AVR: Update readme.txt files in demos folders.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10724 35acf78f-673a-0410-8e92-d51de3d6d3f4

7 files changed, 21 insertions, 19 deletions

diff --git a/demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt b/demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt
index 882bf35e1..19e3f0020 100644
--- a/demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt
+++ b/demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt
@@ -1,6 +1,6 @@
-******************************************************************************

-** ChibiOS/NIL port for Atmel AVR ATTiny167.                                **

-******************************************************************************

+*****************************************************************************

+** ChibiOS/NIL port for Atmel AVR ATTiny167.                               **

+*****************************************************************************

 

 ** TARGET **

 

@@ -8,9 +8,11 @@ The demo runs on a Digispark Pro board based on an ATtiny167.
 

 ** The Demo **

 

-The demo currently just toggles the test/status LED every second.

-The LED is connected to the PB1 pin of the ATtiny167 MCU.

-This pin corresponds to P1 on the Digispark Pro board.

+A thread is used to print a message to the UART. The UART pins, must be

+connected to an FTDI converter to see the message on a computer. The thread

+also toggles the onboard test/status LED every second, the LED is connected

+to the PB1 pin of the ATtiny167 MCU wich corresponds to P1 on the

+Digispark Pro board.

 

 ** Build Procedure **

 

@@ -18,11 +20,12 @@ The demo was built using the GCC AVR toolchain.
 It should build with WinAVR too!

 Just run the command "make" to build this example.

 

-** Notes **

+** Programming procedure **

 

 The ATtiny167 is pre-programmed with a bootloader.

 Thus it can act as an USB device.

 The Digispark Pro runs the “micronucleus” bootloader.

 This bootloader comes with a command line tool which can be used to

-program the board. Form more details, look at the Makefile or the github at

+program the board.

+Form more details, look at the Makefile or the github repository:

 https://github.com/micronucleus/micronucleus

diff --git a/demos/AVR/RT-ARDUINO-LEONARDO/readme.txt b/demos/AVR/RT-ARDUINO-LEONARDO/readme.txt
index 61cadf4d3..adc7cfa39 100644
--- a/demos/AVR/RT-ARDUINO-LEONARDO/readme.txt
+++ b/demos/AVR/RT-ARDUINO-LEONARDO/readme.txt
@@ -1,5 +1,5 @@
 *****************************************************************************
-** ChibiOS/RT port for Arduino Leonardo.                                   **
+** ChibiOS/RT port for ATmega32u4.                                         **
 *****************************************************************************
 
 ** TARGET **
diff --git a/demos/AVR/RT-ARDUINO-MEGA/readme.txt b/demos/AVR/RT-ARDUINO-MEGA/readme.txt
index 2a1524da7..2c04387ea 100644
--- a/demos/AVR/RT-ARDUINO-MEGA/readme.txt
+++ b/demos/AVR/RT-ARDUINO-MEGA/readme.txt
@@ -1,5 +1,5 @@
 *****************************************************************************

-** ChibiOS/RT port for Atmel AVR ATmega1280.                                **

+** ChibiOS/RT port for Atmel AVR ATmega2560.                               **

 *****************************************************************************

 

 ** TARGET **

diff --git a/demos/AVR/RT-ARDUINO-MINI/readme.txt b/demos/AVR/RT-ARDUINO-MINI/readme.txt
index b0521df3a..3d8f300f5 100644
--- a/demos/AVR/RT-ARDUINO-MINI/readme.txt
+++ b/demos/AVR/RT-ARDUINO-MINI/readme.txt
@@ -15,6 +15,3 @@ on PB5 (pin 13 on Arduino IDE) every second.
 ** Build Procedure **

 

 The demo was built using the GCC AVR toolchain.

-

-** Notes **

-

diff --git a/demos/AVR/RT-ARDUINO-UNO/readme.txt b/demos/AVR/RT-ARDUINO-UNO/readme.txt
index 2a1524da7..f13971018 100644
--- a/demos/AVR/RT-ARDUINO-UNO/readme.txt
+++ b/demos/AVR/RT-ARDUINO-UNO/readme.txt
@@ -1,5 +1,5 @@
 *****************************************************************************

-** ChibiOS/RT port for Atmel AVR ATmega1280.                                **

+** ChibiOS/RT port for Atmel AVR ATmega328p.                               **

 *****************************************************************************

 

 ** TARGET **

diff --git a/demos/AVR/RT-DIGISPARK-ATTINY-167/readme.txt b/demos/AVR/RT-DIGISPARK-ATTINY-167/readme.txt
index f7c62ec09..ed2588695 100644
--- a/demos/AVR/RT-DIGISPARK-ATTINY-167/readme.txt
+++ b/demos/AVR/RT-DIGISPARK-ATTINY-167/readme.txt
@@ -8,9 +8,11 @@ The demo runs on a Digispark Pro board based on an ATtiny167.
 

 ** The Demo **

 

-The demo currently just toggles the test/status LED every second.

-The LED is connected to the PB1 pin of the ATtiny167 MCU.

-This pin corresponds to P1 on the Digispark Pro board.

+A thread is used to print a message to the UART. The UART pins, must be

+connected to an FTDI converter to see the message on a computer. The thread

+also toggles the onboard test/status LED every second, the LED is connected

+to the PB1 pin of the ATtiny167 MCU wich corresponds to P1 on the

+Digispark Pro board.

 

 ** Build Procedure **

 

@@ -18,7 +20,7 @@ The demo was built using the GCC AVR toolchain.
 It should build with WinAVR too!

 Just run the command "make" to build this example.

 

-** Notes **

+** Programming procedure **

 

 The ATtiny167 is pre-programmed with a bootloader.

 Thus it can act as an USB device.

diff --git a/demos/AVR/RT-PRO-MICRO/readme.txt b/demos/AVR/RT-PRO-MICRO/readme.txt
index 6059b90bc..04e2fc01e 100644
--- a/demos/AVR/RT-PRO-MICRO/readme.txt
+++ b/demos/AVR/RT-PRO-MICRO/readme.txt
@@ -1,5 +1,5 @@
 *****************************************************************************
-** ChibiOS/RT port for Sparkfun Pro Micro.                                 **
+** ChibiOS/RT port for ATmega32u4.                                         **
 *****************************************************************************
 
 ** TARGET **