diff options
Diffstat (limited to 'os/hal/ports/NRF5/LLD/TWIMv1/hal_i2c_lld.h')
| -rw-r--r-- | os/hal/ports/NRF5/LLD/TWIMv1/hal_i2c_lld.h | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/os/hal/ports/NRF5/LLD/TWIMv1/hal_i2c_lld.h b/os/hal/ports/NRF5/LLD/TWIMv1/hal_i2c_lld.h new file mode 100644 index 0000000..a73efc7 --- /dev/null +++ b/os/hal/ports/NRF5/LLD/TWIMv1/hal_i2c_lld.h @@ -0,0 +1,214 @@ +/*
+ Copyright (C) 2018 andru
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file NRF5/NRF52832/hal_i2c_lld.h
+ * @brief NRF52 I2C subsystem low level driver header.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef HAL_I2C_LLD_H
+#define HAL_I2C_LLD_H
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief I2C0 driver enable switch.
+ * @details If set to @p TRUE the support for I2C0 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(NRF5_I2C_USE_I2C0) || defined(__DOXYGEN__)
+#define NRF5_I2C_USE_I2C0 FALSE
+#endif
+
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(NRF5_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define NRF5_I2C_USE_I2C1 FALSE
+#endif
+
+/**
+ * @brief I2C0 interrupt priority level setting.
+ */
+#if !defined(NRF5_I2C_I2C0_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_I2C_I2C0_IRQ_PRIORITY 3
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ */
+#if !defined(NRF5_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF5_I2C_I2C1_IRQ_PRIORITY 3
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if NRF5_I2C_USE_I2C0 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_I2C_I2C0_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to I2C0"
+#endif
+
+#if NRF5_I2C_USE_I2C1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF5_I2C_I2C1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to I2C1"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/* @brief Type representing I2C address. */
+typedef uint8_t i2caddr_t;
+
+/* @brief Type of I2C Driver condition flags. */
+typedef uint32_t i2cflags_t;
+
+/**
+ * @brief Driver configuration structure.
+ * @note Implementations may extend this structure to contain more,
+ * architecture dependent, fields.
+ */
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+
+ /* @brief Clock to be used for the I2C bus. */
+ uint32_t clock;
+ /* @brief Pad number for SCL */
+ uint8_t scl_pad;
+ /* @brief Pad number for SDA */
+ uint8_t sda_pad;
+ /* @brief Whether to use the internal pull-up for SCL */
+ bool scl_pullup;
+ /* @brief Whether to use the internal pull-up for SDA */
+ bool sda_pullup;
+
+} I2CConfig;
+
+/**
+ * @brief Type of a structure representing an I2C driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver {
+ /**
+ * @brief Driver state.
+ */
+ i2cstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const I2CConfig *config;
+ /**
+ * @brief Error flags.
+ */
+ i2cflags_t errors;
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the bus.
+ */
+ mutex_t mutex;
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#if defined(I2C_DRIVER_EXT_FIELDS)
+ I2C_DRIVER_EXT_FIELDS
+#endif
+ /* @brief Thread waiting for I/O completion. */
+ thread_reference_t thread;
+ /* @brief Current slave address without R/W bit. */
+ i2caddr_t addr;
+
+ /* End of the mandatory fields.*/
+
+ /* @brief Low-level register access. */
+ NRF_TWIM_Type *i2c;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Get errors from I2C driver.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define i2c_lld_get_errors(i2cp) ((i2cp)->errors)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+
+#if NRF5_I2C_USE_I2C0
+extern I2CDriver I2CD1;
+#endif
+
+#if NRF5_I2C_USE_I2C1
+extern I2CDriver I2CD2;
+#endif
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2c_lld_init(void);
+ void i2c_lld_start(I2CDriver *i2cp);
+ void i2c_lld_stop(I2CDriver *i2cp);
+ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ const uint8_t *txbuf, size_t txbytes,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+ msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_I2C */
+
+#endif /* HAL_I2C_LLD_H */
+
+/** @} */
|