Add ICU HAL test for AVR

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@5941 35acf78f-673a-0410-8e92-d51de3d6d3f4

6 files changed, 1697 insertions, 0 deletions

diff --git a/testhal/AVR/ICU/Makefile b/testhal/AVR/ICU/Makefile
new file mode 100644
index 000000000..5f5bfb71f
--- /dev/null
+++ b/testhal/AVR/ICU/Makefile
@@ -0,0 +1,630 @@
+# Hey Emacs, this is a -*- makefile -*-

+#----------------------------------------------------------------------------

+# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.

+#

+# Released to the Public Domain

+#

+# Additional material for this makefile was written by:

+# Peter Fleury

+# Tim Henigan

+# Colin O'Flynn

+# Reiner Patommel

+# Markus Pfaff

+# Sander Pool

+# Frederik Rouleau

+# Carlos Lamas

+#

+#----------------------------------------------------------------------------

+# On command line:

+#

+# make all = Make software.

+#

+# make clean = Clean out built project files.

+#

+# make coff = Convert ELF to AVR COFF.

+#

+# make extcoff = Convert ELF to AVR Extended COFF.

+#

+# make program = Download the hex file to the device, using avrdude.

+#                Please customize the avrdude settings below first!

+#

+# make debug = Start either simulavr or avarice as specified for debugging,

+#              with avr-gdb or avr-insight as the front end for debugging.

+#

+# make filename.s = Just compile filename.c into the assembler code only.

+#

+# make filename.i = Create a preprocessed source file for use in submitting

+#                   bug reports to the GCC project.

+#

+# To rebuild project do "make clean" then "make all".

+#----------------------------------------------------------------------------

+

+

+# MCU name

+MCU = atmega1280

+

+

+# Processor frequency.

+F_CPU = 16000000

+

+

+# Output format. (can be srec, ihex, binary)

+FORMAT = ihex

+

+

+# Target file name (without extension).

+TARGET = ch

+

+

+# Object files directory

+#     To put object files in current directory, use a dot (.), do NOT make

+#     this an empty or blank macro!

+OBJDIR = .

+

+

+# Imported source files

+CHIBIOS = ../../..

+include $(CHIBIOS)/boards/ARDUINO_MEGA/board.mk

+include $(CHIBIOS)/os/hal/platforms/AVR/platform.mk

+include $(CHIBIOS)/os/hal/hal.mk

+include $(CHIBIOS)/os/ports/GCC/AVR/port.mk

+include $(CHIBIOS)/os/kernel/kernel.mk

+#include $(CHIBIOS)/test/test.mk

+

+# List C source files here. (C dependencies are automatically generated.)

+SRC = $(PORTSRC) \

+      $(KERNSRC) \

+      $(TESTSRC) \

+      $(HALSRC) \

+      $(PLATFORMSRC) \

+      $(BOARDSRC) \

+      $(CHIBIOS)/os/various/evtimer.c \

+      $(CHIBIOS)/os/various/chprintf.c \

+      main.c

+

+

+# List C++ source files here. (C dependencies are automatically generated.)

+CPPSRC =

+

+

+# List Assembler source files here.

+#     Make them always end in a capital .S.  Files ending in a lowercase .s

+#     will not be considered source files but generated files (assembler

+#     output from the compiler), and will be deleted upon "make clean"!

+#     Even though the DOS/Win* filesystem matches both .s and .S the same,

+#     it will preserve the spelling of the filenames, and gcc itself does

+#     care about how the name is spelled on its command-line.

+ASRC =

+

+

+# Optimization level, can be [0, 1, 2, 3, s].

+#     0 = turn off optimization. s = optimize for size.

+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

+OPT = 2

+

+

+# Debugging format.

+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.

+#     AVR Studio 4.10 requires dwarf-2.

+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.

+DEBUG = dwarf-2

+

+

+# List any extra directories to look for include files here.

+#     Each directory must be seperated by a space.

+#     Use forward slashes for directory separators.

+#     For a directory that has spaces, enclose it in quotes.

+EXTRAINCDIRS = $(PORTINC) $(KERNINC) $(TESTINC) \

+               $(HALINC) $(PLATFORMINC) $(BOARDINC) \

+               $(CHIBIOS)/os/various

+

+

+# Compiler flag to set the C Standard level.

+#     c89   = "ANSI" C

+#     gnu89 = c89 plus GCC extensions

+#     c99   = ISO C99 standard (not yet fully implemented)

+#     gnu99 = c99 plus GCC extensions

+CSTANDARD = -std=gnu99

+

+

+# Place -D or -U options here for C sources

+CDEFS = -DF_CPU=$(F_CPU)UL

+

+

+# Place -D or -U options here for ASM sources

+ADEFS = -DF_CPU=$(F_CPU)

+

+

+# Place -D or -U options here for C++ sources

+CPPDEFS = -DF_CPU=$(F_CPU)UL

+#CPPDEFS += -D__STDC_LIMIT_MACROS

+#CPPDEFS += -D__STDC_CONSTANT_MACROS

+

+

+

+#---------------- Compiler Options C ----------------

+#  -g*:          generate debugging information

+#  -O*:          optimization level

+#  -f...:        tuning, see GCC manual and avr-libc documentation

+#  -Wall...:     warning level

+#  -Wa,...:      tell GCC to pass this to the assembler.

+#    -adhlns...: create assembler listing

+CFLAGS = -g$(DEBUG)

+CFLAGS += $(CDEFS)

+CFLAGS += -O$(OPT)

+CFLAGS += -funsigned-char

+CFLAGS += -funsigned-bitfields

+CFLAGS += -fpack-struct

+CFLAGS += -fshort-enums

+#CFLAGS += -fno-strict-aliasing

+CFLAGS += -Wall

+CFLAGS += -Wstrict-prototypes

+#CFLAGS += -mshort-calls

+#CFLAGS += -fno-unit-at-a-time

+#CFLAGS += -Wundef

+#CFLAGS += -Wunreachable-code

+#CFLAGS += -Wsign-compare

+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

+CFLAGS += $(CSTANDARD)

+

+

+#---------------- Compiler Options C++ ----------------

+#  -g*:          generate debugging information

+#  -O*:          optimization level

+#  -f...:        tuning, see GCC manual and avr-libc documentation

+#  -Wall...:     warning level

+#  -Wa,...:      tell GCC to pass this to the assembler.

+#    -adhlns...: create assembler listing

+CPPFLAGS = -g$(DEBUG)

+CPPFLAGS += $(CPPDEFS)

+CPPFLAGS += -O$(OPT)

+CPPFLAGS += -funsigned-char

+CPPFLAGS += -funsigned-bitfields

+CPPFLAGS += -fpack-struct

+CPPFLAGS += -fshort-enums

+CPPFLAGS += -fno-exceptions

+CPPFLAGS += -Wall

+CFLAGS += -Wundef

+#CPPFLAGS += -mshort-calls

+#CPPFLAGS += -fno-unit-at-a-time

+#CPPFLAGS += -Wstrict-prototypes

+#CPPFLAGS += -Wunreachable-code

+#CPPFLAGS += -Wsign-compare

+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

+#CPPFLAGS += $(CSTANDARD)

+

+

+#---------------- Assembler Options ----------------

+#  -Wa,...:   tell GCC to pass this to the assembler.

+#  -adhlns:   create listing

+#  -gstabs:   have the assembler create line number information; note that

+#             for use in COFF files, additional information about filenames

+#             and function names needs to be present in the assembler source

+#             files -- see avr-libc docs [FIXME: not yet described there]

+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex

+#       dump that will be displayed for a given single line of source input.

+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

+

+

+#---------------- Library Options ----------------

+# Minimalistic printf version

+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min

+

+# Floating point printf version (requires MATH_LIB = -lm below)

+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt

+

+# If this is left blank, then it will use the Standard printf version.

+PRINTF_LIB = $(PRINTF_LIB_MIN)

+#PRINTF_LIB = $(PRINTF_LIB_MIN)

+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)

+

+

+# Minimalistic scanf version

+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min

+

+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)

+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt

+

+# If this is left blank, then it will use the Standard scanf version.

+SCANF_LIB = $(SCANF_LIB_MIN)

+#SCANF_LIB = $(SCANF_LIB_MIN)

+#SCANF_LIB = $(SCANF_LIB_FLOAT)

+

+

+MATH_LIB = -lm

+

+

+# List any extra directories to look for libraries here.

+#     Each directory must be seperated by a space.

+#     Use forward slashes for directory separators.

+#     For a directory that has spaces, enclose it in quotes.

+EXTRALIBDIRS =

+

+

+

+#---------------- External Memory Options ----------------

+

+# 64 KB of external RAM, starting after internal RAM (ATmega128!),

+# used for variables (.data/.bss) and heap (malloc()).

+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff

+

+# 64 KB of external RAM, starting after internal RAM (ATmega128!),

+# only used for heap (malloc()).

+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff

+

+EXTMEMOPTS =

+

+

+

+#---------------- Linker Options ----------------

+#  -Wl,...:     tell GCC to pass this to linker.

+#    -Map:      create map file

+#    --cref:    add cross reference to  map file

+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref

+LDFLAGS += $(EXTMEMOPTS)

+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

+#LDFLAGS += -T linker_script.x

+

+

+

+#---------------- Programming Options (avrdude) ----------------

+

+# Programming hardware: alf avr910 avrisp bascom bsd

+# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500

+#

+# Type: avrdude -c ?

+# to get a full listing.

+#

+AVRDUDE_PROGRAMMER = arduino

+

+# com1 = serial port. Use lpt1 to connect to parallel port.

+AVRDUDE_PORT = /dev/ttyUSB0    # programmer connected to serial device

+

+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex

+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep

+

+

+# Uncomment the following if you want avrdude's erase cycle counter.

+# Note that this counter needs to be initialized first using -Yn,

+# see avrdude manual.

+#AVRDUDE_ERASE_COUNTER = -y

+

+# Uncomment the following if you do /not/ wish a verification to be

+# performed after programming the device.

+#AVRDUDE_NO_VERIFY = -V

+

+# Increase verbosity level.  Please use this when submitting bug

+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>

+# to submit bug reports.

+#AVRDUDE_VERBOSE = -v -v

+

+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)

+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)

+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)

+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)

+AVRDUDE_FLAGS += -b 57600

+

+

+#---------------- Debugging Options ----------------

+

+# For simulavr only - target MCU frequency.

+DEBUG_MFREQ = $(F_CPU)

+

+# Set the DEBUG_UI to either gdb or insight.

+# DEBUG_UI = gdb

+DEBUG_UI = insight

+

+# Set the debugging back-end to either avarice, simulavr.

+DEBUG_BACKEND = avarice

+#DEBUG_BACKEND = simulavr

+

+# GDB Init Filename.

+GDBINIT_FILE = __avr_gdbinit

+

+# When using avarice settings for the JTAG

+JTAG_DEV = /dev/com1

+

+# Debugging port used to communicate between GDB / avarice / simulavr.

+DEBUG_PORT = 4242

+

+# Debugging host used to communicate between GDB / avarice / simulavr, normally

+#     just set to localhost unless doing some sort of crazy debugging when

+#     avarice is running on a different computer.

+DEBUG_HOST = localhost

+

+

+

+#============================================================================

+

+

+# Define programs and commands.

+SHELL = sh

+CC = avr-gcc

+OBJCOPY = avr-objcopy

+OBJDUMP = avr-objdump

+SIZE = avr-size

+AR = avr-ar rcs

+NM = avr-nm

+AVRDUDE = avrdude

+REMOVE = rm -f

+REMOVEDIR = rm -rf

+COPY = cp

+WINSHELL = cmd

+

+

+# Define Messages

+# English

+MSG_ERRORS_NONE = Errors: none

+MSG_BEGIN = -------- begin --------

+MSG_END = --------  end  --------

+MSG_SIZE_BEFORE = Size before:

+MSG_SIZE_AFTER = Size after:

+MSG_COFF = Converting to AVR COFF:

+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:

+MSG_FLASH = Creating load file for Flash:

+MSG_EEPROM = Creating load file for EEPROM:

+MSG_EXTENDED_LISTING = Creating Extended Listing:

+MSG_SYMBOL_TABLE = Creating Symbol Table:

+MSG_LINKING = Linking:

+MSG_COMPILING = Compiling C:

+MSG_COMPILING_CPP = Compiling C++:

+MSG_ASSEMBLING = Assembling:

+MSG_CLEANING = Cleaning project:

+MSG_CREATING_LIBRARY = Creating library:

+

+

+

+

+# Define all object files.

+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

+

+# Define all listing files.

+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

+

+

+# Compiler flags to generate dependency files.

+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d

+

+

+# Combine all necessary flags and optional flags.

+# Add target processor to flags.

+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)

+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)

+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)

+

+

+

+

+

+# Default target.

+all: begin gccversion sizebefore build sizeafter end

+

+# Change the build target to build a HEX file or a library.

+build: elf hex bin eep lss sym

+#build: lib

+

+

+elf: $(TARGET).elf

+hex: $(TARGET).hex

+bin: $(TARGET).bin

+eep: $(TARGET).eep

+lss: $(TARGET).lss

+sym: $(TARGET).sym

+LIBNAME=lib$(TARGET).a

+lib: $(LIBNAME)

+

+

+

+# Eye candy.

+# AVR Studio 3.x does not check make's exit code but relies on

+# the following magic strings to be generated by the compile job.

+begin:

+	@echo

+	@echo $(MSG_BEGIN)

+

+end:

+	@echo $(MSG_END)

+	@echo

+

+

+# Display size of file.

+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex

+ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf

+

+sizebefore:

+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \

+	2>/dev/null; echo; fi

+

+sizeafter:

+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

+	2>/dev/null; echo; fi

+

+

+

+# Display compiler version information.

+gccversion :

+	@$(CC) --version

+

+

+

+# Program the device.

+program: $(TARGET).hex $(TARGET).eep

+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

+

+

+# Generate avr-gdb config/init file which does the following:

+#     define the reset signal, load the target file, connect to target, and set

+#     a breakpoint at main().

+gdb-config:

+	@$(REMOVE) $(GDBINIT_FILE)

+	@echo define reset >> $(GDBINIT_FILE)

+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)

+	@echo end >> $(GDBINIT_FILE)

+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)

+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)

+ifeq ($(DEBUG_BACKEND),simulavr)

+	@echo load  >> $(GDBINIT_FILE)

+endif

+	@echo break main >> $(GDBINIT_FILE)

+

+debug: gdb-config $(TARGET).elf

+ifeq ($(DEBUG_BACKEND), avarice)

+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.

+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \

+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)

+	@$(WINSHELL) /c pause

+

+else

+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \

+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)

+endif

+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)

+

+

+

+

+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.

+COFFCONVERT = $(OBJCOPY) --debugging

+COFFCONVERT += --change-section-address .data-0x800000

+COFFCONVERT += --change-section-address .bss-0x800000

+COFFCONVERT += --change-section-address .noinit-0x800000

+COFFCONVERT += --change-section-address .eeprom-0x810000

+

+

+

+coff: $(TARGET).elf

+	@echo

+	@echo $(MSG_COFF) $(TARGET).cof

+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof

+

+

+extcoff: $(TARGET).elf

+	@echo

+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof

+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof

+

+

+

+# Create final output files (.hex, .eep) from ELF output file.

+%.hex: %.elf

+	@echo

+	@echo $(MSG_FLASH) $@

+	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@

+

+%.bin: %.elf

+	@echo

+	@echo $(MSG_FLASH) $@

+	$(OBJCOPY) -O binary -R .eeprom $< $@

+

+%.eep: %.elf

+	@echo

+	@echo $(MSG_EEPROM) $@

+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \

+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0

+

+# Create extended listing file from ELF output file.

+%.lss: %.elf

+	@echo

+	@echo $(MSG_EXTENDED_LISTING) $@

+	$(OBJDUMP) -h -S $< > $@

+

+# Create a symbol table from ELF output file.

+%.sym: %.elf

+	@echo

+	@echo $(MSG_SYMBOL_TABLE) $@

+	$(NM) -n $< > $@

+

+

+

+# Create library from object files.

+.SECONDARY : $(TARGET).a

+.PRECIOUS : $(OBJ)

+%.a: $(OBJ)

+	@echo

+	@echo $(MSG_CREATING_LIBRARY) $@

+	$(AR) $@ $(OBJ)

+

+

+# Link: create ELF output file from object files.

+.SECONDARY : $(TARGET).elf

+.PRECIOUS : $(OBJ)

+%.elf: $(OBJ)

+	@echo

+	@echo $(MSG_LINKING) $@

+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)

+

+

+# Compile: create object files from C source files.

+$(OBJDIR)/%.o : %.c

+	@echo

+	@echo $(MSG_COMPILING) $<

+	$(CC) -c $(ALL_CFLAGS) $< -o $@

+

+

+# Compile: create object files from C++ source files.

+$(OBJDIR)/%.o : %.cpp

+	@echo

+	@echo $(MSG_COMPILING_CPP) $<

+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@

+

+

+# Compile: create assembler files from C source files.

+%.s : %.c

+	$(CC) -S $(ALL_CFLAGS) $< -o $@

+

+

+# Compile: create assembler files from C++ source files.

+%.s : %.cpp

+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@

+

+

+# Assemble: create object files from assembler source files.

+$(OBJDIR)/%.o : %.S

+	@echo

+	@echo $(MSG_ASSEMBLING) $<

+	$(CC) -c $(ALL_ASFLAGS) $< -o $@

+

+

+# Create preprocessed source for use in sending a bug report.

+%.i : %.c

+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@

+

+

+# Target: clean project.

+clean: begin clean_list end

+

+clean_list :

+	@echo

+	@echo $(MSG_CLEANING)

+	$(REMOVE) $(TARGET).hex

+	$(REMOVE) $(TARGET).bin

+	$(REMOVE) $(TARGET).eep

+	$(REMOVE) $(TARGET).cof

+	$(REMOVE) $(TARGET).elf

+	$(REMOVE) $(TARGET).map

+	$(REMOVE) $(TARGET).sym

+	$(REMOVE) $(TARGET).lss

+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)

+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)

+	$(REMOVE) $(SRC:.c=.s)

+	$(REMOVE) $(SRC:.c=.d)

+	$(REMOVE) $(SRC:.c=.i)

+	$(REMOVEDIR) .dep

+

+

+# Create object files directory

+$(shell mkdir $(OBJDIR) 2>/dev/null)

+

+

+# Include the dependency files.

+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)

+

+

+# Listing of phony targets.

+.PHONY : all begin finish end sizebefore sizeafter gccversion \

+build elf hex bin eep lss sym coff extcoff \

+clean clean_list program debug gdb-config

+

diff --git a/testhal/AVR/ICU/chconf.h b/testhal/AVR/ICU/chconf.h
new file mode 100644
index 000000000..f95f65faa
--- /dev/null
+++ b/testhal/AVR/ICU/chconf.h
@@ -0,0 +1,531 @@
+/*

+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    AVR/chconf.h

+ * @brief   Configuration file template.

+ * @details A copy of this file must be placed in each project directory, it

+ *          contains the application specific kernel settings.

+ *

+ * @addtogroup config

+ * @details Kernel related settings and hooks.

+ * @{

+ */

+

+#ifndef _CHCONF_H_

+#define _CHCONF_H_

+

+/*===========================================================================*/

+/**

+ * @name Kernel parameters and options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   System tick frequency.

+ * @details Frequency of the system timer that drives the system ticks. This

+ *          setting also defines the system tick time unit.

+ */

+#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)

+#define CH_FREQUENCY                    250

+#endif

+

+/**

+ * @brief   Round robin interval.

+ * @details This constant is the number of system ticks allowed for the

+ *          threads before preemption occurs. Setting this value to zero

+ *          disables the preemption for threads with equal priority and the

+ *          round robin becomes cooperative. Note that higher priority

+ *          threads can still preempt, the kernel is always preemptive.

+ *

+ * @note    Disabling the round robin preemption makes the kernel more compact

+ *          and generally faster.

+ */

+#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)

+#define CH_TIME_QUANTUM                 20

+#endif

+

+/**

+ * @brief   Managed RAM size.

+ * @details Size of the RAM area to be managed by the OS. If set to zero

+ *          then the whole available RAM is used. The core memory is made

+ *          available to the heap allocator and/or can be used directly through

+ *          the simplified core memory allocator.

+ *

+ * @note    In order to let the OS manage the whole RAM the linker script must

+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.

+ * @note    Requires @p CH_USE_MEMCORE.

+ */

+#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)

+#define CH_MEMCORE_SIZE                 128

+#endif

+

+/**

+ * @brief   Idle thread automatic spawn suppression.

+ * @details When this option is activated the function @p chSysInit()

+ *          does not spawn the idle thread automatically. The application has

+ *          then the responsibility to do one of the following:

+ *          - Spawn a custom idle thread at priority @p IDLEPRIO.

+ *          - Change the main() thread priority to @p IDLEPRIO then enter

+ *            an endless loop. In this scenario the @p main() thread acts as

+ *            the idle thread.

+ *          .

+ * @note    Unless an idle thread is spawned the @p main() thread must not

+ *          enter a sleep state.

+ */

+#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)

+#define CH_NO_IDLE_THREAD               FALSE

+#endif

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Performance options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   OS optimization.

+ * @details If enabled then time efficient rather than space efficient code

+ *          is used when two possible implementations exist.

+ *

+ * @note    This is not related to the compiler optimization options.

+ * @note    The default is @p TRUE.

+ */

+#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)

+#define CH_OPTIMIZE_SPEED               TRUE

+#endif

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Subsystem options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Threads registry APIs.

+ * @details If enabled then the registry APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)

+#define CH_USE_REGISTRY                 TRUE

+#endif

+

+/**

+ * @brief   Threads synchronization APIs.

+ * @details If enabled then the @p chThdWait() function is included in

+ *          the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)

+#define CH_USE_WAITEXIT                 TRUE

+#endif

+

+/**

+ * @brief   Semaphores APIs.

+ * @details If enabled then the Semaphores APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)

+#define CH_USE_SEMAPHORES               TRUE

+#endif

+

+/**

+ * @brief   Semaphores queuing mode.

+ * @details If enabled then the threads are enqueued on semaphores by

+ *          priority rather than in FIFO order.

+ *

+ * @note    The default is @p FALSE. Enable this if you have special requirements.

+ * @note    Requires @p CH_USE_SEMAPHORES.

+ */

+#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)

+#define CH_USE_SEMAPHORES_PRIORITY      FALSE

+#endif

+

+/**

+ * @brief   Atomic semaphore API.

+ * @details If enabled then the semaphores the @p chSemSignalWait() API

+ *          is included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_USE_SEMAPHORES.

+ */

+#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)

+#define CH_USE_SEMSW                    TRUE

+#endif

+

+/**

+ * @brief   Mutexes APIs.

+ * @details If enabled then the mutexes APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)

+#define CH_USE_MUTEXES                  TRUE

+#endif

+

+/**

+ * @brief   Conditional Variables APIs.

+ * @details If enabled then the conditional variables APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_USE_MUTEXES.

+ */

+#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)

+#define CH_USE_CONDVARS                 TRUE

+#endif

+

+/**

+ * @brief   Conditional Variables APIs with timeout.

+ * @details If enabled then the conditional variables APIs with timeout

+ *          specification are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_USE_CONDVARS.

+ */

+#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)

+#define CH_USE_CONDVARS_TIMEOUT         TRUE

+#endif

+

+/**

+ * @brief   Events Flags APIs.

+ * @details If enabled then the event flags APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)

+#define CH_USE_EVENTS                   TRUE

+#endif

+

+/**

+ * @brief   Events Flags APIs with timeout.

+ * @details If enabled then the events APIs with timeout specification

+ *          are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_USE_EVENTS.

+ */

+#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)

+#define CH_USE_EVENTS_TIMEOUT           TRUE

+#endif

+

+/**

+ * @brief   Synchronous Messages APIs.

+ * @details If enabled then the synchronous messages APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)

+#define CH_USE_MESSAGES                 TRUE

+#endif

+

+/**

+ * @brief   Synchronous Messages queuing mode.

+ * @details If enabled then messages are served by priority rather than in

+ *          FIFO order.

+ *

+ * @note    The default is @p FALSE. Enable this if you have special requirements.

+ * @note    Requires @p CH_USE_MESSAGES.

+ */

+#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)

+#define CH_USE_MESSAGES_PRIORITY        FALSE

+#endif

+

+/**

+ * @brief   Mailboxes APIs.

+ * @details If enabled then the asynchronous messages (mailboxes) APIs are

+ *          included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_USE_SEMAPHORES.

+ */

+#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)

+#define CH_USE_MAILBOXES                TRUE

+#endif

+

+/**

+ * @brief   I/O Queues APIs.

+ * @details If enabled then the I/O queues APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)

+#define CH_USE_QUEUES                   TRUE

+#endif

+

+/**

+ * @brief   Core Memory Manager APIs.

+ * @details If enabled then the core memory manager APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)

+#define CH_USE_MEMCORE                  FALSE

+#endif

+

+/**

+ * @brief   Heap Allocator APIs.

+ * @details If enabled then the memory heap allocator APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or

+ *          @p CH_USE_SEMAPHORES.

+ * @note    Mutexes are recommended.

+ */

+#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)

+#define CH_USE_HEAP                     FALSE

+#endif

+

+/**

+ * @brief   C-runtime allocator.

+ * @details If enabled the the heap allocator APIs just wrap the C-runtime

+ *          @p malloc() and @p free() functions.

+ *

+ * @note    The default is @p FALSE.

+ * @note    Requires @p CH_USE_HEAP.

+ * @note    The C-runtime may or may not require @p CH_USE_MEMCORE, see the

+ *          appropriate documentation.

+ */

+#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)

+#define CH_USE_MALLOC_HEAP              FALSE

+#endif

+

+/**

+ * @brief   Memory Pools Allocator APIs.

+ * @details If enabled then the memory pools allocator APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)

+#define CH_USE_MEMPOOLS                 FALSE

+#endif

+

+/**

+ * @brief   Dynamic Threads APIs.

+ * @details If enabled then the dynamic threads creation APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_USE_WAITEXIT.

+ * @note    Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.

+ */

+#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)

+#define CH_USE_DYNAMIC                  FALSE

+#endif

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Debug options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Debug option, system state check.

+ * @details If enabled the correct call protocol for system APIs is checked

+ *          at runtime.

+ *

+ * @note    The default is @p FALSE.

+ */

+#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)

+#define CH_DBG_SYSTEM_STATE_CHECK       FALSE

+#endif

+

+/**

+ * @brief   Debug option, parameters checks.

+ * @details If enabled then the checks on the API functions input

+ *          parameters are activated.

+ *

+ * @note    The default is @p FALSE.

+ */

+#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)

+#define CH_DBG_ENABLE_CHECKS            FALSE

+#endif

+

+/**

+ * @brief   Debug option, consistency checks.

+ * @details If enabled then all the assertions in the kernel code are

+ *          activated. This includes consistency checks inside the kernel,

+ *          runtime anomalies and port-defined checks.

+ *

+ * @note    The default is @p FALSE.

+ */

+#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)

+#define CH_DBG_ENABLE_ASSERTS           FALSE

+#endif

+

+/**

+ * @brief   Debug option, trace buffer.

+ * @details If enabled then the context switch circular trace buffer is

+ *          activated.

+ *

+ * @note    The default is @p FALSE.

+ */

+#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)

+#define CH_DBG_ENABLE_TRACE             FALSE

+#endif

+

+/**

+ * @brief   Debug option, stack checks.

+ * @details If enabled then a runtime stack check is performed.

+ *

+ * @note    The default is @p FALSE.

+ * @note    The stack check is performed in a architecture/port dependent way.

+ *          It may not be implemented or some ports.

+ * @note    The default failure mode is to halt the system with the global

+ *          @p panic_msg variable set to @p NULL.

+ */

+#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)

+#define CH_DBG_ENABLE_STACK_CHECK       FALSE

+#endif

+

+/**

+ * @brief   Debug option, stacks initialization.

+ * @details If enabled then the threads working area is filled with a byte

+ *          value when a thread is created. This can be useful for the

+ *          runtime measurement of the used stack.

+ *

+ * @note    The default is @p FALSE.

+ */

+#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)

+#define CH_DBG_FILL_THREADS             FALSE

+#endif

+

+/**

+ * @brief   Debug option, threads profiling.

+ * @details If enabled then a field is added to the @p Thread structure that

+ *          counts the system ticks occurred while executing the thread.

+ *

+ * @note    The default is @p TRUE.

+ * @note    This debug option is defaulted to TRUE because it is required by

+ *          some test cases into the test suite.

+ */

+#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)

+#define CH_DBG_THREADS_PROFILING        TRUE

+#endif

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Kernel hooks

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Threads descriptor structure extension.

+ * @details User fields added to the end of the @p Thread structure.

+ */

+#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)

+#define THREAD_EXT_FIELDS                                                   \

+  /* Add threads custom fields here.*/

+#endif

+

+/**

+ * @brief   Threads initialization hook.

+ * @details User initialization code added to the @p chThdInit() API.

+ *

+ * @note    It is invoked from within @p chThdInit() and implicitily from all

+ *          the threads creation APIs.

+ */

+#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)

+#define THREAD_EXT_INIT_HOOK(tp) {                                          \

+  /* Add threads initialization code here.*/                                \

+}

+#endif

+

+/**

+ * @brief   Threads finalization hook.

+ * @details User finalization code added to the @p chThdExit() API.

+ *

+ * @note    It is inserted into lock zone.

+ * @note    It is also invoked when the threads simply return in order to

+ *          terminate.

+ */

+#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)

+#define THREAD_EXT_EXIT_HOOK(tp) {                                          \

+  /* Add threads finalization code here.*/                                  \

+}

+#endif

+

+/**

+ * @brief   Context switch hook.

+ * @details This hook is invoked just before switching between threads.

+ */

+#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)

+#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \

+  /* System halt code here.*/                                               \

+}

+#endif

+

+/**

+ * @brief   Idle Loop hook.

+ * @details This hook is continuously invoked by the idle thread loop.

+ */

+#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)

+#define IDLE_LOOP_HOOK() {                                                  \

+  /* Idle loop code here.*/                                                 \

+}

+#endif

+

+/**

+ * @brief   System tick event hook.

+ * @details This hook is invoked in the system tick handler immediately

+ *          after processing the virtual timers queue.

+ */

+#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)

+#define SYSTEM_TICK_EVENT_HOOK() {                                          \

+  /* System tick event code here.*/                                         \

+}

+#endif

+

+/**

+ * @brief   System halt hook.

+ * @details This hook is invoked in case to a system halting error before

+ *          the system is halted.

+ */

+#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)

+#define SYSTEM_HALT_HOOK() {                                                \

+  /* System halt code here.*/                                               \

+}

+#endif

+

+/** @} */

+

+/*===========================================================================*/

+/* Port-specific settings (override port settings defaulted in chcore.h).    */

+/*===========================================================================*/

+

+#endif  /* _CHCONF_H_ */

+

+/** @} */

diff --git a/testhal/AVR/ICU/halconf.h b/testhal/AVR/ICU/halconf.h
new file mode 100644
index 000000000..dd88b74b2
--- /dev/null
+++ b/testhal/AVR/ICU/halconf.h
@@ -0,0 +1,345 @@
+/*

+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    templates/halconf.h

+ * @brief   HAL configuration header.

+ * @details HAL configuration file, this file allows to enable or disable the

+ *          various device drivers from your application. You may also use

+ *          this file in order to override the device drivers default settings.

+ *

+ * @addtogroup HAL_CONF

+ * @{

+ */

+

+#ifndef _HALCONF_H_

+#define _HALCONF_H_

+

+#include "mcuconf.h"

+

+/**

+ * @brief   Enables the TM subsystem.

+ */

+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)

+#define HAL_USE_TM                  FALSE

+#endif

+

+/**

+ * @brief   Enables the PAL subsystem.

+ */

+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)

+#define HAL_USE_PAL                 TRUE

+#endif

+

+/**

+ * @brief   Enables the ADC subsystem.

+ */

+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)

+#define HAL_USE_ADC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the DAC subsystem.

+ */

+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)

+#define HAL_USE_DAC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the CAN subsystem.

+ */

+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)

+#define HAL_USE_CAN                 FALSE

+#endif

+

+/**

+ * @brief   Enables the EXT subsystem.

+ */

+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)

+#define HAL_USE_EXT                 FALSE

+#endif

+

+/**

+ * @brief   Enables the GPT subsystem.

+ */

+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)

+#define HAL_USE_GPT                 FALSE

+#endif

+

+/**

+ * @brief   Enables the I2C subsystem.

+ */

+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)

+#define HAL_USE_I2C                 FALSE

+#endif

+

+/**

+ * @brief   Enables the ICU subsystem.

+ */

+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)

+#define HAL_USE_ICU                 TRUE

+#endif

+

+/**

+ * @brief   Enables the MAC subsystem.

+ */

+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)

+#define HAL_USE_MAC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the MMC_SPI subsystem.

+ */

+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)

+#define HAL_USE_MMC_SPI             FALSE

+#endif

+

+/**

+ * @brief   Enables the PWM subsystem.

+ */

+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)

+#define HAL_USE_PWM                 FALSE

+#endif

+

+/**

+ * @brief   Enables the RTC subsystem.

+ */

+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)

+#define HAL_USE_RTC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the SDC subsystem.

+ */

+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)

+#define HAL_USE_SDC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the SERIAL subsystem.

+ */

+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)

+#define HAL_USE_SERIAL              TRUE

+#endif

+

+/**

+ * @brief   Enables the SERIAL over USB subsystem.

+ */

+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)

+#define HAL_USE_SERIAL_USB          FALSE

+#endif

+

+/**

+ * @brief   Enables the SPI subsystem.

+ */

+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)

+#define HAL_USE_SPI                 FALSE

+#endif

+

+/**

+ * @brief   Enables the UART subsystem.

+ */

+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)

+#define HAL_USE_UART                FALSE

+#endif

+

+/**

+ * @brief   Enables the USB subsystem.

+ */

+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)

+#define HAL_USE_USB                 FALSE

+#endif

+

+/*===========================================================================*/

+/* ADC driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables synchronous APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)

+#define ADC_USE_WAIT                TRUE

+#endif

+

+/**

+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

+#define ADC_USE_MUTUAL_EXCLUSION    TRUE

+#endif

+

+/*===========================================================================*/

+/* CAN driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Sleep mode related APIs inclusion switch.

+ */

+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)

+#define CAN_USE_SLEEP_MODE          TRUE

+#endif

+

+/*===========================================================================*/

+/* I2C driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables the mutual exclusion APIs on the I2C bus.

+ */

+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

+#define I2C_USE_MUTUAL_EXCLUSION    TRUE

+#endif

+

+/*===========================================================================*/

+/* MAC driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables an event sources for incoming packets.

+ */

+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)

+#define MAC_USE_EVENTS              TRUE

+#endif

+

+/*===========================================================================*/

+/* MMC_SPI driver related settings.                                          */

+/*===========================================================================*/

+

+/**

+ * @brief   Block size for MMC transfers.

+ */

+#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__)

+#define MMC_SECTOR_SIZE             512

+#endif

+

+/**

+ * @brief   Delays insertions.

+ * @details If enabled this options inserts delays into the MMC waiting

+ *          routines releasing some extra CPU time for the threads with

+ *          lower priority, this may slow down the driver a bit however.

+ *          This option is recommended also if the SPI driver does not

+ *          use a DMA channel and heavily loads the CPU.

+ */

+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)

+#define MMC_NICE_WAITING            TRUE

+#endif

+

+/**

+ * @brief   Number of positive insertion queries before generating the

+ *          insertion event.

+ */

+#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__)

+#define MMC_POLLING_INTERVAL        10

+#endif

+

+/**

+ * @brief   Interval, in milliseconds, between insertion queries.

+ */

+#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__)

+#define MMC_POLLING_DELAY           10

+#endif

+

+/**

+ * @brief   Uses the SPI polled API for small data transfers.

+ * @details Polled transfers usually improve performance because it

+ *          saves two context switches and interrupt servicing. Note

+ *          that this option has no effect on large transfers which

+ *          are always performed using DMAs/IRQs.

+ */

+#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__)

+#define MMC_USE_SPI_POLLING         TRUE

+#endif

+

+/*===========================================================================*/

+/* SDC driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Number of initialization attempts before rejecting the card.

+ * @note    Attempts are performed at 10mS intevals.

+ */

+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)

+#define SDC_INIT_RETRY              100

+#endif

+

+/**

+ * @brief   Include support for MMC cards.

+ * @note    MMC support is not yet implemented so this option must be kept

+ *          at @p FALSE.

+ */

+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)

+#define SDC_MMC_SUPPORT             FALSE

+#endif

+

+/**

+ * @brief   Delays insertions.

+ * @details If enabled this options inserts delays into the MMC waiting

+ *          routines releasing some extra CPU time for the threads with

+ *          lower priority, this may slow down the driver a bit however.

+ */

+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)

+#define SDC_NICE_WAITING            TRUE

+#endif

+

+/*===========================================================================*/

+/* SERIAL driver related settings.                                           */

+/*===========================================================================*/

+

+/**

+ * @brief   Default bit rate.

+ * @details Configuration parameter, this is the baud rate selected for the

+ *          default configuration.

+ */

+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)

+#define SERIAL_DEFAULT_BITRATE      38400

+#endif

+

+/**

+ * @brief   Serial buffers size.

+ * @details Configuration parameter, you can change the depth of the queue

+ *          buffers depending on the requirements of your application.

+ * @note    The default is 64 bytes for both the transmission and receive

+ *          buffers.

+ */

+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)

+#define SERIAL_BUFFERS_SIZE         16

+#endif

+

+/*===========================================================================*/

+/* SPI driver related settings.                                              */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables synchronous APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)

+#define SPI_USE_WAIT                TRUE

+#endif

+

+/**

+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

+#define SPI_USE_MUTUAL_EXCLUSION    TRUE

+#endif

+

+#endif /* _HALCONF_H_ */

+

+/** @} */

diff --git a/testhal/AVR/ICU/main.c b/testhal/AVR/ICU/main.c
new file mode 100644
index 000000000..80fd04516
--- /dev/null
+++ b/testhal/AVR/ICU/main.c
@@ -0,0 +1,140 @@
+/*

+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+#include "ch.h"

+#include "hal.h"

+#include "chprintf.h"

+

+#define LED  7

+

+static icucnt_t width = 0;

+static icucnt_t period = 0;

+static Thread *thread1 = NULL;

+static Thread *thread2 = NULL;

+static Thread *thread_main = NULL;

+static const uint32_t ICU_CLK = F_CPU / 1024;

+

+void width_cb(ICUDriver *icup) {

+  width = icup->width;

+}

+

+void period_cb(ICUDriver *icup) {

+  period = icup->period;

+  chSysLockFromIsr();

+  chEvtSignalI(thread1, (eventmask_t) 1);

+  chSysUnlockFromIsr();

+}

+

+void overflow_cb(ICUDriver *icup) {

+  chSysLockFromIsr();

+  chEvtSignalI(thread2, (eventmask_t) 1);

+  chSysUnlockFromIsr();

+}

+

+void output_single_cycle(const uint16_t low, const uint16_t high) {

+  palClearPad(IOPORT2, LED);

+  palClearPad(IOPORT4, 4);

+  chThdSleepMilliseconds(low);

+  palSetPad(IOPORT2, LED);

+  palSetPad(IOPORT4, 4);

+  chThdSleepMilliseconds(high);

+  palClearPad(IOPORT2, LED);

+  palClearPad(IOPORT4, 4);

+}

+

+static WORKING_AREA(waThread1, 64);

+static msg_t Thread1(void *arg) {

+

+  BaseSequentialStream *serp = (BaseSequentialStream *) &SD1;

+  thread1 = chThdSelf();

+  while (TRUE) {

+    chEvtWaitAny((eventmask_t) 1);

+    chprintf(serp, "WIDTH[%lu ms, %u ticks] PERIOD[%lu ms, %u ticks]\r\n",

+                   ((uint32_t) width * 1000) / ICU_CLK,

+                   width,

+                   ((uint32_t) period * 1000) / ICU_CLK,

+                   period);

+    chEvtSignal(thread_main, (eventmask_t) 1);

+  }

+  return 0;

+}

+

+static WORKING_AREA(waThread2, 64);

+static msg_t Thread2(void *arg) {

+

+  BaseSequentialStream *serp = (BaseSequentialStream *) &SD1;

+  thread2 = chThdSelf();

+  while (TRUE) {

+    chEvtWaitAny((eventmask_t) 1);

+    chprintf(serp, "OVERFLOW\r\n");

+    chEvtSignal(thread_main, (eventmask_t) 2);

+  }

+  return 0;

+}

+

+int main(void) {

+

+  halInit();

+  chSysInit();

+

+  static ICUConfig icu3cfg = {

+    ICU_INPUT_ACTIVE_HIGH,

+    0, /* bogus frequency */

+    width_cb,

+    period_cb,

+    overflow_cb,

+  };

+

+  palSetPadMode(IOPORT2, LED, PAL_MODE_OUTPUT_PUSHPULL);

+  palSetPadMode(IOPORT4, 4, PAL_MODE_OUTPUT_PUSHPULL);

+  palClearPad(IOPORT2, LED);

+  palClearPad(IOPORT4, 4);

+

+  sdStart(&SD1, NULL);

+  icuStart(&ICUD3, &icu3cfg);

+

+  thread_main = chThdSelf();

+

+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);

+  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);

+

+  while (1) {

+    BaseSequentialStream *serp = (BaseSequentialStream *) &SD1;

+

+    chprintf(serp, "Testing 50 duty cycle\r\n");

+    icuEnable(&ICUD3);

+    output_single_cycle(500, 500);

+    icuDisable(&ICUD3);

+    chEvtWaitAny((eventmask_t) 3);

+

+    chprintf(serp, "Testing 25 duty cycle\r\n");

+    icuEnable(&ICUD3);

+    output_single_cycle(250, 750);

+    icuDisable(&ICUD3);

+    chEvtWaitAny((eventmask_t) 3);

+

+    chprintf(serp, "Testing 75 duty cycle\r\n");

+    icuEnable(&ICUD3);

+    output_single_cycle(750, 250);

+    icuDisable(&ICUD3);

+    chEvtWaitAny((eventmask_t) 3);

+

+    chprintf(serp, "Testing overflow\r\n");

+    icuEnable(&ICUD3);

+    chEvtWaitAny((eventmask_t) 3);

+    icuDisable(&ICUD3);

+  }

+}

diff --git a/testhal/AVR/ICU/mcuconf.h b/testhal/AVR/ICU/mcuconf.h
new file mode 100644
index 000000000..d89ff2b45
--- /dev/null
+++ b/testhal/AVR/ICU/mcuconf.h
@@ -0,0 +1,26 @@
+/*

+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/*

+ * AVR drivers configuration.

+ * The following settings override the default settings present in

+ * the various device driver implementation headers.

+ * Note that the settings for each driver only have effect if the driver

+ * is enabled in halconf.h.

+ */

+

+#define AVR_SERIAL_USE_USART0           TRUE

+#define AVR_ICU_USE_ICU3                TRUE

diff --git a/testhal/AVR/ICU/readme.txt b/testhal/AVR/ICU/readme.txt
new file mode 100644
index 000000000..c9b431083
--- /dev/null
+++ b/testhal/AVR/ICU/readme.txt
@@ -0,0 +1,25 @@
+*****************************************************************************

+** ChibiOS/RT port for Atmel AVR ATmega1280.                                **

+*****************************************************************************

+

+** TARGET **

+

+The demo runs on an Arduino Mega board.

+

+** The Demo **

+

+This demo uses ICP3 (ICU3 input) which is located on pin PE7 to measure signal

+width and period. The signal is output on pin PD4 using standard PAL calls and

+thread sleep functions. PD4 must be wired to PE7. It outputs three different

+waveforms with aproximately 1s duration using 50%, 25% and 75% respective duty

+cycles. After that it just turns on ICU3 and waits for it to overflow. The values

+read on each of these operations is output to SERIAL1.

+

+** Build Procedure **

+

+The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

+

+** Notes **

+

+This demo runs natively so the Arduino bootloader must be removed and the FUSEs

+reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.