path: root/os/common/ext/TivaWare/inc/tm4c1230e6pm.h

//*****************************************************************************
//
// tm4c1230e6pm.h - TM4C1230E6PM Register Definitions
//
// Copyright (c) 2013-2016 Texas Instruments Incorporated.  All rights reserved.
// Software License Agreement
// 
//   Redistribution and use in source and binary forms, with or without
//   modification, are permitted provided that the following conditions
//   are met:
// 
//   Redistributions of source code must retain the above copyright
//   notice, this list of conditions and the following disclaimer.
// 
//   Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the  
//   distribution.
// 
//   Neither the name of Texas Instruments Incorporated nor the names of
//   its contributors may be used to endorse or promote products derived
//   from this software without specific prior written permission.
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// 
// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package.
//
//*****************************************************************************

#ifndef __TM4C1230E6PM_H__
#define __TM4C1230E6PM_H__

//*****************************************************************************
//
// Interrupt assignments
//
//*****************************************************************************
#define INT_GPIOA               16          // GPIO Port A
#define INT_GPIOB               17          // GPIO Port B
#define INT_GPIOC               18          // GPIO Port C
#define INT_GPIOD               19          // GPIO Port D
#define INT_GPIOE               20          // GPIO Port E
#define INT_UART0               21          // UART0
#define INT_UART1               22          // UART1
#define INT_SSI0                23          // SSI0
#define INT_I2C0                24          // I2C0
#define INT_ADC0SS0             30          // ADC0 Sequence 0
#define INT_ADC0SS1             31          // ADC0 Sequence 1
#define INT_ADC0SS2             32          // ADC0 Sequence 2
#define INT_ADC0SS3             33          // ADC0 Sequence 3
#define INT_WATCHDOG            34          // Watchdog Timers 0 and 1
#define INT_TIMER0A             35          // 16/32-Bit Timer 0A
#define INT_TIMER0B             36          // 16/32-Bit Timer 0B
#define INT_TIMER1A             37          // 16/32-Bit Timer 1A
#define INT_TIMER1B             38          // 16/32-Bit Timer 1B
#define INT_TIMER2A             39          // 16/32-Bit Timer 2A
#define INT_TIMER2B             40          // 16/32-Bit Timer 2B
#define INT_COMP0               41          // Analog Comparator 0
#define INT_COMP1               42          // Analog Comparator 1
#define INT_SYSCTL              44          // System Control
#define INT_FLASH               45          // Flash Memory Control and EEPROM
                                            // Control
#define INT_GPIOF               46          // GPIO Port F
#define INT_GPIOG               47          // GPIO Port G
#define INT_UART2               49          // UART2
#define INT_SSI1                50          // SSI1
#define INT_TIMER3A             51          // 16/32-Bit Timer 3A
#define INT_TIMER3B             52          // Timer 3B
#define INT_I2C1                53          // I2C1
#define INT_CAN0                55          // CAN0
#define INT_UDMA                62          // uDMA Software
#define INT_UDMAERR             63          // uDMA Error
#define INT_ADC1SS0             64          // ADC1 Sequence 0
#define INT_ADC1SS1             65          // ADC1 Sequence 1
#define INT_ADC1SS2             66          // ADC1 Sequence 2
#define INT_ADC1SS3             67          // ADC1 Sequence 3
#define INT_SSI2                73          // SSI2
#define INT_SSI3                74          // SSI3
#define INT_UART3               75          // UART3
#define INT_UART4               76          // UART4
#define INT_UART5               77          // UART5
#define INT_UART6               78          // UART6
#define INT_UART7               79          // UART7
#define INT_I2C2                84          // I2C2
#define INT_I2C3                85          // I2C3
#define INT_TIMER4A             86          // 16/32-Bit Timer 4A
#define INT_TIMER4B             87          // 16/32-Bit Timer 4B
#define INT_TIMER5A             108         // 16/32-Bit Timer 5A
#define INT_TIMER5B             109         // 16/32-Bit Timer 5B
#define INT_WTIMER0A            110         // 32/64-Bit Timer 0A
#define INT_WTIMER0B            111         // 32/64-Bit Timer 0B
#define INT_WTIMER1A            112         // 32/64-Bit Timer 1A
#define INT_WTIMER1B            113         // 32/64-Bit Timer 1B
#define INT_WTIMER2A            114         // 32/64-Bit Timer 2A
#define INT_WTIMER2B            115         // 32/64-Bit Timer 2B
#define INT_WTIMER3A            116         // 32/64-Bit Timer 3A
#define INT_WTIMER3B            117         // 32/64-Bit Timer 3B
#define INT_WTIMER4A            118         // 32/64-Bit Timer 4A
#define INT_WTIMER4B            119         // 32/64-Bit Timer 4B
#define INT_WTIMER5A            120         // 32/64-Bit Timer 5A
#define INT_WTIMER5B            121         // 32/64-Bit Timer 5B
#define INT_SYSEXC              122         // System Exception (imprecise)
#define INT_I2C4                125         // I2C4
#define INT_I2C5                126         // I2C5

//*****************************************************************************
//
// Watchdog Timer registers (WATCHDOG0)
//
//*****************************************************************************
#define WATCHDOG0_LOAD_R        (*((volatile uint32_t *)0x40000000))
#define WATCHDOG0_VALUE_R       (*((volatile uint32_t *)0x40000004))
#define WATCHDOG0_CTL_R         (*((volatile uint32_t *)0x40000008))
#define WATCHDOG0_ICR_R         (*((volatile uint32_t *)0x4000000C))
#define WATCHDOG0_RIS_R         (*((volatile uint32_t *)0x40000010))
#define WATCHDOG0_MIS_R         (*((volatile uint32_t *)0x40000014))
#define WATCHDOG0_TEST_R        (*((volatile uint32_t *)0x40000418))
#define WATCHDOG0_LOCK_R        (*((volatile uint32_t *)0x40000C00))

//*****************************************************************************
//
// Watchdog Timer registers (WATCHDOG1)
//
//*****************************************************************************
#define WATCHDOG1_LOAD_R        (*((volatile uint32_t *)0x40001000))
#define WATCHDOG1_VALUE_R       (*((volatile uint32_t *)0x40001004))
#define WATCHDOG1_CTL_R         (*((volatile uint32_t *)0x40001008))
#define WATCHDOG1_ICR_R         (*((volatile uint32_t *)0x4000100C))
#define WATCHDOG1_RIS_R         (*((volatile uint32_t *)0x40001010))
#define WATCHDOG1_MIS_R         (*((volatile uint32_t *)0x40001014))
#define WATCHDOG1_TEST_R        (*((volatile uint32_t *)0x40001418))
#define WATCHDOG1_LOCK_R        (*((volatile uint32_t *)0x40001C00))

//*****************************************************************************
//
// GPIO registers (PORTA)
//
//*****************************************************************************
#define GPIO_PORTA_DATA_BITS_R  ((volatile uint32_t *)0x40004000)
#define GPIO_PORTA_DATA_R       (*((volatile uint32_t *)0x400043FC))
#define GPIO_PORTA_DIR_R        (*((volatile uint32_t *)0x40004400))
#define GPIO_PORTA_IS_R         (*((volatile uint32_t *)0x40004404))
#define GPIO_PORTA_IBE_R        (*((volatile uint32_t *)0x40004408))
#define GPIO_PORTA_IEV_R        (*((volatile uint32_t *)0x4000440C))
#define GPIO_PORTA_IM_R         (*((volatile uint32_t *)0x40004410))
#define GPIO_PORTA_RIS_R        (*((volatile uint32_t *)0x40004414))
#define GPIO_PORTA_MIS_R        (*((volatile uint32_t *)0x40004418))
#define GPIO_PORTA_ICR_R        (*((volatile uint32_t *)0x4000441C))
#define GPIO_PORTA_AFSEL_R      (*((volatile uint32_t *)0x40004420))
#define GPIO_PORTA_DR2R_R       (*((volatile uint32_t *)0x40004500))
#define GPIO_PORTA_DR4R_R       (*((volatile uint32_t *)0x40004504))
#define GPIO_PORTA_DR8R_R       (*((volatile uint32_t *)0x40004508))
#define GPIO_PORTA_ODR_R        (*((volatile uint32_t *)0x4000450C))
#define GPIO_PORTA_PUR_R        (*((volatile uint32_t *)0x40004510))
#define GPIO_PORTA_PDR_R        (*((volatile uint32_t *)0x40004514))
#define GPIO_PORTA_SLR_R        (*((volatile uint32_t *)0x40004518))
#define GPIO_PORTA_DEN_R        (*((volatile uint32_t *)0x4000451C))
#define GPIO_PORTA_LOCK_R       (*((volatile uint32_t *)0x40004520))
#define GPIO_PORTA_CR_R         (*((volatile uint32_t *)0x40004524))
#define GPIO_PORTA_AMSEL_R      (*((volatile uint32_t *)0x40004528))
#define GPIO_PORTA_PCTL_R       (*((volatile uint32_t *)0x4000452C))
#define GPIO_PORTA_ADCCTL_R     (*((volatile uint32_t *)0x40004530))
#define GPIO_PORTA_DMACTL_R     (*((volatile uint32_t *)0x40004534))

//*****************************************************************************
//
// GPIO registers (PORTB)
//
//*****************************************************************************
#define GPIO_PORTB_DATA_BITS_R  ((volatile uint32_t *)0x40005000)
#define GPIO_PORTB_DATA_R       (*((volatile uint32_t *)0x400053FC))
#define GPIO_PORTB_DIR_R        (*((volatile uint32_t *)0x40005400))
#define GPIO_PORTB_IS_R         (*((volatile uint32_t *)0x40005404))
#define GPIO_PORTB_IBE_R        (*((volatile uint32_t *)0x40005408))
#define GPIO_PORTB_IEV_R        (*((volatile uint32_t *)0x4000540C))
#define GPIO_PORTB_IM_R         (*((volatile uint32_t *)0x40005410))
#define GPIO_PORTB_RIS_R        (*((volatile uint32_t *)0x40005414))
#define GPIO_PORTB_MIS_R        (*((volatile uint32_t *)0x40005418))
#define GPIO_PORTB_ICR_R        (*((volatile uint32_t *)0x4000541C))
#define GPIO_PORTB_AFSEL_R      (*((volatile uint32_t *)0x40005420))
#define GPIO_PORTB_DR2R_R       (*((volatile uint32_t *)0x40005500))
#define GPIO_PORTB_DR4R_R       (*((volatile uint32_t *)0x40005504))
#define GPIO_PORTB_DR8R_R       (*((volatile uint32_t *)0x40005508))
#define GPIO_PORTB_ODR_R        (*((volatile uint32_t *)0x4000550C))
#define GPIO_PORTB_PUR_R        (*((volatile uint32_t *)0x40005510))
#define GPIO_PORTB_PDR_R        (*((volatile uint32_t *)0x40005514))
#define GPIO_PORTB_SLR_R        (*((volatile uint32_t *)0x40005518))
#define GPIO_PORTB_DEN_R        (*((volatile uint32_t *)0x4000551C))
#define GPIO_PORTB_LOCK_R       (*((volatile uint32_t *)0x40005520))
#define GPIO_PORTB_CR_R         (*((volatile uint32_t *)0x40005524))
#define GPIO_PORTB_AMSEL_R      (*((volatile uint32_t *)0x40005528))
#define GPIO_PORTB_PCTL_R       (*((volatile uint32_t *)0x4000552C))
#define GPIO_PORTB_ADCCTL_R     (*((volatile uint32_t *)0x40005530))
#define GPIO_PORTB_DMACTL_R     (*((volatile uint32_t *)0x40005534))

//*****************************************************************************
//
// GPIO registers (PORTC)
//
//*****************************************************************************
#define GPIO_PORTC_DATA_BITS_R  ((volatile uint32_t *)0x40006000)
#define GPIO_PORTC_DATA_R       (*((volatile uint32_t *)0x400063FC))
#define GPIO_PORTC_DIR_R        (*((volatile uint32_t *)0x40006400))
#define GPIO_PORTC_IS_R         (*((volatile uint32_t *)0x40006404))
#define GPIO_PORTC_IBE_R        (*((volatile uint32_t *)0x40006408))
#define GPIO_PORTC_IEV_R        (*((volatile uint32_t *)0x4000640C))
#define GPIO_PORTC_IM_R         (*((volatile uint32_t *)0x40006410))
#define GPIO_PORTC_RIS_R        (*((volatile uint32_t *)0x40006414))
#define GPIO_PORTC_MIS_R        (*((volatile uint32_t *)0x40006418))
#define GPIO_PORTC_ICR_R        (*((volatile uint32_t *)0x4000641C))
#define GPIO_PORTC_AFSEL_R      (*((volatile uint32_t *)0x40006420))
#define GPIO_PORTC_DR2R_R       (*((volatile uint32_t *)0x40006500))
#define GPIO_PORTC_DR4R_R       (*((volatile uint32_t *)0x40006504))
#define GPIO_PORTC_DR8R_R       (*((volatile uint32_t *)0x40006508))
#define GPIO_PORTC_ODR_R        (*((volatile uint32_t *)0x4000650C))
#define GPIO_PORTC_PUR_R        (*((volatile uint32_t *)0x40006510))
#define GPIO_PORTC_PDR_R        (*((volatile uint32_t *)0x40006514))
#define GPIO_PORTC_SLR_R        (*((volatile uint32_t *)0x40006518))
#define GPIO_PORTC_DEN_R        (*((volatile uint32_t *)0x4000651C))
#define GPIO_PORTC_LOCK_R       (*((volatile uint32_t *)0x40006520))
#define GPIO_PORTC_CR_R         (*((volatile uint32_t *)0x40006524))
#define GPIO_PORTC_AMSEL_R      (*((volatile uint32_t *)0x40006528))
#define GPIO_PORTC_PCTL_R       (*((volatile uint32_t *)0x4000652C))
#define GPIO_PORTC_ADCCTL_R     (*((volatile uint32_t *)0x40006530))
#define GPIO_PORTC_DMACTL_R     (*((volatile uint32_t *)0x40006534))

//*****************************************************************************
//
// GPIO registers (PORTD)
//
//*****************************************************************************
#define GPIO_PORTD_DATA_BITS_R  ((volatile uint32_t *)0x40007000)
#define GPIO_PORTD_DATA_R       (*((volatile uint32_t *)0x400073FC))
#define GPIO_PORTD_DIR_R        (*((volatile uint32_t *)0x40007400))
#define GPIO_PORTD_IS_R         (*((volatile uint32_t *)0x40007404))
#define GPIO_PORTD_IBE_R        (*((volatile uint32_t *)0x40007408))
#define GPIO_PORTD_IEV_R        (*((volatile uint32_t *)0x4000740C))
#define GPIO_PORTD_IM_R         (*((volatile uint32_t *)0x40007410))
#define GPIO_PORTD_RIS_R        (*((volatile uint32_t *)0x40007414))
#define GPIO_PORTD_MIS_R        (*((volatile uint32_t *)0x40007418))
#define GPIO_PORTD_ICR_R        (*((volatile uint32_t *)0x4000741C))
#define GPIO_PORTD_AFSEL_R      (*((volatile uint32_t *)0x40007420))
#define GPIO_PORTD_DR2R_R       (*((volatile uint32_t *)0x40007500))
#define GPIO_PORTD_DR4R_R       (*((volatile uint32_t *)0x40007504))
#define GPIO_PORTD_DR8R_R       (*((volatile uint32_t *)0x40007508))
#define GPIO_PORTD_ODR_R        (*((volatile uint32_t *)0x4000750C))
#define GPIO_PORTD_PUR_R        (*((volatile uint32_t *)0x40007510))
#define GPIO_PORTD_PDR_R        (*((volatile uint32_t *)0x40007514))
#define GPIO_PORTD_SLR_R        (*((volatile uint32_t *)0x40007518))
#define GPIO_PORTD_DEN_R        (*((volatile uint32_t *)0x4000751C))
#define GPIO_PORTD_LOCK_R       (*((volatile uint32_t *)0x40007520))
#define GPIO_PORTD_CR_R         (*((volatile uint32_t *)0x40007524))
#define GPIO_PORTD_AMSEL_R      (*((volatile uint32_t *)0x40007528))
#define GPIO_PORTD_PCTL_R       (*((volatile uint32_t *)0x4000752C))
#define GPIO_PORTD_ADCCTL_R     (*((volatile uint32_t *)0x40007530))
#define GPIO_PORTD_DMACTL_R     (*((volatile uint32_t *)0x40007534))

//*****************************************************************************
//
// SSI registers (SSI0)
//
//*****************************************************************************
#define SSI0_CR0_R              (*((volatile uint32_t *)0x40008000))
#define SSI0_CR1_R              (*((volatile uint32_t *)0x40008004))
#define SSI0_DR_R               (*((volatile uint32_t *)0x40008008))
#define SSI0_SR_R               (*((volatile uint32_t *)0x4000800C))
#define SSI0_CPSR_R             (*((volatile uint32_t *)0x40008010))
#define SSI0_IM_R               (*((volatile uint32_t *)0x40008014))
#define SSI0_RIS_R              (*((volatile uint32_t *)0x40008018))
#define SSI0_MIS_R              (*((volatile uint32_t *)0x4000801C))
#define SSI0_ICR_R              (*((volatile uint32_t *)0x40008020))
#define SSI0_DMACTL_R           (*((volatile uint32_t *)0x40008024))
#define SSI0_CC_R               (*((volatile uint32_t *)0x40008FC8))

//*****************************************************************************
//
// SSI registers (SSI1)
//
//*****************************************************************************
#define SSI1_CR0_R              (*((volatile uint32_t *)0x40009000))
#define SSI1_CR1_R              (*((volatile uint32_t *)0x40009004))
#define SSI1_DR_R               (*((volatile uint32_t *)0x40009008))
#define SSI1_SR_R               (*((volatile uint32_t *)0x4000900C))
#define SSI1_CPSR_R             (*((volatile uint32_t *)0x40009010))
#define SSI1_IM_R               (*((volatile uint32_t *)0x40009014))
#define SSI1_RIS_R              (*((volatile uint32_t *)0x40009018))
#define SSI1_MIS_R              (*((volatile uint32_t *)0x4000901C))
#define SSI1_ICR_R              (*((volatile uint32_t *)0x40009020))
#define SSI1_DMACTL_R           (*((volatile uint32_t *)0x40009024))
#define SSI1_CC_R               (*((volatile uint32_t *)0x40009FC8))

//*****************************************************************************
//
// SSI registers (SSI2)
//
//*****************************************************************************
#define SSI2_CR0_R              (*((volatile uint32_t *)0x4000A000))
#define SSI2_CR1_R              (*((volatile uint32_t *)0x4000A004))
#define SSI2_DR_R               (*((volatile uint32_t *)0x4000A008))
#define SSI2_SR_R               (*((volatile uint32_t *)0x4000A00C))
#define SSI2_CPSR_R             (*((volatile uint32_t *)0x4000A010))
#define SSI2_IM_R               (*((volatile uint32_t *)0x4000A014))
#define SSI2_RIS_R              (*((volatile uint32_t *)0x4000A018))
#define SSI2_MIS_R              (*((volatile uint32_t *)0x4000A01C))
#define SSI2_ICR_R              (*((volatile uint32_t *)0x4000A020))
#define SSI2_DMACTL_R           (*((volatile uint32_t *)0x4000A024))
#define SSI2_CC_R               (*((volatile uint32_t *)0x4000AFC8))

//*****************************************************************************
//
// SSI registers (SSI3)
//
//*****************************************************************************
#define SSI3_CR0_R              (*((volatile uint32_t *)0x4000B000))
#define SSI3_CR1_R              (*((volatile uint32_t *)0x4000B004))
#define SSI3_DR_R               (*((volatile uint32_t *)0x4000B008))
#define SSI3_SR_R               (*((volatile uint32_t *)0x4000B00C))
#define SSI3_CPSR_R             (*((volatile uint32_t *)0x4000B010))
#define SSI3_IM_R               (*((volatile uint32_t *)0x4000B014))
#define SSI3_RIS_R              (*((volatile uint32_t *)0x4000B018))
#define SSI3_MIS_R              (*((volatile uint32_t *)0x4000B01C))
#define SSI3_ICR_R              (*((volatile uint32_t *)0x4000B020))
#define SSI3_DMACTL_R           (*((volatile uint32_t *)0x4000B024))
#define SSI3_CC_R               (*((volatile uint32_t *)0x4000BFC8))

//*****************************************************************************
//
// UART registers (UART0)
//
//*****************************************************************************
#define UART0_DR_R              (*((volatile uint32_t *)0x4000C000))
#define UART0_RSR_R             (*((volatile uint32_t *)0x4000C004))
#define UART0_ECR_R             (*((volatile uint32_t *)0x4000C004))
#define UART0_FR_R              (*((volatile uint32_t *)0x4000C018))
#define UART0_ILPR_R            (*((volatile uint32_t *)0x4000C020))
#define UART0_IBRD_R            (*((volatile uint32_t *)0x4000C024))
#define UART0_FBRD_R            (*((volatile uint32_t *)0x4000C028))
#define UART0_LCRH_R            (*((volatile uint32_t *)0x4000C02C))
#define UART0_CTL_R             (*((volatile uint32_t *)0x4000C030))
#define UART0_IFLS_R            (*((volatile uint32_t *)0x4000C034))
#define UART0_IM_R              (*((volatile uint32_t *)0x4000C038))
#define UART0_RIS_R             (*((volatile uint32_t *)0x4000C03C))
#define UART0_MIS_R             (*((volatile uint32_t *)0x4000C040))
#define UART0_ICR_R             (*((volatile uint32_t *)0x4000C044))
#define UART0_DMACTL_R          (*((volatile uint32_t *)0x4000C048))
#define UART0_9BITADDR_R        (*((volatile uint32_t *)0x4000C0A4))
#define UART0_9BITAMASK_R       (*((volatile uint32_t *)0x4000C0A8))
#define UART0_PP_R              (*((volatile uint32_t *)0x4000CFC0))
#define UART0_CC_R              (*((volatile uint32_t *)0x4000CFC8))

//*****************************************************************************
//
// UART registers (UART1)
//
//*****************************************************************************
#define UART1_DR_R              (*((volatile uint32_t *)0x4000D000))
#define UART1_RSR_R             (*((volatile uint32_t *)0x4000D004))
#define UART1_ECR_R             (*((volatile uint32_t *)0x4000D004))
#define UART1_FR_R              (*((volatile uint32_t *)0x4000D018))
#define UART1_ILPR_R            (*((volatile uint32_t *)0x4000D020))
#define UART1_IBRD_R            (*((volatile uint32_t *)0x4000D024))
#define UART1_FBRD_R            (*((volatile uint32_t *)0x4000D028))
#define UART1_LCRH_R            (*((volatile uint32_t *)0x4000D02C))
#define UART1_CTL_R             (*((volatile uint32_t *)0x4000D030))
#define UART1_IFLS_R            (*((volatile uint32_t *)0x4000D034))
#define UART1_IM_R              (*((volatile uint32_t *)0x4000D038))
#define UART1_RIS_R             (*((volatile uint32_t *)0x4000D03C))
#define UART1_MIS_R             (*((volatile uint32_t *)0x4000D040))
#define UART1_ICR_R             (*((volatile uint32_t *)0x4000D044))
#define UART1_DMACTL_R          (*((volatile uint32_t *)0x4000D048))
#define UART1_9BITADDR_R        (*((volatile uint32_t *)0x4000D0A4))
#define UART1_9BITAMASK_R       (*((volatile uint32_t *)0x4000D0A8))
#define UART1_PP_R              (*((volatile uint32_t *)0x4000DFC0))
#define UART1_CC_R              (*((volatile uint32_t *)0x4000DFC8))

//*****************************************************************************
//
// UART registers (UART2)
//
//*****************************************************************************
#define UART2_DR_R              (*((volatile uint32_t *)0x4000E000))
#define UART2_RSR_R             (*((volatile uint32_t *)0x4000E004))
#define UART2_ECR_R             (*((volatile uint32_t *)0x4000E004))
#define UART2_FR_R              (*((volatile uint32_t *)0x4000E018))
#define UART2_ILPR_R            (*((volatile uint32_t *)0x4000E020))
#define UART2_IBRD_R            (*((volatile uint32_t *)0x4000E024))
#define UART2_FBRD_R            (*((volatile uint32_t *)0x4000E028))
#define UART2_LCRH_R            (*((volatile uint32_t *)0x4000E02C))
#define UART2_CTL_R             (*((volatile uint32_t *)0x4000E030))
#define UART2_IFLS_R            (*((volatile uint32_t *)0x4000E034))
#define UART2_IM_R              (*((volatile uint32_t *)0x4000E038))
#define UART2_RIS_R             (*((volatile uint32_t *)0x4000E03C))
#define UART2_MIS_R             (*((volatile uint32_t *)0x4000E040))
#define UART2_ICR_R             (*((volatile uint32_t *)0x4000E044))
#define UART2_DMACTL_R          (*((volatile uint32_t *)0x4000E048))
#define UART2_9BITADDR_R        (*((volatile uint32_t *)0x4000E0A4))
#define UART2_9BITAMASK_R       (*((volatile uint32_t *)0x4000E0A8))
#define UART2_PP_R              (*((volatile uint32_t *)0x4000EFC0))
#define UART2_CC_R              (*((volatile uint32_t *)0x4000EFC8))

//*****************************************************************************
//
// UART registers (UART3)
//
//*****************************************************************************
#define UART3_DR_R              (*((volatile uint32_t *)0x4000F000))
#define UART3_RSR_R             (*((volatile uint32_t *)0x4000F004))
#define UART3_ECR_R             (*((volatile uint32_t *)0x4000F004))
#define UART3_FR_R              (*((volatile uint32_t *)0x4000F018))
#define UART3_ILPR_R            (*((volatile uint32_t *)0x4000F020))
#define UART3_IBRD_R            (*((volatile uint32_t *)0x4000F024))
#define UART3_FBRD_R            (*((volatile uint32_t *)0x4000F028))
#define UART3_LCRH_R            (*((volatile uint32_t *)0x4000F02C))
#define UART3_CTL_R             (*((volatile uint32_t *)0x4000F030))
#define UART3_IFLS_R            (*((volatile uint32_t *)0x4000F034))
#define UART3_IM_R              (*((volatile uint32_t *)0x4000F038))
#define UART3_RIS_R             (*((volatile uint32_t *)0x4000F03C))
#define UART3_MIS_R             (*((volatile uint32_t *)0x4000F040))
#define UART3_ICR_R             (*((volatile uint32_t *)0x4000F044))
#define UART3_DMACTL_R          (*((volatile uint32_t *)0x4000F048))
#define UART3_9BITADDR_R        (*((volatile uint32_t *)0x4000F0A4))
#define UART3_9BITAMASK_R       (*((volatile uint32_t *)0x4000F0A8))
#define UART3_PP_R              (*((volatile uint32_t *)0x4000FFC0))
#define UART3_CC_R              (*((volatile uint32_t *)0x4000FFC8))

//*****************************************************************************
//
// UART registers (UART4)
//
//*****************************************************************************
#define UART4_DR_R              (*((volatile uint32_t *)0x40010000))
#define UART4_RSR_R             (*((volatile uint32_t *)0x40010004))
#define UART4_ECR_R             (*((volatile uint32_t *)0x40010004))
#define UART4_FR_R              (*((volatile uint32_t *)0x40010018))
#define UART4_ILPR_R            (*((volatile uint32_t *)0x40010020))
#define UART4_IBRD_R            (*((volatile uint32_t *)0x40010024))
#define UART4_FBRD_R            (*((volatile uint32_t *)0x40010028))
#define UART4_LCRH_R            (*((volatile uint32_t *)0x4001002C))
#define UART4_CTL_R             (*((volatile uint32_t *)0x40010030))
#define UART4_IFLS_R            (*((volatile uint32_t *)0x40010034))
#define UART4_IM_R              (*((volatile uint32_t *)0x40010038))
#define UART4_RIS_R             (*((volatile uint32_t *)0x4001003C))
#define UART4_MIS_R             (*((volatile uint32_t *)0x40010040))
#define UART4_ICR_R             (*((volatile uint32_t *)0x40010044))
#define UART4_DMACTL_R          (*((volatile uint32_t *)0x40010048))
#define UART4_9BITADDR_R        (*((volatile uint32_t *)0x400100A4))
#define UART4_9BITAMASK_R       (*((volatile uint32_t *)0x400100A8))
#define UART4_PP_R              (*((volatile uint32_t *)0x40010FC0))
#define UART4_CC_R              (*((volatile uint32_t *)0x40010FC8))

//*****************************************************************************
//
// UART registers (UART5)
//
//*****************************************************************************
#define UART5_DR_R              (*((volatile uint32_t *)0x40011000))
#define UART5_RSR_R             (*((volatile uint32_t *)0x40011004))
#define UART5_ECR_R             (*((volatile uint32_t *)0x40011004))
#define UART5_FR_R              (*((volatile uint32_t *)0x40011018))
#define UART5_ILPR_R            (*((volatile uint32_t *)0x40011020))
#define UART5_IBRD_R            (*((volatile uint32_t *)0x40011024))
#define UART5_FBRD_R            (*((volatile uint32_t *)0x40011028))
#define UART5_LCRH_R            (*((volatile uint32_t *)0x4001102C))
#define UART5_CTL_R             (*((volatile uint32_t *)0x40011030))
#define UART5_IFLS_R            (*((volatile uint32_t *)0x40011034))
#define UART5_IM_R              (*((volatile uint32_t *)0x40011038))
#define UART5_RIS_R             (*((volatile uint32_t *)0x4001103C))
#define UART5_MIS_R             (*((volatile uint32_t *)0x40011040))
#define UART5_ICR_R             (*((volatile uint32_t *)0x40011044))
#define UART5_DMACTL_R          (*((volatile uint32_t *)0x40011048))
#define UART5_9BITADDR_R        (*((volatile uint32_t *)0x400110A4))
#define UART5_9BITAMASK_R       (*((volatile uint32_t *)0x400110A8))
#define UART5_PP_R              (*((volatile uint32_t *)0x40011FC0))
#define UART5_CC_R              (*((volatile uint32_t *)0x40011FC8))

//*****************************************************************************
//
// UART registers (UART6)
//
//*****************************************************************************
#define UART6_DR_R              (*((volatile uint32_t *)0x40012000))
#define UART6_RSR_R             (*((volatile uint32_t *)0x40012004))
#define UART6_ECR_R             (*((volatile uint32_t *)0x40012004))
#define UART6_FR_R              (*((volatile uint32_t *)0x40012018))
#define UART6_ILPR_R            (*((volatile uint32_t *)0x40012020))
#define UART6_IBRD_R            (*((volatile uint32_t *)0x40012024))
#define UART6_FBRD_R            (*((volatile uint32_t *)0x40012028))
#define UART6_LCRH_R            (*((volatile uint32_t *)0x4001202C))
#define UART6_CTL_R             (*((volatile uint32_t *)0x40012030))
#define UART6_IFLS_R            (*((volatile uint32_t *)0x40012034))
#define UART6_IM_R              (*((volatile uint32_t *)0x40012038))
#define UART6_RIS_R             (*((volatile uint32_t *)0x4001203C))
#define UART6_MIS_R             (*((volatile uint32_t *)0x40012040))
#define UART6_ICR_R             (*((volatile uint32_t *)0x40012044))
#define UART6_DMACTL_R          (*((volatile uint32_t *)0x40012048))
#define UART6_9BITADDR_R        (*((volatile uint32_t *)0x400120A4))
#define UART6_9BITAMASK_R       (*((volatile uint32_t *)0x400120A8))
#define UART6_PP_R              (*((volatile uint32_t *)0x40012FC0))
#define UART6_CC_R              (*((volatile uint32_t *)0x40012FC8))

//*****************************************************************************
//
// UART registers (UART7)
//
//*****************************************************************************
#define UART7_DR_R              (*((volatile uint32_t *)0x40013000))
#define UART7_RSR_R             (*((volatile uint32_t *)0x40013004))
#define UART7_ECR_R             (*((volatile uint32_t *)0x40013004))
#define UART7_FR_R              (*((volatile uint32_t *)0x40013018))
#define UART7_ILPR_R            (*((volatile uint32_t *)0x40013020))
#define UART7_IBRD_R            (*((volatile uint32_t *)0x40013024))
#define UART7_FBRD_R            (*((volatile uint32_t *)0x40013028))
#define UART7_LCRH_R            (*((volatile uint32_t *)0x4001302C))
#define UART7_CTL_R             (*((volatile uint32_t *)0x40013030))
#define UART7_IFLS_R            (*((volatile uint32_t *)0x40013034))
#define UART7_IM_R              (*((volatile uint32_t *)0x40013038))
#define UART7_RIS_R             (*((volatile uint32_t *)0x4001303C))
#define UART7_MIS_R             (*((volatile uint32_t *)0x40013040))
#define UART7_ICR_R             (*((volatile uint32_t *)0x40013044))
#define UART7_DMACTL_R          (*((volatile uint32_t *)0x40013048))
#define UART7_9BITADDR_R        (*((volatile uint32_t *)0x400130A4))
#define UART7_9BITAMASK_R       (*((volatile uint32_t *)0x400130A8))
#define UART7_PP_R              (*((volatile uint32_t *)0x40013FC0))
#define UART7_CC_R              (*((volatile uint32_t *)0x40013FC8))

//*****************************************************************************
//
// I2C registers (I2C0)
//
//*****************************************************************************
#define I2C0_MSA_R              (*((volatile uint32_t *)0x40020000))
#define I2C0_MCS_R              (*((volatile uint32_t *)0x40020004))
#define I2C0_MDR_R              (*((volatile uint32_t *)0x40020008))
#define I2C0_MTPR_R             (*((volatile uint32_t *)0x4002000C))
#define I2C0_MIMR_R             (*((volatile uint32_t *)0x40020010))
#define I2C0_MRIS_R             (*((volatile uint32_t *)0x40020014))
#define I2C0_MMIS_R             (*((volatile uint32_t *)0x40020018))
#define I2C0_MICR_R             (*((volatile uint32_t *)0x4002001C))
#define I2C0_MCR_R              (*((volatile uint32_t *)0x40020020))
#define I2C0_MCLKOCNT_R         (*((volatile uint32_t *)0x40020024))
#define I2C0_MBMON_R            (*((volatile uint32_t *)0x4002002C))
#define I2C0_MCR2_R             (*((volatile uint32_t *)0x40020038))
#define I2C0_SOAR_R             (*((volatile uint32_t *)0x40020800))
#define I2C0_SCSR_R             (*((volatile uint32_t *)0x40020804))
#define I2C0_SDR_R              (*((volatile uint32_t *)0x40020808))
#define I2C0_SIMR_R             (*((volatile uint32_t *)0x4002080C))
#define I2C0_SRIS_R             (*((volatile uint32_t *)0x40020810))
#define I2C0_SMIS_R             (*((volatile uint32_t *)0x40020814))
#define I2C0_SICR_R             (*((volatile uint32_t *)0x40020818))
#define I2C0_SOAR2_R            (*((volatile uint32_t *)0x4002081C))
#define I2C0_SACKCTL_R          (*((volatile uint32_t *)0x40020820))
#define I2C0_PP_R               (*((volatile uint32_t *)0x40020FC0))
#define I2C0_PC_R               (*((volatile uint32_t *)0x40020FC4))

//*****************************************************************************
//
// I2C registers (I2C1)
//
//*****************************************************************************
#define I2C1_MSA_R              (*((volatile uint32_t *)0x40021000))
#define I2C1_MCS_R              (*((volatile uint32_t *)0x40021004))
#define I2C1_MDR_R              (*((volatile uint32_t *)0x40021008))
#define I2C1_MTPR_R             (*((volatile uint32_t *)0x4002100C))
#define I2C1_MIMR_R             (*((volatile uint32_t *)0x40021010))
#define I2C1_MRIS_R             (*((volatile uint32_t *)0x40021014))
#define I2C1_MMIS_R             (*((volatile uint32_t *)0x40021018))
#define I2C1_MICR_R             (*((volatile uint32_t *)0x4002101C))
#define I2C1_MCR_R              (*((volatile uint32_t *)0x40021020))
#define I2C1_MCLKOCNT_R         (*((volatile uint32_t *)0x40021024))
#define I2C1_MBMON_R            (*((volatile uint32_t *)0x4002102C))
#define I2C1_MCR2_R             (*((volatile uint32_t *)0x40021038))
#define I2C1_SOAR_R             (*((volatile uint32_t *)0x40021800))
#define I2C1_SCSR_R             (*((volatile uint32_t *)0x40021804))
#define I2C1_SDR_R              (*((volatile uint32_t *)0x40021808))
#define I2C1_SIMR_R             (*((volatile uint32_t *)0x4002180C))
#define I2C1_SRIS_R             (*((volatile uint32_t *)0x40021810))
#define I2C1_SMIS_R             (*((volatile uint32_t *)0x40021814))
#define I2C1_SICR_R             (*((volatile uint32_t *)0x40021818))
#define I2C1_SOAR2_R            (*((volatile uint32_t *)0x4002181C))
#define I2C1_SACKCTL_R          (*((volatile uint32_t *)0x40021820))
#define I2C1_PP_R               (*((volatile uint32_t *)0x40021FC0))
#define I2C1_PC_R               (*((volatile uint32_t *)0x40021FC4))

//*****************************************************************************
//
// I2C registers (I2C2)
//
//*****************************************************************************
#define I2C2_MSA_R              (*((volatile uint32_t *)0x40022000))
#define I2C2_MCS_R              (*((volatile uint32_t *)0x40022004))
#define I2C2_MDR_R              (*((volatile uint32_t *)0x40022008))
#define I2C2_MTPR_R             (*((volatile uint32_t *)0x4002200C))
#define I2C2_MIMR_R             (*((volatile uint32_t *)0x40022010))
#define I2C2_MRIS_R             (*((volatile uint32_t *)0x40022014))
#define I2C2_MMIS_R             (*((volatile uint32_t *)0x40022018))
#define I2C2_MICR_R             (*((volatile uint32_t *)0x4002201C))
#define I2C2_MCR_R              (*((volatile uint32_t *)0x40022020))
#define I2C2_MCLKOCNT_R         (*((volatile uint32_t *)0x40022024))
#define I2C2_MBMON_R            (*((volatile uint32_t *)0x4002202C))
#define I2C2_MCR2_R             (*((volatile uint32_t *)0x40022038))
#define I2C2_SOAR_R             (*((volatile uint32_t *)0x40022800))
#define I2C2_SCSR_R             (*((volatile uint32_t *)0x40022804))
#define I2C2_SDR_R              (*((volatile uint32_t *)0x40022808))
#define I2C2_SIMR_R             (*((volatile uint32_t *)0x4002280C))
#define I2C2_SRIS_R             (*((volatile uint32_t *)0x40022810))
#define I2C2_SMIS_R             (*((volatile uint32_t *)0x40022814))
#define I2C2_SICR_R             (*((volatile uint32_t *)0x40022818))
#define I2C2_SOAR2_R            (*((volatile uint32_t *)0x4002281C))
#define I2C2_SACKCTL_R          (*((volatile uint32_t *)0x40022820))
#define I2C2_PP_R               (*((volatile uint32_t *)0x40022FC0))
#define I2C2_PC_R               (*((volatile uint32_t *)0x40022FC4))

//*****************************************************************************
//
// I2C registers (I2C3)
//
//*****************************************************************************
#define I2C3_MSA_R              (*((volatile uint32_t *)0x40023000))
#define I2C3_MCS_R              (*((volatile uint32_t *)0x40023004))
#define I2C3_MDR_R              (*((volatile uint32_t *)0x40023008))
#define I2C3_MTPR_R             (*((volatile uint32_t *)0x4002300C))
#define I2C3_MIMR_R             (*((volatile uint32_t *)0x40023010))
#define I2C3_MRIS_R             (*((volatile uint32_t *)0x40023014))
#define I2C3_MMIS_R             (*((volatile uint32_t *)0x40023018))
#define I2C3_MICR_R             (*((volatile uint32_t *)0x4002301C))
#define I2C3_MCR_R              (*((volatile uint32_t *)0x40023020))
#define I2C3_MCLKOCNT_R         (*((volatile uint32_t *)0x40023024))
#define I2C3_MBMON_R            (*((volatile uint32_t *)0x4002302C))
#define I2C3_MCR2_R             (*((volatile uint32_t *)0x40023038))
#define I2C3_SOAR_R             (*((volatile uint32_t *)0x40023800))
#define I2C3_SCSR_R             (*((volatile uint32_t *)0x40023804))
#define I2C3_SDR_R              (*((volatile uint32_t *)0x40023808))
#define I2C3_SIMR_R             (*((volatile uint32_t *)0x4002380C))
#define I2C3_SRIS_R             (*((volatile uint32_t *)0x40023810))
#define I2C3_SMIS_R             (*((volatile uint32_t *)0x40023814))
#define I2C3_SICR_R             (*((volatile uint32_t *)0x40023818))
#define I2C3_SOAR2_R            (*((volatile uint32_t *)0x4002381C))
#define I2C3_SACKCTL_R          (*((volatile uint32_t *)0x40023820))
#define I2C3_PP_R               (*((volatile uint32_t *)0x40023FC0))
#define I2C3_PC_R               (*((volatile uint32_t *)0x40023FC4))

//*****************************************************************************
//
// GPIO registers (PORTE)
//
//*****************************************************************************
#define GPIO_PORTE_DATA_BITS_R  ((volatile uint32_t *)0x40024000)
#define GPIO_PORTE_DATA_R       (*((volatile uint32_t *)0x400243FC))
#define GPIO_PORTE_DIR_R        (*((volatile uint32_t *)0x40024400))
#define GPIO_PORTE_IS_R         (*((volatile uint32_t *)0x40024404))
#define GPIO_PORTE_IBE_R        (*((volatile uint32_t *)0x40024408))
#define GPIO_PORTE_IEV_R        (*((volatile uint32_t *)0x4002440C))
#define GPIO_PORTE_IM_R         (*((volatile uint32_t *)0x40024410))
#define GPIO_PORTE_RIS_R        (*((volatile uint32_t *)0x40024414))
#define GPIO_PORTE_MIS_R        (*((volatile uint32_t *)0x40024418))
#define GPIO_PORTE_ICR_R        (*((volatile uint32_t *)0x4002441C))
#define GPIO_PORTE_AFSEL_R      (*((volatile uint32_t *)0x40024420))
#define GPIO_PORTE_DR2R_R       (*((volatile uint32_t *)0x40024500))
#define GPIO_PORTE_DR4R_R       (*((volatile uint32_t *)0x40024504))
#define GPIO_PORTE_DR8R_R       (*((volatile uint32_t *)0x40024508))
#define GPIO_PORTE_ODR_R        (*((volatile uint32_t *)0x4002450C))
#define GPIO_PORTE_PUR_R        (*((volatile uint32_t *)0x40024510))
#define GPIO_PORTE_PDR_R        (*((volatile uint32_t *)0x40024514))
#define GPIO_PORTE_SLR_R        (*((volatile uint32_t *)0x40024518))
#define GPIO_PORTE_DEN_R        (*((volatile uint32_t *)0x4002451C))
#define GPIO_PORTE_LOCK_R       (*((volatile uint32_t *)0x40024520))
#define GPIO_PORTE_CR_R         (*((volatile uint32_t *)0x40024524))
#define GPIO_PORTE_AMSEL_R      (*((volatile uint32_t *)0x40024528))
#define GPIO_PORTE_PCTL_R       (*((volatile uint32_t *)0x4002452C))
#define GPIO_PORTE_ADCCTL_R     (*((volatile uint32_t *)0x40024530))
#define GPIO_PORTE_DMACTL_R     (*((volatile uint32_t *)0x40024534))

//*****************************************************************************
//
// GPIO registers (PORTF)
//
//*****************************************************************************
#define GPIO_PORTF_DATA_BITS_R  ((volatile uint32_t *)0x40025000)
#define GPIO_PORTF_DATA_R       (*((volatile uint32_t *)0x400253FC))
#define GPIO_PORTF_DIR_R        (*((volatile uint32_t *)0x40025400))
#define GPIO_PORTF_IS_R         (*((volatile uint32_t *)0x40025404))
#define GPIO_PORTF_IBE_R        (*((volatile uint32_t *)0x40025408))
#define GPIO_PORTF_IEV_R        (*((volatile uint32_t *)0x4002540C))
#define GPIO_PORTF_IM_R         (*((volatile uint32_t *)0x40025410))
#define GPIO_PORTF_RIS_R        (*((volatile uint32_t *)0x40025414))
#define GPIO_PORTF_MIS_R        (*((volatile uint32_t *)0x40025418))
#define GPIO_PORTF_ICR_R        (*((volatile uint32_t *)0x4002541C))
#define GPIO_PORTF_AFSEL_R      (*((volatile uint32_t *)0x40025420))
#define GPIO_PORTF_DR2R_R       (*((volatile uint32_t *)0x40025500))
#define GPIO_PORTF_DR4R_R       (*((volatile uint32_t *)0x40025504))
#define GPIO_PORTF_DR8R_R       (*((volatile uint32_t *)0x40025508))
#define GPIO_PORTF_ODR_R        (*((volatile uint32_t *)0x4002550C))
#define GPIO_PORTF_PUR_R        (*((volatile uint32_t *)0x40025510))
#define GPIO_PORTF_PDR_R        (*((volatile uint32_t *)0x40025514))
#define GPIO_PORTF_SLR_R        (*((volatile uint32_t *)0x40025518))
#define GPIO_PORTF_DEN_R        (*((volatile uint32_t *)0x4002551C))
#define GPIO_PORTF_LOCK_R       (*((volatile uint32_t *)0x40025520))
#define GPIO_PORTF_CR_R         (*((volatile uint32_t *)0x40025524))
#define GPIO_PORTF_AMSEL_R      (*((volatile uint32_t *)0x40025528))
#define GPIO_PORTF_PCTL_R       (*((volatile uint32_t *)0x4002552C))
#define GPIO_PORTF_ADCCTL_R     (*((volatile uint32_t *)0x40025530))
#define GPIO_PORTF_DMACTL_R     (*((volatile uint32_t *)0x40025534))

//*****************************************************************************
//
// GPIO registers (PORTG)
//
//*****************************************************************************
#define GPIO_PORTG_DATA_BITS_R  ((volatile uint32_t *)0x40026000)
#define GPIO_PORTG_DATA_R       (*((volatile uint32_t *)0x400263FC))
#define GPIO_PORTG_DIR_R        (*((volatile uint32_t *)0x40026400))
#define GPIO_PORTG_IS_R         (*((volatile uint32_t *)0x40026404))
#define GPIO_PORTG_IBE_R        (*((volatile uint32_t *)0x40026408))
#define GPIO_PORTG_IEV_R        (*((volatile uint32_t *)0x4002640C))
#define GPIO_PORTG_IM_R         (*((volatile uint32_t *)0x40026410))
#define GPIO_PORTG_RIS_R        (*((volatile uint32_t *)0x40026414))
#define GPIO_PORTG_MIS_R        (*((volatile uint32_t *)0x40026418))
#define GPIO_PORTG_ICR_R        (*((volatile uint32_t *)0x4002641C))
#define GPIO_PORTG_AFSEL_R      (*((volatile uint32_t *)0x40026420))
#define GPIO_PORTG_DR2R_R       (*((volatile uint32_t *)0x40026500))
#define GPIO_PORTG_DR4R_R       (*((volatile uint32_t *)0x40026504))
#define GPIO_PORTG_DR8R_R       (*((volatile uint32_t *)0x40026508))
#define GPIO_PORTG_ODR_R        (*((volatile uint32_t *)0x4002650C))
#define GPIO_PORTG_PUR_R        (*((volatile uint32_t *)0x40026510))
#define GPIO_PORTG_PDR_R        (*((volatile uint32_t *)0x40026514))
#define GPIO_PORTG_SLR_R        (*((volatile uint32_t *)0x40026518))
#define GPIO_PORTG_DEN_R        (*((volatile uint32_t *)0x4002651C))
#define GPIO_PORTG_LOCK_R       (*((volatile uint32_t *)0x40026520))
#define GPIO_PORTG_CR_R         (*((volatile uint32_t *)0x40026524))
#define GPIO_PORTG_AMSEL_R      (*((volatile uint32_t *)0x40026528))
#define GPIO_PORTG_PCTL_R       (*((volatile uint32_t *)0x4002652C))
#define GPIO_PORTG_ADCCTL_R     (*((volatile uint32_t *)0x40026530))
#define GPIO_PORTG_DMACTL_R     (*((volatile uint32_t *)0x40026534))

//*****************************************************************************
//
// Timer registers (TIMER0)
//
//*****************************************************************************
#define TIMER0_CFG_R            (*((volatile uint32_t *)0x40030000))
#define TIMER0_TAMR_R           (*((volatile uint32_t *)0x40030004))
#define TIMER0_TBMR_R           (*((volatile uint32_t *)0x40030008))
#define TIMER0_CTL_R            (*((volatile uint32_t *)0x4003000C))
#define TIMER0_SYNC_R           (*((volatile uint32_t *)0x40030010))
#define TIMER0_IMR_R            (*((volatile uint32_t *)0x40030018))
#define TIMER0_RIS_R            (*((volatile uint32_t *)0x4003001C))
#define TIMER0_MIS_R            (*((volatile uint32_t *)0x40030020))
#define TIMER0_ICR_R            (*((volatile uint32_t *)0x40030024))
#define TIMER0_TAILR_R          (*((volatile uint32_t *)0x40030028))
#define TIMER0_TBILR_R          (*((volatile uint32_t *)0x4003002C))
#define TIMER0_TAMATCHR_R       (*((volatile uint32_t *)0x40030030))
#define TIMER0_TBMATCHR_R       (*((volatile uint32_t *)0x40030034))
#define TIMER0_TAPR_R           (*((volatile uint32_t *)0x40030038))
#define TIMER0_TBPR_R           (*((volatile uint32_t *)0x4003003C))
#define TIMER0_TAPMR_R          (*((volatile uint32_t *)0x40030040))
#define TIMER0_TBPMR_R          (*((volatile uint32_t *)0x40030044))
#define TIMER0_TAR_R            (*((volatile uint32_t *)0x40030048))
#define TIMER0_TBR_R            (*((volatile uint32_t *)0x4003004C))
#define TIMER0_TAV_R            (*((volatile uint32_t *)0x40030050))
#define TIMER0_TBV_R            (*((volatile uint32_t *)0x40030054))
#define TIMER0_RTCPD_R          (*((volatile uint32_t *)0x40030058))
#define TIMER0_TAPS_R           (*((volatile uint32_t *)0x4003005C))
#define TIMER0_TBPS_R           (*((volatile uint32_t *)0x40030060))
#define TIMER0_TAPV_R           (*((volatile uint32_t *)0x40030064))
#define TIMER0_TBPV_R           (*((volatile uint32_t *)0x40030068))
#define TIMER0_PP_R             (*((volatile uint32_t *)0x40030FC0))

//*****************************************************************************
//
// Timer registers (TIMER1)
//
//*****************************************************************************
#define TIMER1_CFG_R            (*((volatile uint32_t *)0x40031000))
#define TIMER1_TAMR_R           (*((volatile uint32_t *)0x40031004))
#define TIMER1_TBMR_R           (*((volatile uint32_t *)0x40031008))
#define TIMER1_CTL_R            (*((volatile uint32_t *)0x4003100C))
#define TIMER1_SYNC_R           (*((volatile uint32_t *)0x40031010))
#define TIMER1_IMR_R            (*((volatile uint32_t *)0x40031018))
#define TIMER1_RIS_R            (*((volatile uint32_t *)0x4003101C))
#define TIMER1_MIS_R            (*((volatile uint32_t *)0x40031020))
#define TIMER1_ICR_R            (*((volatile uint32_t *)0x40031024))
#define TIMER1_TAILR_R          (*((volatile uint32_t *)0x40031028))
#define TIMER1_TBILR_R          (*((volatile uint32_t *)0x4003102C))
#define TIMER1_TAMATCHR_R       (*((volatile uint32_t *)0x40031030))
#define TIMER1_TBMATCHR_R       (*((volatile uint32_t *)0x40031034))
#define TIMER1_TAPR_R           (*((volatile uint32_t *)0x40031038))
#define TIMER1_TBPR_R           (*((volatile uint32_t *)0x4003103C))
#define TIMER1_TAPMR_R          (*((volatile uint32_t *)0x40031040))
#define TIMER1_TBPMR_R          (*((volatile uint32_t *)0x40031044))
#define TIMER1_TAR_R            (*((volatile uint32_t *)0x40031048))
#define TIMER1_TBR_R            (*((volatile uint32_t *)0x4003104C))
#define TIMER1_TAV_R            (*((volatile uint32_t *)0x40031050))
#define TIMER1_TBV_R            (*((volatile uint32_t *)0x40031054))
#define TIMER1_RTCPD_R          (*((volatile uint32_t *)0x40031058))
#define TIMER1_TAPS_R           (*((volatile uint32_t *)0x4003105C))
#define TIMER1_TBPS_R           (*((volatile uint32_t *)0x40031060))
#define TIMER1_TAPV_R           (*((volatile uint32_t *)0x40031064))
#define TIMER1_TBPV_R           (*((volatile uint32_t *)0x40031068))
#define TIMER1_PP_R             (*((volatile uint32_t *)0x40031FC0))

//*****************************************************************************
//
// Timer registers (TIMER2)
//
//*****************************************************************************
#define TIMER2_CFG_R            (*((volatile uint32_t *)0x40032000))
#define TIMER2_TAMR_R           (*((volatile uint32_t *)0x40032004))
#define TIMER2_TBMR_R           (*((volatile uint32_t *)0x40032008))
#define TIMER2_CTL_R            (*((volatile uint32_t *)0x4003200C))
#define TIMER2_SYNC_R           (*((volatile uint32_t *)0x40032010))
#define TIMER2_IMR_R            (*((volatile uint32_t *)0x40032018))
#define TIMER2_RIS_R            (*((volatile uint32_t *)0x4003201C))
#define TIMER2_MIS_R            (*((volatile uint32_t *)0x40032020))
#define TIMER2_ICR_R            (*((volatile uint32_t *)0x40032024))
#define TIMER2_TAILR_R          (*((volatile uint32_t *)0x40032028))
#define TIMER2_TBILR_R          (*((volatile uint32_t *)0x4003202C))
#define TIMER2_TAMATCHR_R       (*((volatile uint32_t *)0x40032030))
#define TIMER2_TBMATCHR_R       (*((volatile uint32_t *)0x40032034))
#define TIMER2_TAPR_R           (*((volatile uint32_t *)0x40032038))
#define TIMER2_TBPR_R           (*((volatile uint32_t *)0x4003203C))
#define TIMER2_TAPMR_R          (*((volatile uint32_t *)0x40032040))
#define TIMER2_TBPMR_R          (*((volatile uint32_t *)0x40032044))
#define TIMER2_TAR_R            (*((volatile uint32_t *)0x40032048))
#define TIMER2_TBR_R            (*((volatile uint32_t *)0x4003204C))
#define TIMER2_TAV_R            (*((volatile uint32_t *)0x40032050))
#define TIMER2_TBV_R            (*((volatile uint32_t *)0x40032054))
#define TIMER2_RTCPD_R          (*((volatile uint32_t *)0x40032058))
#define TIMER2_TAPS_R           (*((volatile uint32_t *)0x4003205C))
#define TIMER2_TBPS_R           (*((volatile uint32_t *)0x40032060))
#define TIMER2_TAPV_R           (*((volatile uint32_t *)0x40032064))
#define TIMER2_TBPV_R           (*((volatile uint32_t *)0x40032068))
#define TIMER2_PP_R             (*((volatile uint32_t *)0x40032FC0))

//*****************************************************************************
//
// Timer registers (TIMER3)
//
//*****************************************************************************
#define TIMER3_CFG_R            (*((volatile uint32_t *)0x40033000))
#define TIMER3_TAMR_R           (*((volatile uint32_t *)0x40033004))
#define TIMER3_TBMR_R           (*((volatile uint32_t *)0x40033008))
#define TIMER3_CTL_R            (*((volatile uint32_t *)0x4003300C))
#define TIMER3_SYNC_R           (*((volatile uint32_t *)0x40033010))
#define TIMER3_IMR_R            (*((volatile uint32_t *)0x40033018))
#define TIMER3_RIS_R            (*((volatile uint32_t *)0x4003301C))
#define TIMER3_MIS_R            (*((volatile uint32_t *)0x40033020))
#define TIMER3_ICR_R            (*((volatile uint32_t *)0x40033024))
#define TIMER3_TAILR_R          (*((volatile uint32_t *)0x40033028))
#define TIMER3_TBILR_R          (*((volatile uint32_t *)0x4003302C))
#define TIMER3_TAMATCHR_R       (*((volatile uint32_t *)0x40033030))
#define TIMER3_TBMATCHR_R       (*((volatile uint32_t *)0x40033034))
#define TIMER3_TAPR_R           (*((volatile uint32_t *)0x40033038))
#define TIMER3_TBPR_R           (*((volatile uint32_t *)0x4003303C))
#define TIMER3_TAPMR_R          (*((volatile uint32_t *)0x40033040))
#define TIMER3_TBPMR_R          (*((volatile uint32_t *)0x40033044))
#define TIMER3_TAR_R            (*((volatile uint32_t *)0x40033048))
#define TIMER3_TBR_R            (*((volatile uint32_t *)0x4003304C))
#define TIMER3_TAV_R            (*((volatile uint32_t *)0x40033050))
#define TIMER3_TBV_R            (*((volatile uint32_t *)0x40033054))
#define TIMER3_RTCPD_R          (*((volatile uint32_t *)0x40033058))
#define TIMER3_TAPS_R           (*((volatile uint32_t *)0x4003305C))
#define TIMER3_TBPS_R           (*((volatile uint32_t *)0x40033060))
#define TIMER3_TAPV_R           (*((volatile uint32_t *)0x40033064))
#define TIMER3_TBPV_R           (*((volatile uint32_t *)0x40033068))
#define TIMER3_PP_R             (*((volatile uint32_t *)0x40033FC0))

//*****************************************************************************
//
// Timer registers (TIMER4)
//
//*****************************************************************************
#define TIMER4_CFG_R            (*((volatile uint32_t *)0x40034000))
#define TIMER4_TAMR_R           (*((volatile uint32_t *)0x40034004))
#define TIMER4_TBMR_R           (*((volatile uint32_t *)0x40034008))
#define TIMER4_CTL_R            (*((volatile uint32_t *)0x4003400C))
#define TIMER4_SYNC_R           (*((volatile uint32_t *)0x40034010))
#define TIMER4_IMR_R            (*((volatile uint32_t *)0x40034018))
#define TIMER4_RIS_R            (*((volatile uint32_t *)0x4003401C))
#define TIMER4_MIS_R            (*((volatile uint32_t *)0x40034020))
#define TIMER4_ICR_R            (*((volatile uint32_t *)0x40034024))
#define TIMER4_TAILR_R          (*((volatile uint32_t *)0x40034028))
#define TIMER4_TBILR_R          (*((volatile uint32_t *)0x4003402C))
#define TIMER4_TAMATCHR_R       (*((volatile uint32_t *)0x40034030))
#define TIMER4_TBMATCHR_R       (*((volatile uint32_t *)0x40034034))
#define TIMER4_TAPR_R           (*((volatile uint32_t *)0x40034038))
#define TIMER4_TBPR_R           (*((volatile uint32_t *)0x4003403C))
#define TIMER4_TAPMR_R          (*((volatile uint32_t *)0x40034040))
#define TIMER4_TBPMR_R          (*((volatile uint32_t *)0x40034044))
#define TIMER4_TAR_R            (*((volatile uint32_t *)0x40034048))
#define TIMER4_TBR_R            (*((volatile uint32_t *)0x4003404C))
#define TIMER4_TAV_R            (*((volatile uint32_t *)0x40034050))
#define TIMER4_TBV_R            (*((volatile uint32_t *)0x40034054))
#define TIMER4_RTCPD_R          (*((volatile uint32_t *)0x40034058))
#define TIMER4_TAPS_R           (*((volatile uint32_t *)0x4003405C))
#define TIMER4_TBPS_R           (*((volatile uint32_t *)0x40034060))
#define TIMER4_TAPV_R           (*((volatile uint32_t *)0x40034064))
#define TIMER4_TBPV_R           (*((volatile uint32_t *)0x40034068))
#define TIMER4_PP_R             (*((volatile uint32_t *)0x40034FC0))

//*****************************************************************************
//
// Timer registers (TIMER5)
//
//*****************************************************************************
#define TIMER5_CFG_R            (*((volatile uint32_t *)0x40035000))
#define TIMER5_TAMR_R           (*((volatile uint32_t *)0x40035004))
#define TIMER5_TBMR_R           (*((volatile uint32_t *)0x40035008))
#define TIMER5_CTL_R            (*((volatile uint32_t *)0x4003500C))
#define TIMER5_SYNC_R           (*((volatile uint32_t *)0x40035010))
#define TIMER5_IMR_R            (*((volatile uint32_t *)0x40035018))
#define TIMER5_RIS_R            (*((volatile uint32_t *)0x4003501C))
#define TIMER5_MIS_R            (*((volatile uint32_t *)0x40035020))
#define TIMER5_ICR_R            (*((volatile uint32_t *)0x40035024))
#define TIMER5_TAILR_R          (*((volatile uint32_t *)0x40035028))
#define TIMER5_TBILR_R          (*((volatile uint32_t *)0x4003502C))
#define TIMER5_TAMATCHR_R       (*((volatile uint32_t *)0x40035030))
#define TIMER5_TBMATCHR_R       (*((volatile uint32_t *)0x40035034))
#define TIMER5_TAPR_R           (*((volatile uint32_t *)0x40035038))
#define TIMER5_TBPR_R           (*((volatile uint32_t *)0x4003503C))
#define TIMER5_TAPMR_R          (*((volatile uint32_t *)0x40035040))
#define TIMER5_TBPMR_R          (*((volatile uint32_t *)0x40035044))
#define TIMER5_TAR_R            (*((volatile uint32_t *)0x40035048))
#define TIMER5_TBR_R            (*((volatile uint32_t *)0x4003504C))
#define TIMER5_TAV_R            (*((volatile uint32_t *)0x40035050))
#define TIMER5_TBV_R            (*((volatile uint32_t *)0x40035054))
#define TIMER5_RTCPD_R          (*((volatile uint32_t *)0x40035058))
#define TIMER5_TAPS_R           (*((volatile uint32_t *)0x4003505C))
#define TIMER5_TBPS_R           (*((volatile uint32_t *)0x40035060))
#define TIMER5_TAPV_R           (*((volatile uint32_t *)0x40035064))
#define TIMER5_TBPV_R           (*((volatile uint32_t *)0x40035068))
#define TIMER5_PP_R             (*((volatile uint32_t *)0x40035FC0))

//*****************************************************************************
//
// Timer registers (WTIMER0)
//
//*****************************************************************************
#define WTIMER0_CFG_R           (*((volatile uint32_t *)0x40036000))
#define WTIMER0_TAMR_R          (*((volatile uint32_t *)0x40036004))
#define WTIMER0_TBMR_R          (*((volatile uint32_t *)0x40036008))
#define WTIMER0_CTL_R           (*((volatile uint32_t *)0x4003600C))
#define WTIMER0_SYNC_R          (*((volatile uint32_t *)0x40036010))
#define WTIMER0_IMR_R           (*((volatile uint32_t *)0x40036018))
#define WTIMER0_RIS_R           (*((volatile uint32_t *)0x4003601C))
#define WTIMER0_MIS_R           (*((volatile uint32_t *)0x40036020))
#define WTIMER0_ICR_R           (*((volatile uint32_t *)0x40036024))
#define WTIMER0_TAILR_R         (*((volatile uint32_t *)0x40036028))
#define WTIMER0_TBILR_R         (*((volatile uint32_t *)0x4003602C))
#define WTIMER0_TAMATCHR_R      (*((volatile uint32_t *)0x40036030))
#define WTIMER0_TBMATCHR_R      (*((volatile uint32_t *)0x40036034))
#define WTIMER0_TAPR_R          (*((volatile uint32_t *)0x40036038))
#define WTIMER0_TBPR_R          (*((volatile uint32_t *)0x4003603C))
#define WTIMER0_TAPMR_R         (*((volatile uint32_t *)0x40036040))
#define WTIMER0_TBPMR_R         (*((volatile uint32_t *)0x40036044))
#define WTIMER0_TAR_R           (*((volatile uint32_t *)0x40036048))
#define WTIMER0_TBR_R           (*((volatile uint32_t *)0x4003604C))
#define WTIMER0_TAV_R           (*((volatile uint32_t *)0x40036050))
#define WTIMER0_TBV_R           (*((volatile uint32_t *)0x40036054))
#define WTIMER0_RTCPD_R         (*((volatile uint32_t *)0x40036058))
#define WTIMER0_TAPS_R          (*((volatile uint32_t *)0x4003605C))
#define WTIMER0_TBPS_R          (*((volatile uint32_t *)0x40036060))
#define WTIMER0_TAPV_R          (*((volatile uint32_t *)0x40036064))
#define WTIMER0_TBPV_R          (*((volatile uint32_t *)0x40036068))
#define WTIMER0_PP_R            (*((volatile uint32_t *)0x40036FC0))

//*****************************************************************************
//
// Timer registers (WTIMER1)
//
//*****************************************************************************
#define WTIMER1_CFG_R           (*((volatile uint32_t *)0x40037000))
#define WTIMER1_TAMR_R          (*((volatile uint32_t *)0x40037004))
#define WTIMER1_TBMR_R          (*((volatile uint32_t *)0x40037008))
#define WTIMER1_CTL_R           (*((volatile uint32_t *)0x4003700C))
#define WTIMER1_SYNC_R          (*((volatile uint32_t *)0x40037010))
#define WTIMER1_IMR_R           (*((volatile uint32_t *)0x40037018))
#define WTIMER1_RIS_R           (*((volatile uint32_t *)0x4003701C))
#define WTIMER1_MIS_R           (*((volatile uint32_t *)0x40037020))
#define WTIMER1_ICR_R           (*((volatile uint32_t *)0x40037024))
#define WTIMER1_TAILR_R         (*((volatile uint32_t *)0x40037028))
#define WTIMER1_TBILR_R         (*((volatile uint32_t *)0x4003702C))
#define WTIMER1_TAMATCHR_R      (*((volatile uint32_t *)0x40037030))
#define WTIMER1_TBMATCHR_R      (*((volatile uint32_t *)0x40037034))
#define WTIMER1_TAPR_R          (*((volatile uint32_t *)0x40037038))
#define WTIMER1_TBPR_R          (*((volatile uint32_t *)0x4003703C))
#define WTIMER1_TAPMR_R         (*((volatile uint32_t *)0x40037040))
#define WTIMER1_TBPMR_R         (*((volatile uint32_t *)0x40037044))
#define WTIMER1_TAR_R           (*((volatile uint32_t *)0x40037048))
#define WTIMER1_TBR_R           (*((volatile uint32_t *)0x4003704C))
#define WTIMER1_TAV_R           (*((volatile uint32_t *)0x40037050))
#define WTIMER1_TBV_R           (*((volatile uint32_t *)0x40037054))
#define WTIMER1_RTCPD_R         (*((volatile uint32_t *)0x40037058))
#define WTIMER1_TAPS_R          (*((volatile uint32_t *)0x4003705C))
#define WTIMER1_TBPS_R          (*((volatile uint32_t *)0x40037060))
#define WTIMER1_TAPV_R          (*((volatile uint32_t *)0x40037064))
#define WTIMER1_TBPV_R          (*((volatile uint32_t *)0x40037068))
#define WTIMER1_PP_R            (*((volatile uint32_t *)0x40037FC0))

//*****************************************************************************
//
// ADC registers (ADC0)
//
//*****************************************************************************
#define ADC0_ACTSS_R            (*((volatile uint32_t *)0x40038000))
#define ADC0_RIS_R              (*((volatile uint32_t *)0x40038004))
#define ADC0_IM_R               (*((volatile uint32_t *)0x40038008))
#define ADC0_ISC_R              (*((volatile uint32_t *)0x4003800C))
#define ADC0_OSTAT_R            (*((volatile uint32_t *)0x40038010))
#define ADC0_EMUX_R             (*((volatile uint32_t *)0x40038014))
#define ADC0_USTAT_R            (*((volatile uint32_t *)0x40038018))
#define ADC0_SSPRI_R            (*((volatile uint32_t *)0x40038020))
#define ADC0_SPC_R              (*((volatile uint32_t *)0x40038024))
#define ADC0_PSSI_R             (*((volatile uint32_t *)0x40038028))
#define ADC0_SAC_R              (*((volatile uint32_t *)0x40038030))
#define ADC0_DCISC_R            (*((volatile uint32_t *)0x40038034))
#define ADC0_CTL_R              (*((volatile uint32_t *)0x40038038))
#define ADC0_SSMUX0_R           (*((volatile uint32_t *)0x40038040))
#define ADC0_SSCTL0_R           (*((volatile uint32_t *)0x40038044))
#define ADC0_SSFIFO0_R          (*((volatile uint32_t *)0x40038048))
#define ADC0_SSFSTAT0_R         (*((volatile uint32_t *)0x4003804C))
#define ADC0_SSOP0_R            (*((volatile uint32_t *)0x40038050))
#define ADC0_SSDC0_R            (*((volatile uint32_t *)0x40038054))
#define ADC0_SSMUX1_R           (*((volatile uint32_t *)0x40038060))
#define ADC0_SSCTL1_R           (*((volatile uint32_t *)0x40038064))
#define ADC0_SSFIFO1_R          (*((volatile uint32_t *)0x40038068))
#define ADC0_SSFSTAT1_R         (*((volatile uint32_t *)0x4003806C))
#define ADC0_SSOP1_R            (*((volatile uint32_t *)0x40038070))
#define ADC0_SSDC1_R            (*((volatile uint32_t *)0x40038074))
#define ADC0_SSMUX2_R           (*((volatile uint32_t *)0x40038080))
#define ADC0_SSCTL2_R           (*((volatile uint32_t *)0x40038084))
#define ADC0_SSFIFO2_R          (*((volatile uint32_t *)0x40038088))
#define ADC0_SSFSTAT2_R         (*((volatile uint32_t *)0x4003808C))
#define ADC0_SSOP2_R            (*((volatile uint32_t *)0x40038090))
#define ADC0_SSDC2_R            (*((volatile uint32_t *)0x40038094))
#define ADC0_SSMUX3_R           (*((volatile uint32_t *)0x400380A0))
#define ADC0_SSCTL3_R           (*((volatile uint32_t *)0x400380A4))
#define ADC0_SSFIFO3_R          (*((volatile uint32_t *)0x400380A8))
#define ADC0_SSFSTAT3_R         (*((volatile uint32_t *)0x400380AC))
#define ADC0_SSOP3_R            (*((volatile uint32_t *)0x400380B0))
#define ADC0_SSDC3_R            (*((volatile uint32_t *)0x400380B4))
#define ADC0_DCRIC_R            (*((volatile uint32_t *)0x40038D00))
#define ADC0_DCCTL0_R           (*((volatile uint32_t *)0x40038E00))
#define ADC0_DCCTL1_R           (*((volatile uint32_t *)0x40038E04))
#define ADC0_DCCTL2_R           (*((volatile uint32_t *)0x40038E08))
#define ADC0_DCCTL3_R           (*((volatile uint32_t *)0x40038E0C))
#define ADC0_DCCTL4_R           (*((volatile uint32_t *)0x40038E10))
#define ADC0_DCCTL5_R           (*((volatile uint32_t *)0x40038E14))
#define ADC0_DCCTL6_R           (*((volatile uint32_t *)0x40038E18))
#define ADC0_DCCTL7_R           (*((volatile uint32_t *)0x40038E1C))
#define ADC0_DCCMP0_R           (*((volatile uint32_t *)0x40038E40))
#define ADC0_DCCMP1_R           (*((volatile uint32_t *)0x40038E44))
#define ADC0_DCCMP2_R           (*((volatile uint32_t *)0x40038E48))
#define ADC0_DCCMP3_R           (*((volatile uint32_t *)0x40038E4C))
#define ADC0_DCCMP4_R           (*((volatile uint32_t *)0x40038E50))
#define ADC0_DCCMP5_R           (*((volatile uint32_t *)0x40038E54))
#define ADC0_DCCMP6_R           (*((volatile uint32_t *)0x40038E58))
#define ADC0_DCCMP7_R           (*((volatile uint32_t *)0x40038E5C))
#define ADC0_PP_R               (*((volatile uint32_t *)0x40038FC0))
#define ADC0_PC_R               (*((volatile uint32_t *)0x40038FC4))
#define ADC0_CC_R               (*((volatile uint32_t *)0x40038FC8))

//*****************************************************************************
//
// ADC registers (ADC1)
//
//*****************************************************************************
#define ADC1_ACTSS_R            (*((volatile uint32_t *)0x40039000))
#define ADC1_RIS_R              (*((volatile uint32_t *)0x40039004))
#define ADC1_IM_R               (*((volatile uint32_t *)0x40039008))
#define ADC1_ISC_R              (*((volatile uint32_t *)0x4003900C))
#define ADC1_OSTAT_R            (*((volatile uint32_t *)0x40039010))
#define ADC1_EMUX_R             (*((volatile uint32_t *)0x40039014))
#define ADC1_USTAT_R            (*((volatile uint32_t *)0x40039018))
#define ADC1_SSPRI_R            (*((volatile uint32_t *)0x40039020))
#define ADC1_SPC_R              (*((volatile uint32_t *)0x40039024))
#define ADC1_PSSI_R             (*((volatile uint32_t *)0x40039028))
#define ADC1_SAC_R              (*((volatile uint32_t *)0x40039030))
#define ADC1_DCISC_R            (*((volatile uint32_t *)0x40039034))
#define ADC1_CTL_R              (*((volatile uint32_t *)0x40039038))
#define ADC1_SSMUX0_R           (*((volatile uint32_t *)0x40039040))
#define ADC1_SSCTL0_R           (*((volatile uint32_t *)0x40039044))
#define ADC1_SSFIFO0_R          (*((volatile uint32_t *)0x40039048))
#define ADC1_SSFSTAT0_R         (*((volatile uint32_t *)0x4003904C))
#define ADC1_SSOP0_R            (*((volatile uint32_t *)0x40039050))
#define ADC1_SSDC0_R            (*((volatile uint32_t *)0x40039054))
#define ADC1_SSMUX1_R           (*((volatile uint32_t *)0x40039060))
#define ADC1_SSCTL1_R           (*((volatile uint32_t *)0x40039064))
#define ADC1_SSFIFO1_R          (*((volatile uint32_t *)0x40039068))
#define ADC1_SSFSTAT1_R         (*((volatile uint32_t *)0x4003906C))
#define ADC1_SSOP1_R            (*((volatile uint32_t *)0x40039070))
#define ADC1_SSDC1_R            (*((volatile uint32_t *)0x40039074))
#define ADC1_SSMUX2_R           (*((volatile uint32_t *)0x40039080))
#define ADC1_SSCTL2_R           (*((volatile uint32_t *)0x40039084))
#define ADC1_SSFIFO2_R          (*((volatile uint32_t *)0x40039088))
#define ADC1_SSFSTAT2_R         (*((volatile uint32_t *)0x4003908C))
#define ADC1_SSOP2_R            (*((volatile uint32_t *)0x40039090))
#define ADC1_SSDC2_R            (*((volatile uint32_t *)0x40039094))
#define ADC1_SSMUX3_R           (*((volatile uint32_t *)0x400390A0))
#define ADC1_SSCTL3_R           (*((volatile uint32_t *)0x400390A4))
#define ADC1_SSFIFO3_R          (*((volatile uint32_t *)0x400390A8))
#define ADC1_SSFSTAT3_R         (*((volatile uint32_t *)0x400390AC))
#define ADC1_SSOP3_R            (*((volatile uint32_t *)0x400390B0))
#define ADC1_SSDC3_R            (*((volatile uint32_t *)0x400390B4))
#define ADC1_DCRIC_R            (*((volatile uint32_t *)0x40039D00))
#define ADC1_DCCTL0_R           (*((volatile uint32_t *)0x40039E00))
#define ADC1_DCCTL1_R           (*((volatile uint32_t *)0x40039E04))
#define ADC1_DCCTL2_R           (*((volatile uint32_t *)0x40039E08))
#define ADC1_DCCTL3_R           (*((volatile uint32_t *)0x40039E0C))
#define ADC1_DCCTL4_R           (*((volatile uint32_t *)0x40039E10))
#define ADC1_DCCTL5_R           (*((volatile uint32_t *)0x40039E14))
#define ADC1_DCCTL6_R           (*((volatile uint32_t *)0x40039E18))
#define ADC1_DCCTL7_R           (*((volatile uint32_t *)0x40039E1C))
#define ADC1_DCCMP0_R           (*((volatile uint32_t *)0x40039E40))
#define ADC1_DCCMP1_R           (*((volatile uint32_t *)0x40039E44))
#define ADC1_DCCMP2_R           (*((volatile uint32_t *)0x40039E48))
#define ADC1_DCCMP3_R           (*((volatile uint32_t *)0x40039E4C))
#define ADC1_DCCMP4_R           (*((volatile uint32_t *)0x40039E50))
#define ADC1_DCCMP5_R           (*((volatile uint32_t *)0x40039E54))
#define ADC1_DCCMP6_R           (*((volatile uint32_t *)0x40039E58))
#define ADC1_DCCMP7_R           (*((volatile uint32_t *)0x40039E5C))
#define ADC1_PP_R               (*((volatile uint32_t *)0x40039FC0))
#define ADC1_PC_R               (*((volatile uint32_t *)0x40039FC4))
#define ADC1_CC_R               (*((volatile uint32_t *)0x40039FC8))

//*****************************************************************************
//
// Comparator registers (COMP)
//
//*****************************************************************************
#define COMP_ACMIS_R            (*((volatile uint32_t *)0x4003C000))
#define COMP_ACRIS_R            (*((volatile uint32_t *)0x4003C004))
#define COMP_ACINTEN_R          (*((volatile uint32_t *)0x4003C008))
#define COMP_ACREFCTL_R         (*((volatile uint32_t *)0x4003C010))
#define COMP_ACSTAT0_R          (*((volatile uint32_t *)0x4003C020))
#define COMP_ACCTL0_R           (*((volatile uint32_t *)0x4003C024))
#define COMP_ACSTAT1_R          (*((volatile uint32_t *)0x4003C040))
#define COMP_ACCTL1_R           (*((volatile uint32_t *)0x4003C044))
#define COMP_PP_R               (*((volatile uint32_t *)0x4003CFC0))

//*****************************************************************************
//
// CAN registers (CAN0)
//
//*****************************************************************************
#define CAN0_CTL_R              (*((volatile uint32_t *)0x40040000))
#define CAN0_STS_R              (*((volatile uint32_t *)0x40040004))
#define CAN0_ERR_R              (*((volatile uint32_t *)0x40040008))
#define CAN0_BIT_R              (*((volatile uint32_t *)0x4004000C))
#define CAN0_INT_R              (*((volatile uint32_t *)0x40040010))
#define CAN0_TST_R              (*((volatile uint32_t *)0x40040014))
#define CAN0_BRPE_R             (*((volatile uint32_t *)0x40040018))
#define CAN0_IF1CRQ_R           (*((volatile uint32_t *)0x40040020))
#define CAN0_IF1CMSK_R          (*((volatile uint32_t *)0x40040024))
#define CAN0_IF1MSK1_R          (*((volatile uint32_t *)0x40040028))
#define CAN0_IF1MSK2_R          (*((volatile uint32_t *)0x4004002C))
#define CAN0_IF1ARB1_R          (*((volatile uint32_t *)0x40040030))
#define CAN0_IF1ARB2_R          (*((volatile uint32_t *)0x40040034))
#define CAN0_IF1MCTL_R          (*((volatile uint32_t *)0x40040038))
#define CAN0_IF1DA1_R           (*((volatile uint32_t *)0x4004003C))
#define CAN0_IF1DA2_R           (*((volatile uint32_t *)0x40040040))
#define CAN0_IF1DB1_R           (*((volatile uint32_t *)0x40040044))
#define CAN0_IF1DB2_R           (*((volatile uint32_t *)0x40040048))
#define CAN0_IF2CRQ_R           (*((volatile uint32_t *)0x40040080))
#define CAN0_IF2CMSK_R          (*((volatile uint32_t *)0x40040084))
#define CAN0_IF2MSK1_R          (*((volatile uint32_t *)0x40040088))
#define CAN0_IF2MSK2_R          (*((volatile uint32_t *)0x4004008C))
#define CAN0_IF2ARB1_R          (*((volatile uint32_t *)0x40040090))
#define CAN0_IF2ARB2_R          (*((volatile uint32_t *)0x40040094))
#define CAN0_IF2MCTL_R          (*((volatile uint32_t *)0x40040098))
#define CAN0_IF2DA1_R           (*((volatile uint32_t *)0x4004009C))
#define CAN0_IF2DA2_R           (*((volatile uint32_t *)0x400400A0))
#define CAN0_IF2DB1_R           (*((volatile uint32_t *)0x400400A4))
#define CAN0_IF2DB2_R           (*((volatile uint32_t *)0x400400A8))
#define CAN0_TXRQ1_R            (*((volatile uint32_t *)0x40040100))
#define CAN0_TXRQ2_R            (*((volatile uint32_t *)0x40040104))
#define CAN0_NWDA1_R            (*((volatile uint32_t *)0x40040120))
#define CAN0_NWDA2_R            (*((volatile uint32_t *)0x40040124))
#define CAN0_MSG1INT_R          (*((volatile uint32_t *)0x40040140))
#define CAN0_MSG2INT_R          (*((volatile uint32_t *)0x40040144))
#define CAN0_MSG1VAL_R          (*((volatile uint32_t *)0x40040160))
#define CAN0_MSG2VAL_R          (*((volatile uint32_t *)0x40040164))

//*****************************************************************************
//
// Timer registers (WTIMER2)
//
//*****************************************************************************
#define WTIMER2_CFG_R           (*((volatile uint32_t *)0x4004C000))
#define WTIMER2_TAMR_R          (*((volatile uint32_t *)0x4004C004))
#define WTIMER2_TBMR_R          (*((volatile uint32_t *)0x4004C008))
#define WTIMER2_CTL_R           (*((volatile uint32_t *)0x4004C00C))
#define WTIMER2_SYNC_R          (*((volatile uint32_t *)0x4004C010))
#define WTIMER2_IMR_R           (*((volatile uint32_t *)0x4004C018))
#define WTIMER2_RIS_R           (*((volatile uint32_t *)0x4004C01C))
#define WTIMER2_MIS_R           (*((volatile uint32_t *)0x4004C020))
#define WTIMER2_ICR_R           (*((volatile uint32_t *)0x4004C024))
#define WTIMER2_TAILR_R         (*((volatile uint32_t *)0x4004C028))
#define WTIMER2_TBILR_R         (*((volatile uint32_t *)0x4004C02C))
#define WTIMER2_TAMATCHR_R      (*((volatile uint32_t *)0x4004C030))
#define WTIMER2_TBMATCHR_R      (*((volatile uint32_t *)0x4004C034))
#define WTIMER2_TAPR_R          (*((volatile uint32_t *)0x4004C038))
#define WTIMER2_TBPR_R          (*((volatile uint32_t *)0x4004C03C))
#define WTIMER2_TAPMR_R         (*((volatile uint32_t *)0x4004C040))
#define WTIMER2_TBPMR_R         (*((volatile uint32_t *)0x4004C044))
#define WTIMER2_TAR_R           (*((volatile uint32_t *)0x4004C048))
#define WTIMER2_TBR_R           (*((volatile uint32_t *)0x4004C04C))
#define WTIMER2_TAV_R           (*((volatile uint32_t *)0x4004C050))
#define WTIMER2_TBV_R           (*((volatile uint32_t *)0x4004C054))
#define WTIMER2_RTCPD_R         (*((volatile uint32_t *)0x4004C058))
#define WTIMER2_TAPS_R          (*((volatile uint32_t *)0x4004C05C))
#define WTIMER2_TBPS_R          (*((volatile uint32_t *)0x4004C060))
#define WTIMER2_TAPV_R          (*((volatile uint32_t *)0x4004C064))
#define WTIMER2_TBPV_R          (*((volatile uint32_t *)0x4004C068))
#define WTIMER2_PP_R            (*((volatile uint32_t *)0x4004CFC0))

//*****************************************************************************
//
// Timer registers (WTIMER3)
//
//*****************************************************************************
#define WTIMER3_CFG_R           (*((volatile uint32_t *)0x4004D000))
#define WTIMER3_TAMR_R          (*((volatile uint32_t *)0x4004D004))
#define WTIMER3_TBMR_R          (*((volatile uint32_t *)0x4004D008))
#define WTIMER3_CTL_R           (*((volatile uint32_t *)0x4004D00C))
#define WTIMER3_SYNC_R          (*((volatile uint32_t *)0x4004D010))
#define WTIMER3_IMR_R           (*((volatile uint32_t *)0x4004D018))
#define WTIMER3_RIS_R           (*((volatile uint32_t *)0x4004D01C))
#define WTIMER3_MIS_R           (*((volatile uint32_t *)0x4004D020))
#define WTIMER3_ICR_R           (*((volatile uint32_t *)0x4004D024))
#define WTIMER3_TAILR_R         (*((volatile uint32_t *)0x4004D028))
#define WTIMER3_TBILR_R         (*((volatile uint32_t *)0x4004D02C))
#define WTIMER3_TAMATCHR_R      (*((volatile uint32_t *)0x4004D030))
#define WTIMER3_TBMATCHR_R      (*((volatile uint32_t *)0x4004D034))
#define WTIMER3_TAPR_R          (*((volatile uint32_t *)0x4004D038))
#define WTIMER3_TBPR_R          (*((volatile uint32_t *)0x4004D03C))
#define WTIMER3_TAPMR_R         (*((volatile uint32_t *)0x4004D040))
#define WTIMER3_TBPMR_R         (*((volatile uint32_t *)0x4004D044))
#define WTIMER3_TAR_R           (*((volatile uint32_t *)0x4004D048))
#define WTIMER3_TBR_R           (*((volatile uint32_t *)0x4004D04C))
#define WTIMER3_TAV_R           (*((volatile uint32_t *)0x4004D050))
#define WTIMER3_TBV_R           (*((volatile uint32_t *)0x4004D054))
#define WTIMER3_RTCPD_R         (*((volatile uint32_t *)0x4004D058))
#define WTIMER3_TAPS_R          (*((volatile uint32_t *)0x4004D05C))
#define WTIMER3_TBPS_R          (*((volatile uint32_t *)0x4004D060))
#define WTIMER3_TAPV_R          (*((volatile uint32_t *)0x4004D064))
#define WTIMER3_TBPV_R          (*((volatile uint32_t *)0x4004D068))
#define WTIMER3_PP_R            (*((volatile uint32_t *)0x4004DFC0))

//*****************************************************************************
//
// Timer registers (WTIMER4)
//
//*****************************************************************************
#define WTIMER4_CFG_R           (*((volatile uint32_t *)0x4004E000))
#define WTIMER4_TAMR_R          (*((volatile uint32_t *)0x4004E004))
#define WTIMER4_TBMR_R          (*((volatile uint32_t *)0x4004E008))
#define WTIMER4_CTL_R           (*((volatile uint32_t *)0x4004E00C))
#define WTIMER4_SYNC_R          (*((volatile uint32_t *)0x4004E010))
#define WTIMER4_IMR_R           (*((volatile uint32_t *)0x4004E018))
#define WTIMER4_RIS_R           (*((volatile uint32_t *)0x4004E01C))
#define WTIMER4_MIS_R           (*((volatile uint32_t *)0x4004E020))
#define WTIMER4_ICR_R           (*((volatile uint32_t *)0x4004E024))
#define WTIMER4_TAILR_R         (*((volatile uint32_t *)0x4004E028))
#define WTIMER4_TBILR_R         (*((volatile uint32_t *)0x4004E02C))
#define WTIMER4_TAMATCHR_R      (*((volatile uint32_t *)0x4004E030))
#define WTIMER4_TBMATCHR_R      (*((volatile uint32_t *)0x4004E034))
#define WTIMER4_TAPR_R          (*((volatile uint32_t *)0x4004E038))
#define WTIMER4_TBPR_R          (*((volatile uint32_t *)0x4004E03C))
#define WTIMER4_TAPMR_R         (*((volatile uint32_t *)0x4004E040))
#define WTIMER4_TBPMR_R         (*((volatile uint32_t *)0x4004E044))
#define WTIMER4_TAR_R           (*((volatile uint32_t *)0x4004E048))
#define WTIMER4_TBR_R           (*((volatile uint32_t *)0x4004E04C))
#define WTIMER4_TAV_R           (*((volatile uint32_t *)0x4004E050))
#define WTIMER4_TBV_R           (*((volatile uint32_t *)0x4004E054))
#define WTIMER4_RTCPD_R         (*((volatile uint32_t *)0x4004E058))
#define WTIMER4_TAPS_R          (*((volatile uint32_t *)0x4004E05C))
#define WTIMER4_TBPS_R          (*((volatile uint32_t *)0x4004E060))
#define WTIMER4_TAPV_R          (*((volatile uint32_t *)0x4004E064))
#define WTIMER4_TBPV_R          (*((volatile uint32_t *)0x4004E068))
#define WTIMER4_PP_R            (*((volatile uint32_t *)0x4004EFC0))

//*****************************************************************************
//
// Timer registers (WTIMER5)
//
//*****************************************************************************
#define WTIMER5_CFG_R           (*((volatile uint32_t *)0x4004F000))
#define WTIMER5_TAMR_R          (*((volatile uint32_t *)0x4004F004))
#define WTIMER5_TBMR_R          (*((volatile uint32_t *)0x4004F008))
#define WTIMER5_CTL_R           (*((volatile uint32_t *)0x4004F00C))
#define WTIMER5_SYNC_R          (*((volatile uint32_t *)0x4004F010))
#define WTIMER5_IMR_R           (*((volatile uint32_t *)0x4004F018))
#define WTIMER5_RIS_R           (*((volatile uint32_t *)0x4004F01C))
#define WTIMER5_MIS_R           (*((volatile uint32_t *)0x4004F020))
#define WTIMER5_ICR_R           (*((volatile uint32_t *)0x4004F024))
#define WTIMER5_TAILR_R         (*((volatile uint32_t *)0x4004F028))
#define WTIMER5_TBILR_R         (*((volatile uint32_t *)0x4004F02C))
#define WTIMER5_TAMATCHR_R      (*((volatile uint32_t *)0x4004F030))
#define WTIMER5_TBMATCHR_R      (*((volatile uint32_t *)0x4004F034))
#define WTIMER5_TAPR_R          (*((volatile uint32_t *)0x4004F038))
#define WTIMER5_TBPR_R          (*((volatile uint32_t *)0x4004F03C))
#define WTIMER5_TAPMR_R         (*((volatile uint32_t *)0x4004F040))
#define WTIMER5_TBPMR_R         (*((volatile uint32_t *)0x4004F044))
#define WTIMER5_TAR_R           (*((volatile uint32_t *)0x4004F048))
#define WTIMER5_TBR_R           (*((volatile uint32_t *)0x4004F04C))
#define WTIMER5_TAV_R           (*((volatile uint32_t *)0x4004F050))
#define WTIMER5_TBV_R           (*((volatile uint32_t *)0x4004F054))
#define WTIMER5_RTCPD_R         (*((volatile uint32_t *)0x4004F058))
#define WTIMER5_TAPS_R          (*((volatile uint32_t *)0x4004F05C))
#define WTIMER5_TBPS_R          (*((volatile uint32_t *)0x4004F060))
#define WTIMER5_TAPV_R          (*((volatile uint32_t *)0x4004F064))
#define WTIMER5_TBPV_R          (*((volatile uint32_t *)0x4004F068))
#define WTIMER5_PP_R            (*((volatile uint32_t *)0x4004FFC0))

//*****************************************************************************
//
// GPIO registers (PORTA AHB)
//
//*****************************************************************************
#define GPIO_PORTA_AHB_DATA_BITS_R                                            \
                                ((volatile uint32_t *)0x40058000)
#define GPIO_PORTA_AHB_DATA_R   (*((volatile uint32_t *)0x400583FC))
#define GPIO_PORTA_AHB_DIR_R    (*((volatile uint32_t *)0x40058400))
#define GPIO_PORTA_AHB_IS_R     (*((volatile uint32_t *)0x40058404))
#define GPIO_PORTA_AHB_IBE_R    (*((volatile uint32_t *)0x40058408))
#define GPIO_PORTA_AHB_IEV_R    (*((volatile uint32_t *)0x4005840C))
#define GPIO_PORTA_AHB_IM_R     (*((volatile uint32_t *)0x40058410))
#define GPIO_PORTA_AHB_RIS_R    (*((volatile uint32_t *)0x40058414))
#define GPIO_PORTA_AHB_MIS_R    (*((volatile uint32_t *)0x40058418))
#define GPIO_PORTA_AHB_ICR_R    (*((volatile uint32_t *)0x4005841C))
#define GPIO_PORTA_AHB_AFSEL_R  (*((volatile uint32_t *)0x40058420))
#define GPIO_PORTA_AHB_DR2R_R   (*((volatile uint32_t *)0x40058500))
#define GPIO_PORTA_AHB_DR4R_R   (*((volatile uint32_t *)0x40058504))
#define GPIO_PORTA_AHB_DR8R_R   (*((volatile uint32_t *)0x40058508))
#define GPIO_PORTA_AHB_ODR_R    (*((volatile uint32_t *)0x4005850C))
#define GPIO_PORTA_AHB_PUR_R    (*((volatile uint32_t *)0x40058510))
#define GPIO_PORTA_AHB_PDR_R    (*((volatile uint32_t *)0x40058514))
#define GPIO_PORTA_AHB_SLR_R    (*((volatile uint32_t *)0x40058518))
#define GPIO_PORTA_AHB_DEN_R    (*((volatile uint32_t *)0x4005851C))
#define GPIO_PORTA_AHB_LOCK_R   (*((volatile uint32_t *)0x40058520))
#define GPIO_PORTA_AHB_CR_R     (*((volatile uint32_t *)0x40058524))
#define GPIO_PORTA_AHB_AMSEL_R  (*((volatile uint32_t *)0x40058528))
#define GPIO_PORTA_AHB_PCTL_R   (*((volatile uint32_t *)0x4005852C))
#define GPIO_PORTA_AHB_ADCCTL_R (*((volatile uint32_t *)0x40058530))
#define GPIO_PORTA_AHB_DMACTL_R (*((volatile uint32_t *)0x40058534))

//*****************************************************************************
//
// GPIO registers (PORTB AHB)
//
//*****************************************************************************
#define GPIO_PORTB_AHB_DATA_BITS_R                                            \
                                ((volatile uint32_t *)0x40059000)
#define GPIO_PORTB_AHB_DATA_R   (*((volatile uint32_t *)0x400593FC))
#define GPIO_PORTB_AHB_DIR_R    (*((volatile uint32_t *)0x40059400))
#define GPIO_PORTB_AHB_IS_R     (*((volatile uint32_t *)0x40059404))
#define GPIO_PORTB_AHB_IBE_R    (*((volatile uint32_t *)0x40059408))
#define GPIO_PORTB_AHB_IEV_R    (*((volatile uint32_t *)0x4005940C))
#define GPIO_PORTB_AHB_IM_R     (*((volatile uint32_t *)0x40059410))
#define GPIO_PORTB_AHB_RIS_R    (*((volatile uint32_t *)0x40059414))
#define GPIO_PORTB_AHB_MIS_R    (*((volatile uint32_t *)0x40059418))
#define GPIO_PORTB_AHB_ICR_R    (*((volatile uint32_t *)0x4005941C))
#define GPIO_PORTB_AHB_AFSEL_R  (*((volatile uint32_t *)0x40059420))
#define GPIO_PORTB_AHB_DR2R_R   (*((volatile uint32_t *)0x40059500))
#define GPIO_PORTB_AHB_DR4R_R   (*((volatile uint32_t *)0x40059504))
#define GPIO_PORTB_AHB_DR8R_R   (*((volatile uint32_t *)0x40059508))
#define GPIO_PORTB_AHB_ODR_R    (*((volatile uint32_t *)0x4005950C))
#define GPIO_PORTB_AHB_PUR_R    (*((volatile uint32_t *)0x40059510))
#define GPIO_PORTB_AHB_PDR_R    (*((volatile uint32_t *)0x40059514))
#define GPIO_PORTB_AHB_SLR_R    (*((volatile uint32_t *)0x40059518))
#define GPIO_PORTB_AHB_DEN_R    (*((volatile uint32_t *)0x4005951C))
#define GPIO_PORTB_AHB_LOCK_R   (*((volatile uint32_t *)0x40059520))
#define GPIO_PORTB_AHB_CR_R     (*((volatile uint32_t *)0x40059524))
#define GPIO_PORTB_AHB_AMSEL_R  (*((volatile uint32_t *)0x40059528))
#define GPIO_PORTB_AHB_PCTL_R   (*((volatile uint32_t *)0x4005952C))
#define GPIO_PORTB_AHB_ADCCTL_R (*((volatile uint32_t *)0x40059530))
#define GPIO_PORTB_AHB_DMACTL_R (*((volatile uint32_t *)0x40059534))

//*****************************************************************************
//
// GPIO registers (PORTC AHB)
//
//*****************************************************************************
#define GPIO_PORTC_AHB_DATA_BITS_R                                            \
                                ((volatile uint32_t *)0x4005A000)
#define GPIO_PORTC_AHB_DATA_R   (*((volatile uint32_t *)0x4005A3FC))
#define GPIO_PORTC_AHB_DIR_R    (*((volatile uint32_t *)0x4005A400))
#define GPIO_PORTC_AHB_IS_R     (*((volatile uint32_t *)0x4005A404))
#define GPIO_PORTC_AHB_IBE_R    (*((volatile uint32_t *)0x4005A408))
#define GPIO_PORTC_AHB_IEV_R    (*((volatile uint32_t *)0x4005A40C))
#define GPIO_PORTC_AHB_IM_R     (*((volatile uint32_t *)0x4005A410))
#define GPIO_PORTC_AHB_RIS_R    (*((volatile uint32_t *)0x4005A414))
#define GPIO_PORTC_AHB_MIS_R    (*((volatile uint32_t *)0x4005A418))
#define GPIO_PORTC_AHB_ICR_R    (*((volatile uint32_t *)0x4005A41C))
#define GPIO_PORTC_AHB_AFSEL_R  (*((volatile uint32_t *)0x4005A420))
#define GPIO_PORTC_AHB_DR2R_R   (*((volatile uint32_t *)0x4005A500))
#define GPIO_PORTC_AHB_DR4R_R   (*((volatile uint32_t *)0x4005A504))
#define GPIO_PORTC_AHB_DR8R_R   (*((volatile uint32_t *)0x4005A508))
#define GPIO_PORTC_AHB_ODR_R    (*((volatile uint32_t *)0x4005A50C))
#define GPIO_PORTC_AHB_PUR_R    (*((volatile uint32_t *)0x4005A510))
#define GPIO_PORTC_AHB_PDR_R    (*((volatile uint32_t *)0x4005A514))
#define GPIO_PORTC_AHB_SLR_R    (*((volatile uint32_t *)0x4005A518))
#define GPIO_PORTC_AHB_DEN_R    (*((volatile uint32_t *)0x4005A51C))
#define GPIO_PORTC_AHB_LOCK_R   (*((volatile uint32_t *)0x4005A520))
#define GPIO_PORTC_AHB_CR_R     (*((volatile uint32_t *)0x4005A524))
#define GPIO_PORTC_AHB_AMSEL_R  (*((volatile uint32_t *)0x4005A528))
#define GPIO_PORTC_AHB_PCTL_R   (*((volatile uint32_t *)0x4005A52C))
#define GPIO_PORTC_AHB_ADCCTL_R (*((volatile uint32_t *)0x4005A530))
#define GPIO_PORTC_AHB_DMACTL_R (*((volatile uint32_t *)0x4005A534))

//*****************************************************************************
//
// GPIO registers (PORTD AHB)
//
//*****************************************************************************
#define GPIO_PORTD_AHB_DATA_BITS_R                                            \
                                ((volatile uint32_t *)0x4005B000)
#define GPIO_PORTD_AHB_DATA_R   (*((volatile uint32_t *)0x4005B3FC))
#define GPIO_PORTD_AHB_DIR_R    (*((volatile uint32_t *)0x4005B400))
#define GPIO_PORTD_AHB_IS_R     (*((volatile uint32_t *)0x4005B404))
#define GPIO_PORTD_AHB_IBE_R    (*((volatile uint32_t *)0x4005B408))
#define GPIO_PORTD_AHB_IEV_R    (*((volatile uint32_t *)0x4005B40C))
#define GPIO_PORTD_AHB_IM_R     (*((volatile uint32_t *)0x4005B410))
#define GPIO_PORTD_AHB_RIS_R    (*((volatile uint32_t *)0x4005B414))
#define GPIO_PORTD_AHB_MIS_R    (*((volatile uint32_t *)0x4005B418))
#define GPIO_PORTD_AHB_ICR_R    (*((volatile uint32_t *)0x4005B41C))
#define GPIO_PORTD_AHB_AFSEL_R  (*((volatile uint32_t *)0x4005B420))
#define GPIO_PORTD_AHB_DR2R_R   (*((volatile uint32_t *)0x4005B500))
#define GPIO_PORTD_AHB_DR4R_R   (*((volatile uint32_t *)0x4005B504))
#define GPIO_PORTD_AHB_DR8R_R   (*((volatile uint32_t *)0x4005B508))
#define GPIO_PORTD_AHB_ODR_R    (*((volatile uint32_t *)0x4005B50C))
#define GPIO_PORTD_AHB_PUR_R    (*((volatile uint32_t *)0x4005B510))
#define GPIO_PORTD_AHB_PDR_R    (*((volatile uint32_t *)0x4005B514))
#define GPIO_PORTD_AHB_SLR_R    (*((volatile uint32_t *)0x4005B518))
#define GPIO_PORTD_AHB_DEN_R    (*((volatile uint32_t *)0x4005B51C))
#define GPIO_PORTD_AHB_LOCK_R   (*((volatile uint32_t *)0x4005B520))
#define GPIO_PORTD_AHB_CR_R     (*((volatile uint32_t *)0x4005B524))
#define GPIO_PORTD_AHB_AMSEL_R  (*((volatile uint32_t *)0x4005B528))
#define GPIO_PORTD_AHB_PCTL_R   (*((volatile uint32_t *)0x4005B52C))
#define GPIO_PORTD_AHB_ADCCTL_R (*((volatile uint32_t *)0x4005B530))
#define GPIO_PORTD_AHB_DMACTL_R (*((volatile uint32_t *)0x4005B534))

//*****************************************************************************
//
// GPIO registers (PORTE AHB)
//
//*****************************************************************************
#define GPIO_PORTE_AHB_DATA_BITS_R                                            \
                                ((volatile uint32_t *)0x4005C000)
#define GPIO_PORTE_AHB_DATA_R   (*((volatile uint32_t *)0x4005C3FC))
#define GPIO_PORTE_AHB_DIR_R    (*((volatile uint32_t *)0x4005C400))
#define GPIO_PORTE_AHB_IS_R     (*((volatile uint32_t *)0x4005C404))
#define GPIO_PORTE_AHB_IBE_R    (*((volatile uint32_t *)0x4005C408))
#define GPIO_PORTE_AHB_IEV_R    (*((volatile uint32_t *)0x4005C40C))
#define GPIO_PORTE_AHB_IM_R     (*((volatile uint32_t *)0x4005C410))
#define GPIO_PORTE_AHB_RIS_R    (*((volatile uint32_t *)0x4005C414))
#define GPIO_PORTE_AHB_MIS_R    (*((volatile uint32_t *)0x4005C418))
#define GPIO_PORTE_AHB_ICR_R    (*((volatile uint32_t *)0x4005C41C))
#define GPIO_PORTE_AHB_AFSEL_R  (*((volatile uint32_t *)0x4005C420))
#define GPIO_PORTE_AHB_DR2R_R   (*((volatile uint32_t *)0x4005C500))
#define GPIO_PORTE_AHB_DR4R_R   (*((volatile uint32_t *)0x4005C504))
#define GPIO_PORTE_AHB_DR8R_R   (*((volatile uint32_t *)0x4005C508))
#define GPIO_PORTE_AHB_ODR_R    (*((volatile uint32_t *)0x4005C50C))
#define GPIO_PORTE_AHB_PUR_R    (*((volatile uint32_t *)0x4005C510))
#define GPIO_PORTE_AHB_PDR_R    (*((volatile uint32_t *)0x4005C514))
#define GPIO_PORTE_AHB_SLR_R    (*((volatile uint32_t *)0x4005C518))
#define GPIO_PORTE_AHB_DEN_R    (*((volatile uint32_t *)0x4005C51C))
#define GPIO_PORTE_AHB_LOCK_R   (*((volatile uint32_t *)0x4005C520))
#define GPIO_PORTE_AHB_CR_R     (*((volatile uint32_t *)0x4005C524))
#define GPIO_PORTE_AHB_AMSEL_R  (*((volatile uint32_t *)0x4005C528))
#define GPIO_PORTE_AHB_PCTL_R   (*((volatile uint32_t *)0x4005C52C))
#define GPIO_PORTE_AHB_ADCCTL_R (*((volatile uint32_t *)0x4005C530))
#define GPIO_PORTE_AHB_DMACTL_R (*((volatile uint32_t *)0x4005C534))

//*****************************************************************************
//
// GPIO registers (PORTF AHB)
//
//*****************************************************************************
#define GPIO_PORTF_AHB_DATA_BITS_R                                            \
                                ((volatile uint32_t *)0x4005D000)
#define GPIO_PORTF_AHB_DATA_R   (*((volatile uint32_t *)0x4005D3FC))
#define GPIO_PORTF_AHB_DIR_R    (*((volatile uint32_t *)0x4005D400))
#define GPIO_PORTF_AHB_IS_R     (*((volatile uint32_t *)0x4005D404))
#define GPIO_PORTF_AHB_IBE_R    (*((volatile uint32_t *)0x4005D408))
#define GPIO_PORTF_AHB_IEV_R    (*((volatile uint32_t *)0x4005D40C))
#define GPIO_PORTF_AHB_IM_R     (*((volatile uint32_t *)0x4005D410))
#define GPIO_PORTF_AHB_RIS_R    (*((volatile uint32_t *)0x4005D414))
#define GPIO_PORTF_AHB_MIS_R    (*((volatile uint32_t *)0x4005D418))
#define GPIO_PORTF_AHB_ICR_R    (*((volatile uint32_t *)0x4005D41C))
#define GPIO_PORTF_AHB_AFSEL_R  (*((volatile uint32_t *)0x4005D420))
#define GPIO_PORTF_AHB_DR2R_R   (*((volatile uint32_t *)0x4005D500))
#define GPIO_PORTF_AHB_DR4R_R   (*((volatile uint32_t *)0x4005D504))
#define GPIO_PORTF_AHB_DR8R_R   (*((volatile uint32_t *)0x4005D508))
#define GPIO_PORTF_AHB_ODR_R    (*((volatile uint32_t *)0x4005D50C))
#define GPIO_PORTF_AHB_PUR_R    (*((volatile uint32_t *)0x4005D510))
#define GPIO_PORTF_AHB_PDR_R    (*((volatile uint32_t *)0x4005D514))
#define GPIO_PORTF_AHB_SLR_R    (*((volatile uint32_t *)0x4005D518))
#define GPIO_PORTF_AHB_DEN_R    (*((volatile uint32_t *)0x4005D51C))
#define GPIO_PORTF_AHB_LOCK_R   (*((volatile uint32_t *)0x4005D520))
#define GPIO_PORTF_AHB_CR_R     (*((volatile uint32_t *)0x4005D524))
#define GPIO_PORTF_AHB_AMSEL_R  (*((volatile uint32_t *)0x4005D528))
#define GPIO_PORTF_AHB_PCTL_R   (*((volatile uint32_t *)0x4005D52C))
#define GPIO_PORTF_AHB_ADCCTL_R (*((volatile uint32_t *)0x4005D530))
#define GPIO_PORTF_AHB_DMACTL_R (*((volatile uint32_t *)0x4005D534))

//*****************************************************************************
//
// GPIO registers (PORTG AHB)
//
//*****************************************************************************
#define GPIO_PORTG_AHB_DATA_BITS_R                                            \
                                ((volatile uint32_t *)0x4005E000)
#define GPIO_PORTG_AHB_DATA_R   (*((volatile uint32_t *)0x4005E3FC))
#define GPIO_PORTG_AHB_DIR_R    (*((volatile uint32_t *)0x4005E400))
#define GPIO_PORTG_AHB_IS_R     (*((volatile uint32_t *)0x4005E404))
#define GPIO_PORTG_AHB_IBE_R    (*((volatile uint32_t *)0x4005E408))
#define GPIO_PORTG_AHB_IEV_R    (*((volatile uint32_t *)0x4005E40C))
#define GPIO_PORTG_AHB_IM_R     (*((volatile uint32_t *)0x4005E410))
#define GPIO_PORTG_AHB_RIS_R    (*((volatile uint32_t *)0x4005E414))
#define GPIO_PORTG_AHB_MIS_R    (*((volatile uint32_t *)0x4005E418))
#define GPIO_PORTG_AHB_ICR_R    (*((volatile uint32_t *)0x4005E41C))
#define GPIO_PORTG_AHB_AFSEL_R  (*((volatile uint32_t *)0x4005E420))
#define GPIO_PORTG_AHB_DR2R_R   (*((volatile uint32_t *)0x4005E500))
#define GPIO_PORTG_AHB_DR4R_R   (*((volatile uint32_t *)0x4005E504))
#define GPIO_PORTG_AHB_DR8R_R   (*((volatile uint32_t *)0x4005E508))
#define GPIO_PORTG_AHB_ODR_R    (*((volatile uint32_t *)0x4005E50C))
#define GPIO_PORTG_AHB_PUR_R    (*((volatile uint32_t *)0x4005E510))
#define GPIO_PORTG_AHB_PDR_R    (*((volatile uint32_t *)0x4005E514))
#define GPIO_PORTG_AHB_SLR_R    (*((volatile uint32_t *)0x4005E518))
#define GPIO_PORTG_AHB_DEN_R    (*((volatile uint32_t *)0x4005E51C))
#define GPIO_PORTG_AHB_LOCK_R   (*((volatile uint32_t *)0x4005E520))
#define GPIO_PORTG_AHB_CR_R     (*((volatile uint32_t *)0x4005E524))
#define GPIO_PORTG_AHB_AMSEL_R  (*((volatile uint32_t *)0x4005E528))
#define GPIO_PORTG_AHB_PCTL_R   (*((volatile uint32_t *)0x4005E52C))
#define GPIO_PORTG_AHB_ADCCTL_R (*((volatile uint32_t *)0x4005E530))
#define GPIO_PORTG_AHB_DMACTL_R (*((volatile uint32_t *)0x4005E534))

//*****************************************************************************
//
// EEPROM registers (EEPROM)
//
//*****************************************************************************
#define EEPROM_EESIZE_R         (*((volatile uint32_t *)0x400AF000))
#define EEPROM_EEBLOCK_R        (*((volatile uint32_t *)0x400AF004))
#define EEPROM_EEOFFSET_R       (*((volatile uint32_t *)0x400AF008))
#define EEPROM_EERDWR_R         (*((volatile uint32_t *)0x400AF010))
#define EEPROM_EERDWRINC_R      (*((volatile uint32_t *)0x400AF014))
#define EEPROM_EEDONE_R         (*((volatile uint32_t *)0x400AF018))
#define EEPROM_EESUPP_R         (*((volatile uint32_t *)0x400AF01C))
#define EEPROM_EEUNLOCK_R       (*((volatile uint32_t *)0x400AF020))
#define EEPROM_EEPROT_R         (*((volatile uint32_t *)0x400AF030))
#define EEPROM_EEPASS0_R        (*((volatile uint32_t *)0x400AF034))
#define EEPROM_EEPASS1_R        (*((volatile uint32_t *)0x400AF038))
#define EEPROM_EEPASS2_R        (*((volatile uint32_t *)0x400AF03C))
#define EEPROM_EEINT_R          (*((volatile uint32_t *)0x400AF040))
#define EEPROM_EEHIDE_R         (*((volatile uint32_t *)0x400AF050))
#define EEPROM_EEDBGME_R        (*((volatile uint32_t *)0x400AF080))
#define EEPROM_PP_R             (*((volatile uint32_t *)0x400AFFC0))

//*****************************************************************************
//
// I2C registers (I2C4)
//
//*****************************************************************************
#define I2C4_MSA_R              (*((volatile uint32_t *)0x400C0000))
#define I2C4_MCS_R              (*((volatile uint32_t *)0x400C0004))
#define I2C4_MDR_R              (*((volatile uint32_t *)0x400C0008))
#define I2C4_MTPR_R             (*((volatile uint32_t *)0x400C000C))
#define I2C4_MIMR_R             (*((volatile uint32_t *)0x400C0010))
#define I2C4_MRIS_R             (*((volatile uint32_t *)0x400C0014))
#define I2C4_MMIS_R             (*((volatile uint32_t *)0x400C0018))
#define I2C4_MICR_R             (*((volatile uint32_t *)0x400C001C))
#define I2C4_MCR_R              (*((volatile uint32_t *)0x400C0020))
#define I2C4_MCLKOCNT_R         (*((volatile uint32_t *)0x400C0024))
#define I2C4_MBMON_R            (*((volatile uint32_t *)0x400C002C))
#define I2C4_MCR2_R             (*((volatile uint32_t *)0x400C0038))
#define I2C4_SOAR_R             (*((volatile uint32_t *)0x400C0800))
#define I2C4_SCSR_R             (*((volatile uint32_t *)0x400C0804))
#define I2C4_SDR_R              (*((volatile uint32_t *)0x400C0808))
#define I2C4_SIMR_R             (*((volatile uint32_t *)0x400C080C))
#define I2C4_SRIS_R             (*((volatile uint32_t *)0x400C0810))
#define I2C4_SMIS_R             (*((volatile uint32_t *)0x400C0814))
#define I2C4_SICR_R             (*((volatile uint32_t *)0x400C0818))
#define I2C4_SOAR2_R            (*((volatile uint32_t *)0x400C081C))
#define I2C4_SACKCTL_R          (*((volatile uint32_t *)0x400C0820))
#define I2C4_PP_R               (*((volatile uint32_t *)0x400C0FC0))
#define I2C4_PC_R               (*((volatile uint32_t *)0x400C0FC4))

//*****************************************************************************
//
// I2C registers (I2C5)
//
//*****************************************************************************
#define I2C5_MSA_R              (*((volatile uint32_t *)0x400C1000))
#define I2C5_MCS_R              (*((volatile uint32_t *)0x400C1004))
#define I2C5_MDR_R              (*((volatile uint32_t *)0x400C1008))
#define I2C5_MTPR_R             (*((volatile uint32_t *)0x400C100C))
#define I2C5_MIMR_R             (*((volatile uint32_t *)0x400C1010))
#define I2C5_MRIS_R             (*((volatile uint32_t *)0x400C1014))
#define I2C5_MMIS_R             (*((volatile uint32_t *)0x400C1018))
#define I2C5_MICR_R             (*((volatile uint32_t *)0x400C101C))
#define I2C5_MCR_R              (*((volatile uint32_t *)0x400C1020))
#define I2C5_MCLKOCNT_R         (*((volatile uint32_t *)0x400C1024))
#define I2C5_MBMON_R            (*((volatile uint32_t *)0x400C102C))
#define I2C5_MCR2_R             (*((volatile uint32_t *)0x400C1038))
#define I2C5_SOAR_R             (*((volatile uint32_t *)0x400C1800))
#define I2C5_SCSR_R             (*((volatile uint32_t *)0x400C1804))
#define I2C5_SDR_R              (*((volatile uint32_t *)0x400C1808))
#define I2C5_SIMR_R             (*((volatile uint32_t *)0x400C180C))
#define I2C5_SRIS_R             (*((volatile uint32_t *)0x400C1810))
#define I2C5_SMIS_R             (*((volatile uint32_t *)0x400C1814))
#define I2C5_SICR_R             (*((volatile uint32_t *)0x400C1818))
#define I2C5_SOAR2_R            (*((volatile uint32_t *)0x400C181C))
#define I2C5_SACKCTL_R          (*((volatile uint32_t *)0x400C1820))
#define I2C5_PP_R               (*((volatile uint32_t *)0x400C1FC0))
#define I2C5_PC_R               (*((volatile uint32_t *)0x400C1FC4))

//*****************************************************************************
//
// System Exception Module registers (SYSEXC)
//
//*****************************************************************************
#define SYSEXC_RIS_R            (*((volatile uint32_t *)0x400F9000))
#define SYSEXC_IM_R             (*((volatile uint32_t *)0x400F9004))
#define SYSEXC_MIS_R            (*((volatile uint32_t *)0x400F9008))
#define SYSEXC_IC_R             (*((volatile uint32_t *)0x400F900C))

//*****************************************************************************
//
// FLASH registers (FLASH CTRL)
//
//*****************************************************************************
#define FLASH_FMA_R             (*((volatile uint32_t *)0x400FD000))
#define FLASH_FMD_R             (*((volatile uint32_t *)0x400FD004))
#define FLASH_FMC_R             (*((volatile uint32_t *)0x400FD008))
#define FLASH_FCRIS_R           (*((volatile uint32_t *)0x400FD00C))
#define FLASH_FCIM_R            (*((volatile uint32_t *)0x400FD010))
#define FLASH_FCMISC_R          (*((volatile uint32_t *)0x400FD014))
#define FLASH_FMC2_R            (*((volatile uint32_t *)0x400FD020))
#define FLASH_FWBVAL_R          (*((volatile uint32_t *)0x400FD030))
#define FLASH_FWBN_R            (*((volatile uint32_t *)0x400FD100))
#define FLASH_FSIZE_R           (*((volatile uint32_t *)0x400FDFC0))
#define FLASH_SSIZE_R           (*((volatile uint32_t *)0x400FDFC4))
#define FLASH_ROMSWMAP_R        (*((volatile uint32_t *)0x400FDFCC))
#define FLASH_RMCTL_R           (*((volatile uint32_t *)0x400FE0F0))
#define FLASH_BOOTCFG_R         (*((volatile uint32_t *)0x400FE1D0))
#define FLASH_USERREG0_R        (*((volatile uint32_t *)0x400FE1E0))
#define FLASH_USERREG1_R        (*((volatile uint32_t *)0x400FE1E4))
#define FLASH_USERREG2_R        (*((volatile uint32_t *)0x400FE1E8))
#define FLASH_USERREG3_R        (*((volatile uint32_t *)0x400FE1EC))
#define FLASH_FMPRE0_R          (*((volatile uint32_t *)0x400FE200))
#define FLASH_FMPRE1_R          (*((volatile uint32_t *)0x400FE204))
#define FLASH_FMPPE0_R          (*((volatile uint32_t *)0x400FE400))
#define FLASH_FMPPE1_R          (*((volatile uint32_t *)0x400FE404))

//*****************************************************************************
//
// System Control registers (SYSCTL)
//
//*****************************************************************************
#define SYSCTL_DID0_R           (*((volatile uint32_t *)0x400FE000))
#define SYSCTL_DID1_R           (*((volatile uint32_t *)0x400FE004))
#define SYSCTL_DC0_R            (*((volatile uint32_t *)0x400FE008))
#define SYSCTL_DC1_R            (*((volatile uint32_t *)0x400FE010))
#define SYSCTL_DC2_R            (*((volatile uint32_t *)0x400FE014))
#define SYSCTL_DC3_R            (*((volatile uint32_t *)0x400FE018))
#define SYSCTL_DC4_R            (*((volatile uint32_t *)0x400FE01C))
#define SYSCTL_DC5_R            (*((volatile uint32_t *)0x400FE020))
#define SYSCTL_DC6_R            (*((volatile uint32_t *)0x400FE024))
#define SYSCTL_DC7_R            (*((volatile uint32_t *)0x400FE028))
#define SYSCTL_DC8_R            (*((volatile uint32_t *)0x400FE02C))
#define SYSCTL_PBORCTL_R        (*((volatile uint32_t *)0x400FE030))
#define SYSCTL_SRCR0_R          (*((volatile uint32_t *)0x400FE040))
#define SYSCTL_SRCR1_R          (*((volatile uint32_t *)0x400FE044))
#define SYSCTL_SRCR2_R          (*((volatile uint32_t *)0x400FE048))
#define SYSCTL_RIS_R            (*((volatile uint32_t *)0x400FE050))
#define SYSCTL_IMC_R            (*((volatile uint32_t *)0x400FE054))
#define SYSCTL_MISC_R           (*((volatile uint32_t *)0x400FE058))
#define SYSCTL_RESC_R           (*((volatile uint32_t *)0x400FE05C))
#define SYSCTL_RCC_R            (*((volatile uint32_t *)0x400FE060))
#define SYSCTL_GPIOHBCTL_R      (*((volatile uint32_t *)0x400FE06C))
#define SYSCTL_RCC2_R           (*((volatile uint32_t *)0x400FE070))
#define SYSCTL_MOSCCTL_R        (*((volatile uint32_t *)0x400FE07C))
#define SYSCTL_RCGC0_R          (*((volatile uint32_t *)0x400FE100))
#define SYSCTL_RCGC1_R          (*((volatile uint32_t *)0x400FE104))
#define SYSCTL_RCGC2_R          (*((volatile uint32_t *)0x400FE108))
#define SYSCTL_SCGC0_R          (*((volatile uint32_t *)0x400FE110))
#define SYSCTL_SCGC1_R          (*((volatile uint32_t *)0x400FE114))
#define SYSCTL_SCGC2_R          (*((volatile uint32_t *)0x400FE118))
#define SYSCTL_DCGC0_R          (*((volatile uint32_t *)0x400FE120))
#define SYSCTL_DCGC1_R          (*((volatile uint32_t *)0x400FE124))
#define SYSCTL_DCGC2_R          (*((volatile uint32_t *)0x400FE128))
#define SYSCTL_DSLPCLKCFG_R     (*((volatile uint32_t *)0x400FE144))
#define SYSCTL_SYSPROP_R        (*((volatile uint32_t *)0x400FE14C))
#define SYSCTL_PIOSCCAL_R       (*((volatile uint32_t *)0x400FE150))
#define SYSCTL_PLLFREQ0_R       (*((volatile uint32_t *)0x400FE160))
#define SYSCTL_PLLFREQ1_R       (*((volatile uint32_t *)0x400FE164))
#define SYSCTL_PLLSTAT_R        (*((volatile uint32_t *)0x400FE168))
#define SYSCTL_SLPPWRCFG_R      (*((volatile uint32_t *)0x400FE188))
#define SYSCTL_DSLPPWRCFG_R     (*((volatile uint32_t *)0x400FE18C))
#define SYSCTL_DC9_R            (*((volatile uint32_t *)0x400FE190))
#define SYSCTL_NVMSTAT_R        (*((volatile uint32_t *)0x400FE1A0))
#define SYSCTL_LDOSPCTL_R       (*((volatile uint32_t *)0x400FE1B4))
#define SYSCTL_LDODPCTL_R       (*((volatile uint32_t *)0x400FE1BC))
#define SYSCTL_PPWD_R           (*((volatile uint32_t *)0x400FE300))
#define SYSCTL_PPTIMER_R        (*((volatile uint32_t *)0x400FE304))
#define SYSCTL_PPGPIO_R         (*((volatile uint32_t *)0x400FE308))
#define SYSCTL_PPDMA_R          (*((volatile uint32_t *)0x400FE30C))
#define SYSCTL_PPHIB_R          (*((volatile uint32_t *)0x400FE314))
#define SYSCTL_PPUART_R         (*((volatile uint32_t *)0x400FE318))
#define SYSCTL_PPSSI_R          (*((volatile uint32_t *)0x400FE31C))
#define SYSCTL_PPI2C_R          (*((volatile uint32_t *)0x400FE320))
#define SYSCTL_PPUSB_R          (*((volatile uint32_t *)0x400FE328))
#define SYSCTL_PPCAN_R          (*((volatile uint32_t *)0x400FE334))
#define SYSCTL_PPADC_R          (*((volatile uint32_t *)0x400FE338))
#define SYSCTL_PPACMP_R         (*((volatile uint32_t *)0x400FE33C))
#define SYSCTL_PPPWM_R          (*((volatile uint32_t *)0x400FE340))
#define SYSCTL_PPQEI_R          (*((volatile uint32_t *)0x400FE344))
#define SYSCTL_PPEEPROM_R       (*((volatile uint32_t *)0x400FE358))
#define SYSCTL_PPWTIMER_R       (*((volatile uint32_t *)0x400FE35C))
#define SYSCTL_SRWD_R           (*((volatile uint32_t *)0x400FE500))
#define SYSCTL_SRTIMER_R        (*((volatile uint32_t *)0x400FE504))
#define SYSCTL_SRGPIO_R         (*((volatile uint32_t *)0x400FE508))
#define SYSCTL_SRDMA_R          (*((volatile uint32_t *)0x400FE50C))
#define SYSCTL_SRUART_R         (*((volatile uint32_t *)0x400FE518))
#define SYSCTL_SRSSI_R          (*((volatile uint32_t *)0x400FE51C))
#define SYSCTL_SRI2C_R          (*((volatile uint32_t *)0x400FE520))
#define SYSCTL_SRCAN_R          (*((volatile uint32_t *)0x400FE534))
#define SYSCTL_SRADC_R          (*((volatile uint32_t *)0x400FE538))
#define SYSCTL_SRACMP_R         (*((volatile uint32_t *)0x400FE53C))
#define SYSCTL_SREEPROM_R       (*((volatile uint32_t *)0x400FE558))
#define SYSCTL_SRWTIMER_R       (*((volatile uint32_t *)0x400FE55C))
#define SYSCTL_RCGCWD_R         (*((volatile uint32_t *)0x400FE600))
#define SYSCTL_RCGCTIMER_R      (*((volatile uint32_t *)0x400FE604))
#define SYSCTL_RCGCGPIO_R       (*((volatile uint32_t *)0x400FE608))
#define SYSCTL_RCGCDMA_R        (*((volatile uint32_t *)0x400FE60C))
#define SYSCTL_RCGCUART_R       (*((volatile uint32_t *)0x400FE618))
#define SYSCTL_RCGCSSI_R        (*((volatile uint32_t *)0x400FE61C))
#define SYSCTL_RCGCI2C_R        (*((volatile uint32_t *)0x400FE620))
#define SYSCTL_RCGCCAN_R        (*((volatile uint32_t *)0x400FE634))
#define SYSCTL_RCGCADC_R        (*((volatile uint32_t *)0x400FE638))
#define SYSCTL_RCGCACMP_R       (*((volatile uint32_t *)0x400FE63C))
#define SYSCTL_RCGCEEPROM_R     (*((volatile uint32_t *)0x400FE658))
#define SYSCTL_RCGCWTIMER_R     (*((volatile uint32_t *)0x400FE65C))
#define SYSCTL_SCGCWD_R         (*((volatile uint32_t *)0x400FE700))
#define SYSCTL_SCGCTIMER_R      (*((volatile uint32_t *)0x400FE704))
#define SYSCTL_SCGCGPIO_R       (*((volatile uint32_t *)0x400FE708))
#define SYSCTL_SCGCDMA_R        (*((volatile uint32_t *)0x400FE70C))
#define SYSCTL_SCGCUART_R       (*((volatile uint32_t *)0x400FE718))
#define SYSCTL_SCGCSSI_R        (*((volatile uint32_t *)0x400FE71C))
#define SYSCTL_SCGCI2C_R        (*((volatile uint32_t *)0x400FE720))
#define SYSCTL_SCGCCAN_R        (*((volatile uint32_t *)0x400FE734))
#define SYSCTL_SCGCADC_R        (*((volatile uint32_t *)0x400FE738))
#define SYSCTL_SCGCACMP_R       (*((volatile uint32_t *)0x400FE73C))
#define SYSCTL_SCGCEEPROM_R     (*((volatile uint32_t *)0x400FE758))
#define SYSCTL_SCGCWTIMER_R     (*((volatile uint32_t *)0x400FE75C))
#define SYSCTL_DCGCWD_R         (*((volatile uint32_t *)0x400FE800))
#define SYSCTL_DCGCTIMER_R      (*((volatile uint32_t *)0x400FE804))
#define SYSCTL_DCGCGPIO_R       (*((volatile uint32_t *)0x400FE808))
#define SYSCTL_DCGCDMA_R        (*((volatile uint32_t *)0x400FE80C))
#define SYSCTL_DCGCUART_R       (*((volatile uint32_t *)0x400FE818))
#define SYSCTL_DCGCSSI_R        (*((volatile uint32_t *)0x400FE81C))
#define SYSCTL_DCGCI2C_R        (*((volatile uint32_t *)0x400FE820))
#define SYSCTL_DCGCCAN_R        (*((volatile uint32_t *)0x400FE834))
#define SYSCTL_DCGCADC_R        (*((volatile uint32_t *)0x400FE838))
#define SYSCTL_DCGCACMP_R       (*((volatile uint32_t *)0x400FE83C))
#define SYSCTL_DCGCEEPROM_R     (*((volatile uint32_t *)0x400FE858))
#define SYSCTL_DCGCWTIMER_R     (*((volatile uint32_t *)0x400FE85C))
#define SYSCTL_PRWD_R           (*((volatile uint32_t *)0x400FEA00))
#define SYSCTL_PRTIMER_R        (*((volatile uint32_t *)0x400FEA04))
#define SYSCTL_PRGPIO_R         (*((volatile uint32_t *)0x400FEA08))
#define SYSCTL_PRDMA_R          (*((volatile uint32_t *)0x400FEA0C))
#define SYSCTL_PRUART_R         (*((volatile uint32_t *)0x400FEA18))
#define SYSCTL_PRSSI_R          (*((volatile uint32_t *)0x400FEA1C))
#define SYSCTL_PRI2C_R          (*((volatile uint32_t *)0x400FEA20))
#define SYSCTL_PRCAN_R          (*((volatile uint32_t *)0x400FEA34))
#define SYSCTL_PRADC_R          (*((volatile uint32_t *)0x400FEA38))
#define SYSCTL_PRACMP_R         (*((volatile uint32_t *)0x400FEA3C))
#define SYSCTL_PREEPROM_R       (*((volatile uint32_t *)0x400FEA58))
#define SYSCTL_PRWTIMER_R       (*((volatile uint32_t *)0x400FEA5C))

//*****************************************************************************
//
// Micro Direct Memory Access registers (UDMA)
//
//*****************************************************************************
#define UDMA_STAT_R             (*((volatile uint32_t *)0x400FF000))
#define UDMA_CFG_R              (*((volatile uint32_t *)0x400FF004))
#define UDMA_CTLBASE_R          (*((volatile uint32_t *)0x400FF008))
#define UDMA_ALTBASE_R          (*((volatile uint32_t *)0x400FF00C))
#define UDMA_WAITSTAT_R         (*((volatile uint32_t *)0x400FF010))
#define UDMA_SWREQ_R            (*((volatile uint32_t *)0x400FF014))
#define UDMA_USEBURSTSET_R      (*((volatile uint32_t *)0x400FF018))
#define UDMA_USEBURSTCLR_R      (*((volatile uint32_t *)0x400FF01C))
#define UDMA_REQMASKSET_R       (*((volatile uint32_t *)0x400FF020))
#define UDMA_REQMASKCLR_R       (*((volatile uint32_t *)0x400FF024))
#define UDMA_ENASET_R           (*((volatile uint32_t *)0x400FF028))
#define UDMA_ENACLR_R           (*((volatile uint32_t *)0x400FF02C))
#define UDMA_ALTSET_R           (*((volatile uint32_t *)0x400FF030))
#define UDMA_ALTCLR_R           (*((volatile uint32_t *)0x400FF034))
#define UDMA_PRIOSET_R          (*((volatile uint32_t *)0x400FF038))
#define UDMA_PRIOCLR_R          (*((volatile uint32_t *)0x400FF03C))
#define UDMA_ERRCLR_R           (*((volatile uint32_t *)0x400FF04C))
#define UDMA_CHASGN_R           (*((volatile uint32_t *)0x400FF500))
#define UDMA_CHIS_R             (*((volatile uint32_t *)0x400FF504))
#define UDMA_CHMAP0_R           (*((volatile uint32_t *)0x400FF510))
#define UDMA_CHMAP1_R           (*((volatile uint32_t *)0x400FF514))
#define UDMA_CHMAP2_R           (*((volatile uint32_t *)0x400FF518))
#define UDMA_CHMAP3_R           (*((volatile uint32_t *)0x400FF51C))

//*****************************************************************************
//
// Micro Direct Memory Access (uDMA) offsets (UDMA)
//
//*****************************************************************************
#define UDMA_SRCENDP            0x00000000  // DMA Channel Source Address End
                                            // Pointer
#define UDMA_DSTENDP            0x00000004  // DMA Channel Destination Address
                                            // End Pointer
#define UDMA_CHCTL              0x00000008  // DMA Channel Control Word

//*****************************************************************************
//
// NVIC registers (NVIC)
//
//*****************************************************************************
#define NVIC_ACTLR_R            (*((volatile uint32_t *)0xE000E008))
#define NVIC_ST_CTRL_R          (*((volatile uint32_t *)0xE000E010))
#define NVIC_ST_RELOAD_R        (*((volatile uint32_t *)0xE000E014))
#define NVIC_ST_CURRENT_R       (*((volatile uint32_t *)0xE000E018))
#define NVIC_EN0_R              (*((volatile uint32_t *)0xE000E100))
#define NVIC_EN1_R              (*((volatile uint32_t *)0xE000E104))
#define NVIC_EN2_R              (*((volatile uint32_t *)0xE000E108))
#define NVIC_EN3_R              (*((volatile uint32_t *)0xE000E10C))
#define NVIC_EN4_R              (*((volatile uint32_t *)0xE000E110))
#define NVIC_DIS0_R             (*((volatile uint32_t *)0xE000E180))
#define NVIC_DIS1_R             (*((volatile uint32_t *)0xE000E184))
#define NVIC_DIS2_R             (*((volatile uint32_t *)0xE000E188))
#define NVIC_DIS3_R             (*((volatile uint32_t *)0xE000E18C))
#define NVIC_DIS4_R             (*((volatile uint32_t *)0xE000E190))
#define NVIC_PEND0_R            (*((volatile uint32_t *)0xE000E200))
#define NVIC_PEND1_R            (*((volatile uint32_t *)0xE000E204))
#define NVIC_PEND2_R            (*((volatile uint32_t *)0xE000E208))
#define NVIC_PEND3_R            (*((volatile uint32_t *)0xE000E20C))
#define NVIC_PEND4_R            (*((volatile uint32_t *)0xE000E210))
#define NVIC_UNPEND0_R          (*((volatile uint32_t *)0xE000E280))
#define NVIC_UNPEND1_R          (*((volatile uint32_t *)0xE000E284))
#define NVIC_UNPEND2_R          (*((volatile uint32_t *)0xE000E288))
#define NVIC_UNPEND3_R          (*((volatile uint32_t *)0xE000E28C))
#define NVIC_UNPEND4_R          (*((volatile uint32_t *)0xE000E290))
#define NVIC_ACTIVE0_R          (*((volatile uint32_t *)0xE000E300))
#define NVIC_ACTIVE1_R          (*((volatile uint32_t *)0xE000E304))
#define NVIC_ACTIVE2_R          (*((volatile uint32_t *)0xE000E308))
#define NVIC_ACTIVE3_R          (*((volatile uint32_t *)0xE000E30C))
#define NVIC_ACTIVE4_R          (*((volatile uint32_t *)0xE000E310))
#define NVIC_PRI0_R             (*((volatile uint32_t *)0xE000E400))
#define NVIC_PRI1_R             (*((volatile uint32_t *)0xE000E404))
#define NVIC_PRI2_R             (*((volatile uint32_t *)0xE000E408))
#define NVIC_PRI3_R             (*((volatile uint32_t *)0xE000E40C))
#define NVIC_PRI4_R             (*((volatile uint32_t *)0xE000E410))
#define NVIC_PRI5_R             (*((volatile uint32_t *)0xE000E414))
#define NVIC_PRI6_R             (*((volatile uint32_t *)0xE000E418))
#define NVIC_PRI7_R             (*((volatile uint32_t *)0xE000E41C))
#define NVIC_PRI8_R             (*((volatile uint32_t *)0xE000E420))
#define NVIC_PRI9_R             (*((volatile uint32_t *)0xE000E424))
#define NVIC_PRI10_R            (*((volatile uint32_t *)0xE000E428))
#define NVIC_PRI11_R            (*((volatile uint32_t *)0xE000E42C))
#define NVIC_PRI12_R            (*((volatile uint32_t *)0xE000E430))
#define NVIC_PRI13_R            (*((volatile uint32_t *)0xE000E434))
#define NVIC_PRI14_R            (*((volatile uint32_t *)0xE000E438))
#define NVIC_PRI15_R            (*((volatile uint32_t *)0xE000E43C))
#define NVIC_PRI16_R            (*((volatile uint32_t *)0xE000E440))
#define NVIC_PRI17_R            (*((volatile uint32_t *)0xE000E444))
#define NVIC_PRI18_R            (*((volatile uint32_t *)0xE000E448))
#define NVIC_PRI19_R            (*((volatile uint32_t *)0xE000E44C))
#define NVIC_PRI20_R            (*((volatile uint32_t *)0xE000E450))
#define NVIC_PRI21_R            (*((volatile uint32_t *)0xE000E454))
#define NVIC_PRI22_R            (*((volatile uint32_t *)0xE000E458))
#define NVIC_PRI23_R            (*((volatile uint32_t *)0xE000E45C))
#define NVIC_PRI24_R            (*((volatile uint32_t *)0xE000E460))
#define NVIC_PRI25_R            (*((volatile uint32_t *)0xE000E464))
#define NVIC_PRI26_R            (*((volatile uint32_t *)0xE000E468))
#define NVIC_PRI27_R            (*((volatile uint32_t *)0xE000E46C))
#define NVIC_PRI28_R            (*((volatile uint32_t *)0xE000E470))
#define NVIC_PRI29_R            (*((volatile uint32_t *)0xE000E474))
#define NVIC_PRI30_R            (*((volatile uint32_t *)0xE000E478))
#define NVIC_PRI31_R            (*((volatile uint32_t *)0xE000E47C))
#define NVIC_PRI32_R            (*((volatile uint32_t *)0xE000E480))
#define NVIC_PRI33_R            (*((volatile uint32_t *)0xE000E484))
#define NVIC_PRI34_R            (*((volatile uint32_t *)0xE000E488))
#define NVIC_CPUID_R            (*((volatile uint32_t *)0xE000ED00))
#define NVIC_INT_CTRL_R         (*((volatile uint32_t *)0xE000ED04))
#define NVIC_VTABLE_R           (*((volatile uint32_t *)0xE000ED08))
#define NVIC_APINT_R            (*((volatile uint32_t *)0xE000ED0C))
#define NVIC_SYS_CTRL_R         (*((volatile uint32_t *)0xE000ED10))
#define NVIC_CFG_CTRL_R         (*((volatile uint32_t *)0xE000ED14))
#define NVIC_SYS_PRI1_R         (*((volatile uint32_t *)0xE000ED18))
#define NVIC_SYS_PRI2_R         (*((volatile uint32_t *)0xE000ED1C))
#define NVIC_SYS_PRI3_R         (*((volatile uint32_t *)0xE000ED20))
#define NVIC_SYS_HND_CTRL_R     (*((volatile uint32_t *)0xE000ED24))
#define NVIC_FAULT_STAT_R       (*((volatile uint32_t *)0xE000ED28))
#define NVIC_HFAULT_STAT_R      (*((volatile uint32_t *)0xE000ED2C))
#define NVIC_DEBUG_STAT_R       (*((volatile uint32_t *)0xE000ED30))
#define NVIC_MM_ADDR_R          (*((volatile uint32_t *)0xE000ED34))
#define NVIC_FAULT_ADDR_R       (*((volatile uint32_t *)0xE000ED38))
#define NVIC_CPAC_R             (*((volatile uint32_t *)0xE000ED88))
#define NVIC_MPU_TYPE_R         (*((volatile uint32_t *)0xE000ED90))
#define NVIC_MPU_CTRL_R         (*((volatile uint32_t *)0xE000ED94))
#define NVIC_MPU_NUMBER_R       (*((volatile uint32_t *)0xE000ED98))
#define NVIC_MPU_BASE_R         (*((volatile uint32_t *)0xE000ED9C))
#define NVIC_MPU_ATTR_R         (*((volatile uint32_t *)0xE000EDA0))
#define NVIC_MPU_BASE1_R        (*((volatile uint32_t *)0xE000EDA4))
#define NVIC_MPU_ATTR1_R        (*((volatile uint32_t *)0xE000EDA8))
#define NVIC_MPU_BASE2_R        (*((volatile uint32_t *)0xE000EDAC))
#define NVIC_MPU_ATTR2_R        (*((volatile uint32_t *)0xE000EDB0))
#define NVIC_MPU_BASE3_R        (*((volatile uint32_t *)0xE000EDB4))
#define NVIC_MPU_ATTR3_R        (*((volatile uint32_t *)0xE000EDB8))
#define NVIC_DBG_CTRL_R         (*((volatile uint32_t *)0xE000EDF0))
#define NVIC_DBG_XFER_R         (*((volatile uint32_t *)0xE000EDF4))
#define NVIC_DBG_DATA_R         (*((volatile uint32_t *)0xE000EDF8))
#define NVIC_DBG_INT_R          (*((volatile uint32_t *)0xE000EDFC))
#define NVIC_SW_TRIG_R          (*((volatile uint32_t *)0xE000EF00))
#define NVIC_FPCC_R             (*((volatile uint32_t *)0xE000EF34))
#define NVIC_FPCA_R             (*((volatile uint32_t *)0xE000EF38))
#define NVIC_FPDSC_R            (*((volatile uint32_t *)0xE000EF3C))

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOAD register.
//
//*****************************************************************************
#define WDT_LOAD_M              0xFFFFFFFF  // Watchdog Load Value
#define WDT_LOAD_S              0

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_VALUE register.
//
//*****************************************************************************
#define WDT_VALUE_M             0xFFFFFFFF  // Watchdog Value
#define WDT_VALUE_S             0

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_CTL register.
//
//*****************************************************************************
#define WDT_CTL_WRC             0x80000000  // Write Complete
#define WDT_CTL_INTTYPE         0x00000004  // Watchdog Interrupt Type
#define WDT_CTL_RESEN           0x00000002  // Watchdog Reset Enable
#define WDT_CTL_INTEN           0x00000001  // Watchdog Interrupt Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_ICR register.
//
//*****************************************************************************
#define WDT_ICR_M               0xFFFFFFFF  // Watchdog Interrupt Clear
#define WDT_ICR_S               0

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_RIS register.
//
//*****************************************************************************
#define WDT_RIS_WDTRIS          0x00000001  // Watchdog Raw Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_MIS register.
//
//*****************************************************************************
#define WDT_MIS_WDTMIS          0x00000001  // Watchdog Masked Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_TEST register.
//
//*****************************************************************************
#define WDT_TEST_STALL          0x00000100  // Watchdog Stall Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOCK register.
//
//*****************************************************************************
#define WDT_LOCK_M              0xFFFFFFFF  // Watchdog Lock
#define WDT_LOCK_UNLOCKED       0x00000000  // Unlocked
#define WDT_LOCK_LOCKED         0x00000001  // Locked
#define WDT_LOCK_UNLOCK         0x1ACCE551  // Unlocks the watchdog timer

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_IM register.
//
//*****************************************************************************
#define GPIO_IM_GPIO_M          0x000000FF  // GPIO Interrupt Mask Enable
#define GPIO_IM_GPIO_S          0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_RIS register.
//
//*****************************************************************************
#define GPIO_RIS_GPIO_M         0x000000FF  // GPIO Interrupt Raw Status
#define GPIO_RIS_GPIO_S         0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_MIS register.
//
//*****************************************************************************
#define GPIO_MIS_GPIO_M         0x000000FF  // GPIO Masked Interrupt Status
#define GPIO_MIS_GPIO_S         0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_ICR register.
//
//*****************************************************************************
#define GPIO_ICR_GPIO_M         0x000000FF  // GPIO Interrupt Clear
#define GPIO_ICR_GPIO_S         0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_LOCK register.
//
//*****************************************************************************
#define GPIO_LOCK_M             0xFFFFFFFF  // GPIO Lock
#define GPIO_LOCK_UNLOCKED      0x00000000  // The GPIOCR register is unlocked
                                            // and may be modified
#define GPIO_LOCK_LOCKED        0x00000001  // The GPIOCR register is locked
                                            // and may not be modified
#define GPIO_LOCK_KEY           0x4C4F434B  // Unlocks the GPIO_CR register

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_PCTL register for
// port A.
//
//*****************************************************************************
#define GPIO_PCTL_PA7_M         0xF0000000  // PA7 Mask
#define GPIO_PCTL_PA7_I2C1SDA   0x30000000  // I2C1SDA on PA7
#define GPIO_PCTL_PA6_M         0x0F000000  // PA6 Mask
#define GPIO_PCTL_PA6_I2C1SCL   0x03000000  // I2C1SCL on PA6
#define GPIO_PCTL_PA5_M         0x00F00000  // PA5 Mask
#define GPIO_PCTL_PA5_SSI0TX    0x00200000  // SSI0TX on PA5
#define GPIO_PCTL_PA4_M         0x000F0000  // PA4 Mask
#define GPIO_PCTL_PA4_SSI0RX    0x00020000  // SSI0RX on PA4
#define GPIO_PCTL_PA3_M         0x0000F000  // PA3 Mask
#define GPIO_PCTL_PA3_SSI0FSS   0x00002000  // SSI0FSS on PA3
#define GPIO_PCTL_PA2_M         0x00000F00  // PA2 Mask
#define GPIO_PCTL_PA2_SSI0CLK   0x00000200  // SSI0CLK on PA2
#define GPIO_PCTL_PA1_M         0x000000F0  // PA1 Mask
#define GPIO_PCTL_PA1_U0TX      0x00000010  // U0TX on PA1
#define GPIO_PCTL_PA0_M         0x0000000F  // PA0 Mask
#define GPIO_PCTL_PA0_U0RX      0x00000001  // U0RX on PA0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_PCTL register for
// port B.
//
//*****************************************************************************
#define GPIO_PCTL_PB7_M         0xF0000000  // PB7 Mask
#define GPIO_PCTL_PB7_SSI2TX    0x20000000  // SSI2TX on PB7
#define GPIO_PCTL_PB7_I2C5SDA   0x30000000  // I2C5SDA on PB7
#define GPIO_PCTL_PB7_T0CCP1    0x70000000  // T0CCP1 on PB7
#define GPIO_PCTL_PB6_M         0x0F000000  // PB6 Mask
#define GPIO_PCTL_PB6_SSI2RX    0x02000000  // SSI2RX on PB6
#define GPIO_PCTL_PB6_I2C5SCL   0x03000000  // I2C5SCL on PB6
#define GPIO_PCTL_PB6_T0CCP0    0x07000000  // T0CCP0 on PB6
#define GPIO_PCTL_PB5_M         0x00F00000  // PB5 Mask
#define GPIO_PCTL_PB5_SSI2FSS   0x00200000  // SSI2FSS on PB5
#define GPIO_PCTL_PB5_T1CCP1    0x00700000  // T1CCP1 on PB5
#define GPIO_PCTL_PB5_CAN0TX    0x00800000  // CAN0TX on PB5
#define GPIO_PCTL_PB4_M         0x000F0000  // PB4 Mask
#define GPIO_PCTL_PB4_SSI2CLK   0x00020000  // SSI2CLK on PB4
#define GPIO_PCTL_PB4_T1CCP0    0x00070000  // T1CCP0 on PB4
#define GPIO_PCTL_PB4_CAN0RX    0x00080000  // CAN0RX on PB4
#define GPIO_PCTL_PB3_M         0x0000F000  // PB3 Mask
#define GPIO_PCTL_PB3_I2C0SDA   0x00003000  // I2C0SDA on PB3
#define GPIO_PCTL_PB3_T3CCP1    0x00007000  // T3CCP1 on PB3
#define GPIO_PCTL_PB2_M         0x00000F00  // PB2 Mask
#define GPIO_PCTL_PB2_I2C0SCL   0x00000300  // I2C0SCL on PB2
#define GPIO_PCTL_PB2_T3CCP0    0x00000700  // T3CCP0 on PB2
#define GPIO_PCTL_PB1_M         0x000000F0  // PB1 Mask
#define GPIO_PCTL_PB1_U1TX      0x00000010  // U1TX on PB1
#define GPIO_PCTL_PB1_T2CCP1    0x00000070  // T2CCP1 on PB1
#define GPIO_PCTL_PB0_M         0x0000000F  // PB0 Mask
#define GPIO_PCTL_PB0_U1RX      0x00000001  // U1RX on PB0
#define GPIO_PCTL_PB0_T2CCP0    0x00000007  // T2CCP0 on PB0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_PCTL register for
// port C.
//
//*****************************************************************************
#define GPIO_PCTL_PC7_M         0xF0000000  // PC7 Mask
#define GPIO_PCTL_PC7_U3TX      0x10000000  // U3TX on PC7
#define GPIO_PCTL_PC7_WT1CCP1   0x70000000  // WT1CCP1 on PC7
#define GPIO_PCTL_PC6_M         0x0F000000  // PC6 Mask
#define GPIO_PCTL_PC6_U3RX      0x01000000  // U3RX on PC6
#define GPIO_PCTL_PC6_WT1CCP0   0x07000000  // WT1CCP0 on PC6
#define GPIO_PCTL_PC5_M         0x00F00000  // PC5 Mask
#define GPIO_PCTL_PC5_U4TX      0x00100000  // U4TX on PC5
#define GPIO_PCTL_PC5_U1TX      0x00200000  // U1TX on PC5
#define GPIO_PCTL_PC5_WT0CCP1   0x00700000  // WT0CCP1 on PC5
#define GPIO_PCTL_PC5_U1CTS     0x00800000  // U1CTS on PC5
#define GPIO_PCTL_PC4_M         0x000F0000  // PC4 Mask
#define GPIO_PCTL_PC4_U4RX      0x00010000  // U4RX on PC4
#define GPIO_PCTL_PC4_U1RX      0x00020000  // U1RX on PC4
#define GPIO_PCTL_PC4_WT0CCP0   0x00070000  // WT0CCP0 on PC4
#define GPIO_PCTL_PC4_U1RTS     0x00080000  // U1RTS on PC4
#define GPIO_PCTL_PC3_M         0x0000F000  // PC3 Mask
#define GPIO_PCTL_PC3_TDO       0x00001000  // TDO on PC3
#define GPIO_PCTL_PC3_T5CCP1    0x00007000  // T5CCP1 on PC3
#define GPIO_PCTL_PC2_M         0x00000F00  // PC2 Mask
#define GPIO_PCTL_PC2_TDI       0x00000100  // TDI on PC2
#define GPIO_PCTL_PC2_T5CCP0    0x00000700  // T5CCP0 on PC2
#define GPIO_PCTL_PC1_M         0x000000F0  // PC1 Mask
#define GPIO_PCTL_PC1_TMS       0x00000010  // TMS on PC1
#define GPIO_PCTL_PC1_T4CCP1    0x00000070  // T4CCP1 on PC1
#define GPIO_PCTL_PC0_M         0x0000000F  // PC0 Mask
#define GPIO_PCTL_PC0_TCK       0x00000001  // TCK on PC0
#define GPIO_PCTL_PC0_T4CCP0    0x00000007  // T4CCP0 on PC0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_PCTL register for
// port D.
//
//*****************************************************************************
#define GPIO_PCTL_PD7_M         0xF0000000  // PD7 Mask
#define GPIO_PCTL_PD7_U2TX      0x10000000  // U2TX on PD7
#define GPIO_PCTL_PD7_WT5CCP1   0x70000000  // WT5CCP1 on PD7
#define GPIO_PCTL_PD7_NMI       0x80000000  // NMI on PD7
#define GPIO_PCTL_PD6_M         0x0F000000  // PD6 Mask
#define GPIO_PCTL_PD6_U2RX      0x01000000  // U2RX on PD6
#define GPIO_PCTL_PD6_WT5CCP0   0x07000000  // WT5CCP0 on PD6
#define GPIO_PCTL_PD5_M         0x00F00000  // PD5 Mask
#define GPIO_PCTL_PD5_U6TX      0x00100000  // U6TX on PD5
#define GPIO_PCTL_PD5_WT4CCP1   0x00700000  // WT4CCP1 on PD5
#define GPIO_PCTL_PD4_M         0x000F0000  // PD4 Mask
#define GPIO_PCTL_PD4_U6RX      0x00010000  // U6RX on PD4
#define GPIO_PCTL_PD4_WT4CCP0   0x00070000  // WT4CCP0 on PD4
#define GPIO_PCTL_PD3_M         0x0000F000  // PD3 Mask
#define GPIO_PCTL_PD3_AIN4      0x00000000  // AIN4 on PD3
#define GPIO_PCTL_PD3_SSI3TX    0x00001000  // SSI3TX on PD3
#define GPIO_PCTL_PD3_SSI1TX    0x00002000  // SSI1TX on PD3
#define GPIO_PCTL_PD3_WT3CCP1   0x00007000  // WT3CCP1 on PD3
#define GPIO_PCTL_PD2_M         0x00000F00  // PD2 Mask
#define GPIO_PCTL_PD2_AIN5      0x00000000  // AIN5 on PD2
#define GPIO_PCTL_PD2_SSI3RX    0x00000100  // SSI3RX on PD2
#define GPIO_PCTL_PD2_SSI1RX    0x00000200  // SSI1RX on PD2
#define GPIO_PCTL_PD2_WT3CCP0   0x00000700  // WT3CCP0 on PD2
#define GPIO_PCTL_PD1_M         0x000000F0  // PD1 Mask
#define GPIO_PCTL_PD1_AIN6      0x00000000  // AIN6 on PD1
#define GPIO_PCTL_PD1_SSI3FSS   0x00000010  // SSI3FSS on PD1
#define GPIO_PCTL_PD1_SSI1FSS   0x00000020  // SSI1FSS on PD1
#define GPIO_PCTL_PD1_I2C3SDA   0x00000030  // I2C3SDA on PD1
#define GPIO_PCTL_PD1_WT2CCP1   0x00000070  // WT2CCP1 on PD1
#define GPIO_PCTL_PD0_M         0x0000000F  // PD0 Mask
#define GPIO_PCTL_PD0_AIN7      0x00000000  // AIN7 on PD0
#define GPIO_PCTL_PD0_SSI3CLK   0x00000001  // SSI3CLK on PD0
#define GPIO_PCTL_PD0_SSI1CLK   0x00000002  // SSI1CLK on PD0
#define GPIO_PCTL_PD0_I2C3SCL   0x00000003  // I2C3SCL on PD0
#define GPIO_PCTL_PD0_WT2CCP0   0x00000007  // WT2CCP0 on PD0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_PCTL register for
// port E.
//
//*****************************************************************************
#define GPIO_PCTL_PE5_M         0x00F00000  // PE5 Mask
#define GPIO_PCTL_PE5_AIN8      0x00000000  // AIN8 on PE5
#define GPIO_PCTL_PE5_U5TX      0x00100000  // U5TX on PE5
#define GPIO_PCTL_PE5_I2C2SDA   0x00300000  // I2C2SDA on PE5
#define GPIO_PCTL_PE5_CAN0TX    0x00800000  // CAN0TX on PE5
#define GPIO_PCTL_PE4_M         0x000F0000  // PE4 Mask
#define GPIO_PCTL_PE4_AIN9      0x00000000  // AIN9 on PE4
#define GPIO_PCTL_PE4_U5RX      0x00010000  // U5RX on PE4
#define GPIO_PCTL_PE4_I2C2SCL   0x00030000  // I2C2SCL on PE4
#define GPIO_PCTL_PE4_CAN0RX    0x00080000  // CAN0RX on PE4
#define GPIO_PCTL_PE3_M         0x0000F000  // PE3 Mask
#define GPIO_PCTL_PE3_AIN0      0x00000000  // AIN0 on PE3
#define GPIO_PCTL_PE2_M         0x00000F00  // PE2 Mask
#define GPIO_PCTL_PE2_AIN1      0x00000000  // AIN1 on PE2
#define GPIO_PCTL_PE1_M         0x000000F0  // PE1 Mask
#define GPIO_PCTL_PE1_AIN2      0x00000000  // AIN2 on PE1
#define GPIO_PCTL_PE1_U7TX      0x00000010  // U7TX on PE1
#define GPIO_PCTL_PE0_M         0x0000000F  // PE0 Mask
#define GPIO_PCTL_PE0_AIN3      0x00000000  // AIN3 on PE0
#define GPIO_PCTL_PE0_U7RX      0x00000001  // U7RX on PE0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_PCTL register for
// port F.
//
//*****************************************************************************
#define GPIO_PCTL_PF4_M         0x000F0000  // PF4 Mask
#define GPIO_PCTL_PF4_T2CCP0    0x00070000  // T2CCP0 on PF4
#define GPIO_PCTL_PF3_M         0x0000F000  // PF3 Mask
#define GPIO_PCTL_PF3_SSI1FSS   0x00002000  // SSI1FSS on PF3
#define GPIO_PCTL_PF3_CAN0TX    0x00003000  // CAN0TX on PF3
#define GPIO_PCTL_PF3_T1CCP1    0x00007000  // T1CCP1 on PF3
#define GPIO_PCTL_PF3_TRCLK     0x0000E000  // TRCLK on PF3
#define GPIO_PCTL_PF2_M         0x00000F00  // PF2 Mask
#define GPIO_PCTL_PF2_SSI1CLK   0x00000200  // SSI1CLK on PF2
#define GPIO_PCTL_PF2_T1CCP0    0x00000700  // T1CCP0 on PF2
#define GPIO_PCTL_PF2_TRD0      0x00000E00  // TRD0 on PF2
#define GPIO_PCTL_PF1_M         0x000000F0  // PF1 Mask
#define GPIO_PCTL_PF1_U1CTS     0x00000010  // U1CTS on PF1
#define GPIO_PCTL_PF1_SSI1TX    0x00000020  // SSI1TX on PF1
#define GPIO_PCTL_PF1_T0CCP1    0x00000070  // T0CCP1 on PF1
#define GPIO_PCTL_PF1_C1O       0x00000090  // C1O on PF1
#define GPIO_PCTL_PF1_TRD1      0x000000E0  // TRD1 on PF1
#define GPIO_PCTL_PF0_M         0x0000000F  // PF0 Mask
#define GPIO_PCTL_PF0_U1RTS     0x00000001  // U1RTS on PF0
#define GPIO_PCTL_PF0_SSI1RX    0x00000002  // SSI1RX on PF0
#define GPIO_PCTL_PF0_CAN0RX    0x00000003  // CAN0RX on PF0
#define GPIO_PCTL_PF0_T0CCP0    0x00000007  // T0CCP0 on PF0
#define GPIO_PCTL_PF0_NMI       0x00000008  // NMI on PF0
#define GPIO_PCTL_PF0_C0O       0x00000009  // C0O on PF0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_PCTL register for
// port G.
//
//*****************************************************************************
#define GPIO_PCTL_PG5_M         0x00F00000  // PG5 Mask
#define GPIO_PCTL_PG5_U2TX      0x00100000  // U2TX on PG5
#define GPIO_PCTL_PG5_I2C1SDA   0x00300000  // I2C1SDA on PG5
#define GPIO_PCTL_PG5_WT0CCP1   0x00700000  // WT0CCP1 on PG5
#define GPIO_PCTL_PG4_M         0x000F0000  // PG4 Mask
#define GPIO_PCTL_PG4_U2RX      0x00010000  // U2RX on PG4
#define GPIO_PCTL_PG4_I2C1SCL   0x00030000  // I2C1SCL on PG4
#define GPIO_PCTL_PG4_WT0CCP0   0x00070000  // WT0CCP0 on PG4
#define GPIO_PCTL_PG3_M         0x0000F000  // PG3 Mask
#define GPIO_PCTL_PG3_I2C4SDA   0x00003000  // I2C4SDA on PG3
#define GPIO_PCTL_PG3_T5CCP1    0x00007000  // T5CCP1 on PG3
#define GPIO_PCTL_PG2_M         0x00000F00  // PG2 Mask
#define GPIO_PCTL_PG2_I2C4SCL   0x00000300  // I2C4SCL on PG2
#define GPIO_PCTL_PG2_T5CCP0    0x00000700  // T5CCP0 on PG2
#define GPIO_PCTL_PG1_M         0x000000F0  // PG1 Mask
#define GPIO_PCTL_PG1_I2C3SDA   0x00000030  // I2C3SDA on PG1
#define GPIO_PCTL_PG1_T4CCP1    0x00000070  // T4CCP1 on PG1
#define GPIO_PCTL_PG0_M         0x0000000F  // PG0 Mask
#define GPIO_PCTL_PG0_I2C3SCL   0x00000003  // I2C3SCL on PG0
#define GPIO_PCTL_PG0_T4CCP0    0x00000007  // T4CCP0 on PG0

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR0 register.
//
//*****************************************************************************
#define SSI_CR0_SCR_M           0x0000FF00  // SSI Serial Clock Rate
#define SSI_CR0_SPH             0x00000080  // SSI Serial Clock Phase
#define SSI_CR0_SPO             0x00000040  // SSI Serial Clock Polarity
#define SSI_CR0_FRF_M           0x00000030  // SSI Frame Format Select
#define SSI_CR0_FRF_MOTO        0x00000000  // Freescale SPI Frame Format
#define SSI_CR0_FRF_TI          0x00000010  // Synchronous Serial Frame Format
#define SSI_CR0_FRF_NMW         0x00000020  // MICROWIRE Frame Format
#define SSI_CR0_DSS_M           0x0000000F  // SSI Data Size Select
#define SSI_CR0_DSS_4           0x00000003  // 4-bit data
#define SSI_CR0_DSS_5           0x00000004  // 5-bit data
#define SSI_CR0_DSS_6           0x00000005  // 6-bit data
#define SSI_CR0_DSS_7           0x00000006  // 7-bit data
#define SSI_CR0_DSS_8           0x00000007  // 8-bit data
#define SSI_CR0_DSS_9           0x00000008  // 9-bit data
#define SSI_CR0_DSS_10          0x00000009  // 10-bit data
#define SSI_CR0_DSS_11          0x0000000A  // 11-bit data
#define SSI_CR0_DSS_12          0x0000000B  // 12-bit data
#define SSI_CR0_DSS_13          0x0000000C  // 13-bit data
#define SSI_CR0_DSS_14          0x0000000D  // 14-bit data
#define SSI_CR0_DSS_15          0x0000000E  // 15-bit data
#define SSI_CR0_DSS_16          0x0000000F  // 16-bit data
#define SSI_CR0_SCR_S           8

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CR1 register.
//
//*****************************************************************************
#define SSI_CR1_EOT             0x00000010  // End of Transmission
#define SSI_CR1_MS              0x00000004  // SSI Master/Slave Select
#define SSI_CR1_SSE             0x00000002  // SSI Synchronous Serial Port
                                            // Enable
#define SSI_CR1_LBM             0x00000001  // SSI Loopback Mode

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_DR register.
//
//*****************************************************************************
#define SSI_DR_DATA_M           0x0000FFFF  // SSI Receive/Transmit Data
#define SSI_DR_DATA_S           0

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_SR register.
//
//*****************************************************************************
#define SSI_SR_BSY              0x00000010  // SSI Busy Bit
#define SSI_SR_RFF              0x00000008  // SSI Receive FIFO Full
#define SSI_SR_RNE              0x00000004  // SSI Receive FIFO Not Empty
#define SSI_SR_TNF              0x00000002  // SSI Transmit FIFO Not Full
#define SSI_SR_TFE              0x00000001  // SSI Transmit FIFO Empty

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CPSR register.
//
//*****************************************************************************
#define SSI_CPSR_CPSDVSR_M      0x000000FF  // SSI Clock Prescale Divisor
#define SSI_CPSR_CPSDVSR_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_IM register.
//
//*****************************************************************************
#define SSI_IM_TXIM             0x00000008  // SSI Transmit FIFO Interrupt Mask
#define SSI_IM_RXIM             0x00000004  // SSI Receive FIFO Interrupt Mask
#define SSI_IM_RTIM             0x00000002  // SSI Receive Time-Out Interrupt
                                            // Mask
#define SSI_IM_RORIM            0x00000001  // SSI Receive Overrun Interrupt
                                            // Mask

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_RIS register.
//
//*****************************************************************************
#define SSI_RIS_TXRIS           0x00000008  // SSI Transmit FIFO Raw Interrupt
                                            // Status
#define SSI_RIS_RXRIS           0x00000004  // SSI Receive FIFO Raw Interrupt
                                            // Status
#define SSI_RIS_RTRIS           0x00000002  // SSI Receive Time-Out Raw
                                            // Interrupt Status
#define SSI_RIS_RORRIS          0x00000001  // SSI Receive Overrun Raw
                                            // Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_MIS register.
//
//*****************************************************************************
#define SSI_MIS_TXMIS           0x00000008  // SSI Transmit FIFO Masked
                                            // Interrupt Status
#define SSI_MIS_RXMIS           0x00000004  // SSI Receive FIFO Masked
                                            // Interrupt Status
#define SSI_MIS_RTMIS           0x00000002  // SSI Receive Time-Out Masked
                                            // Interrupt Status
#define SSI_MIS_RORMIS          0x00000001  // SSI Receive Overrun Masked
                                            // Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_ICR register.
//
//*****************************************************************************
#define SSI_ICR_RTIC            0x00000002  // SSI Receive Time-Out Interrupt
                                            // Clear
#define SSI_ICR_RORIC           0x00000001  // SSI Receive Overrun Interrupt
                                            // Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_DMACTL register.
//
//*****************************************************************************
#define SSI_DMACTL_TXDMAE       0x00000002  // Transmit DMA Enable
#define SSI_DMACTL_RXDMAE       0x00000001  // Receive DMA Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the SSI_O_CC register.
//
//*****************************************************************************
#define SSI_CC_CS_M             0x0000000F  // SSI Baud Clock Source
#define SSI_CC_CS_SYSPLL        0x00000000  // System clock (based on clock
                                            // source and divisor factor)
#define SSI_CC_CS_PIOSC         0x00000005  // PIOSC

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_DR register.
//
//*****************************************************************************
#define UART_DR_OE              0x00000800  // UART Overrun Error
#define UART_DR_BE              0x00000400  // UART Break Error
#define UART_DR_PE              0x00000200  // UART Parity Error
#define UART_DR_FE              0x00000100  // UART Framing Error
#define UART_DR_DATA_M          0x000000FF  // Data Transmitted or Received
#define UART_DR_DATA_S          0

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_RSR register.
//
//*****************************************************************************
#define UART_RSR_OE             0x00000008  // UART Overrun Error
#define UART_RSR_BE             0x00000004  // UART Break Error
#define UART_RSR_PE             0x00000002  // UART Parity Error
#define UART_RSR_FE             0x00000001  // UART Framing Error

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_ECR register.
//
//*****************************************************************************
#define UART_ECR_DATA_M         0x000000FF  // Error Clear
#define UART_ECR_DATA_S         0

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_FR register.
//
//*****************************************************************************
#define UART_FR_TXFE            0x00000080  // UART Transmit FIFO Empty
#define UART_FR_RXFF            0x00000040  // UART Receive FIFO Full
#define UART_FR_TXFF            0x00000020  // UART Transmit FIFO Full
#define UART_FR_RXFE            0x00000010  // UART Receive FIFO Empty
#define UART_FR_BUSY            0x00000008  // UART Busy
#define UART_FR_CTS             0x00000001  // Clear To Send

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_ILPR register.
//
//*****************************************************************************
#define UART_ILPR_ILPDVSR_M     0x000000FF  // IrDA Low-Power Divisor
#define UART_ILPR_ILPDVSR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_IBRD register.
//
//*****************************************************************************
#define UART_IBRD_DIVINT_M      0x0000FFFF  // Integer Baud-Rate Divisor
#define UART_IBRD_DIVINT_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_FBRD register.
//
//*****************************************************************************
#define UART_FBRD_DIVFRAC_M     0x0000003F  // Fractional Baud-Rate Divisor
#define UART_FBRD_DIVFRAC_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_LCRH register.
//
//*****************************************************************************
#define UART_LCRH_SPS           0x00000080  // UART Stick Parity Select
#define UART_LCRH_WLEN_M        0x00000060  // UART Word Length
#define UART_LCRH_WLEN_5        0x00000000  // 5 bits (default)
#define UART_LCRH_WLEN_6        0x00000020  // 6 bits
#define UART_LCRH_WLEN_7        0x00000040  // 7 bits
#define UART_LCRH_WLEN_8        0x00000060  // 8 bits
#define UART_LCRH_FEN           0x00000010  // UART Enable FIFOs
#define UART_LCRH_STP2          0x00000008  // UART Two Stop Bits Select
#define UART_LCRH_EPS           0x00000004  // UART Even Parity Select
#define UART_LCRH_PEN           0x00000002  // UART Parity Enable
#define UART_LCRH_BRK           0x00000001  // UART Send Break

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_CTL register.
//
//*****************************************************************************
#define UART_CTL_CTSEN          0x00008000  // Enable Clear To Send
#define UART_CTL_RTSEN          0x00004000  // Enable Request to Send
#define UART_CTL_RTS            0x00000800  // Request to Send
#define UART_CTL_RXE            0x00000200  // UART Receive Enable
#define UART_CTL_TXE            0x00000100  // UART Transmit Enable
#define UART_CTL_LBE            0x00000080  // UART Loop Back Enable
#define UART_CTL_HSE            0x00000020  // High-Speed Enable
#define UART_CTL_EOT            0x00000010  // End of Transmission
#define UART_CTL_SMART          0x00000008  // ISO 7816 Smart Card Support
#define UART_CTL_SIRLP          0x00000004  // UART SIR Low-Power Mode
#define UART_CTL_SIREN          0x00000002  // UART SIR Enable
#define UART_CTL_UARTEN         0x00000001  // UART Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_IFLS register.
//
//*****************************************************************************
#define UART_IFLS_RX_M          0x00000038  // UART Receive Interrupt FIFO
                                            // Level Select
#define UART_IFLS_RX1_8         0x00000000  // RX FIFO >= 1/8 full
#define UART_IFLS_RX2_8         0x00000008  // RX FIFO >= 1/4 full
#define UART_IFLS_RX4_8         0x00000010  // RX FIFO >= 1/2 full (default)
#define UART_IFLS_RX6_8         0x00000018  // RX FIFO >= 3/4 full
#define UART_IFLS_RX7_8         0x00000020  // RX FIFO >= 7/8 full
#define UART_IFLS_TX_M          0x00000007  // UART Transmit Interrupt FIFO
                                            // Level Select
#define UART_IFLS_TX1_8         0x00000000  // TX FIFO <= 1/8 full
#define UART_IFLS_TX2_8         0x00000001  // TX FIFO <= 1/4 full
#define UART_IFLS_TX4_8         0x00000002  // TX FIFO <= 1/2 full (default)
#define UART_IFLS_TX6_8         0x00000003  // TX FIFO <= 3/4 full
#define UART_IFLS_TX7_8         0x00000004  // TX FIFO <= 7/8 full

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_IM register.
//
//*****************************************************************************
#define UART_IM_9BITIM          0x00001000  // 9-Bit Mode Interrupt Mask
#define UART_IM_OEIM            0x00000400  // UART Overrun Error Interrupt
                                            // Mask
#define UART_IM_BEIM            0x00000200  // UART Break Error Interrupt Mask
#define UART_IM_PEIM            0x00000100  // UART Parity Error Interrupt Mask
#define UART_IM_FEIM            0x00000080  // UART Framing Error Interrupt
                                            // Mask
#define UART_IM_RTIM            0x00000040  // UART Receive Time-Out Interrupt
                                            // Mask
#define UART_IM_TXIM            0x00000020  // UART Transmit Interrupt Mask
#define UART_IM_RXIM            0x00000010  // UART Receive Interrupt Mask
#define UART_IM_CTSMIM          0x00000002  // UART Clear to Send Modem
                                            // Interrupt Mask

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_RIS register.
//
//*****************************************************************************
#define UART_RIS_9BITRIS        0x00001000  // 9-Bit Mode Raw Interrupt Status
#define UART_RIS_OERIS          0x00000400  // UART Overrun Error Raw Interrupt
                                            // Status
#define UART_RIS_BERIS          0x00000200  // UART Break Error Raw Interrupt
                                            // Status
#define UART_RIS_PERIS          0x00000100  // UART Parity Error Raw Interrupt
                                            // Status
#define UART_RIS_FERIS          0x00000080  // UART Framing Error Raw Interrupt
                                            // Status
#define UART_RIS_RTRIS          0x00000040  // UART Receive Time-Out Raw
                                            // Interrupt Status
#define UART_RIS_TXRIS          0x00000020  // UART Transmit Raw Interrupt
                                            // Status
#define UART_RIS_RXRIS          0x00000010  // UART Receive Raw Interrupt
                                            // Status
#define UART_RIS_CTSRIS         0x00000002  // UART Clear to Send Modem Raw
                                            // Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_MIS register.
//
//*****************************************************************************
#define UART_MIS_9BITMIS        0x00001000  // 9-Bit Mode Masked Interrupt
                                            // Status
#define UART_MIS_OEMIS          0x00000400  // UART Overrun Error Masked
                                            // Interrupt Status
#define UART_MIS_BEMIS          0x00000200  // UART Break Error Masked
                                            // Interrupt Status
#define UART_MIS_PEMIS          0x00000100  // UART Parity Error Masked
                                            // Interrupt Status
#define UART_MIS_FEMIS          0x00000080  // UART Framing Error Masked
                                            // Interrupt Status
#define UART_MIS_RTMIS          0x00000040  // UART Receive Time-Out Masked
                                            // Interrupt Status
#define UART_MIS_TXMIS          0x00000020  // UART Transmit Masked Interrupt
                                            // Status
#define UART_MIS_RXMIS          0x00000010  // UART Receive Masked Interrupt
                                            // Status
#define UART_MIS_CTSMIS         0x00000002  // UART Clear to Send Modem Masked
                                            // Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_ICR register.
//
//*****************************************************************************
#define UART_ICR_9BITIC         0x00001000  // 9-Bit Mode Interrupt Clear
#define UART_ICR_OEIC           0x00000400  // Overrun Error Interrupt Clear
#define UART_ICR_BEIC           0x00000200  // Break Error Interrupt Clear
#define UART_ICR_PEIC           0x00000100  // Parity Error Interrupt Clear
#define UART_ICR_FEIC           0x00000080  // Framing Error Interrupt Clear
#define UART_ICR_RTIC           0x00000040  // Receive Time-Out Interrupt Clear
#define UART_ICR_TXIC           0x00000020  // Transmit Interrupt Clear
#define UART_ICR_RXIC           0x00000010  // Receive Interrupt Clear
#define UART_ICR_CTSMIC         0x00000002  // UART Clear to Send Modem
                                            // Interrupt Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_DMACTL register.
//
//*****************************************************************************
#define UART_DMACTL_DMAERR      0x00000004  // DMA on Error
#define UART_DMACTL_TXDMAE      0x00000002  // Transmit DMA Enable
#define UART_DMACTL_RXDMAE      0x00000001  // Receive DMA Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_9BITADDR
// register.
//
//*****************************************************************************
#define UART_9BITADDR_9BITEN    0x00008000  // Enable 9-Bit Mode
#define UART_9BITADDR_ADDR_M    0x000000FF  // Self Address for 9-Bit Mode
#define UART_9BITADDR_ADDR_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_9BITAMASK
// register.
//
//*****************************************************************************
#define UART_9BITAMASK_MASK_M   0x000000FF  // Self Address Mask for 9-Bit Mode
#define UART_9BITAMASK_MASK_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_PP register.
//
//*****************************************************************************
#define UART_PP_NB              0x00000002  // 9-Bit Support
#define UART_PP_SC              0x00000001  // Smart Card Support

//*****************************************************************************
//
// The following are defines for the bit fields in the UART_O_CC register.
//
//*****************************************************************************
#define UART_CC_CS_M            0x0000000F  // UART Baud Clock Source
#define UART_CC_CS_SYSCLK       0x00000000  // System clock (based on clock
                                            // source and divisor factor)
#define UART_CC_CS_PIOSC        0x00000005  // PIOSC

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MSA register.
//
//*****************************************************************************
#define I2C_MSA_SA_M            0x000000FE  // I2C Slave Address
#define I2C_MSA_RS              0x00000001  // Receive not send
#define I2C_MSA_SA_S            1

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MCS register.
//
//*****************************************************************************
#define I2C_MCS_CLKTO           0x00000080  // Clock Timeout Error
#define I2C_MCS_BUSBSY          0x00000040  // Bus Busy
#define I2C_MCS_IDLE            0x00000020  // I2C Idle
#define I2C_MCS_ARBLST          0x00000010  // Arbitration Lost
#define I2C_MCS_HS              0x00000010  // High-Speed Enable
#define I2C_MCS_ACK             0x00000008  // Data Acknowledge Enable
#define I2C_MCS_DATACK          0x00000008  // Acknowledge Data
#define I2C_MCS_ADRACK          0x00000004  // Acknowledge Address
#define I2C_MCS_STOP            0x00000004  // Generate STOP
#define I2C_MCS_ERROR           0x00000002  // Error
#define I2C_MCS_START           0x00000002  // Generate START
#define I2C_MCS_RUN             0x00000001  // I2C Master Enable
#define I2C_MCS_BUSY            0x00000001  // I2C Busy

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MDR register.
//
//*****************************************************************************
#define I2C_MDR_DATA_M          0x000000FF  // This byte contains the data
                                            // transferred during a transaction
#define I2C_MDR_DATA_S          0

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MTPR register.
//
//*****************************************************************************
#define I2C_MTPR_HS             0x00000080  // High-Speed Enable
#define I2C_MTPR_TPR_M          0x0000007F  // Timer Period
#define I2C_MTPR_TPR_S          0

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MIMR register.
//
//*****************************************************************************
#define I2C_MIMR_CLKIM          0x00000002  // Clock Timeout Interrupt Mask
#define I2C_MIMR_IM             0x00000001  // Master Interrupt Mask

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MRIS register.
//
//*****************************************************************************
#define I2C_MRIS_CLKRIS         0x00000002  // Clock Timeout Raw Interrupt
                                            // Status
#define I2C_MRIS_RIS            0x00000001  // Master Raw Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MMIS register.
//
//*****************************************************************************
#define I2C_MMIS_CLKMIS         0x00000002  // Clock Timeout Masked Interrupt
                                            // Status
#define I2C_MMIS_MIS            0x00000001  // Masked Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MICR register.
//
//*****************************************************************************
#define I2C_MICR_CLKIC          0x00000002  // Clock Timeout Interrupt Clear
#define I2C_MICR_IC             0x00000001  // Master Interrupt Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MCR register.
//
//*****************************************************************************
#define I2C_MCR_GFE             0x00000040  // I2C Glitch Filter Enable
#define I2C_MCR_SFE             0x00000020  // I2C Slave Function Enable
#define I2C_MCR_MFE             0x00000010  // I2C Master Function Enable
#define I2C_MCR_LPBK            0x00000001  // I2C Loopback

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MCLKOCNT register.
//
//*****************************************************************************
#define I2C_MCLKOCNT_CNTL_M     0x000000FF  // I2C Master Count
#define I2C_MCLKOCNT_CNTL_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MBMON register.
//
//*****************************************************************************
#define I2C_MBMON_SDA           0x00000002  // I2C SDA Status
#define I2C_MBMON_SCL           0x00000001  // I2C SCL Status

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_MCR2 register.
//
//*****************************************************************************
#define I2C_MCR2_GFPW_M         0x00000070  // I2C Glitch Filter Pulse Width
#define I2C_MCR2_GFPW_BYPASS    0x00000000  // Bypass
#define I2C_MCR2_GFPW_1         0x00000010  // 1 clock
#define I2C_MCR2_GFPW_2         0x00000020  // 2 clocks
#define I2C_MCR2_GFPW_3         0x00000030  // 3 clocks
#define I2C_MCR2_GFPW_4         0x00000040  // 4 clocks
#define I2C_MCR2_GFPW_8         0x00000050  // 8 clocks
#define I2C_MCR2_GFPW_16        0x00000060  // 16 clocks
#define I2C_MCR2_GFPW_31        0x00000070  // 31 clocks

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SOAR register.
//
//*****************************************************************************
#define I2C_SOAR_OAR_M          0x0000007F  // I2C Slave Own Address
#define I2C_SOAR_OAR_S          0

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SCSR register.
//
//*****************************************************************************
#define I2C_SCSR_OAR2SEL        0x00000008  // OAR2 Address Matched
#define I2C_SCSR_FBR            0x00000004  // First Byte Received
#define I2C_SCSR_TREQ           0x00000002  // Transmit Request
#define I2C_SCSR_DA             0x00000001  // Device Active
#define I2C_SCSR_RREQ           0x00000001  // Receive Request

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SDR register.
//
//*****************************************************************************
#define I2C_SDR_DATA_M          0x000000FF  // Data for Transfer
#define I2C_SDR_DATA_S          0

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SIMR register.
//
//*****************************************************************************
#define I2C_SIMR_STOPIM         0x00000004  // Stop Condition Interrupt Mask
#define I2C_SIMR_STARTIM        0x00000002  // Start Condition Interrupt Mask
#define I2C_SIMR_DATAIM         0x00000001  // Data Interrupt Mask

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SRIS register.
//
//*****************************************************************************
#define I2C_SRIS_STOPRIS        0x00000004  // Stop Condition Raw Interrupt
                                            // Status
#define I2C_SRIS_STARTRIS       0x00000002  // Start Condition Raw Interrupt
                                            // Status
#define I2C_SRIS_DATARIS        0x00000001  // Data Raw Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SMIS register.
//
//*****************************************************************************
#define I2C_SMIS_STOPMIS        0x00000004  // Stop Condition Masked Interrupt
                                            // Status
#define I2C_SMIS_STARTMIS       0x00000002  // Start Condition Masked Interrupt
                                            // Status
#define I2C_SMIS_DATAMIS        0x00000001  // Data Masked Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SICR register.
//
//*****************************************************************************
#define I2C_SICR_STOPIC         0x00000004  // Stop Condition Interrupt Clear
#define I2C_SICR_STARTIC        0x00000002  // Start Condition Interrupt Clear
#define I2C_SICR_DATAIC         0x00000001  // Data Interrupt Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SOAR2 register.
//
//*****************************************************************************
#define I2C_SOAR2_OAR2EN        0x00000080  // I2C Slave Own Address 2 Enable
#define I2C_SOAR2_OAR2_M        0x0000007F  // I2C Slave Own Address 2
#define I2C_SOAR2_OAR2_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_SACKCTL register.
//
//*****************************************************************************
#define I2C_SACKCTL_ACKOVAL     0x00000002  // I2C Slave ACK Override Value
#define I2C_SACKCTL_ACKOEN      0x00000001  // I2C Slave ACK Override Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_PP register.
//
//*****************************************************************************
#define I2C_PP_HS               0x00000001  // High-Speed Capable

//*****************************************************************************
//
// The following are defines for the bit fields in the I2C_O_PC register.
//
//*****************************************************************************
#define I2C_PC_HS               0x00000001  // High-Speed Capable

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_CFG register.
//
//*****************************************************************************
#define TIMER_CFG_M             0x00000007  // GPTM Configuration
#define TIMER_CFG_32_BIT_TIMER  0x00000000  // For a 16/32-bit timer, this
                                            // value selects the 32-bit timer
                                            // configuration
#define TIMER_CFG_32_BIT_RTC    0x00000001  // For a 16/32-bit timer, this
                                            // value selects the 32-bit
                                            // real-time clock (RTC) counter
                                            // configuration
#define TIMER_CFG_16_BIT        0x00000004  // For a 16/32-bit timer, this
                                            // value selects the 16-bit timer
                                            // configuration

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAMR register.
//
//*****************************************************************************
#define TIMER_TAMR_TAPLO        0x00000800  // GPTM Timer A PWM Legacy
                                            // Operation
#define TIMER_TAMR_TAMRSU       0x00000400  // GPTM Timer A Match Register
                                            // Update
#define TIMER_TAMR_TAPWMIE      0x00000200  // GPTM Timer A PWM Interrupt
                                            // Enable
#define TIMER_TAMR_TAILD        0x00000100  // GPTM Timer A Interval Load Write
#define TIMER_TAMR_TASNAPS      0x00000080  // GPTM Timer A Snap-Shot Mode
#define TIMER_TAMR_TAWOT        0x00000040  // GPTM Timer A Wait-on-Trigger
#define TIMER_TAMR_TAMIE        0x00000020  // GPTM Timer A Match Interrupt
                                            // Enable
#define TIMER_TAMR_TACDIR       0x00000010  // GPTM Timer A Count Direction
#define TIMER_TAMR_TAAMS        0x00000008  // GPTM Timer A Alternate Mode
                                            // Select
#define TIMER_TAMR_TACMR        0x00000004  // GPTM Timer A Capture Mode
#define TIMER_TAMR_TAMR_M       0x00000003  // GPTM Timer A Mode
#define TIMER_TAMR_TAMR_1_SHOT  0x00000001  // One-Shot Timer mode
#define TIMER_TAMR_TAMR_PERIOD  0x00000002  // Periodic Timer mode
#define TIMER_TAMR_TAMR_CAP     0x00000003  // Capture mode

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBMR register.
//
//*****************************************************************************
#define TIMER_TBMR_TBPLO        0x00000800  // GPTM Timer B PWM Legacy
                                            // Operation
#define TIMER_TBMR_TBMRSU       0x00000400  // GPTM Timer B Match Register
                                            // Update
#define TIMER_TBMR_TBPWMIE      0x00000200  // GPTM Timer B PWM Interrupt
                                            // Enable
#define TIMER_TBMR_TBILD        0x00000100  // GPTM Timer B Interval Load Write
#define TIMER_TBMR_TBSNAPS      0x00000080  // GPTM Timer B Snap-Shot Mode
#define TIMER_TBMR_TBWOT        0x00000040  // GPTM Timer B Wait-on-Trigger
#define TIMER_TBMR_TBMIE        0x00000020  // GPTM Timer B Match Interrupt
                                            // Enable
#define TIMER_TBMR_TBCDIR       0x00000010  // GPTM Timer B Count Direction
#define TIMER_TBMR_TBAMS        0x00000008  // GPTM Timer B Alternate Mode
                                            // Select
#define TIMER_TBMR_TBCMR        0x00000004  // GPTM Timer B Capture Mode
#define TIMER_TBMR_TBMR_M       0x00000003  // GPTM Timer B Mode
#define TIMER_TBMR_TBMR_1_SHOT  0x00000001  // One-Shot Timer mode
#define TIMER_TBMR_TBMR_PERIOD  0x00000002  // Periodic Timer mode
#define TIMER_TBMR_TBMR_CAP     0x00000003  // Capture mode

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_CTL register.
//
//*****************************************************************************
#define TIMER_CTL_TBPWML        0x00004000  // GPTM Timer B PWM Output Level
#define TIMER_CTL_TBOTE         0x00002000  // GPTM Timer B Output Trigger
                                            // Enable
#define TIMER_CTL_TBEVENT_M     0x00000C00  // GPTM Timer B Event Mode
#define TIMER_CTL_TBEVENT_POS   0x00000000  // Positive edge
#define TIMER_CTL_TBEVENT_NEG   0x00000400  // Negative edge
#define TIMER_CTL_TBEVENT_BOTH  0x00000C00  // Both edges
#define TIMER_CTL_TBSTALL       0x00000200  // GPTM Timer B Stall Enable
#define TIMER_CTL_TBEN          0x00000100  // GPTM Timer B Enable
#define TIMER_CTL_TAPWML        0x00000040  // GPTM Timer A PWM Output Level
#define TIMER_CTL_TAOTE         0x00000020  // GPTM Timer A Output Trigger
                                            // Enable
#define TIMER_CTL_RTCEN         0x00000010  // GPTM RTC Stall Enable
#define TIMER_CTL_TAEVENT_M     0x0000000C  // GPTM Timer A Event Mode
#define TIMER_CTL_TAEVENT_POS   0x00000000  // Positive edge
#define TIMER_CTL_TAEVENT_NEG   0x00000004  // Negative edge
#define TIMER_CTL_TAEVENT_BOTH  0x0000000C  // Both edges
#define TIMER_CTL_TASTALL       0x00000002  // GPTM Timer A Stall Enable
#define TIMER_CTL_TAEN          0x00000001  // GPTM Timer A Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_SYNC register.
//
//*****************************************************************************
#define TIMER_SYNC_SYNCWT5_M    0x00C00000  // Synchronize GPTM 32/64-Bit Timer
                                            // 5
#define TIMER_SYNC_SYNCWT5_NONE 0x00000000  // GPTM 32/64-Bit Timer 5 is not
                                            // affected
#define TIMER_SYNC_SYNCWT5_TA   0x00400000  // A timeout event for Timer A of
                                            // GPTM 32/64-Bit Timer 5 is
                                            // triggered
#define TIMER_SYNC_SYNCWT5_TB   0x00800000  // A timeout event for Timer B of
                                            // GPTM 32/64-Bit Timer 5 is
                                            // triggered
#define TIMER_SYNC_SYNCWT5_TATB 0x00C00000  // A timeout event for both Timer A
                                            // and Timer B of GPTM 32/64-Bit
                                            // Timer 5 is triggered
#define TIMER_SYNC_SYNCWT4_M    0x00300000  // Synchronize GPTM 32/64-Bit Timer
                                            // 4
#define TIMER_SYNC_SYNCWT4_NONE 0x00000000  // GPTM 32/64-Bit Timer 4 is not
                                            // affected
#define TIMER_SYNC_SYNCWT4_TA   0x00100000  // A timeout event for Timer A of
                                            // GPTM 32/64-Bit Timer 4 is
                                            // triggered
#define TIMER_SYNC_SYNCWT4_TB   0x00200000  // A timeout event for Timer B of
                                            // GPTM 32/64-Bit Timer 4 is
                                            // triggered
#define TIMER_SYNC_SYNCWT4_TATB 0x00300000  // A timeout event for both Timer A
                                            // and Timer B of GPTM 32/64-Bit
                                            // Timer 4 is triggered
#define TIMER_SYNC_SYNCWT3_M    0x000C0000  // Synchronize GPTM 32/64-Bit Timer
                                            // 3
#define TIMER_SYNC_SYNCWT3_NONE 0x00000000  // GPTM 32/64-Bit Timer 3 is not
                                            // affected
#define TIMER_SYNC_SYNCWT3_TA   0x00040000  // A timeout event for Timer A of
                                            // GPTM 32/64-Bit Timer 3 is
                                            // triggered
#define TIMER_SYNC_SYNCWT3_TB   0x00080000  // A timeout event for Timer B of
                                            // GPTM 32/64-Bit Timer 3 is
                                            // triggered
#define TIMER_SYNC_SYNCWT3_TATB 0x000C0000  // A timeout event for both Timer A
                                            // and Timer B of GPTM 32/64-Bit
                                            // Timer 3 is triggered
#define TIMER_SYNC_SYNCWT2_M    0x00030000  // Synchronize GPTM 32/64-Bit Timer
                                            // 2
#define TIMER_SYNC_SYNCWT2_NONE 0x00000000  // GPTM 32/64-Bit Timer 2 is not
                                            // affected
#define TIMER_SYNC_SYNCWT2_TA   0x00010000  // A timeout event for Timer A of
                                            // GPTM 32/64-Bit Timer 2 is
                                            // triggered
#define TIMER_SYNC_SYNCWT2_TB   0x00020000  // A timeout event for Timer B of
                                            // GPTM 32/64-Bit Timer 2 is
                                            // triggered
#define TIMER_SYNC_SYNCWT2_TATB 0x00030000  // A timeout event for both Timer A
                                            // and Timer B of GPTM 32/64-Bit
                                            // Timer 2 is triggered
#define TIMER_SYNC_SYNCWT1_M    0x0000C000  // Synchronize GPTM 32/64-Bit Timer
                                            // 1
#define TIMER_SYNC_SYNCWT1_NONE 0x00000000  // GPTM 32/64-Bit Timer 1 is not
                                            // affected
#define TIMER_SYNC_SYNCWT1_TA   0x00004000  // A timeout event for Timer A of
                                            // GPTM 32/64-Bit Timer 1 is
                                            // triggered
#define TIMER_SYNC_SYNCWT1_TB   0x00008000  // A timeout event for Timer B of
                                            // GPTM 32/64-Bit Timer 1 is
                                            // triggered
#define TIMER_SYNC_SYNCWT1_TATB 0x0000C000  // A timeout event for both Timer A
                                            // and Timer B of GPTM 32/64-Bit
                                            // Timer 1 is triggered
#define TIMER_SYNC_SYNCWT0_M    0x00003000  // Synchronize GPTM 32/64-Bit Timer
                                            // 0
#define TIMER_SYNC_SYNCWT0_NONE 0x00000000  // GPTM 32/64-Bit Timer 0 is not
                                            // affected
#define TIMER_SYNC_SYNCWT0_TA   0x00001000  // A timeout event for Timer A of
                                            // GPTM 32/64-Bit Timer 0 is
                                            // triggered
#define TIMER_SYNC_SYNCWT0_TB   0x00002000  // A timeout event for Timer B of
                                            // GPTM 32/64-Bit Timer 0 is
                                            // triggered
#define TIMER_SYNC_SYNCWT0_TATB 0x00003000  // A timeout event for both Timer A
                                            // and Timer B of GPTM 32/64-Bit
                                            // Timer 0 is triggered
#define TIMER_SYNC_SYNCT5_M     0x00000C00  // Synchronize GPTM Timer 5
#define TIMER_SYNC_SYNCT5_NONE  0x00000000  // GPTM5 is not affected
#define TIMER_SYNC_SYNCT5_TA    0x00000400  // A timeout event for Timer A of
                                            // GPTM5 is triggered
#define TIMER_SYNC_SYNCT5_TB    0x00000800  // A timeout event for Timer B of
                                            // GPTM5 is triggered
#define TIMER_SYNC_SYNCT5_TATB  0x00000C00  // A timeout event for both Timer A
                                            // and Timer B of GPTM5 is
                                            // triggered
#define TIMER_SYNC_SYNCT4_M     0x00000300  // Synchronize GPTM Timer 4
#define TIMER_SYNC_SYNCT4_NONE  0x00000000  // GPTM4 is not affected
#define TIMER_SYNC_SYNCT4_TA    0x00000100  // A timeout event for Timer A of
                                            // GPTM4 is triggered
#define TIMER_SYNC_SYNCT4_TB    0x00000200  // A timeout event for Timer B of
                                            // GPTM4 is triggered
#define TIMER_SYNC_SYNCT4_TATB  0x00000300  // A timeout event for both Timer A
                                            // and Timer B of GPTM4 is
                                            // triggered
#define TIMER_SYNC_SYNCT3_M     0x000000C0  // Synchronize GPTM Timer 3
#define TIMER_SYNC_SYNCT3_NONE  0x00000000  // GPTM3 is not affected
#define TIMER_SYNC_SYNCT3_TA    0x00000040  // A timeout event for Timer A of
                                            // GPTM3 is triggered
#define TIMER_SYNC_SYNCT3_TB    0x00000080  // A timeout event for Timer B of
                                            // GPTM3 is triggered
#define TIMER_SYNC_SYNCT3_TATB  0x000000C0  // A timeout event for both Timer A
                                            // and Timer B of GPTM3 is
                                            // triggered
#define TIMER_SYNC_SYNCT2_M     0x00000030  // Synchronize GPTM Timer 2
#define TIMER_SYNC_SYNCT2_NONE  0x00000000  // GPTM2 is not affected
#define TIMER_SYNC_SYNCT2_TA    0x00000010  // A timeout event for Timer A of
                                            // GPTM2 is triggered
#define TIMER_SYNC_SYNCT2_TB    0x00000020  // A timeout event for Timer B of
                                            // GPTM2 is triggered
#define TIMER_SYNC_SYNCT2_TATB  0x00000030  // A timeout event for both Timer A
                                            // and Timer B of GPTM2 is
                                            // triggered
#define TIMER_SYNC_SYNCT1_M     0x0000000C  // Synchronize GPTM Timer 1
#define TIMER_SYNC_SYNCT1_NONE  0x00000000  // GPTM1 is not affected
#define TIMER_SYNC_SYNCT1_TA    0x00000004  // A timeout event for Timer A of
                                            // GPTM1 is triggered
#define TIMER_SYNC_SYNCT1_TB    0x00000008  // A timeout event for Timer B of
                                            // GPTM1 is triggered
#define TIMER_SYNC_SYNCT1_TATB  0x0000000C  // A timeout event for both Timer A
                                            // and Timer B of GPTM1 is
                                            // triggered
#define TIMER_SYNC_SYNCT0_M     0x00000003  // Synchronize GPTM Timer 0
#define TIMER_SYNC_SYNCT0_NONE  0x00000000  // GPTM0 is not affected
#define TIMER_SYNC_SYNCT0_TA    0x00000001  // A timeout event for Timer A of
                                            // GPTM0 is triggered
#define TIMER_SYNC_SYNCT0_TB    0x00000002  // A timeout event for Timer B of
                                            // GPTM0 is triggered
#define TIMER_SYNC_SYNCT0_TATB  0x00000003  // A timeout event for both Timer A
                                            // and Timer B of GPTM0 is
                                            // triggered

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_IMR register.
//
//*****************************************************************************
#define TIMER_IMR_WUEIM         0x00010000  // 32/64-Bit Wide GPTM Write Update
                                            // Error Interrupt Mask
#define TIMER_IMR_TBMIM         0x00000800  // GPTM Timer B Match Interrupt
                                            // Mask
#define TIMER_IMR_CBEIM         0x00000400  // GPTM Timer B Capture Mode Event
                                            // Interrupt Mask
#define TIMER_IMR_CBMIM         0x00000200  // GPTM Timer B Capture Mode Match
                                            // Interrupt Mask
#define TIMER_IMR_TBTOIM        0x00000100  // GPTM Timer B Time-Out Interrupt
                                            // Mask
#define TIMER_IMR_TAMIM         0x00000010  // GPTM Timer A Match Interrupt
                                            // Mask
#define TIMER_IMR_RTCIM         0x00000008  // GPTM RTC Interrupt Mask
#define TIMER_IMR_CAEIM         0x00000004  // GPTM Timer A Capture Mode Event
                                            // Interrupt Mask
#define TIMER_IMR_CAMIM         0x00000002  // GPTM Timer A Capture Mode Match
                                            // Interrupt Mask
#define TIMER_IMR_TATOIM        0x00000001  // GPTM Timer A Time-Out Interrupt
                                            // Mask

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_RIS register.
//
//*****************************************************************************
#define TIMER_RIS_WUERIS        0x00010000  // 32/64-Bit Wide GPTM Write Update
                                            // Error Raw Interrupt Status
#define TIMER_RIS_TBMRIS        0x00000800  // GPTM Timer B Match Raw Interrupt
#define TIMER_RIS_CBERIS        0x00000400  // GPTM Timer B Capture Mode Event
                                            // Raw Interrupt
#define TIMER_RIS_CBMRIS        0x00000200  // GPTM Timer B Capture Mode Match
                                            // Raw Interrupt
#define TIMER_RIS_TBTORIS       0x00000100  // GPTM Timer B Time-Out Raw
                                            // Interrupt
#define TIMER_RIS_TAMRIS        0x00000010  // GPTM Timer A Match Raw Interrupt
#define TIMER_RIS_RTCRIS        0x00000008  // GPTM RTC Raw Interrupt
#define TIMER_RIS_CAERIS        0x00000004  // GPTM Timer A Capture Mode Event
                                            // Raw Interrupt
#define TIMER_RIS_CAMRIS        0x00000002  // GPTM Timer A Capture Mode Match
                                            // Raw Interrupt
#define TIMER_RIS_TATORIS       0x00000001  // GPTM Timer A Time-Out Raw
                                            // Interrupt

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_MIS register.
//
//*****************************************************************************
#define TIMER_MIS_WUEMIS        0x00010000  // 32/64-Bit Wide GPTM Write Update
                                            // Error Masked Interrupt Status
#define TIMER_MIS_TBMMIS        0x00000800  // GPTM Timer B Match Masked
                                            // Interrupt
#define TIMER_MIS_CBEMIS        0x00000400  // GPTM Timer B Capture Mode Event
                                            // Masked Interrupt
#define TIMER_MIS_CBMMIS        0x00000200  // GPTM Timer B Capture Mode Match
                                            // Masked Interrupt
#define TIMER_MIS_TBTOMIS       0x00000100  // GPTM Timer B Time-Out Masked
                                            // Interrupt
#define TIMER_MIS_TAMMIS        0x00000010  // GPTM Timer A Match Masked
                                            // Interrupt
#define TIMER_MIS_RTCMIS        0x00000008  // GPTM RTC Masked Interrupt
#define TIMER_MIS_CAEMIS        0x00000004  // GPTM Timer A Capture Mode Event
                                            // Masked Interrupt
#define TIMER_MIS_CAMMIS        0x00000002  // GPTM Timer A Capture Mode Match
                                            // Masked Interrupt
#define TIMER_MIS_TATOMIS       0x00000001  // GPTM Timer A Time-Out Masked
                                            // Interrupt

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_ICR register.
//
//*****************************************************************************
#define TIMER_ICR_WUECINT       0x00010000  // 32/64-Bit Wide GPTM Write Update
                                            // Error Interrupt Clear
#define TIMER_ICR_TBMCINT       0x00000800  // GPTM Timer B Match Interrupt
                                            // Clear
#define TIMER_ICR_CBECINT       0x00000400  // GPTM Timer B Capture Mode Event
                                            // Interrupt Clear
#define TIMER_ICR_CBMCINT       0x00000200  // GPTM Timer B Capture Mode Match
                                            // Interrupt Clear
#define TIMER_ICR_TBTOCINT      0x00000100  // GPTM Timer B Time-Out Interrupt
                                            // Clear
#define TIMER_ICR_TAMCINT       0x00000010  // GPTM Timer A Match Interrupt
                                            // Clear
#define TIMER_ICR_RTCCINT       0x00000008  // GPTM RTC Interrupt Clear
#define TIMER_ICR_CAECINT       0x00000004  // GPTM Timer A Capture Mode Event
                                            // Interrupt Clear
#define TIMER_ICR_CAMCINT       0x00000002  // GPTM Timer A Capture Mode Match
                                            // Interrupt Clear
#define TIMER_ICR_TATOCINT      0x00000001  // GPTM Timer A Time-Out Raw
                                            // Interrupt

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAILR register.
//
//*****************************************************************************
#define TIMER_TAILR_M           0xFFFFFFFF  // GPTM Timer A Interval Load
                                            // Register
#define TIMER_TAILR_S           0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBILR register.
//
//*****************************************************************************
#define TIMER_TBILR_M           0xFFFFFFFF  // GPTM Timer B Interval Load
                                            // Register
#define TIMER_TBILR_S           0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAMATCHR
// register.
//
//*****************************************************************************
#define TIMER_TAMATCHR_TAMR_M   0xFFFFFFFF  // GPTM Timer A Match Register
#define TIMER_TAMATCHR_TAMR_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBMATCHR
// register.
//
//*****************************************************************************
#define TIMER_TBMATCHR_TBMR_M   0xFFFFFFFF  // GPTM Timer B Match Register
#define TIMER_TBMATCHR_TBMR_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAPR register.
//
//*****************************************************************************
#define TIMER_TAPR_TAPSRH_M     0x0000FF00  // GPTM Timer A Prescale High Byte
#define TIMER_TAPR_TAPSR_M      0x000000FF  // GPTM Timer A Prescale
#define TIMER_TAPR_TAPSRH_S     8
#define TIMER_TAPR_TAPSR_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBPR register.
//
//*****************************************************************************
#define TIMER_TBPR_TBPSRH_M     0x0000FF00  // GPTM Timer B Prescale High Byte
#define TIMER_TBPR_TBPSR_M      0x000000FF  // GPTM Timer B Prescale
#define TIMER_TBPR_TBPSRH_S     8
#define TIMER_TBPR_TBPSR_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAPMR register.
//
//*****************************************************************************
#define TIMER_TAPMR_TAPSMRH_M   0x0000FF00  // GPTM Timer A Prescale Match High
                                            // Byte
#define TIMER_TAPMR_TAPSMR_M    0x000000FF  // GPTM TimerA Prescale Match
#define TIMER_TAPMR_TAPSMRH_S   8
#define TIMER_TAPMR_TAPSMR_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBPMR register.
//
//*****************************************************************************
#define TIMER_TBPMR_TBPSMRH_M   0x0000FF00  // GPTM Timer B Prescale Match High
                                            // Byte
#define TIMER_TBPMR_TBPSMR_M    0x000000FF  // GPTM TimerB Prescale Match
#define TIMER_TBPMR_TBPSMRH_S   8
#define TIMER_TBPMR_TBPSMR_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAR register.
//
//*****************************************************************************
#define TIMER_TAR_M             0xFFFFFFFF  // GPTM Timer A Register
#define TIMER_TAR_S             0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBR register.
//
//*****************************************************************************
#define TIMER_TBR_M             0xFFFFFFFF  // GPTM Timer B Register
#define TIMER_TBR_S             0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAV register.
//
//*****************************************************************************
#define TIMER_TAV_M             0xFFFFFFFF  // GPTM Timer A Value
#define TIMER_TAV_S             0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBV register.
//
//*****************************************************************************
#define TIMER_TBV_M             0xFFFFFFFF  // GPTM Timer B Value
#define TIMER_TBV_S             0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_RTCPD register.
//
//*****************************************************************************
#define TIMER_RTCPD_RTCPD_M     0x0000FFFF  // RTC Predivide Counter Value
#define TIMER_RTCPD_RTCPD_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAPS register.
//
//*****************************************************************************
#define TIMER_TAPS_PSS_M        0x0000FFFF  // GPTM Timer A Prescaler Snapshot
#define TIMER_TAPS_PSS_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBPS register.
//
//*****************************************************************************
#define TIMER_TBPS_PSS_M        0x0000FFFF  // GPTM Timer A Prescaler Value
#define TIMER_TBPS_PSS_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TAPV register.
//
//*****************************************************************************
#define TIMER_TAPV_PSV_M        0x0000FFFF  // GPTM Timer A Prescaler Value
#define TIMER_TAPV_PSV_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_TBPV register.
//
//*****************************************************************************
#define TIMER_TBPV_PSV_M        0x0000FFFF  // GPTM Timer B Prescaler Value
#define TIMER_TBPV_PSV_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the TIMER_O_PP register.
//
//*****************************************************************************
#define TIMER_PP_SIZE_M         0x0000000F  // Count Size
#define TIMER_PP_SIZE_16        0x00000000  // Timer A and Timer B counters are
                                            // 16 bits each with an 8-bit
                                            // prescale counter
#define TIMER_PP_SIZE_32        0x00000001  // Timer A and Timer B counters are
                                            // 32 bits each with a 16-bit
                                            // prescale counter

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_ACTSS register.
//
//*****************************************************************************
#define ADC_ACTSS_BUSY          0x00010000  // ADC Busy
#define ADC_ACTSS_ASEN3         0x00000008  // ADC SS3 Enable
#define ADC_ACTSS_ASEN2         0x00000004  // ADC SS2 Enable
#define ADC_ACTSS_ASEN1         0x00000002  // ADC SS1 Enable
#define ADC_ACTSS_ASEN0         0x00000001  // ADC SS0 Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_RIS register.
//
//*****************************************************************************
#define ADC_RIS_INRDC           0x00010000  // Digital Comparator Raw Interrupt
                                            // Status
#define ADC_RIS_INR3            0x00000008  // SS3 Raw Interrupt Status
#define ADC_RIS_INR2            0x00000004  // SS2 Raw Interrupt Status
#define ADC_RIS_INR1            0x00000002  // SS1 Raw Interrupt Status
#define ADC_RIS_INR0            0x00000001  // SS0 Raw Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_IM register.
//
//*****************************************************************************
#define ADC_IM_DCONSS3          0x00080000  // Digital Comparator Interrupt on
                                            // SS3
#define ADC_IM_DCONSS2          0x00040000  // Digital Comparator Interrupt on
                                            // SS2
#define ADC_IM_DCONSS1          0x00020000  // Digital Comparator Interrupt on
                                            // SS1
#define ADC_IM_DCONSS0          0x00010000  // Digital Comparator Interrupt on
                                            // SS0
#define ADC_IM_MASK3            0x00000008  // SS3 Interrupt Mask
#define ADC_IM_MASK2            0x00000004  // SS2 Interrupt Mask
#define ADC_IM_MASK1            0x00000002  // SS1 Interrupt Mask
#define ADC_IM_MASK0            0x00000001  // SS0 Interrupt Mask

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_ISC register.
//
//*****************************************************************************
#define ADC_ISC_DCINSS3         0x00080000  // Digital Comparator Interrupt
                                            // Status on SS3
#define ADC_ISC_DCINSS2         0x00040000  // Digital Comparator Interrupt
                                            // Status on SS2
#define ADC_ISC_DCINSS1         0x00020000  // Digital Comparator Interrupt
                                            // Status on SS1
#define ADC_ISC_DCINSS0         0x00010000  // Digital Comparator Interrupt
                                            // Status on SS0
#define ADC_ISC_IN3             0x00000008  // SS3 Interrupt Status and Clear
#define ADC_ISC_IN2             0x00000004  // SS2 Interrupt Status and Clear
#define ADC_ISC_IN1             0x00000002  // SS1 Interrupt Status and Clear
#define ADC_ISC_IN0             0x00000001  // SS0 Interrupt Status and Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_OSTAT register.
//
//*****************************************************************************
#define ADC_OSTAT_OV3           0x00000008  // SS3 FIFO Overflow
#define ADC_OSTAT_OV2           0x00000004  // SS2 FIFO Overflow
#define ADC_OSTAT_OV1           0x00000002  // SS1 FIFO Overflow
#define ADC_OSTAT_OV0           0x00000001  // SS0 FIFO Overflow

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_EMUX register.
//
//*****************************************************************************
#define ADC_EMUX_EM3_M          0x0000F000  // SS3 Trigger Select
#define ADC_EMUX_EM3_PROCESSOR  0x00000000  // Processor (default)
#define ADC_EMUX_EM3_COMP0      0x00001000  // Analog Comparator 0
#define ADC_EMUX_EM3_COMP1      0x00002000  // Analog Comparator 1
#define ADC_EMUX_EM3_EXTERNAL   0x00004000  // External (GPIO Pins)
#define ADC_EMUX_EM3_TIMER      0x00005000  // Timer
#define ADC_EMUX_EM3_ALWAYS     0x0000F000  // Always (continuously sample)
#define ADC_EMUX_EM2_M          0x00000F00  // SS2 Trigger Select
#define ADC_EMUX_EM2_PROCESSOR  0x00000000  // Processor (default)
#define ADC_EMUX_EM2_COMP0      0x00000100  // Analog Comparator 0
#define ADC_EMUX_EM2_COMP1      0x00000200  // Analog Comparator 1
#define ADC_EMUX_EM2_EXTERNAL   0x00000400  // External (GPIO Pins)
#define ADC_EMUX_EM2_TIMER      0x00000500  // Timer
#define ADC_EMUX_EM2_ALWAYS     0x00000F00  // Always (continuously sample)
#define ADC_EMUX_EM1_M          0x000000F0  // SS1 Trigger Select
#define ADC_EMUX_EM1_PROCESSOR  0x00000000  // Processor (default)
#define ADC_EMUX_EM1_COMP0      0x00000010  // Analog Comparator 0
#define ADC_EMUX_EM1_COMP1      0x00000020  // Analog Comparator 1
#define ADC_EMUX_EM1_EXTERNAL   0x00000040  // External (GPIO Pins)
#define ADC_EMUX_EM1_TIMER      0x00000050  // Timer
#define ADC_EMUX_EM1_ALWAYS     0x000000F0  // Always (continuously sample)
#define ADC_EMUX_EM0_M          0x0000000F  // SS0 Trigger Select
#define ADC_EMUX_EM0_PROCESSOR  0x00000000  // Processor (default)
#define ADC_EMUX_EM0_COMP0      0x00000001  // Analog Comparator 0
#define ADC_EMUX_EM0_COMP1      0x00000002  // Analog Comparator 1
#define ADC_EMUX_EM0_EXTERNAL   0x00000004  // External (GPIO Pins)
#define ADC_EMUX_EM0_TIMER      0x00000005  // Timer
#define ADC_EMUX_EM0_ALWAYS     0x0000000F  // Always (continuously sample)

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_USTAT register.
//
//*****************************************************************************
#define ADC_USTAT_UV3           0x00000008  // SS3 FIFO Underflow
#define ADC_USTAT_UV2           0x00000004  // SS2 FIFO Underflow
#define ADC_USTAT_UV1           0x00000002  // SS1 FIFO Underflow
#define ADC_USTAT_UV0           0x00000001  // SS0 FIFO Underflow

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSPRI register.
//
//*****************************************************************************
#define ADC_SSPRI_SS3_M         0x00003000  // SS3 Priority
#define ADC_SSPRI_SS2_M         0x00000300  // SS2 Priority
#define ADC_SSPRI_SS1_M         0x00000030  // SS1 Priority
#define ADC_SSPRI_SS0_M         0x00000003  // SS0 Priority

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SPC register.
//
//*****************************************************************************
#define ADC_SPC_PHASE_M         0x0000000F  // Phase Difference
#define ADC_SPC_PHASE_0         0x00000000  // ADC sample lags by 0.0
#define ADC_SPC_PHASE_22_5      0x00000001  // ADC sample lags by 22.5
#define ADC_SPC_PHASE_45        0x00000002  // ADC sample lags by 45.0
#define ADC_SPC_PHASE_67_5      0x00000003  // ADC sample lags by 67.5
#define ADC_SPC_PHASE_90        0x00000004  // ADC sample lags by 90.0
#define ADC_SPC_PHASE_112_5     0x00000005  // ADC sample lags by 112.5
#define ADC_SPC_PHASE_135       0x00000006  // ADC sample lags by 135.0
#define ADC_SPC_PHASE_157_5     0x00000007  // ADC sample lags by 157.5
#define ADC_SPC_PHASE_180       0x00000008  // ADC sample lags by 180.0
#define ADC_SPC_PHASE_202_5     0x00000009  // ADC sample lags by 202.5
#define ADC_SPC_PHASE_225       0x0000000A  // ADC sample lags by 225.0
#define ADC_SPC_PHASE_247_5     0x0000000B  // ADC sample lags by 247.5
#define ADC_SPC_PHASE_270       0x0000000C  // ADC sample lags by 270.0
#define ADC_SPC_PHASE_292_5     0x0000000D  // ADC sample lags by 292.5
#define ADC_SPC_PHASE_315       0x0000000E  // ADC sample lags by 315.0
#define ADC_SPC_PHASE_337_5     0x0000000F  // ADC sample lags by 337.5

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_PSSI register.
//
//*****************************************************************************
#define ADC_PSSI_GSYNC          0x80000000  // Global Synchronize
#define ADC_PSSI_SYNCWAIT       0x08000000  // Synchronize Wait
#define ADC_PSSI_SS3            0x00000008  // SS3 Initiate
#define ADC_PSSI_SS2            0x00000004  // SS2 Initiate
#define ADC_PSSI_SS1            0x00000002  // SS1 Initiate
#define ADC_PSSI_SS0            0x00000001  // SS0 Initiate

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SAC register.
//
//*****************************************************************************
#define ADC_SAC_AVG_M           0x00000007  // Hardware Averaging Control
#define ADC_SAC_AVG_OFF         0x00000000  // No hardware oversampling
#define ADC_SAC_AVG_2X          0x00000001  // 2x hardware oversampling
#define ADC_SAC_AVG_4X          0x00000002  // 4x hardware oversampling
#define ADC_SAC_AVG_8X          0x00000003  // 8x hardware oversampling
#define ADC_SAC_AVG_16X         0x00000004  // 16x hardware oversampling
#define ADC_SAC_AVG_32X         0x00000005  // 32x hardware oversampling
#define ADC_SAC_AVG_64X         0x00000006  // 64x hardware oversampling

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCISC register.
//
//*****************************************************************************
#define ADC_DCISC_DCINT7        0x00000080  // Digital Comparator 7 Interrupt
                                            // Status and Clear
#define ADC_DCISC_DCINT6        0x00000040  // Digital Comparator 6 Interrupt
                                            // Status and Clear
#define ADC_DCISC_DCINT5        0x00000020  // Digital Comparator 5 Interrupt
                                            // Status and Clear
#define ADC_DCISC_DCINT4        0x00000010  // Digital Comparator 4 Interrupt
                                            // Status and Clear
#define ADC_DCISC_DCINT3        0x00000008  // Digital Comparator 3 Interrupt
                                            // Status and Clear
#define ADC_DCISC_DCINT2        0x00000004  // Digital Comparator 2 Interrupt
                                            // Status and Clear
#define ADC_DCISC_DCINT1        0x00000002  // Digital Comparator 1 Interrupt
                                            // Status and Clear
#define ADC_DCISC_DCINT0        0x00000001  // Digital Comparator 0 Interrupt
                                            // Status and Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_CTL register.
//
//*****************************************************************************
#define ADC_CTL_VREF_M          0x00000001  // Voltage Reference Select
#define ADC_CTL_VREF_INTERNAL   0x00000000  // VDDA and GNDA are the voltage
                                            // references

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX0 register.
//
//*****************************************************************************
#define ADC_SSMUX0_MUX7_M       0xF0000000  // 8th Sample Input Select
#define ADC_SSMUX0_MUX6_M       0x0F000000  // 7th Sample Input Select
#define ADC_SSMUX0_MUX5_M       0x00F00000  // 6th Sample Input Select
#define ADC_SSMUX0_MUX4_M       0x000F0000  // 5th Sample Input Select
#define ADC_SSMUX0_MUX3_M       0x0000F000  // 4th Sample Input Select
#define ADC_SSMUX0_MUX2_M       0x00000F00  // 3rd Sample Input Select
#define ADC_SSMUX0_MUX1_M       0x000000F0  // 2nd Sample Input Select
#define ADC_SSMUX0_MUX0_M       0x0000000F  // 1st Sample Input Select
#define ADC_SSMUX0_MUX7_S       28
#define ADC_SSMUX0_MUX6_S       24
#define ADC_SSMUX0_MUX5_S       20
#define ADC_SSMUX0_MUX4_S       16
#define ADC_SSMUX0_MUX3_S       12
#define ADC_SSMUX0_MUX2_S       8
#define ADC_SSMUX0_MUX1_S       4
#define ADC_SSMUX0_MUX0_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL0 register.
//
//*****************************************************************************
#define ADC_SSCTL0_TS7          0x80000000  // 8th Sample Temp Sensor Select
#define ADC_SSCTL0_IE7          0x40000000  // 8th Sample Interrupt Enable
#define ADC_SSCTL0_END7         0x20000000  // 8th Sample is End of Sequence
#define ADC_SSCTL0_D7           0x10000000  // 8th Sample Differential Input
                                            // Select
#define ADC_SSCTL0_TS6          0x08000000  // 7th Sample Temp Sensor Select
#define ADC_SSCTL0_IE6          0x04000000  // 7th Sample Interrupt Enable
#define ADC_SSCTL0_END6         0x02000000  // 7th Sample is End of Sequence
#define ADC_SSCTL0_D6           0x01000000  // 7th Sample Differential Input
                                            // Select
#define ADC_SSCTL0_TS5          0x00800000  // 6th Sample Temp Sensor Select
#define ADC_SSCTL0_IE5          0x00400000  // 6th Sample Interrupt Enable
#define ADC_SSCTL0_END5         0x00200000  // 6th Sample is End of Sequence
#define ADC_SSCTL0_D5           0x00100000  // 6th Sample Differential Input
                                            // Select
#define ADC_SSCTL0_TS4          0x00080000  // 5th Sample Temp Sensor Select
#define ADC_SSCTL0_IE4          0x00040000  // 5th Sample Interrupt Enable
#define ADC_SSCTL0_END4         0x00020000  // 5th Sample is End of Sequence
#define ADC_SSCTL0_D4           0x00010000  // 5th Sample Differential Input
                                            // Select
#define ADC_SSCTL0_TS3          0x00008000  // 4th Sample Temp Sensor Select
#define ADC_SSCTL0_IE3          0x00004000  // 4th Sample Interrupt Enable
#define ADC_SSCTL0_END3         0x00002000  // 4th Sample is End of Sequence
#define ADC_SSCTL0_D3           0x00001000  // 4th Sample Differential Input
                                            // Select
#define ADC_SSCTL0_TS2          0x00000800  // 3rd Sample Temp Sensor Select
#define ADC_SSCTL0_IE2          0x00000400  // 3rd Sample Interrupt Enable
#define ADC_SSCTL0_END2         0x00000200  // 3rd Sample is End of Sequence
#define ADC_SSCTL0_D2           0x00000100  // 3rd Sample Differential Input
                                            // Select
#define ADC_SSCTL0_TS1          0x00000080  // 2nd Sample Temp Sensor Select
#define ADC_SSCTL0_IE1          0x00000040  // 2nd Sample Interrupt Enable
#define ADC_SSCTL0_END1         0x00000020  // 2nd Sample is End of Sequence
#define ADC_SSCTL0_D1           0x00000010  // 2nd Sample Differential Input
                                            // Select
#define ADC_SSCTL0_TS0          0x00000008  // 1st Sample Temp Sensor Select
#define ADC_SSCTL0_IE0          0x00000004  // 1st Sample Interrupt Enable
#define ADC_SSCTL0_END0         0x00000002  // 1st Sample is End of Sequence
#define ADC_SSCTL0_D0           0x00000001  // 1st Sample Differential Input
                                            // Select

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO0 register.
//
//*****************************************************************************
#define ADC_SSFIFO0_DATA_M      0x00000FFF  // Conversion Result Data
#define ADC_SSFIFO0_DATA_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT0 register.
//
//*****************************************************************************
#define ADC_SSFSTAT0_FULL       0x00001000  // FIFO Full
#define ADC_SSFSTAT0_EMPTY      0x00000100  // FIFO Empty
#define ADC_SSFSTAT0_HPTR_M     0x000000F0  // FIFO Head Pointer
#define ADC_SSFSTAT0_TPTR_M     0x0000000F  // FIFO Tail Pointer
#define ADC_SSFSTAT0_HPTR_S     4
#define ADC_SSFSTAT0_TPTR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSOP0 register.
//
//*****************************************************************************
#define ADC_SSOP0_S7DCOP        0x10000000  // Sample 7 Digital Comparator
                                            // Operation
#define ADC_SSOP0_S6DCOP        0x01000000  // Sample 6 Digital Comparator
                                            // Operation
#define ADC_SSOP0_S5DCOP        0x00100000  // Sample 5 Digital Comparator
                                            // Operation
#define ADC_SSOP0_S4DCOP        0x00010000  // Sample 4 Digital Comparator
                                            // Operation
#define ADC_SSOP0_S3DCOP        0x00001000  // Sample 3 Digital Comparator
                                            // Operation
#define ADC_SSOP0_S2DCOP        0x00000100  // Sample 2 Digital Comparator
                                            // Operation
#define ADC_SSOP0_S1DCOP        0x00000010  // Sample 1 Digital Comparator
                                            // Operation
#define ADC_SSOP0_S0DCOP        0x00000001  // Sample 0 Digital Comparator
                                            // Operation

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSDC0 register.
//
//*****************************************************************************
#define ADC_SSDC0_S7DCSEL_M     0xF0000000  // Sample 7 Digital Comparator
                                            // Select
#define ADC_SSDC0_S6DCSEL_M     0x0F000000  // Sample 6 Digital Comparator
                                            // Select
#define ADC_SSDC0_S5DCSEL_M     0x00F00000  // Sample 5 Digital Comparator
                                            // Select
#define ADC_SSDC0_S4DCSEL_M     0x000F0000  // Sample 4 Digital Comparator
                                            // Select
#define ADC_SSDC0_S3DCSEL_M     0x0000F000  // Sample 3 Digital Comparator
                                            // Select
#define ADC_SSDC0_S2DCSEL_M     0x00000F00  // Sample 2 Digital Comparator
                                            // Select
#define ADC_SSDC0_S1DCSEL_M     0x000000F0  // Sample 1 Digital Comparator
                                            // Select
#define ADC_SSDC0_S0DCSEL_M     0x0000000F  // Sample 0 Digital Comparator
                                            // Select
#define ADC_SSDC0_S6DCSEL_S     24
#define ADC_SSDC0_S5DCSEL_S     20
#define ADC_SSDC0_S4DCSEL_S     16
#define ADC_SSDC0_S3DCSEL_S     12
#define ADC_SSDC0_S2DCSEL_S     8
#define ADC_SSDC0_S1DCSEL_S     4
#define ADC_SSDC0_S0DCSEL_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX1 register.
//
//*****************************************************************************
#define ADC_SSMUX1_MUX3_M       0x0000F000  // 4th Sample Input Select
#define ADC_SSMUX1_MUX2_M       0x00000F00  // 3rd Sample Input Select
#define ADC_SSMUX1_MUX1_M       0x000000F0  // 2nd Sample Input Select
#define ADC_SSMUX1_MUX0_M       0x0000000F  // 1st Sample Input Select
#define ADC_SSMUX1_MUX3_S       12
#define ADC_SSMUX1_MUX2_S       8
#define ADC_SSMUX1_MUX1_S       4
#define ADC_SSMUX1_MUX0_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL1 register.
//
//*****************************************************************************
#define ADC_SSCTL1_TS3          0x00008000  // 4th Sample Temp Sensor Select
#define ADC_SSCTL1_IE3          0x00004000  // 4th Sample Interrupt Enable
#define ADC_SSCTL1_END3         0x00002000  // 4th Sample is End of Sequence
#define ADC_SSCTL1_D3           0x00001000  // 4th Sample Differential Input
                                            // Select
#define ADC_SSCTL1_TS2          0x00000800  // 3rd Sample Temp Sensor Select
#define ADC_SSCTL1_IE2          0x00000400  // 3rd Sample Interrupt Enable
#define ADC_SSCTL1_END2         0x00000200  // 3rd Sample is End of Sequence
#define ADC_SSCTL1_D2           0x00000100  // 3rd Sample Differential Input
                                            // Select
#define ADC_SSCTL1_TS1          0x00000080  // 2nd Sample Temp Sensor Select
#define ADC_SSCTL1_IE1          0x00000040  // 2nd Sample Interrupt Enable
#define ADC_SSCTL1_END1         0x00000020  // 2nd Sample is End of Sequence
#define ADC_SSCTL1_D1           0x00000010  // 2nd Sample Differential Input
                                            // Select
#define ADC_SSCTL1_TS0          0x00000008  // 1st Sample Temp Sensor Select
#define ADC_SSCTL1_IE0          0x00000004  // 1st Sample Interrupt Enable
#define ADC_SSCTL1_END0         0x00000002  // 1st Sample is End of Sequence
#define ADC_SSCTL1_D0           0x00000001  // 1st Sample Differential Input
                                            // Select

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO1 register.
//
//*****************************************************************************
#define ADC_SSFIFO1_DATA_M      0x00000FFF  // Conversion Result Data
#define ADC_SSFIFO1_DATA_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT1 register.
//
//*****************************************************************************
#define ADC_SSFSTAT1_FULL       0x00001000  // FIFO Full
#define ADC_SSFSTAT1_EMPTY      0x00000100  // FIFO Empty
#define ADC_SSFSTAT1_HPTR_M     0x000000F0  // FIFO Head Pointer
#define ADC_SSFSTAT1_TPTR_M     0x0000000F  // FIFO Tail Pointer
#define ADC_SSFSTAT1_HPTR_S     4
#define ADC_SSFSTAT1_TPTR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSOP1 register.
//
//*****************************************************************************
#define ADC_SSOP1_S3DCOP        0x00001000  // Sample 3 Digital Comparator
                                            // Operation
#define ADC_SSOP1_S2DCOP        0x00000100  // Sample 2 Digital Comparator
                                            // Operation
#define ADC_SSOP1_S1DCOP        0x00000010  // Sample 1 Digital Comparator
                                            // Operation
#define ADC_SSOP1_S0DCOP        0x00000001  // Sample 0 Digital Comparator
                                            // Operation

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSDC1 register.
//
//*****************************************************************************
#define ADC_SSDC1_S3DCSEL_M     0x0000F000  // Sample 3 Digital Comparator
                                            // Select
#define ADC_SSDC1_S2DCSEL_M     0x00000F00  // Sample 2 Digital Comparator
                                            // Select
#define ADC_SSDC1_S1DCSEL_M     0x000000F0  // Sample 1 Digital Comparator
                                            // Select
#define ADC_SSDC1_S0DCSEL_M     0x0000000F  // Sample 0 Digital Comparator
                                            // Select
#define ADC_SSDC1_S2DCSEL_S     8
#define ADC_SSDC1_S1DCSEL_S     4
#define ADC_SSDC1_S0DCSEL_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX2 register.
//
//*****************************************************************************
#define ADC_SSMUX2_MUX3_M       0x0000F000  // 4th Sample Input Select
#define ADC_SSMUX2_MUX2_M       0x00000F00  // 3rd Sample Input Select
#define ADC_SSMUX2_MUX1_M       0x000000F0  // 2nd Sample Input Select
#define ADC_SSMUX2_MUX0_M       0x0000000F  // 1st Sample Input Select
#define ADC_SSMUX2_MUX3_S       12
#define ADC_SSMUX2_MUX2_S       8
#define ADC_SSMUX2_MUX1_S       4
#define ADC_SSMUX2_MUX0_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL2 register.
//
//*****************************************************************************
#define ADC_SSCTL2_TS3          0x00008000  // 4th Sample Temp Sensor Select
#define ADC_SSCTL2_IE3          0x00004000  // 4th Sample Interrupt Enable
#define ADC_SSCTL2_END3         0x00002000  // 4th Sample is End of Sequence
#define ADC_SSCTL2_D3           0x00001000  // 4th Sample Differential Input
                                            // Select
#define ADC_SSCTL2_TS2          0x00000800  // 3rd Sample Temp Sensor Select
#define ADC_SSCTL2_IE2          0x00000400  // 3rd Sample Interrupt Enable
#define ADC_SSCTL2_END2         0x00000200  // 3rd Sample is End of Sequence
#define ADC_SSCTL2_D2           0x00000100  // 3rd Sample Differential Input
                                            // Select
#define ADC_SSCTL2_TS1          0x00000080  // 2nd Sample Temp Sensor Select
#define ADC_SSCTL2_IE1          0x00000040  // 2nd Sample Interrupt Enable
#define ADC_SSCTL2_END1         0x00000020  // 2nd Sample is End of Sequence
#define ADC_SSCTL2_D1           0x00000010  // 2nd Sample Differential Input
                                            // Select
#define ADC_SSCTL2_TS0          0x00000008  // 1st Sample Temp Sensor Select
#define ADC_SSCTL2_IE0          0x00000004  // 1st Sample Interrupt Enable
#define ADC_SSCTL2_END0         0x00000002  // 1st Sample is End of Sequence
#define ADC_SSCTL2_D0           0x00000001  // 1st Sample Differential Input
                                            // Select

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO2 register.
//
//*****************************************************************************
#define ADC_SSFIFO2_DATA_M      0x00000FFF  // Conversion Result Data
#define ADC_SSFIFO2_DATA_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT2 register.
//
//*****************************************************************************
#define ADC_SSFSTAT2_FULL       0x00001000  // FIFO Full
#define ADC_SSFSTAT2_EMPTY      0x00000100  // FIFO Empty
#define ADC_SSFSTAT2_HPTR_M     0x000000F0  // FIFO Head Pointer
#define ADC_SSFSTAT2_TPTR_M     0x0000000F  // FIFO Tail Pointer
#define ADC_SSFSTAT2_HPTR_S     4
#define ADC_SSFSTAT2_TPTR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSOP2 register.
//
//*****************************************************************************
#define ADC_SSOP2_S3DCOP        0x00001000  // Sample 3 Digital Comparator
                                            // Operation
#define ADC_SSOP2_S2DCOP        0x00000100  // Sample 2 Digital Comparator
                                            // Operation
#define ADC_SSOP2_S1DCOP        0x00000010  // Sample 1 Digital Comparator
                                            // Operation
#define ADC_SSOP2_S0DCOP        0x00000001  // Sample 0 Digital Comparator
                                            // Operation

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSDC2 register.
//
//*****************************************************************************
#define ADC_SSDC2_S3DCSEL_M     0x0000F000  // Sample 3 Digital Comparator
                                            // Select
#define ADC_SSDC2_S2DCSEL_M     0x00000F00  // Sample 2 Digital Comparator
                                            // Select
#define ADC_SSDC2_S1DCSEL_M     0x000000F0  // Sample 1 Digital Comparator
                                            // Select
#define ADC_SSDC2_S0DCSEL_M     0x0000000F  // Sample 0 Digital Comparator
                                            // Select
#define ADC_SSDC2_S2DCSEL_S     8
#define ADC_SSDC2_S1DCSEL_S     4
#define ADC_SSDC2_S0DCSEL_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSMUX3 register.
//
//*****************************************************************************
#define ADC_SSMUX3_MUX0_M       0x0000000F  // 1st Sample Input Select
#define ADC_SSMUX3_MUX0_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSCTL3 register.
//
//*****************************************************************************
#define ADC_SSCTL3_TS0          0x00000008  // 1st Sample Temp Sensor Select
#define ADC_SSCTL3_IE0          0x00000004  // Sample Interrupt Enable
#define ADC_SSCTL3_END0         0x00000002  // End of Sequence
#define ADC_SSCTL3_D0           0x00000001  // Sample Differential Input Select

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFIFO3 register.
//
//*****************************************************************************
#define ADC_SSFIFO3_DATA_M      0x00000FFF  // Conversion Result Data
#define ADC_SSFIFO3_DATA_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSFSTAT3 register.
//
//*****************************************************************************
#define ADC_SSFSTAT3_FULL       0x00001000  // FIFO Full
#define ADC_SSFSTAT3_EMPTY      0x00000100  // FIFO Empty
#define ADC_SSFSTAT3_HPTR_M     0x000000F0  // FIFO Head Pointer
#define ADC_SSFSTAT3_TPTR_M     0x0000000F  // FIFO Tail Pointer
#define ADC_SSFSTAT3_HPTR_S     4
#define ADC_SSFSTAT3_TPTR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSOP3 register.
//
//*****************************************************************************
#define ADC_SSOP3_S0DCOP        0x00000001  // Sample 0 Digital Comparator
                                            // Operation

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_SSDC3 register.
//
//*****************************************************************************
#define ADC_SSDC3_S0DCSEL_M     0x0000000F  // Sample 0 Digital Comparator
                                            // Select

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCRIC register.
//
//*****************************************************************************
#define ADC_DCRIC_DCTRIG7       0x00800000  // Digital Comparator Trigger 7
#define ADC_DCRIC_DCTRIG6       0x00400000  // Digital Comparator Trigger 6
#define ADC_DCRIC_DCTRIG5       0x00200000  // Digital Comparator Trigger 5
#define ADC_DCRIC_DCTRIG4       0x00100000  // Digital Comparator Trigger 4
#define ADC_DCRIC_DCTRIG3       0x00080000  // Digital Comparator Trigger 3
#define ADC_DCRIC_DCTRIG2       0x00040000  // Digital Comparator Trigger 2
#define ADC_DCRIC_DCTRIG1       0x00020000  // Digital Comparator Trigger 1
#define ADC_DCRIC_DCTRIG0       0x00010000  // Digital Comparator Trigger 0
#define ADC_DCRIC_DCINT7        0x00000080  // Digital Comparator Interrupt 7
#define ADC_DCRIC_DCINT6        0x00000040  // Digital Comparator Interrupt 6
#define ADC_DCRIC_DCINT5        0x00000020  // Digital Comparator Interrupt 5
#define ADC_DCRIC_DCINT4        0x00000010  // Digital Comparator Interrupt 4
#define ADC_DCRIC_DCINT3        0x00000008  // Digital Comparator Interrupt 3
#define ADC_DCRIC_DCINT2        0x00000004  // Digital Comparator Interrupt 2
#define ADC_DCRIC_DCINT1        0x00000002  // Digital Comparator Interrupt 1
#define ADC_DCRIC_DCINT0        0x00000001  // Digital Comparator Interrupt 0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL0 register.
//
//*****************************************************************************
#define ADC_DCCTL0_CIE          0x00000010  // Comparison Interrupt Enable
#define ADC_DCCTL0_CIC_M        0x0000000C  // Comparison Interrupt Condition
#define ADC_DCCTL0_CIC_LOW      0x00000000  // Low Band
#define ADC_DCCTL0_CIC_MID      0x00000004  // Mid Band
#define ADC_DCCTL0_CIC_HIGH     0x0000000C  // High Band
#define ADC_DCCTL0_CIM_M        0x00000003  // Comparison Interrupt Mode
#define ADC_DCCTL0_CIM_ALWAYS   0x00000000  // Always
#define ADC_DCCTL0_CIM_ONCE     0x00000001  // Once
#define ADC_DCCTL0_CIM_HALWAYS  0x00000002  // Hysteresis Always
#define ADC_DCCTL0_CIM_HONCE    0x00000003  // Hysteresis Once

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL1 register.
//
//*****************************************************************************
#define ADC_DCCTL1_CIE          0x00000010  // Comparison Interrupt Enable
#define ADC_DCCTL1_CIC_M        0x0000000C  // Comparison Interrupt Condition
#define ADC_DCCTL1_CIC_LOW      0x00000000  // Low Band
#define ADC_DCCTL1_CIC_MID      0x00000004  // Mid Band
#define ADC_DCCTL1_CIC_HIGH     0x0000000C  // High Band
#define ADC_DCCTL1_CIM_M        0x00000003  // Comparison Interrupt Mode
#define ADC_DCCTL1_CIM_ALWAYS   0x00000000  // Always
#define ADC_DCCTL1_CIM_ONCE     0x00000001  // Once
#define ADC_DCCTL1_CIM_HALWAYS  0x00000002  // Hysteresis Always
#define ADC_DCCTL1_CIM_HONCE    0x00000003  // Hysteresis Once

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL2 register.
//
//*****************************************************************************
#define ADC_DCCTL2_CIE          0x00000010  // Comparison Interrupt Enable
#define ADC_DCCTL2_CIC_M        0x0000000C  // Comparison Interrupt Condition
#define ADC_DCCTL2_CIC_LOW      0x00000000  // Low Band
#define ADC_DCCTL2_CIC_MID      0x00000004  // Mid Band
#define ADC_DCCTL2_CIC_HIGH     0x0000000C  // High Band
#define ADC_DCCTL2_CIM_M        0x00000003  // Comparison Interrupt Mode
#define ADC_DCCTL2_CIM_ALWAYS   0x00000000  // Always
#define ADC_DCCTL2_CIM_ONCE     0x00000001  // Once
#define ADC_DCCTL2_CIM_HALWAYS  0x00000002  // Hysteresis Always
#define ADC_DCCTL2_CIM_HONCE    0x00000003  // Hysteresis Once

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL3 register.
//
//*****************************************************************************
#define ADC_DCCTL3_CIE          0x00000010  // Comparison Interrupt Enable
#define ADC_DCCTL3_CIC_M        0x0000000C  // Comparison Interrupt Condition
#define ADC_DCCTL3_CIC_LOW      0x00000000  // Low Band
#define ADC_DCCTL3_CIC_MID      0x00000004  // Mid Band
#define ADC_DCCTL3_CIC_HIGH     0x0000000C  // High Band
#define ADC_DCCTL3_CIM_M        0x00000003  // Comparison Interrupt Mode
#define ADC_DCCTL3_CIM_ALWAYS   0x00000000  // Always
#define ADC_DCCTL3_CIM_ONCE     0x00000001  // Once
#define ADC_DCCTL3_CIM_HALWAYS  0x00000002  // Hysteresis Always
#define ADC_DCCTL3_CIM_HONCE    0x00000003  // Hysteresis Once

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL4 register.
//
//*****************************************************************************
#define ADC_DCCTL4_CIE          0x00000010  // Comparison Interrupt Enable
#define ADC_DCCTL4_CIC_M        0x0000000C  // Comparison Interrupt Condition
#define ADC_DCCTL4_CIC_LOW      0x00000000  // Low Band
#define ADC_DCCTL4_CIC_MID      0x00000004  // Mid Band
#define ADC_DCCTL4_CIC_HIGH     0x0000000C  // High Band
#define ADC_DCCTL4_CIM_M        0x00000003  // Comparison Interrupt Mode
#define ADC_DCCTL4_CIM_ALWAYS   0x00000000  // Always
#define ADC_DCCTL4_CIM_ONCE     0x00000001  // Once
#define ADC_DCCTL4_CIM_HALWAYS  0x00000002  // Hysteresis Always
#define ADC_DCCTL4_CIM_HONCE    0x00000003  // Hysteresis Once

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL5 register.
//
//*****************************************************************************
#define ADC_DCCTL5_CIE          0x00000010  // Comparison Interrupt Enable
#define ADC_DCCTL5_CIC_M        0x0000000C  // Comparison Interrupt Condition
#define ADC_DCCTL5_CIC_LOW      0x00000000  // Low Band
#define ADC_DCCTL5_CIC_MID      0x00000004  // Mid Band
#define ADC_DCCTL5_CIC_HIGH     0x0000000C  // High Band
#define ADC_DCCTL5_CIM_M        0x00000003  // Comparison Interrupt Mode
#define ADC_DCCTL5_CIM_ALWAYS   0x00000000  // Always
#define ADC_DCCTL5_CIM_ONCE     0x00000001  // Once
#define ADC_DCCTL5_CIM_HALWAYS  0x00000002  // Hysteresis Always
#define ADC_DCCTL5_CIM_HONCE    0x00000003  // Hysteresis Once

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL6 register.
//
//*****************************************************************************
#define ADC_DCCTL6_CIE          0x00000010  // Comparison Interrupt Enable
#define ADC_DCCTL6_CIC_M        0x0000000C  // Comparison Interrupt Condition
#define ADC_DCCTL6_CIC_LOW      0x00000000  // Low Band
#define ADC_DCCTL6_CIC_MID      0x00000004  // Mid Band
#define ADC_DCCTL6_CIC_HIGH     0x0000000C  // High Band
#define ADC_DCCTL6_CIM_M        0x00000003  // Comparison Interrupt Mode
#define ADC_DCCTL6_CIM_ALWAYS   0x00000000  // Always
#define ADC_DCCTL6_CIM_ONCE     0x00000001  // Once
#define ADC_DCCTL6_CIM_HALWAYS  0x00000002  // Hysteresis Always
#define ADC_DCCTL6_CIM_HONCE    0x00000003  // Hysteresis Once

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCTL7 register.
//
//*****************************************************************************
#define ADC_DCCTL7_CIE          0x00000010  // Comparison Interrupt Enable
#define ADC_DCCTL7_CIC_M        0x0000000C  // Comparison Interrupt Condition
#define ADC_DCCTL7_CIC_LOW      0x00000000  // Low Band
#define ADC_DCCTL7_CIC_MID      0x00000004  // Mid Band
#define ADC_DCCTL7_CIC_HIGH     0x0000000C  // High Band
#define ADC_DCCTL7_CIM_M        0x00000003  // Comparison Interrupt Mode
#define ADC_DCCTL7_CIM_ALWAYS   0x00000000  // Always
#define ADC_DCCTL7_CIM_ONCE     0x00000001  // Once
#define ADC_DCCTL7_CIM_HALWAYS  0x00000002  // Hysteresis Always
#define ADC_DCCTL7_CIM_HONCE    0x00000003  // Hysteresis Once

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP0 register.
//
//*****************************************************************************
#define ADC_DCCMP0_COMP1_M      0x0FFF0000  // Compare 1
#define ADC_DCCMP0_COMP0_M      0x00000FFF  // Compare 0
#define ADC_DCCMP0_COMP1_S      16
#define ADC_DCCMP0_COMP0_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP1 register.
//
//*****************************************************************************
#define ADC_DCCMP1_COMP1_M      0x0FFF0000  // Compare 1
#define ADC_DCCMP1_COMP0_M      0x00000FFF  // Compare 0
#define ADC_DCCMP1_COMP1_S      16
#define ADC_DCCMP1_COMP0_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP2 register.
//
//*****************************************************************************
#define ADC_DCCMP2_COMP1_M      0x0FFF0000  // Compare 1
#define ADC_DCCMP2_COMP0_M      0x00000FFF  // Compare 0
#define ADC_DCCMP2_COMP1_S      16
#define ADC_DCCMP2_COMP0_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP3 register.
//
//*****************************************************************************
#define ADC_DCCMP3_COMP1_M      0x0FFF0000  // Compare 1
#define ADC_DCCMP3_COMP0_M      0x00000FFF  // Compare 0
#define ADC_DCCMP3_COMP1_S      16
#define ADC_DCCMP3_COMP0_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP4 register.
//
//*****************************************************************************
#define ADC_DCCMP4_COMP1_M      0x0FFF0000  // Compare 1
#define ADC_DCCMP4_COMP0_M      0x00000FFF  // Compare 0
#define ADC_DCCMP4_COMP1_S      16
#define ADC_DCCMP4_COMP0_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP5 register.
//
//*****************************************************************************
#define ADC_DCCMP5_COMP1_M      0x0FFF0000  // Compare 1
#define ADC_DCCMP5_COMP0_M      0x00000FFF  // Compare 0
#define ADC_DCCMP5_COMP1_S      16
#define ADC_DCCMP5_COMP0_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP6 register.
//
//*****************************************************************************
#define ADC_DCCMP6_COMP1_M      0x0FFF0000  // Compare 1
#define ADC_DCCMP6_COMP0_M      0x00000FFF  // Compare 0
#define ADC_DCCMP6_COMP1_S      16
#define ADC_DCCMP6_COMP0_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_DCCMP7 register.
//
//*****************************************************************************
#define ADC_DCCMP7_COMP1_M      0x0FFF0000  // Compare 1
#define ADC_DCCMP7_COMP0_M      0x00000FFF  // Compare 0
#define ADC_DCCMP7_COMP1_S      16
#define ADC_DCCMP7_COMP0_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_PP register.
//
//*****************************************************************************
#define ADC_PP_TS               0x00800000  // Temperature Sensor
#define ADC_PP_RSL_M            0x007C0000  // Resolution
#define ADC_PP_TYPE_M           0x00030000  // ADC Architecture
#define ADC_PP_TYPE_SAR         0x00000000  // SAR
#define ADC_PP_DC_M             0x0000FC00  // Digital Comparator Count
#define ADC_PP_CH_M             0x000003F0  // ADC Channel Count
#define ADC_PP_MSR_M            0x0000000F  // Maximum ADC Sample Rate
#define ADC_PP_MSR_125K         0x00000001  // 125 ksps
#define ADC_PP_MSR_250K         0x00000003  // 250 ksps
#define ADC_PP_MSR_500K         0x00000005  // 500 ksps
#define ADC_PP_MSR_1M           0x00000007  // 1 Msps
#define ADC_PP_RSL_S            18
#define ADC_PP_DC_S             10
#define ADC_PP_CH_S             4

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_PC register.
//
//*****************************************************************************
#define ADC_PC_SR_M             0x0000000F  // ADC Sample Rate
#define ADC_PC_SR_125K          0x00000001  // 125 ksps
#define ADC_PC_SR_250K          0x00000003  // 250 ksps
#define ADC_PC_SR_500K          0x00000005  // 500 ksps
#define ADC_PC_SR_1M            0x00000007  // 1 Msps

//*****************************************************************************
//
// The following are defines for the bit fields in the ADC_O_CC register.
//
//*****************************************************************************
#define ADC_CC_CS_M             0x0000000F  // ADC Clock Source
#define ADC_CC_CS_SYSPLL        0x00000000  // PLL VCO divided by CLKDIV
#define ADC_CC_CS_PIOSC         0x00000001  // PIOSC

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACMIS register.
//
//*****************************************************************************
#define COMP_ACMIS_IN1          0x00000002  // Comparator 1 Masked Interrupt
                                            // Status
#define COMP_ACMIS_IN0          0x00000001  // Comparator 0 Masked Interrupt
                                            // Status

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACRIS register.
//
//*****************************************************************************
#define COMP_ACRIS_IN1          0x00000002  // Comparator 1 Interrupt Status
#define COMP_ACRIS_IN0          0x00000001  // Comparator 0 Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACINTEN register.
//
//*****************************************************************************
#define COMP_ACINTEN_IN1        0x00000002  // Comparator 1 Interrupt Enable
#define COMP_ACINTEN_IN0        0x00000001  // Comparator 0 Interrupt Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACREFCTL
// register.
//
//*****************************************************************************
#define COMP_ACREFCTL_EN        0x00000200  // Resistor Ladder Enable
#define COMP_ACREFCTL_RNG       0x00000100  // Resistor Ladder Range
#define COMP_ACREFCTL_VREF_M    0x0000000F  // Resistor Ladder Voltage Ref
#define COMP_ACREFCTL_VREF_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACSTAT0 register.
//
//*****************************************************************************
#define COMP_ACSTAT0_OVAL       0x00000002  // Comparator Output Value

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL0 register.
//
//*****************************************************************************
#define COMP_ACCTL0_TOEN        0x00000800  // Trigger Output Enable
#define COMP_ACCTL0_ASRCP_M     0x00000600  // Analog Source Positive
#define COMP_ACCTL0_ASRCP_PIN   0x00000000  // Pin value of Cn+
#define COMP_ACCTL0_ASRCP_PIN0  0x00000200  // Pin value of C0+
#define COMP_ACCTL0_ASRCP_REF   0x00000400  // Internal voltage reference
#define COMP_ACCTL0_TSLVAL      0x00000080  // Trigger Sense Level Value
#define COMP_ACCTL0_TSEN_M      0x00000060  // Trigger Sense
#define COMP_ACCTL0_TSEN_LEVEL  0x00000000  // Level sense, see TSLVAL
#define COMP_ACCTL0_TSEN_FALL   0x00000020  // Falling edge
#define COMP_ACCTL0_TSEN_RISE   0x00000040  // Rising edge
#define COMP_ACCTL0_TSEN_BOTH   0x00000060  // Either edge
#define COMP_ACCTL0_ISLVAL      0x00000010  // Interrupt Sense Level Value
#define COMP_ACCTL0_ISEN_M      0x0000000C  // Interrupt Sense
#define COMP_ACCTL0_ISEN_LEVEL  0x00000000  // Level sense, see ISLVAL
#define COMP_ACCTL0_ISEN_FALL   0x00000004  // Falling edge
#define COMP_ACCTL0_ISEN_RISE   0x00000008  // Rising edge
#define COMP_ACCTL0_ISEN_BOTH   0x0000000C  // Either edge
#define COMP_ACCTL0_CINV        0x00000002  // Comparator Output Invert

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACSTAT1 register.
//
//*****************************************************************************
#define COMP_ACSTAT1_OVAL       0x00000002  // Comparator Output Value

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL1 register.
//
//*****************************************************************************
#define COMP_ACCTL1_TOEN        0x00000800  // Trigger Output Enable
#define COMP_ACCTL1_ASRCP_M     0x00000600  // Analog Source Positive
#define COMP_ACCTL1_ASRCP_PIN   0x00000000  // Pin value of Cn+
#define COMP_ACCTL1_ASRCP_PIN0  0x00000200  // Pin value of C0+
#define COMP_ACCTL1_ASRCP_REF   0x00000400  // Internal voltage reference
#define COMP_ACCTL1_TSLVAL      0x00000080  // Trigger Sense Level Value
#define COMP_ACCTL1_TSEN_M      0x00000060  // Trigger Sense
#define COMP_ACCTL1_TSEN_LEVEL  0x00000000  // Level sense, see TSLVAL
#define COMP_ACCTL1_TSEN_FALL   0x00000020  // Falling edge
#define COMP_ACCTL1_TSEN_RISE   0x00000040  // Rising edge
#define COMP_ACCTL1_TSEN_BOTH   0x00000060  // Either edge
#define COMP_ACCTL1_ISLVAL      0x00000010  // Interrupt Sense Level Value
#define COMP_ACCTL1_ISEN_M      0x0000000C  // Interrupt Sense
#define COMP_ACCTL1_ISEN_LEVEL  0x00000000  // Level sense, see ISLVAL
#define COMP_ACCTL1_ISEN_FALL   0x00000004  // Falling edge
#define COMP_ACCTL1_ISEN_RISE   0x00000008  // Rising edge
#define COMP_ACCTL1_ISEN_BOTH   0x0000000C  // Either edge
#define COMP_ACCTL1_CINV        0x00000002  // Comparator Output Invert

//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_PP register.
//
//*****************************************************************************
#define COMP_PP_C1O             0x00020000  // Comparator Output 1 Present
#define COMP_PP_C0O             0x00010000  // Comparator Output 0 Present
#define COMP_PP_CMP1            0x00000002  // Comparator 1 Present
#define COMP_PP_CMP0            0x00000001  // Comparator 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_CTL register.
//
//*****************************************************************************
#define CAN_CTL_TEST            0x00000080  // Test Mode Enable
#define CAN_CTL_CCE             0x00000040  // Configuration Change Enable
#define CAN_CTL_DAR             0x00000020  // Disable Automatic-Retransmission
#define CAN_CTL_EIE             0x00000008  // Error Interrupt Enable
#define CAN_CTL_SIE             0x00000004  // Status Interrupt Enable
#define CAN_CTL_IE              0x00000002  // CAN Interrupt Enable
#define CAN_CTL_INIT            0x00000001  // Initialization

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_STS register.
//
//*****************************************************************************
#define CAN_STS_BOFF            0x00000080  // Bus-Off Status
#define CAN_STS_EWARN           0x00000040  // Warning Status
#define CAN_STS_EPASS           0x00000020  // Error Passive
#define CAN_STS_RXOK            0x00000010  // Received a Message Successfully
#define CAN_STS_TXOK            0x00000008  // Transmitted a Message
                                            // Successfully
#define CAN_STS_LEC_M           0x00000007  // Last Error Code
#define CAN_STS_LEC_NONE        0x00000000  // No Error
#define CAN_STS_LEC_STUFF       0x00000001  // Stuff Error
#define CAN_STS_LEC_FORM        0x00000002  // Format Error
#define CAN_STS_LEC_ACK         0x00000003  // ACK Error
#define CAN_STS_LEC_BIT1        0x00000004  // Bit 1 Error
#define CAN_STS_LEC_BIT0        0x00000005  // Bit 0 Error
#define CAN_STS_LEC_CRC         0x00000006  // CRC Error
#define CAN_STS_LEC_NOEVENT     0x00000007  // No Event

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_ERR register.
//
//*****************************************************************************
#define CAN_ERR_RP              0x00008000  // Received Error Passive
#define CAN_ERR_REC_M           0x00007F00  // Receive Error Counter
#define CAN_ERR_TEC_M           0x000000FF  // Transmit Error Counter
#define CAN_ERR_REC_S           8
#define CAN_ERR_TEC_S           0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_BIT register.
//
//*****************************************************************************
#define CAN_BIT_TSEG2_M         0x00007000  // Time Segment after Sample Point
#define CAN_BIT_TSEG1_M         0x00000F00  // Time Segment Before Sample Point
#define CAN_BIT_SJW_M           0x000000C0  // (Re)Synchronization Jump Width
#define CAN_BIT_BRP_M           0x0000003F  // Baud Rate Prescaler
#define CAN_BIT_TSEG2_S         12
#define CAN_BIT_TSEG1_S         8
#define CAN_BIT_SJW_S           6
#define CAN_BIT_BRP_S           0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_INT register.
//
//*****************************************************************************
#define CAN_INT_INTID_M         0x0000FFFF  // Interrupt Identifier
#define CAN_INT_INTID_NONE      0x00000000  // No interrupt pending
#define CAN_INT_INTID_STATUS    0x00008000  // Status Interrupt

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TST register.
//
//*****************************************************************************
#define CAN_TST_RX              0x00000080  // Receive Observation
#define CAN_TST_TX_M            0x00000060  // Transmit Control
#define CAN_TST_TX_CANCTL       0x00000000  // CAN Module Control
#define CAN_TST_TX_SAMPLE       0x00000020  // Sample Point
#define CAN_TST_TX_DOMINANT     0x00000040  // Driven Low
#define CAN_TST_TX_RECESSIVE    0x00000060  // Driven High
#define CAN_TST_LBACK           0x00000010  // Loopback Mode
#define CAN_TST_SILENT          0x00000008  // Silent Mode
#define CAN_TST_BASIC           0x00000004  // Basic Mode

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_BRPE register.
//
//*****************************************************************************
#define CAN_BRPE_BRPE_M         0x0000000F  // Baud Rate Prescaler Extension
#define CAN_BRPE_BRPE_S         0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1CRQ register.
//
//*****************************************************************************
#define CAN_IF1CRQ_BUSY         0x00008000  // Busy Flag
#define CAN_IF1CRQ_MNUM_M       0x0000003F  // Message Number
#define CAN_IF1CRQ_MNUM_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1CMSK register.
//
//*****************************************************************************
#define CAN_IF1CMSK_WRNRD       0x00000080  // Write, Not Read
#define CAN_IF1CMSK_MASK        0x00000040  // Access Mask Bits
#define CAN_IF1CMSK_ARB         0x00000020  // Access Arbitration Bits
#define CAN_IF1CMSK_CONTROL     0x00000010  // Access Control Bits
#define CAN_IF1CMSK_CLRINTPND   0x00000008  // Clear Interrupt Pending Bit
#define CAN_IF1CMSK_NEWDAT      0x00000004  // Access New Data
#define CAN_IF1CMSK_TXRQST      0x00000004  // Access Transmission Request
#define CAN_IF1CMSK_DATAA       0x00000002  // Access Data Byte 0 to 3
#define CAN_IF1CMSK_DATAB       0x00000001  // Access Data Byte 4 to 7

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MSK1 register.
//
//*****************************************************************************
#define CAN_IF1MSK1_IDMSK_M     0x0000FFFF  // Identifier Mask
#define CAN_IF1MSK1_IDMSK_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MSK2 register.
//
//*****************************************************************************
#define CAN_IF1MSK2_MXTD        0x00008000  // Mask Extended Identifier
#define CAN_IF1MSK2_MDIR        0x00004000  // Mask Message Direction
#define CAN_IF1MSK2_IDMSK_M     0x00001FFF  // Identifier Mask
#define CAN_IF1MSK2_IDMSK_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1ARB1 register.
//
//*****************************************************************************
#define CAN_IF1ARB1_ID_M        0x0000FFFF  // Message Identifier
#define CAN_IF1ARB1_ID_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1ARB2 register.
//
//*****************************************************************************
#define CAN_IF1ARB2_MSGVAL      0x00008000  // Message Valid
#define CAN_IF1ARB2_XTD         0x00004000  // Extended Identifier
#define CAN_IF1ARB2_DIR         0x00002000  // Message Direction
#define CAN_IF1ARB2_ID_M        0x00001FFF  // Message Identifier
#define CAN_IF1ARB2_ID_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1MCTL register.
//
//*****************************************************************************
#define CAN_IF1MCTL_NEWDAT      0x00008000  // New Data
#define CAN_IF1MCTL_MSGLST      0x00004000  // Message Lost
#define CAN_IF1MCTL_INTPND      0x00002000  // Interrupt Pending
#define CAN_IF1MCTL_UMASK       0x00001000  // Use Acceptance Mask
#define CAN_IF1MCTL_TXIE        0x00000800  // Transmit Interrupt Enable
#define CAN_IF1MCTL_RXIE        0x00000400  // Receive Interrupt Enable
#define CAN_IF1MCTL_RMTEN       0x00000200  // Remote Enable
#define CAN_IF1MCTL_TXRQST      0x00000100  // Transmit Request
#define CAN_IF1MCTL_EOB         0x00000080  // End of Buffer
#define CAN_IF1MCTL_DLC_M       0x0000000F  // Data Length Code
#define CAN_IF1MCTL_DLC_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DA1 register.
//
//*****************************************************************************
#define CAN_IF1DA1_DATA_M       0x0000FFFF  // Data
#define CAN_IF1DA1_DATA_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DA2 register.
//
//*****************************************************************************
#define CAN_IF1DA2_DATA_M       0x0000FFFF  // Data
#define CAN_IF1DA2_DATA_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DB1 register.
//
//*****************************************************************************
#define CAN_IF1DB1_DATA_M       0x0000FFFF  // Data
#define CAN_IF1DB1_DATA_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF1DB2 register.
//
//*****************************************************************************
#define CAN_IF1DB2_DATA_M       0x0000FFFF  // Data
#define CAN_IF1DB2_DATA_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2CRQ register.
//
//*****************************************************************************
#define CAN_IF2CRQ_BUSY         0x00008000  // Busy Flag
#define CAN_IF2CRQ_MNUM_M       0x0000003F  // Message Number
#define CAN_IF2CRQ_MNUM_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2CMSK register.
//
//*****************************************************************************
#define CAN_IF2CMSK_WRNRD       0x00000080  // Write, Not Read
#define CAN_IF2CMSK_MASK        0x00000040  // Access Mask Bits
#define CAN_IF2CMSK_ARB         0x00000020  // Access Arbitration Bits
#define CAN_IF2CMSK_CONTROL     0x00000010  // Access Control Bits
#define CAN_IF2CMSK_CLRINTPND   0x00000008  // Clear Interrupt Pending Bit
#define CAN_IF2CMSK_NEWDAT      0x00000004  // Access New Data
#define CAN_IF2CMSK_TXRQST      0x00000004  // Access Transmission Request
#define CAN_IF2CMSK_DATAA       0x00000002  // Access Data Byte 0 to 3
#define CAN_IF2CMSK_DATAB       0x00000001  // Access Data Byte 4 to 7

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MSK1 register.
//
//*****************************************************************************
#define CAN_IF2MSK1_IDMSK_M     0x0000FFFF  // Identifier Mask
#define CAN_IF2MSK1_IDMSK_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MSK2 register.
//
//*****************************************************************************
#define CAN_IF2MSK2_MXTD        0x00008000  // Mask Extended Identifier
#define CAN_IF2MSK2_MDIR        0x00004000  // Mask Message Direction
#define CAN_IF2MSK2_IDMSK_M     0x00001FFF  // Identifier Mask
#define CAN_IF2MSK2_IDMSK_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2ARB1 register.
//
//*****************************************************************************
#define CAN_IF2ARB1_ID_M        0x0000FFFF  // Message Identifier
#define CAN_IF2ARB1_ID_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2ARB2 register.
//
//*****************************************************************************
#define CAN_IF2ARB2_MSGVAL      0x00008000  // Message Valid
#define CAN_IF2ARB2_XTD         0x00004000  // Extended Identifier
#define CAN_IF2ARB2_DIR         0x00002000  // Message Direction
#define CAN_IF2ARB2_ID_M        0x00001FFF  // Message Identifier
#define CAN_IF2ARB2_ID_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2MCTL register.
//
//*****************************************************************************
#define CAN_IF2MCTL_NEWDAT      0x00008000  // New Data
#define CAN_IF2MCTL_MSGLST      0x00004000  // Message Lost
#define CAN_IF2MCTL_INTPND      0x00002000  // Interrupt Pending
#define CAN_IF2MCTL_UMASK       0x00001000  // Use Acceptance Mask
#define CAN_IF2MCTL_TXIE        0x00000800  // Transmit Interrupt Enable
#define CAN_IF2MCTL_RXIE        0x00000400  // Receive Interrupt Enable
#define CAN_IF2MCTL_RMTEN       0x00000200  // Remote Enable
#define CAN_IF2MCTL_TXRQST      0x00000100  // Transmit Request
#define CAN_IF2MCTL_EOB         0x00000080  // End of Buffer
#define CAN_IF2MCTL_DLC_M       0x0000000F  // Data Length Code
#define CAN_IF2MCTL_DLC_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DA1 register.
//
//*****************************************************************************
#define CAN_IF2DA1_DATA_M       0x0000FFFF  // Data
#define CAN_IF2DA1_DATA_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DA2 register.
//
//*****************************************************************************
#define CAN_IF2DA2_DATA_M       0x0000FFFF  // Data
#define CAN_IF2DA2_DATA_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DB1 register.
//
//*****************************************************************************
#define CAN_IF2DB1_DATA_M       0x0000FFFF  // Data
#define CAN_IF2DB1_DATA_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_IF2DB2 register.
//
//*****************************************************************************
#define CAN_IF2DB2_DATA_M       0x0000FFFF  // Data
#define CAN_IF2DB2_DATA_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TXRQ1 register.
//
//*****************************************************************************
#define CAN_TXRQ1_TXRQST_M      0x0000FFFF  // Transmission Request Bits
#define CAN_TXRQ1_TXRQST_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_TXRQ2 register.
//
//*****************************************************************************
#define CAN_TXRQ2_TXRQST_M      0x0000FFFF  // Transmission Request Bits
#define CAN_TXRQ2_TXRQST_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_NWDA1 register.
//
//*****************************************************************************
#define CAN_NWDA1_NEWDAT_M      0x0000FFFF  // New Data Bits
#define CAN_NWDA1_NEWDAT_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_NWDA2 register.
//
//*****************************************************************************
#define CAN_NWDA2_NEWDAT_M      0x0000FFFF  // New Data Bits
#define CAN_NWDA2_NEWDAT_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG1INT register.
//
//*****************************************************************************
#define CAN_MSG1INT_INTPND_M    0x0000FFFF  // Interrupt Pending Bits
#define CAN_MSG1INT_INTPND_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG2INT register.
//
//*****************************************************************************
#define CAN_MSG2INT_INTPND_M    0x0000FFFF  // Interrupt Pending Bits
#define CAN_MSG2INT_INTPND_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG1VAL register.
//
//*****************************************************************************
#define CAN_MSG1VAL_MSGVAL_M    0x0000FFFF  // Message Valid Bits
#define CAN_MSG1VAL_MSGVAL_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the CAN_O_MSG2VAL register.
//
//*****************************************************************************
#define CAN_MSG2VAL_MSGVAL_M    0x0000FFFF  // Message Valid Bits
#define CAN_MSG2VAL_MSGVAL_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EESIZE register.
//
//*****************************************************************************
#define EEPROM_EESIZE_BLKCNT_M  0x07FF0000  // Number of 16-Word Blocks
#define EEPROM_EESIZE_WORDCNT_M 0x0000FFFF  // Number of 32-Bit Words
#define EEPROM_EESIZE_BLKCNT_S  16
#define EEPROM_EESIZE_WORDCNT_S 0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEBLOCK register.
//
//*****************************************************************************
#define EEPROM_EEBLOCK_BLOCK_M  0x0000FFFF  // Current Block
#define EEPROM_EEBLOCK_BLOCK_S  0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEOFFSET
// register.
//
//*****************************************************************************
#define EEPROM_EEOFFSET_OFFSET_M                                              \
                                0x0000000F  // Current Address Offset
#define EEPROM_EEOFFSET_OFFSET_S                                              \
                                0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EERDWR register.
//
//*****************************************************************************
#define EEPROM_EERDWR_VALUE_M   0xFFFFFFFF  // EEPROM Read or Write Data
#define EEPROM_EERDWR_VALUE_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EERDWRINC
// register.
//
//*****************************************************************************
#define EEPROM_EERDWRINC_VALUE_M                                              \
                                0xFFFFFFFF  // EEPROM Read or Write Data with
                                            // Increment
#define EEPROM_EERDWRINC_VALUE_S                                              \
                                0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEDONE register.
//
//*****************************************************************************
#define EEPROM_EEDONE_WRBUSY    0x00000020  // Write Busy
#define EEPROM_EEDONE_NOPERM    0x00000010  // Write Without Permission
#define EEPROM_EEDONE_WKCOPY    0x00000008  // Working on a Copy
#define EEPROM_EEDONE_WKERASE   0x00000004  // Working on an Erase
#define EEPROM_EEDONE_WORKING   0x00000001  // EEPROM Working

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EESUPP register.
//
//*****************************************************************************
#define EEPROM_EESUPP_PRETRY    0x00000008  // Programming Must Be Retried
#define EEPROM_EESUPP_ERETRY    0x00000004  // Erase Must Be Retried

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEUNLOCK
// register.
//
//*****************************************************************************
#define EEPROM_EEUNLOCK_UNLOCK_M                                              \
                                0xFFFFFFFF  // EEPROM Unlock

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPROT register.
//
//*****************************************************************************
#define EEPROM_EEPROT_ACC       0x00000008  // Access Control
#define EEPROM_EEPROT_PROT_M    0x00000007  // Protection Control
#define EEPROM_EEPROT_PROT_RWNPW                                              \
                                0x00000000  // This setting is the default. If
                                            // there is no password, the block
                                            // is not protected and is readable
                                            // and writable
#define EEPROM_EEPROT_PROT_RWPW 0x00000001  // If there is a password, the
                                            // block is readable or writable
                                            // only when unlocked
#define EEPROM_EEPROT_PROT_RONPW                                              \
                                0x00000002  // If there is no password, the
                                            // block is readable, not writable

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS0 register.
//
//*****************************************************************************
#define EEPROM_EEPASS0_PASS_M   0xFFFFFFFF  // Password
#define EEPROM_EEPASS0_PASS_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS1 register.
//
//*****************************************************************************
#define EEPROM_EEPASS1_PASS_M   0xFFFFFFFF  // Password
#define EEPROM_EEPASS1_PASS_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS2 register.
//
//*****************************************************************************
#define EEPROM_EEPASS2_PASS_M   0xFFFFFFFF  // Password
#define EEPROM_EEPASS2_PASS_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEINT register.
//
//*****************************************************************************
#define EEPROM_EEINT_INT        0x00000001  // Interrupt Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEHIDE register.
//
//*****************************************************************************
#define EEPROM_EEHIDE_HN_M      0xFFFFFFFE  // Hide Block

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEDBGME register.
//
//*****************************************************************************
#define EEPROM_EEDBGME_KEY_M    0xFFFF0000  // Erase Key
#define EEPROM_EEDBGME_ME       0x00000001  // Mass Erase
#define EEPROM_EEDBGME_KEY_S    16

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_PP register.
//
//*****************************************************************************
#define EEPROM_PP_SIZE_M        0x0000001F  // EEPROM Size
#define EEPROM_PP_SIZE_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSEXC_RIS register.
//
//*****************************************************************************
#define SYSEXC_RIS_FPIXCRIS     0x00000020  // Floating-Point Inexact Exception
                                            // Raw Interrupt Status
#define SYSEXC_RIS_FPOFCRIS     0x00000010  // Floating-Point Overflow
                                            // Exception Raw Interrupt Status
#define SYSEXC_RIS_FPUFCRIS     0x00000008  // Floating-Point Underflow
                                            // Exception Raw Interrupt Status
#define SYSEXC_RIS_FPIOCRIS     0x00000004  // Floating-Point Invalid Operation
                                            // Raw Interrupt Status
#define SYSEXC_RIS_FPDZCRIS     0x00000002  // Floating-Point Divide By 0
                                            // Exception Raw Interrupt Status
#define SYSEXC_RIS_FPIDCRIS     0x00000001  // Floating-Point Input Denormal
                                            // Exception Raw Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSEXC_IM register.
//
//*****************************************************************************
#define SYSEXC_IM_FPIXCIM       0x00000020  // Floating-Point Inexact Exception
                                            // Interrupt Mask
#define SYSEXC_IM_FPOFCIM       0x00000010  // Floating-Point Overflow
                                            // Exception Interrupt Mask
#define SYSEXC_IM_FPUFCIM       0x00000008  // Floating-Point Underflow
                                            // Exception Interrupt Mask
#define SYSEXC_IM_FPIOCIM       0x00000004  // Floating-Point Invalid Operation
                                            // Interrupt Mask
#define SYSEXC_IM_FPDZCIM       0x00000002  // Floating-Point Divide By 0
                                            // Exception Interrupt Mask
#define SYSEXC_IM_FPIDCIM       0x00000001  // Floating-Point Input Denormal
                                            // Exception Interrupt Mask

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSEXC_MIS register.
//
//*****************************************************************************
#define SYSEXC_MIS_FPIXCMIS     0x00000020  // Floating-Point Inexact Exception
                                            // Masked Interrupt Status
#define SYSEXC_MIS_FPOFCMIS     0x00000010  // Floating-Point Overflow
                                            // Exception Masked Interrupt
                                            // Status
#define SYSEXC_MIS_FPUFCMIS     0x00000008  // Floating-Point Underflow
                                            // Exception Masked Interrupt
                                            // Status
#define SYSEXC_MIS_FPIOCMIS     0x00000004  // Floating-Point Invalid Operation
                                            // Masked Interrupt Status
#define SYSEXC_MIS_FPDZCMIS     0x00000002  // Floating-Point Divide By 0
                                            // Exception Masked Interrupt
                                            // Status
#define SYSEXC_MIS_FPIDCMIS     0x00000001  // Floating-Point Input Denormal
                                            // Exception Masked Interrupt
                                            // Status

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSEXC_IC register.
//
//*****************************************************************************
#define SYSEXC_IC_FPIXCIC       0x00000020  // Floating-Point Inexact Exception
                                            // Interrupt Clear
#define SYSEXC_IC_FPOFCIC       0x00000010  // Floating-Point Overflow
                                            // Exception Interrupt Clear
#define SYSEXC_IC_FPUFCIC       0x00000008  // Floating-Point Underflow
                                            // Exception Interrupt Clear
#define SYSEXC_IC_FPIOCIC       0x00000004  // Floating-Point Invalid Operation
                                            // Interrupt Clear
#define SYSEXC_IC_FPDZCIC       0x00000002  // Floating-Point Divide By 0
                                            // Exception Interrupt Clear
#define SYSEXC_IC_FPIDCIC       0x00000001  // Floating-Point Input Denormal
                                            // Exception Interrupt Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMA register.
//
//*****************************************************************************
#define FLASH_FMA_OFFSET_M      0x0001FFFF  // Address Offset
#define FLASH_FMA_OFFSET_S      0

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMD register.
//
//*****************************************************************************
#define FLASH_FMD_DATA_M        0xFFFFFFFF  // Data Value
#define FLASH_FMD_DATA_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMC register.
//
//*****************************************************************************
#define FLASH_FMC_WRKEY         0xA4420000  // FLASH write key
#define FLASH_FMC_COMT          0x00000008  // Commit Register Value
#define FLASH_FMC_MERASE        0x00000004  // Mass Erase Flash Memory
#define FLASH_FMC_ERASE         0x00000002  // Erase a Page of Flash Memory
#define FLASH_FMC_WRITE         0x00000001  // Write a Word into Flash Memory

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCRIS register.
//
//*****************************************************************************
#define FLASH_FCRIS_PROGRIS     0x00002000  // Program Verify Error Raw
                                            // Interrupt Status
#define FLASH_FCRIS_ERRIS       0x00000800  // Erase Verify Error Raw Interrupt
                                            // Status
#define FLASH_FCRIS_INVDRIS     0x00000400  // Invalid Data Raw Interrupt
                                            // Status
#define FLASH_FCRIS_VOLTRIS     0x00000200  // Pump Voltage Raw Interrupt
                                            // Status
#define FLASH_FCRIS_ERIS        0x00000004  // EEPROM Raw Interrupt Status
#define FLASH_FCRIS_PRIS        0x00000002  // Programming Raw Interrupt Status
#define FLASH_FCRIS_ARIS        0x00000001  // Access Raw Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCIM register.
//
//*****************************************************************************
#define FLASH_FCIM_PROGMASK     0x00002000  // PROGVER Interrupt Mask
#define FLASH_FCIM_ERMASK       0x00000800  // ERVER Interrupt Mask
#define FLASH_FCIM_INVDMASK     0x00000400  // Invalid Data Interrupt Mask
#define FLASH_FCIM_VOLTMASK     0x00000200  // VOLT Interrupt Mask
#define FLASH_FCIM_EMASK        0x00000004  // EEPROM Interrupt Mask
#define FLASH_FCIM_PMASK        0x00000002  // Programming Interrupt Mask
#define FLASH_FCIM_AMASK        0x00000001  // Access Interrupt Mask

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCMISC register.
//
//*****************************************************************************
#define FLASH_FCMISC_PROGMISC   0x00002000  // PROGVER Masked Interrupt Status
                                            // and Clear
#define FLASH_FCMISC_ERMISC     0x00000800  // ERVER Masked Interrupt Status
                                            // and Clear
#define FLASH_FCMISC_INVDMISC   0x00000400  // Invalid Data Masked Interrupt
                                            // Status and Clear
#define FLASH_FCMISC_VOLTMISC   0x00000200  // VOLT Masked Interrupt Status and
                                            // Clear
#define FLASH_FCMISC_EMISC      0x00000004  // EEPROM Masked Interrupt Status
                                            // and Clear
#define FLASH_FCMISC_PMISC      0x00000002  // Programming Masked Interrupt
                                            // Status and Clear
#define FLASH_FCMISC_AMISC      0x00000001  // Access Masked Interrupt Status
                                            // and Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMC2 register.
//
//*****************************************************************************
#define FLASH_FMC2_WRBUF        0x00000001  // Buffered Flash Memory Write

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FWBVAL register.
//
//*****************************************************************************
#define FLASH_FWBVAL_FWB_M      0xFFFFFFFF  // Flash Memory Write Buffer

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FWBN register.
//
//*****************************************************************************
#define FLASH_FWBN_DATA_M       0xFFFFFFFF  // Data

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FSIZE register.
//
//*****************************************************************************
#define FLASH_FSIZE_SIZE_M      0x0000FFFF  // Flash Size
#define FLASH_FSIZE_SIZE_128KB  0x0000003F  // 128 KB of Flash

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_SSIZE register.
//
//*****************************************************************************
#define FLASH_SSIZE_SIZE_M      0x0000FFFF  // SRAM Size
#define FLASH_SSIZE_SIZE_32KB   0x0000007F  // 32 KB of SRAM

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_ROMSWMAP register.
//
//*****************************************************************************
#define FLASH_ROMSWMAP_SAFERTOS 0x00000001  // SafeRTOS Present

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_RMCTL register.
//
//*****************************************************************************
#define FLASH_RMCTL_BA          0x00000001  // Boot Alias

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_BOOTCFG register.
//
//*****************************************************************************
#define FLASH_BOOTCFG_NW        0x80000000  // Not Written
#define FLASH_BOOTCFG_PORT_M    0x0000E000  // Boot GPIO Port
#define FLASH_BOOTCFG_PORT_A    0x00000000  // Port A
#define FLASH_BOOTCFG_PORT_B    0x00002000  // Port B
#define FLASH_BOOTCFG_PORT_C    0x00004000  // Port C
#define FLASH_BOOTCFG_PORT_D    0x00006000  // Port D
#define FLASH_BOOTCFG_PORT_E    0x00008000  // Port E
#define FLASH_BOOTCFG_PORT_F    0x0000A000  // Port F
#define FLASH_BOOTCFG_PORT_G    0x0000C000  // Port G
#define FLASH_BOOTCFG_PORT_H    0x0000E000  // Port H
#define FLASH_BOOTCFG_PIN_M     0x00001C00  // Boot GPIO Pin
#define FLASH_BOOTCFG_PIN_0     0x00000000  // Pin 0
#define FLASH_BOOTCFG_PIN_1     0x00000400  // Pin 1
#define FLASH_BOOTCFG_PIN_2     0x00000800  // Pin 2
#define FLASH_BOOTCFG_PIN_3     0x00000C00  // Pin 3
#define FLASH_BOOTCFG_PIN_4     0x00001000  // Pin 4
#define FLASH_BOOTCFG_PIN_5     0x00001400  // Pin 5
#define FLASH_BOOTCFG_PIN_6     0x00001800  // Pin 6
#define FLASH_BOOTCFG_PIN_7     0x00001C00  // Pin 7
#define FLASH_BOOTCFG_POL       0x00000200  // Boot GPIO Polarity
#define FLASH_BOOTCFG_EN        0x00000100  // Boot GPIO Enable
#define FLASH_BOOTCFG_KEY       0x00000010  // KEY Select
#define FLASH_BOOTCFG_DBG1      0x00000002  // Debug Control 1
#define FLASH_BOOTCFG_DBG0      0x00000001  // Debug Control 0

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG0 register.
//
//*****************************************************************************
#define FLASH_USERREG0_DATA_M   0xFFFFFFFF  // User Data
#define FLASH_USERREG0_DATA_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG1 register.
//
//*****************************************************************************
#define FLASH_USERREG1_DATA_M   0xFFFFFFFF  // User Data
#define FLASH_USERREG1_DATA_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG2 register.
//
//*****************************************************************************
#define FLASH_USERREG2_DATA_M   0xFFFFFFFF  // User Data
#define FLASH_USERREG2_DATA_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG3 register.
//
//*****************************************************************************
#define FLASH_USERREG3_DATA_M   0xFFFFFFFF  // User Data
#define FLASH_USERREG3_DATA_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID0 register.
//
//*****************************************************************************
#define SYSCTL_DID0_VER_M       0x70000000  // DID0 Version
#define SYSCTL_DID0_VER_1       0x10000000  // Second version of the DID0
                                            // register format.
#define SYSCTL_DID0_CLASS_M     0x00FF0000  // Device Class
#define SYSCTL_DID0_CLASS_TM4C123                                             \
                                0x00050000  // Tiva TM4C123x and TM4E123x
                                            // microcontrollers
#define SYSCTL_DID0_MAJ_M       0x0000FF00  // Major Revision
#define SYSCTL_DID0_MAJ_REVA    0x00000000  // Revision A (initial device)
#define SYSCTL_DID0_MAJ_REVB    0x00000100  // Revision B (first base layer
                                            // revision)
#define SYSCTL_DID0_MAJ_REVC    0x00000200  // Revision C (second base layer
                                            // revision)
#define SYSCTL_DID0_MIN_M       0x000000FF  // Minor Revision
#define SYSCTL_DID0_MIN_0       0x00000000  // Initial device, or a major
                                            // revision update
#define SYSCTL_DID0_MIN_1       0x00000001  // First metal layer change
#define SYSCTL_DID0_MIN_2       0x00000002  // Second metal layer change

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID1 register.
//
//*****************************************************************************
#define SYSCTL_DID1_VER_M       0xF0000000  // DID1 Version
#define SYSCTL_DID1_VER_1       0x10000000  // fury_ib
#define SYSCTL_DID1_FAM_M       0x0F000000  // Family
#define SYSCTL_DID1_FAM_TIVA    0x00000000  // Tiva family of microcontollers
#define SYSCTL_DID1_PRTNO_M     0x00FF0000  // Part Number
#define SYSCTL_DID1_PRTNO_TM4C1230E6PM                                        \
                                0x00200000  // TM4C1230E6PM
#define SYSCTL_DID1_PINCNT_M    0x0000E000  // Package Pin Count
#define SYSCTL_DID1_PINCNT_100  0x00004000  // 100-pin LQFP package
#define SYSCTL_DID1_PINCNT_64   0x00006000  // 64-pin LQFP package
#define SYSCTL_DID1_PINCNT_144  0x00008000  // 144-pin LQFP package
#define SYSCTL_DID1_PINCNT_157  0x0000A000  // 157-pin BGA package
#define SYSCTL_DID1_PINCNT_128  0x0000C000  // 128-pin TQFP package
#define SYSCTL_DID1_TEMP_M      0x000000E0  // Temperature Range
#define SYSCTL_DID1_TEMP_I      0x00000020  // Industrial temperature range
#define SYSCTL_DID1_TEMP_E      0x00000040  // Extended temperature range
#define SYSCTL_DID1_TEMP_IE     0x00000060  // Available in both industrial
                                            // temperature range (-40C to 85C)
                                            // and extended temperature range
                                            // (-40C to 105C) devices. See
#define SYSCTL_DID1_PKG_M       0x00000018  // Package Type
#define SYSCTL_DID1_PKG_QFP     0x00000008  // QFP package
#define SYSCTL_DID1_PKG_BGA     0x00000010  // BGA package
#define SYSCTL_DID1_ROHS        0x00000004  // RoHS-Compliance
#define SYSCTL_DID1_QUAL_M      0x00000003  // Qualification Status
#define SYSCTL_DID1_QUAL_ES     0x00000000  // Engineering Sample (unqualified)
#define SYSCTL_DID1_QUAL_PP     0x00000001  // Pilot Production (unqualified)
#define SYSCTL_DID1_QUAL_FQ     0x00000002  // Fully Qualified

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC0 register.
//
//*****************************************************************************
#define SYSCTL_DC0_SRAMSZ_M     0xFFFF0000  // SRAM Size
#define SYSCTL_DC0_SRAMSZ_2KB   0x00070000  // 2 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_4KB   0x000F0000  // 4 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_6KB   0x00170000  // 6 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_8KB   0x001F0000  // 8 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_12KB  0x002F0000  // 12 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_16KB  0x003F0000  // 16 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_20KB  0x004F0000  // 20 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_24KB  0x005F0000  // 24 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_32KB  0x007F0000  // 32 KB of SRAM
#define SYSCTL_DC0_FLASHSZ_M    0x0000FFFF  // Flash Size
#define SYSCTL_DC0_FLASHSZ_8KB  0x00000003  // 8 KB of Flash
#define SYSCTL_DC0_FLASHSZ_16KB 0x00000007  // 16 KB of Flash
#define SYSCTL_DC0_FLASHSZ_32KB 0x0000000F  // 32 KB of Flash
#define SYSCTL_DC0_FLASHSZ_64KB 0x0000001F  // 64 KB of Flash
#define SYSCTL_DC0_FLASHSZ_96KB 0x0000002F  // 96 KB of Flash
#define SYSCTL_DC0_FLASHSZ_128K 0x0000003F  // 128 KB of Flash
#define SYSCTL_DC0_FLASHSZ_192K 0x0000005F  // 192 KB of Flash
#define SYSCTL_DC0_FLASHSZ_256K 0x0000007F  // 256 KB of Flash

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC1 register.
//
//*****************************************************************************
#define SYSCTL_DC1_WDT1         0x10000000  // Watchdog Timer1 Present
#define SYSCTL_DC1_CAN1         0x02000000  // CAN Module 1 Present
#define SYSCTL_DC1_CAN0         0x01000000  // CAN Module 0 Present
#define SYSCTL_DC1_PWM1         0x00200000  // PWM Module 1 Present
#define SYSCTL_DC1_PWM0         0x00100000  // PWM Module 0 Present
#define SYSCTL_DC1_ADC1         0x00020000  // ADC Module 1 Present
#define SYSCTL_DC1_ADC0         0x00010000  // ADC Module 0 Present
#define SYSCTL_DC1_MINSYSDIV_M  0x0000F000  // System Clock Divider
#define SYSCTL_DC1_MINSYSDIV_80 0x00002000  // Specifies an 80-MHz CPU clock
                                            // with a PLL divider of 2.5
#define SYSCTL_DC1_MINSYSDIV_50 0x00003000  // Specifies a 50-MHz CPU clock
                                            // with a PLL divider of 4
#define SYSCTL_DC1_MINSYSDIV_40 0x00004000  // Specifies a 40-MHz CPU clock
                                            // with a PLL divider of 5
#define SYSCTL_DC1_MINSYSDIV_25 0x00007000  // Specifies a 25-MHz clock with a
                                            // PLL divider of 8
#define SYSCTL_DC1_MINSYSDIV_20 0x00009000  // Specifies a 20-MHz clock with a
                                            // PLL divider of 10
#define SYSCTL_DC1_ADC1SPD_M    0x00000C00  // Max ADC1 Speed
#define SYSCTL_DC1_ADC1SPD_125K 0x00000000  // 125K samples/second
#define SYSCTL_DC1_ADC1SPD_250K 0x00000400  // 250K samples/second
#define SYSCTL_DC1_ADC1SPD_500K 0x00000800  // 500K samples/second
#define SYSCTL_DC1_ADC1SPD_1M   0x00000C00  // 1M samples/second
#define SYSCTL_DC1_ADC0SPD_M    0x00000300  // Max ADC0 Speed
#define SYSCTL_DC1_ADC0SPD_125K 0x00000000  // 125K samples/second
#define SYSCTL_DC1_ADC0SPD_250K 0x00000100  // 250K samples/second
#define SYSCTL_DC1_ADC0SPD_500K 0x00000200  // 500K samples/second
#define SYSCTL_DC1_ADC0SPD_1M   0x00000300  // 1M samples/second
#define SYSCTL_DC1_MPU          0x00000080  // MPU Present
#define SYSCTL_DC1_HIB          0x00000040  // Hibernation Module Present
#define SYSCTL_DC1_TEMP         0x00000020  // Temp Sensor Present
#define SYSCTL_DC1_PLL          0x00000010  // PLL Present
#define SYSCTL_DC1_WDT0         0x00000008  // Watchdog Timer 0 Present
#define SYSCTL_DC1_SWO          0x00000004  // SWO Trace Port Present
#define SYSCTL_DC1_SWD          0x00000002  // SWD Present
#define SYSCTL_DC1_JTAG         0x00000001  // JTAG Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC2 register.
//
//*****************************************************************************
#define SYSCTL_DC2_EPI0         0x40000000  // EPI Module 0 Present
#define SYSCTL_DC2_I2S0         0x10000000  // I2S Module 0 Present
#define SYSCTL_DC2_COMP2        0x04000000  // Analog Comparator 2 Present
#define SYSCTL_DC2_COMP1        0x02000000  // Analog Comparator 1 Present
#define SYSCTL_DC2_COMP0        0x01000000  // Analog Comparator 0 Present
#define SYSCTL_DC2_TIMER3       0x00080000  // Timer Module 3 Present
#define SYSCTL_DC2_TIMER2       0x00040000  // Timer Module 2 Present
#define SYSCTL_DC2_TIMER1       0x00020000  // Timer Module 1 Present
#define SYSCTL_DC2_TIMER0       0x00010000  // Timer Module 0 Present
#define SYSCTL_DC2_I2C1HS       0x00008000  // I2C Module 1 Speed
#define SYSCTL_DC2_I2C1         0x00004000  // I2C Module 1 Present
#define SYSCTL_DC2_I2C0HS       0x00002000  // I2C Module 0 Speed
#define SYSCTL_DC2_I2C0         0x00001000  // I2C Module 0 Present
#define SYSCTL_DC2_QEI1         0x00000200  // QEI Module 1 Present
#define SYSCTL_DC2_QEI0         0x00000100  // QEI Module 0 Present
#define SYSCTL_DC2_SSI1         0x00000020  // SSI Module 1 Present
#define SYSCTL_DC2_SSI0         0x00000010  // SSI Module 0 Present
#define SYSCTL_DC2_UART2        0x00000004  // UART Module 2 Present
#define SYSCTL_DC2_UART1        0x00000002  // UART Module 1 Present
#define SYSCTL_DC2_UART0        0x00000001  // UART Module 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC3 register.
//
//*****************************************************************************
#define SYSCTL_DC3_32KHZ        0x80000000  // 32KHz Input Clock Available
#define SYSCTL_DC3_CCP5         0x20000000  // T2CCP1 Pin Present
#define SYSCTL_DC3_CCP4         0x10000000  // T2CCP0 Pin Present
#define SYSCTL_DC3_CCP3         0x08000000  // T1CCP1 Pin Present
#define SYSCTL_DC3_CCP2         0x04000000  // T1CCP0 Pin Present
#define SYSCTL_DC3_CCP1         0x02000000  // T0CCP1 Pin Present
#define SYSCTL_DC3_CCP0         0x01000000  // T0CCP0 Pin Present
#define SYSCTL_DC3_ADC0AIN7     0x00800000  // ADC Module 0 AIN7 Pin Present
#define SYSCTL_DC3_ADC0AIN6     0x00400000  // ADC Module 0 AIN6 Pin Present
#define SYSCTL_DC3_ADC0AIN5     0x00200000  // ADC Module 0 AIN5 Pin Present
#define SYSCTL_DC3_ADC0AIN4     0x00100000  // ADC Module 0 AIN4 Pin Present
#define SYSCTL_DC3_ADC0AIN3     0x00080000  // ADC Module 0 AIN3 Pin Present
#define SYSCTL_DC3_ADC0AIN2     0x00040000  // ADC Module 0 AIN2 Pin Present
#define SYSCTL_DC3_ADC0AIN1     0x00020000  // ADC Module 0 AIN1 Pin Present
#define SYSCTL_DC3_ADC0AIN0     0x00010000  // ADC Module 0 AIN0 Pin Present
#define SYSCTL_DC3_PWMFAULT     0x00008000  // PWM Fault Pin Present
#define SYSCTL_DC3_C2O          0x00004000  // C2o Pin Present
#define SYSCTL_DC3_C2PLUS       0x00002000  // C2+ Pin Present
#define SYSCTL_DC3_C2MINUS      0x00001000  // C2- Pin Present
#define SYSCTL_DC3_C1O          0x00000800  // C1o Pin Present
#define SYSCTL_DC3_C1PLUS       0x00000400  // C1+ Pin Present
#define SYSCTL_DC3_C1MINUS      0x00000200  // C1- Pin Present
#define SYSCTL_DC3_C0O          0x00000100  // C0o Pin Present
#define SYSCTL_DC3_C0PLUS       0x00000080  // C0+ Pin Present
#define SYSCTL_DC3_C0MINUS      0x00000040  // C0- Pin Present
#define SYSCTL_DC3_PWM5         0x00000020  // PWM5 Pin Present
#define SYSCTL_DC3_PWM4         0x00000010  // PWM4 Pin Present
#define SYSCTL_DC3_PWM3         0x00000008  // PWM3 Pin Present
#define SYSCTL_DC3_PWM2         0x00000004  // PWM2 Pin Present
#define SYSCTL_DC3_PWM1         0x00000002  // PWM1 Pin Present
#define SYSCTL_DC3_PWM0         0x00000001  // PWM0 Pin Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC4 register.
//
//*****************************************************************************
#define SYSCTL_DC4_EPHY0        0x40000000  // Ethernet PHY Layer 0 Present
#define SYSCTL_DC4_EMAC0        0x10000000  // Ethernet MAC Layer 0 Present
#define SYSCTL_DC4_E1588        0x01000000  // 1588 Capable
#define SYSCTL_DC4_PICAL        0x00040000  // PIOSC Calibrate
#define SYSCTL_DC4_CCP7         0x00008000  // T3CCP1 Pin Present
#define SYSCTL_DC4_CCP6         0x00004000  // T3CCP0 Pin Present
#define SYSCTL_DC4_UDMA         0x00002000  // Micro-DMA Module Present
#define SYSCTL_DC4_ROM          0x00001000  // Internal Code ROM Present
#define SYSCTL_DC4_GPIOJ        0x00000100  // GPIO Port J Present
#define SYSCTL_DC4_GPIOH        0x00000080  // GPIO Port H Present
#define SYSCTL_DC4_GPIOG        0x00000040  // GPIO Port G Present
#define SYSCTL_DC4_GPIOF        0x00000020  // GPIO Port F Present
#define SYSCTL_DC4_GPIOE        0x00000010  // GPIO Port E Present
#define SYSCTL_DC4_GPIOD        0x00000008  // GPIO Port D Present
#define SYSCTL_DC4_GPIOC        0x00000004  // GPIO Port C Present
#define SYSCTL_DC4_GPIOB        0x00000002  // GPIO Port B Present
#define SYSCTL_DC4_GPIOA        0x00000001  // GPIO Port A Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC5 register.
//
//*****************************************************************************
#define SYSCTL_DC5_PWMFAULT3    0x08000000  // PWM Fault 3 Pin Present
#define SYSCTL_DC5_PWMFAULT2    0x04000000  // PWM Fault 2 Pin Present
#define SYSCTL_DC5_PWMFAULT1    0x02000000  // PWM Fault 1 Pin Present
#define SYSCTL_DC5_PWMFAULT0    0x01000000  // PWM Fault 0 Pin Present
#define SYSCTL_DC5_PWMEFLT      0x00200000  // PWM Extended Fault Active
#define SYSCTL_DC5_PWMESYNC     0x00100000  // PWM Extended SYNC Active
#define SYSCTL_DC5_PWM7         0x00000080  // PWM7 Pin Present
#define SYSCTL_DC5_PWM6         0x00000040  // PWM6 Pin Present
#define SYSCTL_DC5_PWM5         0x00000020  // PWM5 Pin Present
#define SYSCTL_DC5_PWM4         0x00000010  // PWM4 Pin Present
#define SYSCTL_DC5_PWM3         0x00000008  // PWM3 Pin Present
#define SYSCTL_DC5_PWM2         0x00000004  // PWM2 Pin Present
#define SYSCTL_DC5_PWM1         0x00000002  // PWM1 Pin Present
#define SYSCTL_DC5_PWM0         0x00000001  // PWM0 Pin Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC6 register.
//
//*****************************************************************************
#define SYSCTL_DC6_USB0PHY      0x00000010  // USB Module 0 PHY Present
#define SYSCTL_DC6_USB0_M       0x00000003  // USB Module 0 Present
#define SYSCTL_DC6_USB0_DEV     0x00000001  // USB0 is Device Only
#define SYSCTL_DC6_USB0_HOSTDEV 0x00000002  // USB is Device or Host
#define SYSCTL_DC6_USB0_OTG     0x00000003  // USB0 is OTG

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC7 register.
//
//*****************************************************************************
#define SYSCTL_DC7_DMACH30      0x40000000  // DMA Channel 30
#define SYSCTL_DC7_DMACH29      0x20000000  // DMA Channel 29
#define SYSCTL_DC7_DMACH28      0x10000000  // DMA Channel 28
#define SYSCTL_DC7_DMACH27      0x08000000  // DMA Channel 27
#define SYSCTL_DC7_DMACH26      0x04000000  // DMA Channel 26
#define SYSCTL_DC7_DMACH25      0x02000000  // DMA Channel 25
#define SYSCTL_DC7_DMACH24      0x01000000  // DMA Channel 24
#define SYSCTL_DC7_DMACH23      0x00800000  // DMA Channel 23
#define SYSCTL_DC7_DMACH22      0x00400000  // DMA Channel 22
#define SYSCTL_DC7_DMACH21      0x00200000  // DMA Channel 21
#define SYSCTL_DC7_DMACH20      0x00100000  // DMA Channel 20
#define SYSCTL_DC7_DMACH19      0x00080000  // DMA Channel 19
#define SYSCTL_DC7_DMACH18      0x00040000  // DMA Channel 18
#define SYSCTL_DC7_DMACH17      0x00020000  // DMA Channel 17
#define SYSCTL_DC7_DMACH16      0x00010000  // DMA Channel 16
#define SYSCTL_DC7_DMACH15      0x00008000  // DMA Channel 15
#define SYSCTL_DC7_DMACH14      0x00004000  // DMA Channel 14
#define SYSCTL_DC7_DMACH13      0x00002000  // DMA Channel 13
#define SYSCTL_DC7_DMACH12      0x00001000  // DMA Channel 12
#define SYSCTL_DC7_DMACH11      0x00000800  // DMA Channel 11
#define SYSCTL_DC7_DMACH10      0x00000400  // DMA Channel 10
#define SYSCTL_DC7_DMACH9       0x00000200  // DMA Channel 9
#define SYSCTL_DC7_DMACH8       0x00000100  // DMA Channel 8
#define SYSCTL_DC7_DMACH7       0x00000080  // DMA Channel 7
#define SYSCTL_DC7_DMACH6       0x00000040  // DMA Channel 6
#define SYSCTL_DC7_DMACH5       0x00000020  // DMA Channel 5
#define SYSCTL_DC7_DMACH4       0x00000010  // DMA Channel 4
#define SYSCTL_DC7_DMACH3       0x00000008  // DMA Channel 3
#define SYSCTL_DC7_DMACH2       0x00000004  // DMA Channel 2
#define SYSCTL_DC7_DMACH1       0x00000002  // DMA Channel 1
#define SYSCTL_DC7_DMACH0       0x00000001  // DMA Channel 0

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC8 register.
//
//*****************************************************************************
#define SYSCTL_DC8_ADC1AIN15    0x80000000  // ADC Module 1 AIN15 Pin Present
#define SYSCTL_DC8_ADC1AIN14    0x40000000  // ADC Module 1 AIN14 Pin Present
#define SYSCTL_DC8_ADC1AIN13    0x20000000  // ADC Module 1 AIN13 Pin Present
#define SYSCTL_DC8_ADC1AIN12    0x10000000  // ADC Module 1 AIN12 Pin Present
#define SYSCTL_DC8_ADC1AIN11    0x08000000  // ADC Module 1 AIN11 Pin Present
#define SYSCTL_DC8_ADC1AIN10    0x04000000  // ADC Module 1 AIN10 Pin Present
#define SYSCTL_DC8_ADC1AIN9     0x02000000  // ADC Module 1 AIN9 Pin Present
#define SYSCTL_DC8_ADC1AIN8     0x01000000  // ADC Module 1 AIN8 Pin Present
#define SYSCTL_DC8_ADC1AIN7     0x00800000  // ADC Module 1 AIN7 Pin Present
#define SYSCTL_DC8_ADC1AIN6     0x00400000  // ADC Module 1 AIN6 Pin Present
#define SYSCTL_DC8_ADC1AIN5     0x00200000  // ADC Module 1 AIN5 Pin Present
#define SYSCTL_DC8_ADC1AIN4     0x00100000  // ADC Module 1 AIN4 Pin Present
#define SYSCTL_DC8_ADC1AIN3     0x00080000  // ADC Module 1 AIN3 Pin Present
#define SYSCTL_DC8_ADC1AIN2     0x00040000  // ADC Module 1 AIN2 Pin Present
#define SYSCTL_DC8_ADC1AIN1     0x00020000  // ADC Module 1 AIN1 Pin Present
#define SYSCTL_DC8_ADC1AIN0     0x00010000  // ADC Module 1 AIN0 Pin Present
#define SYSCTL_DC8_ADC0AIN15    0x00008000  // ADC Module 0 AIN15 Pin Present
#define SYSCTL_DC8_ADC0AIN14    0x00004000  // ADC Module 0 AIN14 Pin Present
#define SYSCTL_DC8_ADC0AIN13    0x00002000  // ADC Module 0 AIN13 Pin Present
#define SYSCTL_DC8_ADC0AIN12    0x00001000  // ADC Module 0 AIN12 Pin Present
#define SYSCTL_DC8_ADC0AIN11    0x00000800  // ADC Module 0 AIN11 Pin Present
#define SYSCTL_DC8_ADC0AIN10    0x00000400  // ADC Module 0 AIN10 Pin Present
#define SYSCTL_DC8_ADC0AIN9     0x00000200  // ADC Module 0 AIN9 Pin Present
#define SYSCTL_DC8_ADC0AIN8     0x00000100  // ADC Module 0 AIN8 Pin Present
#define SYSCTL_DC8_ADC0AIN7     0x00000080  // ADC Module 0 AIN7 Pin Present
#define SYSCTL_DC8_ADC0AIN6     0x00000040  // ADC Module 0 AIN6 Pin Present
#define SYSCTL_DC8_ADC0AIN5     0x00000020  // ADC Module 0 AIN5 Pin Present
#define SYSCTL_DC8_ADC0AIN4     0x00000010  // ADC Module 0 AIN4 Pin Present
#define SYSCTL_DC8_ADC0AIN3     0x00000008  // ADC Module 0 AIN3 Pin Present
#define SYSCTL_DC8_ADC0AIN2     0x00000004  // ADC Module 0 AIN2 Pin Present
#define SYSCTL_DC8_ADC0AIN1     0x00000002  // ADC Module 0 AIN1 Pin Present
#define SYSCTL_DC8_ADC0AIN0     0x00000001  // ADC Module 0 AIN0 Pin Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PBORCTL register.
//
//*****************************************************************************
#define SYSCTL_PBORCTL_BOR0     0x00000004  // VDD under BOR0 Event Action
#define SYSCTL_PBORCTL_BOR1     0x00000002  // VDD under BOR1 Event Action

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR0 register.
//
//*****************************************************************************
#define SYSCTL_SRCR0_WDT1       0x10000000  // WDT1 Reset Control
#define SYSCTL_SRCR0_CAN0       0x01000000  // CAN0 Reset Control
#define SYSCTL_SRCR0_ADC1       0x00020000  // ADC1 Reset Control
#define SYSCTL_SRCR0_ADC0       0x00010000  // ADC0 Reset Control
#define SYSCTL_SRCR0_WDT0       0x00000008  // WDT0 Reset Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR1 register.
//
//*****************************************************************************
#define SYSCTL_SRCR1_COMP1      0x02000000  // Analog Comp 1 Reset Control
#define SYSCTL_SRCR1_COMP0      0x01000000  // Analog Comp 0 Reset Control
#define SYSCTL_SRCR1_TIMER3     0x00080000  // Timer 3 Reset Control
#define SYSCTL_SRCR1_TIMER2     0x00040000  // Timer 2 Reset Control
#define SYSCTL_SRCR1_TIMER1     0x00020000  // Timer 1 Reset Control
#define SYSCTL_SRCR1_TIMER0     0x00010000  // Timer 0 Reset Control
#define SYSCTL_SRCR1_I2C1       0x00004000  // I2C1 Reset Control
#define SYSCTL_SRCR1_I2C0       0x00001000  // I2C0 Reset Control
#define SYSCTL_SRCR1_SSI1       0x00000020  // SSI1 Reset Control
#define SYSCTL_SRCR1_SSI0       0x00000010  // SSI0 Reset Control
#define SYSCTL_SRCR1_UART2      0x00000004  // UART2 Reset Control
#define SYSCTL_SRCR1_UART1      0x00000002  // UART1 Reset Control
#define SYSCTL_SRCR1_UART0      0x00000001  // UART0 Reset Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR2 register.
//
//*****************************************************************************
#define SYSCTL_SRCR2_UDMA       0x00002000  // Micro-DMA Reset Control
#define SYSCTL_SRCR2_GPIOG      0x00000040  // Port G Reset Control
#define SYSCTL_SRCR2_GPIOF      0x00000020  // Port F Reset Control
#define SYSCTL_SRCR2_GPIOE      0x00000010  // Port E Reset Control
#define SYSCTL_SRCR2_GPIOD      0x00000008  // Port D Reset Control
#define SYSCTL_SRCR2_GPIOC      0x00000004  // Port C Reset Control
#define SYSCTL_SRCR2_GPIOB      0x00000002  // Port B Reset Control
#define SYSCTL_SRCR2_GPIOA      0x00000001  // Port A Reset Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RIS register.
//
//*****************************************************************************
#define SYSCTL_RIS_BOR0RIS      0x00000800  // VDD under BOR0 Raw Interrupt
                                            // Status
#define SYSCTL_RIS_VDDARIS      0x00000400  // VDDA Power OK Event Raw
                                            // Interrupt Status
#define SYSCTL_RIS_MOSCPUPRIS   0x00000100  // MOSC Power Up Raw Interrupt
                                            // Status
#define SYSCTL_RIS_PLLLRIS      0x00000040  // PLL Lock Raw Interrupt Status
#define SYSCTL_RIS_MOFRIS       0x00000008  // Main Oscillator Failure Raw
                                            // Interrupt Status
#define SYSCTL_RIS_BOR1RIS      0x00000002  // VDD under BOR1 Raw Interrupt
                                            // Status

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_IMC register.
//
//*****************************************************************************
#define SYSCTL_IMC_BOR0IM       0x00000800  // VDD under BOR0 Interrupt Mask
#define SYSCTL_IMC_VDDAIM       0x00000400  // VDDA Power OK Interrupt Mask
#define SYSCTL_IMC_MOSCPUPIM    0x00000100  // MOSC Power Up Interrupt Mask
#define SYSCTL_IMC_PLLLIM       0x00000040  // PLL Lock Interrupt Mask
#define SYSCTL_IMC_MOFIM        0x00000008  // Main Oscillator Failure
                                            // Interrupt Mask
#define SYSCTL_IMC_BOR1IM       0x00000002  // VDD under BOR1 Interrupt Mask

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MISC register.
//
//*****************************************************************************
#define SYSCTL_MISC_BOR0MIS     0x00000800  // VDD under BOR0 Masked Interrupt
                                            // Status
#define SYSCTL_MISC_VDDAMIS     0x00000400  // VDDA Power OK Masked Interrupt
                                            // Status
#define SYSCTL_MISC_MOSCPUPMIS  0x00000100  // MOSC Power Up Masked Interrupt
                                            // Status
#define SYSCTL_MISC_PLLLMIS     0x00000040  // PLL Lock Masked Interrupt Status
#define SYSCTL_MISC_MOFMIS      0x00000008  // Main Oscillator Failure Masked
                                            // Interrupt Status
#define SYSCTL_MISC_BOR1MIS     0x00000002  // VDD under BOR1 Masked Interrupt
                                            // Status

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RESC register.
//
//*****************************************************************************
#define SYSCTL_RESC_MOSCFAIL    0x00010000  // MOSC Failure Reset
#define SYSCTL_RESC_WDT1        0x00000020  // Watchdog Timer 1 Reset
#define SYSCTL_RESC_SW          0x00000010  // Software Reset
#define SYSCTL_RESC_WDT0        0x00000008  // Watchdog Timer 0 Reset
#define SYSCTL_RESC_BOR         0x00000004  // Brown-Out Reset
#define SYSCTL_RESC_POR         0x00000002  // Power-On Reset
#define SYSCTL_RESC_EXT         0x00000001  // External Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCC register.
//
//*****************************************************************************
#define SYSCTL_RCC_ACG          0x08000000  // Auto Clock Gating
#define SYSCTL_RCC_SYSDIV_M     0x07800000  // System Clock Divisor
#define SYSCTL_RCC_USESYSDIV    0x00400000  // Enable System Clock Divider
#define SYSCTL_RCC_PWRDN        0x00002000  // PLL Power Down
#define SYSCTL_RCC_BYPASS       0x00000800  // PLL Bypass
#define SYSCTL_RCC_XTAL_M       0x000007C0  // Crystal Value
#define SYSCTL_RCC_XTAL_4MHZ    0x00000180  // 4 MHz
#define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0  // 4.096 MHz
#define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200  // 4.9152 MHz
#define SYSCTL_RCC_XTAL_5MHZ    0x00000240  // 5 MHz
#define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280  // 5.12 MHz
#define SYSCTL_RCC_XTAL_6MHZ    0x000002C0  // 6 MHz
#define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300  // 6.144 MHz
#define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340  // 7.3728 MHz
#define SYSCTL_RCC_XTAL_8MHZ    0x00000380  // 8 MHz
#define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0  // 8.192 MHz
#define SYSCTL_RCC_XTAL_10MHZ   0x00000400  // 10 MHz
#define SYSCTL_RCC_XTAL_12MHZ   0x00000440  // 12 MHz
#define SYSCTL_RCC_XTAL_12_2MHZ 0x00000480  // 12.288 MHz
#define SYSCTL_RCC_XTAL_13_5MHZ 0x000004C0  // 13.56 MHz
#define SYSCTL_RCC_XTAL_14_3MHZ 0x00000500  // 14.31818 MHz
#define SYSCTL_RCC_XTAL_16MHZ   0x00000540  // 16 MHz
#define SYSCTL_RCC_XTAL_16_3MHZ 0x00000580  // 16.384 MHz
#define SYSCTL_RCC_XTAL_18MHZ   0x000005C0  // 18.0 MHz (USB)
#define SYSCTL_RCC_XTAL_20MHZ   0x00000600  // 20.0 MHz (USB)
#define SYSCTL_RCC_XTAL_24MHZ   0x00000640  // 24.0 MHz (USB)
#define SYSCTL_RCC_XTAL_25MHZ   0x00000680  // 25.0 MHz (USB)
#define SYSCTL_RCC_OSCSRC_M     0x00000030  // Oscillator Source
#define SYSCTL_RCC_OSCSRC_MAIN  0x00000000  // MOSC
#define SYSCTL_RCC_OSCSRC_INT   0x00000010  // IOSC
#define SYSCTL_RCC_OSCSRC_INT4  0x00000020  // IOSC/4
#define SYSCTL_RCC_OSCSRC_30    0x00000030  // LFIOSC
#define SYSCTL_RCC_MOSCDIS      0x00000001  // Main Oscillator Disable
#define SYSCTL_RCC_SYSDIV_S     23

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_GPIOHBCTL
// register.
//
//*****************************************************************************
#define SYSCTL_GPIOHBCTL_PORTG  0x00000040  // Port G Advanced High-Performance
                                            // Bus
#define SYSCTL_GPIOHBCTL_PORTF  0x00000020  // Port F Advanced High-Performance
                                            // Bus
#define SYSCTL_GPIOHBCTL_PORTE  0x00000010  // Port E Advanced High-Performance
                                            // Bus
#define SYSCTL_GPIOHBCTL_PORTD  0x00000008  // Port D Advanced High-Performance
                                            // Bus
#define SYSCTL_GPIOHBCTL_PORTC  0x00000004  // Port C Advanced High-Performance
                                            // Bus
#define SYSCTL_GPIOHBCTL_PORTB  0x00000002  // Port B Advanced High-Performance
                                            // Bus
#define SYSCTL_GPIOHBCTL_PORTA  0x00000001  // Port A Advanced High-Performance
                                            // Bus

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCC2 register.
//
//*****************************************************************************
#define SYSCTL_RCC2_USERCC2     0x80000000  // Use RCC2
#define SYSCTL_RCC2_DIV400      0x40000000  // Divide PLL as 400 MHz vs. 200
                                            // MHz
#define SYSCTL_RCC2_SYSDIV2_M   0x1F800000  // System Clock Divisor 2
#define SYSCTL_RCC2_SYSDIV2LSB  0x00400000  // Additional LSB for SYSDIV2
#define SYSCTL_RCC2_PWRDN2      0x00002000  // Power-Down PLL 2
#define SYSCTL_RCC2_BYPASS2     0x00000800  // PLL Bypass 2
#define SYSCTL_RCC2_OSCSRC2_M   0x00000070  // Oscillator Source 2
#define SYSCTL_RCC2_OSCSRC2_MO  0x00000000  // MOSC
#define SYSCTL_RCC2_OSCSRC2_IO  0x00000010  // PIOSC
#define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020  // PIOSC/4
#define SYSCTL_RCC2_OSCSRC2_30  0x00000030  // LFIOSC
#define SYSCTL_RCC2_SYSDIV2_S   23

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MOSCCTL register.
//
//*****************************************************************************
#define SYSCTL_MOSCCTL_NOXTAL   0x00000004  // No Crystal Connected
#define SYSCTL_MOSCCTL_MOSCIM   0x00000002  // MOSC Failure Action
#define SYSCTL_MOSCCTL_CVAL     0x00000001  // Clock Validation for MOSC

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC0 register.
//
//*****************************************************************************
#define SYSCTL_RCGC0_WDT1       0x10000000  // WDT1 Clock Gating Control
#define SYSCTL_RCGC0_CAN0       0x01000000  // CAN0 Clock Gating Control
#define SYSCTL_RCGC0_ADC1       0x00020000  // ADC1 Clock Gating Control
#define SYSCTL_RCGC0_ADC0       0x00010000  // ADC0 Clock Gating Control
#define SYSCTL_RCGC0_ADC1SPD_M  0x00000C00  // ADC1 Sample Speed
#define SYSCTL_RCGC0_ADC1SPD_125K                                             \
                                0x00000000  // 125K samples/second
#define SYSCTL_RCGC0_ADC1SPD_250K                                             \
                                0x00000400  // 250K samples/second
#define SYSCTL_RCGC0_ADC1SPD_500K                                             \
                                0x00000800  // 500K samples/second
#define SYSCTL_RCGC0_ADC1SPD_1M 0x00000C00  // 1M samples/second
#define SYSCTL_RCGC0_ADC0SPD_M  0x00000300  // ADC0 Sample Speed
#define SYSCTL_RCGC0_ADC0SPD_125K                                             \
                                0x00000000  // 125K samples/second
#define SYSCTL_RCGC0_ADC0SPD_250K                                             \
                                0x00000100  // 250K samples/second
#define SYSCTL_RCGC0_ADC0SPD_500K                                             \
                                0x00000200  // 500K samples/second
#define SYSCTL_RCGC0_ADC0SPD_1M 0x00000300  // 1M samples/second
#define SYSCTL_RCGC0_WDT0       0x00000008  // WDT0 Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC1 register.
//
//*****************************************************************************
#define SYSCTL_RCGC1_COMP1      0x02000000  // Analog Comparator 1 Clock Gating
#define SYSCTL_RCGC1_COMP0      0x01000000  // Analog Comparator 0 Clock Gating
#define SYSCTL_RCGC1_TIMER3     0x00080000  // Timer 3 Clock Gating Control
#define SYSCTL_RCGC1_TIMER2     0x00040000  // Timer 2 Clock Gating Control
#define SYSCTL_RCGC1_TIMER1     0x00020000  // Timer 1 Clock Gating Control
#define SYSCTL_RCGC1_TIMER0     0x00010000  // Timer 0 Clock Gating Control
#define SYSCTL_RCGC1_I2C1       0x00004000  // I2C1 Clock Gating Control
#define SYSCTL_RCGC1_I2C0       0x00001000  // I2C0 Clock Gating Control
#define SYSCTL_RCGC1_SSI1       0x00000020  // SSI1 Clock Gating Control
#define SYSCTL_RCGC1_SSI0       0x00000010  // SSI0 Clock Gating Control
#define SYSCTL_RCGC1_UART2      0x00000004  // UART2 Clock Gating Control
#define SYSCTL_RCGC1_UART1      0x00000002  // UART1 Clock Gating Control
#define SYSCTL_RCGC1_UART0      0x00000001  // UART0 Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC2 register.
//
//*****************************************************************************
#define SYSCTL_RCGC2_UDMA       0x00002000  // Micro-DMA Clock Gating Control
#define SYSCTL_RCGC2_GPIOG      0x00000040  // Port G Clock Gating Control
#define SYSCTL_RCGC2_GPIOF      0x00000020  // Port F Clock Gating Control
#define SYSCTL_RCGC2_GPIOE      0x00000010  // Port E Clock Gating Control
#define SYSCTL_RCGC2_GPIOD      0x00000008  // Port D Clock Gating Control
#define SYSCTL_RCGC2_GPIOC      0x00000004  // Port C Clock Gating Control
#define SYSCTL_RCGC2_GPIOB      0x00000002  // Port B Clock Gating Control
#define SYSCTL_RCGC2_GPIOA      0x00000001  // Port A Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC0 register.
//
//*****************************************************************************
#define SYSCTL_SCGC0_WDT1       0x10000000  // WDT1 Clock Gating Control
#define SYSCTL_SCGC0_CAN0       0x01000000  // CAN0 Clock Gating Control
#define SYSCTL_SCGC0_ADC1       0x00020000  // ADC1 Clock Gating Control
#define SYSCTL_SCGC0_ADC0       0x00010000  // ADC0 Clock Gating Control
#define SYSCTL_SCGC0_WDT0       0x00000008  // WDT0 Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC1 register.
//
//*****************************************************************************
#define SYSCTL_SCGC1_COMP1      0x02000000  // Analog Comparator 1 Clock Gating
#define SYSCTL_SCGC1_COMP0      0x01000000  // Analog Comparator 0 Clock Gating
#define SYSCTL_SCGC1_TIMER3     0x00080000  // Timer 3 Clock Gating Control
#define SYSCTL_SCGC1_TIMER2     0x00040000  // Timer 2 Clock Gating Control
#define SYSCTL_SCGC1_TIMER1     0x00020000  // Timer 1 Clock Gating Control
#define SYSCTL_SCGC1_TIMER0     0x00010000  // Timer 0 Clock Gating Control
#define SYSCTL_SCGC1_I2C1       0x00004000  // I2C1 Clock Gating Control
#define SYSCTL_SCGC1_I2C0       0x00001000  // I2C0 Clock Gating Control
#define SYSCTL_SCGC1_SSI1       0x00000020  // SSI1 Clock Gating Control
#define SYSCTL_SCGC1_SSI0       0x00000010  // SSI0 Clock Gating Control
#define SYSCTL_SCGC1_UART2      0x00000004  // UART2 Clock Gating Control
#define SYSCTL_SCGC1_UART1      0x00000002  // UART1 Clock Gating Control
#define SYSCTL_SCGC1_UART0      0x00000001  // UART0 Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC2 register.
//
//*****************************************************************************
#define SYSCTL_SCGC2_UDMA       0x00002000  // Micro-DMA Clock Gating Control
#define SYSCTL_SCGC2_GPIOG      0x00000040  // Port G Clock Gating Control
#define SYSCTL_SCGC2_GPIOF      0x00000020  // Port F Clock Gating Control
#define SYSCTL_SCGC2_GPIOE      0x00000010  // Port E Clock Gating Control
#define SYSCTL_SCGC2_GPIOD      0x00000008  // Port D Clock Gating Control
#define SYSCTL_SCGC2_GPIOC      0x00000004  // Port C Clock Gating Control
#define SYSCTL_SCGC2_GPIOB      0x00000002  // Port B Clock Gating Control
#define SYSCTL_SCGC2_GPIOA      0x00000001  // Port A Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC0 register.
//
//*****************************************************************************
#define SYSCTL_DCGC0_WDT1       0x10000000  // WDT1 Clock Gating Control
#define SYSCTL_DCGC0_CAN0       0x01000000  // CAN0 Clock Gating Control
#define SYSCTL_DCGC0_ADC1       0x00020000  // ADC1 Clock Gating Control
#define SYSCTL_DCGC0_ADC0       0x00010000  // ADC0 Clock Gating Control
#define SYSCTL_DCGC0_WDT0       0x00000008  // WDT0 Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC1 register.
//
//*****************************************************************************
#define SYSCTL_DCGC1_COMP1      0x02000000  // Analog Comparator 1 Clock Gating
#define SYSCTL_DCGC1_COMP0      0x01000000  // Analog Comparator 0 Clock Gating
#define SYSCTL_DCGC1_TIMER3     0x00080000  // Timer 3 Clock Gating Control
#define SYSCTL_DCGC1_TIMER2     0x00040000  // Timer 2 Clock Gating Control
#define SYSCTL_DCGC1_TIMER1     0x00020000  // Timer 1 Clock Gating Control
#define SYSCTL_DCGC1_TIMER0     0x00010000  // Timer 0 Clock Gating Control
#define SYSCTL_DCGC1_I2C1       0x00004000  // I2C1 Clock Gating Control
#define SYSCTL_DCGC1_I2C0       0x00001000  // I2C0 Clock Gating Control
#define SYSCTL_DCGC1_SSI1       0x00000020  // SSI1 Clock Gating Control
#define SYSCTL_DCGC1_SSI0       0x00000010  // SSI0 Clock Gating Control
#define SYSCTL_DCGC1_UART2      0x00000004  // UART2 Clock Gating Control
#define SYSCTL_DCGC1_UART1      0x00000002  // UART1 Clock Gating Control
#define SYSCTL_DCGC1_UART0      0x00000001  // UART0 Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC2 register.
//
//*****************************************************************************
#define SYSCTL_DCGC2_UDMA       0x00002000  // Micro-DMA Clock Gating Control
#define SYSCTL_DCGC2_GPIOG      0x00000040  // Port G Clock Gating Control
#define SYSCTL_DCGC2_GPIOF      0x00000020  // Port F Clock Gating Control
#define SYSCTL_DCGC2_GPIOE      0x00000010  // Port E Clock Gating Control
#define SYSCTL_DCGC2_GPIOD      0x00000008  // Port D Clock Gating Control
#define SYSCTL_DCGC2_GPIOC      0x00000004  // Port C Clock Gating Control
#define SYSCTL_DCGC2_GPIOB      0x00000002  // Port B Clock Gating Control
#define SYSCTL_DCGC2_GPIOA      0x00000001  // Port A Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG
// register.
//
//*****************************************************************************
#define SYSCTL_DSLPCLKCFG_D_M   0x1F800000  // Divider Field Override
#define SYSCTL_DSLPCLKCFG_O_M   0x00000070  // Clock Source
#define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000  // MOSC
#define SYSCTL_DSLPCLKCFG_O_IO  0x00000010  // PIOSC
#define SYSCTL_DSLPCLKCFG_O_30  0x00000030  // LFIOSC
#define SYSCTL_DSLPCLKCFG_PIOSCPD                                             \
                                0x00000002  // PIOSC Power Down Request
#define SYSCTL_DSLPCLKCFG_D_S   23

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SYSPROP register.
//
//*****************************************************************************
#define SYSCTL_SYSPROP_FPU      0x00000001  // FPU Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PIOSCCAL
// register.
//
//*****************************************************************************
#define SYSCTL_PIOSCCAL_UTEN    0x80000000  // Use User Trim Value
#define SYSCTL_PIOSCCAL_UPDATE  0x00000100  // Update Trim
#define SYSCTL_PIOSCCAL_UT_M    0x0000007F  // User Trim Value
#define SYSCTL_PIOSCCAL_UT_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLFREQ0
// register.
//
//*****************************************************************************
#define SYSCTL_PLLFREQ0_MFRAC_M 0x000FFC00  // PLL M Fractional Value
#define SYSCTL_PLLFREQ0_MINT_M  0x000003FF  // PLL M Integer Value
#define SYSCTL_PLLFREQ0_MFRAC_S 10
#define SYSCTL_PLLFREQ0_MINT_S  0

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLFREQ1
// register.
//
//*****************************************************************************
#define SYSCTL_PLLFREQ1_Q_M     0x00001F00  // PLL Q Value
#define SYSCTL_PLLFREQ1_N_M     0x0000001F  // PLL N Value
#define SYSCTL_PLLFREQ1_Q_S     8
#define SYSCTL_PLLFREQ1_N_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLSTAT register.
//
//*****************************************************************************
#define SYSCTL_PLLSTAT_LOCK     0x00000001  // PLL Lock

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SLPPWRCFG
// register.
//
//*****************************************************************************
#define SYSCTL_SLPPWRCFG_FLASHPM_M                                            \
                                0x00000030  // Flash Power Modes
#define SYSCTL_SLPPWRCFG_FLASHPM_NRM                                          \
                                0x00000000  // Active Mode
#define SYSCTL_SLPPWRCFG_FLASHPM_SLP                                          \
                                0x00000020  // Low Power Mode
#define SYSCTL_SLPPWRCFG_SRAMPM_M                                             \
                                0x00000003  // SRAM Power Modes
#define SYSCTL_SLPPWRCFG_SRAMPM_NRM                                           \
                                0x00000000  // Active Mode
#define SYSCTL_SLPPWRCFG_SRAMPM_SBY                                           \
                                0x00000001  // Standby Mode
#define SYSCTL_SLPPWRCFG_SRAMPM_LP                                            \
                                0x00000003  // Low Power Mode

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DSLPPWRCFG
// register.
//
//*****************************************************************************
#define SYSCTL_DSLPPWRCFG_FLASHPM_M                                           \
                                0x00000030  // Flash Power Modes
#define SYSCTL_DSLPPWRCFG_FLASHPM_NRM                                         \
                                0x00000000  // Active Mode
#define SYSCTL_DSLPPWRCFG_FLASHPM_SLP                                         \
                                0x00000020  // Low Power Mode
#define SYSCTL_DSLPPWRCFG_SRAMPM_M                                            \
                                0x00000003  // SRAM Power Modes
#define SYSCTL_DSLPPWRCFG_SRAMPM_NRM                                          \
                                0x00000000  // Active Mode
#define SYSCTL_DSLPPWRCFG_SRAMPM_SBY                                          \
                                0x00000001  // Standby Mode
#define SYSCTL_DSLPPWRCFG_SRAMPM_LP                                           \
                                0x00000003  // Low Power Mode

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC9 register.
//
//*****************************************************************************
#define SYSCTL_DC9_ADC1DC7      0x00800000  // ADC1 DC7 Present
#define SYSCTL_DC9_ADC1DC6      0x00400000  // ADC1 DC6 Present
#define SYSCTL_DC9_ADC1DC5      0x00200000  // ADC1 DC5 Present
#define SYSCTL_DC9_ADC1DC4      0x00100000  // ADC1 DC4 Present
#define SYSCTL_DC9_ADC1DC3      0x00080000  // ADC1 DC3 Present
#define SYSCTL_DC9_ADC1DC2      0x00040000  // ADC1 DC2 Present
#define SYSCTL_DC9_ADC1DC1      0x00020000  // ADC1 DC1 Present
#define SYSCTL_DC9_ADC1DC0      0x00010000  // ADC1 DC0 Present
#define SYSCTL_DC9_ADC0DC7      0x00000080  // ADC0 DC7 Present
#define SYSCTL_DC9_ADC0DC6      0x00000040  // ADC0 DC6 Present
#define SYSCTL_DC9_ADC0DC5      0x00000020  // ADC0 DC5 Present
#define SYSCTL_DC9_ADC0DC4      0x00000010  // ADC0 DC4 Present
#define SYSCTL_DC9_ADC0DC3      0x00000008  // ADC0 DC3 Present
#define SYSCTL_DC9_ADC0DC2      0x00000004  // ADC0 DC2 Present
#define SYSCTL_DC9_ADC0DC1      0x00000002  // ADC0 DC1 Present
#define SYSCTL_DC9_ADC0DC0      0x00000001  // ADC0 DC0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_NVMSTAT register.
//
//*****************************************************************************
#define SYSCTL_NVMSTAT_FWB      0x00000001  // 32 Word Flash Write Buffer
                                            // Available

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_LDOSPCTL
// register.
//
//*****************************************************************************
#define SYSCTL_LDOSPCTL_VADJEN  0x80000000  // Voltage Adjust Enable
#define SYSCTL_LDOSPCTL_VLDO_M  0x000000FF  // LDO Output Voltage
#define SYSCTL_LDOSPCTL_VLDO_0_90V                                            \
                                0x00000012  // 0.90 V
#define SYSCTL_LDOSPCTL_VLDO_0_95V                                            \
                                0x00000013  // 0.95 V
#define SYSCTL_LDOSPCTL_VLDO_1_00V                                            \
                                0x00000014  // 1.00 V
#define SYSCTL_LDOSPCTL_VLDO_1_05V                                            \
                                0x00000015  // 1.05 V
#define SYSCTL_LDOSPCTL_VLDO_1_10V                                            \
                                0x00000016  // 1.10 V
#define SYSCTL_LDOSPCTL_VLDO_1_15V                                            \
                                0x00000017  // 1.15 V
#define SYSCTL_LDOSPCTL_VLDO_1_20V                                            \
                                0x00000018  // 1.20 V

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_LDODPCTL
// register.
//
//*****************************************************************************
#define SYSCTL_LDODPCTL_VADJEN  0x80000000  // Voltage Adjust Enable
#define SYSCTL_LDODPCTL_VLDO_M  0x000000FF  // LDO Output Voltage
#define SYSCTL_LDODPCTL_VLDO_0_90V                                            \
                                0x00000012  // 0.90 V
#define SYSCTL_LDODPCTL_VLDO_0_95V                                            \
                                0x00000013  // 0.95 V
#define SYSCTL_LDODPCTL_VLDO_1_00V                                            \
                                0x00000014  // 1.00 V
#define SYSCTL_LDODPCTL_VLDO_1_05V                                            \
                                0x00000015  // 1.05 V
#define SYSCTL_LDODPCTL_VLDO_1_10V                                            \
                                0x00000016  // 1.10 V
#define SYSCTL_LDODPCTL_VLDO_1_15V                                            \
                                0x00000017  // 1.15 V
#define SYSCTL_LDODPCTL_VLDO_1_20V                                            \
                                0x00000018  // 1.20 V

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPWD register.
//
//*****************************************************************************
#define SYSCTL_PPWD_P1          0x00000002  // Watchdog Timer 1 Present
#define SYSCTL_PPWD_P0          0x00000001  // Watchdog Timer 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPTIMER register.
//
//*****************************************************************************
#define SYSCTL_PPTIMER_P5       0x00000020  // 16/32-Bit General-Purpose Timer
                                            // 5 Present
#define SYSCTL_PPTIMER_P4       0x00000010  // 16/32-Bit General-Purpose Timer
                                            // 4 Present
#define SYSCTL_PPTIMER_P3       0x00000008  // 16/32-Bit General-Purpose Timer
                                            // 3 Present
#define SYSCTL_PPTIMER_P2       0x00000004  // 16/32-Bit General-Purpose Timer
                                            // 2 Present
#define SYSCTL_PPTIMER_P1       0x00000002  // 16/32-Bit General-Purpose Timer
                                            // 1 Present
#define SYSCTL_PPTIMER_P0       0x00000001  // 16/32-Bit General-Purpose Timer
                                            // 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPGPIO register.
//
//*****************************************************************************
#define SYSCTL_PPGPIO_P14       0x00004000  // GPIO Port Q Present
#define SYSCTL_PPGPIO_P13       0x00002000  // GPIO Port P Present
#define SYSCTL_PPGPIO_P12       0x00001000  // GPIO Port N Present
#define SYSCTL_PPGPIO_P11       0x00000800  // GPIO Port M Present
#define SYSCTL_PPGPIO_P10       0x00000400  // GPIO Port L Present
#define SYSCTL_PPGPIO_P9        0x00000200  // GPIO Port K Present
#define SYSCTL_PPGPIO_P8        0x00000100  // GPIO Port J Present
#define SYSCTL_PPGPIO_P7        0x00000080  // GPIO Port H Present
#define SYSCTL_PPGPIO_P6        0x00000040  // GPIO Port G Present
#define SYSCTL_PPGPIO_P5        0x00000020  // GPIO Port F Present
#define SYSCTL_PPGPIO_P4        0x00000010  // GPIO Port E Present
#define SYSCTL_PPGPIO_P3        0x00000008  // GPIO Port D Present
#define SYSCTL_PPGPIO_P2        0x00000004  // GPIO Port C Present
#define SYSCTL_PPGPIO_P1        0x00000002  // GPIO Port B Present
#define SYSCTL_PPGPIO_P0        0x00000001  // GPIO Port A Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPDMA register.
//
//*****************************************************************************
#define SYSCTL_PPDMA_P0         0x00000001  // uDMA Module Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPHIB register.
//
//*****************************************************************************
#define SYSCTL_PPHIB_P0         0x00000001  // Hibernation Module Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPUART register.
//
//*****************************************************************************
#define SYSCTL_PPUART_P7        0x00000080  // UART Module 7 Present
#define SYSCTL_PPUART_P6        0x00000040  // UART Module 6 Present
#define SYSCTL_PPUART_P5        0x00000020  // UART Module 5 Present
#define SYSCTL_PPUART_P4        0x00000010  // UART Module 4 Present
#define SYSCTL_PPUART_P3        0x00000008  // UART Module 3 Present
#define SYSCTL_PPUART_P2        0x00000004  // UART Module 2 Present
#define SYSCTL_PPUART_P1        0x00000002  // UART Module 1 Present
#define SYSCTL_PPUART_P0        0x00000001  // UART Module 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPSSI register.
//
//*****************************************************************************
#define SYSCTL_PPSSI_P3         0x00000008  // SSI Module 3 Present
#define SYSCTL_PPSSI_P2         0x00000004  // SSI Module 2 Present
#define SYSCTL_PPSSI_P1         0x00000002  // SSI Module 1 Present
#define SYSCTL_PPSSI_P0         0x00000001  // SSI Module 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPI2C register.
//
//*****************************************************************************
#define SYSCTL_PPI2C_P5         0x00000020  // I2C Module 5 Present
#define SYSCTL_PPI2C_P4         0x00000010  // I2C Module 4 Present
#define SYSCTL_PPI2C_P3         0x00000008  // I2C Module 3 Present
#define SYSCTL_PPI2C_P2         0x00000004  // I2C Module 2 Present
#define SYSCTL_PPI2C_P1         0x00000002  // I2C Module 1 Present
#define SYSCTL_PPI2C_P0         0x00000001  // I2C Module 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPUSB register.
//
//*****************************************************************************
#define SYSCTL_PPUSB_P0         0x00000001  // USB Module Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPCAN register.
//
//*****************************************************************************
#define SYSCTL_PPCAN_P1         0x00000002  // CAN Module 1 Present
#define SYSCTL_PPCAN_P0         0x00000001  // CAN Module 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPADC register.
//
//*****************************************************************************
#define SYSCTL_PPADC_P1         0x00000002  // ADC Module 1 Present
#define SYSCTL_PPADC_P0         0x00000001  // ADC Module 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPACMP register.
//
//*****************************************************************************
#define SYSCTL_PPACMP_P0        0x00000001  // Analog Comparator Module Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPPWM register.
//
//*****************************************************************************
#define SYSCTL_PPPWM_P1         0x00000002  // PWM Module 1 Present
#define SYSCTL_PPPWM_P0         0x00000001  // PWM Module 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPQEI register.
//
//*****************************************************************************
#define SYSCTL_PPQEI_P1         0x00000002  // QEI Module 1 Present
#define SYSCTL_PPQEI_P0         0x00000001  // QEI Module 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_PPEEPROM_P0      0x00000001  // EEPROM Module Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_PPWTIMER_P5      0x00000020  // 32/64-Bit Wide General-Purpose
                                            // Timer 5 Present
#define SYSCTL_PPWTIMER_P4      0x00000010  // 32/64-Bit Wide General-Purpose
                                            // Timer 4 Present
#define SYSCTL_PPWTIMER_P3      0x00000008  // 32/64-Bit Wide General-Purpose
                                            // Timer 3 Present
#define SYSCTL_PPWTIMER_P2      0x00000004  // 32/64-Bit Wide General-Purpose
                                            // Timer 2 Present
#define SYSCTL_PPWTIMER_P1      0x00000002  // 32/64-Bit Wide General-Purpose
                                            // Timer 1 Present
#define SYSCTL_PPWTIMER_P0      0x00000001  // 32/64-Bit Wide General-Purpose
                                            // Timer 0 Present

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRWD register.
//
//*****************************************************************************
#define SYSCTL_SRWD_R1          0x00000002  // Watchdog Timer 1 Software Reset
#define SYSCTL_SRWD_R0          0x00000001  // Watchdog Timer 0 Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRTIMER register.
//
//*****************************************************************************
#define SYSCTL_SRTIMER_R5       0x00000020  // 16/32-Bit General-Purpose Timer
                                            // 5 Software Reset
#define SYSCTL_SRTIMER_R4       0x00000010  // 16/32-Bit General-Purpose Timer
                                            // 4 Software Reset
#define SYSCTL_SRTIMER_R3       0x00000008  // 16/32-Bit General-Purpose Timer
                                            // 3 Software Reset
#define SYSCTL_SRTIMER_R2       0x00000004  // 16/32-Bit General-Purpose Timer
                                            // 2 Software Reset
#define SYSCTL_SRTIMER_R1       0x00000002  // 16/32-Bit General-Purpose Timer
                                            // 1 Software Reset
#define SYSCTL_SRTIMER_R0       0x00000001  // 16/32-Bit General-Purpose Timer
                                            // 0 Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRGPIO register.
//
//*****************************************************************************
#define SYSCTL_SRGPIO_R6        0x00000040  // GPIO Port G Software Reset
#define SYSCTL_SRGPIO_R5        0x00000020  // GPIO Port F Software Reset
#define SYSCTL_SRGPIO_R4        0x00000010  // GPIO Port E Software Reset
#define SYSCTL_SRGPIO_R3        0x00000008  // GPIO Port D Software Reset
#define SYSCTL_SRGPIO_R2        0x00000004  // GPIO Port C Software Reset
#define SYSCTL_SRGPIO_R1        0x00000002  // GPIO Port B Software Reset
#define SYSCTL_SRGPIO_R0        0x00000001  // GPIO Port A Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRDMA register.
//
//*****************************************************************************
#define SYSCTL_SRDMA_R0         0x00000001  // uDMA Module Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRUART register.
//
//*****************************************************************************
#define SYSCTL_SRUART_R7        0x00000080  // UART Module 7 Software Reset
#define SYSCTL_SRUART_R6        0x00000040  // UART Module 6 Software Reset
#define SYSCTL_SRUART_R5        0x00000020  // UART Module 5 Software Reset
#define SYSCTL_SRUART_R4        0x00000010  // UART Module 4 Software Reset
#define SYSCTL_SRUART_R3        0x00000008  // UART Module 3 Software Reset
#define SYSCTL_SRUART_R2        0x00000004  // UART Module 2 Software Reset
#define SYSCTL_SRUART_R1        0x00000002  // UART Module 1 Software Reset
#define SYSCTL_SRUART_R0        0x00000001  // UART Module 0 Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRSSI register.
//
//*****************************************************************************
#define SYSCTL_SRSSI_R3         0x00000008  // SSI Module 3 Software Reset
#define SYSCTL_SRSSI_R2         0x00000004  // SSI Module 2 Software Reset
#define SYSCTL_SRSSI_R1         0x00000002  // SSI Module 1 Software Reset
#define SYSCTL_SRSSI_R0         0x00000001  // SSI Module 0 Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRI2C register.
//
//*****************************************************************************
#define SYSCTL_SRI2C_R5         0x00000020  // I2C Module 5 Software Reset
#define SYSCTL_SRI2C_R4         0x00000010  // I2C Module 4 Software Reset
#define SYSCTL_SRI2C_R3         0x00000008  // I2C Module 3 Software Reset
#define SYSCTL_SRI2C_R2         0x00000004  // I2C Module 2 Software Reset
#define SYSCTL_SRI2C_R1         0x00000002  // I2C Module 1 Software Reset
#define SYSCTL_SRI2C_R0         0x00000001  // I2C Module 0 Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCAN register.
//
//*****************************************************************************
#define SYSCTL_SRCAN_R0         0x00000001  // CAN Module 0 Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRADC register.
//
//*****************************************************************************
#define SYSCTL_SRADC_R1         0x00000002  // ADC Module 1 Software Reset
#define SYSCTL_SRADC_R0         0x00000001  // ADC Module 0 Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRACMP register.
//
//*****************************************************************************
#define SYSCTL_SRACMP_R0        0x00000001  // Analog Comparator Module 0
                                            // Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SREEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_SREEPROM_R0      0x00000001  // EEPROM Module Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_SRWTIMER_R5      0x00000020  // 32/64-Bit Wide General-Purpose
                                            // Timer 5 Software Reset
#define SYSCTL_SRWTIMER_R4      0x00000010  // 32/64-Bit Wide General-Purpose
                                            // Timer 4 Software Reset
#define SYSCTL_SRWTIMER_R3      0x00000008  // 32/64-Bit Wide General-Purpose
                                            // Timer 3 Software Reset
#define SYSCTL_SRWTIMER_R2      0x00000004  // 32/64-Bit Wide General-Purpose
                                            // Timer 2 Software Reset
#define SYSCTL_SRWTIMER_R1      0x00000002  // 32/64-Bit Wide General-Purpose
                                            // Timer 1 Software Reset
#define SYSCTL_SRWTIMER_R0      0x00000001  // 32/64-Bit Wide General-Purpose
                                            // Timer 0 Software Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCWD register.
//
//*****************************************************************************
#define SYSCTL_RCGCWD_R1        0x00000002  // Watchdog Timer 1 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCWD_R0        0x00000001  // Watchdog Timer 0 Run Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCTIMER_R5     0x00000020  // 16/32-Bit General-Purpose Timer
                                            // 5 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R4     0x00000010  // 16/32-Bit General-Purpose Timer
                                            // 4 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R3     0x00000008  // 16/32-Bit General-Purpose Timer
                                            // 3 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R2     0x00000004  // 16/32-Bit General-Purpose Timer
                                            // 2 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R1     0x00000002  // 16/32-Bit General-Purpose Timer
                                            // 1 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R0     0x00000001  // 16/32-Bit General-Purpose Timer
                                            // 0 Run Mode Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCGPIO_R6      0x00000040  // GPIO Port G Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCGPIO_R5      0x00000020  // GPIO Port F Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCGPIO_R4      0x00000010  // GPIO Port E Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCGPIO_R3      0x00000008  // GPIO Port D Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCGPIO_R2      0x00000004  // GPIO Port C Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCGPIO_R1      0x00000002  // GPIO Port B Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCGPIO_R0      0x00000001  // GPIO Port A Run Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_RCGCDMA_R0       0x00000001  // uDMA Module Run Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCUART_R7      0x00000080  // UART Module 7 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCUART_R6      0x00000040  // UART Module 6 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCUART_R5      0x00000020  // UART Module 5 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCUART_R4      0x00000010  // UART Module 4 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCUART_R3      0x00000008  // UART Module 3 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCUART_R2      0x00000004  // UART Module 2 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCUART_R1      0x00000002  // UART Module 1 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCUART_R0      0x00000001  // UART Module 0 Run Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_RCGCSSI_R3       0x00000008  // SSI Module 3 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCSSI_R2       0x00000004  // SSI Module 2 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCSSI_R1       0x00000002  // SSI Module 1 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCSSI_R0       0x00000001  // SSI Module 0 Run Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_RCGCI2C_R5       0x00000020  // I2C Module 5 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCI2C_R4       0x00000010  // I2C Module 4 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCI2C_R3       0x00000008  // I2C Module 3 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCI2C_R2       0x00000004  // I2C Module 2 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCI2C_R1       0x00000002  // I2C Module 1 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCI2C_R0       0x00000001  // I2C Module 0 Run Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_RCGCCAN_R0       0x00000001  // CAN Module 0 Run Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCADC register.
//
//*****************************************************************************
#define SYSCTL_RCGCADC_R1       0x00000002  // ADC Module 1 Run Mode Clock
                                            // Gating Control
#define SYSCTL_RCGCADC_R0       0x00000001  // ADC Module 0 Run Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCACMP_R0      0x00000001  // Analog Comparator Module 0 Run
                                            // Mode Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCEEPROM_R0    0x00000001  // EEPROM Module Run Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCWTIMER_R5    0x00000020  // 32/64-Bit Wide General-Purpose
                                            // Timer 5 Run Mode Clock Gating
                                            // Control
#define SYSCTL_RCGCWTIMER_R4    0x00000010  // 32/64-Bit Wide General-Purpose
                                            // Timer 4 Run Mode Clock Gating
                                            // Control
#define SYSCTL_RCGCWTIMER_R3    0x00000008  // 32/64-Bit Wide General-Purpose
                                            // Timer 3 Run Mode Clock Gating
                                            // Control
#define SYSCTL_RCGCWTIMER_R2    0x00000004  // 32/64-Bit Wide General-Purpose
                                            // Timer 2 Run Mode Clock Gating
                                            // Control
#define SYSCTL_RCGCWTIMER_R1    0x00000002  // 32/64-Bit Wide General-Purpose
                                            // Timer 1 Run Mode Clock Gating
                                            // Control
#define SYSCTL_RCGCWTIMER_R0    0x00000001  // 32/64-Bit Wide General-Purpose
                                            // Timer 0 Run Mode Clock Gating
                                            // Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCWD register.
//
//*****************************************************************************
#define SYSCTL_SCGCWD_S1        0x00000002  // Watchdog Timer 1 Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_SCGCWD_S0        0x00000001  // Watchdog Timer 0 Sleep Mode
                                            // Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCTIMER_S5     0x00000020  // 16/32-Bit General-Purpose Timer
                                            // 5 Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_SCGCTIMER_S4     0x00000010  // 16/32-Bit General-Purpose Timer
                                            // 4 Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_SCGCTIMER_S3     0x00000008  // 16/32-Bit General-Purpose Timer
                                            // 3 Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_SCGCTIMER_S2     0x00000004  // 16/32-Bit General-Purpose Timer
                                            // 2 Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_SCGCTIMER_S1     0x00000002  // 16/32-Bit General-Purpose Timer
                                            // 1 Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_SCGCTIMER_S0     0x00000001  // 16/32-Bit General-Purpose Timer
                                            // 0 Sleep Mode Clock Gating
                                            // Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCGPIO_S6      0x00000040  // GPIO Port G Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCGPIO_S5      0x00000020  // GPIO Port F Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCGPIO_S4      0x00000010  // GPIO Port E Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCGPIO_S3      0x00000008  // GPIO Port D Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCGPIO_S2      0x00000004  // GPIO Port C Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCGPIO_S1      0x00000002  // GPIO Port B Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCGPIO_S0      0x00000001  // GPIO Port A Sleep Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_SCGCDMA_S0       0x00000001  // uDMA Module Sleep Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCUART_S7      0x00000080  // UART Module 7 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCUART_S6      0x00000040  // UART Module 6 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCUART_S5      0x00000020  // UART Module 5 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCUART_S4      0x00000010  // UART Module 4 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCUART_S3      0x00000008  // UART Module 3 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCUART_S2      0x00000004  // UART Module 2 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCUART_S1      0x00000002  // UART Module 1 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCUART_S0      0x00000001  // UART Module 0 Sleep Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_SCGCSSI_S3       0x00000008  // SSI Module 3 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCSSI_S2       0x00000004  // SSI Module 2 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCSSI_S1       0x00000002  // SSI Module 1 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCSSI_S0       0x00000001  // SSI Module 0 Sleep Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_SCGCI2C_S5       0x00000020  // I2C Module 5 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCI2C_S4       0x00000010  // I2C Module 4 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCI2C_S3       0x00000008  // I2C Module 3 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCI2C_S2       0x00000004  // I2C Module 2 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCI2C_S1       0x00000002  // I2C Module 1 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCI2C_S0       0x00000001  // I2C Module 0 Sleep Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_SCGCCAN_S0       0x00000001  // CAN Module 0 Sleep Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCADC register.
//
//*****************************************************************************
#define SYSCTL_SCGCADC_S1       0x00000002  // ADC Module 1 Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_SCGCADC_S0       0x00000001  // ADC Module 0 Sleep Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCACMP_S0      0x00000001  // Analog Comparator Module 0 Sleep
                                            // Mode Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCEEPROM_S0    0x00000001  // EEPROM Module Sleep Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCWTIMER_S5    0x00000020  // 32/64-Bit Wide General-Purpose
                                            // Timer 5 Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_SCGCWTIMER_S4    0x00000010  // 32/64-Bit Wide General-Purpose
                                            // Timer 4 Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_SCGCWTIMER_S3    0x00000008  // 32/64-Bit Wide General-Purpose
                                            // Timer 3 Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_SCGCWTIMER_S2    0x00000004  // 32/64-Bit Wide General-Purpose
                                            // Timer 2 Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_SCGCWTIMER_S1    0x00000002  // 32/64-Bit Wide General-Purpose
                                            // Timer 1 Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_SCGCWTIMER_S0    0x00000001  // 32/64-Bit Wide General-Purpose
                                            // Timer 0 Sleep Mode Clock Gating
                                            // Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCWD register.
//
//*****************************************************************************
#define SYSCTL_DCGCWD_D1        0x00000002  // Watchdog Timer 1 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCWD_D0        0x00000001  // Watchdog Timer 0 Deep-Sleep Mode
                                            // Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCTIMER_D5     0x00000020  // 16/32-Bit General-Purpose Timer
                                            // 5 Deep-Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_DCGCTIMER_D4     0x00000010  // 16/32-Bit General-Purpose Timer
                                            // 4 Deep-Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_DCGCTIMER_D3     0x00000008  // 16/32-Bit General-Purpose Timer
                                            // 3 Deep-Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_DCGCTIMER_D2     0x00000004  // 16/32-Bit General-Purpose Timer
                                            // 2 Deep-Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_DCGCTIMER_D1     0x00000002  // 16/32-Bit General-Purpose Timer
                                            // 1 Deep-Sleep Mode Clock Gating
                                            // Control
#define SYSCTL_DCGCTIMER_D0     0x00000001  // 16/32-Bit General-Purpose Timer
                                            // 0 Deep-Sleep Mode Clock Gating
                                            // Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCGPIO_D6      0x00000040  // GPIO Port G Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCGPIO_D5      0x00000020  // GPIO Port F Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCGPIO_D4      0x00000010  // GPIO Port E Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCGPIO_D3      0x00000008  // GPIO Port D Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCGPIO_D2      0x00000004  // GPIO Port C Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCGPIO_D1      0x00000002  // GPIO Port B Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCGPIO_D0      0x00000001  // GPIO Port A Deep-Sleep Mode
                                            // Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_DCGCDMA_D0       0x00000001  // uDMA Module Deep-Sleep Mode
                                            // Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCUART_D7      0x00000080  // UART Module 7 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCUART_D6      0x00000040  // UART Module 6 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCUART_D5      0x00000020  // UART Module 5 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCUART_D4      0x00000010  // UART Module 4 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCUART_D3      0x00000008  // UART Module 3 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCUART_D2      0x00000004  // UART Module 2 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCUART_D1      0x00000002  // UART Module 1 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCUART_D0      0x00000001  // UART Module 0 Deep-Sleep Mode
                                            // Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_DCGCSSI_D3       0x00000008  // SSI Module 3 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCSSI_D2       0x00000004  // SSI Module 2 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCSSI_D1       0x00000002  // SSI Module 1 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCSSI_D0       0x00000001  // SSI Module 0 Deep-Sleep Mode
                                            // Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_DCGCI2C_D5       0x00000020  // I2C Module 5 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCI2C_D4       0x00000010  // I2C Module 4 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCI2C_D3       0x00000008  // I2C Module 3 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCI2C_D2       0x00000004  // I2C Module 2 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCI2C_D1       0x00000002  // I2C Module 1 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCI2C_D0       0x00000001  // I2C Module 0 Deep-Sleep Mode
                                            // Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_DCGCCAN_D0       0x00000001  // CAN Module 0 Deep-Sleep Mode
                                            // Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCADC register.
//
//*****************************************************************************
#define SYSCTL_DCGCADC_D1       0x00000002  // ADC Module 1 Deep-Sleep Mode
                                            // Clock Gating Control
#define SYSCTL_DCGCADC_D0       0x00000001  // ADC Module 0 Deep-Sleep Mode
                                            // Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCACMP_D0      0x00000001  // Analog Comparator Module 0
                                            // Deep-Sleep Mode Clock Gating
                                            // Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCEEPROM_D0    0x00000001  // EEPROM Module Deep-Sleep Mode
                                            // Clock Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCWTIMER_D5    0x00000020  // 32/64-Bit Wide General-Purpose
                                            // Timer 5 Deep-Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_DCGCWTIMER_D4    0x00000010  // 32/64-Bit Wide General-Purpose
                                            // Timer 4 Deep-Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_DCGCWTIMER_D3    0x00000008  // 32/64-Bit Wide General-Purpose
                                            // Timer 3 Deep-Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_DCGCWTIMER_D2    0x00000004  // 32/64-Bit Wide General-Purpose
                                            // Timer 2 Deep-Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_DCGCWTIMER_D1    0x00000002  // 32/64-Bit Wide General-Purpose
                                            // Timer 1 Deep-Sleep Mode Clock
                                            // Gating Control
#define SYSCTL_DCGCWTIMER_D0    0x00000001  // 32/64-Bit Wide General-Purpose
                                            // Timer 0 Deep-Sleep Mode Clock
                                            // Gating Control

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRWD register.
//
//*****************************************************************************
#define SYSCTL_PRWD_R1          0x00000002  // Watchdog Timer 1 Peripheral
                                            // Ready
#define SYSCTL_PRWD_R0          0x00000001  // Watchdog Timer 0 Peripheral
                                            // Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRTIMER register.
//
//*****************************************************************************
#define SYSCTL_PRTIMER_R5       0x00000020  // 16/32-Bit General-Purpose Timer
                                            // 5 Peripheral Ready
#define SYSCTL_PRTIMER_R4       0x00000010  // 16/32-Bit General-Purpose Timer
                                            // 4 Peripheral Ready
#define SYSCTL_PRTIMER_R3       0x00000008  // 16/32-Bit General-Purpose Timer
                                            // 3 Peripheral Ready
#define SYSCTL_PRTIMER_R2       0x00000004  // 16/32-Bit General-Purpose Timer
                                            // 2 Peripheral Ready
#define SYSCTL_PRTIMER_R1       0x00000002  // 16/32-Bit General-Purpose Timer
                                            // 1 Peripheral Ready
#define SYSCTL_PRTIMER_R0       0x00000001  // 16/32-Bit General-Purpose Timer
                                            // 0 Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRGPIO register.
//
//*****************************************************************************
#define SYSCTL_PRGPIO_R6        0x00000040  // GPIO Port G Peripheral Ready
#define SYSCTL_PRGPIO_R5        0x00000020  // GPIO Port F Peripheral Ready
#define SYSCTL_PRGPIO_R4        0x00000010  // GPIO Port E Peripheral Ready
#define SYSCTL_PRGPIO_R3        0x00000008  // GPIO Port D Peripheral Ready
#define SYSCTL_PRGPIO_R2        0x00000004  // GPIO Port C Peripheral Ready
#define SYSCTL_PRGPIO_R1        0x00000002  // GPIO Port B Peripheral Ready
#define SYSCTL_PRGPIO_R0        0x00000001  // GPIO Port A Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRDMA register.
//
//*****************************************************************************
#define SYSCTL_PRDMA_R0         0x00000001  // uDMA Module Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRUART register.
//
//*****************************************************************************
#define SYSCTL_PRUART_R7        0x00000080  // UART Module 7 Peripheral Ready
#define SYSCTL_PRUART_R6        0x00000040  // UART Module 6 Peripheral Ready
#define SYSCTL_PRUART_R5        0x00000020  // UART Module 5 Peripheral Ready
#define SYSCTL_PRUART_R4        0x00000010  // UART Module 4 Peripheral Ready
#define SYSCTL_PRUART_R3        0x00000008  // UART Module 3 Peripheral Ready
#define SYSCTL_PRUART_R2        0x00000004  // UART Module 2 Peripheral Ready
#define SYSCTL_PRUART_R1        0x00000002  // UART Module 1 Peripheral Ready
#define SYSCTL_PRUART_R0        0x00000001  // UART Module 0 Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRSSI register.
//
//*****************************************************************************
#define SYSCTL_PRSSI_R3         0x00000008  // SSI Module 3 Peripheral Ready
#define SYSCTL_PRSSI_R2         0x00000004  // SSI Module 2 Peripheral Ready
#define SYSCTL_PRSSI_R1         0x00000002  // SSI Module 1 Peripheral Ready
#define SYSCTL_PRSSI_R0         0x00000001  // SSI Module 0 Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRI2C register.
//
//*****************************************************************************
#define SYSCTL_PRI2C_R5         0x00000020  // I2C Module 5 Peripheral Ready
#define SYSCTL_PRI2C_R4         0x00000010  // I2C Module 4 Peripheral Ready
#define SYSCTL_PRI2C_R3         0x00000008  // I2C Module 3 Peripheral Ready
#define SYSCTL_PRI2C_R2         0x00000004  // I2C Module 2 Peripheral Ready
#define SYSCTL_PRI2C_R1         0x00000002  // I2C Module 1 Peripheral Ready
#define SYSCTL_PRI2C_R0         0x00000001  // I2C Module 0 Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRCAN register.
//
//*****************************************************************************
#define SYSCTL_PRCAN_R0         0x00000001  // CAN Module 0 Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRADC register.
//
//*****************************************************************************
#define SYSCTL_PRADC_R1         0x00000002  // ADC Module 1 Peripheral Ready
#define SYSCTL_PRADC_R0         0x00000001  // ADC Module 0 Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRACMP register.
//
//*****************************************************************************
#define SYSCTL_PRACMP_R0        0x00000001  // Analog Comparator Module 0
                                            // Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PREEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_PREEPROM_R0      0x00000001  // EEPROM Module Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_PRWTIMER_R5      0x00000020  // 32/64-Bit Wide General-Purpose
                                            // Timer 5 Peripheral Ready
#define SYSCTL_PRWTIMER_R4      0x00000010  // 32/64-Bit Wide General-Purpose
                                            // Timer 4 Peripheral Ready
#define SYSCTL_PRWTIMER_R3      0x00000008  // 32/64-Bit Wide General-Purpose
                                            // Timer 3 Peripheral Ready
#define SYSCTL_PRWTIMER_R2      0x00000004  // 32/64-Bit Wide General-Purpose
                                            // Timer 2 Peripheral Ready
#define SYSCTL_PRWTIMER_R1      0x00000002  // 32/64-Bit Wide General-Purpose
                                            // Timer 1 Peripheral Ready
#define SYSCTL_PRWTIMER_R0      0x00000001  // 32/64-Bit Wide General-Purpose
                                            // Timer 0 Peripheral Ready

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_STAT register.
//
//*****************************************************************************
#define UDMA_STAT_DMACHANS_M    0x001F0000  // Available uDMA Channels Minus 1
#define UDMA_STAT_STATE_M       0x000000F0  // Control State Machine Status
#define UDMA_STAT_STATE_IDLE    0x00000000  // Idle
#define UDMA_STAT_STATE_RD_CTRL 0x00000010  // Reading channel controller data
#define UDMA_STAT_STATE_RD_SRCENDP                                            \
                                0x00000020  // Reading source end pointer
#define UDMA_STAT_STATE_RD_DSTENDP                                            \
                                0x00000030  // Reading destination end pointer
#define UDMA_STAT_STATE_RD_SRCDAT                                             \
                                0x00000040  // Reading source data
#define UDMA_STAT_STATE_WR_DSTDAT                                             \
                                0x00000050  // Writing destination data
#define UDMA_STAT_STATE_WAIT    0x00000060  // Waiting for uDMA request to
                                            // clear
#define UDMA_STAT_STATE_WR_CTRL 0x00000070  // Writing channel controller data
#define UDMA_STAT_STATE_STALL   0x00000080  // Stalled
#define UDMA_STAT_STATE_DONE    0x00000090  // Done
#define UDMA_STAT_STATE_UNDEF   0x000000A0  // Undefined
#define UDMA_STAT_MASTEN        0x00000001  // Master Enable Status
#define UDMA_STAT_DMACHANS_S    16

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CFG register.
//
//*****************************************************************************
#define UDMA_CFG_MASTEN         0x00000001  // Controller Master Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CTLBASE register.
//
//*****************************************************************************
#define UDMA_CTLBASE_ADDR_M     0xFFFFFC00  // Channel Control Base Address
#define UDMA_CTLBASE_ADDR_S     10

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ALTBASE register.
//
//*****************************************************************************
#define UDMA_ALTBASE_ADDR_M     0xFFFFFFFF  // Alternate Channel Address
                                            // Pointer
#define UDMA_ALTBASE_ADDR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_WAITSTAT register.
//
//*****************************************************************************
#define UDMA_WAITSTAT_WAITREQ_M 0xFFFFFFFF  // Channel [n] Wait Status

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_SWREQ register.
//
//*****************************************************************************
#define UDMA_SWREQ_M            0xFFFFFFFF  // Channel [n] Software Request

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_USEBURSTSET
// register.
//
//*****************************************************************************
#define UDMA_USEBURSTSET_SET_M  0xFFFFFFFF  // Channel [n] Useburst Set

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_USEBURSTCLR
// register.
//
//*****************************************************************************
#define UDMA_USEBURSTCLR_CLR_M  0xFFFFFFFF  // Channel [n] Useburst Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_REQMASKSET
// register.
//
//*****************************************************************************
#define UDMA_REQMASKSET_SET_M   0xFFFFFFFF  // Channel [n] Request Mask Set

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_REQMASKCLR
// register.
//
//*****************************************************************************
#define UDMA_REQMASKCLR_CLR_M   0xFFFFFFFF  // Channel [n] Request Mask Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ENASET register.
//
//*****************************************************************************
#define UDMA_ENASET_SET_M       0xFFFFFFFF  // Channel [n] Enable Set

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ENACLR register.
//
//*****************************************************************************
#define UDMA_ENACLR_CLR_M       0xFFFFFFFF  // Clear Channel [n] Enable Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ALTSET register.
//
//*****************************************************************************
#define UDMA_ALTSET_SET_M       0xFFFFFFFF  // Channel [n] Alternate Set

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ALTCLR register.
//
//*****************************************************************************
#define UDMA_ALTCLR_CLR_M       0xFFFFFFFF  // Channel [n] Alternate Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_PRIOSET register.
//
//*****************************************************************************
#define UDMA_PRIOSET_SET_M      0xFFFFFFFF  // Channel [n] Priority Set

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_PRIOCLR register.
//
//*****************************************************************************
#define UDMA_PRIOCLR_CLR_M      0xFFFFFFFF  // Channel [n] Priority Clear

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_ERRCLR register.
//
//*****************************************************************************
#define UDMA_ERRCLR_ERRCLR      0x00000001  // uDMA Bus Error Status

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHASGN register.
//
//*****************************************************************************
#define UDMA_CHASGN_M           0xFFFFFFFF  // Channel [n] Assignment Select
#define UDMA_CHASGN_PRIMARY     0x00000000  // Use the primary channel
                                            // assignment
#define UDMA_CHASGN_SECONDARY   0x00000001  // Use the secondary channel
                                            // assignment

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHIS register.
//
//*****************************************************************************
#define UDMA_CHIS_M             0xFFFFFFFF  // Channel [n] Interrupt Status

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP0 register.
//
//*****************************************************************************
#define UDMA_CHMAP0_CH7SEL_M    0xF0000000  // uDMA Channel 7 Source Select
#define UDMA_CHMAP0_CH6SEL_M    0x0F000000  // uDMA Channel 6 Source Select
#define UDMA_CHMAP0_CH5SEL_M    0x00F00000  // uDMA Channel 5 Source Select
#define UDMA_CHMAP0_CH4SEL_M    0x000F0000  // uDMA Channel 4 Source Select
#define UDMA_CHMAP0_CH3SEL_M    0x0000F000  // uDMA Channel 3 Source Select
#define UDMA_CHMAP0_CH2SEL_M    0x00000F00  // uDMA Channel 2 Source Select
#define UDMA_CHMAP0_CH1SEL_M    0x000000F0  // uDMA Channel 1 Source Select
#define UDMA_CHMAP0_CH0SEL_M    0x0000000F  // uDMA Channel 0 Source Select
#define UDMA_CHMAP0_CH7SEL_S    28
#define UDMA_CHMAP0_CH6SEL_S    24
#define UDMA_CHMAP0_CH5SEL_S    20
#define UDMA_CHMAP0_CH4SEL_S    16
#define UDMA_CHMAP0_CH3SEL_S    12
#define UDMA_CHMAP0_CH2SEL_S    8
#define UDMA_CHMAP0_CH1SEL_S    4
#define UDMA_CHMAP0_CH0SEL_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP1 register.
//
//*****************************************************************************
#define UDMA_CHMAP1_CH15SEL_M   0xF0000000  // uDMA Channel 15 Source Select
#define UDMA_CHMAP1_CH14SEL_M   0x0F000000  // uDMA Channel 14 Source Select
#define UDMA_CHMAP1_CH13SEL_M   0x00F00000  // uDMA Channel 13 Source Select
#define UDMA_CHMAP1_CH12SEL_M   0x000F0000  // uDMA Channel 12 Source Select
#define UDMA_CHMAP1_CH11SEL_M   0x0000F000  // uDMA Channel 11 Source Select
#define UDMA_CHMAP1_CH10SEL_M   0x00000F00  // uDMA Channel 10 Source Select
#define UDMA_CHMAP1_CH9SEL_M    0x000000F0  // uDMA Channel 9 Source Select
#define UDMA_CHMAP1_CH8SEL_M    0x0000000F  // uDMA Channel 8 Source Select
#define UDMA_CHMAP1_CH15SEL_S   28
#define UDMA_CHMAP1_CH14SEL_S   24
#define UDMA_CHMAP1_CH13SEL_S   20
#define UDMA_CHMAP1_CH12SEL_S   16
#define UDMA_CHMAP1_CH11SEL_S   12
#define UDMA_CHMAP1_CH10SEL_S   8
#define UDMA_CHMAP1_CH9SEL_S    4
#define UDMA_CHMAP1_CH8SEL_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP2 register.
//
//*****************************************************************************
#define UDMA_CHMAP2_CH23SEL_M   0xF0000000  // uDMA Channel 23 Source Select
#define UDMA_CHMAP2_CH22SEL_M   0x0F000000  // uDMA Channel 22 Source Select
#define UDMA_CHMAP2_CH21SEL_M   0x00F00000  // uDMA Channel 21 Source Select
#define UDMA_CHMAP2_CH20SEL_M   0x000F0000  // uDMA Channel 20 Source Select
#define UDMA_CHMAP2_CH19SEL_M   0x0000F000  // uDMA Channel 19 Source Select
#define UDMA_CHMAP2_CH18SEL_M   0x00000F00  // uDMA Channel 18 Source Select
#define UDMA_CHMAP2_CH17SEL_M   0x000000F0  // uDMA Channel 17 Source Select
#define UDMA_CHMAP2_CH16SEL_M   0x0000000F  // uDMA Channel 16 Source Select
#define UDMA_CHMAP2_CH23SEL_S   28
#define UDMA_CHMAP2_CH22SEL_S   24
#define UDMA_CHMAP2_CH21SEL_S   20
#define UDMA_CHMAP2_CH20SEL_S   16
#define UDMA_CHMAP2_CH19SEL_S   12
#define UDMA_CHMAP2_CH18SEL_S   8
#define UDMA_CHMAP2_CH17SEL_S   4
#define UDMA_CHMAP2_CH16SEL_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_CHMAP3 register.
//
//*****************************************************************************
#define UDMA_CHMAP3_CH31SEL_M   0xF0000000  // uDMA Channel 31 Source Select
#define UDMA_CHMAP3_CH30SEL_M   0x0F000000  // uDMA Channel 30 Source Select
#define UDMA_CHMAP3_CH29SEL_M   0x00F00000  // uDMA Channel 29 Source Select
#define UDMA_CHMAP3_CH28SEL_M   0x000F0000  // uDMA Channel 28 Source Select
#define UDMA_CHMAP3_CH27SEL_M   0x0000F000  // uDMA Channel 27 Source Select
#define UDMA_CHMAP3_CH26SEL_M   0x00000F00  // uDMA Channel 26 Source Select
#define UDMA_CHMAP3_CH25SEL_M   0x000000F0  // uDMA Channel 25 Source Select
#define UDMA_CHMAP3_CH24SEL_M   0x0000000F  // uDMA Channel 24 Source Select
#define UDMA_CHMAP3_CH31SEL_S   28
#define UDMA_CHMAP3_CH30SEL_S   24
#define UDMA_CHMAP3_CH29SEL_S   20
#define UDMA_CHMAP3_CH28SEL_S   16
#define UDMA_CHMAP3_CH27SEL_S   12
#define UDMA_CHMAP3_CH26SEL_S   8
#define UDMA_CHMAP3_CH25SEL_S   4
#define UDMA_CHMAP3_CH24SEL_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_O_SRCENDP register.
//
//*****************************************************************************
#define UDMA_SRCENDP_ADDR_M     0xFFFFFFFF  // Source Address End Pointer
#define UDMA_SRCENDP_ADDR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_O_DSTENDP register.
//
//*****************************************************************************
#define UDMA_DSTENDP_ADDR_M     0xFFFFFFFF  // Destination Address End Pointer
#define UDMA_DSTENDP_ADDR_S     0

//*****************************************************************************
//
// The following are defines for the bit fields in the UDMA_O_CHCTL register.
//
//*****************************************************************************
#define UDMA_CHCTL_DSTINC_M     0xC0000000  // Destination Address Increment
#define UDMA_CHCTL_DSTINC_8     0x00000000  // Byte
#define UDMA_CHCTL_DSTINC_16    0x40000000  // Half-word
#define UDMA_CHCTL_DSTINC_32    0x80000000  // Word
#define UDMA_CHCTL_DSTINC_NONE  0xC0000000  // No increment
#define UDMA_CHCTL_DSTSIZE_M    0x30000000  // Destination Data Size
#define UDMA_CHCTL_DSTSIZE_8    0x00000000  // Byte
#define UDMA_CHCTL_DSTSIZE_16   0x10000000  // Half-word
#define UDMA_CHCTL_DSTSIZE_32   0x20000000  // Word
#define UDMA_CHCTL_SRCINC_M     0x0C000000  // Source Address Increment
#define UDMA_CHCTL_SRCINC_8     0x00000000  // Byte
#define UDMA_CHCTL_SRCINC_16    0x04000000  // Half-word
#define UDMA_CHCTL_SRCINC_32    0x08000000  // Word
#define UDMA_CHCTL_SRCINC_NONE  0x0C000000  // No increment
#define UDMA_CHCTL_SRCSIZE_M    0x03000000  // Source Data Size
#define UDMA_CHCTL_SRCSIZE_8    0x00000000  // Byte
#define UDMA_CHCTL_SRCSIZE_16   0x01000000  // Half-word
#define UDMA_CHCTL_SRCSIZE_32   0x02000000  // Word
#define UDMA_CHCTL_ARBSIZE_M    0x0003C000  // Arbitration Size
#define UDMA_CHCTL_ARBSIZE_1    0x00000000  // 1 Transfer
#define UDMA_CHCTL_ARBSIZE_2    0x00004000  // 2 Transfers
#define UDMA_CHCTL_ARBSIZE_4    0x00008000  // 4 Transfers
#define UDMA_CHCTL_ARBSIZE_8    0x0000C000  // 8 Transfers
#define UDMA_CHCTL_ARBSIZE_16   0x00010000  // 16 Transfers
#define UDMA_CHCTL_ARBSIZE_32   0x00014000  // 32 Transfers
#define UDMA_CHCTL_ARBSIZE_64   0x00018000  // 64 Transfers
#define UDMA_CHCTL_ARBSIZE_128  0x0001C000  // 128 Transfers
#define UDMA_CHCTL_ARBSIZE_256  0x00020000  // 256 Transfers
#define UDMA_CHCTL_ARBSIZE_512  0x00024000  // 512 Transfers
#define UDMA_CHCTL_ARBSIZE_1024 0x00028000  // 1024 Transfers
#define UDMA_CHCTL_XFERSIZE_M   0x00003FF0  // Transfer Size (minus 1)
#define UDMA_CHCTL_NXTUSEBURST  0x00000008  // Next Useburst
#define UDMA_CHCTL_XFERMODE_M   0x00000007  // uDMA Transfer Mode
#define UDMA_CHCTL_XFERMODE_STOP                                              \
                                0x00000000  // Stop
#define UDMA_CHCTL_XFERMODE_BASIC                                             \
                                0x00000001  // Basic
#define UDMA_CHCTL_XFERMODE_AUTO                                              \
                                0x00000002  // Auto-Request
#define UDMA_CHCTL_XFERMODE_PINGPONG                                          \
                                0x00000003  // Ping-Pong
#define UDMA_CHCTL_XFERMODE_MEM_SG                                            \
                                0x00000004  // Memory Scatter-Gather
#define UDMA_CHCTL_XFERMODE_MEM_SGA                                           \
                                0x00000005  // Alternate Memory Scatter-Gather
#define UDMA_CHCTL_XFERMODE_PER_SG                                            \
                                0x00000006  // Peripheral Scatter-Gather
#define UDMA_CHCTL_XFERMODE_PER_SGA                                           \
                                0x00000007  // Alternate Peripheral
                                            // Scatter-Gather
#define UDMA_CHCTL_XFERSIZE_S   4

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTLR register.
//
//*****************************************************************************
#define NVIC_ACTLR_DISOOFP      0x00000200  // Disable Out-Of-Order Floating
                                            // Point
#define NVIC_ACTLR_DISFPCA      0x00000100  // Disable CONTROL
#define NVIC_ACTLR_DISFOLD      0x00000004  // Disable IT Folding
#define NVIC_ACTLR_DISWBUF      0x00000002  // Disable Write Buffer
#define NVIC_ACTLR_DISMCYC      0x00000001  // Disable Interrupts of Multiple
                                            // Cycle Instructions

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_CTRL register.
//
//*****************************************************************************
#define NVIC_ST_CTRL_COUNT      0x00010000  // Count Flag
#define NVIC_ST_CTRL_CLK_SRC    0x00000004  // Clock Source
#define NVIC_ST_CTRL_INTEN      0x00000002  // Interrupt Enable
#define NVIC_ST_CTRL_ENABLE     0x00000001  // Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_RELOAD register.
//
//*****************************************************************************
#define NVIC_ST_RELOAD_M        0x00FFFFFF  // Reload Value
#define NVIC_ST_RELOAD_S        0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_CURRENT
// register.
//
//*****************************************************************************
#define NVIC_ST_CURRENT_M       0x00FFFFFF  // Current Value
#define NVIC_ST_CURRENT_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN0 register.
//
//*****************************************************************************
#define NVIC_EN0_INT_M          0xFFFFFFFF  // Interrupt Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN1 register.
//
//*****************************************************************************
#define NVIC_EN1_INT_M          0xFFFFFFFF  // Interrupt Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN2 register.
//
//*****************************************************************************
#define NVIC_EN2_INT_M          0xFFFFFFFF  // Interrupt Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN3 register.
//
//*****************************************************************************
#define NVIC_EN3_INT_M          0xFFFFFFFF  // Interrupt Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN4 register.
//
//*****************************************************************************
#define NVIC_EN4_INT_M          0x000007FF  // Interrupt Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS0 register.
//
//*****************************************************************************
#define NVIC_DIS0_INT_M         0xFFFFFFFF  // Interrupt Disable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS1 register.
//
//*****************************************************************************
#define NVIC_DIS1_INT_M         0xFFFFFFFF  // Interrupt Disable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS2 register.
//
//*****************************************************************************
#define NVIC_DIS2_INT_M         0xFFFFFFFF  // Interrupt Disable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS3 register.
//
//*****************************************************************************
#define NVIC_DIS3_INT_M         0xFFFFFFFF  // Interrupt Disable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS4 register.
//
//*****************************************************************************
#define NVIC_DIS4_INT_M         0x000007FF  // Interrupt Disable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND0 register.
//
//*****************************************************************************
#define NVIC_PEND0_INT_M        0xFFFFFFFF  // Interrupt Set Pending

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND1 register.
//
//*****************************************************************************
#define NVIC_PEND1_INT_M        0xFFFFFFFF  // Interrupt Set Pending

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND2 register.
//
//*****************************************************************************
#define NVIC_PEND2_INT_M        0xFFFFFFFF  // Interrupt Set Pending

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND3 register.
//
//*****************************************************************************
#define NVIC_PEND3_INT_M        0xFFFFFFFF  // Interrupt Set Pending

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND4 register.
//
//*****************************************************************************
#define NVIC_PEND4_INT_M        0x000007FF  // Interrupt Set Pending

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND0 register.
//
//*****************************************************************************
#define NVIC_UNPEND0_INT_M      0xFFFFFFFF  // Interrupt Clear Pending

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND1 register.
//
//*****************************************************************************
#define NVIC_UNPEND1_INT_M      0xFFFFFFFF  // Interrupt Clear Pending

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND2 register.
//
//*****************************************************************************
#define NVIC_UNPEND2_INT_M      0xFFFFFFFF  // Interrupt Clear Pending

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND3 register.
//
//*****************************************************************************
#define NVIC_UNPEND3_INT_M      0xFFFFFFFF  // Interrupt Clear Pending

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND4 register.
//
//*****************************************************************************
#define NVIC_UNPEND4_INT_M      0x000007FF  // Interrupt Clear Pending

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE0 register.
//
//*****************************************************************************
#define NVIC_ACTIVE0_INT_M      0xFFFFFFFF  // Interrupt Active

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE1 register.
//
//*****************************************************************************
#define NVIC_ACTIVE1_INT_M      0xFFFFFFFF  // Interrupt Active

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE2 register.
//
//*****************************************************************************
#define NVIC_ACTIVE2_INT_M      0xFFFFFFFF  // Interrupt Active

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE3 register.
//
//*****************************************************************************
#define NVIC_ACTIVE3_INT_M      0xFFFFFFFF  // Interrupt Active

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE4 register.
//
//*****************************************************************************
#define NVIC_ACTIVE4_INT_M      0x000007FF  // Interrupt Active

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI0 register.
//
//*****************************************************************************
#define NVIC_PRI0_INT3_M        0xE0000000  // Interrupt 3 Priority Mask
#define NVIC_PRI0_INT2_M        0x00E00000  // Interrupt 2 Priority Mask
#define NVIC_PRI0_INT1_M        0x0000E000  // Interrupt 1 Priority Mask
#define NVIC_PRI0_INT0_M        0x000000E0  // Interrupt 0 Priority Mask
#define NVIC_PRI0_INT3_S        29
#define NVIC_PRI0_INT2_S        21
#define NVIC_PRI0_INT1_S        13
#define NVIC_PRI0_INT0_S        5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI1 register.
//
//*****************************************************************************
#define NVIC_PRI1_INT7_M        0xE0000000  // Interrupt 7 Priority Mask
#define NVIC_PRI1_INT6_M        0x00E00000  // Interrupt 6 Priority Mask
#define NVIC_PRI1_INT5_M        0x0000E000  // Interrupt 5 Priority Mask
#define NVIC_PRI1_INT4_M        0x000000E0  // Interrupt 4 Priority Mask
#define NVIC_PRI1_INT7_S        29
#define NVIC_PRI1_INT6_S        21
#define NVIC_PRI1_INT5_S        13
#define NVIC_PRI1_INT4_S        5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI2 register.
//
//*****************************************************************************
#define NVIC_PRI2_INT11_M       0xE0000000  // Interrupt 11 Priority Mask
#define NVIC_PRI2_INT10_M       0x00E00000  // Interrupt 10 Priority Mask
#define NVIC_PRI2_INT9_M        0x0000E000  // Interrupt 9 Priority Mask
#define NVIC_PRI2_INT8_M        0x000000E0  // Interrupt 8 Priority Mask
#define NVIC_PRI2_INT11_S       29
#define NVIC_PRI2_INT10_S       21
#define NVIC_PRI2_INT9_S        13
#define NVIC_PRI2_INT8_S        5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI3 register.
//
//*****************************************************************************
#define NVIC_PRI3_INT15_M       0xE0000000  // Interrupt 15 Priority Mask
#define NVIC_PRI3_INT14_M       0x00E00000  // Interrupt 14 Priority Mask
#define NVIC_PRI3_INT13_M       0x0000E000  // Interrupt 13 Priority Mask
#define NVIC_PRI3_INT12_M       0x000000E0  // Interrupt 12 Priority Mask
#define NVIC_PRI3_INT15_S       29
#define NVIC_PRI3_INT14_S       21
#define NVIC_PRI3_INT13_S       13
#define NVIC_PRI3_INT12_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI4 register.
//
//*****************************************************************************
#define NVIC_PRI4_INT19_M       0xE0000000  // Interrupt 19 Priority Mask
#define NVIC_PRI4_INT18_M       0x00E00000  // Interrupt 18 Priority Mask
#define NVIC_PRI4_INT17_M       0x0000E000  // Interrupt 17 Priority Mask
#define NVIC_PRI4_INT16_M       0x000000E0  // Interrupt 16 Priority Mask
#define NVIC_PRI4_INT19_S       29
#define NVIC_PRI4_INT18_S       21
#define NVIC_PRI4_INT17_S       13
#define NVIC_PRI4_INT16_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI5 register.
//
//*****************************************************************************
#define NVIC_PRI5_INT23_M       0xE0000000  // Interrupt 23 Priority Mask
#define NVIC_PRI5_INT22_M       0x00E00000  // Interrupt 22 Priority Mask
#define NVIC_PRI5_INT21_M       0x0000E000  // Interrupt 21 Priority Mask
#define NVIC_PRI5_INT20_M       0x000000E0  // Interrupt 20 Priority Mask
#define NVIC_PRI5_INT23_S       29
#define NVIC_PRI5_INT22_S       21
#define NVIC_PRI5_INT21_S       13
#define NVIC_PRI5_INT20_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI6 register.
//
//*****************************************************************************
#define NVIC_PRI6_INT27_M       0xE0000000  // Interrupt 27 Priority Mask
#define NVIC_PRI6_INT26_M       0x00E00000  // Interrupt 26 Priority Mask
#define NVIC_PRI6_INT25_M       0x0000E000  // Interrupt 25 Priority Mask
#define NVIC_PRI6_INT24_M       0x000000E0  // Interrupt 24 Priority Mask
#define NVIC_PRI6_INT27_S       29
#define NVIC_PRI6_INT26_S       21
#define NVIC_PRI6_INT25_S       13
#define NVIC_PRI6_INT24_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI7 register.
//
//*****************************************************************************
#define NVIC_PRI7_INT31_M       0xE0000000  // Interrupt 31 Priority Mask
#define NVIC_PRI7_INT30_M       0x00E00000  // Interrupt 30 Priority Mask
#define NVIC_PRI7_INT29_M       0x0000E000  // Interrupt 29 Priority Mask
#define NVIC_PRI7_INT28_M       0x000000E0  // Interrupt 28 Priority Mask
#define NVIC_PRI7_INT31_S       29
#define NVIC_PRI7_INT30_S       21
#define NVIC_PRI7_INT29_S       13
#define NVIC_PRI7_INT28_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI8 register.
//
//*****************************************************************************
#define NVIC_PRI8_INT35_M       0xE0000000  // Interrupt 35 Priority Mask
#define NVIC_PRI8_INT34_M       0x00E00000  // Interrupt 34 Priority Mask
#define NVIC_PRI8_INT33_M       0x0000E000  // Interrupt 33 Priority Mask
#define NVIC_PRI8_INT32_M       0x000000E0  // Interrupt 32 Priority Mask
#define NVIC_PRI8_INT35_S       29
#define NVIC_PRI8_INT34_S       21
#define NVIC_PRI8_INT33_S       13
#define NVIC_PRI8_INT32_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI9 register.
//
//*****************************************************************************
#define NVIC_PRI9_INT39_M       0xE0000000  // Interrupt 39 Priority Mask
#define NVIC_PRI9_INT38_M       0x00E00000  // Interrupt 38 Priority Mask
#define NVIC_PRI9_INT37_M       0x0000E000  // Interrupt 37 Priority Mask
#define NVIC_PRI9_INT36_M       0x000000E0  // Interrupt 36 Priority Mask
#define NVIC_PRI9_INT39_S       29
#define NVIC_PRI9_INT38_S       21
#define NVIC_PRI9_INT37_S       13
#define NVIC_PRI9_INT36_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI10 register.
//
//*****************************************************************************
#define NVIC_PRI10_INT43_M      0xE0000000  // Interrupt 43 Priority Mask
#define NVIC_PRI10_INT42_M      0x00E00000  // Interrupt 42 Priority Mask
#define NVIC_PRI10_INT41_M      0x0000E000  // Interrupt 41 Priority Mask
#define NVIC_PRI10_INT40_M      0x000000E0  // Interrupt 40 Priority Mask
#define NVIC_PRI10_INT43_S      29
#define NVIC_PRI10_INT42_S      21
#define NVIC_PRI10_INT41_S      13
#define NVIC_PRI10_INT40_S      5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI11 register.
//
//*****************************************************************************
#define NVIC_PRI11_INT47_M      0xE0000000  // Interrupt 47 Priority Mask
#define NVIC_PRI11_INT46_M      0x00E00000  // Interrupt 46 Priority Mask
#define NVIC_PRI11_INT45_M      0x0000E000  // Interrupt 45 Priority Mask
#define NVIC_PRI11_INT44_M      0x000000E0  // Interrupt 44 Priority Mask
#define NVIC_PRI11_INT47_S      29
#define NVIC_PRI11_INT46_S      21
#define NVIC_PRI11_INT45_S      13
#define NVIC_PRI11_INT44_S      5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI12 register.
//
//*****************************************************************************
#define NVIC_PRI12_INT51_M      0xE0000000  // Interrupt 51 Priority Mask
#define NVIC_PRI12_INT50_M      0x00E00000  // Interrupt 50 Priority Mask
#define NVIC_PRI12_INT49_M      0x0000E000  // Interrupt 49 Priority Mask
#define NVIC_PRI12_INT48_M      0x000000E0  // Interrupt 48 Priority Mask
#define NVIC_PRI12_INT51_S      29
#define NVIC_PRI12_INT50_S      21
#define NVIC_PRI12_INT49_S      13
#define NVIC_PRI12_INT48_S      5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI13 register.
//
//*****************************************************************************
#define NVIC_PRI13_INT55_M      0xE0000000  // Interrupt 55 Priority Mask
#define NVIC_PRI13_INT54_M      0x00E00000  // Interrupt 54 Priority Mask
#define NVIC_PRI13_INT53_M      0x0000E000  // Interrupt 53 Priority Mask
#define NVIC_PRI13_INT52_M      0x000000E0  // Interrupt 52 Priority Mask
#define NVIC_PRI13_INT55_S      29
#define NVIC_PRI13_INT54_S      21
#define NVIC_PRI13_INT53_S      13
#define NVIC_PRI13_INT52_S      5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI14 register.
//
//*****************************************************************************
#define NVIC_PRI14_INTD_M       0xE0000000  // Interrupt 59 Priority Mask
#define NVIC_PRI14_INTC_M       0x00E00000  // Interrupt 58 Priority Mask
#define NVIC_PRI14_INTB_M       0x0000E000  // Interrupt 57 Priority Mask
#define NVIC_PRI14_INTA_M       0x000000E0  // Interrupt 56 Priority Mask
#define NVIC_PRI14_INTD_S       29
#define NVIC_PRI14_INTC_S       21
#define NVIC_PRI14_INTB_S       13
#define NVIC_PRI14_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI15 register.
//
//*****************************************************************************
#define NVIC_PRI15_INTD_M       0xE0000000  // Interrupt 63 Priority Mask
#define NVIC_PRI15_INTC_M       0x00E00000  // Interrupt 62 Priority Mask
#define NVIC_PRI15_INTB_M       0x0000E000  // Interrupt 61 Priority Mask
#define NVIC_PRI15_INTA_M       0x000000E0  // Interrupt 60 Priority Mask
#define NVIC_PRI15_INTD_S       29
#define NVIC_PRI15_INTC_S       21
#define NVIC_PRI15_INTB_S       13
#define NVIC_PRI15_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI16 register.
//
//*****************************************************************************
#define NVIC_PRI16_INTD_M       0xE0000000  // Interrupt 67 Priority Mask
#define NVIC_PRI16_INTC_M       0x00E00000  // Interrupt 66 Priority Mask
#define NVIC_PRI16_INTB_M       0x0000E000  // Interrupt 65 Priority Mask
#define NVIC_PRI16_INTA_M       0x000000E0  // Interrupt 64 Priority Mask
#define NVIC_PRI16_INTD_S       29
#define NVIC_PRI16_INTC_S       21
#define NVIC_PRI16_INTB_S       13
#define NVIC_PRI16_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI17 register.
//
//*****************************************************************************
#define NVIC_PRI17_INTD_M       0xE0000000  // Interrupt 71 Priority Mask
#define NVIC_PRI17_INTC_M       0x00E00000  // Interrupt 70 Priority Mask
#define NVIC_PRI17_INTB_M       0x0000E000  // Interrupt 69 Priority Mask
#define NVIC_PRI17_INTA_M       0x000000E0  // Interrupt 68 Priority Mask
#define NVIC_PRI17_INTD_S       29
#define NVIC_PRI17_INTC_S       21
#define NVIC_PRI17_INTB_S       13
#define NVIC_PRI17_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI18 register.
//
//*****************************************************************************
#define NVIC_PRI18_INTD_M       0xE0000000  // Interrupt 75 Priority Mask
#define NVIC_PRI18_INTC_M       0x00E00000  // Interrupt 74 Priority Mask
#define NVIC_PRI18_INTB_M       0x0000E000  // Interrupt 73 Priority Mask
#define NVIC_PRI18_INTA_M       0x000000E0  // Interrupt 72 Priority Mask
#define NVIC_PRI18_INTD_S       29
#define NVIC_PRI18_INTC_S       21
#define NVIC_PRI18_INTB_S       13
#define NVIC_PRI18_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI19 register.
//
//*****************************************************************************
#define NVIC_PRI19_INTD_M       0xE0000000  // Interrupt 79 Priority Mask
#define NVIC_PRI19_INTC_M       0x00E00000  // Interrupt 78 Priority Mask
#define NVIC_PRI19_INTB_M       0x0000E000  // Interrupt 77 Priority Mask
#define NVIC_PRI19_INTA_M       0x000000E0  // Interrupt 76 Priority Mask
#define NVIC_PRI19_INTD_S       29
#define NVIC_PRI19_INTC_S       21
#define NVIC_PRI19_INTB_S       13
#define NVIC_PRI19_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI20 register.
//
//*****************************************************************************
#define NVIC_PRI20_INTD_M       0xE0000000  // Interrupt 83 Priority Mask
#define NVIC_PRI20_INTC_M       0x00E00000  // Interrupt 82 Priority Mask
#define NVIC_PRI20_INTB_M       0x0000E000  // Interrupt 81 Priority Mask
#define NVIC_PRI20_INTA_M       0x000000E0  // Interrupt 80 Priority Mask
#define NVIC_PRI20_INTD_S       29
#define NVIC_PRI20_INTC_S       21
#define NVIC_PRI20_INTB_S       13
#define NVIC_PRI20_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI21 register.
//
//*****************************************************************************
#define NVIC_PRI21_INTD_M       0xE0000000  // Interrupt 87 Priority Mask
#define NVIC_PRI21_INTC_M       0x00E00000  // Interrupt 86 Priority Mask
#define NVIC_PRI21_INTB_M       0x0000E000  // Interrupt 85 Priority Mask
#define NVIC_PRI21_INTA_M       0x000000E0  // Interrupt 84 Priority Mask
#define NVIC_PRI21_INTD_S       29
#define NVIC_PRI21_INTC_S       21
#define NVIC_PRI21_INTB_S       13
#define NVIC_PRI21_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI22 register.
//
//*****************************************************************************
#define NVIC_PRI22_INTD_M       0xE0000000  // Interrupt 91 Priority Mask
#define NVIC_PRI22_INTC_M       0x00E00000  // Interrupt 90 Priority Mask
#define NVIC_PRI22_INTB_M       0x0000E000  // Interrupt 89 Priority Mask
#define NVIC_PRI22_INTA_M       0x000000E0  // Interrupt 88 Priority Mask
#define NVIC_PRI22_INTD_S       29
#define NVIC_PRI22_INTC_S       21
#define NVIC_PRI22_INTB_S       13
#define NVIC_PRI22_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI23 register.
//
//*****************************************************************************
#define NVIC_PRI23_INTD_M       0xE0000000  // Interrupt 95 Priority Mask
#define NVIC_PRI23_INTC_M       0x00E00000  // Interrupt 94 Priority Mask
#define NVIC_PRI23_INTB_M       0x0000E000  // Interrupt 93 Priority Mask
#define NVIC_PRI23_INTA_M       0x000000E0  // Interrupt 92 Priority Mask
#define NVIC_PRI23_INTD_S       29
#define NVIC_PRI23_INTC_S       21
#define NVIC_PRI23_INTB_S       13
#define NVIC_PRI23_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI24 register.
//
//*****************************************************************************
#define NVIC_PRI24_INTD_M       0xE0000000  // Interrupt 99 Priority Mask
#define NVIC_PRI24_INTC_M       0x00E00000  // Interrupt 98 Priority Mask
#define NVIC_PRI24_INTB_M       0x0000E000  // Interrupt 97 Priority Mask
#define NVIC_PRI24_INTA_M       0x000000E0  // Interrupt 96 Priority Mask
#define NVIC_PRI24_INTD_S       29
#define NVIC_PRI24_INTC_S       21
#define NVIC_PRI24_INTB_S       13
#define NVIC_PRI24_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI25 register.
//
//*****************************************************************************
#define NVIC_PRI25_INTD_M       0xE0000000  // Interrupt 103 Priority Mask
#define NVIC_PRI25_INTC_M       0x00E00000  // Interrupt 102 Priority Mask
#define NVIC_PRI25_INTB_M       0x0000E000  // Interrupt 101 Priority Mask
#define NVIC_PRI25_INTA_M       0x000000E0  // Interrupt 100 Priority Mask
#define NVIC_PRI25_INTD_S       29
#define NVIC_PRI25_INTC_S       21
#define NVIC_PRI25_INTB_S       13
#define NVIC_PRI25_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI26 register.
//
//*****************************************************************************
#define NVIC_PRI26_INTD_M       0xE0000000  // Interrupt 107 Priority Mask
#define NVIC_PRI26_INTC_M       0x00E00000  // Interrupt 106 Priority Mask
#define NVIC_PRI26_INTB_M       0x0000E000  // Interrupt 105 Priority Mask
#define NVIC_PRI26_INTA_M       0x000000E0  // Interrupt 104 Priority Mask
#define NVIC_PRI26_INTD_S       29
#define NVIC_PRI26_INTC_S       21
#define NVIC_PRI26_INTB_S       13
#define NVIC_PRI26_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI27 register.
//
//*****************************************************************************
#define NVIC_PRI27_INTD_M       0xE0000000  // Interrupt 111 Priority Mask
#define NVIC_PRI27_INTC_M       0x00E00000  // Interrupt 110 Priority Mask
#define NVIC_PRI27_INTB_M       0x0000E000  // Interrupt 109 Priority Mask
#define NVIC_PRI27_INTA_M       0x000000E0  // Interrupt 108 Priority Mask
#define NVIC_PRI27_INTD_S       29
#define NVIC_PRI27_INTC_S       21
#define NVIC_PRI27_INTB_S       13
#define NVIC_PRI27_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI28 register.
//
//*****************************************************************************
#define NVIC_PRI28_INTD_M       0xE0000000  // Interrupt 115 Priority Mask
#define NVIC_PRI28_INTC_M       0x00E00000  // Interrupt 114 Priority Mask
#define NVIC_PRI28_INTB_M       0x0000E000  // Interrupt 113 Priority Mask
#define NVIC_PRI28_INTA_M       0x000000E0  // Interrupt 112 Priority Mask
#define NVIC_PRI28_INTD_S       29
#define NVIC_PRI28_INTC_S       21
#define NVIC_PRI28_INTB_S       13
#define NVIC_PRI28_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI29 register.
//
//*****************************************************************************
#define NVIC_PRI29_INTD_M       0xE0000000  // Interrupt 119 Priority Mask
#define NVIC_PRI29_INTC_M       0x00E00000  // Interrupt 118 Priority Mask
#define NVIC_PRI29_INTB_M       0x0000E000  // Interrupt 117 Priority Mask
#define NVIC_PRI29_INTA_M       0x000000E0  // Interrupt 116 Priority Mask
#define NVIC_PRI29_INTD_S       29
#define NVIC_PRI29_INTC_S       21
#define NVIC_PRI29_INTB_S       13
#define NVIC_PRI29_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI30 register.
//
//*****************************************************************************
#define NVIC_PRI30_INTD_M       0xE0000000  // Interrupt 123 Priority Mask
#define NVIC_PRI30_INTC_M       0x00E00000  // Interrupt 122 Priority Mask
#define NVIC_PRI30_INTB_M       0x0000E000  // Interrupt 121 Priority Mask
#define NVIC_PRI30_INTA_M       0x000000E0  // Interrupt 120 Priority Mask
#define NVIC_PRI30_INTD_S       29
#define NVIC_PRI30_INTC_S       21
#define NVIC_PRI30_INTB_S       13
#define NVIC_PRI30_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI31 register.
//
//*****************************************************************************
#define NVIC_PRI31_INTD_M       0xE0000000  // Interrupt 127 Priority Mask
#define NVIC_PRI31_INTC_M       0x00E00000  // Interrupt 126 Priority Mask
#define NVIC_PRI31_INTB_M       0x0000E000  // Interrupt 125 Priority Mask
#define NVIC_PRI31_INTA_M       0x000000E0  // Interrupt 124 Priority Mask
#define NVIC_PRI31_INTD_S       29
#define NVIC_PRI31_INTC_S       21
#define NVIC_PRI31_INTB_S       13
#define NVIC_PRI31_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI32 register.
//
//*****************************************************************************
#define NVIC_PRI32_INTD_M       0xE0000000  // Interrupt 131 Priority Mask
#define NVIC_PRI32_INTC_M       0x00E00000  // Interrupt 130 Priority Mask
#define NVIC_PRI32_INTB_M       0x0000E000  // Interrupt 129 Priority Mask
#define NVIC_PRI32_INTA_M       0x000000E0  // Interrupt 128 Priority Mask
#define NVIC_PRI32_INTD_S       29
#define NVIC_PRI32_INTC_S       21
#define NVIC_PRI32_INTB_S       13
#define NVIC_PRI32_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI33 register.
//
//*****************************************************************************
#define NVIC_PRI33_INTD_M       0xE0000000  // Interrupt Priority for Interrupt
                                            // [4n+3]
#define NVIC_PRI33_INTC_M       0x00E00000  // Interrupt Priority for Interrupt
                                            // [4n+2]
#define NVIC_PRI33_INTB_M       0x0000E000  // Interrupt Priority for Interrupt
                                            // [4n+1]
#define NVIC_PRI33_INTA_M       0x000000E0  // Interrupt Priority for Interrupt
                                            // [4n]
#define NVIC_PRI33_INTD_S       29
#define NVIC_PRI33_INTC_S       21
#define NVIC_PRI33_INTB_S       13
#define NVIC_PRI33_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI34 register.
//
//*****************************************************************************
#define NVIC_PRI34_INTD_M       0xE0000000  // Interrupt Priority for Interrupt
                                            // [4n+3]
#define NVIC_PRI34_INTC_M       0x00E00000  // Interrupt Priority for Interrupt
                                            // [4n+2]
#define NVIC_PRI34_INTB_M       0x0000E000  // Interrupt Priority for Interrupt
                                            // [4n+1]
#define NVIC_PRI34_INTA_M       0x000000E0  // Interrupt Priority for Interrupt
                                            // [4n]
#define NVIC_PRI34_INTD_S       29
#define NVIC_PRI34_INTC_S       21
#define NVIC_PRI34_INTB_S       13
#define NVIC_PRI34_INTA_S       5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_CPUID register.
//
//*****************************************************************************
#define NVIC_CPUID_IMP_M        0xFF000000  // Implementer Code
#define NVIC_CPUID_IMP_ARM      0x41000000  // ARM
#define NVIC_CPUID_VAR_M        0x00F00000  // Variant Number
#define NVIC_CPUID_CON_M        0x000F0000  // Constant
#define NVIC_CPUID_PARTNO_M     0x0000FFF0  // Part Number
#define NVIC_CPUID_PARTNO_CM4   0x0000C240  // Cortex-M4 processor
#define NVIC_CPUID_REV_M        0x0000000F  // Revision Number

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_INT_CTRL register.
//
//*****************************************************************************
#define NVIC_INT_CTRL_NMI_SET   0x80000000  // NMI Set Pending
#define NVIC_INT_CTRL_PEND_SV   0x10000000  // PendSV Set Pending
#define NVIC_INT_CTRL_UNPEND_SV 0x08000000  // PendSV Clear Pending
#define NVIC_INT_CTRL_PENDSTSET 0x04000000  // SysTick Set Pending
#define NVIC_INT_CTRL_PENDSTCLR 0x02000000  // SysTick Clear Pending
#define NVIC_INT_CTRL_ISR_PRE   0x00800000  // Debug Interrupt Handling
#define NVIC_INT_CTRL_ISR_PEND  0x00400000  // Interrupt Pending
#define NVIC_INT_CTRL_VEC_PEN_M 0x000FF000  // Interrupt Pending Vector Number
#define NVIC_INT_CTRL_VEC_PEN_NMI                                             \
                                0x00002000  // NMI
#define NVIC_INT_CTRL_VEC_PEN_HARD                                            \
                                0x00003000  // Hard fault
#define NVIC_INT_CTRL_VEC_PEN_MEM                                             \
                                0x00004000  // Memory management fault
#define NVIC_INT_CTRL_VEC_PEN_BUS                                             \
                                0x00005000  // Bus fault
#define NVIC_INT_CTRL_VEC_PEN_USG                                             \
                                0x00006000  // Usage fault
#define NVIC_INT_CTRL_VEC_PEN_SVC                                             \
                                0x0000B000  // SVCall
#define NVIC_INT_CTRL_VEC_PEN_PNDSV                                           \
                                0x0000E000  // PendSV
#define NVIC_INT_CTRL_VEC_PEN_TICK                                            \
                                0x0000F000  // SysTick
#define NVIC_INT_CTRL_RET_BASE  0x00000800  // Return to Base
#define NVIC_INT_CTRL_VEC_ACT_M 0x000000FF  // Interrupt Pending Vector Number
#define NVIC_INT_CTRL_VEC_ACT_S 0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_VTABLE register.
//
//*****************************************************************************
#define NVIC_VTABLE_OFFSET_M    0xFFFFFC00  // Vector Table Offset
#define NVIC_VTABLE_OFFSET_S    10

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_APINT register.
//
//*****************************************************************************
#define NVIC_APINT_VECTKEY_M    0xFFFF0000  // Register Key
#define NVIC_APINT_VECTKEY      0x05FA0000  // Vector key
#define NVIC_APINT_ENDIANESS    0x00008000  // Data Endianess
#define NVIC_APINT_PRIGROUP_M   0x00000700  // Interrupt Priority Grouping
#define NVIC_APINT_PRIGROUP_7_1 0x00000000  // Priority group 7.1 split
#define NVIC_APINT_PRIGROUP_6_2 0x00000100  // Priority group 6.2 split
#define NVIC_APINT_PRIGROUP_5_3 0x00000200  // Priority group 5.3 split
#define NVIC_APINT_PRIGROUP_4_4 0x00000300  // Priority group 4.4 split
#define NVIC_APINT_PRIGROUP_3_5 0x00000400  // Priority group 3.5 split
#define NVIC_APINT_PRIGROUP_2_6 0x00000500  // Priority group 2.6 split
#define NVIC_APINT_PRIGROUP_1_7 0x00000600  // Priority group 1.7 split
#define NVIC_APINT_PRIGROUP_0_8 0x00000700  // Priority group 0.8 split
#define NVIC_APINT_SYSRESETREQ  0x00000004  // System Reset Request
#define NVIC_APINT_VECT_CLR_ACT 0x00000002  // Clear Active NMI / Fault
#define NVIC_APINT_VECT_RESET   0x00000001  // System Reset

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_CTRL register.
//
//*****************************************************************************
#define NVIC_SYS_CTRL_SEVONPEND 0x00000010  // Wake Up on Pending
#define NVIC_SYS_CTRL_SLEEPDEEP 0x00000004  // Deep Sleep Enable
#define NVIC_SYS_CTRL_SLEEPEXIT 0x00000002  // Sleep on ISR Exit

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_CFG_CTRL register.
//
//*****************************************************************************
#define NVIC_CFG_CTRL_STKALIGN  0x00000200  // Stack Alignment on Exception
                                            // Entry
#define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100  // Ignore Bus Fault in NMI and
                                            // Fault
#define NVIC_CFG_CTRL_DIV0      0x00000010  // Trap on Divide by 0
#define NVIC_CFG_CTRL_UNALIGNED 0x00000008  // Trap on Unaligned Access
#define NVIC_CFG_CTRL_MAIN_PEND 0x00000002  // Allow Main Interrupt Trigger
#define NVIC_CFG_CTRL_BASE_THR  0x00000001  // Thread State Control

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI1 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI1_USAGE_M   0x00E00000  // Usage Fault Priority
#define NVIC_SYS_PRI1_BUS_M     0x0000E000  // Bus Fault Priority
#define NVIC_SYS_PRI1_MEM_M     0x000000E0  // Memory Management Fault Priority
#define NVIC_SYS_PRI1_USAGE_S   21
#define NVIC_SYS_PRI1_BUS_S     13
#define NVIC_SYS_PRI1_MEM_S     5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI2 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI2_SVC_M     0xE0000000  // SVCall Priority
#define NVIC_SYS_PRI2_SVC_S     29

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI3 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI3_TICK_M    0xE0000000  // SysTick Exception Priority
#define NVIC_SYS_PRI3_PENDSV_M  0x00E00000  // PendSV Priority
#define NVIC_SYS_PRI3_DEBUG_M   0x000000E0  // Debug Priority
#define NVIC_SYS_PRI3_TICK_S    29
#define NVIC_SYS_PRI3_PENDSV_S  21
#define NVIC_SYS_PRI3_DEBUG_S   5

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_HND_CTRL
// register.
//
//*****************************************************************************
#define NVIC_SYS_HND_CTRL_USAGE 0x00040000  // Usage Fault Enable
#define NVIC_SYS_HND_CTRL_BUS   0x00020000  // Bus Fault Enable
#define NVIC_SYS_HND_CTRL_MEM   0x00010000  // Memory Management Fault Enable
#define NVIC_SYS_HND_CTRL_SVC   0x00008000  // SVC Call Pending
#define NVIC_SYS_HND_CTRL_BUSP  0x00004000  // Bus Fault Pending
#define NVIC_SYS_HND_CTRL_MEMP  0x00002000  // Memory Management Fault Pending
#define NVIC_SYS_HND_CTRL_USAGEP                                              \
                                0x00001000  // Usage Fault Pending
#define NVIC_SYS_HND_CTRL_TICK  0x00000800  // SysTick Exception Active
#define NVIC_SYS_HND_CTRL_PNDSV 0x00000400  // PendSV Exception Active
#define NVIC_SYS_HND_CTRL_MON   0x00000100  // Debug Monitor Active
#define NVIC_SYS_HND_CTRL_SVCA  0x00000080  // SVC Call Active
#define NVIC_SYS_HND_CTRL_USGA  0x00000008  // Usage Fault Active
#define NVIC_SYS_HND_CTRL_BUSA  0x00000002  // Bus Fault Active
#define NVIC_SYS_HND_CTRL_MEMA  0x00000001  // Memory Management Fault Active

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FAULT_STAT
// register.
//
//*****************************************************************************
#define NVIC_FAULT_STAT_DIV0    0x02000000  // Divide-by-Zero Usage Fault
#define NVIC_FAULT_STAT_UNALIGN 0x01000000  // Unaligned Access Usage Fault
#define NVIC_FAULT_STAT_NOCP    0x00080000  // No Coprocessor Usage Fault
#define NVIC_FAULT_STAT_INVPC   0x00040000  // Invalid PC Load Usage Fault
#define NVIC_FAULT_STAT_INVSTAT 0x00020000  // Invalid State Usage Fault
#define NVIC_FAULT_STAT_UNDEF   0x00010000  // Undefined Instruction Usage
                                            // Fault
#define NVIC_FAULT_STAT_BFARV   0x00008000  // Bus Fault Address Register Valid
#define NVIC_FAULT_STAT_BLSPERR 0x00002000  // Bus Fault on Floating-Point Lazy
                                            // State Preservation
#define NVIC_FAULT_STAT_BSTKE   0x00001000  // Stack Bus Fault
#define NVIC_FAULT_STAT_BUSTKE  0x00000800  // Unstack Bus Fault
#define NVIC_FAULT_STAT_IMPRE   0x00000400  // Imprecise Data Bus Error
#define NVIC_FAULT_STAT_PRECISE 0x00000200  // Precise Data Bus Error
#define NVIC_FAULT_STAT_IBUS    0x00000100  // Instruction Bus Error
#define NVIC_FAULT_STAT_MMARV   0x00000080  // Memory Management Fault Address
                                            // Register Valid
#define NVIC_FAULT_STAT_MLSPERR 0x00000020  // Memory Management Fault on
                                            // Floating-Point Lazy State
                                            // Preservation
#define NVIC_FAULT_STAT_MSTKE   0x00000010  // Stack Access Violation
#define NVIC_FAULT_STAT_MUSTKE  0x00000008  // Unstack Access Violation
#define NVIC_FAULT_STAT_DERR    0x00000002  // Data Access Violation
#define NVIC_FAULT_STAT_IERR    0x00000001  // Instruction Access Violation

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_HFAULT_STAT
// register.
//
//*****************************************************************************
#define NVIC_HFAULT_STAT_DBG    0x80000000  // Debug Event
#define NVIC_HFAULT_STAT_FORCED 0x40000000  // Forced Hard Fault
#define NVIC_HFAULT_STAT_VECT   0x00000002  // Vector Table Read Fault

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DEBUG_STAT
// register.
//
//*****************************************************************************
#define NVIC_DEBUG_STAT_EXTRNL  0x00000010  // EDBGRQ asserted
#define NVIC_DEBUG_STAT_VCATCH  0x00000008  // Vector catch
#define NVIC_DEBUG_STAT_DWTTRAP 0x00000004  // DWT match
#define NVIC_DEBUG_STAT_BKPT    0x00000002  // Breakpoint instruction
#define NVIC_DEBUG_STAT_HALTED  0x00000001  // Halt request

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MM_ADDR register.
//
//*****************************************************************************
#define NVIC_MM_ADDR_M          0xFFFFFFFF  // Fault Address
#define NVIC_MM_ADDR_S          0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FAULT_ADDR
// register.
//
//*****************************************************************************
#define NVIC_FAULT_ADDR_M       0xFFFFFFFF  // Fault Address
#define NVIC_FAULT_ADDR_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_CPAC register.
//
//*****************************************************************************
#define NVIC_CPAC_CP11_M        0x00C00000  // CP11 Coprocessor Access
                                            // Privilege
#define NVIC_CPAC_CP11_DIS      0x00000000  // Access Denied
#define NVIC_CPAC_CP11_PRIV     0x00400000  // Privileged Access Only
#define NVIC_CPAC_CP11_FULL     0x00C00000  // Full Access
#define NVIC_CPAC_CP10_M        0x00300000  // CP10 Coprocessor Access
                                            // Privilege
#define NVIC_CPAC_CP10_DIS      0x00000000  // Access Denied
#define NVIC_CPAC_CP10_PRIV     0x00100000  // Privileged Access Only
#define NVIC_CPAC_CP10_FULL     0x00300000  // Full Access

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_TYPE register.
//
//*****************************************************************************
#define NVIC_MPU_TYPE_IREGION_M 0x00FF0000  // Number of I Regions
#define NVIC_MPU_TYPE_DREGION_M 0x0000FF00  // Number of D Regions
#define NVIC_MPU_TYPE_SEPARATE  0x00000001  // Separate or Unified MPU
#define NVIC_MPU_TYPE_IREGION_S 16
#define NVIC_MPU_TYPE_DREGION_S 8

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_CTRL register.
//
//*****************************************************************************
#define NVIC_MPU_CTRL_PRIVDEFEN 0x00000004  // MPU Default Region
#define NVIC_MPU_CTRL_HFNMIENA  0x00000002  // MPU Enabled During Faults
#define NVIC_MPU_CTRL_ENABLE    0x00000001  // MPU Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_NUMBER
// register.
//
//*****************************************************************************
#define NVIC_MPU_NUMBER_M       0x00000007  // MPU Region to Access
#define NVIC_MPU_NUMBER_S       0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_BASE register.
//
//*****************************************************************************
#define NVIC_MPU_BASE_ADDR_M    0xFFFFFFE0  // Base Address Mask
#define NVIC_MPU_BASE_VALID     0x00000010  // Region Number Valid
#define NVIC_MPU_BASE_REGION_M  0x00000007  // Region Number
#define NVIC_MPU_BASE_ADDR_S    5
#define NVIC_MPU_BASE_REGION_S  0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_ATTR register.
//
//*****************************************************************************
#define NVIC_MPU_ATTR_XN        0x10000000  // Instruction Access Disable
#define NVIC_MPU_ATTR_AP_M      0x07000000  // Access Privilege
#define NVIC_MPU_ATTR_TEX_M     0x00380000  // Type Extension Mask
#define NVIC_MPU_ATTR_SHAREABLE 0x00040000  // Shareable
#define NVIC_MPU_ATTR_CACHEABLE 0x00020000  // Cacheable
#define NVIC_MPU_ATTR_BUFFRABLE 0x00010000  // Bufferable
#define NVIC_MPU_ATTR_SRD_M     0x0000FF00  // Subregion Disable Bits
#define NVIC_MPU_ATTR_SIZE_M    0x0000003E  // Region Size Mask
#define NVIC_MPU_ATTR_ENABLE    0x00000001  // Region Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_BASE1 register.
//
//*****************************************************************************
#define NVIC_MPU_BASE1_ADDR_M   0xFFFFFFE0  // Base Address Mask
#define NVIC_MPU_BASE1_VALID    0x00000010  // Region Number Valid
#define NVIC_MPU_BASE1_REGION_M 0x00000007  // Region Number
#define NVIC_MPU_BASE1_ADDR_S   5
#define NVIC_MPU_BASE1_REGION_S 0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_ATTR1 register.
//
//*****************************************************************************
#define NVIC_MPU_ATTR1_XN       0x10000000  // Instruction Access Disable
#define NVIC_MPU_ATTR1_AP_M     0x07000000  // Access Privilege
#define NVIC_MPU_ATTR1_TEX_M    0x00380000  // Type Extension Mask
#define NVIC_MPU_ATTR1_SHAREABLE                                              \
                                0x00040000  // Shareable
#define NVIC_MPU_ATTR1_CACHEABLE                                              \
                                0x00020000  // Cacheable
#define NVIC_MPU_ATTR1_BUFFRABLE                                              \
                                0x00010000  // Bufferable
#define NVIC_MPU_ATTR1_SRD_M    0x0000FF00  // Subregion Disable Bits
#define NVIC_MPU_ATTR1_SIZE_M   0x0000003E  // Region Size Mask
#define NVIC_MPU_ATTR1_ENABLE   0x00000001  // Region Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_BASE2 register.
//
//*****************************************************************************
#define NVIC_MPU_BASE2_ADDR_M   0xFFFFFFE0  // Base Address Mask
#define NVIC_MPU_BASE2_VALID    0x00000010  // Region Number Valid
#define NVIC_MPU_BASE2_REGION_M 0x00000007  // Region Number
#define NVIC_MPU_BASE2_ADDR_S   5
#define NVIC_MPU_BASE2_REGION_S 0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_ATTR2 register.
//
//*****************************************************************************
#define NVIC_MPU_ATTR2_XN       0x10000000  // Instruction Access Disable
#define NVIC_MPU_ATTR2_AP_M     0x07000000  // Access Privilege
#define NVIC_MPU_ATTR2_TEX_M    0x00380000  // Type Extension Mask
#define NVIC_MPU_ATTR2_SHAREABLE                                              \
                                0x00040000  // Shareable
#define NVIC_MPU_ATTR2_CACHEABLE                                              \
                                0x00020000  // Cacheable
#define NVIC_MPU_ATTR2_BUFFRABLE                                              \
                                0x00010000  // Bufferable
#define NVIC_MPU_ATTR2_SRD_M    0x0000FF00  // Subregion Disable Bits
#define NVIC_MPU_ATTR2_SIZE_M   0x0000003E  // Region Size Mask
#define NVIC_MPU_ATTR2_ENABLE   0x00000001  // Region Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_BASE3 register.
//
//*****************************************************************************
#define NVIC_MPU_BASE3_ADDR_M   0xFFFFFFE0  // Base Address Mask
#define NVIC_MPU_BASE3_VALID    0x00000010  // Region Number Valid
#define NVIC_MPU_BASE3_REGION_M 0x00000007  // Region Number
#define NVIC_MPU_BASE3_ADDR_S   5
#define NVIC_MPU_BASE3_REGION_S 0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_ATTR3 register.
//
//*****************************************************************************
#define NVIC_MPU_ATTR3_XN       0x10000000  // Instruction Access Disable
#define NVIC_MPU_ATTR3_AP_M     0x07000000  // Access Privilege
#define NVIC_MPU_ATTR3_TEX_M    0x00380000  // Type Extension Mask
#define NVIC_MPU_ATTR3_SHAREABLE                                              \
                                0x00040000  // Shareable
#define NVIC_MPU_ATTR3_CACHEABLE                                              \
                                0x00020000  // Cacheable
#define NVIC_MPU_ATTR3_BUFFRABLE                                              \
                                0x00010000  // Bufferable
#define NVIC_MPU_ATTR3_SRD_M    0x0000FF00  // Subregion Disable Bits
#define NVIC_MPU_ATTR3_SIZE_M   0x0000003E  // Region Size Mask
#define NVIC_MPU_ATTR3_ENABLE   0x00000001  // Region Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_CTRL register.
//
//*****************************************************************************
#define NVIC_DBG_CTRL_DBGKEY_M  0xFFFF0000  // Debug key mask
#define NVIC_DBG_CTRL_DBGKEY    0xA05F0000  // Debug key
#define NVIC_DBG_CTRL_S_RESET_ST                                              \
                                0x02000000  // Core has reset since last read
#define NVIC_DBG_CTRL_S_RETIRE_ST                                             \
                                0x01000000  // Core has executed insruction
                                            // since last read
#define NVIC_DBG_CTRL_S_LOCKUP  0x00080000  // Core is locked up
#define NVIC_DBG_CTRL_S_SLEEP   0x00040000  // Core is sleeping
#define NVIC_DBG_CTRL_S_HALT    0x00020000  // Core status on halt
#define NVIC_DBG_CTRL_S_REGRDY  0x00010000  // Register read/write available
#define NVIC_DBG_CTRL_C_SNAPSTALL                                             \
                                0x00000020  // Breaks a stalled load/store
#define NVIC_DBG_CTRL_C_MASKINT 0x00000008  // Mask interrupts when stepping
#define NVIC_DBG_CTRL_C_STEP    0x00000004  // Step the core
#define NVIC_DBG_CTRL_C_HALT    0x00000002  // Halt the core
#define NVIC_DBG_CTRL_C_DEBUGEN 0x00000001  // Enable debug

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_XFER register.
//
//*****************************************************************************
#define NVIC_DBG_XFER_REG_WNR   0x00010000  // Write or not read
#define NVIC_DBG_XFER_REG_SEL_M 0x0000001F  // Register
#define NVIC_DBG_XFER_REG_R0    0x00000000  // Register R0
#define NVIC_DBG_XFER_REG_R1    0x00000001  // Register R1
#define NVIC_DBG_XFER_REG_R2    0x00000002  // Register R2
#define NVIC_DBG_XFER_REG_R3    0x00000003  // Register R3
#define NVIC_DBG_XFER_REG_R4    0x00000004  // Register R4
#define NVIC_DBG_XFER_REG_R5    0x00000005  // Register R5
#define NVIC_DBG_XFER_REG_R6    0x00000006  // Register R6
#define NVIC_DBG_XFER_REG_R7    0x00000007  // Register R7
#define NVIC_DBG_XFER_REG_R8    0x00000008  // Register R8
#define NVIC_DBG_XFER_REG_R9    0x00000009  // Register R9
#define NVIC_DBG_XFER_REG_R10   0x0000000A  // Register R10
#define NVIC_DBG_XFER_REG_R11   0x0000000B  // Register R11
#define NVIC_DBG_XFER_REG_R12   0x0000000C  // Register R12
#define NVIC_DBG_XFER_REG_R13   0x0000000D  // Register R13
#define NVIC_DBG_XFER_REG_R14   0x0000000E  // Register R14
#define NVIC_DBG_XFER_REG_R15   0x0000000F  // Register R15
#define NVIC_DBG_XFER_REG_FLAGS 0x00000010  // xPSR/Flags register
#define NVIC_DBG_XFER_REG_MSP   0x00000011  // Main SP
#define NVIC_DBG_XFER_REG_PSP   0x00000012  // Process SP
#define NVIC_DBG_XFER_REG_DSP   0x00000013  // Deep SP
#define NVIC_DBG_XFER_REG_CFBP  0x00000014  // Control/Fault/BasePri/PriMask

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_DATA register.
//
//*****************************************************************************
#define NVIC_DBG_DATA_M         0xFFFFFFFF  // Data temporary cache
#define NVIC_DBG_DATA_S         0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_INT register.
//
//*****************************************************************************
#define NVIC_DBG_INT_HARDERR    0x00000400  // Debug trap on hard fault
#define NVIC_DBG_INT_INTERR     0x00000200  // Debug trap on interrupt errors
#define NVIC_DBG_INT_BUSERR     0x00000100  // Debug trap on bus error
#define NVIC_DBG_INT_STATERR    0x00000080  // Debug trap on usage fault state
#define NVIC_DBG_INT_CHKERR     0x00000040  // Debug trap on usage fault check
#define NVIC_DBG_INT_NOCPERR    0x00000020  // Debug trap on coprocessor error
#define NVIC_DBG_INT_MMERR      0x00000010  // Debug trap on mem manage fault
#define NVIC_DBG_INT_RESET      0x00000008  // Core reset status
#define NVIC_DBG_INT_RSTPENDCLR 0x00000004  // Clear pending core reset
#define NVIC_DBG_INT_RSTPENDING 0x00000002  // Core reset is pending
#define NVIC_DBG_INT_RSTVCATCH  0x00000001  // Reset vector catch

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SW_TRIG register.
//
//*****************************************************************************
#define NVIC_SW_TRIG_INTID_M    0x000000FF  // Interrupt ID
#define NVIC_SW_TRIG_INTID_S    0

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FPCC register.
//
//*****************************************************************************
#define NVIC_FPCC_ASPEN         0x80000000  // Automatic State Preservation
                                            // Enable
#define NVIC_FPCC_LSPEN         0x40000000  // Lazy State Preservation Enable
#define NVIC_FPCC_MONRDY        0x00000100  // Monitor Ready
#define NVIC_FPCC_BFRDY         0x00000040  // Bus Fault Ready
#define NVIC_FPCC_MMRDY         0x00000020  // Memory Management Fault Ready
#define NVIC_FPCC_HFRDY         0x00000010  // Hard Fault Ready
#define NVIC_FPCC_THREAD        0x00000008  // Thread Mode
#define NVIC_FPCC_USER          0x00000002  // User Privilege Level
#define NVIC_FPCC_LSPACT        0x00000001  // Lazy State Preservation Active

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FPCA register.
//
//*****************************************************************************
#define NVIC_FPCA_ADDRESS_M     0xFFFFFFF8  // Address
#define NVIC_FPCA_ADDRESS_S     3

//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FPDSC register.
//
//*****************************************************************************
#define NVIC_FPDSC_AHP          0x04000000  // AHP Bit Default
#define NVIC_FPDSC_DN           0x02000000  // DN Bit Default
#define NVIC_FPDSC_FZ           0x01000000  // FZ Bit Default
#define NVIC_FPDSC_RMODE_M      0x00C00000  // RMODE Bit Default
#define NVIC_FPDSC_RMODE_RN     0x00000000  // Round to Nearest (RN) mode
#define NVIC_FPDSC_RMODE_RP     0x00400000  // Round towards Plus Infinity (RP)
                                            // mode
#define NVIC_FPDSC_RMODE_RM     0x00800000  // Round towards Minus Infinity
                                            // (RM) mode
#define NVIC_FPDSC_RMODE_RZ     0x00C00000  // Round towards Zero (RZ) mode

//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED
#define SYSCTL_DID0_CLASS_BLIZZARD                                            \
                                0x00050000  // Tiva(TM) C Series TM4C123-class
                                            // microcontrollers

#endif

#endif // __TM4C1230E6PM_H__