diff options
Diffstat (limited to 'os/hal/ports/KINETIS/LLD/GPIOv1/hal_pal_lld.h')
| -rw-r--r-- | os/hal/ports/KINETIS/LLD/GPIOv1/hal_pal_lld.h | 428 |
1 files changed, 428 insertions, 0 deletions
diff --git a/os/hal/ports/KINETIS/LLD/GPIOv1/hal_pal_lld.h b/os/hal/ports/KINETIS/LLD/GPIOv1/hal_pal_lld.h new file mode 100644 index 0000000..376c0a6 --- /dev/null +++ b/os/hal/ports/KINETIS/LLD/GPIOv1/hal_pal_lld.h @@ -0,0 +1,428 @@ +/*
+ ChibiOS - Copyright (C) 2014-2015 Fabio Utzig
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file GPIOv1/hal_pal_lld.h
+ * @brief PAL subsystem low level driver header.
+ *
+ * @addtogroup PAL
+ * @{
+ */
+
+#ifndef HAL_PAL_LLD_H_
+#define HAL_PAL_LLD_H_
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Unsupported modes and specific modes */
+/*===========================================================================*/
+
+#define PAL_MODE_ALTERNATIVE_1 0x10
+#define PAL_MODE_ALTERNATIVE_2 0x11
+#define PAL_MODE_ALTERNATIVE_3 0x12
+#define PAL_MODE_ALTERNATIVE_4 0x13
+#define PAL_MODE_ALTERNATIVE_5 0x14
+#define PAL_MODE_ALTERNATIVE_6 0x15
+#define PAL_MODE_ALTERNATIVE_7 0x16
+
+#define PIN_MUX_ALTERNATIVE(x) PORTx_PCRn_MUX(x)
+
+/*===========================================================================*/
+/* I/O Ports Types and constants. */
+/*===========================================================================*/
+
+#define TOTAL_PORTS 5
+#define PADS_PER_PORT 32
+
+/**
+ * @brief Width, in bits, of an I/O port.
+ */
+#define PAL_IOPORTS_WIDTH 32
+
+/**
+ * @brief Whole port mask.
+ * @brief This macro specifies all the valid bits into a port.
+ */
+#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFFFFF)
+
+/**
+ * @brief Digital I/O port sized unsigned type.
+ */
+typedef uint32_t ioportmask_t;
+
+/**
+ * @brief Digital I/O modes.
+ */
+typedef uint32_t iomode_t;
+
+/**
+ * @brief Type of an I/O line.
+ */
+typedef uint32_t ioline_t;
+
+/**
+ * @brief Port Identifier.
+ * @details This type can be a scalar or some kind of pointer, do not make
+ * any assumption about it, use the provided macros when populating
+ * variables of this type.
+ */
+typedef GPIO_TypeDef *ioportid_t;
+
+/**
+ * @brief Type of an pad identifier.
+ */
+typedef uint32_t iopadid_t;
+
+/**
+ * @brief Port Configuration.
+ * @details This structure stores the configuration parameters of all pads
+ * belonging to a port.
+ */
+typedef struct {
+ ioportid_t port;
+ iomode_t pads[PADS_PER_PORT];
+} PortConfig;
+
+/**
+ * @brief Generic I/O ports static initializer.
+ * @details An instance of this structure must be passed to @p palInit() at
+ * system startup time in order to initialized the digital I/O
+ * subsystem. This represents only the initial setup, specific pads
+ * or whole ports can be reprogrammed at later time.
+ * @note Implementations may extend this structure to contain more,
+ * architecture dependent, fields.
+ */
+typedef struct {
+ PortConfig ports[TOTAL_PORTS];
+} PALConfig;
+
+/*===========================================================================*/
+/* I/O Ports Identifiers. */
+/*===========================================================================*/
+
+/**
+ * @brief GPIO port A identifier.
+ */
+#define IOPORT1 GPIOA
+
+/**
+ * @brief GPIO port B identifier.
+ */
+#define IOPORT2 GPIOB
+
+/**
+ * @brief GPIO port C identifier.
+ */
+#define IOPORT3 GPIOC
+
+/**
+ * @brief GPIO port D identifier.
+ */
+#define IOPORT4 GPIOD
+
+/**
+ * @brief GPIO port E identifier.
+ */
+#define IOPORT5 GPIOE
+
+/**
+ * @name Line handling macros
+ * @{
+ */
+/**
+ * @brief Forms a line identifier.
+ * @details A port/pad pair are encoded into an @p ioline_t type. The encoding
+ * of this type is platform-dependent.
+ * @note In this driver the pad number is encoded in the byte of the GPIO
+ * address that's zero on all Kinetis devices.
+ */
+#define PAL_LINE(port, pad) \
+ ((ioline_t)((uint32_t)(port) | ((uint32_t)(pad)<<20)))
+
+/**
+ * @brief Decodes a port identifier from a line identifier.
+ */
+#define PAL_PORT(line) \
+ ((GPIO_TypeDef *)(((uint32_t)(line)) & 0xF00FFFFFU))
+
+/**
+ * @brief Decodes a pad identifier from a line identifier.
+ */
+#define PAL_PAD(line) \
+ ((uint32_t)((uint32_t)(line) & 0x0FF00000U)>>20)
+
+/**
+ * @brief Value identifying an invalid line.
+ */
+#define PAL_NOLINE 0U
+/** @} */
+
+/*===========================================================================*/
+/* Implementation, some of the following macros could be implemented as */
+/* functions, if so please put them in pal_lld.c. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level PAL subsystem initialization.
+ *
+ * @param[in] config architecture-dependent ports configuration
+ *
+ * @notapi
+ */
+#define pal_lld_init(config) _pal_lld_init(config)
+
+/**
+ * @brief Reads the physical I/O port states.
+ *
+ * @param[in] port port identifier
+ * @return The port bits.
+ *
+ * @notapi
+ */
+#define pal_lld_readport(port) \
+ (port)->PDIR
+
+/**
+ * @brief Reads the output latch.
+ * @details The purpose of this function is to read back the latched output
+ * value.
+ *
+ * @param[in] port port identifier
+ * @return The latched logical states.
+ *
+ * @notapi
+ */
+#define pal_lld_readlatch(port) \
+ (port)->PDOR
+
+/**
+ * @brief Writes a bits mask on a I/O port.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be written on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_writeport(port, bits) \
+ (port)->PDOR = (bits)
+
+/**
+ * @brief Sets a bits mask on a I/O port.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be ORed on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_setport(port, bits) \
+ (port)->PSOR = (bits)
+
+/**
+ * @brief Clears a bits mask on a I/O port.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be cleared on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_clearport(port, bits) \
+ (port)->PCOR = (bits)
+
+/**
+ * @brief Toggles a bits mask on a I/O port.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ *
+ * @param[in] port port identifier
+ * @param[in] bits bits to be toggled on the specified port
+ *
+ * @notapi
+ */
+#define pal_lld_toggleport(port, bits) \
+ (port)->PTOR = (bits)
+
+/**
+ * @brief Reads a group of bits.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ *
+ * @param[in] port port identifier
+ * @param[in] mask group mask
+ * @param[in] offset group bit offset within the port
+ * @return The group logical states.
+ *
+ * @notapi
+ */
+#define pal_lld_readgroup(port, mask, offset) 0
+
+/**
+ * @brief Writes a group of bits.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ *
+ * @param[in] port port identifier
+ * @param[in] mask group mask
+ * @param[in] offset group bit offset within the port
+ * @param[in] bits bits to be written. Values exceeding the group width
+ * are masked.
+ *
+ * @notapi
+ */
+#define pal_lld_writegroup(port, mask, offset, bits) (void)bits
+
+/**
+ * @brief Pads group mode setup.
+ * @details This function programs a pads group belonging to the same port
+ * with the specified mode.
+ * @note Programming an unknown or unsupported mode is silently ignored.
+ *
+ * @param[in] port port identifier
+ * @param[in] mask group mask
+ * @param[in] offset group bit offset within the port
+ * @param[in] mode group mode
+ *
+ * @notapi
+ */
+#define pal_lld_setgroupmode(port, mask, offset, mode) \
+ _pal_lld_setgroupmode(port, mask << offset, mode)
+
+/**
+ * @brief Reads a logical state from an I/O pad.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ *
+ * @param[in] port port identifier
+ * @param[in] pad pad number within the port
+ * @return The logical state.
+ * @retval PAL_LOW low logical state.
+ * @retval PAL_HIGH high logical state.
+ *
+ * @notapi
+ */
+#define pal_lld_readpad(port, pad) _pal_lld_readpad(port, pad)
+
+/**
+ * @brief Writes a logical state on an output pad.
+ * @note This function is not meant to be invoked directly by the
+ * application code.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ *
+ * @param[in] port port identifier
+ * @param[in] pad pad number within the port
+ * @param[in] bit logical value, the value must be @p PAL_LOW or
+ * @p PAL_HIGH
+ *
+ * @notapi
+ */
+#define pal_lld_writepad(port, pad, bit) _pal_lld_writepad(port, pad, bit)
+
+/**
+ * @brief Sets a pad logical state to @p PAL_HIGH.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ *
+ * @param[in] port port identifier
+ * @param[in] pad pad number within the port
+ *
+ * @notapi
+ */
+#define pal_lld_setpad(port, pad) (port)->PSOR = ((uint32_t) 1 << (pad))
+
+/**
+ * @brief Clears a pad logical state to @p PAL_LOW.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ *
+ * @param[in] port port identifier
+ * @param[in] pad pad number within the port
+ *
+ * @notapi
+ */
+#define pal_lld_clearpad(port, pad) (port)->PCOR = ((uint32_t) 1 << (pad))
+
+/**
+ * @brief Toggles a pad logical state.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ *
+ * @param[in] port port identifier
+ * @param[in] pad pad number within the port
+ *
+ * @notapi
+ */
+#define pal_lld_togglepad(port, pad) (port)->PTOR = ((uint32_t) 1 << (pad))
+
+/**
+ * @brief Pad mode setup.
+ * @details This function programs a pad with the specified mode.
+ * @note The @ref PAL provides a default software implementation of this
+ * functionality, implement this function if can optimize it by using
+ * special hardware functionalities or special coding.
+ * @note Programming an unknown or unsupported mode is silently ignored.
+ *
+ * @param[in] port port identifier
+ * @param[in] pad pad number within the port
+ * @param[in] mode pad mode
+ *
+ * @notapi
+ */
+#define pal_lld_setpadmode(port, pad, mode) \
+ _pal_lld_setpadmode(port, pad, mode)
+
+#if !defined(__DOXYGEN__)
+extern const PALConfig pal_default_config;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void _pal_lld_init(const PALConfig *config);
+ void _pal_lld_setgroupmode(ioportid_t port,
+ ioportmask_t mask,
+ iomode_t mode);
+ void _pal_lld_setpadmode(ioportid_t port,
+ uint8_t pad,
+ iomode_t mode);
+ uint8_t _pal_lld_readpad(ioportid_t port,
+ uint8_t pad);
+ void _pal_lld_writepad(ioportid_t port,
+ uint8_t pad,
+ uint8_t bit);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_PAL */
+
+#endif /* HAL_PAL_LLD_H_ */
+
+/** @} */
|