Mass update of the Apache 2.0 license statement.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11361 35acf78f-673a-0410-8e92-d51de3d6d3f4

2 files changed, 309 insertions, 309 deletions

diff --git a/os/hal/boards/ST_NUCLEO64_F103RB/board.c b/os/hal/boards/ST_NUCLEO64_F103RB/board.c
index 3e0199366..ac929a476 100644
--- a/os/hal/boards/ST_NUCLEO64_F103RB/board.c
+++ b/os/hal/boards/ST_NUCLEO64_F103RB/board.c
@@ -1,49 +1,49 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
-  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
-  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
-  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
-  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
-  stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}
+/*

+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+#include "hal.h"

+

+/**

+ * @brief   PAL setup.

+ * @details Digital I/O ports static configuration as defined in @p board.h.

+ *          This variable is used by the HAL when initializing the PAL driver.

+ */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

+const PALConfig pal_default_config =

+{

+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},

+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},

+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},

+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},

+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},

+};

+#endif

+

+/*

+ * Early initialization code.

+ * This initialization must be performed just after stack setup and before

+ * any other initialization.

+ */

+void __early_init(void) {

+

+  stm32_clock_init();

+}

+

+/*

+ * Board-specific initialization code.

+ */

+void boardInit(void) {

+}

diff --git a/os/hal/boards/ST_NUCLEO64_F103RB/board.h b/os/hal/boards/ST_NUCLEO64_F103RB/board.h
index 117c9423e..fe0e43959 100644
--- a/os/hal/boards/ST_NUCLEO64_F103RB/board.h
+++ b/os/hal/boards/ST_NUCLEO64_F103RB/board.h
@@ -1,260 +1,260 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the ST INEMO-M1 Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_NUCLEO64_F103RB
-#define BOARD_NAME              "STMicroelectronics NUCLEO-F103RB"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK            0
-
-#if defined(NUCLEO_EXTERNAL_OSCILLATOR)
-#define STM32_HSECLK            8000000
-#define STM32_HSE_BYPASS
-
-#elif defined(NUCLEO_HSE_CRYSTAL)
-#define STM32_HSECLK            8000000
-
-#else
-#define STM32_HSECLK            0
-#endif
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F103xB
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_ARD_A0                0U
-#define GPIOA_ADC1_IN0              0U
-#define GPIOA_ARD_A1                1U
-#define GPIOA_ADC1_IN1              1U
-#define GPIOA_ARD_D1                2U
-#define GPIOA_USART2_TX             2U
-#define GPIOA_ARD_D0                3U
-#define GPIOA_USART2_RX             3U
-#define GPIOA_ARD_A2                4U
-#define GPIOA_ADC1_IN4              4U
-#define GPIOA_LED_GREEN             5U
-#define GPIOA_ARD_D13               5U
-#define GPIOA_ARD_D12               6U
-#define GPIOA_ARD_D11               7U
-#define GPIOA_ARD_D7                8U
-#define GPIOA_ARD_D8                9U
-#define GPIOA_ARD_D2                10U
-#define GPIOA_PIN11                 11U
-#define GPIOA_PIN12                 12U
-#define GPIOA_SWDIO                 13U
-#define GPIOA_SWCLK                 14U
-#define GPIOA_PIN15                 15U
-
-#define GPIOB_ARD_A3                0U
-#define GPIOB_ADC1_IN8              0U
-#define GPIOB_PIN1                  1U
-#define GPIOB_PIN2                  2U
-#define GPIOB_SWO                   3U
-#define GPIOB_ARD_D3                3U
-#define GPIOB_ARD_D5                4U
-#define GPIOB_ARD_D4                5U
-#define GPIOB_ARD_D10               6U
-#define GPIOB_PIN7                  7U
-#define GPIOB_ARD_D15               8U
-#define GPIOB_ARD_D14               9U
-#define GPIOB_ARD_D6                10U
-#define GPIOB_PIN11                 11U
-#define GPIOB_PIN12                 12U
-#define GPIOB_PIN13                 13U
-#define GPIOB_PIN14                 14U
-#define GPIOB_PIN15                 15U
-
-#define GPIOC_ARD_A5                0U
-#define GPIOC_ADC1_IN11             0U
-#define GPIOC_ARD_A4                1U
-#define GPIOC_ADC1_IN10             1U
-#define GPIOC_PIN2                  2U
-#define GPIOC_PIN3                  3U
-#define GPIOC_PIN4                  4U
-#define GPIOC_PIN5                  5U
-#define GPIOC_PIN6                  6U
-#define GPIOC_ARD_D9                7U
-#define GPIOC_PIN8                  8U
-#define GPIOC_PIN9                  9U
-#define GPIOC_PIN10                 10U
-#define GPIOC_PIN11                 11U
-#define GPIOC_PIN12                 12U
-#define GPIOC_BUTTON                13U
-#define GPIOC_PIN14                 14U
-#define GPIOC_PIN15                 15U
-
-#define GPIOD_OSC_IN                0U
-#define GPIOD_PIN0                  0U
-#define GPIOD_OSC_OUT               1U
-#define GPIOD_PIN1                  1U
-#define GPIOD_PIN2                  2U
-#define GPIOD_PIN3                  3U
-#define GPIOD_PIN4                  4U
-#define GPIOD_PIN5                  5U
-#define GPIOD_PIN6                  6U
-#define GPIOD_PIN7                  7U
-#define GPIOD_PIN8                  8U
-#define GPIOD_PIN9                  9U
-#define GPIOD_PIN10                 10U
-#define GPIOD_PIN11                 11U
-#define GPIOD_PIN12                 12U
-#define GPIOD_PIN13                 13U
-#define GPIOD_PIN14                 14U
-#define GPIOD_PIN15                 15U
-
-#define GPIOE_PIN0                  0U
-#define GPIOE_PIN1                  1U
-#define GPIOE_PIN2                  2U
-#define GPIOE_PIN3                  3U
-#define GPIOE_PIN4                  4U
-#define GPIOE_PIN5                  5U
-#define GPIOE_PIN6                  6U
-#define GPIOE_PIN7                  7U
-#define GPIOE_PIN8                  8U
-#define GPIOE_PIN9                  9U
-#define GPIOE_PIN10                 10U
-#define GPIOE_PIN11                 11U
-#define GPIOE_PIN12                 12U
-#define GPIOE_PIN13                 13U
-#define GPIOE_PIN14                 14U
-#define GPIOE_PIN15                 15U
-
-#define GPIOF_PIN0                  0U
-#define GPIOF_PIN1                  1U
-#define GPIOF_PIN2                  2U
-#define GPIOF_PIN3                  3U
-#define GPIOF_PIN4                  4U
-#define GPIOF_PIN5                  5U
-#define GPIOF_PIN6                  6U
-#define GPIOF_PIN7                  7U
-#define GPIOF_PIN8                  8U
-#define GPIOF_PIN9                  9U
-#define GPIOF_PIN10                 10U
-#define GPIOF_PIN11                 11U
-#define GPIOF_PIN12                 12U
-#define GPIOF_PIN13                 13U
-#define GPIOF_PIN14                 14U
-#define GPIOF_PIN15                 15U
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- *   0 - Analog input.
- *   1 - Push Pull output 10MHz.
- *   2 - Push Pull output 2MHz.
- *   3 - Push Pull output 50MHz.
- *   4 - Digital input.
- *   5 - Open Drain output 10MHz.
- *   6 - Open Drain output 2MHz.
- *   7 - Open Drain output 50MHz.
- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
- *   9 - Alternate Push Pull output 10MHz.
- *   A - Alternate Push Pull output 2MHz.
- *   B - Alternate Push Pull output 50MHz.
- *   C - Reserved.
- *   D - Alternate Open Drain output 10MHz.
- *   E - Alternate Open Drain output 2MHz.
- *   F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA2  - Alternate output          (GPIOA_ARD_D1, GPIOA_USART2_TX).
- * PA3  - Normal input              (GPIOA_ARD_D0, GPIOA_USART2_RX).
- * PA5  - Push Pull output          (GPIOA_LED_GREEN).
- * PA13 - Pull-up input             (GPIOA_SWDIO).
- * PA14 - Pull-down input           (GPIOA_SWCLK).
- */
-#define VAL_GPIOACRL            0x88384B88      /*  PA7...PA0 */
-#define VAL_GPIOACRH            0x88888888      /* PA15...PA8 */
-#define VAL_GPIOAODR            0xFFFFBFDF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB3  - Pull-up input             (GPIOA_SWO).
- */
-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
-#define VAL_GPIOBCRH            0x88888888      /* PB15...PB8 */
-#define VAL_GPIOBODR            0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC13 - Normal input              (GPIOC_BUTTON).
- */
-#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
-#define VAL_GPIOCCRH            0x88488888      /* PC15...PC8 */
-#define VAL_GPIOCODR            0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0  - Normal input              (GPIOD_OSC_IN).
- * PD1  - Normal input              (GPIOD_OSC_OUT).
- */
-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
-#define VAL_GPIODODR            0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
-#define VAL_GPIOEODR            0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-#define usb_lld_connect_bus(usbp)
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-#define usb_lld_disconnect_bus(usbp)
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
+/*

+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+#ifndef _BOARD_H_

+#define _BOARD_H_

+

+/*

+ * Setup for the ST INEMO-M1 Discovery board.

+ */

+

+/*

+ * Board identifier.

+ */

+#define BOARD_ST_NUCLEO64_F103RB

+#define BOARD_NAME              "STMicroelectronics NUCLEO-F103RB"

+

+/*

+ * Board frequencies.

+ */

+#define STM32_LSECLK            0

+

+#if defined(NUCLEO_EXTERNAL_OSCILLATOR)

+#define STM32_HSECLK            8000000

+#define STM32_HSE_BYPASS

+

+#elif defined(NUCLEO_HSE_CRYSTAL)

+#define STM32_HSECLK            8000000

+

+#else

+#define STM32_HSECLK            0

+#endif

+

+/*

+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.

+ */

+#define STM32F103xB

+

+/*

+ * IO pins assignments.

+ */

+#define GPIOA_ARD_A0                0U

+#define GPIOA_ADC1_IN0              0U

+#define GPIOA_ARD_A1                1U

+#define GPIOA_ADC1_IN1              1U

+#define GPIOA_ARD_D1                2U

+#define GPIOA_USART2_TX             2U

+#define GPIOA_ARD_D0                3U

+#define GPIOA_USART2_RX             3U

+#define GPIOA_ARD_A2                4U

+#define GPIOA_ADC1_IN4              4U

+#define GPIOA_LED_GREEN             5U

+#define GPIOA_ARD_D13               5U

+#define GPIOA_ARD_D12               6U

+#define GPIOA_ARD_D11               7U

+#define GPIOA_ARD_D7                8U

+#define GPIOA_ARD_D8                9U

+#define GPIOA_ARD_D2                10U

+#define GPIOA_PIN11                 11U

+#define GPIOA_PIN12                 12U

+#define GPIOA_SWDIO                 13U

+#define GPIOA_SWCLK                 14U

+#define GPIOA_PIN15                 15U

+

+#define GPIOB_ARD_A3                0U

+#define GPIOB_ADC1_IN8              0U

+#define GPIOB_PIN1                  1U

+#define GPIOB_PIN2                  2U

+#define GPIOB_SWO                   3U

+#define GPIOB_ARD_D3                3U

+#define GPIOB_ARD_D5                4U

+#define GPIOB_ARD_D4                5U

+#define GPIOB_ARD_D10               6U

+#define GPIOB_PIN7                  7U

+#define GPIOB_ARD_D15               8U

+#define GPIOB_ARD_D14               9U

+#define GPIOB_ARD_D6                10U

+#define GPIOB_PIN11                 11U

+#define GPIOB_PIN12                 12U

+#define GPIOB_PIN13                 13U

+#define GPIOB_PIN14                 14U

+#define GPIOB_PIN15                 15U

+

+#define GPIOC_ARD_A5                0U

+#define GPIOC_ADC1_IN11             0U

+#define GPIOC_ARD_A4                1U

+#define GPIOC_ADC1_IN10             1U

+#define GPIOC_PIN2                  2U

+#define GPIOC_PIN3                  3U

+#define GPIOC_PIN4                  4U

+#define GPIOC_PIN5                  5U

+#define GPIOC_PIN6                  6U

+#define GPIOC_ARD_D9                7U

+#define GPIOC_PIN8                  8U

+#define GPIOC_PIN9                  9U

+#define GPIOC_PIN10                 10U

+#define GPIOC_PIN11                 11U

+#define GPIOC_PIN12                 12U

+#define GPIOC_BUTTON                13U

+#define GPIOC_PIN14                 14U

+#define GPIOC_PIN15                 15U

+

+#define GPIOD_OSC_IN                0U

+#define GPIOD_PIN0                  0U

+#define GPIOD_OSC_OUT               1U

+#define GPIOD_PIN1                  1U

+#define GPIOD_PIN2                  2U

+#define GPIOD_PIN3                  3U

+#define GPIOD_PIN4                  4U

+#define GPIOD_PIN5                  5U

+#define GPIOD_PIN6                  6U

+#define GPIOD_PIN7                  7U

+#define GPIOD_PIN8                  8U

+#define GPIOD_PIN9                  9U

+#define GPIOD_PIN10                 10U

+#define GPIOD_PIN11                 11U

+#define GPIOD_PIN12                 12U

+#define GPIOD_PIN13                 13U

+#define GPIOD_PIN14                 14U

+#define GPIOD_PIN15                 15U

+

+#define GPIOE_PIN0                  0U

+#define GPIOE_PIN1                  1U

+#define GPIOE_PIN2                  2U

+#define GPIOE_PIN3                  3U

+#define GPIOE_PIN4                  4U

+#define GPIOE_PIN5                  5U

+#define GPIOE_PIN6                  6U

+#define GPIOE_PIN7                  7U

+#define GPIOE_PIN8                  8U

+#define GPIOE_PIN9                  9U

+#define GPIOE_PIN10                 10U

+#define GPIOE_PIN11                 11U

+#define GPIOE_PIN12                 12U

+#define GPIOE_PIN13                 13U

+#define GPIOE_PIN14                 14U

+#define GPIOE_PIN15                 15U

+

+#define GPIOF_PIN0                  0U

+#define GPIOF_PIN1                  1U

+#define GPIOF_PIN2                  2U

+#define GPIOF_PIN3                  3U

+#define GPIOF_PIN4                  4U

+#define GPIOF_PIN5                  5U

+#define GPIOF_PIN6                  6U

+#define GPIOF_PIN7                  7U

+#define GPIOF_PIN8                  8U

+#define GPIOF_PIN9                  9U

+#define GPIOF_PIN10                 10U

+#define GPIOF_PIN11                 11U

+#define GPIOF_PIN12                 12U

+#define GPIOF_PIN13                 13U

+#define GPIOF_PIN14                 14U

+#define GPIOF_PIN15                 15U

+/*

+ * I/O ports initial setup, this configuration is established soon after reset

+ * in the initialization code.

+ *

+ * The digits have the following meaning:

+ *   0 - Analog input.

+ *   1 - Push Pull output 10MHz.

+ *   2 - Push Pull output 2MHz.

+ *   3 - Push Pull output 50MHz.

+ *   4 - Digital input.

+ *   5 - Open Drain output 10MHz.

+ *   6 - Open Drain output 2MHz.

+ *   7 - Open Drain output 50MHz.

+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.

+ *   9 - Alternate Push Pull output 10MHz.

+ *   A - Alternate Push Pull output 2MHz.

+ *   B - Alternate Push Pull output 50MHz.

+ *   C - Reserved.

+ *   D - Alternate Open Drain output 10MHz.

+ *   E - Alternate Open Drain output 2MHz.

+ *   F - Alternate Open Drain output 50MHz.

+ * Please refer to the STM32 Reference Manual for details.

+ */

+

+/*

+ * Port A setup.

+ * Everything input with pull-up except:

+ * PA2  - Alternate output          (GPIOA_ARD_D1, GPIOA_USART2_TX).

+ * PA3  - Normal input              (GPIOA_ARD_D0, GPIOA_USART2_RX).

+ * PA5  - Push Pull output          (GPIOA_LED_GREEN).

+ * PA13 - Pull-up input             (GPIOA_SWDIO).

+ * PA14 - Pull-down input           (GPIOA_SWCLK).

+ */

+#define VAL_GPIOACRL            0x88384B88      /*  PA7...PA0 */

+#define VAL_GPIOACRH            0x88888888      /* PA15...PA8 */

+#define VAL_GPIOAODR            0xFFFFBFDF

+

+/*

+ * Port B setup.

+ * Everything input with pull-up except:

+ * PB3  - Pull-up input             (GPIOA_SWO).

+ */

+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */

+#define VAL_GPIOBCRH            0x88888888      /* PB15...PB8 */

+#define VAL_GPIOBODR            0xFFFFFFFF

+

+/*

+ * Port C setup.

+ * Everything input with pull-up except:

+ * PC13 - Normal input              (GPIOC_BUTTON).

+ */

+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */

+#define VAL_GPIOCCRH            0x88488888      /* PC15...PC8 */

+#define VAL_GPIOCODR            0xFFFFFFFF

+

+/*

+ * Port D setup.

+ * Everything input with pull-up except:

+ * PD0  - Normal input              (GPIOD_OSC_IN).

+ * PD1  - Normal input              (GPIOD_OSC_OUT).

+ */

+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */

+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */

+#define VAL_GPIODODR            0xFFFFFFFF

+

+/*

+ * Port E setup.

+ * Everything input with pull-up except:

+ */

+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */

+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */

+#define VAL_GPIOEODR            0xFFFFFFFF

+

+/*

+ * USB bus activation macro, required by the USB driver.

+ */

+#define usb_lld_connect_bus(usbp)

+

+/*

+ * USB bus de-activation macro, required by the USB driver.

+ */

+#define usb_lld_disconnect_bus(usbp)

+

+#if !defined(_FROM_ASM_)

+#ifdef __cplusplus

+extern "C" {

+#endif

+  void boardInit(void);

+#ifdef __cplusplus

+}

+#endif

+#endif /* _FROM_ASM_ */

+

+#endif /* _BOARD_H_ */