL_USE_USART2             FALSE

-#endif

-

-/**

- * @brief   USART3 driver enable switch.

- * @details If set to @p TRUE the support for USART3 is included.

- * @note    The default is @p TRUE.

- */

-#if !defined(STM32_SERIAL_USE_USART3) || defined(__DOXYGEN__)

-#define STM32_SERIAL_USE_USART3             FALSE

-#endif

-

-/**

- * @brief   UART4 driver enable switch.

- * @details If set to @p TRUE the support for UART4 is included.

- * @note    The default is @p TRUE.

- */

-#if !defined(STM32_SERIAL_USE_UART4) || defined(__DOXYGEN__)

-#define STM32_SERIAL_USE_UART4              FALSE

-#endif

-

-/**

- * @brief   UART5 driver enable switch.

- * @details If set to @p TRUE the support for UART5 is included.

- * @note    The default is @p TRUE.

- */

-#if !defined(STM32_SERIAL_USE_UART5) || defined(__DOXYGEN__)

-#define STM32_SERIAL_USE_UART5              FALSE

-#endif

-

-/**

- * @brief   USART6 driver enable switch.

- * @details If set to @p TRUE the support for USART6 is included.

- * @note    The default is @p TRUE.

- */

-#if !defined(STM32_SERIAL_USE_USART6) || defined(__DOXYGEN__)

-#define STM32_SERIAL_USE_USART6             FALSE

-#endif

-

-/**

- * @brief   USART1 interrupt priority level setting.

- */

-#if !defined(STM32_SERIAL_USART1_PRIORITY) || defined(__DOXYGEN__)

-#define STM32_SERIAL_USART1_PRIORITY        12

-#endif

-

-/**

- * @brief   USART2 interrupt priority level setting.

- */

-#if !defined(STM32_SERIAL_USART2_PRIORITY) || defined(__DOXYGEN__)

-#define STM32_SERIAL_USART2_PRIORITY        12

-#endif

-

-/**

- * @brief   USART3 interrupt priority level setting.

- */

-#if !defined(STM32_SERIAL_USART3_PRIORITY) || defined(__DOXYGEN__)

-#define STM32_SERIAL_USART3_PRIORITY        12

-#endif

-

-/**

- * @brief   UART4 interrupt priority level setting.

- */

-#if !defined(STM32_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__)

-#define STM32_SERIAL_UART4_PRIORITY         12

-#endif

-

-/**

- * @brief   UART5 interrupt priority level setting.

- */

-#if !defined(STM32_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__)

-#define STM32_SERIAL_UART5_PRIORITY         12

-#endif

-

-/**

- * @brief   USART6 interrupt priority level setting.

- */

-#if !defined(STM32_SERIAL_USART6_PRIORITY) || defined(__DOXYGEN__)

-#define STM32_SERIAL_USART6_PRIORITY        12

-#endif

-/** @} */

-

-/*===========================================================================*/

-/* Derived constants and error checks.                                       */

-/*===========================================================================*/

-

-#if STM32_SERIAL_USE_USART1 && !STM32_HAS_USART1

-#error "USART1 not present in the selected device"

-#endif

-

-#if STM32_SERIAL_USE_USART2 && !STM32_HAS_USART2

-#error "USART2 not present in the selected device"

-#endif

-

-#if STM32_SERIAL_USE_USART3 && !STM32_HAS_USART3

-#error "USART3 not present in the selected device"

-#endif

-

-#if STM32_SERIAL_USE_UART4 && !STM32_HAS_UART4

-#error "UART4 not present in the selected device"

-#endif

-

-#if STM32_SERIAL_USE_UART5 && !STM32_HAS_UART5

-#error "UART5 not present in the selected device"

-#endif

-

-#if STM32_SERIAL_USE_USART6 && !STM32_HAS_USART6

-#error "USART6 not present in the selected device"

-#endif

-

-#if !STM32_SERIAL_USE_USART1 && !STM32_SERIAL_USE_USART2 &&                 \

-    !STM32_SERIAL_USE_USART3 && !STM32_SERIAL_USE_UART4  &&                 \

-    !STM32_SERIAL_USE_UART5  && !STM32_SERIAL_USE_USART6

-#error "SERIAL driver activated but no USART/UART peripheral assigned"

-#endif

-

-#if STM32_SERIAL_USE_USART1 &&                                              \

-    !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART1_PRIORITY)

-#error "Invalid IRQ priority assigned to USART1"

-#endif

-

-#if STM32_SERIAL_USE_USART2 &&                                              \

-    !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART2_PRIORITY)

-#error "Invalid IRQ priority assigned to USART2"

-#endif

-

-#if STM32_SERIAL_USE_USART3 &&                                              \

-    !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART3_PRIORITY)

-#error "Invalid IRQ priority assigned to USART3"

-#endif

-

-#if STM32_SERIAL_USE_UART4 &&                                               \

-    !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART4_PRIORITY)

-#error "Invalid IRQ priority assigned to UART4"

-#endif

-

-#if STM32_SERIAL_USE_UART5 &&                                               \

-    !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART5_PRIORITY)

-#error "Invalid IRQ priority assigned to UART5"

-#endif

-

-#if STM32_SERIAL_USE_USART6 &&                                              \

-    !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART6_PRIORITY)

-#error "Invalid IRQ priority assigned to USART6"

-#endif

-

-/*===========================================================================*/

-/* Driver data structures and types.                                         */

-/*===========================================================================*/

-

-/**

- * @brief   STM32 Serial Driver configuration structure.

- * @details An instance of this structure must be passed to @p sdStart()

- *          in order to configure and start a serial driver operations.

- * @note    This structure content is architecture dependent, each driver

- *          implementation defines its own version and the custom static

- *          initializers.

- */

-typedef struct {

-  /**

-   * @brief Bit rate.

-   */

-  uint32_t                  speed;

-  /* End of the mandatory fields.*/

-  /**

-   * @brief Initialization value for the CR1 register.

-   */

-  uint16_t                  cr1;

-  /**

-   * @brief Initialization value for the CR2 register.

-   */

-  uint16_t                  cr2;

-  /**

-   * @brief Initialization value for the CR3 register.

-   */

-  uint16_t                  cr3;

-} SerialConfig;

-

-/**

- * @brief   @p SerialDriver specific data.

- */

-#define _serial_driver_data                                                 \

-  _base_asynchronous_channel_data                                           \

-  /* Driver state.*/                                                        \

-  sdstate_t                 state;                                          \

-  /* Input queue.*/                                                         \

-  InputQueue                iqueue;                                         \

-  /* Output queue.*/                                                        \

-  OutputQueue               oqueue;                                         \

-  /* Input circular buffer.*/                                               \

-  uint8_t                   ib[SERIAL_BUFFERS_SIZE];                        \

-  /* Output circular buffer.*/                                              \

-  uint8_t                   ob[SERIAL_BUFFERS_SIZE];                        \

-  /* End of the mandatory fields.*/                                         \

-  /* Pointer to the USART registers block.*/                                \

-  USART_TypeDef             *usart;

-

-/*===========================================================================*/

-/* Driver macros.                                                            */

-/*===========================================================================*/

-

-/*

- * Extra USARTs definitions here (missing from the ST header file).

- */

-#define USART_CR2_STOP1_BITS    (0 << 12)   /**< @brief CR2 1 stop bit value.*/

-#define USART_CR2_STOP0P5_BITS  (1 << 12)   /**< @brief CR2 0.5 stop bit value.*/

-#define USART_CR2_STOP2_BITS    (2 << 12)   /**< @brief CR2 2 stop bit value.*/

-#define USART_CR2_STOP1P5_BITS  (3 << 12)   /**< @brief CR2 1.5 stop bit value.*/

-

-/*===========================================================================*/

-/* External declarations.                                                    */

-/*===========================================================================*/

-

-#if STM32_SERIAL_USE_USART1 && !defined(__DOXYGEN__)

-extern SerialDriver SD1;

-#endif

-#if STM32_SERIAL_USE_USART2 && !defined(__DOXYGEN__)

-extern SerialDriver SD2;

-#endif

-#if STM32_SERIAL_USE_USART3 && !defined(__DOXYGEN__)

-extern SerialDriver SD3;

-#endif

-#if STM32_SERIAL_USE_UART4 && !defined(__DOXYGEN__)

-extern SerialDriver SD4;

-#endif

-#if STM32_SERIAL_USE_UART5 && !defined(__DOXYGEN__)

-extern SerialDriver SD5;

-#endif

-#if STM32_SERIAL_USE_USART6 && !defined(__DOXYGEN__)

-extern SerialDriver SD6;

-#endif

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void sd_lld_init(void);

-  void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);

-  void sd_lld_stop(SerialDriver *sdp);

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* HAL_USE_SERIAL */

-

-#endif /* _SERIAL_LLD_H_ */

-

-/** @} */