Added board files for Olimex STM32-LCD.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@4937 35acf78f-673a-0410-8e92-d51de3d6d3f4

3 files changed, 297 insertions, 0 deletions

diff --git a/boards/OLIMEX_STM32_LCD/board.c b/boards/OLIMEX_STM32_LCD/board.c
new file mode 100644
index 000000000..c164dc818
--- /dev/null
+++ b/boards/OLIMEX_STM32_LCD/board.c
@@ -0,0 +1,92 @@
+/*

+    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,

+                 2011,2012 Giovanni Di Sirio.

+

+    This file is part of ChibiOS/RT.

+

+    ChibiOS/RT is free software; you can redistribute it and/or modify

+    it under the terms of the GNU General Public License as published by

+    the Free Software Foundation; either version 3 of the License, or

+    (at your option) any later version.

+

+    ChibiOS/RT is distributed in the hope that it will be useful,

+    but WITHOUT ANY WARRANTY; without even the implied warranty of

+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+    GNU General Public License for more details.

+

+    You should have received a copy of the GNU General Public License

+    along with this program.  If not, see <http://www.gnu.org/licenses/>.

+*/

+

+#include "ch.h"

+#include "hal.h"

+

+/**

+ * @brief   PAL setup.

+ * @details Digital I/O ports static configuration as defined in @p board.h.

+ *          This variable is used by the HAL when initializing the PAL driver.

+ */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

+const PALConfig pal_default_config =

+{

+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},

+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},

+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},

+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},

+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},

+  {VAL_GPIOFODR, VAL_GPIOFCRL, VAL_GPIOFCRH},

+  {VAL_GPIOGODR, VAL_GPIOGCRL, VAL_GPIOGCRH},

+};

+#endif

+

+/*

+ * Early initialization code.

+ * This initialization must be performed just after stack setup and before

+ * any other initialization.

+ */

+void __early_init(void) {

+  stm32_clock_init();

+}

+

+#if HAL_USE_SDC || defined(__DOXYGEN__)

+/**

+ * @brief   SDC card detection.

+ */

+bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) {

+  (void)sdcp;

+

+  return TRUE;

+}

+

+/**

+ * @brief   SDC card write protection detection.

+ */

+bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) {

+  (void)sdcp;

+

+  return FALSE;

+}

+#endif /* HAL_USE_SDC */

+

+#if HAL_USE_MMC_SPI

+/* Board-related functions related to the MMC_SPI driver.*/

+bool_t mmc_lld_is_card_inserted(MMCDriver *mmcp) {

+  (void)mmcp;

+

+  return TRUE;

+}

+

+bool_t mmc_lld_is_write_protected(MMCDriver *mmcp) {

+  (void)mmcp;

+

+  return FALSE;

+}

+#endif

+

+/*

+ * Board-specific initialization code.

+ */

+void boardInit(void) {

+

+}

+

diff --git a/boards/OLIMEX_STM32_LCD/board.h b/boards/OLIMEX_STM32_LCD/board.h
new file mode 100644
index 000000000..5dd03f851
--- /dev/null
+++ b/boards/OLIMEX_STM32_LCD/board.h
@@ -0,0 +1,200 @@
+/*

+    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,

+                 2011,2012 Giovanni Di Sirio.

+

+    This file is part of ChibiOS/RT.

+

+    ChibiOS/RT is free software; you can redistribute it and/or modify

+    it under the terms of the GNU General Public License as published by

+    the Free Software Foundation; either version 3 of the License, or

+    (at your option) any later version.

+

+    ChibiOS/RT is distributed in the hope that it will be useful,

+    but WITHOUT ANY WARRANTY; without even the implied warranty of

+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+    GNU General Public License for more details.

+

+    You should have received a copy of the GNU General Public License

+    along with this program.  If not, see <http://www.gnu.org/licenses/>.

+*/

+

+#ifndef _BOARD_H_

+#define _BOARD_H_

+

+/*

+ * Setup for the Olimex STM32-LCD proto board.

+ */

+

+/*

+ * Board identifier.

+ */

+#define BOARD_OLIMEX_STM32_LCD

+#define BOARD_NAME              "Olimex STM32-LCD"

+

+/*

+ * Board frequencies.

+ */

+#define STM32_LSECLK            32768

+#define STM32_HSECLK            8000000

+

+/*

+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.

+ */

+#define STM32F10X_HD

+

+/*

+ * IO pins assignments.

+ */

+#define GPIOA_SPI1NSS           4

+

+#define GPIOB_SPI2NSS           12

+

+#define GPIOA_USB_P             0

+#define GPIOD_USB_DISC          2

+

+#define GPIOE_TFT_RST			2

+#define GPIOD_TFT_LIGHT			13

+#define GPIOC_TFT_YD			0

+#define GPIOC_TFT_YU			1

+#define GPIOC_TFT_XL			2

+#define GPIOC_TFT_XR			3

+

+/*

+ * I/O ports initial setup, this configuration is established soon after reset

+ * in the initialization code.

+ *

+ * The digits have the following meaning:

+ *   0 - Analog input.

+ *   1 - Push Pull output 10MHz.

+ *   2 - Push Pull output 2MHz.

+ *   3 - Push Pull output 50MHz.

+ *   4 - Digital input.

+ *   5 - Open Drain output 10MHz.

+ *   6 - Open Drain output 2MHz.

+ *   7 - Open Drain output 50MHz.

+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.

+ *   9 - Alternate Push Pull output 10MHz.

+ *   A - Alternate Push Pull output 2MHz.

+ *   B - Alternate Push Pull output 50MHz.

+ *   C - Reserved.

+ *   D - Alternate Open Drain output 10MHz.

+ *   E - Alternate Open Drain output 2MHz.

+ *   F - Alternate Open Drain output 50MHz.

+ * Please refer to the STM32 Reference Manual for details.

+ */

+

+/*

+ * Port A setup.

+ * Everything input with pull-up except:

+ * PA0  - Normal input      (USB P).

+ * PA2  - Alternate output  (USART2 TX).

+ * PA3  - Normal input      (USART2 RX).

+ * PA11 - Normal input      (USB DM).

+ * PA12 - Normal input      (USB DP).

+ */

+#define VAL_GPIOACRL            0x88884B84      /*  PA7...PA0 */

+#define VAL_GPIOACRH            0x88844888      /* PA15...PA8 */

+#define VAL_GPIOAODR            0xFFFFFFFF

+

+/*

+ * Port B setup.

+ * Everything input with pull-up except:

+ */

+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */

+#define VAL_GPIOBCRH            0x88888888      /* PB15...PB8 */

+#define VAL_GPIOBODR            0xFFFFFFFF

+

+/*

+ * Port C setup.

+ * Everything input with pull-up except:

+ * PC0  - Analog Input		(TP_YD).

+ * PC1  - Analog Input		(TP_YU).

+ * PC2  - Analog Input		(TP_XL).

+ * PC3  - Analog Input		(TP_XR).

+ * PC8  - Alternate PP 50M	(SD_D0).

+ * PC9  - Alternate PP 50M	(SD_D1).

+ * PC10 - Alternate PP 50M	(SD_D2).

+ * PC11 - Alternate PP 50M	(SD_D3).

+ * PC12 - Alternate PP 50M	(SD_CLK).

+ * PC14 - Normal input		(XTAL).

+ * PC15 - Normal input		(XTAL).

+ */

+#define VAL_GPIOCCRL            0x88880000      /*  PC7...PC0 */

+#define VAL_GPIOCCRH            0x448BBBBB	    /* PC15...PC8 */

+#define VAL_GPIOCODR            0xFFFFFFFF

+

+/*

+ * Port D setup.

+ * Everything input with pull-up except:

+ * PD2  - Alternate PP 50M	(SD_CMD)

+ * PD0  - Alternate PP 50M  (FSMC_D2)

+ * PD1  - Alternate PP 50M  (FSMC_D3)

+ * PD4  - Alternate PP 50M	(TFT_RD)

+ * PD5  - Alternate PP 50M	(TFT_WR)

+ * PD7  - Alternate PP 50M  (TFT_CS)

+ * PD8  - Alternate PP 50M  (FSMC_D13)

+ * PD9  - Alternate PP 50M  (FSMC_D14)

+ * PD10 - Alternate PP 50M  (FSMC_D15)

+ * PD14 - Alternate PP 50M  (FSMC_D0)

+ * PD15 - Alternate PP 50M  (FSMC_D1)

+ */

+#define VAL_GPIODCRL            0xBBBB8BBB      /*  PD7...PD0 */

+#define VAL_GPIODCRH            0xBB388BBB      /* PD15...PD8 */

+#define VAL_GPIODODR            0xFFFFFFFF

+

+/*

+ * Port E setup.

+ * Everything input with pull-up except:

+ * PE2  - Digital Output	(TFT_RST)

+ * PE3  - Alternate PP 50M  (TFT_RS)

+ * PE7  - Alternate PP 50M	(FSMC_D4)

+ * PE8  - Alternate PP 50M  (FSMC_D5)

+ * PE9  - Alternate PP 50M  (FSMC_D6)

+ * PE10 - Alternate PP 50M  (FSMC_D7)

+ * PE11 - Alternate PP 50M  (FSMC_D8)

+ * PE12 - Alternate PP 50M  (FSMC_D9)

+ * PE13 - Alternate PP 50M  (FSMC_D10)

+ * PE14 - Alternate PP 50M  (FSMC_D11)

+ * PE15 - Alternate PP 50M  (FSMC_D12)

+ */

+#define VAL_GPIOECRL            0xB888B388      /*  PE7...PE0 */

+#define VAL_GPIOECRH            0xBBBBBBBB      /* PE15...PE8 */

+#define VAL_GPIOEODR            0xFFFFFFFF

+

+/*

+ * Port F setup.

+ * Everything input with pull-up expect:

+ */

+#define VAL_GPIOFCRL            0x88888888      /*  PF7...PF0 */

+#define VAL_GPIOFCRH            0x88888888      /* PF15...PF8 */

+#define VAL_GPIOFODR            0xFFFFFFFF

+

+/*

+ * Port G setup.

+ * Everything input with pull-up expect:

+ */

+#define VAL_GPIOGCRL            0x88888888      /*  PG7...PG0 */

+#define VAL_GPIOGCRH            0x88888888      /* PG15...PG8 */

+#define VAL_GPIOGODR            0xFFFFFFFF

+

+/*

+ * USB bus activation macro, required by the USB driver.

+ */

+#define usb_lld_connect_bus(usbp) palClearPad(GPIOD, GPIOD_USB_DISC)

+

+/*

+ * USB bus de-activation macro, required by the USB driver.

+ */

+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOD, GPIOD_USB_DISC)

+

+#if !defined(_FROM_ASM_)

+#ifdef __cplusplus

+extern "C" {

+#endif

+  void boardInit(void);

+#ifdef __cplusplus

+}

+#endif

+#endif /* _FROM_ASM_ */

+

+#endif /* _BOARD_H_ */

diff --git a/boards/OLIMEX_STM32_LCD/board.mk b/boards/OLIMEX_STM32_LCD/board.mk
new file mode 100644
index 000000000..c1cc061de
--- /dev/null
+++ b/boards/OLIMEX_STM32_LCD/board.mk
@@ -0,0 +1,5 @@
+# List of all the board related files.

+BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_LCD/board.c

+

+# Required include directories

+BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_LCD