git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@6916 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 0 insertions, 168 deletions

diff --git a/boards/OLIMEX_STM32_103STK/board.h b/boards/OLIMEX_STM32_103STK/board.h
deleted file mode 100644
index df1b832d2..000000000
--- a/boards/OLIMEX_STM32_103STK/board.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _BOARD_H_

-#define _BOARD_H_

-

-/*

- * Setup for the Olimex STM32-103STK proto board.

- */

-

-/*

- * Board identifier.

- */

-#define BOARD_OLIMEX_STM32_103STK

-#define BOARD_NAME              "Olimex STM32-103STK"

-

-/*

- * Board frequencies.

- */

-#define STM32_LSECLK            32768

-#define STM32_HSECLK            8000000

-

-/*

- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.

- */

-#define STM32F10X_MD

-

-/*

- * IO pins assignments.

- */

-#define GPIOA_BUTTON_WAKEUP     0

-#define GPIOC_BUTTON_TAMPER     13

-#define GPIOC_JOY               5

-#define GPIOC_JOY_CENTER_BUT    6

-

-#define GPIOA_SPI1NSS           4

-#define GPIOB_SPI2NSS           12

-

-#define GPIOC_MMCWP             2

-#define GPIOC_MMCCP             1

-

-#define GPIOC_USB_P             4

-#define GPIOC_LCD_RES           7

-#define GPIOC_NRF_CE            8

-#define GPIOC_NRF_IRQ           9

-#define GPIOC_LCD_E             10

-

-#define GPIOC_USB_DISC          11

-#define GPIOC_LED               12

-

-#define GPIOB_ACCEL_IRQ         5

-

-/*

- * I/O ports initial setup, this configuration is established soon after reset

- * in the initialization code.

- *

- * The digits have the following meaning:

- *   0 - Analog input.

- *   1 - Push Pull output 10MHz.

- *   2 - Push Pull output 2MHz.

- *   3 - Push Pull output 50MHz.

- *   4 - Digital input.

- *   5 - Open Drain output 10MHz.

- *   6 - Open Drain output 2MHz.

- *   7 - Open Drain output 50MHz.

- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.

- *   9 - Alternate Push Pull output 10MHz.

- *   A - Alternate Push Pull output 2MHz.

- *   B - Alternate Push Pull output 50MHz.

- *   C - Reserved.

- *   D - Alternate Open Drain output 10MHz.

- *   E - Alternate Open Drain output 2MHz.

- *   F - Alternate Open Drain output 50MHz.

- * Please refer to the STM32 Reference Manual for details.

- */

-

-/*

- * Port A setup.

- * Everything input with pull-up except:

- * PA0  - Normal input      (BUTTON).

- * PA2  - Alternate output  (USART2 TX).

- * PA3  - Normal input      (USART2 RX).

- */

-#define VAL_GPIOACRL            0x88884B84      /*  PA7...PA0 */

-#define VAL_GPIOACRH            0x88888888      /* PA15...PA8 */

-#define VAL_GPIOAODR            0xFFFFFFFF

-

-/*

- * Port B setup.

- * Everything input with pull-up except:

- * PB6,7   - Alternate open drain (I2C1).

- * PB10,11 - Alternate open drain (I2C2).

- * PB12    - Push Pull output  (MMC SPI2 NSS).

- * PB13    - Alternate output  (MMC SPI2 SCK).

- * PB14    - Normal input      (MMC SPI2 MISO).

- * PB15    - Alternate output  (MMC SPI2 MOSI).

- */

-#define VAL_GPIOBCRL            0xEE888888      /*  PB7...PB0 */

-#define VAL_GPIOBCRH            0xB4B3EE88      /* PB15...PB8 */

-#define VAL_GPIOBODR            0xFFFFFFFF

-

-/*

- * Port C setup.

- * Everything input with pull-up except:

- * PC4  - Normal input because there is an external resistor.

- * PC5  - Analog input (joystick).

- * PC6  - Normal input because there is an external resistor.

- * PC7  - Normal input because there is an external resistor.

- * PC10 - Push Pull output (CAN CNTRL).

- * PC11 - Push Pull output (USB DISC).

- * PC12 - Open Drain output (LED).

- */

-#define VAL_GPIOCCRL            0x44048888      /*  PC7...PC0 */

-#define VAL_GPIOCCRH            0x88863388      /* PC15...PC8 */

-#define VAL_GPIOCODR            0xFFFFFFFF

-

-/*

- * Port D setup.

- * Everything input with pull-up except:

- * PD0  - Normal input (XTAL).

- * PD1  - Normal input (XTAL).

- */

-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */

-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */

-#define VAL_GPIODODR            0xFFFFFFFF

-

-/*

- * Port E setup.

- * Everything input with pull-up except:

- */

-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */

-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */

-#define VAL_GPIOEODR            0xFFFFFFFF

-

-/*

- * USB bus activation macro, required by the USB driver.

- */

-#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISC)

-

-/*

- * USB bus de-activation macro, required by the USB driver.

- */

-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISC)

-

-#if !defined(_FROM_ASM_)

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void boardInit(void);

-#ifdef __cplusplus

-}

-#endif

-#endif /* _FROM_ASM_ */

-

-#endif /* _BOARD_H_ */