git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@1883 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 18 insertions, 19 deletions

diff --git a/os/hal/platforms/LPC214x/serial_lld.h b/os/hal/platforms/LPC214x/serial_lld.h
index 6d47f9d95..a5cea7538 100644
--- a/os/hal/platforms/LPC214x/serial_lld.h
+++ b/os/hal/platforms/LPC214x/serial_lld.h
@@ -18,8 +18,9 @@
 */

 

 /**

- * @file LPC214x/serial_lld.h

- * @brief LPC214x low level serial driver header.

+ * @file    LPC214x/serial_lld.h

+ * @brief   LPC214x low level serial driver header.

+ *

  * @addtogroup LPC214x_SERIAL

  * @{

  */

@@ -38,45 +39,45 @@
 /*===========================================================================*/

 

 /**

- * @brief UART0 driver enable switch.

+ * @brief   UART0 driver enable switch.

  * @details If set to @p TRUE the support for UART0 is included.

- * @note The default is @p TRUE .

+ * @note    The default is @p TRUE .

  */

 #if !defined(USE_LPC214x_UART0) || defined(__DOXYGEN__)

 #define USE_LPC214x_UART0           TRUE

 #endif

 

 /**

- * @brief UART1 driver enable switch.

+ * @brief   UART1 driver enable switch.

  * @details If set to @p TRUE the support for UART1 is included.

- * @note The default is @p TRUE.

+ * @note    The default is @p TRUE.

  */

 #if !defined(USE_LPC214x_UART1) || defined(__DOXYGEN__)

 #define USE_LPC214x_UART1           TRUE

 #endif

 

 /**

- * @brief FIFO preload parameter.

+ * @brief   FIFO preload parameter.

  * @details Configuration parameter, this values defines how many bytes are

- * preloaded in the HW transmit FIFO for each interrupt, the maximum value is

- * 16 the minimum is 1.

- * @note An high value reduces the number of interrupts generated but can

- *       also increase the worst case interrupt response time because the

- *       preload loops.

+ *          preloaded in the HW transmit FIFO for each interrupt, the maximum

+ *          value is 16 the minimum is 1.

+ * @note    An high value reduces the number of interrupts generated but can

+ *          also increase the worst case interrupt response time because the

+ *          preload loops.

  */

 #if !defined(LPC214x_UART_FIFO_PRELOAD) || defined(__DOXYGEN__)

 #define LPC214x_UART_FIFO_PRELOAD   16

 #endif

 

 /**

- * @brief UART0 interrupt priority level setting.

+ * @brief   UART0 interrupt priority level setting.

  */

 #if !defined(LPC214x_UART0_PRIORITY) || defined(__DOXYGEN__)

 #define LPC214x_UART0_PRIORITY      1

 #endif

 

 /**

- * @brief UART1 interrupt priority level setting.

+ * @brief   UART1 interrupt priority level setting.

  */

 #if !defined(LPC214x_UART1_PRIORITY) || defined(__DOXYGEN__)

 #define LPC214x_UART1_PRIORITY      2

@@ -95,12 +96,12 @@
 /*===========================================================================*/

 

 /**

- * @brief Serial Driver condition flags type.

+ * @brief   Serial Driver condition flags type.

  */

 typedef uint32_t sdflags_t;

 

 /**

- * @brief LPC214x Serial Driver configuration structure.

+ * @brief   LPC214x Serial Driver configuration structure.

  * @details An instance of this structure must be passed to @p sdStart()

  *          in order to configure and start a serial driver operations.

  */

@@ -126,8 +127,6 @@ typedef struct {
   _base_asynchronous_channel_data                                           \

   /* Driver state.*/                                                        \

   sdstate_t                 state;                                          \

-  /* Current configuration data.*/                                          \

-  const SerialConfig        *config;                                        \

   /* Input queue.*/                                                         \

   InputQueue                iqueue;                                         \

   /* Output queue.*/                                                        \

@@ -163,7 +162,7 @@ extern SerialDriver SD2;
 extern "C" {

 #endif

   void sd_lld_init(void);

-  void sd_lld_start(SerialDriver *sdp);

+  void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);

   void sd_lld_stop(SerialDriver *sdp);

 #ifdef __cplusplus

 }