git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126 35acf78f-673a-0410-8e92-d51de3d6d3f4

3 files changed, 0 insertions, 155 deletions

diff --git a/boards/EA_LPCXPRESSO_BB_1343/board.c b/boards/EA_LPCXPRESSO_BB_1343/board.c
deleted file mode 100644
index d25d93d20..000000000
--- a/boards/EA_LPCXPRESSO_BB_1343/board.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#include "ch.h"

-#include "hal.h"

-

-/**

- * @brief   PAL setup.

- * @details Digital I/O ports static configuration as defined in @p board.h.

- *          This variable is used by the HAL when initializing the PAL driver.

- */

-#if HAL_USE_PAL || defined(__DOXYGEN__)

-const PALConfig pal_default_config = {

- {VAL_GPIO0DATA, VAL_GPIO0DIR},

- {VAL_GPIO1DATA, VAL_GPIO1DIR},

- {VAL_GPIO2DATA, VAL_GPIO2DIR},

- {VAL_GPIO3DATA, VAL_GPIO3DIR},

-};

-#endif

-

-/*

- * Early initialization code.

- * This initialization must be performed just after stack setup and before

- * any other initialization.

- */

-void __early_init(void) {

-

-  LPC13xx_clock_init();

-}

-

-/*

- * Board-specific initialization code.

- */

-void boardInit(void) {

-

-  /*

-   * Extra, board-specific, initializations.

-   * NOTE: PIO1_2 is associated also to the JTAG, if you need to use JTAG

-   *       you must comment that line first.

-   */

-  LPC_IOCON->PIO0_7 = 0xC0;             /* Disables pull-up on LED2 output. */

-  LPC_IOCON->R_PIO1_2 = 0xC1;           /* Disables pull-up on LED3B output

-                                           and makes it GPIO1_2.            */

-  LPC_IOCON->PIO1_9 = 0xC0;             /* Disables pull-up on LED3R output.*/

-  LPC_IOCON->PIO1_10 = 0xC0;            /* Disables pull-up on LED3G output.*/

-}

diff --git a/boards/EA_LPCXPRESSO_BB_1343/board.h b/boards/EA_LPCXPRESSO_BB_1343/board.h
deleted file mode 100644
index b5ad73dbd..000000000
--- a/boards/EA_LPCXPRESSO_BB_1343/board.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _BOARD_H_

-#define _BOARD_H_

-

-/*

- * Setup for Embedded Artists LPCXpresso Base Board with LPC1343 daughter

- * board.

- */

-

-/*

- * Board identifiers.

- */

-#define BOARD_EA_BB_LPC1343

-#define BOARD_NAME "Embedded Artists LPCXpresso Base Board + LPC1343"

-

-/*

- * Board frequencies.

- */

-#define SYSOSCCLK               12000000

-

-/*

- * GPIO 0 initial setup.

- */

-#define VAL_GPIO0DIR            PAL_PORT_BIT(GPIO0_OLEDSEL) |               \

-                                PAL_PORT_BIT(GPIO0_LED2)

-#define VAL_GPIO0DATA           PAL_PORT_BIT(GPIO0_OLEDSEL) |               \

-                                PAL_PORT_BIT(GPIO0_LED2)

-

-/*

- * GPIO 1 initial setup.

- */

-#define VAL_GPIO1DIR            PAL_PORT_BIT(GPIO1_LED3B)   |               \

-                                PAL_PORT_BIT(GPIO1_LED3R)   |               \

-                                PAL_PORT_BIT(GPIO1_LED3G)   |               \

-                                PAL_PORT_BIT(GPIO1_SPI0SEL)

-#define VAL_GPIO1DATA           PAL_PORT_BIT(GPIO1_LED3B)   |               \

-                                PAL_PORT_BIT(GPIO1_LED3R)   |               \

-                                PAL_PORT_BIT(GPIO1_LED3G)   |               \

-                                PAL_PORT_BIT(GPIO1_SPI0SEL)

-

-/*

- * GPIO 2 initial setup.

- */

-#define VAL_GPIO2DIR            0x00000000

-#define VAL_GPIO2DATA           0x00000000

-

-/*

- * GPIO 3 initial setup.

- */

-#define VAL_GPIO3DIR            0x00000000

-#define VAL_GPIO3DATA           0x00000000

-

-/*

- * Pin definitions.

- */

-#define GPIO0_SW3               1

-#define GPIO0_OLEDSEL           2

-#define GPIO0_LED2              7

-

-#define GPIO1_LED3B             2

-#define GPIO1_SW4               4

-#define GPIO1_LED3R             9

-#define GPIO1_LED3G             10

-#define GPIO1_SPI0SEL           11

-

-#if !defined(_FROM_ASM_)

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void boardInit(void);

-#ifdef __cplusplus

-}

-#endif

-#endif /* _FROM_ASM_ */

-

-#endif /* _BOARD_H_ */

diff --git a/boards/EA_LPCXPRESSO_BB_1343/board.mk b/boards/EA_LPCXPRESSO_BB_1343/board.mk
deleted file mode 100644
index da59e98c4..000000000
--- a/boards/EA_LPCXPRESSO_BB_1343/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.

-BOARDSRC = ${CHIBIOS}/boards/EA_LPCXPRESSO_BB_1343/board.c

-

-# Required include directories

-BOARDINC = ${CHIBIOS}/boards/EA_LPCXPRESSO_BB_1343