diff options
| author | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2013-08-10 14:58:16 +0000 |
|---|---|---|
| committer | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2013-08-10 14:58:16 +0000 |
| commit | 51b16c7a2dbd4f3d0be30049a4dad702961bfb8b (patch) | |
| tree | 2e43247fbfc993d21f3b66381999e15886bdc81e /os/hal/boards/ST_STM32VL_DISCOVERY/board.h | |
| parent | ff1b36acdc78609a835e3e20bf9897399c08806f (diff) | |
| download | ChibiOS-51b16c7a2dbd4f3d0be30049a4dad702961bfb8b.tar.gz ChibiOS-51b16c7a2dbd4f3d0be30049a4dad702961bfb8b.tar.bz2 ChibiOS-51b16c7a2dbd4f3d0be30049a4dad702961bfb8b.zip | |
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/boards/ST_STM32VL_DISCOVERY/board.h')
| -rw-r--r-- | os/hal/boards/ST_STM32VL_DISCOVERY/board.h | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/os/hal/boards/ST_STM32VL_DISCOVERY/board.h b/os/hal/boards/ST_STM32VL_DISCOVERY/board.h new file mode 100644 index 000000000..36e157d48 --- /dev/null +++ b/os/hal/boards/ST_STM32VL_DISCOVERY/board.h @@ -0,0 +1,143 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for STMicroelectronics STM32VL-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32VL_DISCOVERY
+#define BOARD_NAME "ST STM32VL-Discovery"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK 32768
+#define STM32_HSECLK 8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F10X_MD_VL
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON 0
+#define GPIOA_SPI1NSS 4
+
+#define GPIOB_SPI2NSS 12
+
+#define GPIOC_LED4 8
+#define GPIOC_LED3 9
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ * 0 - Analog input.
+ * 1 - Push Pull output 10MHz.
+ * 2 - Push Pull output 2MHz.
+ * 3 - Push Pull output 50MHz.
+ * 4 - Digital input.
+ * 5 - Open Drain output 10MHz.
+ * 6 - Open Drain output 2MHz.
+ * 7 - Open Drain output 50MHz.
+ * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ * 9 - Alternate Push Pull output 10MHz.
+ * A - Alternate Push Pull output 2MHz.
+ * B - Alternate Push Pull output 50MHz.
+ * C - Reserved.
+ * D - Alternate Open Drain output 10MHz.
+ * E - Alternate Open Drain output 2MHz.
+ * F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA0 - Normal input (BUTTON).
+ * PA2 - Alternate output (USART2 TX).
+ * PA3 - Normal input (USART2 RX).
+ * PA4 - Push pull output (SPI1 NSS), initially high state.
+ * PA5 - Alternate output (SPI1 SCK).
+ * PA6 - Normal input (SPI1 MISO).
+ * PA7 - Alternate output (SPI1 MOSI).
+ * PA9 - Alternate output (USART1 TX).
+ * PA10 - Normal input (USART1 RX).
+ */
+#define VAL_GPIOACRL 0xB4B34B84 /* PA7...PA0 */
+#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
+#define VAL_GPIOAODR 0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB12 - Push pull output (SPI2 NSS), initially high state.
+ * PB13 - Alternate output (SPI2 SCK).
+ * PB14 - Normal input (SPI2 MISO).
+ * PB15 - Alternate output (SPI2 MOSI).
+ */
+#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
+#define VAL_GPIOBCRH 0xB4B38888 /* PB15...PB8 */
+#define VAL_GPIOBODR 0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC8 - Push-pull output (LED4), initially low state.
+ * PC9 - Push-pull output (LED3), initially low state.
+ */
+#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
+#define VAL_GPIOCCRH 0x88888833 /* PC15...PC8 */
+#define VAL_GPIOCODR 0xFFFFFCFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0 - Normal input (XTAL).
+ * PD1 - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
+#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
+#define VAL_GPIODODR 0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
+#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
+#define VAL_GPIOEODR 0xFFFFFFFF
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
|