Added board files for Maple Mini.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@4264 35acf78f-673a-0410-8e92-d51de3d6d3f4

4 files changed, 202 insertions, 0 deletions

diff --git a/boards/MAPLEMINI_STM32_F103/board.c b/boards/MAPLEMINI_STM32_F103/board.c
new file mode 100644
index 000000000..7cfa18fd6
--- /dev/null
+++ b/boards/MAPLEMINI_STM32_F103/board.c
@@ -0,0 +1,54 @@
++/*

+    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,

+                 2011,2012 Giovanni Di Sirio.

+

+    This file is part of ChibiOS/RT.

+

+    ChibiOS/RT is free software; you can redistribute it and/or modify

+    it under the terms of the GNU General Public License as published by

+    the Free Software Foundation; either version 3 of the License, or

+    (at your option) any later version.

+

+    ChibiOS/RT is distributed in the hope that it will be useful,

+    but WITHOUT ANY WARRANTY; without even the implied warranty of

+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+    GNU General Public License for more details.

+

+    You should have received a copy of the GNU General Public License

+    along with this program.  If not, see <http://www.gnu.org/licenses/>.

+*/

+

+#include "ch.h"

+#include "hal.h"

+

+/**

+ * @brief   PAL setup.

+ * @details Digital I/O ports static configuration as defined in @p board.h.

+ *          This variable is used by the HAL when initializing the PAL driver.

+ */

+#if HAL_USE_PAL || defined(__DOXYGEN__)

+const PALConfig pal_default_config =

+{

+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},

+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},

+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},

+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},

+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},

+};

+#endif

+

+/*

+ * Early initialization code.

+ * This initialization must be performed just after stack setup and before

+ * any other initialization.

+ */

+void __early_init(void) {

+

+  stm32_clock_init();

+}

+

+/*

+ * Board-specific initialization code.

+ */

+void boardInit(void) {

+}

diff --git a/boards/MAPLEMINI_STM32_F103/board.h b/boards/MAPLEMINI_STM32_F103/board.h
new file mode 100644
index 000000000..9adcc1539
--- /dev/null
+++ b/boards/MAPLEMINI_STM32_F103/board.h
@@ -0,0 +1,141 @@
++/*

+    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,

+                 2011,2012 Giovanni Di Sirio.

+

+    This file is part of ChibiOS/RT.

+

+    ChibiOS/RT is free software; you can redistribute it and/or modify

+    it under the terms of the GNU General Public License as published by

+    the Free Software Foundation; either version 3 of the License, or

+    (at your option) any later version.

+

+    ChibiOS/RT is distributed in the hope that it will be useful,

+    but WITHOUT ANY WARRANTY; without even the implied warranty of

+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+    GNU General Public License for more details.

+

+    You should have received a copy of the GNU General Public License

+    along with this program.  If not, see <http://www.gnu.org/licenses/>.

+*/

+

+#ifndef _BOARD_H_

+#define _BOARD_H_

+

+/*

+ * Setup for the LeafLabs Maple Mini.

+ */

+

+/*

+ * Board identifier.

+ */

+#define BOARD_MAPLEMINI_STM32_F103

+#define BOARD_NAME              "LeafLabs Maple Mini"

+

+/*

+ * Board frequencies.

+ */

+#define STM32_LSECLK            32768

+#define STM32_HSECLK            8000000

+

+/*

+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.

+ */

+#define STM32F10X_MD

+

+/*

+ * IO pins assignments.

+ */

+/* Missing.*/

+

+/*

+ * I/O ports initial setup, this configuration is established soon after reset

+ * in the initialization code.

+ *

+ * The digits have the following meaning:

+ *   0 - Analog input.

+ *   1 - Push Pull output 10MHz.

+ *   2 - Push Pull output 2MHz.

+ *   3 - Push Pull output 50MHz.

+ *   4 - Digital input.

+ *   5 - Open Drain output 10MHz.

+ *   6 - Open Drain output 2MHz.

+ *   7 - Open Drain output 50MHz.

+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.

+ *   9 - Alternate Push Pull output 10MHz.

+ *   A - Alternate Push Pull output 2MHz.

+ *   B - Alternate Push Pull output 50MHz.

+ *   C - Reserved.

+ *   D - Alternate Open Drain output 10MHz.

+ *   E - Alternate Open Drain output 2MHz.

+ *   F - Alternate Open Drain output 50MHz.

+ * Please refer to the STM32 Reference Manual for details.

+ */

+

+/*

+ * Port A setup.

+ * Everything input with pull-up except:

+ * PA2  - Alternate output  (USART2 TX).

+ * PA3  - Normal input      (USART2 RX).

+ * PA9  - Alternate output  (USART1 TX).

+ * PA10 - Normal input      (USART1 RX).

+ */

+#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */

+#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */

+#define VAL_GPIOAODR            0xFFFFFFFF

+

+/*

+ * Port B setup.

+ * Everything input with pull-up except:

+ * PB1  - Push Pull output  (LED).

+ */

+#define VAL_GPIOBCRL            0x88888838      /*  PB7...PB0 */

+#define VAL_GPIOBCRH            0x88888888      /* PB15...PB8 */

+#define VAL_GPIOBODR            0xFFFFFFFF

+

+/*

+ * Port C setup.

+ * Everything input with pull-up except:

+ */

+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */

+#define VAL_GPIOCCRH            0x88888888      /* PC15...PC8 */

+#define VAL_GPIOCODR            0xFFFFFFFF

+

+/*

+ * Port D setup.

+ * Everything input with pull-up except:

+ * PD0  - Normal input (XTAL).

+ * PD1  - Normal input (XTAL).

+ */

+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */

+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */

+#define VAL_GPIODODR            0xFFFFFFFF

+

+/*

+ * Port E setup.

+ * Everything input with pull-up except:

+ */

+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */

+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */

+#define VAL_GPIOEODR            0xFFFFFFFF

+

+/*

+ * USB bus activation macro, required by the USB driver.

+ */

+#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISC)

+

+/*

+ * USB bus de-activation macro, required by the USB driver.

+ */

+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISC)

+

+#if !defined(_FROM_ASM_)

+#ifdef __cplusplus

+extern "C" {

+#endif

+  void boardInit(void);

+#ifdef __cplusplus

+}

+#endif

+#endif /* _FROM_ASM_ */

+

+#endif /* _BOARD_H_ */

diff --git a/boards/MAPLEMINI_STM32_F103/board.mk b/boards/MAPLEMINI_STM32_F103/board.mk
new file mode 100644
index 000000000..ab4b30cac
--- /dev/null
+++ b/boards/MAPLEMINI_STM32_F103/board.mk
@@ -0,0 +1,5 @@
+# List of all the board related files.

+BOARDSRC = ${CHIBIOS}/boards/MAPLEMINI_STM32_F103/board.c

+

+# Required include directories

+BOARDINC = ${CHIBIOS}/boards/MAPLEMINI_STM32_F103

diff --git a/readme.txt b/readme.txt
index 95c243c02..95d3e6bdb 100644
--- a/readme.txt
+++ b/readme.txt
@@ -144,6 +144,8 @@
   3484947)(backported to 2.4.1).

 - FIX: Fixed various minor documentation errors (bug 3484942)(backported

   to 2.4.1).

+- NEW: Added board files for Maple Mini STM32F103, contributed by Wagner

+  Sartori Junior.

 - NEW: Added SSP1 capability to the LPC13xx SPI driver.

 - NEW: Updated vendor headers for LPC11xx and LPC13xx, the new headers

   support several new devices.