diff options
| author | Giovanni Di Sirio <gdisirio@gmail.com> | 2017-12-01 08:54:24 +0000 |
|---|---|---|
| committer | Giovanni Di Sirio <gdisirio@gmail.com> | 2017-12-01 08:54:24 +0000 |
| commit | 225b642cde6b56df9ef1860e94546deda5113196 (patch) | |
| tree | d5443f98123502da9c845a336ac803a3c9c725dd /os/hal/boards/GOLDBULL_STM32_F107VC/board.h | |
| parent | 2ebbe6eb870313331bba48884112675107a6b866 (diff) | |
| download | ChibiOS-225b642cde6b56df9ef1860e94546deda5113196.tar.gz ChibiOS-225b642cde6b56df9ef1860e94546deda5113196.tar.bz2 ChibiOS-225b642cde6b56df9ef1860e94546deda5113196.zip | |
Mass update of all board.mk files with new ALLxxx exported variables. Added GOLDBULL_STM32_F107VC board files.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11092 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'os/hal/boards/GOLDBULL_STM32_F107VC/board.h')
| -rw-r--r-- | os/hal/boards/GOLDBULL_STM32_F107VC/board.h | 254 |
1 files changed, 254 insertions, 0 deletions
diff --git a/os/hal/boards/GOLDBULL_STM32_F107VC/board.h b/os/hal/boards/GOLDBULL_STM32_F107VC/board.h new file mode 100644 index 000000000..29e6e269f --- /dev/null +++ b/os/hal/boards/GOLDBULL_STM32_F107VC/board.h @@ -0,0 +1,254 @@ +/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for the GoldBull STM32F107 V3 evaluation board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GOLDBULL_STM32F107VC
+#define BOARD_NAME "GoldBull STM32F107VC V3"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK 32768
+#define STM32_HSECLK 25000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F107xC
+
+/*
+ * Ethernet PHY type.
+ */
+#define BOARD_PHY_ID MII_DP83848I_ID
+#define BOARD_PHY_RMII
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_SWITCH_WKUP 0
+#define GPIOB_SWITCH_USER 2
+#define GPIOC_SWITCH_TAMPER 13
+
+#define GPIOC_SPI3_SD_CS 3
+#define GPIOC_SPI3_SD_CD 2
+
+#define GPIOD_LED3 2
+#define GPIOD_LED4 3
+#define GPIOD_LED5 4
+#define GPIOD_LED6 7
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ * 0 - Analog input.
+ * 1 - Push Pull output 10MHz.
+ * 2 - Push Pull output 2MHz.
+ * 3 - Push Pull output 50MHz.
+ * 4 - Digital input.
+ * 5 - Open Drain output 10MHz.
+ * 6 - Open Drain output 2MHz.
+ * 7 - Open Drain output 50MHz.
+ * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ * 9 - Alternate Push Pull output 10MHz.
+ * A - Alternate Push Pull output 2MHz.
+ * B - Alternate Push Pull output 50MHz.
+ * C - Reserved.
+ * D - Alternate Open Drain output 10MHz.
+ * E - Alternate Open Drain output 2MHz.
+ * F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA0 - Normal input (WKUP BUTTON).
+ * PA1 - Normal input (ETH_RMII_REF_CLK).
+ * PA2 - Alternate output (ETH_RMII_MDIO).
+ * PA3 - Input with PU (TP_IRQ).
+ * PA4 - Push Pull output (TP_CS).
+ * PA5 - Alternate output (SPI1 SCK).
+ * PA6 - Input with PU (SPI1 MISO).
+ * PA7 - Alternate output (SPI1 MOSI).
+ * PA8 - Alternate output (MCO).
+ * PA9 - Normal input (OTG_VBUS).
+ * PA10 - Normal input (OTG_ID).
+ * PA11 - Normal input (OTG_DM).
+ * PA12 - Normal input (OTG_DP).
+ * PA13 - Normal input (TMS).
+ * PA14 - Normal input (TCK).
+ * PA15 - Normal input (TDI).
+ */
+#define VAL_GPIOACRL 0xB8B38B44 /* PA7...PA0 */
+#define VAL_GPIOACRH 0x4444444B /* PA15...PA8 */
+#define VAL_GPIOAODR 0xFFFFFFFF
+
+/*
+ * 0 - Analog input.
+ * 1 - Push Pull output 10MHz.
+ * 2 - Push Pull output 2MHz.
+ * 3 - Push Pull output 50MHz.
+ * 4 - Digital input.
+ * 5 - Open Drain output 10MHz.
+ * 6 - Open Drain output 2MHz.
+ * 7 - Open Drain output 50MHz.
+ * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ * 9 - Alternate Push Pull output 10MHz.
+ * A - Alternate Push Pull output 2MHz.
+ * B - Alternate Push Pull output 50MHz.
+ * C - Reserved.
+ * D - Alternate Open Drain output 10MHz.
+ * E - Alternate Open Drain output 2MHz.
+ * F - Alternate Open Drain output 50MHz.
+ */
+
+/*
+ * Port B setup:
+ * PB0 - Input with PU (unconnected).
+ * PB1 - Input with PU (unconnected).
+ * PB2 - Normal input (BOOT1, KEY_USER).
+ * PB3 - Normal input (TDO).
+ * PB4 - Normal input (TRST).
+ * PB5 - Input with PU (CAN2 RX).
+ * PB6 - Alternate output (USART1 TX, remapped).
+ * PB7 - Input with PU (USART1 RX, remapped).
+ * PB8 - Alternate O.D. (I2C1 SCL, remapped).
+ * PB9 - Alternate O.D. (I2C1 SDA, remapped).
+ * PB10 - Input with PU (BL_CNT).
+ * PB11 - Alternate output (ETH_RMII_TX_EN).
+ * PB12 - Alternate output (ETH_RMII_TXD0).
+ * PB13 - Alternate output (ETH_RMII_TXD1).
+ * PB14 - Input with PU (unconnected).
+ * PB15 - Input with PU (unconnected).
+ */
+#define VAL_GPIOBCRL 0x8B844488 /* PB7...PB0 */
+#define VAL_GPIOBCRH 0x88BBB8FF /* PB15...PB8 */
+#define VAL_GPIOBODR 0xFFFFFFFF
+
+/*
+ * 0 - Analog input.
+ * 1 - Push Pull output 10MHz.
+ * 2 - Push Pull output 2MHz.
+ * 3 - Push Pull output 50MHz.
+ * 4 - Digital input.
+ * 5 - Open Drain output 10MHz.
+ * 6 - Open Drain output 2MHz.
+ * 7 - Open Drain output 50MHz.
+ * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ * 9 - Alternate Push Pull output 10MHz.
+ * A - Alternate Push Pull output 2MHz.
+ * B - Alternate Push Pull output 50MHz.
+ * C - Reserved.
+ * D - Alternate Open Drain output 10MHz.
+ * E - Alternate Open Drain output 2MHz.
+ * F - Alternate Open Drain output 50MHz.
+ */
+
+/*
+ * Port C setup:
+ * PC0 - Analog input (ADC_IN).
+ * PC1 - Alternate output (ETH_MDC).
+ * PC2 - Input with PU (SD_CD).
+ * PC3 - Push Pull output (SD_CS).
+ * PC4 - Push Pull output (OTG_PW_ON).
+ * PC5 - Push Pull output (SF_CS).
+ * PC6 - Push Pull output (LCD_RD).
+ * PC7 - Push Pull output (LCD_WR).
+ * PC8 - Push Pull output (LCD_RS).
+ * PC9 - Push Pull output (LCD_CS).
+ * PC10 - Alternate output (SPI3 SCK).
+ * PC11 - Input with PU (SPI3 MISO).
+ * PC12 - Alternate output (SPI3 MOSI).
+ * PC13 - Normal input (KEY_TAMPER).
+ * PC14 - Normal input (OSC32 IN).
+ * PC15 - Normal input (OSC32 OUT).
+ */
+#define VAL_GPIOCCRL 0x333338B0 /* PC7...PC0 */
+#define VAL_GPIOCCRH 0x444B8B33 /* PC15...PC8 */
+#define VAL_GPIOCODR 0xFFFFFFFF
+
+/*
+ * 0 - Analog input.
+ * 1 - Push Pull output 10MHz.
+ * 2 - Push Pull output 2MHz.
+ * 3 - Push Pull output 50MHz.
+ * 4 - Digital input.
+ * 5 - Open Drain output 10MHz.
+ * 6 - Open Drain output 2MHz.
+ * 7 - Open Drain output 50MHz.
+ * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ * 9 - Alternate Push Pull output 10MHz.
+ * A - Alternate Push Pull output 2MHz.
+ * B - Alternate Push Pull output 50MHz.
+ * C - Reserved.
+ * D - Alternate Open Drain output 10MHz.
+ * E - Alternate Open Drain output 2MHz.
+ * F - Alternate Open Drain output 50MHz.
+ */
+
+/*
+ * Port D setup:
+ * PD0 - Input with PU (CAN1_RX, remapped).
+ * PD1 - Alternate output (CAN1_TX, remapped).
+ * PD2 - Push Pull output (LED3).
+ * PD3 - Push Pull output (LED4).
+ * PD4 - Push Pull output (LED5).
+ * PD5 - Alternate output (USART2 TX, remapped).
+ * PD6 - Input with PU (USART2 RX, remapped).
+ * PD7 - Push Pull output (LED6).
+ * PD8 - Normal input (ETH_RMII_CRS_DV, remapped).
+ * PD9 - Normal input (ETH_RMII_RXD0, remapped).
+ * PD10 - Normal input (ETH_RMII_RXD1, remapped).
+ * PD11 - Input with PU (JOY_UP).
+ * PD12 - Input with PU (JOY_DOWN).
+ * PD13 - Input with PU (JOY_LEFT).
+ * PD14 - Input with PU (JOY_RIGHT).
+ * PD15 - Input with PU (JOY_SEL).
+ */
+#define VAL_GPIODCRL 0x38B333B8 /* PD7...PD0 */
+#define VAL_GPIODCRH 0x88888444 /* PD15...PD8 */
+#define VAL_GPIODODR 0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
+#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
+#define VAL_GPIOEODR 0xFFFFFFFF
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
|