diff options
Diffstat (limited to 'os/hal/ports/KINETIS/LLD/SPIv1')
-rw-r--r-- | os/hal/ports/KINETIS/LLD/SPIv1/driver.mk | 9 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/LLD/SPIv1/hal_spi_lld.c | 539 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/LLD/SPIv1/hal_spi_lld.h | 261 |
3 files changed, 809 insertions, 0 deletions
diff --git a/os/hal/ports/KINETIS/LLD/SPIv1/driver.mk b/os/hal/ports/KINETIS/LLD/SPIv1/driver.mk new file mode 100644 index 0000000..394b40a --- /dev/null +++ b/os/hal/ports/KINETIS/LLD/SPIv1/driver.mk @@ -0,0 +1,9 @@ +ifeq ($(USE_SMART_BUILD),yes) +ifneq ($(findstring HAL_USE_SPI TRUE,$(HALCONF)),) +PLATFORMSRC_CONTRIB += ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/SPIv1/hal_spi_lld.c +endif +else +PLATFORMSRC_CONTRIB += ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/SPIv1/hal_spi_lld.c +endif + +PLATFORMINC_CONTRIB += ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/SPIv1 diff --git a/os/hal/ports/KINETIS/LLD/SPIv1/hal_spi_lld.c b/os/hal/ports/KINETIS/LLD/SPIv1/hal_spi_lld.c new file mode 100644 index 0000000..7e643f2 --- /dev/null +++ b/os/hal/ports/KINETIS/LLD/SPIv1/hal_spi_lld.c @@ -0,0 +1,539 @@ +/* + ChibiOS - Copyright (C) 2014-2015 Fabio Utzig + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file SPIv1/hal_spi_lld.c + * @brief KINETIS SPI subsystem low level driver source. + * + * @addtogroup SPI + * @{ + */ + +#include "hal.h" + +#if HAL_USE_SPI || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#if !defined(KINETIS_SPI0_RX_DMA_IRQ_PRIORITY) +#define KINETIS_SPI0_RX_DMA_IRQ_PRIORITY 8 +#endif + +#if !defined(KINETIS_SPI0_RX_DMAMUX_CHANNEL) +#define KINETIS_SPI0_RX_DMAMUX_CHANNEL 0 +#endif + +#if !defined(KINETIS_SPI0_RX_DMA_CHANNEL) +#define KINETIS_SPI0_RX_DMA_CHANNEL 0 +#endif + +#if !defined(KINETIS_SPI0_TX_DMAMUX_CHANNEL) +#define KINETIS_SPI0_TX_DMAMUX_CHANNEL 1 +#endif + +#if !defined(KINETIS_SPI0_TX_DMA_CHANNEL) +#define KINETIS_SPI0_TX_DMA_CHANNEL 1 +#endif + +#if !defined(KINETIS_SPI1_RX_DMA_IRQ_PRIORITY) +#define KINETIS_SPI1_RX_DMA_IRQ_PRIORITY 8 +#endif + +#if !defined(KINETIS_SPI1_RX_DMAMUX_CHANNEL) +#define KINETIS_SPI1_RX_DMAMUX_CHANNEL 0 +#endif + +#if !defined(KINETIS_SPI1_RX_DMA_CHANNEL) +#define KINETIS_SPI1_RX_DMA_CHANNEL 0 +#endif + +#if !defined(KINETIS_SPI1_TX_DMAMUX_CHANNEL) +#define KINETIS_SPI1_TX_DMAMUX_CHANNEL 1 +#endif + +#if !defined(KINETIS_SPI1_TX_DMA_CHANNEL) +#define KINETIS_SPI1_TX_DMA_CHANNEL 1 +#endif + +#if KINETIS_SPI_USE_SPI0 +#define DMAMUX_SPI_RX_SOURCE 16 +#define DMAMUX_SPI_TX_SOURCE 17 +#endif + +#if KINETIS_SPI_USE_SPI1 +#define DMAMUX_SPI_RX_SOURCE 18 +#define DMAMUX_SPI_TX_SOURCE 19 +#endif + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/** @brief SPI0 driver identifier.*/ +#if KINETIS_SPI_USE_SPI0 || defined(__DOXYGEN__) +SPIDriver SPID1; +#endif + +/** @brief SPI1 driver identifier.*/ +#if KINETIS_SPI_USE_SPI1 || defined(__DOXYGEN__) +SPIDriver SPID2; +#endif + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/* Use a dummy byte as the source/destination when a buffer is not provided */ +/* Note: The MMC driver relies on 0xFF being sent for dummy bytes. */ +static volatile uint16_t dmaRxDummy; +static uint16_t dmaTxDummy = 0xFFFF; + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +static void spi_start_xfer(SPIDriver *spip, bool polling) +{ + /* + * Enable the DSPI peripheral in master mode. + * Clear the TX and RX FIFOs. + * */ + spip->spi->MCR = SPIx_MCR_MSTR | SPIx_MCR_CLR_TXF | SPIx_MCR_CLR_RXF; + + /* If we are not polling then enable DMA */ + if (!polling) { + + /* Enable receive dma and transmit dma */ + spip->spi->RSER = SPIx_RSER_RFDF_DIRS | SPIx_RSER_RFDF_RE | + SPIx_RSER_TFFF_RE | SPIx_RSER_TFFF_DIRS; + + /* Configure RX DMA */ + if (spip->rxbuf) { + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].DADDR = (uint32_t)spip->rxbuf; + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].DOFF = spip->word_size; + } else { + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].DADDR = (uint32_t)&dmaRxDummy; + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].DOFF = 0; + } + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].BITER_ELINKNO = spip->count; + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].CITER_ELINKNO = spip->count; + + /* Enable Request Register (ERQ) for RX by writing 0 to SERQ */ + DMA->SERQ = KINETIS_SPI0_RX_DMA_CHANNEL; + + /* Configure TX DMA */ + if (spip->txbuf) { + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].SADDR = (uint32_t)spip->txbuf; + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].SOFF = spip->word_size; + } else { + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].SADDR = (uint32_t)&dmaTxDummy; + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].SOFF = 0; + } + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].BITER_ELINKNO = spip->count; + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].CITER_ELINKNO = spip->count; + + /* Enable Request Register (ERQ) for TX by writing 1 to SERQ */ + DMA->SERQ = KINETIS_SPI0_TX_DMA_CHANNEL; + } +} + +static void spi_stop_xfer(SPIDriver *spip) +{ + /* Halt the DSPI peripheral */ + spip->spi->MCR = SPIx_MCR_MSTR | SPIx_MCR_HALT; + + /* Clear all the flags which are currently set. */ + spip->spi->SR |= spip->spi->SR; +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +#if KINETIS_SPI_USE_SPI0 || defined(__DOXYGEN__) + +OSAL_IRQ_HANDLER(KINETIS_DMA0_IRQ_VECTOR) { + OSAL_IRQ_PROLOGUE(); + + /* Clear bit 0 in Interrupt Request Register (INT) by writing 0 to CINT */ + DMA->CINT = KINETIS_SPI0_RX_DMA_CHANNEL; + + spi_stop_xfer(&SPID1); + + _spi_isr_code(&SPID1); + + OSAL_IRQ_EPILOGUE(); +} + +#endif + +#if KINETIS_SPI_USE_SPI1 || defined(__DOXYGEN__) + +OSAL_IRQ_HANDLER(KINETIS_DMA0_IRQ_VECTOR) { + OSAL_IRQ_PROLOGUE(); + + /* Clear bit 0 in Interrupt Request Register (INT) by writing 0 to CINT */ + DMA->CINT = KINETIS_SPI1_RX_DMA_CHANNEL; + + spi_stop_xfer(&SPID2); + + _spi_isr_code(&SPID2); + + OSAL_IRQ_EPILOGUE(); +} + +#endif + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Low level SPI driver initialization. + * + * @notapi + */ +void spi_lld_init(void) { +#if KINETIS_SPI_USE_SPI0 + spiObjectInit(&SPID1); +#endif +#if KINETIS_SPI_USE_SPI1 + spiObjectInit(&SPID2); +#endif +} + +/** + * @brief Configures and activates the SPI peripheral. + * + * @param[in] spip pointer to the @p SPIDriver object + * + * @notapi + */ +void spi_lld_start(SPIDriver *spip) { + + /* If in stopped state then enables the SPI and DMA clocks.*/ + if (spip->state == SPI_STOP) { + +#if KINETIS_SPI_USE_SPI0 + if (&SPID1 == spip) { + + /* Enable the clock for SPI0 */ + SIM->SCGC6 |= SIM_SCGC6_SPI0; + + SPID1.spi = SPI0; + + if (spip->config->tar0) { + spip->spi->CTAR[0] = spip->config->tar0; + } else { + spip->spi->CTAR[0] = KINETIS_SPI_TAR0_DEFAULT; + } + } +#endif + +#if KINETIS_SPI_USE_SPI1 + if (&SPID2 == spip) { + + /* Enable the clock for SPI0 */ + SIM->SCGC6 |= SIM_SCGC6_SPI1; + + SPID2.spi = SPI1; + + if (spip->config->tar0) { + spip->spi->CTAR[0] = spip->config->tar0; + } else { + spip->spi->CTAR[0] = KINETIS_SPI_TAR0_DEFAULT; + } + } +#endif + + nvicEnableVector(DMA0_IRQn, KINETIS_SPI0_RX_DMA_IRQ_PRIORITY); + + SIM->SCGC6 |= SIM_SCGC6_DMAMUX; + SIM->SCGC7 |= SIM_SCGC7_DMA; + + /* Clear DMA error flags */ + DMA->ERR = 0x0F; + +#if KINETIS_SPI_USE_SPI0 + /* Rx, select SPI Rx FIFO */ + DMAMUX->CHCFG[KINETIS_SPI0_RX_DMAMUX_CHANNEL] = DMAMUX_CHCFGn_ENBL | + DMAMUX_CHCFGn_SOURCE(DMAMUX_SPI_RX_SOURCE); + + /* Tx, select SPI Tx FIFO */ + DMAMUX->CHCFG[KINETIS_SPI0_TX_DMAMUX_CHANNEL] = DMAMUX_CHCFGn_ENBL | + DMAMUX_CHCFGn_SOURCE(DMAMUX_SPI_TX_SOURCE); + + /* Extract the frame size from the TAR */ + uint16_t frame_size = ((spip->spi->CTAR[0] >> SPIx_CTARn_FMSZ_SHIFT) & + SPIx_CTARn_FMSZ_MASK) + 1; + + /* DMA transfer size is 16 bits for a frame size > 8 bits */ + uint16_t dma_size = frame_size > 8 ? 1 : 0; + + /* DMA word size is 2 for a 16 bit frame size */ + spip->word_size = frame_size > 8 ? 2 : 1; + + /* configure DMA RX fixed values */ + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].SADDR = (uint32_t)&SPI0->POPR; + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].SOFF = 0; + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].SLAST = 0; + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].DLASTSGA = 0; + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].ATTR = DMA_ATTR_SSIZE(dma_size) | + DMA_ATTR_DSIZE(dma_size); + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].NBYTES_MLNO = spip->word_size; + DMA->TCD[KINETIS_SPI0_RX_DMA_CHANNEL].CSR = DMA_CSR_DREQ_MASK | + DMA_CSR_INTMAJOR_MASK; + + /* configure DMA TX fixed values */ + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].SLAST = 0; + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].DADDR = (uint32_t)&SPI0->PUSHR; + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].DOFF = 0; + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].DLASTSGA = 0; + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].ATTR = DMA_ATTR_SSIZE(dma_size) | + DMA_ATTR_DSIZE(dma_size); + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].NBYTES_MLNO = spip->word_size; + DMA->TCD[KINETIS_SPI0_TX_DMA_CHANNEL].CSR = DMA_CSR_DREQ_MASK; +#endif + +#if KINETIS_SPI_USE_SPI1 + /* Rx, select SPI Rx FIFO */ + DMAMUX->CHCFG[KINETIS_SPI1_RX_DMAMUX_CHANNEL] = DMAMUX_CHCFGn_ENBL | + DMAMUX_CHCFGn_SOURCE(DMAMUX_SPI_RX_SOURCE); + + /* Tx, select SPI Tx FIFO */ + DMAMUX->CHCFG[KINETIS_SPI1_TX_DMAMUX_CHANNEL] = DMAMUX_CHCFGn_ENBL | + DMAMUX_CHCFGn_SOURCE(DMAMUX_SPI_TX_SOURCE); + + /* Extract the frame size from the TAR */ + uint16_t frame_size = ((spip->spi->CTAR[0] >> SPIx_CTARn_FMSZ_SHIFT) & + SPIx_CTARn_FMSZ_MASK) + 1; + + /* DMA transfer size is 16 bits for a frame size > 8 bits */ + uint16_t dma_size = frame_size > 8 ? 1 : 0; + + /* DMA word size is 2 for a 16 bit frame size */ + spip->word_size = frame_size > 8 ? 2 : 1; + + /* configure DMA RX fixed values */ + DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].SADDR = (uint32_t)&SPI1->POPR; + DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].SOFF = 0; + DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].SLAST = 0; + DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].DLASTSGA = 0; + DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].ATTR = DMA_ATTR_SSIZE(dma_size) | + DMA_ATTR_DSIZE(dma_size); + DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].NBYTES_MLNO = spip->word_size; + DMA->TCD[KINETIS_SPI1_RX_DMA_CHANNEL].CSR = DMA_CSR_DREQ_MASK | + DMA_CSR_INTMAJOR_MASK; + + /* configure DMA TX fixed values */ + DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].SLAST = 0; + DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].DADDR = (uint32_t)&SPI1->PUSHR; + DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].DOFF = 0; + DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].DLASTSGA = 0; + DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].ATTR = DMA_ATTR_SSIZE(dma_size) | + DMA_ATTR_DSIZE(dma_size); + DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].NBYTES_MLNO = spip->word_size; + DMA->TCD[KINETIS_SPI1_TX_DMA_CHANNEL].CSR = DMA_CSR_DREQ_MASK; +#endif + } +} + +/** + * @brief Deactivates the SPI peripheral. + * + * @param[in] spip pointer to the @p SPIDriver object + * + * @notapi + */ +void spi_lld_stop(SPIDriver *spip) { + + /* If in ready state then disables the SPI clock.*/ + if (spip->state == SPI_READY) { + + nvicDisableVector(DMA0_IRQn); + + SIM->SCGC7 &= ~SIM_SCGC7_DMA; + SIM->SCGC6 &= ~SIM_SCGC6_DMAMUX; + +#if KINETIS_SPI_USE_SPI0 + if (&SPID1 == spip) { + /* SPI halt.*/ + spip->spi->MCR |= SPIx_MCR_HALT; + } + + /* Disable the clock for SPI0 */ + SIM->SCGC6 &= ~SIM_SCGC6_SPI0; +#endif + +#if KINETIS_SPI_USE_SPI1 + if (&SPID2 == spip) { + /* SPI halt.*/ + spip->spi->MCR |= SPIx_MCR_HALT; + } + + /* Disable the clock for SPI1 */ + SIM->SCGC6 &= ~SIM_SCGC6_SPI1; +#endif + } +} + +/** + * @brief Asserts the slave select signal and prepares for transfers. + * + * @param[in] spip pointer to the @p SPIDriver object + * + * @notapi + */ +void spi_lld_select(SPIDriver *spip) { + + palClearPad(spip->config->ssport, spip->config->sspad); +} + +/** + * @brief Deasserts the slave select signal. + * @details The previously selected peripheral is unselected. + * + * @param[in] spip pointer to the @p SPIDriver object + * + * @notapi + */ +void spi_lld_unselect(SPIDriver *spip) { + + palSetPad(spip->config->ssport, spip->config->sspad); +} + +/** + * @brief Ignores data on the SPI bus. + * @details This asynchronous function starts the transmission of a series of + * idle words on the SPI bus and ignores the received data. + * @post At the end of the operation the configured callback is invoked. + * + * @param[in] spip pointer to the @p SPIDriver object + * @param[in] n number of words to be ignored + * + * @notapi + */ +void spi_lld_ignore(SPIDriver *spip, size_t n) { + + spip->count = n; + spip->rxbuf = NULL; + spip->txbuf = NULL; + + spi_start_xfer(spip, false); +} + +/** + * @brief Exchanges data on the SPI bus. + * @details This asynchronous function starts a simultaneous transmit/receive + * operation. + * @post At the end of the operation the configured callback is invoked. + * @note The buffers are organized as uint8_t arrays for data sizes below or + * equal to 8 bits else it is organized as uint16_t arrays. + * + * @param[in] spip pointer to the @p SPIDriver object + * @param[in] n number of words to be exchanged + * @param[in] txbuf the pointer to the transmit buffer + * @param[out] rxbuf the pointer to the receive buffer + * + * @notapi + */ +void spi_lld_exchange(SPIDriver *spip, size_t n, + const void *txbuf, void *rxbuf) { + + spip->count = n; + spip->rxbuf = rxbuf; + spip->txbuf = txbuf; + + spi_start_xfer(spip, false); +} + +/** + * @brief Sends data over the SPI bus. + * @details This asynchronous function starts a transmit operation. + * @post At the end of the operation the configured callback is invoked. + * @note The buffers are organized as uint8_t arrays for data sizes below or + * equal to 8 bits else it is organized as uint16_t arrays. + * + * @param[in] spip pointer to the @p SPIDriver object + * @param[in] n number of words to send + * @param[in] txbuf the pointer to the transmit buffer + * + * @notapi + */ +void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) { + + spip->count = n; + spip->rxbuf = NULL; + spip->txbuf = (void *)txbuf; + + spi_start_xfer(spip, false); +} + +/** + * @brief Receives data from the SPI bus. + * @details This asynchronous function starts a receive operation. + * @post At the end of the operation the configured callback is invoked. + * @note The buffers are organized as uint8_t arrays for data sizes below or + * equal to 8 bits else it is organized as uint16_t arrays. + * + * @param[in] spip pointer to the @p SPIDriver object + * @param[in] n number of words to receive + * @param[out] rxbuf the pointer to the receive buffer + * + * @notapi + */ +void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) { + + spip->count = n; + spip->rxbuf = rxbuf; + spip->txbuf = NULL; + + spi_start_xfer(spip, false); +} + +/** + * @brief Exchanges one frame using a polled wait. + * @details This synchronous function exchanges one frame using a polled + * synchronization method. This function is useful when exchanging + * small amount of data on high speed channels, usually in this + * situation is much more efficient just wait for completion using + * polling than suspending the thread waiting for an interrupt. + * + * @param[in] spip pointer to the @p SPIDriver object + * @param[in] frame the data frame to send over the SPI bus + * @return The received data frame from the SPI bus. + */ +uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame) { + + spi_start_xfer(spip, true); + + spip->spi->PUSHR = SPIx_PUSHR_TXDATA(frame); + + while ((spip->spi->SR & SPIx_SR_RFDF) == 0) + ; + + frame = spip->spi->POPR; + + spi_stop_xfer(spip); + + return frame; +} + +#endif /* HAL_USE_SPI */ + +/** @} */ diff --git a/os/hal/ports/KINETIS/LLD/SPIv1/hal_spi_lld.h b/os/hal/ports/KINETIS/LLD/SPIv1/hal_spi_lld.h new file mode 100644 index 0000000..d25dd75 --- /dev/null +++ b/os/hal/ports/KINETIS/LLD/SPIv1/hal_spi_lld.h @@ -0,0 +1,261 @@ +/* + ChibiOS - Copyright (C) 2014-2015 Fabio Utzig + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file SPIv1/hal_spi_lld.h + * @brief KINETIS SPI subsystem low level driver header. + * + * @addtogroup SPI + * @{ + */ + +#ifndef HAL_SPI_LLD_H_ +#define HAL_SPI_LLD_H_ + +#if HAL_USE_SPI || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @name Configuration options + * @{ + */ +/** + * @brief SPI0 driver enable switch. + * @details If set to @p TRUE the support for SPI0 is included. + * @note The default is @p FALSE. + */ +#if !defined(KINETIS_SPI_USE_SPI0) || defined(__DOXYGEN__) +#define KINETIS_SPI_USE_SPI0 FALSE +#endif + +/** + * @brief SPI0 interrupt priority level setting. + */ +#if !defined(KINETIS_SPI_SPI0_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define KINETIS_SPI_SPI0_IRQ_PRIORITY 10 +#endif + +/** + * @brief SPI1 driver enable switch. + * @details If set to @p TRUE the support for SPI0 is included. + * @note The default is @p FALSE. + */ +#if !defined(KINETIS_SPI_USE_SPI1) || defined(__DOXYGEN__) +#define KINETIS_SPI_USE_SPI1 FALSE +#endif + +/** + * @brief SPI1 interrupt priority level setting. + */ +#if !defined(KINETIS_SPI_SPI1_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define KINETIS_SPI_SPI1_IRQ_PRIORITY 10 +#endif + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +#if KINETIS_SPI_USE_SPI0 && !KINETIS_HAS_SPI0 +#error "SPI0 not present in the selected device" +#endif + +#if KINETIS_SPI_USE_SPI1 && !KINETIS_HAS_SPI1 +#error "SPI1 not present in the selected device" +#endif + +#if KINETIS_SPI_USE_SPI0 && KINETIS_SPI_USE_SPI1 +#error "Only one SPI peripheral can be enabled" +#endif + +#if !(KINETIS_SPI_USE_SPI0 || KINETIS_SPI_USE_SPI1) +#error "SPI driver activated but no SPI peripheral assigned" +#endif + +#if KINETIS_SPI_USE_SPI0 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_SPI_SPI0_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to SPI0" +#endif + +#if KINETIS_SPI_USE_SPI1 && \ + !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_SPI_SPI1_IRQ_PRIORITY) +#error "Invalid IRQ priority assigned to SPI1" +#endif + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @brief Type of a structure representing an SPI driver. + */ +typedef struct SPIDriver SPIDriver; + +/** + * @brief SPI notification callback type. + * + * @param[in] spip pointer to the @p SPIDriver object triggering the + * callback + */ +typedef void (*spicallback_t)(SPIDriver *spip); + +/** + * @brief Driver configuration structure. + */ +typedef struct { + /** + * @brief Operation complete callback or @p NULL. + */ + spicallback_t end_cb; + /* End of the mandatory fields.*/ + /** + * @brief The chip select line port - when not using pcs. + */ + ioportid_t ssport; + /** + * @brief The chip select line pad number - when not using pcs. + */ + uint16_t sspad; + /** + * @brief SPI initialization data. + */ + uint32_t tar0; +} SPIConfig; + +/** + * @brief Structure representing a SPI driver. + */ +struct SPIDriver { + /** + * @brief Driver state. + */ + spistate_t state; + /** + * @brief Current configuration data. + */ + const SPIConfig *config; +#if SPI_USE_WAIT || defined(__DOXYGEN__) + /** + * @brief Waiting thread. + */ + thread_reference_t thread; +#endif /* SPI_USE_WAIT */ +#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) + /** + * @brief Mutex protecting the bus. + */ + mutex_t mutex; +#endif /* SPI_USE_MUTUAL_EXCLUSION */ +#if defined(SPI_DRIVER_EXT_FIELDS) + SPI_DRIVER_EXT_FIELDS +#endif + /* End of the mandatory fields.*/ + /** + * @brief Pointer to the SPIx registers block. + */ + SPI_TypeDef *spi; + /** + * @brief Number of bytes/words of data to transfer. + */ + size_t count; + /** + * @brief Word size in bytes. + */ + size_t word_size; + /** + * @brief Pointer to the buffer with data to send. + */ + const uint8_t *txbuf; + /** + * @brief Pointer to the buffer to put received data. + */ + uint8_t *rxbuf; +}; + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/* TAR settings for n bits at SYSCLK / 2 */ +#define KINETIS_SPI_TAR_SYSCLK_DIV_2(n)\ + SPIx_CTARn_FMSZ((n) - 1) | \ + SPIx_CTARn_CPOL | \ + SPIx_CTARn_CPHA | \ + SPIx_CTARn_DBR | \ + SPIx_CTARn_PBR(0) | \ + SPIx_CTARn_BR(0) | \ + SPIx_CTARn_CSSCK(0) | \ + SPIx_CTARn_ASC(0) | \ + SPIx_CTARn_DT(0) + +/* TAR settings for n bits at SYSCLK / 4096 for debugging */ +#define KINETIS_SPI_TAR_SYSCLK_DIV_4096(n) \ + SPIx_CTARn_FMSZ(((n) - 1)) | \ + SPIx_CTARn_CPOL | \ + SPIx_CTARn_CPHA | \ + SPIx_CTARn_PBR(0) | \ + SPIx_CTARn_BR(0xB) | \ + SPIx_CTARn_CSSCK(0xB) | \ + SPIx_CTARn_ASC(0x7) | \ + SPIx_CTARn_DT(0xB) + +#define KINETIS_SPI_TAR_8BIT_FAST KINETIS_SPI_TAR_SYSCLK_DIV_2(8) +#define KINETIS_SPI_TAR_8BIT_SLOW KINETIS_SPI_TAR_SYSCLK_DIV_4096(8) + +#define KINETIS_SPI_TAR0_DEFAULT KINETIS_SPI_TAR_SYSCLK_DIV_2(8) +#define KINETIS_SPI_TAR1_DEFAULT KINETIS_SPI_TAR_SYSCLK_DIV_2(8) + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if KINETIS_SPI_USE_SPI0 && !defined(__DOXYGEN__) +extern SPIDriver SPID1; +#endif + +#if KINETIS_SPI_USE_SPI1 && !defined(__DOXYGEN__) +extern SPIDriver SPID2; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + void spi_lld_init(void); + void spi_lld_start(SPIDriver *spip); + void spi_lld_stop(SPIDriver *spip); + void spi_lld_select(SPIDriver *spip); + void spi_lld_unselect(SPIDriver *spip); + void spi_lld_ignore(SPIDriver *spip, size_t n); + void spi_lld_exchange(SPIDriver *spip, size_t n, + const void *txbuf, void *rxbuf); + void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf); + void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf); + uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame); +#ifdef __cplusplus +} +#endif + +#endif /* HAL_USE_SPI */ + +#endif /* HAL_SPI_LLD_H_ */ + +/** @} */ |