git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126 35acf78f-673a-0410-8e92-d51de3d6d3f4

3 files changed, 0 insertions, 285 deletions

diff --git a/boards/ST_STM3220G_EVAL/board.c b/boards/ST_STM3220G_EVAL/board.c
deleted file mode 100644
index c78a97b8d..000000000
--- a/boards/ST_STM3220G_EVAL/board.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#include "ch.h"

-#include "hal.h"

-

-/**

- * @brief   PAL setup.

- * @details Digital I/O ports static configuration as defined in @p board.h.

- *          This variable is used by the HAL when initializing the PAL driver.

- */

-#if HAL_USE_PAL || defined(__DOXYGEN__)

-const PALConfig pal_default_config =

-{

-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},

-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},

-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},

-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},

-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},

-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},

-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},

-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},

-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}

-};

-#endif

-

-/*

- * Early initialization code.

- * This initialization must be performed just after stack setup and before

- * any other initialization.

- */

-void __early_init(void) {

-

-  stm32_clock_init();

-}

-

-/*

- * Board-specific initialization code.

- */

-void boardInit(void) {

-}

diff --git a/boards/ST_STM3220G_EVAL/board.h b/boards/ST_STM3220G_EVAL/board.h
deleted file mode 100644
index 07cfc5dea..000000000
--- a/boards/ST_STM3220G_EVAL/board.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _BOARD_H_

-#define _BOARD_H_

-

-/*

- * Setup for STMicroelectronics STM3220G-EVAL board.

- */

-

-/*

- * Board identifier.

- */

-#define BOARD_ST_STM3220G_EVAL

-#define BOARD_NAME              "ST STM3220G-EVAL"

-

-/*

- * Board frequencies.

- * NOTE: The HSE crystal is not fitted by default on the board.

- */

-#define STM32_LSECLK            32768

-#define STM32_HSECLK            25000000

-

-/*

- * MCU type as defined in the ST header file stm32f2xx.h.

- */

-#define STM32F2XX

-

-/*

- * IO pins assignments.

- */

-

-#define GPIOA_WAKEUP_BUTTON     0

-

-#define GPIOB_ETHER_INT         14

-#define GPIOB_NAND_INT          15

-

-#define GPIOC_TAMPER_BUTTON     0

-#define GPIOC_LED4              7

-

-#define GPIOF_POT               9

-

-#define GPIOG_LED1              6

-#define GPIOG_LED2              8

-#define GPIOG_USER_BUTTON       15

-

-#define GPIOH_EXPANDER_INT      12

-#define GPIOH_SD_DETECT         13

-

-#define GPIOI_LED3              9

-

-/*

- * I/O ports initial setup, this configuration is established soon after reset

- * in the initialization code.

- * Please refer to the STM32 Reference Manual for details.

- */

-#define PIN_MODE_INPUT(n)           (0 << ((n) * 2))

-#define PIN_MODE_OUTPUT(n)          (1 << ((n) * 2))

-#define PIN_MODE_ALTERNATE(n)       (2 << ((n) * 2))

-#define PIN_MODE_ANALOG(n)          (3 << ((n) * 2))

-#define PIN_OTYPE_PUSHPULL(n)       (0 << (n))

-#define PIN_OTYPE_OPENDRAIN(n)      (1 << (n))

-#define PIN_OSPEED_2M(n)            (0 << ((n) * 2))

-#define PIN_OSPEED_25M(n)           (1 << ((n) * 2))

-#define PIN_OSPEED_50M(n)           (2 << ((n) * 2))

-#define PIN_OSPEED_100M(n)          (3 << ((n) * 2))

-#define PIN_PUDR_FLOATING(n)        (0 << ((n) * 2))

-#define PIN_PUDR_PULLUP(n)          (1 << ((n) * 2))

-#define PIN_PUDR_PULLDOWN(n)        (2 << ((n) * 2))

-#define PIN_AFIO_AF(n, v)           ((v##U) << ((n % 8) * 4))

-

-/*

- * Port A setup.

- * All input with pull-up except:

- * PA8  - MCO 1         (alternate 0).

- * PA13 - JTMS/SWDAT    (alternate 0).

- * PA14 - JTCK/SWCLK    (alternate 0).

- * PA15 - JTDI          (alternate 0).

- */

-#define VAL_GPIOA_MODER             (PIN_MODE_ALTERNATE(8)    | \

-                                     PIN_MODE_ALTERNATE(13)   | \

-                                     PIN_MODE_ALTERNATE(14)   | \

-                                     PIN_MODE_ALTERNATE(15))

-#define VAL_GPIOA_OTYPER            0x00000000

-#define VAL_GPIOA_OSPEEDR           0xFFFFFFFF

-#define VAL_GPIOA_PUPDR             (PIN_PUDR_FLOATING(13)    | \

-                                     PIN_PUDR_FLOATING(14)    | \

-                                     PIN_PUDR_FLOATING(15))

-#define VAL_GPIOA_ODR               0xFFFFFFFF

-#define VAL_GPIOA_AFRL				0x00000000

-#define VAL_GPIOA_AFRH				0x00000000

-

-/*

- * Port B setup.

- * All input with pull-up except:

- * PB3  - JTDO          (alternate 0).

- * PB4  - JNTRST        (alternate 0).

- */

-#define VAL_GPIOB_MODER             (PIN_MODE_ALTERNATE(3)    | \

-                                     PIN_MODE_ALTERNATE(4))

-#define VAL_GPIOB_OTYPER            0x00000000

-#define VAL_GPIOB_OSPEEDR           0xFFFFFFFF

-#define VAL_GPIOB_PUPDR             (~(PIN_PUDR_FLOATING(3)   | \

-                                       PIN_PUDR_FLOATING(4)))

-#define VAL_GPIOB_ODR               0xFFFFFFFF

-#define VAL_GPIOB_AFRL				0x00000000

-#define VAL_GPIOB_AFRH				0x00000000

-

-/*

- * Port C setup.

- * All input with pull-up except:

- * PC9  - MCO2          (alternate 0).

- * PC10 - USART3_TX     (alternate 7).

- * PC11 - USART3_RX     (alternate 7).

- * PC14 - OSC32_INT     (input floating).

- * PC15 - OSC32_OUT     (input floating).

- */

-#define VAL_GPIOC_MODER             (PIN_MODE_ALTERNATE(9)    | \

-                                    PIN_MODE_ALTERNATE(10)    | \

-                                    PIN_MODE_ALTERNATE(11))

-#define VAL_GPIOC_OTYPER            0x00000000

-#define VAL_GPIOC_OSPEEDR           0xFFFFFFFF

-#define VAL_GPIOC_PUPDR             (~(PIN_PUDR_PULLUP(11)    | \

-                                       PIN_PUDR_FLOATING(14)  | \

-                                       PIN_PUDR_FLOATING(15)))

-#define VAL_GPIOC_ODR               0xFFFFFFFF

-#define VAL_GPIOC_AFRL				0x00000000

-#define VAL_GPIOC_AFRH				(PIN_AFIO_AF(7, 10)       | \

-                                     PIN_AFIO_AF(7, 11))

-

-/*

- * Port D setup.

- * All input with pull-up.

- */

-#define VAL_GPIOD_MODER             0x00000000

-#define VAL_GPIOD_OTYPER            0x00000000

-#define VAL_GPIOD_OSPEEDR           0xFFFFFFFF

-#define VAL_GPIOD_PUPDR             0xFFFFFFFF

-#define VAL_GPIOD_ODR               0xFFFFFFFF

-#define VAL_GPIOD_AFRL				0x00000000

-#define VAL_GPIOD_AFRH				0x00000000

-

-/*

- * Port E setup.

- * All input with pull-up.

- */

-#define VAL_GPIOE_MODER             0x00000000

-#define VAL_GPIOE_OTYPER            0x00000000

-#define VAL_GPIOE_OSPEEDR           0xFFFFFFFF

-#define VAL_GPIOE_PUPDR             0xFFFFFFFF

-#define VAL_GPIOE_ODR               0xFFFFFFFF

-#define VAL_GPIOE_AFRL				0x00000000

-#define VAL_GPIOE_AFRH				0x00000000

-

-/*

- * Port F setup.

- * All input with pull-up.

- */

-#define VAL_GPIOF_MODER             0x00000000

-#define VAL_GPIOF_OTYPER            0x00000000

-#define VAL_GPIOF_OSPEEDR           0xFFFFFFFF

-#define VAL_GPIOF_PUPDR             0xFFFFFFFF

-#define VAL_GPIOF_ODR               0xFFFFFFFF

-#define VAL_GPIOF_AFRL				0x00000000

-#define VAL_GPIOF_AFRH				0x00000000

-

-/*

- * Port G setup.

- * All input with pull-up.

- */

-#define VAL_GPIOG_MODER             (PIN_MODE_OUTPUT(GPIOG_LED1))

-#define VAL_GPIOG_OTYPER            0x00000000

-#define VAL_GPIOG_OSPEEDR           0xFFFFFFFF

-#define VAL_GPIOG_PUPDR             (~(PIN_PUDR_FLOATING(GPIOG_LED1)))

-#define VAL_GPIOG_ODR               0xFFFFFFBF

-#define VAL_GPIOG_AFRL				0x00000000

-#define VAL_GPIOG_AFRH				0x00000000

-

-/*

- * Port H setup.

- * All input with pull-up.

- */

-#define VAL_GPIOH_MODER             0x00000000

-#define VAL_GPIOH_OTYPER            0x00000000

-#define VAL_GPIOH_OSPEEDR           0xFFFFFFFF

-#define VAL_GPIOH_PUPDR             0xFFFFFFFF

-#define VAL_GPIOH_ODR               0xFFFFFFFF

-#define VAL_GPIOH_AFRL				0x00000000

-#define VAL_GPIOH_AFRH				0x00000000

-

-/*

- * Port I setup.

- * All input with pull-up.

- */

-#define VAL_GPIOI_MODER             0x00000000

-#define VAL_GPIOI_OTYPER            0x00000000

-#define VAL_GPIOI_OSPEEDR           0xFFFFFFFF

-#define VAL_GPIOI_PUPDR             0xFFFFFFFF

-#define VAL_GPIOI_ODR               0xFFFFFFFF

-#define VAL_GPIOI_AFRL				0x00000000

-#define VAL_GPIOI_AFRH				0x00000000

-

-#if !defined(_FROM_ASM_)

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void boardInit(void);

-#ifdef __cplusplus

-}

-#endif

-#endif /* _FROM_ASM_ */

-

-#endif /* _BOARD_H_ */

diff --git a/boards/ST_STM3220G_EVAL/board.mk b/boards/ST_STM3220G_EVAL/board.mk
deleted file mode 100644
index 3121594a6..000000000
--- a/boards/ST_STM3220G_EVAL/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.

-BOARDSRC = ${CHIBIOS}/boards/ST_STM3220G_EVAL/board.c

-

-# Required include directories

-BOARDINC = ${CHIBIOS}/boards/ST_STM3220G_EVAL