diff options
Diffstat (limited to 'testhal/STM32/STM32F4xx/USB_HOST/SEGGER_RTT_Conf.h')
| -rw-r--r-- | testhal/STM32/STM32F4xx/USB_HOST/SEGGER_RTT_Conf.h | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/testhal/STM32/STM32F4xx/USB_HOST/SEGGER_RTT_Conf.h b/testhal/STM32/STM32F4xx/USB_HOST/SEGGER_RTT_Conf.h new file mode 100644 index 0000000..5aa7a69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/USB_HOST/SEGGER_RTT_Conf.h @@ -0,0 +1,123 @@ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER RTT * Real Time Transfer for embedded targets * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the RTT protocol and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* conditions are met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this list of conditions and the following disclaimer. * +* * +* o Redistributions in binary form must reproduce the above * +* copyright notice, this list of conditions and the following * +* disclaimer in the documentation and/or other materials provided * +* with the distribution. * +* * +* o Neither the name of SEGGER Microcontroller GmbH * +* nor the names of its contributors may be used to endorse or * +* promote products derived from this software without specific * +* prior written permission. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* RTT version: 6.44i * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT_Conf.h +Purpose : Implementation of SEGGER real-time transfer (RTT) which + allows real-time communication on targets which support + debugger memory accesses while the CPU is running. +Revision: $Rev: 13430 $ + +*/ + +#ifndef SEGGER_RTT_CONF_H +#define SEGGER_RTT_CONF_H + +#ifdef __IAR_SYSTEMS_ICC__ + #include <intrinsics.h> +#endif + +/********************************************************************* +* +* Defines, configurable +* +********************************************************************** +*/ + +#define SEGGER_RTT_MAX_NUM_UP_BUFFERS (2) // Max. number of up-buffers (T->H) available on this target (Default: 3) +#define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (2) // Max. number of down-buffers (H->T) available on this target (Default: 3) + +#define BUFFER_SIZE_UP (1024) // Size of the buffer for terminal output of target, up to host (Default: 1k) +#define BUFFER_SIZE_DOWN (16) // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16) + +#define SEGGER_RTT_PRINTF_BUFFER_SIZE (128u) // Size of buffer for RTT printf to bulk-send chars via RTT (Default: 64) + +#define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP // Mode for pre-initialized terminal channel (buffer 0) + +/********************************************************************* +* +* RTT memcpy configuration +* +* memcpy() is good for large amounts of data, +* but the overhead is big for small amounts, which are usually stored via RTT. +* With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead. +* +* SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions. +* This is may be required with memory access restrictions, +* such as on Cortex-A devices with MMU. +*/ +#define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0 // 0: Use memcpy/SEGGER_RTT_MEMCPY, 1: Use a simple byte-loop +// +// Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets +// +//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__)) +// #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) SEGGER_memcpy((pDest), (pSrc), (NumBytes)) +//#endif + +// +// Target is not allowed to perform other RTT operations while string still has not been stored completely. +// Otherwise we would probably end up with a mixed string in the buffer. +// If using RTT from within interrupts, multiple tasks or multi processors, define the SEGGER_RTT_LOCK() and SEGGER_RTT_UNLOCK() function here. +#if !defined(SEGGER_RTT_ASM) +#include "ch.h" +#define SEGGER_RTT_LOCK() do { \ + syssts_t LockState = chSysGetStatusAndLockX() +#define SEGGER_RTT_UNLOCK() chSysRestoreStatusX(LockState); \ + } while(0) +#endif +#endif +/*************************** End of file ****************************/ |