diff options
Diffstat (limited to 'os/hal/ports/KINETIS/LLD/USBHSv1/hal_usb_lld.h')
| -rw-r--r-- | os/hal/ports/KINETIS/LLD/USBHSv1/hal_usb_lld.h | 455 |
1 files changed, 455 insertions, 0 deletions
diff --git a/os/hal/ports/KINETIS/LLD/USBHSv1/hal_usb_lld.h b/os/hal/ports/KINETIS/LLD/USBHSv1/hal_usb_lld.h new file mode 100644 index 0000000..05dd9c8 --- /dev/null +++ b/os/hal/ports/KINETIS/LLD/USBHSv1/hal_usb_lld.h @@ -0,0 +1,455 @@ +/*
+ ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde/
+ (C) 2015-2016 flabbergast <s3+flabbergast@sdfeu.org>
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file USBHSv1/hal_usb_lld.h
+ * @brief KINETIS USB subsystem low level driver header.
+ *
+ * @addtogroup USB
+ * @{
+ */
+
+#ifndef HAL_USB_LLD_H_
+#define HAL_USB_LLD_H_
+
+#if HAL_USE_USB || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Maximum endpoint address.
+ */
+#define USB_MAX_ENDPOINTS 15
+
+/**
+ * @brief Status stage handling method.
+ */
+#define USB_EP0_STATUS_STAGE USB_EP0_STATUS_STAGE_SW
+
+/**
+ * @brief Address ack handling
+ */
+#define USB_SET_ADDRESS_ACK_HANDLING USB_SET_ADDRESS_ACK_SW
+
+/**
+ * @brief This device requires the address change after the status packet.
+ */
+#define USB_SET_ADDRESS_MODE USB_LATE_SET_ADDRESS
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @brief USB1 driver enable switch.
+ * @details If set to @p TRUE the support for USB1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(KINETIS_USB_USE_USB0) || defined(__DOXYGEN__)
+#define KINETIS_USB_USE_USB0 FALSE
+#endif
+
+/**
+ * @brief USB1 interrupt priority level setting.
+ */
+#if !defined(KINETIS_USB_USB0_IRQ_PRIORITY)|| defined(__DOXYGEN__)
+#define KINETIS_USB_USB0_IRQ_PRIORITY 5
+#endif
+
+#if !defined(KINETIS_USB_ENDPOINTS) || defined(__DOXYGEN__)
+ #define KINETIS_USB_ENDPOINTS USB_MAX_ENDPOINTS+1
+#endif
+
+/**
+ * @brief Host wake-up procedure duration.
+ */
+#if !defined(USB_HOST_WAKEUP_DURATION) || defined(__DOXYGEN__)
+#define USB_HOST_WAKEUP_DURATION 2
+#endif
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if KINETIS_USB_USE_USB0 && !KINETIS_HAS_USB
+#error "USB not present in the selected device"
+#endif
+
+#if !KINETIS_USB_USE_USB0
+#error "USB driver activated but no USB peripheral assigned"
+#endif
+
+#if KINETIS_USB_USE_USB0 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_USB_USB0_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to KINETIS_USB_USB0_IRQ_PRIORITY"
+#endif
+
+#if !defined(KINETIS_USB_IRQ_VECTOR)
+#error "KINETIS_USB_IRQ_VECTOR not defined"
+#endif
+
+#if (USB_HOST_WAKEUP_DURATION < 2) || (USB_HOST_WAKEUP_DURATION > 15)
+#error "invalid USB_HOST_WAKEUP_DURATION setting, it must be between 2 and 15"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of an IN endpoint state structure.
+ */
+typedef struct {
+ /**
+ * @brief Requested transmit transfer size.
+ */
+ size_t txsize;
+ /**
+ * @brief Transmitted bytes so far.
+ */
+ size_t txcnt;
+ /**
+ * @brief Pointer to the transmission linear buffer.
+ */
+ const uint8_t *txbuf;
+#if (USB_USE_WAIT == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif
+ /* End of the mandatory fields.*/
+ /* */
+ bool odd_even; /* ODD / EVEN */
+ /* */
+ bool data_bank; /* DATA0 / DATA1 */
+} USBInEndpointState;
+
+/**
+ * @brief Type of an OUT endpoint state structure.
+ */
+typedef struct {
+ /**
+ * @brief Requested receive transfer size.
+ */
+ size_t rxsize;
+ /**
+ * @brief Received bytes so far.
+ */
+ size_t rxcnt;
+ /**
+ * @brief Pointer to the receive linear buffer.
+ */
+ uint8_t *rxbuf;
+#if (USB_USE_WAIT == TRUE) || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Number of packets to receive.
+ */
+ uint16_t rxpkts;
+ /* */
+ bool odd_even; /* ODD / EVEN */
+ /* */
+ bool data_bank; /* DATA0 / DATA1 */
+} USBOutEndpointState;
+
+/**
+ * @brief Type of an USB endpoint configuration structure.
+ * @note Platform specific restrictions may apply to endpoints.
+ */
+typedef struct {
+ /**
+ * @brief Type and mode of the endpoint.
+ */
+ uint32_t ep_mode;
+ /**
+ * @brief Setup packet notification callback.
+ * @details This callback is invoked when a setup packet has been
+ * received.
+ * @post The application must immediately call @p usbReadPacket() in
+ * order to access the received packet.
+ * @note This field is only valid for @p USB_EP_MODE_TYPE_CTRL
+ * endpoints, it should be set to @p NULL for other endpoint
+ * types.
+ */
+ usbepcallback_t setup_cb;
+ /**
+ * @brief IN endpoint notification callback.
+ * @details This field must be set to @p NULL if callback is not required.
+ */
+ usbepcallback_t in_cb;
+ /**
+ * @brief OUT endpoint notification callback.
+ * @details This field must be set to @p NULL if callback is not required.
+ */
+ usbepcallback_t out_cb;
+ /**
+ * @brief IN endpoint maximum packet size.
+ * @details This field must be set to zero if the IN endpoint is not used.
+ */
+ uint16_t in_maxsize;
+ /**
+ * @brief OUT endpoint maximum packet size.
+ * @details This field must be set to zero if the OUT endpoint is not used.
+ */
+ uint16_t out_maxsize;
+ /**
+ * @brief @p USBEndpointState associated to the IN endpoint.
+ * @details This field must be set to @p NULL if the IN endpoint is not
+ * used.
+ */
+ USBInEndpointState *in_state;
+ /**
+ * @brief @p USBEndpointState associated to the OUT endpoint.
+ * @details This field must be set to @p NULL if the OUT endpoint is not
+ * used.
+ */
+ USBOutEndpointState *out_state;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Reserved field, not currently used.
+ * @note Initialize this field to 1 in order to be forward compatible.
+ */
+ uint16_t ep_buffers;
+ /**
+ * @brief Pointer to a buffer for setup packets.
+ * @details Setup packets require a dedicated 8-bytes buffer, set this
+ * field to @p NULL for non-control endpoints.
+ */
+ uint8_t *setup_buf;
+} USBEndpointConfig;
+
+/**
+ * @brief Type of an USB driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief USB events callback.
+ * @details This callback is invoked when an USB driver event is registered.
+ */
+ usbeventcb_t event_cb;
+ /**
+ * @brief Device GET_DESCRIPTOR request callback.
+ * @note This callback is mandatory and cannot be set to @p NULL.
+ */
+ usbgetdescriptor_t get_descriptor_cb;
+ /**
+ * @brief Requests hook callback.
+ * @details This hook allows to be notified of standard requests or to
+ * handle non standard requests.
+ */
+ usbreqhandler_t requests_hook_cb;
+ /**
+ * @brief Start Of Frame callback.
+ */
+ usbcallback_t sof_cb;
+ /* End of the mandatory fields.*/
+} USBConfig;
+
+/**
+ * @brief Structure representing an USB driver.
+ */
+struct USBDriver {
+ /**
+ * @brief Driver state.
+ */
+ usbstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const USBConfig *config;
+ /**
+ * @brief Bit map of the transmitting IN endpoints.
+ */
+ uint16_t transmitting;
+ /**
+ * @brief Bit map of the receiving OUT endpoints.
+ */
+ uint16_t receiving;
+ /**
+ * @brief Active endpoints configurations.
+ */
+ const USBEndpointConfig *epc[USB_MAX_ENDPOINTS + 1];
+ /**
+ * @brief Fields available to user, it can be used to associate an
+ * application-defined handler to an IN endpoint.
+ * @note The base index is one, the endpoint zero does not have a
+ * reserved element in this array.
+ */
+ void *in_params[USB_MAX_ENDPOINTS];
+ /**
+ * @brief Fields available to user, it can be used to associate an
+ * application-defined handler to an OUT endpoint.
+ * @note The base index is one, the endpoint zero does not have a
+ * reserved element in this array.
+ */
+ void *out_params[USB_MAX_ENDPOINTS];
+ /**
+ * @brief Endpoint 0 state.
+ */
+ usbep0state_t ep0state;
+ /**
+ * @brief Next position in the buffer to be transferred through endpoint 0.
+ */
+ uint8_t *ep0next;
+ /**
+ * @brief Number of bytes yet to be transferred through endpoint 0.
+ */
+ size_t ep0n;
+ /**
+ * @brief Endpoint 0 end transaction callback.
+ */
+ usbcallback_t ep0endcb;
+ /**
+ * @brief Setup packet buffer.
+ */
+ uint8_t setup[8];
+ /**
+ * @brief Current USB device status.
+ */
+ uint16_t status;
+ /**
+ * @brief Assigned USB address.
+ */
+ uint8_t address;
+ /**
+ * @brief Current USB device configuration.
+ */
+ uint8_t configuration;
+ /**
+ * @brief State of the driver when a suspend happened.
+ */
+ usbstate_t saved_state;
+#if defined(USB_DRIVER_EXT_FIELDS)
+ USB_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the next address in the packet memory.
+ */
+ uint32_t pmnext;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Returns the current frame number.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @return The current frame number.
+ *
+ * @notapi
+ */
+#define usb_lld_get_frame_number(usbp) ((USB0->FRMNUMH<<8)|USB0->FRMNUML)
+
+/**
+ * @brief Returns the exact size of a receive transaction.
+ * @details The received size can be different from the size specified in
+ * @p usbStartReceiveI() because the last packet could have a size
+ * different from the expected one.
+ * @pre The OUT endpoint must have been configured in transaction mode
+ * in order to use this function.
+ *
+ * @param[in] usbp pointer to the @p USBDriver object
+ * @param[in] ep endpoint number
+ * @return Received data size.
+ *
+ * @notapi
+ */
+#define usb_lld_get_transaction_size(usbp, ep) \
+ ((usbp)->epc[ep]->out_state->rxcnt)
+
+/**
+ * @brief Connects the USB device.
+ *
+ * @api
+ */
+#if !defined(usb_lld_connect_bus)
+#define usb_lld_connect_bus(usbp) (USB0->CONTROL |= USBx_CONTROL_DPPULLUPNONOTG)
+#endif
+
+/**
+ * @brief Disconnect the USB device.
+ *
+ * @api
+ */
+#if !defined(usb_lld_disconnect_bus)
+/* Writing to USB0->CONTROL causes an unhandled exception when USB module is not clocked. */
+#if KINETIS_USB0_IS_USBOTG
+#define usb_lld_disconnect_bus(usbp) if(SIM->SCGC4 & SIM_SCGC4_USBOTG) {USB0->CONTROL &= ~USBx_CONTROL_DPPULLUPNONOTG;} else {}
+#else /* KINETIS_USB0_IS_USBOTG */
+#define usb_lld_disconnect_bus(usbp) if(SIM->SCGC4 & SIM_SCGC4_USBFS) {USB0->CONTROL &= ~USBx_CONTROL_DPPULLUPNONOTG;} else {}
+#endif /* KINETIS_USB0_IS_USBOTG */
+#endif
+
+/**
+ * @brief Start of host wake-up procedure.
+ *
+ * @notapi
+ */
+#define usb_lld_wakeup_host(usbp) \
+ do{ \
+ USB0->CTL |= USBx_CTL_RESUME; \
+ osalThreadSleepMilliseconds(USB_HOST_WAKEUP_DURATION); \
+ USB0->CTL &= ~USBx_CTL_RESUME; \
+ } while (false)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if KINETIS_USB_USE_USB0 && !defined(__DOXYGEN__)
+extern USBDriver USBD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void usb_lld_init(void);
+ void usb_lld_start(USBDriver *usbp);
+ void usb_lld_stop(USBDriver *usbp);
+ void usb_lld_reset(USBDriver *usbp);
+ void usb_lld_set_address(USBDriver *usbp);
+ void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep);
+ void usb_lld_disable_endpoints(USBDriver *usbp);
+ usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep);
+ usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf);
+ void usb_lld_start_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_start_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_stall_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_stall_in(USBDriver *usbp, usbep_t ep);
+ void usb_lld_clear_out(USBDriver *usbp, usbep_t ep);
+ void usb_lld_clear_in(USBDriver *usbp, usbep_t ep);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_USB */
+
+#endif /* HAL_USB_LLD_H_ */
+
+/** @} */
|