aboutsummaryrefslogtreecommitdiffstats
path: root/os/hal/boards/OLIMEX_STM32_P107
diff options
context:
space:
mode:
authorgdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4>2013-08-10 14:58:16 +0000
committergdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4>2013-08-10 14:58:16 +0000
commit51b16c7a2dbd4f3d0be30049a4dad702961bfb8b (patch)
tree2e43247fbfc993d21f3b66381999e15886bdc81e /os/hal/boards/OLIMEX_STM32_P107
parentff1b36acdc78609a835e3e20bf9897399c08806f (diff)
downloadChibiOS-51b16c7a2dbd4f3d0be30049a4dad702961bfb8b.tar.gz
ChibiOS-51b16c7a2dbd4f3d0be30049a4dad702961bfb8b.tar.bz2
ChibiOS-51b16c7a2dbd4f3d0be30049a4dad702961bfb8b.zip
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/boards/OLIMEX_STM32_P107')
-rw-r--r--os/hal/boards/OLIMEX_STM32_P107/board.c84
-rw-r--r--os/hal/boards/OLIMEX_STM32_P107/board.h193
-rw-r--r--os/hal/boards/OLIMEX_STM32_P107/board.mk5
3 files changed, 282 insertions, 0 deletions
diff --git a/os/hal/boards/OLIMEX_STM32_P107/board.c b/os/hal/boards/OLIMEX_STM32_P107/board.c
new file mode 100644
index 000000000..586c27c13
--- /dev/null
+++ b/os/hal/boards/OLIMEX_STM32_P107/board.c
@@ -0,0 +1,84 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+ {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+ {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+ {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+ {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+ {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+ stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI
+/*
+ * Card detection through the card internal pull-up on D3.
+ */
+bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+ static bool_t last_status = FALSE;
+
+ (void)mmcp;
+ if ((palReadLatch(GPIOA) & PAL_PORT_BIT(GPIOA_SPI3_CS_MMC)) == 0)
+ return last_status;
+ return last_status = (bool_t)palReadPad(GPIOA, GPIOA_SPI3_CS_MMC);
+}
+
+/*
+ * Card write protection detection is not possible, the card is always
+ * reported as not protected.
+ */
+bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+ (void)mmcp;
+ return FALSE;
+}
+#endif
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+
+ /*
+ * Several I/O pins are re-mapped:
+ * USART3 to the PD8/PD9 pins.
+ * I2C1 to the PB8/PB9 pins.
+ * SPI3 to the PC10/PC11/PC12 pins.
+ */
+ AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_FULLREMAP |
+ AFIO_MAPR_I2C1_REMAP |
+ AFIO_MAPR_SPI3_REMAP;
+}
diff --git a/os/hal/boards/OLIMEX_STM32_P107/board.h b/os/hal/boards/OLIMEX_STM32_P107/board.h
new file mode 100644
index 000000000..8bf523d33
--- /dev/null
+++ b/os/hal/boards/OLIMEX_STM32_P107/board.h
@@ -0,0 +1,193 @@
+/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for the Olimex STM32-P107 Rev.A evaluation board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_OLIMEX_STM32_P107_REV_A
+#define BOARD_NAME "Olimex STM32-P107 Rev.A"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK 32768
+#define STM32_HSECLK 25000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F10X_CL
+
+/*
+ * Ethernet PHY type.
+ */
+#define BOARD_PHY_ID MII_STE101P_ID
+#define BOARD_PHY_RMII
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_SWITCH_WKUP 0
+#define GPIOA_SPI3_CS_MMC 4
+#define GPIOC_LED_STATUS1 6
+#define GPIOC_LED_STATUS2 7
+#define GPIOC_SWITCH_TAMPER 13
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ * 0 - Analog input.
+ * 1 - Push Pull output 10MHz.
+ * 2 - Push Pull output 2MHz.
+ * 3 - Push Pull output 50MHz.
+ * 4 - Digital input.
+ * 5 - Open Drain output 10MHz.
+ * 6 - Open Drain output 2MHz.
+ * 7 - Open Drain output 50MHz.
+ * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ * 9 - Alternate Push Pull output 10MHz.
+ * A - Alternate Push Pull output 2MHz.
+ * B - Alternate Push Pull output 50MHz.
+ * C - Reserved.
+ * D - Alternate Open Drain output 10MHz.
+ * E - Alternate Open Drain output 2MHz.
+ * F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA0 - Normal input (WKUP BUTTON).
+ * PA1 - Normal input (ETH_RMII_REF_CLK).
+ * PA2 - Alternate output (ETH_RMII_MDIO).
+ * PA3 - Input with PU (unconnected).
+ * PA4 - Open Drain output (CS_MMC).
+ * PA5 - Input with PU (unconnected).
+ * PA6 - Input with PU (unconnected).
+ * PA7 - Normal input (ETH_RMII_CRS_DV).
+ * PA8 - Alternate output (MCO).
+ * PA9 - Normal input (OTG_VBUS).
+ * PA10 - Normal input (OTG_ID).
+ * PA11 - Normal input (OTG_DM).
+ * PA12 - Normal input (OTG_DP).
+ * PA13 - Normal input (TMS).
+ * PA14 - Normal input (TCK).
+ * PA15 - Normal input (TDI).
+ */
+#define VAL_GPIOACRL 0x48878B44 /* PA7...PA0 */
+#define VAL_GPIOACRH 0x4444444B /* PA15...PA8 */
+#define VAL_GPIOAODR 0xFFFFFFFF
+
+/*
+ * Port B setup:
+ * PB0 - Input with PU (unconnected).
+ * PB1 - Input with PU (unconnected).
+ * PB2 - Normal input (BOOT1).
+ * PB3 - Normal input (TDO).
+ * PB4 - Normal input (TRST).
+ * PB5 - Input with PU (unconnected).
+ * PB6 - Input with PU (unconnected).
+ * PB7 - Input with PU (unconnected).
+ * PB8 - Alternate O.D. (I2C1 SCL, remapped).
+ * PB9 - Alternate O.D. (I2C1 SDA, remapped).
+ * PB10 - Input with PU (unconnected).
+ * PB11 - Alternate output (ETH_RMII_TX_EN).
+ * PB12 - Alternate output (ETH_RMII_TXD0).
+ * PB13 - Alternate output (ETH_RMII_TXD1).
+ * PB14 - Input with PU (unconnected).
+ * PB15 - Push Pull output (CS_UEXT).
+ */
+#define VAL_GPIOBCRL 0x88844488 /* PB7...PB0 */
+#define VAL_GPIOBCRH 0x38BBB8FF /* PB15...PB8 */
+#define VAL_GPIOBODR 0xFFFFFFFF
+
+/*
+ * Port C setup:
+ * PC0 - Input with PU (unconnected).
+ * PC1 - Alternate output (ETH_MDC).
+ * PC2 - Input with PU (unconnected).
+ * PC3 - Input with PU (unconnected).
+ * PC4 - Normal input (ETH_RMII_RXD0).
+ * PC5 - Normal input (ETH_RMII_RXD1).
+ * PC6 - Push Pull output (STAT1 green LED).
+ * PC7 - Push Pull output (STAT2 yellow LED).
+ * PC8 - Input with PU (unconnected).
+ * PC9 - Input with PU (unconnected).
+ * PC10 - Alternate output (SPI3 SCK).
+ * PC11 - Input with PU (SPI3 MISO).
+ * PC12 - Alternate output (SPI3 MOSI).
+ * PC13 - Normal input (TAMPER).
+ * PC14 - Normal input (OSC32 IN).
+ * PC15 - Normal input (OSC32 OUT).
+ */
+#define VAL_GPIOCCRL 0x334488B8 /* PC7...PC0 */
+#define VAL_GPIOCCRH 0x444B8B88 /* PC15...PC8 */
+#define VAL_GPIOCODR 0xFFFFFF3F
+
+/*
+ * Port D setup:
+ * PD0 - Input with PU (unconnected).
+ * PD1 - Input with PU (unconnected).
+ * PD2 - Input with PU (unconnected).
+ * PD3 - Input with PU (unconnected).
+ * PD4 - Input with PU (unconnected).
+ * PD5 - Alternate output (USART2 TX, UEXT).
+ * PD6 - Input with PU (USART2 RX, UEXT).
+ * PD7 - Push Pull output (USB_VBUSON).
+ * PD8 - Alternate output (USART2 TX, remapped).
+ * PD9 - Normal input (USART2 RX, remapped).
+ * PD10 - Input with PU (unconnected).
+ * PD11 - Normal input (USART2 CTS, remapped).
+ * PD12 - Alternate output (USART2 RTS, remapped).
+ * PD13 - Input with PU (unconnected).
+ * PD14 - Input with PU (unconnected).
+ * PD15 - Input with PU (unconnected).
+ */
+#define VAL_GPIODCRL 0x38B88888 /* PD7...PD0 */
+#define VAL_GPIODCRH 0x888B484B /* PD15...PD8 */
+#define VAL_GPIODODR 0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ * PE14 - Normal input (ETH_RMII_MDINT).
+ * PE15 - Normal input (USB_FAULT).
+ */
+#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
+#define VAL_GPIOECRH 0x44888888 /* PE15...PE8 */
+#define VAL_GPIOEODR 0xFFFFFFFF
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
diff --git a/os/hal/boards/OLIMEX_STM32_P107/board.mk b/os/hal/boards/OLIMEX_STM32_P107/board.mk
new file mode 100644
index 000000000..63f70119a
--- /dev/null
+++ b/os/hal/boards/OLIMEX_STM32_P107/board.mk
@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_P107/board.c
+
+# Required include directories
+BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_P107