1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
|
/*
ChibiOS/HAL - Copyright (C) 2014 Adam J. Porter
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file MK66F18/pwm_lld.c
* @brief KINETIS PWM subsystem low level driver source.
*
* @addtogroup PWM
* @{
*/
#include "hal.h"
#if HAL_USE_PWM || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/**
* @brief PWMD1 driver identifier.
* @note The driver PWMD1 allocates the timer FTM0 when enabled.
*/
#if KINETIS_PWM_USE_FTM0 || defined(__DOXYGEN__)
PWMDriver PWMD1;
#endif
/**
* @brief PWMD2 driver identifier.
* @note The driver PWMD2 allocates the timer FTM1 when enabled.
*/
#if KINETIS_PWM_USE_FTM1 || defined(__DOXYGEN__)
PWMDriver PWMD2;
#endif
/**
* @brief PWMD3 driver identifier.
* @note The driver PWMD3 allocates the timer FTM2 when enabled.
*/
#if KINETIS_PWM_USE_FTM2 || defined(__DOXYGEN__)
PWMDriver PWMD3;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void pwm_lld_serve_interrupt(PWMDriver *pwmp) {
uint32_t sr;
sr = pwmp->ftm->SC;
pwmp->ftm->SC = sr&(~FTM_SC_TOF);
if (((sr & FTM_SC_TOF) != 0) && /* Timer Overflow */
((sr & FTM_SC_TOIE) != 0) &&
(pwmp->config->callback != NULL)) {
pwmp->config->callback(pwmp);
}
uint8_t n=0;
for(n=0;n<pwmp->channels;n++) {
sr = pwmp->ftm->CHANNEL[n].CnSC;
pwmp->ftm->CHANNEL[n].CnSC = sr&(~FTM_CnSC_CHF);
if (((sr & FTM_CnSC_CHF) != 0) &&
((sr & FTM_CnSC_CHIE) != 0) &&
(pwmp->config->channels[n].callback != NULL)) {
pwmp->config->channels[n].callback(pwmp);
}
}
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if KINETIS_PWM_USE_FTM0
/**
* @brief FTM0 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(KINETIS_FTM0_IRQ_VECTOR) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD1);
OSAL_IRQ_EPILOGUE();
}
#endif /* KINETIS_PWM_USE_FTM0 */
#if KINETIS_PWM_USE_FTM1
/**
* @brief FTM1 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(KINETIS_FTM1_IRQ_VECTOR) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD2);
OSAL_IRQ_EPILOGUE();
}
#endif /* KINETIS_PWM_USE_FTM1 */
#if KINETIS_PWM_USE_FTM2
/**
* @brief FTM2 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(KINETIS_FTM2_IRQ_VECTOR) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD3);
OSAL_IRQ_EPILOGUE();
}
#endif /* KINETIS_PWM_USE_FTM2 */
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level PWM driver initialization.
*
* @notapi
*/
void pwm_lld_init(void) {
#if KINETIS_PWM_USE_FTM0
pwmObjectInit(&PWMD1);
PWMD1.channels = KINETIS_FTM0_CHANNELS;
PWMD1.ftm = FTM0;
#endif
#if KINETIS_PWM_USE_FTM1
pwmObjectInit(&PWMD2);
PWMD2.channels = KINETIS_FTM1_CHANNELS;
PWMD2.ftm = FTM1;
#endif
#if KINETIS_PWM_USE_FTM2
pwmObjectInit(&PWMD3);
PWMD3.channels = KINETIS_FTM2_CHANNELS;
PWMD3.ftm = FTM2;
#endif
}
/**
* @brief Configures and activates the PWM peripheral.
* @note Starting a driver that is already in the @p PWM_READY state
* disables all the active channels.
*
* @param[in] pwmp pointer to a @p PWMDriver object
*
* @notapi
*/
void pwm_lld_start(PWMDriver *pwmp) {
uint16_t psc;
uint8_t i=0;
if (pwmp->state == PWM_STOP) {
/* Clock activation and timer reset.*/
#if KINETIS_PWM_USE_FTM0
if (&PWMD1 == pwmp) {
SIM->SCGC6 |= SIM_SCGC6_FTM0;
nvicEnableVector(FTM0_IRQn, KINETIS_PWM_FTM0_PRIORITY);
}
#endif
#if KINETIS_PWM_USE_FTM1
if (&PWMD2 == pwmp) {
SIM->SCGC6 |= SIM_SCGC6_FTM1;
nvicEnableVector(FTM1_IRQn, KINETIS_PWM_FTM1_PRIORITY);
}
#endif
#if KINETIS_PWM_USE_FTM2
if (&PWMD3 == pwmp) {
SIM->SCGC3 |= SIM_SCGC3_FTM2;
nvicEnableVector(FTM2_IRQn, KINETIS_PWM_FTM2_PRIORITY);
}
#endif
}
pwmp->ftm->MODE = FTM_MODE_FTMEN_MASK|FTM_MODE_PWMSYNC_MASK;
pwmp->ftm->SYNC = FTM_SYNC_CNTMIN_MASK|FTM_SYNC_CNTMAX_MASK
|FTM_SYNC_SWSYNC_MASK;
pwmp->ftm->COMBINE = FTM_COMBINE_SYNCEN3_MASK | FTM_COMBINE_SYNCEN2_MASK
| FTM_COMBINE_SYNCEN1_MASK | FTM_COMBINE_SYNCEN0_MASK;
pwmp->ftm->SYNCONF = FTM_SYNCONF_SYNCMODE_MASK;
pwmp->ftm->CNTIN = 0x0000;
//~ pwmp->ftm->SC = 0; /* Disable FTM counter.*/
pwmp->ftm->CNT = 0x0000; /* Clear count register.*/
/* Prescaler value calculation.*/
psc = (KINETIS_SYSCLK_FREQUENCY / pwmp->config->frequency);
//~ /* Prescaler must be power of two between 1 and 128.*/
osalDbgAssert(psc <= 128 && !(psc & (psc - 1)), "invalid frequency");
//~ /* Prescaler register value determination.
//~ Prescaler register value conveniently corresponds to bit position,
//~ i.e., register value for prescaler CLK/64 is 6 ((1 << 6) == 64).*/
for (i = 0; i < 8; i++) {
if (psc == (unsigned)(1 << i)) {
break;
}
}
/* Set prescaler and clock mode.
This also sets the following:
CPWMS up-counting mode
Timer overflow interrupt disabled
DMA disabled.*/
pwmp->ftm->SC = FTM_SC_CLKS(1) | FTM_SC_PS(i);
/* Configure period */
pwmp->ftm->MOD = pwmp->period-1;
pwmp->ftm->PWMLOAD = FTM_PWMLOAD_LDOK_MASK;
}
/**
* @brief Deactivates the PWM peripheral.
*
* @param[in] pwmp pointer to a @p PWMDriver object
*
* @notapi
*/
void pwm_lld_stop(PWMDriver *pwmp) {
/* If in ready state then disables the PWM clock.*/
if (pwmp->state == PWM_READY) {
#if KINETIS_PWM_USE_FTM0
if (&PWMD1 == pwmp) {
SIM->SCGC6 &= ~SIM_SCGC6_FTM0;
nvicDisableVector(FTM0_IRQn);
}
#endif
#if KINETIS_PWM_USE_FTM1
if (&PWMD2 == pwmp) {
SIM->SCGC6 &= ~SIM_SCGC6_FTM1;
nvicDisableVector(FTM1_IRQn);
}
#endif
#if KINETIS_PWM_USE_FTM2
if (&PWMD3 == pwmp) {
SIM->SCGC3 &= ~SIM_SCGC3_FTM2;
nvicDisableVector(FTM2_IRQn);
}
#endif
/* Disable FTM counter.*/
pwmp->ftm->SC = 0;
pwmp->ftm->MOD = 0;
}
}
/**
* @brief Enables a PWM channel.
* @pre The PWM unit must have been activated using @p pwmStart().
* @post The channel is active using the specified configuration.
* @note The function has effect at the next cycle start.
* @note Channel notification is not enabled.
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...channels-1)
* @param[in] width PWM pulse width as clock pulses number
*
* @notapi
*/
void pwm_lld_enable_channel(PWMDriver *pwmp,
pwmchannel_t channel,
pwmcnt_t width) {
uint32_t mode = FTM_CnSC_MSB; /* Edge-aligned PWM mode.*/
switch (pwmp->config->channels[channel].mode & PWM_OUTPUT_MASK) {
case PWM_OUTPUT_ACTIVE_HIGH:
mode |= FTM_CnSC_ELSB;
break;
case PWM_OUTPUT_ACTIVE_LOW:
mode |= FTM_CnSC_ELSA;
break;
}
if (pwmp->ftm->CHANNEL[channel].CnSC & FTM_CnSC_CHIE)
mode |= FTM_CnSC_CHIE;
pwmp->ftm->CHANNEL[channel].CnSC = mode;
pwmp->ftm->CHANNEL[channel].CnV = width;
pwmp->ftm->PWMLOAD = FTM_PWMLOAD_LDOK_MASK;
}
/**
* @brief Disables a PWM channel and its notification.
* @pre The PWM unit must have been activated using @p pwmStart().
* @post The channel is disabled and its output line returned to the
* idle state.
* @note The function has effect at the next cycle start.
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...channels-1)
*
* @notapi
*/
void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) {
pwmp->ftm->CHANNEL[channel].CnSC = 0;
pwmp->ftm->CHANNEL[channel].CnV = 0;
}
/**
* @brief Enables the periodic activation edge notification.
* @pre The PWM unit must have been activated using @p pwmStart().
* @note If the notification is already enabled then the call has no effect.
*
* @param[in] pwmp pointer to a @p PWMDriver object
*
* @notapi
*/
void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) {
pwmp->ftm->SC |= FTM_SC_TOIE;
}
/**
* @brief Disables the periodic activation edge notification.
* @pre The PWM unit must have been activated using @p pwmStart().
* @note If the notification is already disabled then the call has no effect.
*
* @param[in] pwmp pointer to a @p PWMDriver object
*
* @notapi
*/
void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) {
pwmp->ftm->SC &= ~FTM_SC_TOIE;
}
/**
* @brief Enables a channel de-activation edge notification.
* @pre The PWM unit must have been activated using @p pwmStart().
* @pre The channel must have been activated using @p pwmEnableChannel().
* @note If the notification is already enabled then the call has no effect.
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...channels-1)
*
* @notapi
*/
void pwm_lld_enable_channel_notification(PWMDriver *pwmp,
pwmchannel_t channel) {
pwmp->ftm->CHANNEL[channel].CnSC |= FTM_CnSC_CHIE;
}
/**
* @brief Disables a channel de-activation edge notification.
* @pre The PWM unit must have been activated using @p pwmStart().
* @pre The channel must have been activated using @p pwmEnableChannel().
* @note If the notification is already disabled then the call has no effect.
*
* @param[in] pwmp pointer to a @p PWMDriver object
* @param[in] channel PWM channel identifier (0...channels-1)
*
* @notapi
*/
void pwm_lld_disable_channel_notification(PWMDriver *pwmp,
pwmchannel_t channel) {
pwmp->ftm->CHANNEL[channel].CnSC &= ~FTM_CnSC_CHIE;
}
#endif /* HAL_USE_PWM */
/** @} */
|