diff options
| author | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2013-06-15 15:58:20 +0000 |
|---|---|---|
| committer | gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4> | 2013-06-15 15:58:20 +0000 |
| commit | 7c68ef157d009f9932ac47ba21ba5d74e321623f (patch) | |
| tree | 6c2442ca44cd090656ec3059ffb959f3d747e18d /boards/MAPLEMINI_STM32_F103/board.h | |
| parent | 076746af63d317f8e96766b9137a65679f60463f (diff) | |
| parent | e0d850113610f3efa0c0ac4946901f683e5e7332 (diff) | |
| download | ChibiOS-7c68ef157d009f9932ac47ba21ba5d74e321623f.tar.gz ChibiOS-7c68ef157d009f9932ac47ba21ba5d74e321623f.tar.bz2 ChibiOS-7c68ef157d009f9932ac47ba21ba5d74e321623f.zip | |
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@5854 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'boards/MAPLEMINI_STM32_F103/board.h')
| -rw-r--r-- | boards/MAPLEMINI_STM32_F103/board.h | 137 |
1 files changed, 137 insertions, 0 deletions
diff --git a/boards/MAPLEMINI_STM32_F103/board.h b/boards/MAPLEMINI_STM32_F103/board.h new file mode 100644 index 000000000..977a54bb7 --- /dev/null +++ b/boards/MAPLEMINI_STM32_F103/board.h @@ -0,0 +1,137 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for the LeafLabs Maple Mini.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_MAPLEMINI_STM32_F103
+#define BOARD_NAME "LeafLabs Maple Mini"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK 32768
+#define STM32_HSECLK 8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F10X_MD
+
+/*
+ * IO pins assignments.
+ */
+/* Missing.*/
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ * 0 - Analog input.
+ * 1 - Push Pull output 10MHz.
+ * 2 - Push Pull output 2MHz.
+ * 3 - Push Pull output 50MHz.
+ * 4 - Digital input.
+ * 5 - Open Drain output 10MHz.
+ * 6 - Open Drain output 2MHz.
+ * 7 - Open Drain output 50MHz.
+ * 8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ * 9 - Alternate Push Pull output 10MHz.
+ * A - Alternate Push Pull output 2MHz.
+ * B - Alternate Push Pull output 50MHz.
+ * C - Reserved.
+ * D - Alternate Open Drain output 10MHz.
+ * E - Alternate Open Drain output 2MHz.
+ * F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA2 - Alternate output (USART2 TX).
+ * PA3 - Normal input (USART2 RX).
+ * PA9 - Alternate output (USART1 TX).
+ * PA10 - Normal input (USART1 RX).
+ */
+#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
+#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
+#define VAL_GPIOAODR 0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB1 - Push Pull output (LED).
+ */
+#define VAL_GPIOBCRL 0x88888838 /* PB7...PB0 */
+#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
+#define VAL_GPIOBODR 0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
+#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */
+#define VAL_GPIOCODR 0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0 - Normal input (XTAL).
+ * PD1 - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
+#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
+#define VAL_GPIODODR 0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
+#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
+#define VAL_GPIOEODR 0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISC)
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISC)
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
|