diff options
| author | Rocco Marco Guglielmi <roccomarco.guglielmi@gmail.com> | 2018-03-09 13:54:25 +0000 |
|---|---|---|
| committer | Rocco Marco Guglielmi <roccomarco.guglielmi@gmail.com> | 2018-03-09 13:54:25 +0000 |
| commit | be86d4b3430a745634bb706c6ae6a9aabb716440 (patch) | |
| tree | ed719ad313003fc50557de47917217c1e8007c4d /os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h | |
| parent | 0b1cba4c2e057efcbd652a4026c6bc10527cac41 (diff) | |
| download | ChibiOS-be86d4b3430a745634bb706c6ae6a9aabb716440.tar.gz ChibiOS-be86d4b3430a745634bb706c6ae6a9aabb716440.tar.bz2 ChibiOS-be86d4b3430a745634bb706c6ae6a9aabb716440.zip | |
Removed unsupported old demo
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11664 110e8d01-0319-4d1e-a829-52ad28d1bb01
Diffstat (limited to 'os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h')
| -rw-r--r-- | os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h | 520 |
1 files changed, 0 insertions, 520 deletions
diff --git a/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h b/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h deleted file mode 100644 index 7a9cf1ae6..000000000 --- a/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.h +++ /dev/null @@ -1,520 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for STMicroelectronics STM32F4-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_NONSTANDARD_STM32F4_BARTHESS1
-#define BOARD_NAME "Hand made STM32F4x board"
-
-/*
- * Board frequencies.
- * NOTE: The LSE crystal is not fitted by default on the board.
- */
-#define STM32_LSECLK 32768
-#define STM32_HSECLK 8000000
-
-/*
- * Board voltages.
- * Required for performance limits calculation.
- */
-#define STM32_VDD 300
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F407xx
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_USART2_CTS 0 /* xbee */
-#define GPIOA_USART2_RTS 1 /* xbee */
-#define GPIOA_USART2_TX 2 /* xbee */
-#define GPIOA_USART2_RX 3 /* xbee */
-#define GPIOA_SPI1_NSS 4
-#define GPIOA_SPI1_SCK 5
-#define GPIOA_SPI1_MISO 6
-#define GPIOA_SPI1_MOSI 7
-#define GPIOA_5V_DOMAIN_EN 8
-#define GPIOA_USART1_TX 9 /* gps */
-#define GPIOA_USART1_RX 10/* gps */
-#define GPIOA_OTG_FS_DM 11
-#define GPIOA_OTG_FS_DP 12
-#define GPIOA_JTMS 13
-#define GPIOA_JTCK 14
-#define GPIOA_JTDI 15
-
-#define GPIOB_RECEIVER_PPM 0
-#define GPIOB_TACHOMETER 1
-#define GPIOB_BOOT1 2
-#define GPIOB_JTDO 3
-#define GPIOB_NJTRST 4
-#define GPIOB_LED_R 6
-#define GPIOB_LED_G 7
-#define GPIOB_LED_B 8
-#define GPIOB_I2C2_SCL 10
-#define GPIOB_I2C2_SDA 11
-
-
-#define GPIOC_AN_CURRENT_SENS 0
-#define GPIOC_AN_SUPPLY_SENS 1
-#define GPIOC_AN_6V_SENS 2
-#define GPIOC_AN33_0 3
-#define GPIOC_AN33_1 4
-#define GPIOC_AN33_2 5
-#define GPIOC_SDIO_D0 8
-#define GPIOC_SDIO_D1 9
-#define GPIOC_SDIO_D2 10
-#define GPIOC_SDIO_D3 11
-#define GPIOC_SDIO_CK 12
-#define GPIOC_TAMPER_RTC 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
-
-#define GPIOD_SDIO_CMD 2
-#define GPIOD_PWM1 12
-#define GPIOD_PWM2 13
-#define GPIOD_PWM3 14
-#define GPIOD_PWM4 15
-
-#define GPIOE_GPS_PPS 0
-#define GPIOE_XBEE_SLEEP 1
-#define GPIOE_XBEE_RESET 2
-#define GPIOE_SDIO_DETECT 3
-#define GPIOE_USB_DISCOVERY 4
-#define GPIOE_GPS_PWR_EN 5
-#define GPIOE_BMP085_EOC 6
-#define GPIOE_MAG_INT 7
-#define GPIOE_MMA8451_INT1 8
-#define GPIOE_PWM5 9
-#define GPIOE_ITG3200_INT 10
-#define GPIOE_PWM6 11
-#define GPIOE_PWM7 13
-#define GPIOE_PWM8 14
-#define GPIOE_MMA8451_INT2 15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- *
- * 1 for open drain outputs denotes hi-Z state
- */
-#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
-#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
-#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
-#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
-#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
-#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
-#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
-#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
-#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
-#define PIN_PUDR_FLOATING(n) (0U << ((n) * 2))
-#define PIN_PUDR_PULLUP(n) (1U << ((n) * 2))
-#define PIN_PUDR_PULLDOWN(n) (2U << ((n) * 2))
-#define PIN_AFIO_AF(n, v) ((v##U) << (((n) % 8) * 4))
-
-/*
- * Port A setup.
- * All input with pull-up except:
-#define GPIOA_USART2_CTS 0 //xbee
-#define GPIOA_USART2_RTS 1 //xbee
-#define GPIOA_USART2_TX 2 //xbee
-#define GPIOA_USART2_Rx 3 //xbee
-#define GPIOA_SPI1_NSS 4
-#define GPIOA_SPI1_SCK 5
-#define GPIOA_SPI1_MISO 6
-#define GPIOA_SPI1_MOSI 7
-#define GPIOA_5V_DOMAIN_EN 8
-#define GPIOA_USART1_TX 9
-#define GPIOA_USART1_RX 10
-#define GPIOA_OTG_FS_DM 11
-#define GPIOA_OTG_FS_DP 12
-#define GPIOA_JTMS 13
-#define GPIOA_JTCK 14
-#define GPIOA_JTDI 15
- */
-
-/* default after reset 0xA8000000 */
-#define VAL_GPIOA_MODER (PIN_MODE_ALTERNATE(GPIOA_USART2_CTS) | \
- PIN_MODE_ALTERNATE(GPIOA_USART2_RTS) | \
- PIN_MODE_ALTERNATE(GPIOA_USART2_TX) | \
- PIN_MODE_ALTERNATE(GPIOA_USART2_RX) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_NSS) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_SCK) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_MISO) | \
- PIN_MODE_ALTERNATE(GPIOA_SPI1_MOSI) | \
- PIN_MODE_OUTPUT(GPIOA_5V_DOMAIN_EN) | \
- PIN_MODE_ALTERNATE(GPIOA_USART1_TX) | \
- PIN_MODE_ALTERNATE(GPIOA_USART1_RX) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
- PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
- PIN_MODE_ALTERNATE(GPIOA_JTMS) | \
- PIN_MODE_ALTERNATE(GPIOA_JTCK) | \
- PIN_MODE_ALTERNATE(GPIOA_JTDI))
-/* default 0x00000000 */
-#define VAL_GPIOA_OTYPER 0x00000000
-/* default 0x00000000 */
-#define VAL_GPIOA_OSPEEDR 0x00000000
-/* 0x64000000 */
-#define VAL_GPIOA_PUPDR (PIN_PUDR_FLOATING(GPIOA_USART2_CTS) | \
- PIN_PUDR_FLOATING(GPIOA_USART2_RTS) | \
- PIN_PUDR_FLOATING(GPIOA_USART2_TX) | \
- PIN_PUDR_FLOATING(GPIOA_USART2_RX) | \
- PIN_PUDR_PULLUP(GPIOA_SPI1_NSS) | \
- PIN_PUDR_PULLUP(GPIOA_SPI1_SCK) | \
- PIN_PUDR_PULLUP(GPIOA_SPI1_MISO) | \
- PIN_PUDR_PULLUP(GPIOA_SPI1_MOSI) | \
- PIN_PUDR_FLOATING(GPIOA_5V_DOMAIN_EN) | \
- PIN_PUDR_FLOATING(GPIOA_USART1_TX) | \
- PIN_PUDR_FLOATING(GPIOA_USART1_RX) | \
- PIN_PUDR_FLOATING(GPIOA_OTG_FS_DM) | \
- PIN_PUDR_FLOATING(GPIOA_OTG_FS_DP) | \
- PIN_PUDR_PULLUP(GPIOA_JTMS) | \
- PIN_PUDR_PULLDOWN(GPIOA_JTCK) | \
- PIN_PUDR_PULLUP(GPIOA_JTDI))
-/* 0x00000000 */
-#define VAL_GPIOA_ODR 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_USART2_CTS, 7) | \
- PIN_AFIO_AF(GPIOA_USART2_RTS, 7) | \
- PIN_AFIO_AF(GPIOA_USART2_TX, 7) | \
- PIN_AFIO_AF(GPIOA_USART2_RX, 7)| \
- PIN_AFIO_AF(GPIOA_SPI1_NSS, 5) | \
- PIN_AFIO_AF(GPIOA_SPI1_SCK, 5) | \
- PIN_AFIO_AF(GPIOA_SPI1_MISO, 5) | \
- PIN_AFIO_AF(GPIOA_SPI1_MOSI, 5))
-/* 0x00000000 */
-#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_USART1_TX, 7) | \
- PIN_AFIO_AF(GPIOA_USART1_RX, 7) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \
- PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \
- PIN_AFIO_AF(GPIOA_JTMS, 0) | \
- PIN_AFIO_AF(GPIOA_JTCK, 0) | \
- PIN_AFIO_AF(GPIOA_JTDI, 0))
-
-/*
- * Port B setup.
-#define GPIOB_RECEIVER_PPM 0
-#define GPIOB_TACHOMETER 1
-#define GPIOB_BOOT1 2
-#define GPIOB_JTDO 3
-#define GPIOB_NJTRST 4
-#define GPIOB_LED_R 6
-#define GPIOB_LED_G 7
-#define GPIOB_LED_B 8
-#define GPIOB_I2C2_SCL 10
-#define GPIOB_I2C2_SDA 11
- */
-/* 0x00000280 */
-#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_RECEIVER_PPM) | \
- PIN_MODE_INPUT(GPIOB_TACHOMETER) | \
- PIN_MODE_INPUT(GPIOB_BOOT1) | \
- PIN_MODE_ALTERNATE(GPIOB_JTDO) | \
- PIN_MODE_ALTERNATE(GPIOB_NJTRST) | \
- PIN_MODE_INPUT(5) | \
- PIN_MODE_OUTPUT(GPIOB_LED_R) | \
- PIN_MODE_OUTPUT(GPIOB_LED_G) | \
- PIN_MODE_OUTPUT(GPIOB_LED_B) | \
- PIN_MODE_INPUT(9) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C2_SCL) | \
- PIN_MODE_ALTERNATE(GPIOB_I2C2_SDA) | \
- PIN_MODE_INPUT(12) | \
- PIN_MODE_INPUT(13) | \
- PIN_MODE_INPUT(14) | \
- PIN_MODE_INPUT(15))
-/* 0x00000000 */
-#define VAL_GPIOB_OTYPER (PIN_OTYPE_OPENDRAIN(GPIOB_LED_R) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_LED_G) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_LED_B) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C2_SCL) | \
- PIN_OTYPE_OPENDRAIN(GPIOB_I2C2_SDA))
-/* 0x000000C0 */
-#define VAL_GPIOB_OSPEEDR 0x000000C0//0xAAAAAAEA
-/* 0x00000100 */
-#define VAL_GPIOB_PUPDR (PIN_PUDR_PULLDOWN(GPIOB_RECEIVER_PPM) | \
- PIN_PUDR_PULLDOWN(GPIOB_TACHOMETER) | \
- PIN_PUDR_FLOATING(GPIOB_BOOT1) | \
- PIN_PUDR_FLOATING(GPIOB_JTDO) | \
- PIN_PUDR_PULLUP(GPIOB_NJTRST) | \
- PIN_PUDR_FLOATING(5) | \
- PIN_PUDR_FLOATING(GPIOB_LED_R) | \
- PIN_PUDR_FLOATING(GPIOB_LED_G) | \
- PIN_PUDR_FLOATING(GPIOB_LED_B) | \
- PIN_PUDR_FLOATING(9) | \
- PIN_PUDR_FLOATING(GPIOB_I2C2_SCL) | \
- PIN_PUDR_FLOATING(GPIOB_I2C2_SDA) | \
- PIN_PUDR_PULLUP(12) | \
- PIN_PUDR_PULLUP(13) | \
- PIN_PUDR_PULLUP(14) | \
- PIN_PUDR_PULLUP(15))
-/* 0x00000000 */
-#define VAL_GPIOB_ODR 0x000001C0
-/* 0x00000000 */
-#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_RECEIVER_PPM, 0) | \
- PIN_AFIO_AF(GPIOB_JTDO, 0))
-/* 0x00000000 */
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_I2C2_SCL, 4) | \
- PIN_AFIO_AF(GPIOB_I2C2_SDA, 4))
-
-
-/*
- * Port C setup.
-#define GPIOC_AN_CURRENT_SENS 0
-#define GPIOC_AN_SUPPLY_SENS 1
-#define GPIOC_AN_6V_SENS 2
-#define GPIOC_AN33_0 3
-#define GPIOC_AN33_1 4
-#define GPIOC_AN33_2 5
-
-#define GPIOC_SDIO_D0 8
-#define GPIOC_SDIO_D1 9
-#define GPIOC_SDIO_D2 10
-#define GPIOC_SDIO_D3 11
-#define GPIOC_SDIO_CK 12
-
-#define GPIOC_TAMPER_RTC 13
-#define GPIOC_OSC32_IN 14
-#define GPIOC_OSC32_OUT 15
- */
-/* 0x00000000 */
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_AN_CURRENT_SENS) | \
- PIN_MODE_ANALOG(GPIOC_AN_SUPPLY_SENS) | \
- PIN_MODE_ANALOG(GPIOC_AN_6V_SENS) | \
- PIN_MODE_ANALOG(GPIOC_AN33_0) | \
- PIN_MODE_ANALOG(GPIOC_AN33_1) | \
- PIN_MODE_ANALOG(GPIOC_AN33_2) | \
- PIN_MODE_INPUT(6) | \
- PIN_MODE_INPUT(7) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIO_D0) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIO_D1) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIO_D2) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIO_D3) | \
- PIN_MODE_ALTERNATE(GPIOC_SDIO_CK) | \
- PIN_MODE_INPUT(GPIOC_TAMPER_RTC) | \
- PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
- PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-
-/* 0x00000000 */
-#define VAL_GPIOC_OTYPER 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_25M(GPIOC_SDIO_D0) | \
- PIN_OSPEED_25M(GPIOC_SDIO_D1) | \
- PIN_OSPEED_25M(GPIOC_SDIO_D2) | \
- PIN_OSPEED_25M(GPIOC_SDIO_D3) | \
- PIN_OSPEED_25M(GPIOC_SDIO_CK) | \
- PIN_OSPEED_2M(GPIOC_TAMPER_RTC))
-/* 0x00000000 */
-#define VAL_GPIOC_PUPDR (PIN_PUDR_FLOATING(GPIOC_AN_CURRENT_SENS) | \
- PIN_PUDR_FLOATING(GPIOC_AN_SUPPLY_SENS) | \
- PIN_PUDR_FLOATING(GPIOC_AN_6V_SENS) | \
- PIN_PUDR_FLOATING(GPIOC_AN33_0) | \
- PIN_PUDR_FLOATING(GPIOC_AN33_1) | \
- PIN_PUDR_FLOATING(GPIOC_AN33_2) | \
- PIN_PUDR_PULLUP(6) | \
- PIN_PUDR_PULLUP(7) | \
- PIN_PUDR_PULLUP(GPIOC_SDIO_D0) | \
- PIN_PUDR_PULLUP(GPIOC_SDIO_D1) | \
- PIN_PUDR_PULLUP(GPIOC_SDIO_D2) | \
- PIN_PUDR_PULLUP(GPIOC_SDIO_D3) | \
- PIN_PUDR_PULLUP(GPIOC_SDIO_CK) | \
- PIN_PUDR_FLOATING(GPIOC_TAMPER_RTC) | \
- PIN_PUDR_FLOATING(GPIOC_OSC32_IN) | \
- PIN_PUDR_FLOATING(GPIOC_OSC32_OUT))
-/* 0x00000000 */
-#define VAL_GPIOC_ODR 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOC_AFRL 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_SDIO_D0, 12) | \
- PIN_AFIO_AF(GPIOC_SDIO_D1, 12) | \
- PIN_AFIO_AF(GPIOC_SDIO_D2, 12) | \
- PIN_AFIO_AF(GPIOC_SDIO_D3, 12) | \
- PIN_AFIO_AF(GPIOC_SDIO_CK, 12))
-
-/*
- * Port D setup.
-#define GPIOD_SDIO_CMD 2
-#define GPIOD_PWM1 12
-#define GPIOD_PWM2 13
-#define GPIOD_PWM3 14
-#define GPIOD_PWM4 15
- */
-/* 0x00000000 */
-#define VAL_GPIOD_MODER (PIN_MODE_ALTERNATE(GPIOD_SDIO_CMD) | \
- PIN_MODE_ALTERNATE(GPIOD_PWM1) | \
- PIN_MODE_ALTERNATE(GPIOD_PWM2) | \
- PIN_MODE_ALTERNATE(GPIOD_PWM3) | \
- PIN_MODE_ALTERNATE(GPIOD_PWM4))
-/* 0x00000000 */
-#define VAL_GPIOD_OTYPER 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_25M(GPIOD_SDIO_CMD))
-/* 0x00000000 */
-#define VAL_GPIOD_PUPDR (PIN_PUDR_PULLUP(GPIOD_SDIO_CMD) | \
- PIN_PUDR_PULLDOWN(GPIOD_PWM1) | \
- PIN_PUDR_PULLDOWN(GPIOD_PWM2) | \
- PIN_PUDR_PULLDOWN(GPIOD_PWM3) | \
- PIN_PUDR_PULLDOWN(GPIOD_PWM4))
-/* 0x00000000 */
-#define VAL_GPIOD_ODR 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_SDIO_CMD, 12))
-/* 0x00000000 */
-#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PWM1, 2) | \
- PIN_AFIO_AF(GPIOD_PWM2, 2) | \
- PIN_AFIO_AF(GPIOD_PWM3, 2) | \
- PIN_AFIO_AF(GPIOD_PWM4, 2))
-
-
-/*
- * Port E setup.
-#define GPIOE_GPS_PPS 0
-#define GPIOE_XBEE_SLEEP 1
-#define GPIOE_XBEE_RESET 2
-#define GPIOE_SDIO_DETECT 3
-#define GPIOE_USB_DISCOVERY 4
-#define GPIOE_GPS_EN 5
-#define GPIOE_BMP085_EOC 6
-#define GPIOE_MAG_INT 7
-#define GPIOE_MMA8451_INT1 8
-#define GPIOE_PWM5 9
-#define GPIOE_ITG3200_INT 10
-#define GPIOE_PWM6 11
-#define GPIOE_TACHOMETER 12
-#define GPIOE_PWM7 13
-#define GPIOE_PWM8 14
-#define GPIOE_MMA8451_INT2 15
- */
-/* 0x00000000 */
-#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_GPS_PPS) | \
- PIN_MODE_OUTPUT(GPIOE_XBEE_SLEEP) | \
- PIN_MODE_OUTPUT(GPIOE_XBEE_RESET) | \
- PIN_MODE_INPUT(GPIOE_SDIO_DETECT) | \
- PIN_MODE_OUTPUT(GPIOE_USB_DISCOVERY) | \
- PIN_MODE_OUTPUT(GPIOE_GPS_PWR_EN) | \
- PIN_MODE_INPUT(GPIOE_BMP085_EOC) | \
- PIN_MODE_INPUT(GPIOE_MAG_INT) | \
- PIN_MODE_INPUT(GPIOE_MMA8451_INT1) | \
- PIN_MODE_ALTERNATE(GPIOE_PWM5) | \
- PIN_MODE_INPUT(GPIOE_ITG3200_INT) | \
- PIN_MODE_ALTERNATE(GPIOE_PWM6) | \
- PIN_MODE_INPUT(12) | \
- PIN_MODE_ALTERNATE(GPIOE_PWM7) | \
- PIN_MODE_ALTERNATE(GPIOE_PWM8) | \
- PIN_MODE_INPUT(GPIOE_MMA8451_INT2))
-/* 0x00000000 */
-#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_XBEE_SLEEP) | \
- PIN_OTYPE_PUSHPULL(GPIOE_XBEE_RESET) | \
- PIN_OTYPE_PUSHPULL(GPIOE_USB_DISCOVERY) | \
- PIN_OTYPE_OPENDRAIN(GPIOE_GPS_PWR_EN) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PWM5) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PWM6) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PWM7) | \
- PIN_OTYPE_PUSHPULL(GPIOE_PWM8))
-/* 0x00000000 */
-#define VAL_GPIOE_OSPEEDR 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOE_PUPDR (PIN_PUDR_PULLDOWN(GPIOE_GPS_PPS) | \
- PIN_PUDR_PULLUP(GPIOE_XBEE_SLEEP) | \
- PIN_PUDR_FLOATING(GPIOE_XBEE_RESET) | \
- PIN_PUDR_PULLUP(GPIOE_SDIO_DETECT) | \
- PIN_PUDR_FLOATING(GPIOE_USB_DISCOVERY) | \
- PIN_PUDR_FLOATING(GPIOE_GPS_PWR_EN) | \
- PIN_PUDR_PULLDOWN(GPIOE_BMP085_EOC) | \
- PIN_PUDR_PULLDOWN(GPIOE_MAG_INT) | \
- PIN_PUDR_PULLDOWN(GPIOE_MMA8451_INT1) | \
- PIN_PUDR_PULLDOWN(GPIOE_PWM5) | \
- PIN_PUDR_PULLDOWN(GPIOE_ITG3200_INT) | \
- PIN_PUDR_PULLDOWN(GPIOE_PWM6) | \
- PIN_PUDR_PULLUP(12) | \
- PIN_PUDR_PULLDOWN(GPIOE_PWM7) | \
- PIN_PUDR_PULLDOWN(GPIOE_PWM8) | \
- PIN_PUDR_PULLDOWN(GPIOE_MMA8451_INT2))
-/* 0x00000000 */
-#define VAL_GPIOE_ODR 0x30
-/* 0x00000000 */
-#define VAL_GPIOE_AFRL 0x00000000
-/* 0x00000000 */
-#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PWM5, 1) | \
- PIN_AFIO_AF(GPIOE_PWM6, 1) | \
- PIN_AFIO_AF(GPIOE_PWM7, 1) | \
- PIN_AFIO_AF(GPIOE_PWM8, 1))
-
-/*
- * Port F setup.
- */
-#define VAL_GPIOF_MODER 0x00000000
-#define VAL_GPIOF_OTYPER 0x00000000
-#define VAL_GPIOF_OSPEEDR 0x00000000
-#define VAL_GPIOF_PUPDR 0x00000000
-#define VAL_GPIOF_ODR 0x00000000
-#define VAL_GPIOF_AFRL 0x00000000
-#define VAL_GPIOF_AFRH 0x00000000
-
-/*
- * Port G setup.
- */
-#define VAL_GPIOG_MODER 0x00000000
-#define VAL_GPIOG_OTYPER 0x00000000
-#define VAL_GPIOG_OSPEEDR 0x00000000
-#define VAL_GPIOG_PUPDR 0x00000000
-#define VAL_GPIOG_ODR 0x00000000
-#define VAL_GPIOG_AFRL 0x00000000
-#define VAL_GPIOG_AFRH 0x00000000
-
-/*
- * Port H setup.
- */
-#define VAL_GPIOH_MODER 0x00000000
-#define VAL_GPIOH_OTYPER 0x00000000
-#define VAL_GPIOH_OSPEEDR 0x00000000
-#define VAL_GPIOH_PUPDR 0x00000000
-#define VAL_GPIOH_ODR 0x00000000
-#define VAL_GPIOH_AFRL 0x00000000
-#define VAL_GPIOH_AFRH 0x00000000
-
-/*
- * Port I setup.
- */
-#define VAL_GPIOI_MODER 0x00000000
-#define VAL_GPIOI_OTYPER 0x00000000
-#define VAL_GPIOI_OSPEEDR 0x00000000
-#define VAL_GPIOI_PUPDR 0x00000000
-#define VAL_GPIOI_ODR 0x00000000
-#define VAL_GPIOI_AFRL 0x00000000
-#define VAL_GPIOI_AFRH 0x00000000
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
|