diff options
Diffstat (limited to 'testhal/STM32/STM32L0xx/COMP/mcuconf.h')
| -rw-r--r-- | testhal/STM32/STM32L0xx/COMP/mcuconf.h | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/testhal/STM32/STM32L0xx/COMP/mcuconf.h b/testhal/STM32/STM32L0xx/COMP/mcuconf.h new file mode 100644 index 0000000..42e5cf0 --- /dev/null +++ b/testhal/STM32/STM32L0xx/COMP/mcuconf.h @@ -0,0 +1,216 @@ +/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32L0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32L0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_VOS STM32_VOS_1P8
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI16_ENABLED TRUE
+#define STM32_HSI16_DIVIDER_ENABLED FALSE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_ADC_CLOCK_ENABLED TRUE
+#define STM32_USB_CLOCK_ENABLED TRUE
+#define STM32_MSIRANGE STM32_MSIRANGE_2M
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI16
+#define STM32_PLLMUL_VALUE 4
+#define STM32_PLLDIV_VALUE 2
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV1
+#define STM32_PPRE2 STM32_PPRE2_DIV1
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE STM32_MCOPRE_DIV1
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_RTCPRE STM32_RTCPRE_DIV2
+#define STM32_USART1SEL STM32_USART1SEL_APB
+#define STM32_USART2SEL STM32_USART2SEL_APB
+#define STM32_LPUART1SEL STM32_LPUART1SEL_APB
+#define STM32_I2C1SEL STM32_I2C1SEL_APB
+#define STM32_I2C3SEL STM32_I2C3SEL_APB
+#define STM32_LPTIM1SEL STM32_LPTIM1SEL_APB
+#define STM32_HSI48SEL STM32_HSI48SEL_HSI48
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_1_PRIORITY 3
+#define STM32_IRQ_EXTI2_3_PRIORITY 3
+#define STM32_IRQ_EXTI4_15_PRIORITY 3
+#define STM32_IRQ_EXTI16_PRIORITY 3
+#define STM32_IRQ_EXTI17_20_PRIORITY 3
+#define STM32_IRQ_EXTI21_22_PRIORITY 3
+
+/*
+ * ADC driver system settings.
+ * Note, IRQ is shared with EXT channels 21 and 22.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_PRESCALER_VALUE 1
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_TIM2_IRQ_PRIORITY 2
+#define STM32_GPT_USE_TIM6 TRUE
+#define STM32_GPT_TIM6_IRQ_PRIORITY 2
+#define STM32_GPT_USE_TIM21 FALSE
+#define STM32_GPT_TIM21_IRQ_PRIORITY 2
+#define STM32_GPT_USE_TIM22 FALSE
+#define STM32_GPT_TIM22_IRQ_PRIORITY 2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_USE_I2C3 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 3
+#define STM32_I2C_I2C2_IRQ_PRIORITY 3
+#define STM32_I2C_I2C3_IRQ_PRIORITY 3
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_I2C3_DMA_PRIORITY 1
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_TIM2_IRQ_PRIORITY 3
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_TIM3_IRQ_PRIORITY 3
+#define STM32_ICU_USE_TIM21 FALSE
+#define STM32_ICU_TIM21_IRQ_PRIORITY 3
+#define STM32_ICU_USE_TIM22 FALSE
+#define STM32_ICU_TIM22_IRQ_PRIORITY 3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_TIM2_IRQ_PRIORITY 3
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_TIM3_IRQ_PRIORITY 3
+#define STM32_PWM_USE_TIM21 FALSE
+#define STM32_PWM_TIM21_IRQ_PRIORITY 3
+#define STM32_PWM_USE_TIM22 FALSE
+#define STM32_PWM_TIM22_IRQ_PRIORITY 3
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 TRUE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USE_LPUART1 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 3
+#define STM32_SERIAL_USART2_PRIORITY 3
+#define STM32_SERIAL_USART3_8_PRIORITY 3
+#define STM32_SERIAL_LPUART1_PRIORITY 3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 1
+#define STM32_SPI_SPI2_IRQ_PRIORITY 1
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 2
+#define STM32_ST_USE_TIMER 21
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_UART4 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 3
+#define STM32_UART_USART2_IRQ_PRIORITY 3
+#define STM32_UART_USART3_8_IRQ_PRIORITY 3
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#include "mcuconf_community.h"
+
+#endif /* MCUCONF_H */
|