git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126 35acf78f-673a-0410-8e92-d51de3d6d3f4

3 files changed, 0 insertions, 191 deletions

diff --git a/boards/NGX_BB_LPC11U14/board.c b/boards/NGX_BB_LPC11U14/board.c
deleted file mode 100644
index 3f3c3d726..000000000
--- a/boards/NGX_BB_LPC11U14/board.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#include "ch.h"

-#include "hal.h"

-

-/**

- * @brief   PAL setup.

- * @details Digital I/O ports static configuration as defined in @p board.h.

- *          This variable is used by the HAL when initializing the PAL driver.

- */

-#if HAL_USE_PAL || defined(__DOXYGEN__)

-const PALConfig pal_default_config = {

-  {VAL_GPIO0DATA, VAL_GPIO0DIR},

-  {VAL_GPIO1DATA, VAL_GPIO1DIR}

-};

-#endif

-

-/*

- * Early initialization code.

- * This initialization must be performed just after stack setup and before

- * any other initialization.

- */

-__inline void __early_init(void) {

-

-  lpc_clock_init();

-}

-

-/*

- * Board-specific initialization code.

- */

-__inline void boardInit(void) {

-

-  /* LCD */

-  LPC_IOCON->TMS_PIO0_12  = 0x91;       /* LCD_EN: GPIO - pull-up     */

-  LPC_IOCON->TDO_PIO0_13  = 0x81;       /* LCD_RW: GPIO - No pull-up  */

-  LPC_IOCON->TRST_PIO0_14 = 0x81;       /* LCD_RS: GPIO - No pull-up  */

-

-  /* USART */

-  LPC_IOCON->PIO0_18 = 0x81;            /* RDX: RXD - No pull-up      */

-  LPC_IOCON->PIO0_19 = 0x81;            /* TDX: TXD - No pull-up      */

-

-  /* Test LEDs */

-  LPC_IOCON->PIO0_22 = 0x80;            /* LED_TEST1: GPIO - No pull-up */

-  LPC_IOCON->PIO0_23 = 0x80;            /* LED_TEST2: GPIO - No pull-up */

-

-}

-

diff --git a/boards/NGX_BB_LPC11U14/board.h b/boards/NGX_BB_LPC11U14/board.h
deleted file mode 100644
index 9a59a9c44..000000000
--- a/boards/NGX_BB_LPC11U14/board.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _BOARD_H_

-#define _BOARD_H_

-

-/*

- * Setup for NGX BlueBoard LPC11U14.

- */

-

-/*

- * Board identifiers.

- */

-#define BOARD_NGX_BB_LPC11U14

-#define BOARD_NAME "NGX BlueBoard LPC11U14"

-

-/*

- * Board frequencies.

- */

-#define SYSOSCCLK               12000000

-

-/*

- * Pin definitions.

- */

- 

-/* GPIO Port0 */

-#define BUTTON_ISP_PORT       GPIO0

-#define BUTTON_ISP            1

-

-#define LCD_ERD_PORT          GPIO0

-#define LCD_ERD               12

-

-#define LCD_RWR_PORT          GPIO0

-#define LCD_RWR               13

-

-#define LCD_RS_PORT           GPIO0

-#define LCD_RS                14

-

-#define LED_PORT              GPIO0

-#define LED_TEST1             22

-#define LED_TEST2             23

-

-/* GPIO Port1 */

-#define LCD_RST_PORT          GPIO1

-#define LCD_RST               0

-

-#define LCD_CS_PORT           GPIO1

-#define LCD_CS                13

-

-#define LCD_BL_PORT           GPIO1

-#define LCD_BL                14

-#define LCD_VCCEN_PORT        GPIO1

-#define LCD_VCCEN             14

-

-#define WHEEL_SENSOR_PORT     GPIO0

-#define WHEEL_SENSOR          21

-

-#define LCD_DATA_PORT         GPIO1

-#define LCD_D0                19

-#define LCD_D1                20

-#define LCD_D2                21

-#define LCD_D3                22

-#define LCD_D4                26

-#define LCD_D5                27

-#define LCD_D6                28

-#define LCD_D7                31

-

-#define LCD_DATA_MASK           PAL_PORT_BIT(LCD_D0)  | \

-                                PAL_PORT_BIT(LCD_D1)  | \

-                                PAL_PORT_BIT(LCD_D2)  | \

-                                PAL_PORT_BIT(LCD_D3)  | \

-                                PAL_PORT_BIT(LCD_D4)  | \

-                                PAL_PORT_BIT(LCD_D5)  | \

-                                PAL_PORT_BIT(LCD_D6)  | \

-                                PAL_PORT_BIT(LCD_D7)

-

-/*

- * GPIO 0 initial setup.

- */

-#define VAL_GPIO0DIR            PAL_PORT_BIT(LCD_ERD)   | \

-                                PAL_PORT_BIT(LCD_RWR)   | \

-                                PAL_PORT_BIT(LCD_RS)    | \

-                                PAL_PORT_BIT(LED_TEST1) | \

-                                PAL_PORT_BIT(LED_TEST2)

-                                

-#define VAL_GPIO0DATA           PAL_PORT_BIT(LCD_ERD)   | \

-                                PAL_PORT_BIT(LCD_RWR)   | \

-                                PAL_PORT_BIT(LED_TEST1) | \

-                                PAL_PORT_BIT(LED_TEST2)

-

-/*

- * GPIO 1 initial setup.

- */

-#define VAL_GPIO1DIR            PAL_PORT_BIT(LCD_RST) | \

-                                PAL_PORT_BIT(LCD_CS)  | \

-                                PAL_PORT_BIT(LCD_BL)  | \

-                                LCD_DATA_MASK

-                                

-#define VAL_GPIO1DATA           0x00000000

-

-

-#if !defined(_FROM_ASM_)

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void boardInit(void);

-#ifdef __cplusplus

-}

-#endif

-#endif

-

-#endif

diff --git a/boards/NGX_BB_LPC11U14/board.mk b/boards/NGX_BB_LPC11U14/board.mk
deleted file mode 100644
index 451d160dd..000000000
--- a/boards/NGX_BB_LPC11U14/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.

-BOARDSRC = ${CHIBIOS}/boards/NGX_BB_LPC11U14/board.c

-

-# Required include directories

-BOARDINC = ${CHIBIOS}/boards/NGX_BB_LPC11U14