1 files changed, 32 insertions, 0 deletions
diff --git a/testhal/STM32/STM32F1xx/onewire/readme.txt b/testhal/STM32/STM32F1xx/onewire/readme.txt
new file mode 100644
index 0000000..f10ae0b
--- /dev/null
+++ b/testhal/STM32/STM32F1xx/onewire/readme.txt
@@ -0,0 +1,32 @@
+*****************************************************************************
+** ChibiOS/RT HAL - 1-Wire driver demo for STM32F1xx.                      **
+*****************************************************************************
+
+** TARGET **
+
+The demo will on an Olimex STM32_103STK board.
+
+** The Demo **
+
+The application demonstrates the use of the STM32F1xx 1-Wire driver.
+
+** Board Setup **
+
+To use demo you have to power your 1-wire device from 5V bus on board
+and connect DQ line to PB0 pin. Do not forget about external pullup
+resistor to 5V (4k7 recommended).
+
+** Build Procedure **
+
+The demo has been tested using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com