diff options
Diffstat (limited to 'os/hal/ports/KINETIS/KL2x')
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/hal_lld.c | 227 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/hal_lld.h | 81 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/kinetis_registry.h | 212 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/kinetis_tpm.h | 120 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/kl25z.h | 1190 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/pal_lld.c | 225 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/pal_lld.h | 331 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/platform.mk | 8 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/pwm_lld.c | 52 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/pwm_lld.h | 66 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/serial_lld.c | 353 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/serial_lld.h | 163 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/st_lld.c | 98 | ||||
-rw-r--r-- | os/hal/ports/KINETIS/KL2x/st_lld.h | 156 |
14 files changed, 558 insertions, 2724 deletions
diff --git a/os/hal/ports/KINETIS/KL2x/hal_lld.c b/os/hal/ports/KINETIS/KL2x/hal_lld.c index dce1588..77addf0 100644 --- a/os/hal/ports/KINETIS/KL2x/hal_lld.c +++ b/os/hal/ports/KINETIS/KL2x/hal_lld.c @@ -40,7 +40,7 @@ #ifdef __CC_ARM
__attribute__ ((section(".ARM.__at_0x400")))
#else
-__attribute__ ((used, section(".cfmconfig")))
+__attribute__ ((used,section(".cfmconfig")))
#endif
const uint8_t _cfm[0x10] = {
0xFF, /* NV_BACKKEY3: KEY=0xFF */
@@ -55,9 +55,20 @@ const uint8_t _cfm[0x10] = { 0xFF, /* NV_FPROT2: PROT=0xFF */
0xFF, /* NV_FPROT1: PROT=0xFF */
0xFF, /* NV_FPROT0: PROT=0xFF */
+#if defined(KINETIS_NV_FSEC_BYTE)
+ #warning Please triple check your FSEC setting: KEYEN!=b10, MEEN==b10, SEC!=b10 leads to an unmodifiable chip.
+ KINETIS_NV_FSEC_BYTE,
+#else /* KINETIS_NV_FSEC_BYTE */
0x7E, /* NV_FSEC: KEYEN=1,MEEN=3,FSLACC=3,SEC=2 */
+#endif /* KINETIS_NV_FSEC_BYTE */
+#if defined(KINETIS_NV_FOPT_BYTE)
+ KINETIS_NV_FOPT_BYTE,
+#else /* KINETIS_NV_FOPT_BYTE */
0xFF, /* NV_FOPT: ??=1,??=1,FAST_INIT=1,LPBOOT1=1,RESET_PIN_CFG=1,
NMI_DIS=1,EZPORT_DIS=1,LPBOOT0=1 */
+ /* on KL27: bit7-6:BOOTSRC_SEL=0b11 (11=from ROM; 00=from FLASH)
+ bit1:BOOTPIN_OPT=1 (NMI pin not sampled at boot) */
+#endif /* KINETIS_NV_FOPT_BYTE */
0xFF,
0xFF
};
@@ -91,6 +102,7 @@ void hal_lld_init(void) { */
void kl2x_clock_init(void) {
#if !KINETIS_NO_INIT
+
/* Disable COP watchdog */
SIM->COPC = 0;
@@ -107,16 +119,118 @@ void kl2x_clock_init(void) { /* System oscillator drives 32 kHz clock (OSC32KSEL=0) */
SIM->SOPT1 &= ~SIM_SOPT1_OSC32KSEL_MASK;
+#if KINETIS_HAS_MCG_LITE
+/* MCU only has MCG_Lite */
+
+#if KINETIS_MCGLITE_MODE == KINETIS_MCGLITE_MODE_LIRC8M
+ /* Out of reset, the MCU is in LIRC8M mode. */
+ /* Except when coming out of the ROM bootloader, then
+ * the MCU is in HIRC mode; so better set it explicitly here. */
+
+ /* Switching to LIRC8M mode, page 414 of the KL27Z manual. */
+
+ /* (1) Write 1b to MCG_C2[IRCS] to select LIRC 8M. */
+ MCG->C2 |= MCG_C2_IRCS;
+
+ /* (2) Write 1b to MCG_C1[IRCLKEN] to enable LIRC clock (optional). */
+ MCG->C1 |= MCG_C1_IRCLKEN;
+
+ /* (2) Write 01b to MCG_C1[CLKS] to select LIRC clock source. */
+ MCG->C1 = (MCG->C1 & ~MCG_C1_CLKS_MASK) | MCG_C1_CLKS_LIRC;
+
+ /* (3) Check MCG_S[CLKST] to confirm LIRC clock source is selected. */
+ while( (MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_LIRC )
+ ;
+
+#elif KINETIS_MCGLITE_MODE == KINETIS_MCGLITE_MODE_HIRC
+ /* Switching to HIRC mode, page 413 of the KL27Z manual. */
+
+ /* (1) Write 1b to MCG_MC[HIRCEN] to enable HIRC (optional). */
+ MCG->MC |= MCG_MC_HIRCEN;
+
+ /* (2) Write 00b to MCG_C1[CLKS] to select HIRC clock source. */
+ MCG->C1 = (MCG->C1 & ~MCG_C1_CLKS_MASK) | MCG_C1_CLKS_HIRC;
+
+ /* (3) Check MCG_S[CLKST] to confirm HIRC clock source is selected. */
+ while( (MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_HIRC )
+ ;
+
+#elif KINETIS_MCGLITE_MODE == KINETIS_MCGLITE_MODE_EXT
+ /* Assuming we have an external crystal, frequency
+ * specified with KINETIS_XTAL_FREQUENCY.
+ *
+ * Note: Except with 32768 kHz crystal (low-freq mode),
+ * external load capacitors and a feedback resistor
+ * are *required*. Additionally, a series resistor is
+ * required in the high-gain mode, and forbidden in
+ * the low-power mode.
+ * In this case, the internal caps can be configured
+ * via KINETIS_BOARD_OSCILLATOR_SETTING.
+ * (Page 420 of the KL27 manual.) */
+
+ /* EXTAL0 and XTAL0 */
+ PORTA->PCR[18] &= ~0x01000700; /* Set PA18 to analog (default) */
+ PORTA->PCR[19] &= ~0x01000700; /* Set PA19 to analog (default) */
+
+ /* Internal capacitors for crystal */
+#if defined(KINETIS_BOARD_OSCILLATOR_SETTING)
+ OSC0->CR = KINETIS_BOARD_OSCILLATOR_SETTING;
+#else /* KINETIS_BOARD_OSCILLATOR_SETTING */
+ /* Disable the internal capacitors */
+ OSC0->CR = 0;
+#endif /* KINETIS_BOARD_OSCILLATOR_SETTING */
+
+ /* Switching to EXT mode, page 413 of the KL27 manual. */
+
+ /* (1) Configure MCG_C2[EREFS0] for external clock source selection. */
+ #if KINETIS_XTAL_FREQUENCY == 32768 /* low range */
+ MCG->C2 = (MCG->C2 & ~MCG_C2_RANGE0_MASK) | MCG_C2_RANGE0(0);
+ #elif (KINETIS_XTAL_FREQUENCY >= 1000000 && \
+ KINETIS_XTAL_FREQUENCY <= 8000000) /* high range */
+ MCG->C2 = (MCG->C2 & ~MCG_C2_RANGE0_MASK) | MCG_C2_RANGE0(1);
+ #elif (KINETIS_XTAL_FREQUENCY > 8000000 && \
+ KINETIS_XTAL_FREQUENCY <= 32000000) /* very high range */
+ MCG->C2 = (MCG->C2 & ~MCG_C2_RANGE0_MASK) | MCG_C2_RANGE0(2);
+ #else /* KINETIS_XTAL_FREQUENCY == */
+ #error KINETIS_XTAL_FREQUENCY not in allowed range
+ #endif /* KINETIS_XTAL_FREQUENCY == */
+
+ #if defined(KINETIS_XTAL_HIGH_GAIN) && KINETIS_XTAL_HIGH_GAIN
+ MCG->C2 |= MCG_C2_HGO0;
+ #endif /* KINETIS_XTAL_HIGH_GAIN */
+
+ /* Oscillator requested. */
+ MCG->C2 |= MCG_C2_EREFS0;
+
+ /* (2) Write 10b to MCG_C1[CLKS] to select external clock source. */
+ MCG->C1 = (MCG->C1 & ~MCG_C1_CLKS_MASK) | MCG_C1_CLKS_EXT;
+
+ /* (3) Check MCG_S[CLKST] to confirm external clock source is selected. */
+ while( (MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_EXT )
+ ;
+
+#else /* KINETIS_MCGLITE_MODE */
+#error Unimplemented KINETIS_MCGLITE_MODE
+#endif /* KINETIS_MCGLITE_MODE */
+
+#else /* KINETIS_HAS_MCG_LITE */
+/* MCU has full blown MCG */
+
#if KINETIS_MCG_MODE == KINETIS_MCG_MODE_FEI
/* This is the default mode at reset. */
/* The MCGOUTCLK is divided by OUTDIV1 and OUTDIV4:
* OUTDIV1 (divider for core/system and bus/flash clock)
* OUTDIV4 (additional divider for bus/flash clock) */
SIM->CLKDIV1 =
- SIM_CLKDIV1_OUTDIV1(1) | /* OUTDIV1 = divide-by-2 => 24 MHz */
- SIM_CLKDIV1_OUTDIV4(0); /* OUTDIV4 = divide-by-1 => 24 MHz */
+ SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1-1) |
+ SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4-1);
+
+ /* Configure FEI mode */
+ MCG->C4 = MCG_C4_DRST_DRS(KINETIS_MCG_FLL_DRS) |
+ (KINETIS_MCG_FLL_DMX32 ? MCG_C4_DMX32 : 0);
#elif KINETIS_MCG_MODE == KINETIS_MCG_MODE_FEE
+ /* TODO: check this, for generality */
/*
* FLL Enabled External (FEE) MCG Mode
* 24 MHz core, 12 MHz bus - using 32.768 kHz crystal with FLL.
@@ -138,14 +252,20 @@ void kl2x_clock_init(void) { * OUTDIV1 (divider for core/system and bus/flash clock)
* OUTDIV4 (additional divider for bus/flash clock) */
SIM->CLKDIV1 =
- SIM_CLKDIV1_OUTDIV1(KINETIS_MCG_FLL_OUTDIV1 - 1) |
- SIM_CLKDIV1_OUTDIV4(KINETIS_MCG_FLL_OUTDIV4 - 1);
+ SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1 - 1) |
+ SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4 - 1);
/* EXTAL0 and XTAL0 */
PORTA->PCR[18] &= ~0x01000700; /* Set PA18 to analog (default) */
PORTA->PCR[19] &= ~0x01000700; /* Set PA19 to analog (default) */
+ /* Internal capacitors for crystal */
+#if defined(KINETIS_BOARD_OSCILLATOR_SETTING)
+ OSC0->CR = KINETIS_BOARD_OSCILLATOR_SETTING;
+#else /* KINETIS_BOARD_OSCILLATOR_SETTING */
+ /* Disable the internal capacitors */
OSC0->CR = 0;
+#endif /* KINETIS_BOARD_OSCILLATOR_SETTING */
/* From KL25P80M48SF0RM section 24.5.1.1 "Initializing the MCG". */
/* To change from FEI mode to FEE mode: */
@@ -183,35 +303,40 @@ void kl2x_clock_init(void) { seems to omit it. */
#elif KINETIS_MCG_MODE == KINETIS_MCG_MODE_PEE
+ uint32_t ratio, frdiv;
+ uint32_t ratios[] = { 32, 64, 128, 256, 512, 1024, 1280, 1536 };
+ uint8_t ratio_quantity = sizeof(ratios) / sizeof(ratios[0]);
+ uint8_t i;
+
/*
* PLL Enabled External (PEE) MCG Mode
- * 48 MHz core, 24 MHz bus - using 8 MHz crystal with PLL.
+ * Uses external crystal (KINETIS_XTAL_FREQUENCY) with PLL.
* f_MCGOUTCLK = (OSCCLK / PLL_R) * M
- * = 8 MHz / 2 * 24 = 96 MHz
+ * OSCCLK = KINETIS_XTAL_FREQUENCY
* PLL_R is the reference divider selected by C5[PRDIV0]
+ * (OSCCLK/PLL_R must be between 2 and 4 MHz)
* M is the multiplier selected by C6[VDIV0]
*
+ * Running from PLL, so assuming PLLCLK = MCGOUTCLK.
+ *
* Then the core/system and bus/flash clocks are divided:
* f_SYS = f_MCGOUTCLK / OUTDIV1 = 96 MHz / 2 = 48 MHz
* f_BUS = f_MCGOUTCLK / OUTDIV1 / OUTDIV4 = 96 MHz / 4 = 24 MHz
*/
- /* The MCGOUTCLK is divided by OUTDIV1 and OUTDIV4:
- * OUTDIV1 (divider for core/system and bus/flash clock)
- * OUTDIV4 (additional divider for bus/flash clock) */
- SIM->CLKDIV1 =
- SIM_CLKDIV1_OUTDIV1(1) | /* OUTDIV1 = divide-by-2 => 48 MHz */
- SIM_CLKDIV1_OUTDIV4(1); /* OUTDIV4 = divide-by-2 => 24 MHz */
-
- SIM->SOPT2 =
- SIM_SOPT2_TPMSRC(1) | /* MCGFLLCLK clock or MCGPLLCLK/2 */
- SIM_SOPT2_PLLFLLSEL; /* PLLFLLSEL=MCGPLLCLK/2 */
-
/* EXTAL0 and XTAL0 */
PORTA->PCR[18] &= ~0x01000700; /* Set PA18 to analog (default) */
PORTA->PCR[19] &= ~0x01000700; /* Set PA19 to analog (default) */
+ /* Start in FEI mode */
+
+ /* Internal capacitors for crystal */
+#if defined(KINETIS_BOARD_OSCILLATOR_SETTING)
+ OSC0->CR = KINETIS_BOARD_OSCILLATOR_SETTING;
+#else /* KINETIS_BOARD_OSCILLATOR_SETTING */
+ /* Disable the internal capacitors */
OSC0->CR = 0;
+#endif /* KINETIS_BOARD_OSCILLATOR_SETTING */
/* From KL25P80M48SF0RM section 24.5.1.1 "Initializing the MCG". */
/* To change from FEI mode to FBE mode: */
@@ -220,15 +345,27 @@ void kl2x_clock_init(void) { resistor since FRDM-KL25Z has feedback resistor R25 unpopulated.
Use high-gain mode by setting C2[HGO0] instead if external
feedback resistor Rf is installed. */
- MCG->C2 =
- MCG_C2_RANGE0(2) | /* very high frequency range */
- MCG_C2_EREFS0; /* external reference (using a crystal) */
+ MCG->C2 = MCG_C2_EREFS0; /* external reference (using a crystal) */
+ if (KINETIS_XTAL_FREQUENCY > 8000000UL)
+ MCG->C2 |= MCG_C2_RANGE0(2);
+ else
+ MCG->C2 |= MCG_C2_RANGE0(1);
/* (2) Write to C1 to select the clock mode. */
+ frdiv = 7;
+ ratio = KINETIS_XTAL_FREQUENCY / 31250UL;
+ for (i = 0; i < ratio_quantity; ++i) {
+ if (ratio == ratios[i]) {
+ frdiv = i;
+ break;
+ }
+ }
+
+ /* Switch to crystal as clock source, FLL input of 31.25 KHz */
MCG->C1 = /* Clear the IREFS bit to switch to the external reference. */
- MCG_C1_CLKS_ERCLK | /* Use ERCLK for system clock, MCGCLKOUT. */
- MCG_C1_FRDIV(3); /* Divide ERCLK / 256 for FLL reference. */
- /* Note: FLL reference frequency must be 31.25 kHz to 39.0625 kHz.
- 8 MHz / 256 = 31.25 kHz. */
+ MCG_C1_CLKS_ERCLK | /* Use Ext Ref Clock for system clock, MCGCLKOUT. */
+ MCG_C1_FRDIV(frdiv); /* Divide ERCLK / 256 for FLL reference. */
+ /* Note: FLL reference frequency must be 31.25 kHz to 39.0625 kHz. */
+
MCG->C4 &= ~(MCG_C4_DMX32 | MCG_C4_DRST_DRS_MASK);
MCG->C6 = 0; /* PLLS=0: Select FLL as MCG source, not PLL */
@@ -254,11 +391,25 @@ void kl2x_clock_init(void) { /* (2) Then configure C5[PRDIV0] to generate the
correct PLL reference frequency. */
- MCG->C5 = MCG_C5_PRDIV0(1); /* PLL External Reference Divide by 2 */
+ #define KINETIS_PLLIN_FREQUENCY 2000000UL
+ /* TODO: Make sure KINETIS_XTAL_FREQUENCY >= 2Mhz && <= 50Mhz */
+ /* PLL External Reference Divide by ... */
+ MCG->C5 = MCG_C5_PRDIV0((KINETIS_XTAL_FREQUENCY/KINETIS_PLLIN_FREQUENCY) - 1);
/* (3) Then from FBE transition to PBE mode. */
/* (3)(b) C6[PLLS]=1 to select PLL. */
- /* (3)(b) C6[VDIV0]=5'b0000 (x24) 2 MHz * 24 = 48 MHz. */
- MCG->C6 = MCG_C6_PLLS | MCG_C6_VDIV0(0);
+ /* (3)(b) C6[VDIV0]= PLLIN MHz * i = PLLCLK MHz. */
+ /* Config PLL output to match KINETIS_SYSCLK_FREQUENCY
+ * TODO: make sure KINETIS_SYSCLK_FREQUENCY is a match */
+ for(i = 24; i < 56; i++) {
+ if(i == (KINETIS_PLLCLK_FREQUENCY/KINETIS_PLLIN_FREQUENCY)) {
+ /* Config PLL to match KINETIS_PLLCLK_FREQUENCY */
+ MCG->C6 = MCG_C6_PLLS | MCG_C6_VDIV0(i-24);
+ break;
+ }
+ }
+ if(i>=56) /* Config PLL for 96 MHz output as default setting */
+ MCG->C6 = MCG_C6_PLLS | MCG_C6_VDIV0(0);
+
/* (3)(d) Loop until S[PLLST], indicating PLL
is the PLLS clock source. */
while ((MCG->S & MCG_S_PLLST) == 0)
@@ -270,14 +421,26 @@ void kl2x_clock_init(void) { /* --- MCG mode: PBE (PLL bypassed, external crystal) --- */
+ /* Set the PLL dividers for the different clocks */
+ /* The MCGOUTCLK is divided by OUTDIV1 and OUTDIV4:
+ * OUTDIV1 (divider for core/system and bus/flash clock)
+ * OUTDIV4 (additional divider for bus/flash clock)
+ * - these are computed in .h */
+ SIM->CLKDIV1 =
+ SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1-1) |
+ SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4-1);
+
+ SIM->SOPT2 =
+ SIM_SOPT2_TPMSRC(1) | /* MCGFLLCLK clock or MCGPLLCLK/2 */
+ SIM_SOPT2_PLLFLLSEL; /* PLLFLLSEL=MCGPLLCLK/2 */
+
/* (4) Transition from PBE mode to PEE mode. */
/* (4)(a) C1[CLKS] = 2'b00 to select PLL output as system clock source. */
// Switch to PEE mode
// Select PLL output (CLKS=0)
- // FLL external reference divider (FRDIV=3)
+ // FLL external reference divider (FRDIV) already set
// External reference clock for FLL (IREFS=0)
- MCG->C1 = MCG_C1_CLKS(0) |
- MCG_C1_FRDIV(3);
+ MCG->C1 = MCG_C1_CLKS(0);
/* (4)(b) Loop until S[CLKST] are 2'b11, indicating the PLL output is selected for MCGOUTCLK. */
while ((MCG->S & MCG_S_CLKST_MASK) != MCG_S_CLKST_PLL)
; /* wait until clock switched to PLL output */
@@ -288,6 +451,8 @@ void kl2x_clock_init(void) { #error Unimplemented KINETIS_MCG_MODE
#endif /* KINETIS_MCG_MODE != KINETIS_MCG_MODE_PEE */
+#endif /* KINETIS_HAS_MCG_LITE */
+
#endif /* !KINETIS_NO_INIT */
}
diff --git a/os/hal/ports/KINETIS/KL2x/hal_lld.h b/os/hal/ports/KINETIS/KL2x/hal_lld.h index f93d920..a10c21c 100644 --- a/os/hal/ports/KINETIS/KL2x/hal_lld.h +++ b/os/hal/ports/KINETIS/KL2x/hal_lld.h @@ -25,7 +25,7 @@ #ifndef _HAL_LLD_H_
#define _HAL_LLD_H_
-#include "kl25z.h"
+#include "kl2xz.h"
#include "kinetis_registry.h"
/*===========================================================================*/
@@ -44,15 +44,30 @@ #define PLATFORM_NAME "Kinetis"
/** @} */
+#if KINETIS_HAS_MCG_LITE
+/* MCU only has MCG_Lite */
+
/**
- * @brief Maximum system and core clock (f_SYS) frequency.
+ * @name Internal clock sources
+ * @{
*/
-#define KINETIS_SYSCLK_MAX 48000000
+#define KINETIS_HIRC 48000000 /**< High-frequency internal reference clock (USB recovery). */
+#define KINETIS_LIRC_8 8000000 /**< Low-frequency internal reference clock (faster). */
+#define KINETIS_LIRC_2 2000000 /**< Low-frequency internal reference clock (slower). */
+/** @} */
/**
- * @brief Maximum bus clock (f_BUS) frequency.
+ * @name MCG modes of operation
+ * @{
*/
-#define KINETIS_BUSCLK_MAX 24000000
+#define KINETIS_MCGLITE_MODE_LIRC8M 1 /**< Low frequency internal reference mode (8MHz). */
+#define KINETIS_MCGLITE_MODE_LIRC2M 2 /**< Low frequency internal reference mode (2MHz). */
+#define KINETIS_MCGLITE_MODE_HIRC 3 /**< High frequency internal reference mode (with optional USB recovery). */
+#define KINETIS_MCGLITE_MODE_EXT 4 /**< External reference mode. */
+/** @} */
+
+#else /* KINETIS_HAS_MCG_LITE */
+/* MCU has full blown MCG */
/**
* @name Internal clock sources
@@ -62,6 +77,10 @@ #define KINETIS_IRCLK_S 32768 /**< Slow internal reference clock, factory trimmed. */
/** @} */
+/**
+ * @name MCG modes of operation
+ * @{
+ */
#define KINETIS_MCG_MODE_FEI 1 /**< FLL Engaged Internal. */
#define KINETIS_MCG_MODE_FEE 2 /**< FLL Engaged External. */
#define KINETIS_MCG_MODE_FBI 3 /**< FLL Bypassed Internal. */
@@ -70,6 +89,9 @@ #define KINETIS_MCG_MODE_PBE 6 /**< PLL Bypassed External. */
#define KINETIS_MCG_MODE_BLPI 7 /**< Bypassed Low Power Internal. */
#define KINETIS_MCG_MODE_BLPE 8 /**< Bypassed Low Power External. */
+/** @} */
+
+#endif /* KINETIS_HAS_MCG_LITE */
/*===========================================================================*/
/* Driver pre-compile time settings. */
@@ -93,14 +115,29 @@ #define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
#endif
+#if !defined(KINETIS_MCGLITE_MODE) || defined(__DOXYGEN__)
+#define KINETIS_MCGLITE_MODE KINETIS_MCGLITE_MODE_HIRC
+#endif
+
+/**
+ * @brief MCU PLL clock frequency.
+ */
+#if !defined(KINETIS_PLLCLK_FREQUENCY) || defined(__DOXYGEN__)
+#define KINETIS_PLLCLK_FREQUENCY 96000000UL
+#endif
+
/**
* @brief Clock divider for core/system and bus/flash clocks (OUTDIV1).
* @note The allowed range is 1...16.
* @note The default value is calculated for a 48 MHz system clock
* from a 96 MHz PLL output.
*/
-#if !defined(KINETIS_MCG_FLL_OUTDIV1) || defined(__DOXYGEN__)
-#define KINETIS_MCG_FLL_OUTDIV1 2
+#if !defined(KINETIS_CLKDIV1_OUTDIV1) || defined(__DOXYGEN__)
+ #if defined(KINETIS_SYSCLK_FREQUENCY) && KINETIS_SYSCLK_FREQUENCY > 0
+ #define KINETIS_CLKDIV1_OUTDIV1 (KINETIS_PLLCLK_FREQUENCY/KINETIS_SYSCLK_FREQUENCY)
+ #else
+ #define KINETIS_CLKDIV1_OUTDIV1 2
+ #endif
#endif
/**
@@ -110,8 +147,12 @@ * @note The default value is calculated for 24 MHz bus/flash clocks
* from a 96 MHz PLL output and 48 MHz core/system clock.
*/
-#if !defined(KINETIS_MCG_FLL_OUTDIV4) || defined(__DOXYGEN__)
-#define KINETIS_MCG_FLL_OUTDIV4 2
+#if !defined(KINETIS_CLKDIV1_OUTDIV4) || defined(__DOXYGEN__)
+ #if defined(KINETIS_BUSCLK_FREQUENCY) && KINETIS_BUSCLK_FREQUENCY > 0
+ #define KINETIS_CLKDIV1_OUTDIV4 ((KINETIS_PLLCLK_FREQUENCY/KINETIS_CLKDIV1_OUTDIV1)/KINETIS_BUSCLK_FREQUENCY)
+ #else
+ #define KINETIS_CLKDIV1_OUTDIV4 2
+ #endif
#endif
/**
@@ -140,14 +181,14 @@ * @brief MCU system/core clock frequency.
*/
#if !defined(KINETIS_SYSCLK_FREQUENCY) || defined(__DOXYGEN__)
-#define KINETIS_SYSCLK_FREQUENCY 48000000UL
+#define KINETIS_SYSCLK_FREQUENCY (KINETIS_PLLCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV1)
#endif
/**
* @brief MCU bus/flash clock frequency.
*/
#if !defined(KINETIS_BUSCLK_FREQUENCY) || defined(__DOXYGEN__)
-#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4)
#endif
/**
@@ -190,14 +231,20 @@ #error KINETIS_BUSCLK_FREQUENCY out of range
#endif
-#if !(defined(KINETIS_MCG_FLL_OUTDIV1) && \
- KINETIS_MCG_FLL_OUTDIV1 >= 1 && KINETIS_MCG_FLL_OUTDIV1 <= 16)
-#error KINETIS_MCG_FLL_OUTDIV1 must be 1 through 16
+#if KINETIS_BUSCLK_FREQUENCY > KINETIS_SYSCLK_FREQUENCY
+ #error KINETIS_BUSCLK_FREQUENCY must be an integer divide of\
+ KINETIS_SYSCLK_FREQUENCY
+#endif
+
+
+#if !(defined(KINETIS_CLKDIV1_OUTDIV1) && \
+ KINETIS_CLKDIV1_OUTDIV1 >= 1 && KINETIS_CLKDIV1_OUTDIV1 <= 16)
+ #error KINETIS_CLKDIV1_OUTDIV1 must be 1 through 16
#endif
-#if !(defined(KINETIS_MCG_FLL_OUTDIV4) && \
- KINETIS_MCG_FLL_OUTDIV4 >= 1 && KINETIS_MCG_FLL_OUTDIV4 <= 8)
-#error KINETIS_MCG_FLL_OUTDIV4 must be 1 through 8
+#if !(defined(KINETIS_CLKDIV1_OUTDIV4) && \
+ KINETIS_CLKDIV1_OUTDIV4 >= 1 && KINETIS_CLKDIV1_OUTDIV4 <= 16)
+#error KINETIS_CLKDIV1_OUTDIV4 must be 1 through 16
#endif
#if !(KINETIS_MCG_FLL_DMX32 == 0 || KINETIS_MCG_FLL_DMX32 == 1)
diff --git a/os/hal/ports/KINETIS/KL2x/kinetis_registry.h b/os/hal/ports/KINETIS/KL2x/kinetis_registry.h index dcf3576..92ea0cc 100644 --- a/os/hal/ports/KINETIS/KL2x/kinetis_registry.h +++ b/os/hal/ports/KINETIS/KL2x/kinetis_registry.h @@ -1,5 +1,6 @@ /*
ChibiOS - Copyright (C) 2014 Derek Mulcahy
+ (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -25,6 +26,10 @@ #ifndef _KINETIS_REGISTRY_H_
#define _KINETIS_REGISTRY_H_
+#if !defined(KL2x) || defined(__DOXYGEN__)
+#define KL2x
+#endif
+
/*===========================================================================*/
/* Platform capabilities. */
/*===========================================================================*/
@@ -34,16 +39,217 @@ * @{
*/
-/* EXT attributes.*/
-#define KINETIS_PORTA_IRQ_VECTOR VectorB8
-#define KINETIS_PORTD_IRQ_VECTOR VectorBC
+/*===========================================================================*/
+/* Common features */
+/*===========================================================================*/
+
+/**
+ * @brief Maximum system and core clock (f_SYS) frequency.
+ */
+#define KINETIS_SYSCLK_MAX 48000000
+
+/**
+ * @brief Maximum bus clock (f_BUS) frequency.
+ */
+#define KINETIS_BUSCLK_MAX 24000000
/* ADC attributes.*/
#define KINETIS_HAS_ADC0 TRUE
#define KINETIS_ADC0_IRQ_VECTOR Vector7C
+#define KINETIS_HAS_ADC1 FALSE
+
+/* DMA attributes.*/
+#define KINETIS_DMA0_IRQ_VECTOR Vector40
+#define KINETIS_DMA1_IRQ_VECTOR Vector44
+#define KINETIS_DMA2_IRQ_VECTOR Vector48
+#define KINETIS_DMA3_IRQ_VECTOR Vector4C
+#define KINETIS_HAS_DMA_ERROR_IRQ FALSE
+
+/* GPT attributes.*/
+#define KINETIS_PIT_IRQ_VECTOR Vector98
+#define KINETIS_HAS_PIT_COMMON_IRQ TRUE
+#define KINETIS_HAS_PIT0 TRUE
+#define KINETIS_HAS_PIT1 TRUE
+#define KINETIS_HAS_PIT2 FALSE
+#define KINETIS_HAS_PIT3 FALSE
/* I2C attributes.*/
+#define KINETIS_HAS_I2C0 TRUE
#define KINETIS_I2C0_IRQ_VECTOR Vector60
+#define KINETIS_HAS_I2C1 TRUE
+#define KINETIS_I2C1_IRQ_VECTOR Vector64
+
+/* Serial attributes */
+#define KINETIS_HAS_SERIAL0 TRUE
+#define KINETIS_SERIAL0_IRQ_VECTOR Vector70
+#define KINETIS_HAS_SERIAL1 TRUE
+#define KINETIS_SERIAL1_IRQ_VECTOR Vector74
+#define KINETIS_HAS_SERIAL2 TRUE
+#define KINETIS_SERIAL2_IRQ_VECTOR Vector78
+#define KINETIS_HAS_SERIAL_ERROR_IRQ FALSE
+
+/* SPI attributes.*/
+#define KINETIS_HAS_SPI0 TRUE
+#define KINETIS_SPI0_IRQ_VECTOR Vector68
+#define KINETIS_HAS_SPI1 TRUE
+#define KINETIS_SPI1_IRQ_VECTOR Vector6C
+
+/* TPM attributes.*/
+#define KINETIS_HAS_TPM0 TRUE
+#define KINETIS_TPM0_CHANNELS 6
+#define KINETIS_TPM0_IRQ_VECTOR Vector84
+#define KINETIS_HAS_TPM1 TRUE
+#define KINETIS_TPM1_CHANNELS 2
+#define KINETIS_TPM1_IRQ_VECTOR Vector88
+#define KINETIS_HAS_TPM2 TRUE
+#define KINETIS_TPM2_CHANNELS 2
+#define KINETIS_TPM2_IRQ_VECTOR Vector8C
+
+/* USB attributes.*/
+#define KINETIS_HAS_USB TRUE
+#define KINETIS_USB_IRQ_VECTOR VectorA0
+
+/* FTFA attributes.*/
+#define KINETIS_FTFA_IRQ_VECTOR Vector54
+
+/* LPTMR attributes */
+#define KINETIS_LPTMR0_IRQ_VECTOR VectorB0
+
+/*===========================================================================*/
+/* KL25 */
+/*===========================================================================*/
+#if defined(KL25) || defined(__DOXYGEN__)
+
+/* DAC attributes.*/
+#define KINETIS_HAS_DAC0 TRUE
+#define KINTEIS_DAC0_IRQ_VECTOR VectorA4
+
+/* EXT attributes.*/
+#define KINETIS_PORTA_IRQ_VECTOR VectorB8
+#define KINETIS_PORTD_IRQ_VECTOR VectorBC
+#define KINETIS_EXT_HAS_COMMON_CD_IRQ FALSE
+#define KINETIS_EXT_HAS_COMMON_BCDE_IRQ FALSE
+#define KINETIS_GPIO_HAS_OPENDRAIN FALSE
+
+/* I2S attributes.*/
+#define KINETIS_HAS_I2S0 FALSE
+
+/* MCG attributes.*/
+#define KINETIS_HAS_MCG_LITE FALSE
+
+/* Serial attributes */
+#define KINETIS_SERIAL0_IS_UARTLP TRUE
+#define KINETIS_SERIAL0_IS_LPUART FALSE
+#define KINETIS_SERIAL1_IS_LPUART FALSE
+
+/* USB attributes.*/
+#define KINETIS_USB0_IS_USBOTG TRUE
+#define KINETIS_HAS_USB_CLOCK_RECOVERY FALSE
+
+/*===========================================================================*/
+/* KL26 */
+/*===========================================================================*/
+#elif defined(KL26) /* defined(KL25) */
+
+/* DAC attributes.*/
+#define KINETIS_HAS_DAC0 TRUE
+#define KINTEIS_DAC0_IRQ_VECTOR VectorA4
+
+/* EXT attributes.*/
+#define KINETIS_PORTA_IRQ_VECTOR VectorB8
+/* Common IRQ vector for PORTC and PORTD */
+#define KINETIS_PORTD_IRQ_VECTOR VectorBC
+#define KINETIS_EXT_HAS_COMMON_CD_IRQ TRUE
+#define KINETIS_EXT_HAS_COMMON_BCDE_IRQ FALSE
+#define KINETIS_GPIO_HAS_OPENDRAIN FALSE
+
+/* I2S attributes.*/
+#define KINETIS_HAS_I2S0 TRUE
+#define KINETIS_I2S0_IRQ_VECTOR Vector9C
+
+/* MCG attributes.*/
+#define KINETIS_HAS_MCG_LITE FALSE
+
+/* Serial attributes */
+#define KINETIS_SERIAL0_IS_UARTLP TRUE
+#define KINETIS_SERIAL0_IS_LPUART FALSE
+#define KINETIS_SERIAL1_IS_LPUART FALSE
+
+/* USB attributes.*/
+#define KINETIS_USB0_IS_USBOTG TRUE
+#define KINETIS_HAS_USB_CLOCK_RECOVERY FALSE
+
+/*===========================================================================*/
+/* KL27 */
+/*===========================================================================*/
+#elif defined(KL27Zxxx) || defined(KL27Zxx) /* defined(KL26) */
+
+#if !defined(KL27)
+#define KL27
+#endif
+
+/* MCG attributes.*/
+#define KINETIS_HAS_MCG_LITE TRUE
+
+/* Note: on this device, SERIAL2 IRQ is alternatively FlexIO IRQ. */
+/* Serial attributes */
+#define KINETIS_SERIAL0_IS_UARTLP FALSE
+#define KINETIS_SERIAL0_IS_LPUART TRUE
+#define KINETIS_SERIAL1_IS_LPUART TRUE
+
+/* USB attributes.*/
+#define KINETIS_USB0_IS_USBOTG FALSE
+#define KINETIS_HAS_USB_CLOCK_RECOVERY TRUE
+
+/*===========================================================================*/
+/* KL27Zxxx (MKL27Z128* and MKL27Z256*) specific */
+/*===========================================================================*/
+#if defined(KL27Zxxx)
+
+/* DAC attributes.*/
+#define KINETIS_HAS_DAC0 TRUE
+#define KINTEIS_DAC0_IRQ_VECTOR VectorA4
+
+/* EXT attributes.*/
+#define KINETIS_PORTA_IRQ_VECTOR VectorB8
+/* Common IRQ vector for PORTC and PORTD */
+#define KINETIS_PORTD_IRQ_VECTOR VectorBC
+#define KINETIS_EXT_HAS_COMMON_CD_IRQ TRUE
+#define KINETIS_EXT_HAS_COMMON_BCDE_IRQ FALSE
+#define KINETIS_GPIO_HAS_OPENDRAIN FALSE
+
+/* I2S attributes.*/
+#define KINETIS_HAS_I2S0 TRUE
+#define KINETIS_I2S0_IRQ_VECTOR Vector9C
+
+/*===========================================================================*/
+/* KL27Zxx (MKL27Z32* and MKL27Z264*) specific */
+/*===========================================================================*/
+#elif defined(KL27Zxx) /* defined(KL27Zxxx) */
+
+/* Has CRC module */
+/* Does not have USB voltage regulator */
+/* Does have KEEP_ALIVE USB feature */
+
+/* DAC attributes.*/
+#define KINETIS_HAS_DAC0 FALSE
+
+/* EXT attributes.*/
+#define KINETIS_PORTA_IRQ_VECTOR VectorB8
+/* Common IRQ vector for PORTB to PORTE */
+#define KINETIS_PORTD_IRQ_VECTOR VectorBC
+#define KINETIS_EXT_HAS_COMMON_CD_IRQ FALSE
+#define KINETIS_EXT_HAS_COMMON_BCDE_IRQ TRUE
+#define KINETIS_GPIO_HAS_OPENDRAIN FALSE
+
+/* I2S attributes.*/
+#define KINETIS_HAS_I2S0 FALSE
+
+#endif /* defined(KL27Zxx) */
+
+#else /* ! (KL25 || KL26 || KL27) */
+#error MCU type not described in kinetis_registry
+#endif /* KL2Y */
/** @} */
diff --git a/os/hal/ports/KINETIS/KL2x/kinetis_tpm.h b/os/hal/ports/KINETIS/KL2x/kinetis_tpm.h deleted file mode 100644 index 99ffc9c..0000000 --- a/os/hal/ports/KINETIS/KL2x/kinetis_tpm.h +++ /dev/null @@ -1,120 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2014 Adam J. Porter
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file KL2x/kinetis_tpm.h
- * @brief Kinetis TPM registers layout header.
- *
- * @addtogroup HAL
- * @{
- */
-
-#ifndef _KINETIS_TPM_H_
-#define _KINETIS_TPM_H_
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/**
- * @name TPM_SC register
- * @{
- */
-#define TPM_SC_CMOD_DISABLE (0 << 3)
-#define TPM_SC_CMOD_LPTPM_CLK (1 << 3)
-#define TPM_SC_CMOD_LPTPM_EXTCLK (2 << 3)
-#define TPM_SC_CPWMS (1 << 5)
-#define TPM_SC_TOIE (1 << 6)
-#define TPM_SC_TOF (1 << 7)
-#define TPM_SC_DMA (1 << 8)
-/** @} */
-
-/**
- * @name TPM_MOD register
- * @{
- */
-#define TPM_MOD_MASK (0xFFFF)
-/** @} */
-
-/**
- * @name TPM_CnSC register
- * @{
- */
-#define TPM_CnSC_DMA (1 << 0)
-#define TPM_CnSC_ELSA (1 << 2)
-#define TPM_CnSC_ELSB (1 << 3)
-#define TPM_CnSC_MSA (1 << 4)
-#define TPM_CnSC_MSB (1 << 5)
-#define TPM_CnSC_CHIE (1 << 6)
-#define TPM_CnSC_CHF (1 << 7)
-/** @} */
-
-/**
- * @name TPM_CnV register
- * @{
- */
-#define TPM_CnV_VAL_MASK (0xFFFF)
-/** @} */
-
-/**
- * @name TPM_STATUS register
- * @{
- */
-#define TPM_STATUS_CH0F (1 << 0)
-#define TPM_STATUS_CH1F (1 << 1)
-#define TPM_STATUS_CH2F (1 << 2)
-#define TPM_STATUS_CH3F (1 << 3)
-#define TPM_STATUS_CH4F (1 << 4)
-#define TPM_STATUS_CH5F (1 << 5)
-#define TPM_STATUS_TOF (1 << 8)
-/** @} */
-
-/**
- * @name TPM_CONF register
- * @{
- */
-#define TPM_CONF_DOZEEN (1 << 5)
-#define TPM_CONF_DBGMODE_CONT (3 << 6)
-#define TPM_CONF_DBGMODE_PAUSE (0 << 6)
-#define TPM_CONF_GTBEEN (1 << 9)
-#define TPM_CONF_CSOT (1 << 16)
-#define TPM_CONF_CSOO (1 << 17)
-#define TPM_CONF_CROT (1 << 18)
-#define TPM_CONF_TRGSEL(n) ((n) << 24)
-/** @{ */
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-#endif /* _KINETIS_TPM_H_ */
-
-/** @} */
diff --git a/os/hal/ports/KINETIS/KL2x/kl25z.h b/os/hal/ports/KINETIS/KL2x/kl25z.h deleted file mode 100644 index 4e9547f..0000000 --- a/os/hal/ports/KINETIS/KL2x/kl25z.h +++ /dev/null @@ -1,1190 +0,0 @@ -/* - * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#ifndef _KL25Z_H_ -#define _KL25Z_H_ - -/* - * ============================================================== - * ---------- Interrupt Number Definition ----------------------- - * ============================================================== - */ -typedef enum IRQn -{ -/****** Cortex-M0 Processor Exceptions Numbers ****************/ - Reset_IRQn = -15, - NonMaskableInt_IRQn = -14, - HardFault_IRQn = -13, - SVCall_IRQn = -5, - PendSV_IRQn = -2, - SysTick_IRQn = -1, - -/****** KL2x Specific Interrupt Numbers ***********************/ - DMA0_IRQn = 0, - DMA1_IRQn = 1, - DMA2_IRQn = 2, - DMA3_IRQn = 3, - Reserved0_IRQn = 4, - FTFA_IRQn = 5, - PMC_IRQn = 6, - LLWU_IRQn = 7, - I2C0_IRQn = 8, - I2C1_IRQn = 9, - SPI0_IRQn = 10, - SPI1_IRQn = 11, - UART0_IRQn = 12, - UART1_IRQn = 13, - UART2_IRQn = 14, - ADC0_IRQn = 15, - CMP0_IRQn = 16, - TPM0_IRQn = 17, - TPM1_IRQn = 18, - TPM2_IRQn = 19, - RTC0_IRQn = 20, - RTC1_IRQn = 21, - PIT_IRQn = 22, - Reserved1_IRQn = 23, - USB_OTG_IRQn = 24, - DAC0_IRQn = 25, - TSI0_IRQn = 26, - MCG_IRQn = 27, - LPTMR0_IRQn = 28, - Reserved2_IRQn = 29, - PINA_IRQn = 30, - PIND_IRQn = 31, -} IRQn_Type; - -/* - * ========================================================================== - * ----------- Processor and Core Peripheral Section ------------------------ - * ========================================================================== - */ - -/** - * @brief KL2x Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -#define __MPU_PRESENT 0 -#define __VTOR_PRESENT 1 -#define __NVIC_PRIO_BITS 2 -#define __Vendor_SysTickConfig 0 - -#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ - -typedef struct -{ - __IO uint32_t SOPT1; - __IO uint32_t SOPT1CFG; - uint32_t RESERVED0[1023]; - __IO uint32_t SOPT2; - __I uint32_t RESERVED1[1]; - __IO uint32_t SOPT4; - __IO uint32_t SOPT5; - uint32_t RESERVED2[1]; - __IO uint32_t SOPT7; - uint32_t RESERVED3[2]; - __IO uint32_t SDID; - uint32_t RESERVED4[3]; - __IO uint32_t SCGC4; - __IO uint32_t SCGC5; - __IO uint32_t SCGC6; - __IO uint32_t SCGC7; - __IO uint32_t CLKDIV1; - uint32_t RESERVED5[1]; - __IO uint32_t FCFG1; - __IO uint32_t FCFG2; - uint32_t RESERVED6[1]; - __IO uint32_t UIDMH; - __IO uint32_t UIDML; - __IO uint32_t UIDL; - uint32_t RESERVED7[39]; - __IO uint32_t COPC; - __IO uint32_t SRVCOP; -} SIM_TypeDef; - -typedef struct -{ - __IO uint8_t PE1; - __IO uint8_t PE2; - __IO uint8_t PE3; - __IO uint8_t PE4; - __IO uint8_t ME; - __IO uint8_t F1; - __IO uint8_t F2; - __I uint8_t F3; - __IO uint8_t FILT1; - __IO uint8_t FILT2; -} LLWU_TypeDef; - -typedef struct -{ - __IO uint32_t PCR[32]; - __IO uint32_t GPCLR; - __IO uint32_t GPCHR; - uint32_t RESERVED0[6]; - __IO uint32_t ISFR; -} PORT_TypeDef; - -typedef struct -{ - __IO uint8_t C1; - __IO uint8_t C2; - __IO uint8_t C3; - __IO uint8_t C4; - __IO uint8_t C5; - __IO uint8_t C6; - __IO uint8_t S; - uint8_t RESERVED0[1]; - __IO uint8_t SC; - uint8_t RESERVED1[1]; - __IO uint8_t ATCVH; - __IO uint8_t ATCVL; - __IO uint8_t C7; - __IO uint8_t C8; - __IO uint8_t C9; - __IO uint8_t C10; -} MCG_TypeDef; - -typedef struct -{ - __IO uint8_t CR; -} OSC_TypeDef; - -typedef struct -{ - __IO uint32_t SAR; - __IO uint32_t DAR; - __IO uint32_t DSR_BCR; - __IO uint32_t DCR; -} DMAChannel_TypeDef; - -typedef struct -{ - DMAChannel_TypeDef ch[4]; -} DMA_TypeDef; - -typedef struct -{ - __IO uint8_t CHCFG[4]; -} DMAMUX_TypeDef; - -typedef struct -{ - __IO uint32_t SC; - __IO uint32_t CNT; - __IO uint32_t MOD; - struct { // Channels - __IO uint32_t SC; - __IO uint32_t V; - } C[6]; - uint32_t RESERVED0[5]; - __IO uint32_t STATUS; - uint32_t RESERVED1[12]; - __IO uint32_t CONF; -} TPM_TypeDef; - -typedef struct -{ - __IO uint32_t SC1A; // ADC Status and Control Registers 1 - __IO uint32_t SC1B; // ADC Status and Control Registers 1 - __IO uint32_t CFG1; // ADC Configuration Register 1 - __IO uint32_t CFG2; // ADC Configuration Register 2 - __I uint32_t RA; // ADC Data Result Register - __I uint32_t RB; // ADC Data Result Register - __IO uint32_t CV1; // Compare Value Registers - __IO uint32_t CV2; // Compare Value Registers - __IO uint32_t SC2; // Status and Control Register 2 - __IO uint32_t SC3; // Status and Control Register 3 - __IO uint32_t OFS; // ADC Offset Correction Register - __IO uint32_t PG; // ADC Plus-Side Gain Register - __IO uint32_t MG; // ADC Minus-Side Gain Register - __IO uint32_t CLPD; // ADC Plus-Side General Calibration Value Register - __IO uint32_t CLPS; // ADC Plus-Side General Calibration Value Register - __IO uint32_t CLP4; // ADC Plus-Side General Calibration Value Register - __IO uint32_t CLP3; // ADC Plus-Side General Calibration Value Register - __IO uint32_t CLP2; // ADC Plus-Side General Calibration Value Register - __IO uint32_t CLP1; // ADC Plus-Side General Calibration Value Register - __IO uint32_t CLP0; // ADC Plus-Side General Calibration Value Register - uint32_t RESERVED0[1]; // ADC Minus-Side General Calibration Value Register - __IO uint32_t CLMD; // ADC Minus-Side General Calibration Value Register - __IO uint32_t CLMS; // ADC Minus-Side General Calibration Value Register - __IO uint32_t CLM4; // ADC Minus-Side General Calibration Value Register - __IO uint32_t CLM3; // ADC Minus-Side General Calibration Value Register - __IO uint32_t CLM2; // ADC Minus-Side General Calibration Value Register - __IO uint32_t CLM1; // ADC Minus-Side General Calibration Value Register - __IO uint32_t CLM0; // ADC Minus-Side General Calibration Value Register -} ADC_TypeDef; - -typedef struct -{ - __IO uint32_t CSR; - __IO uint32_t PSR; - __IO uint32_t CMR; - __I uint32_t CNR; -} LPTMR_TypeDef; - -typedef struct -{ - __IO uint32_t GENCS; - __IO uint32_t DATA; - __IO uint32_t TSHD; -} TSI_TypeDef; - -typedef struct -{ - __IO uint32_t PDOR; - __IO uint32_t PSOR; - __IO uint32_t PCOR; - __IO uint32_t PTOR; - __IO uint32_t PDIR; - __IO uint32_t PDDR; -} GPIO_TypeDef; - -typedef struct -{ - __IO uint8_t C1; - __IO uint8_t C2; - __IO uint8_t BR; - __IO uint8_t S; - uint8_t RESERVED0[1]; - __IO uint8_t D; - uint8_t RESERVED1[1]; - __IO uint8_t M; -} SPI_TypeDef; - -typedef struct -{ - __IO uint8_t A1; - __IO uint8_t F; - __IO uint8_t C1; - __IO uint8_t S; - __IO uint8_t D; - __IO uint8_t C2; - __IO uint8_t FLT; - __IO uint8_t RA; - __IO uint8_t SMB; - __IO uint8_t A2; - __IO uint8_t SLTH; - __IO uint8_t SLTL; -} I2C_TypeDef; - -typedef struct -{ - __IO uint8_t BDH; - __IO uint8_t BDL; - __IO uint8_t C1; - __IO uint8_t C2; - __IO uint8_t S1; - __IO uint8_t S2; - __IO uint8_t C3; - __IO uint8_t D; - __IO uint8_t C4; -} UART_TypeDef; - -typedef struct -{ - __IO uint8_t BDH; - __IO uint8_t BDL; - __IO uint8_t C1; - __IO uint8_t C2; - __IO uint8_t S1; - __IO uint8_t S2; - __IO uint8_t C3; - __IO uint8_t D; - __IO uint8_t MA1; - __IO uint8_t MA2; - __IO uint8_t C4; - __IO uint8_t C5; -} UARTLP_TypeDef; - -typedef struct -{ - __IO uint8_t LVDSC1; - __IO uint8_t LVDSC2; - __IO uint8_t REGSC; -} PMC_TypeDef; - -/****************************************************************/ -/* Peripheral memory map */ -/****************************************************************/ -#define DMA_BASE ((uint32_t)0x40008100) -#define DMAMUX_BASE ((uint32_t)0x40021000) -#define TPM0_BASE ((uint32_t)0x40038000) -#define TPM1_BASE ((uint32_t)0x40039000) -#define TPM2_BASE ((uint32_t)0x4003A000) -#define ADC0_BASE ((uint32_t)0x4003B000) -#define LPTMR0_BASE ((uint32_t)0x40040000) -#define TSI0_BASE ((uint32_t)0x40045000) -#define SIM_BASE ((uint32_t)0x40047000) -#define PORTA_BASE ((uint32_t)0x40049000) -#define PORTB_BASE ((uint32_t)0x4004A000) -#define PORTC_BASE ((uint32_t)0x4004B000) -#define PORTD_BASE ((uint32_t)0x4004C000) -#define PORTE_BASE ((uint32_t)0x4004D000) -#define MCG_BASE ((uint32_t)0x40064000) -#define OSC0_BASE ((uint32_t)0x40065000) -#define I2C0_BASE ((uint32_t)0x40066000) -#define I2C1_BASE ((uint32_t)0x40067000) -#define UART0_BASE ((uint32_t)0x4006A000) -#define UART1_BASE ((uint32_t)0x4006B000) -#define UART2_BASE ((uint32_t)0x4006C000) -#define SPI0_BASE ((uint32_t)0x40076000) -#define SPI1_BASE ((uint32_t)0x40077000) -#define LLWU_BASE ((uint32_t)0x4007C000) -#define PMC_BASE ((uint32_t)0x4007D000) -#define GPIOA_BASE ((uint32_t)0x400FF000) -#define GPIOB_BASE ((uint32_t)0x400FF040) -#define GPIOC_BASE ((uint32_t)0x400FF080) -#define GPIOD_BASE ((uint32_t)0x400FF0C0) -#define GPIOE_BASE ((uint32_t)0x400FF100) - -/****************************************************************/ -/* Peripheral declaration */ -/****************************************************************/ -#define DMA ((DMA_TypeDef *) DMA_BASE) -#define DMAMUX ((DMAMUX_TypeDef *) DMAMUX_BASE) -#define TPM0 ((TPM_TypeDef *) TPM0_BASE) -#define TPM1 ((TPM_TypeDef *) TPM1_BASE) -#define TPM2 ((TPM_TypeDef *) TPM2_BASE) -#define ADC0 ((ADC_TypeDef *) ADC0_BASE) -#define LPTMR0 ((LPTMR_TypeDef *) LPTMR0_BASE) -#define TSI0 ((TSI_TypeDef *) TSI0_BASE) -#define SIM ((SIM_TypeDef *) SIM_BASE) -#define LLWU ((LLWU_TypeDef *) LLWU_BASE) -#define PMC ((PMC_TypeDef *) PMC_BASE) -#define PORTA ((PORT_TypeDef *) PORTA_BASE) -#define PORTB ((PORT_TypeDef *) PORTB_BASE) -#define PORTC ((PORT_TypeDef *) PORTC_BASE) -#define PORTD ((PORT_TypeDef *) PORTD_BASE) -#define PORTE ((PORT_TypeDef *) PORTE_BASE) -#define MCG ((MCG_TypeDef *) MCG_BASE) -#define OSC0 ((OSC_TypeDef *) OSC0_BASE) -#define SPI0 ((SPI_TypeDef *) SPI0_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define I2C0 ((I2C_TypeDef *) I2C0_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define UART0 ((UARTLP_TypeDef *) UART0_BASE) -#define UART1 ((UART_TypeDef *) UART1_BASE) -#define UART2 ((UART_TypeDef *) UART2_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) - -/****************************************************************/ -/* Peripheral Registers Bits Definition */ -/****************************************************************/ - -/****************************************************************/ -/* */ -/* System Integration Module (SIM) */ -/* */ -/****************************************************************/ -/********* Bits definition for SIM_SOPT1 register *************/ -#define SIM_SOPT1_USBREGEN ((uint32_t)0x80000000) /*!< USB voltage regulator enable */ -#define SIM_SOPT1_USBSSTBY ((uint32_t)0x40000000) /*!< USB voltage regulator in standby mode during Stop, VLPS, LLS and VLLS modes */ -#define SIM_SOPT1_USBVSTBY ((uint32_t)0x20000000) /*!< USB voltage regulator in standby mode during VLPR and VLPW modes */ -#define SIM_SOPT1_OSC32KSEL_SHIFT 18 /*!< 32K oscillator clock select (shift) */ -#define SIM_SOPT1_OSC32KSEL_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT1_OSC32KSEL_SHIFT)) /*!< 32K oscillator clock select (mask) */ -#define SIM_SOPT1_OSC32KSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT1_OSC32KSEL_SHIFT) & SIM_SOPT1_OSC32KSEL_MASK)) /*!< 32K oscillator clock select */ - -/******* Bits definition for SIM_SOPT1CFG register ************/ -#define SIM_SOPT1CFG_USSWE ((uint32_t)0x04000000) /*!< USB voltage regulator stop standby write enable */ -#define SIM_SOPT1CFG_UVSWE ((uint32_t)0x02000000) /*!< USB voltage regulator VLP standby write enable */ -#define SIM_SOPT1CFG_URWE ((uint32_t)0x01000000) /*!< USB voltage regulator voltage regulator write enable */ - -/******* Bits definition for SIM_SOPT2 register ************/ -#define SIM_SOPT2_UART0SRC_SHIFT 26 /*!< UART0 clock source select (shift) */ -#define SIM_SOPT2_UART0SRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT2_UART0SRC_SHIFT)) /*!< UART0 clock source select (mask) */ -#define SIM_SOPT2_UART0SRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_UART0SRC_SHIFT) & SIM_SOPT2_UART0SRC_MASK)) /*!< UART0 clock source select */ -#define SIM_SOPT2_TPMSRC_SHIFT 24 /*!< TPM clock source select (shift) */ -#define SIM_SOPT2_TPMSRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT2_TPMSRC_SHIFT)) /*!< TPM clock source select (mask) */ -#define SIM_SOPT2_TPMSRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_TPMSRC_SHIFT) & SIM_SOPT2_TPMSRC_MASK)) /*!< TPM clock source select */ -#define SIM_SOPT2_USBSRC ((uint32_t)0x00040000) /*!< USB clock source select */ -#define SIM_SOPT2_PLLFLLSEL ((uint32_t)0x00010000) /*!< PLL/FLL clock select */ -#define SIM_SOPT2_CLKOUTSEL_SHIFT 5 /*!< CLKOUT select (shift) */ -#define SIM_SOPT2_CLKOUTSEL_MASK ((uint32_t)((uint32_t)0x07 << SIM_SOPT2_CLKOUTSEL_SHIFT)) /*!< CLKOUT select (mask) */ -#define SIM_SOPT2_CLKOUTSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_CLKOUTSEL_SHIFT) & SIM_SOPT2_CLKOUTSEL_MASK)) /*!< CLKOUT select */ -#define SIM_SOPT2_RTCCLKOUTSEL ((uint32_t)0x00000010) /*!< RTC clock out select */ - -/******* Bits definition for SIM_SCGC4 register ************/ -#define SIM_SCGC4_SPI1 ((uint32_t)0x00800000) /*!< SPI1 Clock Gate Control */ -#define SIM_SCGC4_SPI0 ((uint32_t)0x00400000) /*!< SPI0 Clock Gate Control */ -#define SIM_SCGC4_CMP ((uint32_t)0x00080000) /*!< Comparator Clock Gate Control */ -#define SIM_SCGC4_USBOTG ((uint32_t)0x00040000) /*!< USB Clock Gate Control */ -#define SIM_SCGC4_UART2 ((uint32_t)0x00001000) /*!< UART2 Clock Gate Control */ -#define SIM_SCGC4_UART1 ((uint32_t)0x00000800) /*!< UART1 Clock Gate Control */ -#define SIM_SCGC4_UART0 ((uint32_t)0x00000400) /*!< UART0 Clock Gate Control */ -#define SIM_SCGC4_I2C1 ((uint32_t)0x00000080) /*!< I2C1 Clock Gate Control */ -#define SIM_SCGC4_I2C0 ((uint32_t)0x00000040) /*!< I2C0 Clock Gate Control */ - -/******* Bits definition for SIM_SCGC5 register ************/ -#define SIM_SCGC5_PORTE ((uint32_t)0x00002000) /*!< Port E Clock Gate Control */ -#define SIM_SCGC5_PORTD ((uint32_t)0x00001000) /*!< Port D Clock Gate Control */ -#define SIM_SCGC5_PORTC ((uint32_t)0x00000800) /*!< Port C Clock Gate Control */ -#define SIM_SCGC5_PORTB ((uint32_t)0x00000400) /*!< Port B Clock Gate Control */ -#define SIM_SCGC5_PORTA ((uint32_t)0x00000200) /*!< Port A Clock Gate Control */ -#define SIM_SCGC5_TSI ((uint32_t)0x00000020) /*!< TSI Access Control */ -#define SIM_SCGC5_LPTMR ((uint32_t)0x00000001) /*!< Low Power Timer Access Control */ - -/******* Bits definition for SIM_SCGC6 register ************/ -#define SIM_SCGC6_DAC0 ((uint32_t)0x80000000) /*!< DAC0 Clock Gate Control */ -#define SIM_SCGC6_RTC ((uint32_t)0x20000000) /*!< RTC Access Control */ -#define SIM_SCGC6_ADC0 ((uint32_t)0x08000000) /*!< ADC0 Clock Gate Control */ -#define SIM_SCGC6_TPM2 ((uint32_t)0x04000000) /*!< TPM2 Clock Gate Control */ -#define SIM_SCGC6_TPM1 ((uint32_t)0x02000000) /*!< TPM1 Clock Gate Control */ -#define SIM_SCGC6_TPM0 ((uint32_t)0x01000000) /*!< TPM0 Clock Gate Control */ -#define SIM_SCGC6_PIT ((uint32_t)0x00800000) /*!< PIT Clock Gate Control */ -#define SIM_SCGC6_DMAMUX ((uint32_t)0x00000002) /*!< DMA Mux Clock Gate Control */ -#define SIM_SCGC6_FTF ((uint32_t)0x00000001) /*!< Flash Memory Clock Gate Control */ - -/******* Bits definition for SIM_SCGC6 register ************/ -#define SIM_SCGC7_DMA ((uint32_t)0x00000100) /*!< DMA Clock Gate Control */ - -/****** Bits definition for SIM_CLKDIV1 register ***********/ -#define SIM_CLKDIV1_OUTDIV1_SHIFT 28 /*!< Clock 1 output divider value (shift) */ -#define SIM_CLKDIV1_OUTDIV1_MASK ((uint32_t)((uint32_t)0x0F << SIM_CLKDIV1_OUTDIV1_SHIFT)) /*!< Clock 1 output divider value (mask) */ -#define SIM_CLKDIV1_OUTDIV1(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV1_SHIFT) & SIM_CLKDIV1_OUTDIV1_MASK)) /*!< Clock 1 output divider value */ -#define SIM_CLKDIV1_OUTDIV4_SHIFT 16 /*!< Clock 4 output divider value (shift) */ -#define SIM_CLKDIV1_OUTDIV4_MASK ((uint32_t)((uint32_t)0x07 << SIM_CLKDIV1_OUTDIV4_SHIFT)) /*!< Clock 4 output divider value (mask) */ -#define SIM_CLKDIV1_OUTDIV4(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV4_SHIFT) & SIM_CLKDIV1_OUTDIV4_MASK)) /*!< Clock 4 output divider value */ - -/****************************************************************/ -/* */ -/* Low-Leakage Wakeup Unit (LLWU) */ -/* */ -/****************************************************************/ -/********** Bits definition for LLWU_PE1 register *************/ -#define LLWU_PE1_WUPE3_SHIFT 6 /*!< Wakeup Pin Enable for LLWU_P3 (shift) */ -#define LLWU_PE1_WUPE3_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE1_WUPE3_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P3 (mask) */ -#define LLWU_PE1_WUPE3(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE1_WUPE3_SHIFT) & LLWU_PE1_WUPE3_MASK)) /*!< Wakeup Pin Enable for LLWU_P3 */ -#define LLWU_PE1_WUPE2_SHIFT 4 /*!< Wakeup Pin Enable for LLWU_P2 (shift) */ -#define LLWU_PE1_WUPE2_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE1_WUPE2_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P2 (mask) */ -#define LLWU_PE1_WUPE2(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE1_WUPE2_SHIFT) & LLWU_PE1_WUPE2_MASK)) /*!< Wakeup Pin Enable for LLWU_P2 */ -#define LLWU_PE1_WUPE1_SHIFT 2 /*!< Wakeup Pin Enable for LLWU_P1 (shift) */ -#define LLWU_PE1_WUPE1_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE1_WUPE1_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P1 (mask) */ -#define LLWU_PE1_WUPE1(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE1_WUPE1_SHIFT) & LLWU_PE1_WUPE1_MASK)) /*!< Wakeup Pin Enable for LLWU_P1 */ -#define LLWU_PE1_WUPE0_SHIFT 0 /*!< Wakeup Pin Enable for LLWU_P0 (shift) */ -#define LLWU_PE1_WUPE0_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE1_WUPE0_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P0 (mask) */ -#define LLWU_PE1_WUPE0(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE1_WUPE0_SHIFT) & LLWU_PE1_WUPE0_MASK)) /*!< Wakeup Pin Enable for LLWU_P0 */ - -/********** Bits definition for LLWU_PE2 register *************/ -#define LLWU_PE2_WUPE7_SHIFT 6 /*!< Wakeup Pin Enable for LLWU_P7 (shift) */ -#define LLWU_PE2_WUPE7_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE2_WUPE7_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P7 (mask) */ -#define LLWU_PE2_WUPE7(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE2_WUPE7_SHIFT) & LLWU_PE2_WUPE7_MASK)) /*!< Wakeup Pin Enable for LLWU_P7 */ -#define LLWU_PE2_WUPE6_SHIFT 4 /*!< Wakeup Pin Enable for LLWU_P6 (shift) */ -#define LLWU_PE2_WUPE6_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE2_WUPE6_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P6 (mask) */ -#define LLWU_PE2_WUPE6(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE2_WUPE6_SHIFT) & LLWU_PE2_WUPE6_MASK)) /*!< Wakeup Pin Enable for LLWU_P6 */ -#define LLWU_PE2_WUPE5_SHIFT 2 /*!< Wakeup Pin Enable for LLWU_P5 (shift) */ -#define LLWU_PE2_WUPE5_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE2_WUPE5_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P5 (mask) */ -#define LLWU_PE2_WUPE5(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE2_WUPE5_SHIFT) & LLWU_PE2_WUPE5_MASK)) /*!< Wakeup Pin Enable for LLWU_P5 */ -#define LLWU_PE2_WUPE4_SHIFT 0 /*!< Wakeup Pin Enable for LLWU_P4 (shift) */ -#define LLWU_PE2_WUPE4_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE2_WUPE4_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P4 (mask) */ -#define LLWU_PE2_WUPE4(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE2_WUPE4_SHIFT) & LLWU_PE2_WUPE4_MASK)) /*!< Wakeup Pin Enable for LLWU_P4 */ - -/********** Bits definition for LLWU_PE3 register *************/ -#define LLWU_PE3_WUPE11_SHIFT 6 /*!< Wakeup Pin Enable for LLWU_P11 (shift) */ -#define LLWU_PE3_WUPE11_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE3_WUPE11_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P11 (mask) */ -#define LLWU_PE3_WUPE11(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE3_WUPE11_SHIFT) & LLWU_PE3_WUPE11_MASK)) /*!< Wakeup Pin Enable for LLWU_P11 */ -#define LLWU_PE3_WUPE10_SHIFT 4 /*!< Wakeup Pin Enable for LLWU_P10 (shift) */ -#define LLWU_PE3_WUPE10_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE3_WUPE10_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P10 (mask) */ -#define LLWU_PE3_WUPE10(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE3_WUPE10_SHIFT) & LLWU_PE3_WUPE10_MASK)) /*!< Wakeup Pin Enable for LLWU_P10 */ -#define LLWU_PE3_WUPE13_SHIFT 2 /*!< Wakeup Pin Enable for LLWU_P9 (shift) */ -#define LLWU_PE3_WUPE13_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE3_WUPE13_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P9 (mask) */ -#define LLWU_PE3_WUPE13(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE3_WUPE13_SHIFT) & LLWU_PE3_WUPE13_MASK)) /*!< Wakeup Pin Enable for LLWU_P9 */ -#define LLWU_PE3_WUPE8_SHIFT 0 /*!< Wakeup Pin Enable for LLWU_P8 (shift) */ -#define LLWU_PE3_WUPE8_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE3_WUPE8_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P8 (mask) */ -#define LLWU_PE3_WUPE8(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE3_WUPE8_SHIFT) & LLWU_PE3_WUPE8_MASK)) /*!< Wakeup Pin Enable for LLWU_P8 */ - -/********** Bits definition for LLWU_PE4 register *************/ -#define LLWU_PE4_WUPE15_SHIFT 6 /*!< Wakeup Pin Enable for LLWU_P15 (shift) */ -#define LLWU_PE4_WUPE15_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE4_WUPE15_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P15 (mask) */ -#define LLWU_PE4_WUPE15(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE4_WUPE15_SHIFT) & LLWU_PE4_WUPE15_MASK)) /*!< Wakeup Pin Enable for LLWU_P15 */ -#define LLWU_PE4_WUPE14_SHIFT 4 /*!< Wakeup Pin Enable for LLWU_P14 (shift) */ -#define LLWU_PE4_WUPE14_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE4_WUPE14_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P14 (mask) */ -#define LLWU_PE4_WUPE14(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE4_WUPE14_SHIFT) & LLWU_PE4_WUPE14_MASK)) /*!< Wakeup Pin Enable for LLWU_P14 */ -#define LLWU_PE4_WUPE13_SHIFT 2 /*!< Wakeup Pin Enable for LLWU_P13 (shift) */ -#define LLWU_PE4_WUPE13_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE4_WUPE13_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P13 (mask) */ -#define LLWU_PE4_WUPE13(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE4_WUPE13_SHIFT) & LLWU_PE4_WUPE13_MASK)) /*!< Wakeup Pin Enable for LLWU_P13 */ -#define LLWU_PE4_WUPE12_SHIFT 0 /*!< Wakeup Pin Enable for LLWU_P12 (shift) */ -#define LLWU_PE4_WUPE12_MASK ((uint8_t)((uint8_t)0x03 << LLWU_PE4_WUPE12_SHIFT)) /*!< Wakeup Pin Enable for LLWU_P12 (mask) */ -#define LLWU_PE4_WUPE12(x) ((uint8_t)(((uint8_t)(x) << LLWU_PE4_WUPE12_SHIFT) & LLWU_PE4_WUPE12_MASK)) /*!< Wakeup Pin Enable for LLWU_P12 */ - -/********** Bits definition for LLWU_ME register *************/ -#define LLWU_ME_WUME7 ((uint8_t)((uint8_t)1 << 7)) /*!< Wakeup Module Enable for Module 7 */ -#define LLWU_ME_WUME6 ((uint8_t)((uint8_t)1 << 6)) /*!< Wakeup Module Enable for Module 6 */ -#define LLWU_ME_WUME5 ((uint8_t)((uint8_t)1 << 5)) /*!< Wakeup Module Enable for Module 5 */ -#define LLWU_ME_WUME4 ((uint8_t)((uint8_t)1 << 4)) /*!< Wakeup Module Enable for Module 4 */ -#define LLWU_ME_WUME3 ((uint8_t)((uint8_t)1 << 3)) /*!< Wakeup Module Enable for Module 3 */ -#define LLWU_ME_WUME2 ((uint8_t)((uint8_t)1 << 2)) /*!< Wakeup Module Enable for Module 2 */ -#define LLWU_ME_WUME1 ((uint8_t)((uint8_t)1 << 1)) /*!< Wakeup Module Enable for Module 1 */ -#define LLWU_ME_WUME0 ((uint8_t)((uint8_t)1 << 0)) /*!< Wakeup Module Enable for Module 0 */ - -/********** Bits definition for LLWU_F1 register *************/ -#define LLWU_F1_WUF7 ((uint8_t)((uint8_t)1 << 7)) /*!< Wakeup Flag for LLWU_P7 */ -#define LLWU_F1_WUF6 ((uint8_t)((uint8_t)1 << 6)) /*!< Wakeup Flag for LLWU_P6 */ -#define LLWU_F1_WUF5 ((uint8_t)((uint8_t)1 << 5)) /*!< Wakeup Flag for LLWU_P5 */ -#define LLWU_F1_WUF4 ((uint8_t)((uint8_t)1 << 4)) /*!< Wakeup Flag for LLWU_P4 */ -#define LLWU_F1_WUF3 ((uint8_t)((uint8_t)1 << 3)) /*!< Wakeup Flag for LLWU_P3 */ -#define LLWU_F1_WUF2 ((uint8_t)((uint8_t)1 << 2)) /*!< Wakeup Flag for LLWU_P2 */ -#define LLWU_F1_WUF1 ((uint8_t)((uint8_t)1 << 1)) /*!< Wakeup Flag for LLWU_P1 */ -#define LLWU_F1_WUF0 ((uint8_t)((uint8_t)1 << 0)) /*!< Wakeup Flag for LLWU_P0 */ - -/********** Bits definition for LLWU_F2 register *************/ -#define LLWU_F2_WUF15 ((uint8_t)((uint8_t)1 << 7)) /*!< Wakeup Flag for LLWU_P15 */ -#define LLWU_F2_WUF14 ((uint8_t)((uint8_t)1 << 6)) /*!< Wakeup Flag for LLWU_P14 */ -#define LLWU_F2_WUF13 ((uint8_t)((uint8_t)1 << 5)) /*!< Wakeup Flag for LLWU_P13 */ -#define LLWU_F2_WUF12 ((uint8_t)((uint8_t)1 << 4)) /*!< Wakeup Flag for LLWU_P12 */ -#define LLWU_F2_WUF11 ((uint8_t)((uint8_t)1 << 3)) /*!< Wakeup Flag for LLWU_P11 */ -#define LLWU_F2_WUF10 ((uint8_t)((uint8_t)1 << 2)) /*!< Wakeup Flag for LLWU_P10 */ -#define LLWU_F2_WUF9 ((uint8_t)((uint8_t)1 << 1)) /*!< Wakeup Flag for LLWU_P9 */ -#define LLWU_F2_WUF8 ((uint8_t)((uint8_t)1 << 0)) /*!< Wakeup Flag for LLWU_P8 */ - -/********** Bits definition for LLWU_F3 register *************/ -#define LLWU_F3_MWUF7 ((uint8_t)((uint8_t)1 << 7)) /*!< Wakeup Flag for Module 7 */ -#define LLWU_F3_MWUF6 ((uint8_t)((uint8_t)1 << 6)) /*!< Wakeup Flag for Module 6 */ -#define LLWU_F3_MWUF5 ((uint8_t)((uint8_t)1 << 5)) /*!< Wakeup Flag for Module 5 */ -#define LLWU_F3_MWUF4 ((uint8_t)((uint8_t)1 << 4)) /*!< Wakeup Flag for Module 4 */ -#define LLWU_F3_MWUF3 ((uint8_t)((uint8_t)1 << 3)) /*!< Wakeup Flag for Module 3 */ -#define LLWU_F3_MWUF2 ((uint8_t)((uint8_t)1 << 2)) /*!< Wakeup Flag for Module 2 */ -#define LLWU_F3_MWUF1 ((uint8_t)((uint8_t)1 << 1)) /*!< Wakeup Flag for Module 1 */ -#define LLWU_F3_MWUF0 ((uint8_t)((uint8_t)1 << 0)) /*!< Wakeup Flag for Module 0 */ - -/********** Bits definition for LLWU_FILT1 register *************/ -#define LLWU_FILT1_FILTF ((uint8_t)((uint8_t)1 << 7)) /*!< Filter Detect Flag */ -#define LLWU_FILT1_FILTE_SHIFT 5 /*!< Digital Filter on External Pin (shift) */ -#define LLWU_FILT1_FILTE_MASK ((uint8_t)((uint8_t)0x03 << LLWU_FILT1_FILTE_SHIFT)) /*!< Digital Filter on External Pin (mask) */ -#define LLWU_FILT1_FILTE(x) ((uint8_t)(((uint8_t)(x) << LLWU_FILT1_FILTE_SHIFT) & LLWU_FILT1_FILTE_MASK)) /*!< Digital Filter on External Pin */ -#define LLWU_FILT1_FILTE_DISABLED LLWU_FILT1_FILTE(0) /*!< Filter disabled */ -#define LLWU_FILT1_FILTE_POSEDGE LLWU_FILT1_FILTE(1) /*!< Filter posedge detect enabled */ -#define LLWU_FILT1_FILTE_NEGEDGE LLWU_FILT1_FILTE(2) /*!< Filter negedge detect enabled */ -#define LLWU_FILT1_FILTE_ANYEDGE LLWU_FILT1_FILTE(3) /*!< Filter any edge detect enabled */ -#define LLWU_FILT1_FILTSEL_SHIFT 0 /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) (shift) */ -#define LLWU_FILT1_FILTSEL_MASK ((uint8_t)((uint8_t)0x0F << LLWU_FILT1_FILTSEL_SHIFT)) /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) (mask) */ -#define LLWU_FILT1_FILTSEL(x) ((uint8_t)(((uint8_t)(x) << LLWU_FILT1_FILTSEL_SHIFT) & LLWU_FILT1_FILTSEL_MASK)) /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) */ - -/********** Bits definition for LLWU_FILT2 register *************/ -#define LLWU_FILT2_FILTF ((uint8_t)((uint8_t)1 << 7)) /*!< Filter Detect Flag */ -#define LLWU_FILT2_FILTE_SHIFT 5 /*!< Digital Filter on External Pin (shift) */ -#define LLWU_FILT2_FILTE_MASK ((uint8_t)((uint8_t)0x03 << LLWU_FILT2_FILTE_SHIFT)) /*!< Digital Filter on External Pin (mask) */ -#define LLWU_FILT2_FILTE(x) ((uint8_t)(((uint8_t)(x) << LLWU_FILT2_FILTE_SHIFT) & LLWU_FILT2_FILTE_MASK)) /*!< Digital Filter on External Pin */ -#define LLWU_FILT2_FILTE_DISABLED LLWU_FILT2_FILTE(0) /*!< Filter disabled */ -#define LLWU_FILT2_FILTE_POSEDGE LLWU_FILT2_FILTE(1) /*!< Filter posedge detect enabled */ -#define LLWU_FILT2_FILTE_NEGEDGE LLWU_FILT2_FILTE(2) /*!< Filter negedge detect enabled */ -#define LLWU_FILT2_FILTE_ANYEDGE LLWU_FILT2_FILTE(3) /*!< Filter any edge detect enabled */ -#define LLWU_FILT2_FILTSEL_SHIFT 0 /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) (shift) */ -#define LLWU_FILT2_FILTSEL_MASK ((uint8_t)((uint8_t)0x0F << LLWU_FILT2_FILTSEL_SHIFT)) /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) (mask) */ -#define LLWU_FILT2_FILTSEL(x) ((uint8_t)(((uint8_t)(x) << LLWU_FILT2_FILTSEL_SHIFT) & LLWU_FILT2_FILTSEL_MASK)) /*!< Filter Pin Select (LLWU_P0 ... LLWU_P15) */ - -/****************************************************************/ -/* */ -/* Port Control and interrupts (PORT) */ -/* */ -/****************************************************************/ -/******** Bits definition for PORTx_PCRn register *************/ -#define PORTx_PCRn_ISR ((uint32_t)0x01000000) /*!< Interrupt Status Flag */ -#define PORTx_PCRn_IRQC_SHIFT 16 -#define PORTx_PCRn_IRQC_MASK ((uint32_t)0x000F0000) /*!< Interrupt Configuration */ -#define PORTx_PCRn_IRQC(x) ((uint32_t)(((uint32_t)(x) << PORTx_PCRn_IRQC_SHIFT) & PORTx_PCRn_IRQC_MASK)) -#define PORTx_PCRn_MUX_SHIFT 8 /*!< Pin Mux Control (shift) */ -#define PORTx_PCRn_MUX_MASK ((uint32_t)0x00000700) /*!< Pin Mux Control (mask) */ -#define PORTx_PCRn_MUX(x) ((uint32_t)(((uint32_t)(x) << PORTx_PCRn_MUX_SHIFT) & PORTx_PCRn_MUX_MASK)) /*!< Pin Mux Control */ -#define PORTx_PCRn_DSE ((uint32_t)0x00000040) /*!< Drive Strength Enable */ -#define PORTx_PCRn_PFE ((uint32_t)0x00000010) /*!< Passive Filter Enable */ -#define PORTx_PCRn_SRE ((uint32_t)0x00000004) /*!< Slew Rate Enable */ -#define PORTx_PCRn_PE ((uint32_t)0x00000002) /*!< Pull Enable */ -#define PORTx_PCRn_PS ((uint32_t)0x00000001) /*!< Pull Select */ - -/****************************************************************/ -/* */ -/* Oscillator (OSC) */ -/* */ -/****************************************************************/ -/*********** Bits definition for OSC_CR register **************/ -#define OSC_CR_ERCLKEN ((uint8_t)0x80) /*!< External Reference Enable */ -#define OSC_CR_EREFSTEN ((uint8_t)0x20) /*!< External Reference Stop Enable */ -#define OSC_CR_SC2P ((uint8_t)0x08) /*!< Oscillator 2pF Capacitor Load Configure */ -#define OSC_CR_SC4P ((uint8_t)0x04) /*!< Oscillator 4pF Capacitor Load Configure */ -#define OSC_CR_SC8P ((uint8_t)0x02) /*!< Oscillator 8pF Capacitor Load Configure */ -#define OSC_CR_SC16P ((uint8_t)0x01) /*!< Oscillator 16pF Capacitor Load Configure */ - -/****************************************************************/ -/* */ -/* Direct Memory Access (DMA) */ -/* */ -/****************************************************************/ -/*********** Bits definition for DMA_BCRn register ************/ -#define DMA_DSR_BCRn_CE ((uint32_t)((uint32_t)1 << 30)) /*!< Configuration Error */ -#define DMA_DSR_BCRn_BES ((uint32_t)((uint32_t)1 << 29)) /*!< Bus Error on Source */ -#define DMA_DSR_BCRn_BED ((uint32_t)((uint32_t)1 << 28)) /*!< Bus Error on Destination */ -#define DMA_DSR_BCRn_REQ ((uint32_t)((uint32_t)1 << 26)) /*!< Request */ -#define DMA_DSR_BCRn_BSY ((uint32_t)((uint32_t)1 << 25)) /*!< Busy */ -#define DMA_DSR_BCRn_DONE ((uint32_t)((uint32_t)1 << 24)) /*!< Transactions done */ -#define DMA_DSR_BCRn_BCR_SHIFT 0 /*!< Bytes yet to be transferred for block (shift) */ -#define DMA_DSR_BCRn_BCR_MASK ((uint32_t)((uint32_t)0x00FFFFFF << DMA_DSR_BCRn_BCR_SHIFT)) /*!< Bytes yet to be transferred for block (mask) */ -#define DMA_DSR_BCRn_BCR(x) ((uint32_t)(((uint32_t)(x) << DMA_DSR_BCRn_BCR_SHIFT) & DMA_DSR_BCRn_BCR_MASK)) /*!< Bytes yet to be transferred for block */ - -/*********** Bits definition for DMA_DCRn register ************/ -#define DMA_DCRn_EINT ((uint32_t)((uint32_t)1 << 31)) /*!< Enable interrupt on completion of transfer */ -#define DMA_DCRn_ERQ ((uint32_t)((uint32_t)1 << 30)) /*!< Enable peripheral request */ -#define DMA_DCRn_CS ((uint32_t)((uint32_t)1 << 29)) /*!< Cycle steal */ -#define DMA_DCRn_AA ((uint32_t)((uint32_t)1 << 28)) /*!< Auto-align */ -#define DMA_DCRn_EADREQ ((uint32_t)((uint32_t)1 << 23)) /*!< Enable asynchronous DMA requests */ -#define DMA_DCRn_SINC ((uint32_t)((uint32_t)1 << 22)) /*!< Source increment */ -#define DMA_DCRn_SSIZE_SHIFT 20 /*!< Source size (shift) */ -#define DMA_DCRn_SSIZE_MASK ((uint32_t)((uint32_t)0x03 << DMA_DCRn_SSIZE_SHIFT)) /*!< Source size (mask) */ -#define DMA_DCRn_SSIZE(x) ((uint32_t)(((uint32_t)(x) << DMA_DCRn_SSIZE_SHIFT) & DMA_DCRn_SSIZE_MASK)) /*!< Source size */ -#define DMA_DCRn_DINC ((uint32_t)((uint32_t)1 << 19)) /*!< Destination increment */ -#define DMA_DCRn_DSIZE_SHIFT 17 /*!< Destination size (shift) */ -#define DMA_DCRn_DSIZE_MASK ((uint32_t)((uint32_t)0x03 << DMA_DCRn_DSIZE_SHIFT)) /*!< Destination size (mask) */ -#define DMA_DCRn_DSIZE(x) ((uint32_t)(((uint32_t)(x) << DMA_DCRn_DSIZE_SHIFT) & DMA_DCRn_DSIZE_MASK)) /*!< Destination size */ -#define DMA_DCRn_START ((uint32_t)((uint32_t)1 << 16)) /*!< Start transfer */ -#define DMA_DCRn_SMOD_SHIFT 12 /*!< Source address modulo (shift) */ -#define DMA_DCRn_SMOD_MASK ((uint32_t)((uint32_t)0x0F << DMA_DCRn_SMOD_SHIFT)) /*!< Source address modulo (mask) */ -#define DMA_DCRn_SMOD(x) ((uint32_t)(((uint32_t)(x) << DMA_DCRn_SMOD_SHIFT) & DMA_DCRn_SMOD_MASK)) /*!< Source address modulo */ -#define DMA_DCRn_DMOD_SHIFT 8 /*!< Destination address modulo (shift) */ -#define DMA_DCRn_DMOD_MASK ((uint32_t)0x0F << DMA_DCRn_DMOD_SHIFT) /*!< Destination address modulo (mask) */ -#define DMA_DCRn_DMOD(x) ((uint32_t)(((uint32_t)(x) << DMA_DCRn_DMOD_SHIFT) & DMA_DCRn_DMOD_MASK)) /*!< Destination address modulo */ -#define DMA_DCRn_D_REQ ((uint32_t)((uint32_t)1 << 7)) /*!< Disable request */ -#define DMA_DCRn_LINKCC_SHIFT 4 /*!< Link channel control (shift) */ -#define DMA_DCRn_LINKCC_MASK ((uint32_t)((uint32_t)0x03 << DMA_DCRn_LINKCC_SHIFT)) /*!< Link channel control (mask) */ -#define DMA_DCRn_LINKCC(x) ((uint32_t)(((uint32_t)(x) << DMA_DCRn_LINKCC_SHIFT) & DMA_DCRn_LINKCC_MASK)) /*!< Link channel control */ -#define DMA_DCRn_LCH1_SHIFT 2 /*!< Link channel 1 (shift) */ -#define DMA_DCRn_LCH1_MASK ((uint32_t)((uint32_t)0x03 << DMA_DCRn_LCH1_SHIFT)) /*!< Link channel 1 (mask) */ -#define DMA_DCRn_LCH1(x) ((uint32_t)(((uint32_t)(x) << DMA_DCRn_LCH1_SHIFT) & DMA_DCRn_LCH1_MASK)) /*!< Link channel 1 */ -#define DMA_DCRn_LCH2_SHIFT 0 /*!< Link channel 2 (shift) */ -#define DMA_DCRn_LCH2_MASK ((uint32_t)((uint32_t)0x03 << DMA_DCRn_LCH2_SHIFT)) /*!< Link channel 2 (mask) */ -#define DMA_DCRn_LCH2(x) ((uint32_t)(((uint32_t)(x) << DMA_DCRn_LCH2_SHIFT) & DMA_DCRn_LCH2_MASK)) /*!< Link channel 2 */ - -/****************************************************************/ -/* */ -/* Direct Memory Access Multiplexer (DMAMUX) */ -/* */ -/****************************************************************/ -/******** Bits definition for DMAMUX_CHCFGn register **********/ -#define DMAMUX_CHCFGn_ENBL ((uint8_t)((uint8_t)1 << 7)) /*!< DMA Channel Enable */ -#define DMAMUX_CHCFGn_TRIG ((uint8_t)((uint8_t)1 << 6)) /*!< DMA Channel Trigger Enable */ -#define DMAMUX_CHCFGn_SOURCE_SHIFT 0 /*!< DMA Channel Source (Slot) (shift) */ -#define DMAMUX_CHCFGn_SOURCE_MASK ((uint8_t)((uint8_t)0x3F << DMAMUX_CHCFGn_SOURCE_SHIFT)) /*!< DMA Channel Source (Slot) (mask) */ -#define DMAMUX_CHCFGn_SOURCE(x) ((uint8_t)(((uint8_t)(x) << DMAMUX_CHCFGn_SOURCE_SHIFT) & DMAMUX_CHCFGn_SOURCE_MASK)) /*!< DMA Channel Source (Slot) */ - -/****************************************************************/ -/* */ -/* Analog-to-Digital Converter (ADC) */ -/* */ -/****************************************************************/ -/*********** Bits definition for ADCx_SC1n register ***********/ -#define ADCx_SC1n_COCO ((uint32_t)((uint32_t)1 << 7)) /*!< Conversion Complete Flag */ -#define ADCx_SC1n_AIEN ((uint32_t)((uint32_t)1 << 6)) /*!< Interrupt Enable */ -#define ADCx_SC1n_DIFF ((uint32_t)((uint32_t)1 << 5)) /*!< Differential Mode Enable */ -#define ADCx_SC1n_ADCH_SHIFT 0 /*!< Input channel select (shift) */ -#define ADCx_SC1n_ADCH_MASK ((uint32_t)((uint32_t)0x1F << ADCx_SC1n_ADCH_SHIFT)) /*!< Input channel select (mask) */ -#define ADCx_SC1n_ADCH(x) ((uint32_t)(((uint32_t)(x) << ADCx_SC1n_ADCH_SHIFT) & ADCx_SC1n_ADCH_MASK)) /*!< Input channel select */ - -/*********** Bits definition for ADCx_CFG1 register ***********/ -#define ADCx_CFG1_ADLPC ((uint32_t)((uint32_t)1 << 7)) /*!< Low-Power Configuration */ -#define ADCx_CFG1_ADIV_SHIFT 5 /*!< Clock Divide Select (shift) */ -#define ADCx_CFG1_ADIV_MASK ((uint32_t)((uint32_t)0x03 << ADCx_CFG1_ADIV_SHIFT)) /*!< Clock Divide Select (mask) */ -#define ADCx_CFG1_ADIV(x) ((uint32_t)(((uint32_t)(x) << ADCx_CFG1_ADIV_SHIFT) & ADCx_CFG1_ADIV_MASK)) /*!< Clock Divide Select */ -#define ADCx_CFG1_ADLSMP ((uint32_t)((uint32_t)1 << 4)) /*!< Sample time configuration */ -#define ADCx_CFG1_MODE_SHIFT 2 /*!< Conversion mode (resolution) selection (shift) */ -#define ADCx_CFG1_MODE_MASK ((uint32_t)((uint32_t)0x03 << ADCx_CFG1_MODE_SHIFT)) /*!< Conversion mode (resolution) selection (mask) */ -#define ADCx_CFG1_MODE(x) ((uint32_t)(((uint32_t)(x) << ADCx_CFG1_MODE_SHIFT) & ADCx_CFG1_MODE_MASK)) /*!< Conversion mode (resolution) selection */ -#define ADCx_CFG1_ADICLK_SHIFT 0 /*!< Input Clock Select (shift) */ -#define ADCx_CFG1_ADICLK_MASK ((uint32_t)((uint32_t)0x03 << ADCx_CFG1_ADICLK_SHIFT)) /*!< Input Clock Select (mask) */ -#define ADCx_CFG1_ADICLK(x) ((uint32_t)(((uint32_t)(x) << ADCx_CFG1_ADICLK_SHIFT) & ADCx_CFG1_ADICLK_MASK)) /*!< Input Clock Select */ - -/*********** Bits definition for ADCx_CFG2 register ***********/ -#define ADCx_CFG2_MUXSEL ((uint32_t)((uint32_t)1 << 4)) /*!< ADC Mux Select */ -#define ADCx_CFG2_ADACKEN ((uint32_t)((uint32_t)1 << 3)) /*!< Asynchronous Clock Output Enable */ -#define ADCx_CFG2_ADHSC ((uint32_t)((uint32_t)1 << 2)) /*!< High-Speed Configuration */ -#define ADCx_CFG2_ADLSTS_SHIFT 0 /*!< Long Sample Time Select (shift) */ -#define ADCx_CFG2_ADLSTS_MASK ((uint32_t)((uint32_t)0x03 << ADCx_CFG2_ADLSTS_SHIFT)) /*!< Long Sample Time Select (mask) */ -#define ADCx_CFG2_ADLSTS(x) ((uint32_t)(((uint32_t)(x) << ADCx_CFG2_ADLSTS_SHIFT) & ADCx_CFG2_ADLSTS_MASK)) /*!< Long Sample Time Select */ - -/*********** Bits definition for ADCx_SC2 register ***********/ -#define ADCx_SC2_ADACT ((uint32_t)((uint32_t)1 << 7)) /*!< Conversion Active */ -#define ADCx_SC2_ADTRG ((uint32_t)((uint32_t)1 << 6)) /*!< Conversion Trigger Select */ -#define ADCx_SC2_ACFE ((uint32_t)((uint32_t)1 << 5)) /*!< Compare Function Enable */ -#define ADCx_SC2_ACFGT ((uint32_t)((uint32_t)1 << 4)) /*!< Compare Function Greater Than Enable */ -#define ADCx_SC2_ACREN ((uint32_t)((uint32_t)1 << 3)) /*!< Compare Function Range Enable */ -#define ADCx_SC2_DMAEN ((uint32_t)((uint32_t)1 << 2)) /*!< DMA Enable */ -#define ADCx_SC2_REFSEL_SHIFT 0 /*!< Voltage Reference Selection (shift) */ -#define ADCx_SC2_REFSEL_MASK ((uint32_t)((uint32_t)0x03 << ADCx_SC2_REFSEL_SHIFT)) /*!< Voltage Reference Selection (mask) */ -#define ADCx_SC2_REFSEL(x) ((uint32_t)(((uint32_t)(x) << ADCx_SC2_REFSEL_SHIFT) & ADCx_SC2_REFSEL_MASK)) /*!< Voltage Reference Selection */ - -/*********** Bits definition for ADCx_SC3 register ***********/ -#define ADCx_SC3_CAL ((uint32_t)((uint32_t)1 << 7)) /*!< Calibration */ -#define ADCx_SC3_CALF ((uint32_t)((uint32_t)1 << 6)) /*!< Calibration Failed Flag */ -#define ADCx_SC3_ADCO ((uint32_t)((uint32_t)1 << 3)) /*!< Continuous Conversion Enable */ -#define ADCx_SC3_AVGE ((uint32_t)((uint32_t)1 << 2)) /*!< Hardware Average Enable */ -#define ADCx_SC3_AVGS_SHIFT 0 /*!< Hardware Average Select (shift) */ -#define ADCx_SC3_AVGS_MASK ((uint32_t)((uint32_t)0x03 << ADCx_SC3_AVGS_SHIFT)) /*!< Hardware Average Select (mask) */ -#define ADCx_SC3_AVGS(x) ((uint32_t)(((uint32_t)(x) << ADCx_SC3_AVGS_SHIFT) & ADCx_SC3_AVGS_MASK)) /*!< Hardware Average Select */ - -/****************************************************************/ -/* */ -/* Low-Power Timer (LPTMR) */ -/* */ -/****************************************************************/ -/********** Bits definition for LPTMRx_CSR register ***********/ -#define LPTMRx_CSR_TCF ((uint32_t)((uint32_t)1 << 7)) /*!< Timer Compare Flag */ -#define LPTMRx_CSR_TIE ((uint32_t)((uint32_t)1 << 6)) /*!< Timer Interrupt Enable */ -#define LPTMRx_CSR_TPS_SHIFT 4 /*!< Timer Pin Select (shift) */ -#define LPTMRx_CSR_TPS_MASK ((uint32_t)((uint32_t)0x03 << LPTMRx_CSR_TPS_SHIFT)) /*!< Timer Pin Select (mask) */ -#define LPTMRx_CSR_TPS(x) ((uint32_t)(((uint32_t)(x) << LPTMRx_CSR_TPS_SHIFT) & LPTMRx_CSR_TPS_MASK)) /*!< Timer Pin Select */ -#define LPTMRx_CSR_TPP ((uint32_t)((uint32_t)1 << 3)) /*!< Timer Pin Polarity */ -#define LPTMRx_CSR_TFC ((uint32_t)((uint32_t)1 << 2)) /*!< Timer Free-Running Counter */ -#define LPTMRx_CSR_TMS ((uint32_t)((uint32_t)1 << 1)) /*!< Timer Mode Select */ -#define LPTMRx_CSR_TEN ((uint32_t)((uint32_t)1 << 0)) /*!< Timer Enable */ - -/********** Bits definition for LPTMRx_PSR register ***********/ -#define LPTMRx_PSR_PRESCALE_SHIFT 3 /*!< Prescale Value (shift) */ -#define LPTMRx_PSR_PRESCALE_MASK ((uint32_t)((uint32_t)0x0F << LPTMRx_PSR_PRESCALE_SHIFT)) /*!< Prescale Value (mask) */ -#define LPTMRx_PSR_PRESCALE(x) ((uint32_t)(((uint32_t)(x) << LPTMRx_PSR_PRESCALE_SHIFT) & LPTMRx_PSR_PRESCALE_MASK)) /*!< Prescale Value */ -#define LPTMRx_PSR_PBYP ((uint32_t)((uint32_t)1 << 2)) /*!< Prescaler Bypass */ -#define LPTMRx_PSR_PCS_SHIFT 0 /*!< Prescaler Clock Select (shift) */ -#define LPTMRx_PSR_PCS_MASK ((uint32_t)((uint32_t)0x03 << LPTMRx_PSR_PCS_SHIFT)) /*!< Prescaler Clock Select (mask) */ -#define LPTMRx_PSR_PCS(x) ((uint32_t)(((uint32_t)(x) << LPTMRx_PSR_PCS_SHIFT) & LPTMRx_PSR_PCS_MASK)) /*!< Prescaler Clock Select */ - -/********** Bits definition for LPTMRx_CMR register ***********/ -#define LPTMRx_CMR_COMPARE_SHIFT 0 /*!< Compare Value (shift) */ -#define LPTMRx_CMR_COMPARE_MASK ((uint32_t)((uint32_t)0xFFFF << LPTMRx_CMR_COMPARE_SHIFT)) /*!< Compare Value (mask) */ -#define LPTMRx_CMR_COMPARE(x) ((uint32_t)(((uint32_t)(x) << LPTMRx_CMR_COMPARE_SHIFT) & LPTMRx_CMR_COMPARE_MASK)) /*!< Compare Value */ - -/********** Bits definition for LPTMRx_CNR register ***********/ -#define LPTMRx_CNR_COUNTER_SHIFT 0 /*!< Counter Value (shift) */ -#define LPTMRx_CNR_COUNTER_MASK ((uint32_t)((uint32_t)0xFFFF << LPTMRx_CNR_COUNTER_SHIFT)) /*!< Counter Value (mask) */ -#define LPTMRx_CNR_COUNTER(x) ((uint32_t)(((uint32_t)(x) << LPTMRx_CNR_COUNTER_SHIFT) & LPTMRx_CNR_COUNTER_MASK)) /*!< Counter Value */ - -/****************************************************************/ -/* */ -/* Touch Sensing Input (TSI) */ -/* */ -/****************************************************************/ -/********** Bits definition for TSIx_GENCS register ***********/ -#define TSIx_GENCS_OUTRGF ((uint32_t)((uint32_t)1 << 31)) /*!< Out of Range Flag */ -#define TSIx_GENCS_ESOR ((uint32_t)((uint32_t)1 << 28)) /*!< End-of-scan/Out-of-Range Interrupt Selection */ -#define TSIx_GENCS_MODE_SHIFT 24 /*!< TSI analog modes setup and status bits (shift) */ -#define TSIx_GENCS_MODE_MASK ((uint32_t)((uint32_t)0x0F << TSIx_GENCS_MODE_SHIFT)) /*!< TSI analog modes setup and status bits (mask) */ -#define TSIx_GENCS_MODE(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_MODE_SHIFT) & TSIx_GENCS_MODE_MASK)) /*!< TSI analog modes setup and status bits */ -#define TSIx_GENCS_REFCHRG_SHIFT 21 /*!< Reference oscillator charge/discharge current (shift) */ -#define TSIx_GENCS_REFCHRG_MASK ((uint32_t)((uint32_t)0x07 << TSIx_GENCS_REFCHRG_SHIFT)) /*!< Reference oscillator charge/discharge current (mask) */ -#define TSIx_GENCS_REFCHRG(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_REFCHRG_SHIFT) & TSIx_GENCS_REFCHRG_MASK)) /*!< Reference oscillator charge/discharge current */ -#define TSIx_GENCS_DVOLT_SHIFT 19 /*!< Oscillator voltage rails (shift) */ -#define TSIx_GENCS_DVOLT_MASK ((uint32_t)((uint32_t)0x03 << TSIx_GENCS_DVOLT_SHIFT)) /*!< Oscillator voltage rails (mask) */ -#define TSIx_GENCS_DVOLT(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_DVOLT_SHIFT) & TSIx_GENCS_DVOLT_MASK)) /*!< Oscillator voltage rails */ -#define TSIx_GENCS_EXTCHRG_SHIFT 16 /*!< Electrode oscillator charge/discharge current (shift) */ -#define TSIx_GENCS_EXTCHRG_MASK ((uint32_t)((uint32_t)0x07 << TSIx_GENCS_EXTCHRG_SHIFT)) /*!< Electrode oscillator charge/discharge current (mask) */ -#define TSIx_GENCS_EXTCHRG(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_EXTCHRG_SHIFT) & TSIx_GENCS_EXTCHRG_MASK)) /*!< Electrode oscillator charge/discharge current */ -#define TSIx_GENCS_PS_SHIFT 13 /*!< Electrode oscillator prescaler (shift) */ -#define TSIx_GENCS_PS_MASK ((uint32_t)((uint32_t)0x07 << TSIx_GENCS_PS_SHIFT)) /*!< Electrode oscillator prescaler (mask) */ -#define TSIx_GENCS_PS(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_PS_SHIFT) & TSIx_GENCS_PS_MASK)) /*!< Electrode oscillator prescaler */ -#define TSIx_GENCS_NSCN_SHIFT 8 /*!< Number of scans per electrode minus 1 (shift) */ -#define TSIx_GENCS_NSCN_MASK ((uint32_t)((uint32_t)0x1F << TSIx_GENCS_NSCN_SHIFT)) /*!< Number of scans per electrode minus 1 (mask) */ -#define TSIx_GENCS_NSCN(x) ((uint32_t)(((uint32_t)(x) << TSIx_GENCS_NSCN_SHIFT) & TSIx_GENCS_NSCN_MASK)) /*!< Number of scans per electrode minus 1 */ -#define TSIx_GENCS_TSIEN ((uint32_t)((uint32_t)1 << 7)) /*!< TSI Module Enable */ -#define TSIx_GENCS_TSIIEN ((uint32_t)((uint32_t)1 << 6)) /*!< TSI Interrupt Enable */ -#define TSIx_GENCS_STPE ((uint32_t)((uint32_t)1 << 5)) /*!< TSI STOP Enable */ -#define TSIx_GENCS_STM ((uint32_t)((uint32_t)1 << 4)) /*!< Scan Trigger Mode (0=software; 1=hardware) */ -#define TSIx_GENCS_SCNIP ((uint32_t)((uint32_t)1 << 3)) /*!< Scan in Progress Status */ -#define TSIx_GENCS_EOSF ((uint32_t)((uint32_t)1 << 2)) /*!< End of Scan Flag */ -#define TSIx_GENCS_CURSW ((uint32_t)((uint32_t)1 << 1)) /*!< Swap electrode and reference current sources */ - -/********** Bits definition for TSIx_DATA register ************/ -#define TSIx_DATA_TSICH_SHIFT 28 /*!< Specify channel to be measured (shift) */ -#define TSIx_DATA_TSICH_MASK ((uint32_t)((uint32_t)0x0F << TSIx_DATA_TSICH_SHIFT)) /*!< Specify channel to be measured (mask) */ -#define TSIx_DATA_TSICH(x) ((uint32_t)(((uint32_t)(x) << TSIx_DATA_TSICH_SHIFT) & TSIx_DATA_TSICH_MASK)) /*!< Specify channel to be measured */ -#define TSIx_DATA_DMAEN ((uint32_t)((uint32_t)1 << 23)) /*!< DMA Transfer Enabled */ -#define TSIx_DATA_SWTS ((uint32_t)((uint32_t)1 << 22)) /*!< Software Trigger Start */ -#define TSIx_DATA_TSICNT_SHIFT 0 /*!< TSI Conversion Counter Value (shift) */ -#define TSIx_DATA_TSICNT_MASK ((uint32_t)((uint32_t)0xFFFF << TSIx_DATA_TSICNT_SHIFT)) /*!< TSI Conversion Counter Value (mask) */ -#define TSIx_DATA_TSICNT(x) ((uint32_t)(((uint32_t)(x) << TSIx_DATA_TSICNT_SHIFT) & TSIx_DATA_TSICNT_MASK)) /*!< TSI Conversion Counter Value */ - -/********** Bits definition for TSIx_TSHD register ************/ -#define TSIx_TSHD_THRESH_SHIFT 16 /*!< TSI Wakeup Channel High-Threshold (shift) */ -#define TSIx_TSHD_THRESH_MASK ((uint32_t)((uint32_t)0xFFFF << TSIx_TSHD_THRESH_SHIFT)) /*!< TSI Wakeup Channel High-Threshold (mask) */ -#define TSIx_TSHD_THRESH(x) ((uint32_t)(((uint32_t)(x) << TSIx_TSHD_THRESH_SHIFT) & TSIx_TSHD_THRESH_MASK)) /*!< TSI Wakeup Channel High-Threshold */ -#define TSIx_TSHD_THRESL_SHIFT 0 /*!< TSI Wakeup Channel Low-Threshold (shift) */ -#define TSIx_TSHD_THRESL_MASK ((uint32_t)((uint32_t)0xFFFF << TSIx_TSHD_THRESL_SHIFT)) /*!< TSI Wakeup Channel Low-Threshold (mask) */ -#define TSIx_TSHD_THRESL(x) ((uint32_t)(((uint32_t)(x) << TSIx_TSHD_THRESL_SHIFT) & TSIx_TSHD_THRESL_MASK)) /*!< TSI Wakeup Channel Low-Threshold */ - -/****************************************************************/ -/* */ -/* Multipurpose Clock Generator (MCG) */ -/* */ -/****************************************************************/ -/*********** Bits definition for MCG_C1 register **************/ -#define MCG_C1_CLKS_SHIFT 6 /*!< Clock source select (shift) */ -#define MCG_C1_CLKS_MASK ((uint8_t)((uint8_t)0x03 << MCG_C1_CLKS_SHIFT)) /*!< Clock source select (mask) */ -#define MCG_C1_CLKS(x) ((uint8_t)(((uint8_t)(x) << MCG_C1_CLKS_SHIFT) & MCG_C1_CLKS_MASK)) /*!< Clock source select */ -#define MCG_C1_CLKS_FLLPLL MCG_C1_CLKS(0) /*!< Select output of FLL or PLL, depending on PLLS control bit */ -#define MCG_C1_CLKS_IRCLK MCG_C1_CLKS(1) /*!< Select internal reference clock */ -#define MCG_C1_CLKS_ERCLK MCG_C1_CLKS(2) /*!< Select external reference clock */ -#define MCG_C1_FRDIV_SHIFT 3 /*!< FLL External Reference Divider (shift) */ -#define MCG_C1_FRDIV_MASK ((uint8_t)((uint8_t)0x07 << MCG_C1_FRDIV_SHIFT)) /*!< FLL External Reference Divider (mask) */ -#define MCG_C1_FRDIV(x) ((uint8_t)(((uint8_t)(x) << MCG_C1_FRDIV_SHIFT) & MCG_C1_FRDIV_MASK)) /*!< FLL External Reference Divider */ -#define MCG_C1_IREFS ((uint8_t)((uint8_t)1 << 2)) /*!< Internal Reference Select (0=ERCLK; 1=slow IRCLK) */ -#define MCG_C1_IRCLKEN ((uint8_t)((uint8_t)1 << 1)) /*!< Internal Reference Clock Enable */ -#define MCG_C1_IREFSTEN ((uint8_t)((uint8_t)1 << 0)) /*!< Internal Reference Stop Enable */ - -/*********** Bits definition for MCG_C2 register **************/ -#define MCG_C2_LOCRE0 ((uint8_t)((uint8_t)1 << 7)) /*!< Loss of Clock Reset Enable */ -#define MCG_C2_RANGE0_SHIFT 4 /*!< Frequency Range Select (shift) */ -#define MCG_C2_RANGE0_MASK ((uint8_t)((uint8_t)0x03 << MCG_C2_RANGE0_SHIFT)) /*!< Frequency Range Select (mask) */ -#define MCG_C2_RANGE0(x) ((uint8_t)(((uint8_t)(x) << MCG_C2_RANGE0_SHIFT) & MCG_C2_RANGE0_MASK)) /*!< Frequency Range Select */ -#define MCG_C2_HGO0 ((uint8_t)((uint8_t)1 << 3)) /*!< High Gain Oscillator Select (0=low power; 1=high gain) */ -#define MCG_C2_EREFS0 ((uint8_t)((uint8_t)1 << 2)) /*!< External Reference Select (0=clock; 1=oscillator) */ -#define MCG_C2_LP ((uint8_t)((uint8_t)1 << 1)) /*!< Low Power Select (1=FLL/PLL disabled in bypass modes) */ -#define MCG_C2_IRCS ((uint8_t)((uint8_t)1 << 0)) /*!< Internal Reference Clock Select (0=slow; 1=fast) */ - -/*********** Bits definition for MCG_C3 register **************/ -#define MCG_C3_SCTRIM_SHIFT 0 /*!< Slow Internal Reference Clock Trim Setting (shift) */ -#define MCG_C3_SCTRIM_MASK ((uint8_t)((uint8_t)0xFF << MCG_C3_SCTRIM_SHIFT)) /*!< Slow Internal Reference Clock Trim Setting (mask) */ -#define MCG_C3_SCTRIM(x) ((uint8_t)(((uint8_t)(x) << MCG_C3_SCTRIM_SHIFT) & MCG_C3_SCTRIM_MASK)) /*!< Slow Internal Reference Clock Trim Setting */ - -/*********** Bits definition for MCG_C4 register **************/ -#define MCG_C4_DMX32 ((uint8_t)((uint8_t)1 << 7)) /*!< DCO Maximum Frequency with 32.768 kHz Reference */ -#define MCG_C4_DRST_DRS_SHIFT 5 /*!< DCO Range Select (shift) */ -#define MCG_C4_DRST_DRS_MASK ((uint8_t)((uint8_t)0x03 << MCG_C4_DRST_DRS_SHIFT)) /*!< DCO Range Select (mask) */ -#define MCG_C4_DRST_DRS(x) ((uint8_t)(((uint8_t)(x) << MCG_C4_DRST_DRS_SHIFT) & MCG_C4_DRST_DRS_MASK)) /*!< DCO Range Select */ -#define MCG_C4_FCTRIM_SHIFT 1 /*!< Fast Internal Reference Clock Trim Setting (shift) */ -#define MCG_C4_FCTRIM_MASK ((uint8_t)((uint8_t)0x0F << MCG_C4_FCTRIM_SHIFT)) /*!< Fast Internal Reference Clock Trim Setting (mask) */ -#define MCG_C4_FCTRIM(x) ((uint8_t)(((uint8_t)(x) << MCG_C4_FCTRIM_SHIFT) & MCG_C4_FCTRIM_MASK)) /*!< Fast Internal Reference Clock Trim Setting */ -#define MCG_C4_SCFTRIM ((uint8_t)((uint8_t)1 << 0)) /*!< Slow Internal Reference Clock Fine Trim */ - -/*********** Bits definition for MCG_C5 register **************/ -#define MCG_C5_PLLCLKEN0 ((uint8_t)((uint8_t)1 << 6)) /*!< PLL Clock Enable */ -#define MCG_C5_PLLSTEN0 ((uint8_t)((uint8_t)1 << 5)) /*!< PLL Stop Enable */ -#define MCG_C5_PRDIV0_SHIFT 0 /*!< PLL External Reference Divider (shift) */ -#define MCG_C5_PRDIV0_MASK ((uint8_t)((uint8_t)0x1F << MCG_C5_PRDIV0_SHIFT)) /*!< PLL External Reference Divider (mask) */ -#define MCG_C5_PRDIV0(x) ((uint8_t)(((uint8_t)(x) << MCG_C5_PRDIV0_SHIFT) & MCG_C5_PRDIV0_MASK)) /*!< PLL External Reference Divider */ - -/*********** Bits definition for MCG_C6 register **************/ -#define MCG_C6_LOLIE0 ((uint8_t)((uint8_t)1 << 7)) /*!< Loss of Lock Interrupt Enable */ -#define MCG_C6_PLLS ((uint8_t)((uint8_t)1 << 6)) /*!< PLL Select */ -#define MCG_C6_CME0 ((uint8_t)((uint8_t)1 << 5)) /*!< Clock Monitor Enable */ -#define MCG_C6_VDIV0_SHIFT 0 /*!< VCO 0 Divider (shift) */ -#define MCG_C6_VDIV0_MASK ((uint8_t)((uint8_t)0x1F << MCG_C6_VDIV0_SHIFT)) /*!< VCO 0 Divider (mask) */ -#define MCG_C6_VDIV0(x) ((uint8_t)(((uint8_t)(x) << MCG_C6_VDIV0_SHIFT) & MCG_C6_VDIV0_MASK)) /*!< VCO 0 Divider */ - -/************ Bits definition for MCG_S register **************/ -#define MCG_S_LOLS ((uint8_t)((uint8_t)1 << 7)) /*!< Loss of Lock Status */ -#define MCG_S_LOCK0 ((uint8_t)((uint8_t)1 << 6)) /*!< Lock Status */ -#define MCG_S_PLLST ((uint8_t)((uint8_t)1 << 5)) /*!< PLL Select Status */ -#define MCG_S_IREFST ((uint8_t)((uint8_t)1 << 4)) /*!< Internal Reference Status */ -#define MCG_S_CLKST_SHIFT 2 /*!< Clock Mode Status (shift) */ -#define MCG_S_CLKST_MASK ((uint8_t)((uint8_t)0x03 << MCG_S_CLKST_SHIFT)) /*!< Clock Mode Status (mask) */ -#define MCG_S_CLKST(x) ((uint8_t)(((uint8_t)(x) << MCG_S_CLKST_SHIFT) & MCG_S_CLKST_MASK)) /*!< Clock Mode Status */ -#define MCG_S_CLKST_FLL MCG_S_CLKST(0) /*!< Output of the FLL is selected */ -#define MCG_S_CLKST_IRCLK MCG_S_CLKST(1) /*!< Internal reference clock is selected */ -#define MCG_S_CLKST_ERCLK MCG_S_CLKST(2) /*!< External reference clock is selected */ -#define MCG_S_CLKST_PLL MCG_S_CLKST(3) /*!< Output of the PLL is selected */ -#define MCG_S_OSCINIT0 ((uint8_t)((uint8_t)1 << 1)) /*!< OSC Initialization */ -#define MCG_S_IRCST ((uint8_t)((uint8_t)1 << 0)) /*!< Internal Reference Clock Status */ - -/************ Bits definition for MCG_SC register **************/ -#define MCG_SC_ATME ((uint8_t)((uint8_t)1 << 7)) /*!< Automatic Trim Machine Enable */ -#define MCG_SC_ATMS ((uint8_t)((uint8_t)1 << 6)) /*!< Automatic Trim Machine Select */ -#define MCG_SC_ATMF ((uint8_t)((uint8_t)1 << 5)) /*!< Automatic Trim Machine Fail Flag */ -#define MCG_SC_FLTPRSRV ((uint8_t)((uint8_t)1 << 4) /*!< FLL Filter Preserve Enable */ -#define MCG_SC_FCRDIV_SHIFT 1 /*!< Fast Clock Internal Reference Divider (shift) */ -#define MCG_SC_FCRDIV_MASK ((uint8_t)((uint8_t)0x07 << MCG_SC_FCRDIV_SHIFT)) /*!< Fast Clock Internal Reference Divider (mask) */ -#define MCG_SC_FCRDIV(x) ((uint8_t)(((uint8_t)(x) << MCG_SC_FCRDIV_SHIFT) & MCG_SC_FCRDIV_MASK)) /*!< Fast Clock Internal Reference Divider */ -#define MCG_SC_FCRDIV_DIV1 MCG_SC_FCRDIV(0) /*!< Divide Factor is 1 */ -#define MCG_SC_FCRDIV_DIV2 MCG_SC_FCRDIV(1) /*!< Divide Factor is 2 */ -#define MCG_SC_FCRDIV_DIV4 MCG_SC_FCRDIV(2) /*!< Divide Factor is 4 */ -#define MCG_SC_FCRDIV_DIV8 MCG_SC_FCRDIV(3) /*!< Divide Factor is 8 */ -#define MCG_SC_FCRDIV_DIV16 MCG_SC_FCRDIV(4) /*!< Divide Factor is 16 */ -#define MCG_SC_FCRDIV_DIV32 MCG_SC_FCRDIV(5) /*!< Divide Factor is 32 */ -#define MCG_SC_FCRDIV_DIV64 MCG_SC_FCRDIV(6) /*!< Divide Factor is 64 */ -#define MCG_SC_FCRDIV_DIV128 MCG_SC_FCRDIV(7) /*!< Divide Factor is 128 */ -#define MCG_SC_LOCS0 ((uint8_t)((uint8_t)1 << 0) /*!< OSC0 Loss of Clock Status */ - -/*********** Bits definition for MCG_ATCVH register ************/ -#define MCG_ATCVH_ATCVH_SHIFT 0 /*!< MCG Auto Trim Compare Value High Register (shift) */ -#define MCG_ATCVH_ATCVH_MASK ((uint8_t)((uint8_t)0xFF << MCG_ATCVH_ATCVH_SHIFT)) /*!< MCG Auto Trim Compare Value High Register (mask) */ -#define MCG_ATCVH_ATCVH(x) ((uint8_t)(((uint8_t)(x) << MCG_ATCVH_ATCVH_SHIFT) & MCG_ATCVH_ATCVH_MASK)) /*!< MCG Auto Trim Compare Value High Register */ - -/*********** Bits definition for MCG_ATCVL register ************/ -#define MCG_ATCVL_ATCVL_SHIFT 0 /*!< MCG Auto Trim Compare Value Low Register (shift) */ -#define MCG_ATCVL_ATCVL_MASK ((uint8_t)((uint8_t)0xFF << MCG_ATCVL_ATCVL_SHIFT)) /*!< MCG Auto Trim Compare Value Low Register (mask) */ -#define MCG_ATCVL_ATCVL(x) ((uint8_t)(((uint8_t)(x) << MCG_ATCVL_ATCVL_SHIFT) & MCG_ATCVL_ATCVL_MASK)) /*!< MCG Auto Trim Compare Value Low Register */ - -/************ Bits definition for MCG_C7 register **************/ -/* All MCG_C7 bits are reserved on the KL25Z. */ - -/************ Bits definition for MCG_C8 register **************/ -#define MCG_C8_LOLRE ((uint8_t)((uint8_t)1 << 6)) /*!< PLL Loss of Lock Reset Enable */ - -/************ Bits definition for MCG_C9 register **************/ -/* All MCG_C9 bits are reserved on the KL25Z. */ - -/************ Bits definition for MCG_C10 register *************/ -/* All MCG_C10 bits are reserved on the KL25Z. */ - - -/****************************************************************/ -/* */ -/* Serial Peripheral Interface (SPI) */ -/* */ -/****************************************************************/ -/*********** Bits definition for SPIx_C1 register *************/ -#define SPIx_C1_SPIE ((uint8_t)0x80) /*!< SPI Interrupt Enable */ -#define SPIx_C1_SPE ((uint8_t)0x40) /*!< SPI System Enable */ -#define SPIx_C1_SPTIE ((uint8_t)0x20) /*!< SPI Transmit Interrupt Enable */ -#define SPIx_C1_MSTR ((uint8_t)0x10) /*!< Master/Slave Mode Select */ -#define SPIx_C1_CPOL ((uint8_t)0x08) /*!< Clock Polarity */ -#define SPIx_C1_CPHA ((uint8_t)0x04) /*!< Clock Phase */ -#define SPIx_C1_SSOE ((uint8_t)0x02) /*!< Slave Select Output Enable */ -#define SPIx_C1_LSBFE ((uint8_t)0x01) /*!< LSB First */ - -/*********** Bits definition for SPIx_C2 register *************/ -#define SPIx_C2_SPMIE ((uint8_t)0x80) /*!< SPI Match Interrupt Enable */ -#define SPIx_C2_TXDMAE ((uint8_t)0x20) /*!< Transmit DMA Enable */ -#define SPIx_C2_MODFEN ((uint8_t)0x10) /*!< Master Mode-Fault Function Enable */ -#define SPIx_C2_BIDIROE ((uint8_t)0x08) /*!< Bidirectional Mode Output Enable */ -#define SPIx_C2_RXDMAE ((uint8_t)0x04) /*!< Receive DMA Enable */ -#define SPIx_C2_SPISWAI ((uint8_t)0x02) /*!< SPI Stop in Wait Mode */ -#define SPIx_C2_SPC0 ((uint8_t)0x01) /*!< SPI Pin Control 0 */ - -/*********** Bits definition for SPIx_BR register *************/ -#define SPIx_BR_SPPR ((uint8_t)0x70) /*!< SPI Baud rate Prescaler Divisor */ -#define SPIx_BR_SPR ((uint8_t)0x0F) /*!< SPI Baud rate Divisor */ - -#define SPIx_BR_SPPR_SHIFT 4 - -/*********** Bits definition for SPIx_S register **************/ -#define SPIx_S_SPRF ((uint8_t)0x80) /*!< SPI Read Buffer Full Flag */ -#define SPIx_S_SPMF ((uint8_t)0x40) /*!< SPI Match Flag */ -#define SPIx_S_SPTEF ((uint8_t)0x20) /*!< SPI Transmit Buffer Empty Flag */ -#define SPIx_S_MODF ((uint8_t)0x10) /*!< Master Mode Fault Flag */ - -/*********** Bits definition for SPIx_D register **************/ -#define SPIx_D_DATA ((uint8_t)0xFF) /*!< Data */ - -/*********** Bits definition for SPIx_M register **************/ -#define SPIx_M_DATA ((uint8_t)0xFF) /*!< SPI HW Compare value for Match */ - -/****************************************************************/ -/* */ -/* Inter-Integrated Circuit (I2C) */ -/* */ -/****************************************************************/ -/*********** Bits definition for I2Cx_A1 register *************/ -#define I2Cx_A1_AD ((uint8_t)0xFE) /*!< Address [7:1] */ - -#define I2Cx_A1_AD_SHIT 1 - -/*********** Bits definition for I2Cx_F register **************/ -#define I2Cx_F_MULT ((uint8_t)0xC0) /*!< Multiplier factor */ -#define I2Cx_F_ICR ((uint8_t)0x3F) /*!< Clock rate */ - -#define I2Cx_F_MULT_SHIFT 5 - -/*********** Bits definition for I2Cx_C1 register *************/ -#define I2Cx_C1_IICEN ((uint8_t)0x80) /*!< I2C Enable */ -#define I2Cx_C1_IICIE ((uint8_t)0x40) /*!< I2C Interrupt Enable */ -#define I2Cx_C1_MST ((uint8_t)0x20) /*!< Master Mode Select */ -#define I2Cx_C1_TX ((uint8_t)0x10) /*!< Transmit Mode Select */ -#define I2Cx_C1_TXAK ((uint8_t)0x08) /*!< Transmit Acknowledge Enable */ -#define I2Cx_C1_RSTA ((uint8_t)0x04) /*!< Repeat START */ -#define I2Cx_C1_WUEN ((uint8_t)0x02) /*!< Wakeup Enable */ -#define I2Cx_C1_DMAEN ((uint8_t)0x01) /*!< DMA Enable */ - -/*********** Bits definition for I2Cx_S register **************/ -#define I2Cx_S_TCF ((uint8_t)0x80) /*!< Transfer Complete Flag */ -#define I2Cx_S_IAAS ((uint8_t)0x40) /*!< Addressed As A Slave */ -#define I2Cx_S_BUSY ((uint8_t)0x20) /*!< Bus Busy */ -#define I2Cx_S_ARBL ((uint8_t)0x10) /*!< Arbitration Lost */ -#define I2Cx_S_RAM ((uint8_t)0x08) /*!< Range Address Match */ -#define I2Cx_S_SRW ((uint8_t)0x04) /*!< Slave Read/Write */ -#define I2Cx_S_IICIF ((uint8_t)0x02) /*!< Interrupt Flag */ -#define I2Cx_S_RXAK ((uint8_t)0x01) /*!< Receive Acknowledge */ - -/*********** Bits definition for I2Cx_D register **************/ -#define I2Cx_D_DATA ((uint8_t)0xFF) /*!< Data */ - -/*********** Bits definition for I2Cx_C2 register *************/ -#define I2Cx_C2_GCAEN ((uint8_t)0x80) /*!< General Call Address Enable */ -#define I2Cx_C2_ADEXT ((uint8_t)0x40) /*!< Address Extension */ -#define I2Cx_C2_HDRS ((uint8_t)0x20) /*!< High Drive Select */ -#define I2Cx_C2_SBRC ((uint8_t)0x10) /*!< Slave Baud Rate Control */ -#define I2Cx_C2_RMEN ((uint8_t)0x08) /*!< Range Address Matching Enable */ -#define I2Cx_C2_AD_10_8 ((uint8_t)0x03) /*!< Slave Address [10:8] */ - -/*********** Bits definition for I2Cx_FLT register ************/ -#define I2Cx_FLT_SHEN ((uint8_t)0x80) /*!< Stop Hold Enable */ -#define I2Cx_FLT_STOPF ((uint8_t)0x40) /*!< I2C Bus Stop Detect Flag */ -#define I2Cx_FLT_STOPIE ((uint8_t)0x20) /*!< I2C Bus Stop Interrupt Enable */ -#define I2Cx_FLT_FLT ((uint8_t)0x1F) /*!< I2C Programmable Filter Factor */ - -/*********** Bits definition for I2Cx_RA register *************/ -#define I2Cx_RA_RAD ((uint8_t)0xFE) /*!< Range Slave Address */ - -#define I2Cx_RA_RAD_SHIFT 1 - -/*********** Bits definition for I2Cx_SMB register ************/ -#define I2Cx_SMB_FACK ((uint8_t)0x80) /*!< Fast NACK/ACK Enable */ -#define I2Cx_SMB_ALERTEN ((uint8_t)0x40) /*!< SMBus Alert Response Address Enable */ -#define I2Cx_SMB_SIICAEN ((uint8_t)0x20) /*!< Second I2C Address Enable */ -#define I2Cx_SMB_TCKSEL ((uint8_t)0x10) /*!< Timeout Counter Clock Select */ -#define I2Cx_SMB_SLTF ((uint8_t)0x08) /*!< SCL Low Timeout Flag */ -#define I2Cx_SMB_SHTF1 ((uint8_t)0x04) /*!< SCL High Timeout Flag 1 */ -#define I2Cx_SMB_SHTF2 ((uint8_t)0x02) /*!< SCL High Timeout Flag 2 */ -#define I2Cx_SMB_SHTF2IE ((uint8_t)0x01) /*!< SHTF2 Interrupt Enable */ - -/*********** Bits definition for I2Cx_A2 register *************/ -#define I2Cx_A2_SAD ((uint8_t)0xFE) /*!< SMBus Address */ - -#define I2Cx_A2_SAD_SHIFT 1 - -/*********** Bits definition for I2Cx_SLTH register ***********/ -#define I2Cx_SLTH_SSLT ((uint8_t)0xFF) /*!< MSB of SCL low timeout value */ - -/*********** Bits definition for I2Cx_SLTL register ***********/ -#define I2Cx_SLTL_SSLT ((uint8_t)0xFF) /*!< LSB of SCL low timeout value */ - -/****************************************************************/ -/* */ -/* Universal Asynchronous Receiver/Transmitter (UART) */ -/* */ -/****************************************************************/ -/********* Bits definition for UARTx_BDH register *************/ -#define UARTx_BDH_LBKDIE ((uint8_t)0x80) /*!< LIN Break Detect Interrupt Enable */ -#define UARTx_BDH_RXEDGIE ((uint8_t)0x40) /*!< RX Input Active Edge Interrupt Enable */ -#define UARTx_BDH_SBNS ((uint8_t)0x20) /*!< Stop Bit Number Select */ -#define UARTx_BDH_SBR ((uint8_t)0x1F) /*!< Baud Rate Modulo Divisor */ - -/********* Bits definition for UARTx_BDL register *************/ -#define UARTx_BDL_SBR ((uint8_t)0xFF) /*!< Baud Rate Modulo Divisor */ - -/********* Bits definition for UARTx_C1 register **************/ -#define UARTx_C1_LOOPS ((uint8_t)0x80) /*!< Loop Mode Select */ -#define UARTx_C1_DOZEEN ((uint8_t)0x40) /*!< Doze Enable */ -#define UARTx_C1_UARTSWAI ((uint8_t)0x40) /*!< UART Stops in Wait Mode */ -#define UARTx_C1_RSRC ((uint8_t)0x20) /*!< Receiver Source Select */ -#define UARTx_C1_M ((uint8_t)0x10) /*!< 9-Bit or 8-Bit Mode Select */ -#define UARTx_C1_WAKE ((uint8_t)0x08) /*!< Receiver Wakeup Method Select */ -#define UARTx_C1_ILT ((uint8_t)0x04) /*!< Idle Line Type Select */ -#define UARTx_C1_PE ((uint8_t)0x02) /*!< Parity Enable */ -#define UARTx_C1_PT ((uint8_t)0x01) /*!< Parity Type */ - -/********* Bits definition for UARTx_C2 register **************/ -#define UARTx_C2_TIE ((uint8_t)0x80) /*!< Transmit Interrupt Enable for TDRE */ -#define UARTx_C2_TCIE ((uint8_t)0x40) /*!< Transmission Complete Interrupt Enable for TC */ -#define UARTx_C2_RIE ((uint8_t)0x20) /*!< Receiver Interrupt Enable for RDRF */ -#define UARTx_C2_ILIE ((uint8_t)0x10) /*!< Idle Line Interrupt Enable for IDLE */ -#define UARTx_C2_TE ((uint8_t)0x08) /*!< Transmitter Enable */ -#define UARTx_C2_RE ((uint8_t)0x04) /*!< Receiver Enable */ -#define UARTx_C2_RWU ((uint8_t)0x02) /*!< Receiver Wakeup Control */ -#define UARTx_C2_SBK ((uint8_t)0x01) /*!< Send Break */ - -/********* Bits definition for UARTx_S1 register **************/ -#define UARTx_S1_TDRE ((uint8_t)0x80) /*!< Transmit Data Register Empty Flag */ -#define UARTx_S1_TC ((uint8_t)0x40) /*!< Transmission Complete Flag */ -#define UARTx_S1_RDRF ((uint8_t)0x20) /*!< Receiver Data Register Full Flag */ -#define UARTx_S1_IDLE ((uint8_t)0x10) /*!< Idle Line Flag */ -#define UARTx_S1_OR ((uint8_t)0x08) /*!< Receiver Overrun Flag */ -#define UARTx_S1_NF ((uint8_t)0x04) /*!< Noise Flag */ -#define UARTx_S1_FE ((uint8_t)0x02) /*!< Framing Error Flag */ -#define UARTx_S1_PF ((uint8_t)0x01) /*!< Parity Error Flag */ - -/********* Bits definition for UARTx_S2 register **************/ -#define UARTx_S2_LBKDIF ((uint8_t)0x80) /*!< LIN Break Detect Interrupt Flag */ -#define UARTx_S2_RXEDGIF ((uint8_t)0x40) /*!< UART_RX Pin Active Edge Interrupt Flag */ -#define UARTx_S2_MSBF ((uint8_t)0x20) /*!< MSB First */ -#define UARTx_S2_RXINV ((uint8_t)0x10) /*!< Receive Data Inversion */ -#define UARTx_S2_RWUID ((uint8_t)0x08) /*!< Receive Wake Up Idle Detect */ -#define UARTx_S2_BRK13 ((uint8_t)0x04) /*!< Break Character Generation Length */ -#define UARTx_S2_LBKDE ((uint8_t)0x02) /*!< LIN Break Detect Enable */ -#define UARTx_S2_RAF ((uint8_t)0x01) /*!< Receiver Active Flag */ - -/********* Bits definition for UARTx_C3 register **************/ -#define UARTx_C3_R8T9 ((uint8_t)0x80) /*!< Receive Bit 8 / Transmit Bit 9 */ -#define UARTx_C3_R8 ((uint8_t)0x80) /*!< Ninth Data Bit for Receiver */ -#define UARTx_C3_R9T8 ((uint8_t)0x40) /*!< Receive Bit 9 / Transmit Bit 8 */ -#define UARTx_C3_T8 ((uint8_t)0x40) /*!< Ninth Data Bit for Transmitter */ -#define UARTx_C3_TXDIR ((uint8_t)0x20) /*!< UART_TX Pin Direction in Single-Wire Mode */ -#define UARTx_C3_TXINV ((uint8_t)0x10) /*!< Transmit Data Inversion */ -#define UARTx_C3_ORIE ((uint8_t)0x08) /*!< Overrun Interrupt Enable */ -#define UARTx_C3_NEIE ((uint8_t)0x04) /*!< Noise Error Interrupt Enable */ -#define UARTx_C3_FEIE ((uint8_t)0x02) /*!< Framing Error Interrupt Enable */ -#define UARTx_C3_PEIE ((uint8_t)0x01) /*!< Parity Error Interrupt Enable */ - -/********* Bits definition for UARTx_D register ***************/ -#define UARTx_D_R7T7 ((uint8_t)0x80) /*!< Read receive data buffer 7 or write transmit data buffer 7 */ -#define UARTx_D_R6T6 ((uint8_t)0x40) /*!< Read receive data buffer 6 or write transmit data buffer 6 */ -#define UARTx_D_R5T5 ((uint8_t)0x20) /*!< Read receive data buffer 5 or write transmit data buffer 5 */ -#define UARTx_D_R4T4 ((uint8_t)0x10) /*!< Read receive data buffer 4 or write transmit data buffer 4 */ -#define UARTx_D_R3T3 ((uint8_t)0x08) /*!< Read receive data buffer 3 or write transmit data buffer 3 */ -#define UARTx_D_R2T2 ((uint8_t)0x04) /*!< Read receive data buffer 2 or write transmit data buffer 2 */ -#define UARTx_D_R1T1 ((uint8_t)0x02) /*!< Read receive data buffer 1 or write transmit data buffer 1 */ -#define UARTx_D_R0T0 ((uint8_t)0x01) /*!< Read receive data buffer 0 or write transmit data buffer 0 */ - -/********* Bits definition for UARTx_MA1 register *************/ -#define UARTx_MA1_MA ((uint8_t)0xFF) /*!< Match Address */ - -/********* Bits definition for UARTx_MA2 register *************/ -#define UARTx_MA2_MA ((uint8_t)0xFF) /*!< Match Address */ - -/********* Bits definition for UARTx_C4 register **************/ -#define UARTx_C4_MAEN1 ((uint8_t)0x80) /*!< Match Address Mode Enable 1 */ -#define UARTx_C4_TDMAS ((uint8_t)0x80) /*!< Transmitter DMA Select */ -#define UARTx_C4_MAEN2 ((uint8_t)0x40) /*!< Match Address Mode Enable 2 */ -#define UARTx_C4_M10 ((uint8_t)0x20) /*!< 10-bit Mode Select */ -#define UARTx_C4_RDMAS ((uint8_t)0x80) /*!< Receiver Full DMA Select */ -#define UARTx_C4_OSR ((uint8_t)0x1F) /*!< Over Sampling Ratio */ - -/********* Bits definition for UARTx_C5 register **************/ -#define UARTx_C5_TDMAE ((uint8_t)0x80) /*!< Transmitter DMA Enable */ -#define UARTx_C5_RDMAE ((uint8_t)0x20) /*!< Receiver Full DMA Enable */ -#define UARTx_C5_BOTHEDGE ((uint8_t)0x02) /*!< Both Edge Sampling */ -#define UARTx_C5_RESYNCDIS ((uint8_t)0x01) /*!< Resynchronization Disable */ -/****************************************************************/ -/* */ -/* Power Management Controller (PMC) */ -/* */ -/****************************************************************/ -/********* Bits definition for PMC_LVDSC1 register *************/ -#define PMC_LVDSC1_LVDF ((uint8_t)0x80) /*!< Low-Voltage Detect Flag */ -#define PMC_LVDSC1_LVDACK ((uint8_t)0x40) /*!< Low-Voltage Detect Acknowledge */ -#define PMC_LVDSC1_LVDIE ((uint8_t)0x20) /*!< Low-Voltage Detect Interrupt Enable */ -#define PMC_LVDSC1_LVDRE ((uint8_t)0x10) /*!< Low-Voltage Detect Reset Enable */ -#define PMC_LVDSC1_LVDV_MASK ((uint8_t)0x3) /*!< Low-Voltage Detect Voltage Select */ -#define PMC_LVDSC1_LVDV_SHIFT 0 -#define PMC_LVDSC1_LVDV(x) (((uint8_t)(((uint8_t)(x))<<PMC_LVDSC1_LVDV_SHIFT))&PMC_LVDSC1_LVDV_MASK) -/********* Bits definition for PMC_LVDSC1 register *************/ -#define PMC_LVDSC2_LVWF ((uint8_t)0x80) /*!< Low-Voltage Warning Flag */ -#define PMC_LVDSC2_LVWACK ((uint8_t)0x40) /*!< Low-Voltage Warning Acknowledge */ -#define PMC_LVDSC2_LVWIE ((uint8_t)0x20) /*!< Low-Voltage Warning Interrupt Enable */ -#define PMC_LVDSC2_LVWV_MASK 0x3 /*!< Low-Voltage Warning Voltage Select */ -#define PMC_LVDSC2_LVWV_SHIFT 0 -#define PMC_LVDSC2_LVWV(x) (((uint8_t)(((uint8_t)(x))<<PMC_LVDSC2_LVWV_SHIFT))&PMC_LVDSC2_LVWV_MASK) -/********* Bits definition for PMC_REGSC register *************/ -#define PMC_REGSC_BGEN ((uint8_t)0x10) /*!< Bandgap Enable In VLPx Operation */ -#define PMC_REGSC_ACKISO ((uint8_t)0x8) /*!< Acknowledge Isolation */ -#define PMC_REGSC_REGONS ((uint8_t)0x4) /*!< Regulator In Run Regulation Status */ -#define PMC_REGSC_BGBE ((uint8_t)0x1) /*!< Bandgap Buffer Enable */ - -#endif diff --git a/os/hal/ports/KINETIS/KL2x/pal_lld.c b/os/hal/ports/KINETIS/KL2x/pal_lld.c deleted file mode 100644 index a894c6a..0000000 --- a/os/hal/ports/KINETIS/KL2x/pal_lld.c +++ /dev/null @@ -1,225 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2013..2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file KL2x/pal_lld.c
- * @brief Kinetis KL2x PAL subsystem low level driver.
- *
- * @addtogroup PAL
- * @{
- */
-
-#include "osal.h"
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief STM32 I/O ports configuration.
- * @details Ports A-D(E, F, G, H) clocks enabled.
- *
- * @param[in] config the STM32 ports configuration
- *
- * @notapi
- */
-void _pal_lld_init(const PALConfig *config) {
-
- int i, j;
-
- /* Enable clocking of all Ports */
- SIM->SCGC5 |= SIM_SCGC5_PORTA |
- SIM_SCGC5_PORTB |
- SIM_SCGC5_PORTC |
- SIM_SCGC5_PORTD |
- SIM_SCGC5_PORTE;
-
- for (i = 0; i < TOTAL_PORTS; i++) {
- for (j = 0; j < PADS_PER_PORT; j++) {
- pal_lld_setpadmode(config->ports[i].port,
- j,
- config->ports[i].pads[j]);
- }
- }
-}
-
-/**
- * @brief Pads mode setup.
- * @details This function programs a pads group belonging to the same port
- * with the specified mode.
- *
- * @param[in] port the port identifier
- * @param[in] mask the group mask
- * @param[in] mode the mode
- *
- * @notapi
- */
-void _pal_lld_setgroupmode(ioportid_t port,
- ioportmask_t mask,
- iomode_t mode) {
-
- (void)port;
- (void)mask;
- (void)mode;
-
-}
-
-/**
- * @brief Reads a logical state from an I/O pad.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- * @return The logical state.
- * @retval PAL_LOW low logical state.
- * @retval PAL_HIGH high logical state.
- *
- * @notapi
- */
-uint8_t pal_lld_readpad(ioportid_t port, uint8_t pad)
-{
- return (port->PDIR & ((uint32_t) 1 << pad)) ? PAL_HIGH : PAL_LOW;
-}
-
-/**
- * @brief Writes a logical state on an output pad.
- * @note This function is not meant to be invoked directly by the
- * application code.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- * @param[in] bit logical value, the value must be @p PAL_LOW or
- * @p PAL_HIGH
- *
- * @notapi
- */
-void pal_lld_writepad(ioportid_t port, uint8_t pad, uint8_t bit)
-{
- if (bit == PAL_HIGH)
- port->PDOR |= ((uint32_t) 1 << pad);
- else
- port->PDOR &= ~((uint32_t) 1 << pad);
-}
-
-/**
- * @brief Pad mode setup.
- * @details This function programs a pad with the specified mode.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- * @note Programming an unknown or unsupported mode is silently ignored.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- * @param[in] mode pad mode
- *
- * @notapi
- */
-void _pal_lld_setpadmode(ioportid_t port, uint8_t pad, iomode_t mode)
-{
- PORT_TypeDef *portcfg = NULL;
-
- osalDbgAssert(pad <= 31, "pal_lld_setpadmode() - invalid pad");
-
- if (mode == PAL_MODE_OUTPUT_PUSHPULL)
- port->PDDR |= ((uint32_t) 1 << pad);
- else
- port->PDDR &= ~((uint32_t) 1 << pad);
-
- if (port == IOPORT1)
- portcfg = PORTA;
- else if (port == IOPORT2)
- portcfg = PORTB;
- else if (port == IOPORT3)
- portcfg = PORTC;
- else if (port == IOPORT4)
- portcfg = PORTD;
- else if (port == IOPORT5)
- portcfg = PORTE;
-
- osalDbgAssert(portcfg != NULL, "pal_lld_setpadmode() - invalid port");
-
- switch (mode) {
- case PAL_MODE_RESET:
- case PAL_MODE_INPUT:
- case PAL_MODE_OUTPUT_PUSHPULL:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(1);
- break;
- case PAL_MODE_INPUT_PULLUP:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(1) | PORTx_PCRn_PE | PORTx_PCRn_PS;
- break;
- case PAL_MODE_INPUT_PULLDOWN:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(1) | PORTx_PCRn_PE;
- break;
- case PAL_MODE_UNCONNECTED:
- case PAL_MODE_INPUT_ANALOG:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(0);
- break;
- case PAL_MODE_ALTERNATIVE_1:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(1);
- break;
- case PAL_MODE_ALTERNATIVE_2:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(2);
- break;
- case PAL_MODE_ALTERNATIVE_3:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(3);
- break;
- case PAL_MODE_ALTERNATIVE_4:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(4);
- break;
- case PAL_MODE_ALTERNATIVE_5:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(5);
- break;
- case PAL_MODE_ALTERNATIVE_6:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(6);
- break;
- case PAL_MODE_ALTERNATIVE_7:
- portcfg->PCR[pad] = PORTx_PCRn_MUX(7);
- break;
- }
-}
-
-#endif /* HAL_USE_PAL */
-
-/** @} */
diff --git a/os/hal/ports/KINETIS/KL2x/pal_lld.h b/os/hal/ports/KINETIS/KL2x/pal_lld.h deleted file mode 100644 index 8b38709..0000000 --- a/os/hal/ports/KINETIS/KL2x/pal_lld.h +++ /dev/null @@ -1,331 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2013-2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file KL2x/pal_lld.h
- * @brief Kinetis KL2x PAL subsystem low level driver header.
- *
- * @addtogroup PAL
- * @{
- */
-
-#ifndef _PAL_LLD_H_
-#define _PAL_LLD_H_
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Unsupported modes and specific modes */
-/*===========================================================================*/
-
-#undef PAL_MODE_OUTPUT_OPENDRAIN
-
-#define PAL_MODE_ALTERNATIVE_1 0x10
-#define PAL_MODE_ALTERNATIVE_2 0x11
-#define PAL_MODE_ALTERNATIVE_3 0x12
-#define PAL_MODE_ALTERNATIVE_4 0x13
-#define PAL_MODE_ALTERNATIVE_5 0x14
-#define PAL_MODE_ALTERNATIVE_6 0x15
-#define PAL_MODE_ALTERNATIVE_7 0x16
-
-/*===========================================================================*/
-/* I/O Ports Types and constants. */
-/*===========================================================================*/
-
-#define TOTAL_PORTS 5
-#define PADS_PER_PORT 32
-
-/**
- * @brief Digital I/O port sized unsigned type.
- */
-typedef uint32_t ioportmask_t;
-
-/**
- * @brief Digital I/O modes.
- */
-typedef uint8_t iomode_t;
-
-/**
- * @brief Port Identifier.
- * @details This type can be a scalar or some kind of pointer, do not make
- * any assumption about it, use the provided macros when populating
- * variables of this type.
- */
-typedef GPIO_TypeDef * ioportid_t;
-
-typedef struct {
- ioportid_t port;
- iomode_t pads[PADS_PER_PORT];
-} PortConfig;
-
-/**
- * @brief Generic I/O ports static initializer.
- * @details An instance of this structure must be passed to @p palInit() at
- * system startup time in order to initialized the digital I/O
- * subsystem. This represents only the initial setup, specific pads
- * or whole ports can be reprogrammed at later time.
- * @note Implementations may extend this structure to contain more,
- * architecture dependent, fields.
- */
-typedef struct
-{
- PortConfig ports[TOTAL_PORTS];
-} PALConfig;
-
-/**
- * @brief Width, in bits, of an I/O port.
- */
-#define PAL_IOPORTS_WIDTH 32
-
-/**
- * @brief Whole port mask.
- * @brief This macro specifies all the valid bits into a port.
- */
-#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFFFFF)
-
-
-/*===========================================================================*/
-/* I/O Ports Identifiers. */
-/*===========================================================================*/
-
-/**
- * @brief First I/O port identifier.
- * @details Low level drivers can define multiple ports, it is suggested to
- * use this naming convention.
- */
-#define IOPORT1 GPIOA
-#define IOPORT2 GPIOB
-#define IOPORT3 GPIOC
-#define IOPORT4 GPIOD
-#define IOPORT5 GPIOE
-
-/*===========================================================================*/
-/* Implementation, some of the following macros could be implemented as */
-/* functions, if so please put them in pal_lld.c. */
-/*===========================================================================*/
-
-/**
- * @brief Low level PAL subsystem initialization.
- *
- * @param[in] config architecture-dependent ports configuration
- *
- * @notapi
- */
-#define pal_lld_init(config) _pal_lld_init(config)
-
-/**
- * @brief Reads the physical I/O port states.
- *
- * @param[in] port port identifier
- * @return The port bits.
- *
- * @notapi
- */
-#define pal_lld_readport(port) \
- (port)->PDIR
-
-/**
- * @brief Reads the output latch.
- * @details The purpose of this function is to read back the latched output
- * value.
- *
- * @param[in] port port identifier
- * @return The latched logical states.
- *
- * @notapi
- */
-#define pal_lld_readlatch(port) \
- (port)->PDOR
-
-/**
- * @brief Writes a bits mask on a I/O port.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be written on the specified port
- *
- * @notapi
- */
-#define pal_lld_writeport(port, bits) \
- (port)->PDOR = (bits)
-
-/**
- * @brief Sets a bits mask on a I/O port.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be ORed on the specified port
- *
- * @notapi
- */
-#define pal_lld_setport(port, bits) \
- (port)->PSOR = (bits)
-
-/**
- * @brief Clears a bits mask on a I/O port.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be cleared on the specified port
- *
- * @notapi
- */
-#define pal_lld_clearport(port, bits) \
- (port)->PCOR = (bits)
-
-/**
- * @brief Toggles a bits mask on a I/O port.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] bits bits to be XORed on the specified port
- *
- * @notapi
- */
-#define pal_lld_toggleport(port, bits) \
- (port)->PTOR = (bits)
-
-/**
- * @brief Reads a group of bits.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] mask group mask
- * @param[in] offset group bit offset within the port
- * @return The group logical states.
- *
- * @notapi
- */
-#define pal_lld_readgroup(port, mask, offset) 0
-
-/**
- * @brief Writes a group of bits.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] mask group mask
- * @param[in] offset group bit offset within the port
- * @param[in] bits bits to be written. Values exceeding the group width
- * are masked.
- *
- * @notapi
- */
-#define pal_lld_writegroup(port, mask, offset, bits) (void)bits
-
-/**
- * @brief Pads group mode setup.
- * @details This function programs a pads group belonging to the same port
- * with the specified mode.
- * @note Programming an unknown or unsupported mode is silently ignored.
- *
- * @param[in] port port identifier
- * @param[in] mask group mask
- * @param[in] offset group bit offset within the port
- * @param[in] mode group mode
- *
- * @notapi
- */
-#define pal_lld_setgroupmode(port, mask, offset, mode) \
- _pal_lld_setgroupmode(port, mask << offset, mode)
-
-/**
- * @brief Sets a pad logical state to @p PAL_HIGH.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- *
- * @notapi
- */
-#define pal_lld_setpad(port, pad) (port)->PSOR = ((uint32_t) 1 << (pad))
-
-/**
- * @brief Clears a pad logical state to @p PAL_LOW.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- *
- * @notapi
- */
-#define pal_lld_clearpad(port, pad) (port)->PCOR = ((uint32_t) 1 << (pad))
-
-/**
- * @brief Toggles a pad logical state.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- *
- * @notapi
- */
-#define pal_lld_togglepad(port, pad) (port)->PTOR = ((uint32_t) 1 << (pad))
-
-/**
- * @brief Pad mode setup.
- * @details This function programs a pad with the specified mode.
- * @note The @ref PAL provides a default software implementation of this
- * functionality, implement this function if can optimize it by using
- * special hardware functionalities or special coding.
- * @note Programming an unknown or unsupported mode is silently ignored.
- *
- * @param[in] port port identifier
- * @param[in] pad pad number within the port
- * @param[in] mode pad mode
- *
- * @notapi
- */
-#define pal_lld_setpadmode(port, pad, mode) \
- _pal_lld_setpadmode(port, pad, mode)
-
-#if !defined(__DOXYGEN__)
-extern const PALConfig pal_default_config;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void _pal_lld_init(const PALConfig *config);
- void _pal_lld_setgroupmode(ioportid_t port,
- ioportmask_t mask,
- iomode_t mode);
- void pal_lld_setpadmode(ioportid_t port,
- uint8_t pad,
- iomode_t mode);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_PAL */
-
-#endif /* _PAL_LLD_H_ */
-
-/** @} */
diff --git a/os/hal/ports/KINETIS/KL2x/platform.mk b/os/hal/ports/KINETIS/KL2x/platform.mk index f9d3c67..8ababc3 100644 --- a/os/hal/ports/KINETIS/KL2x/platform.mk +++ b/os/hal/ports/KINETIS/KL2x/platform.mk @@ -1,13 +1,15 @@ # List of all platform files.
PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \
${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/KL2x/hal_lld.c \
- ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/KL2x/pal_lld.c \
- ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/KL2x/serial_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/pal_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/serial_lld.c \
${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/i2c_lld.c \
${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/ext_lld.c \
${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/adc_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/gpt_lld.c \
${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/KL2x/pwm_lld.c \
- ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/KL2x/st_lld.c
+ ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/st_lld.c \
+ ${CHIBIOS_CONTRIB}/os/hal/ports/KINETIS/LLD/usb_lld.c
# Required include directories
PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \
diff --git a/os/hal/ports/KINETIS/KL2x/pwm_lld.c b/os/hal/ports/KINETIS/KL2x/pwm_lld.c index 4ba7d6e..2f56216 100644 --- a/os/hal/ports/KINETIS/KL2x/pwm_lld.c +++ b/os/hal/ports/KINETIS/KL2x/pwm_lld.c @@ -27,18 +27,6 @@ #if HAL_USE_PWM || defined(__DOXYGEN__)
/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-#define KINETIS_TPM0_CHANNELS 6
-#define KINETIS_TPM1_CHANNELS 2
-#define KINETIS_TPM2_CHANNELS 2
-
-#define KINETIS_TPM0_HANDLER Vector84
-#define KINETIS_TPM1_HANDLER Vector88
-#define KINETIS_TPM2_HANDLER Vector8C
-
-/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
@@ -80,25 +68,25 @@ static void pwm_lld_serve_interrupt(PWMDriver *pwmp) { sr = pwmp->tpm->STATUS;
pwmp->tpm->STATUS = 0xFFFFFFFF;
- if (((sr & TPM_SC_TOF) != 0) &&
+ if (((sr & TPMx_STATUS_TOF) != 0) &&
(pwmp->config->callback != NULL))
pwmp->config->callback(pwmp);
- if (((sr & TPM_STATUS_CH0F) != 0) &&
+ if (((sr & TPMx_STATUS_CH0F) != 0) &&
(pwmp->config->channels[0].callback != NULL))
pwmp->config->channels[0].callback(pwmp);
- if (((sr & TPM_STATUS_CH1F) != 0) &&
+ if (((sr & TPMx_STATUS_CH1F) != 0) &&
(pwmp->config->channels[1].callback != NULL))
pwmp->config->channels[1].callback(pwmp);
- if (((sr & TPM_STATUS_CH2F) != 0) &&
+ if (((sr & TPMx_STATUS_CH2F) != 0) &&
(pwmp->config->channels[2].callback != NULL))
pwmp->config->channels[2].callback(pwmp);
- if (((sr & TPM_STATUS_CH3F) != 0) &&
+ if (((sr & TPMx_STATUS_CH3F) != 0) &&
(pwmp->config->channels[3].callback != NULL))
pwmp->config->channels[3].callback(pwmp);
- if (((sr & TPM_STATUS_CH4F) != 0) &&
+ if (((sr & TPMx_STATUS_CH4F) != 0) &&
(pwmp->config->channels[4].callback != NULL))
pwmp->config->channels[4].callback(pwmp);
- if (((sr & TPM_STATUS_CH5F) != 0) &&
+ if (((sr & TPMx_STATUS_CH5F) != 0) &&
(pwmp->config->channels[5].callback != NULL))
pwmp->config->channels[5].callback(pwmp);
}
@@ -113,7 +101,7 @@ static void pwm_lld_serve_interrupt(PWMDriver *pwmp) { *
* @isr
*/
-OSAL_IRQ_HANDLER(KINETIS_TPM0_HANDLER) {
+OSAL_IRQ_HANDLER(KINETIS_TPM0_IRQ_VECTOR) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD1);
@@ -127,7 +115,7 @@ OSAL_IRQ_HANDLER(KINETIS_TPM0_HANDLER) { *
* @isr
*/
-OSAL_IRQ_HANDLER(KINETIS_TPM1_HANDLER) {
+OSAL_IRQ_HANDLER(KINETIS_TPM1_IRQ_VECTOR) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD2);
@@ -141,7 +129,7 @@ OSAL_IRQ_HANDLER(KINETIS_TPM1_HANDLER) { *
* @isr
*/
-OSAL_IRQ_HANDLER(KINETIS_TPM2_HANDLER) {
+OSAL_IRQ_HANDLER(KINETIS_TPM2_IRQ_VECTOR) {
OSAL_IRQ_PROLOGUE();
pwm_lld_serve_interrupt(&PWMD3);
@@ -238,7 +226,7 @@ void pwm_lld_start(PWMDriver *pwmp) { CPWM up-counting mode
Timer overflow interrupt disabled
DMA disabled.*/
- pwmp->tpm->SC = TPM_SC_CMOD_LPTPM_CLK | i;
+ pwmp->tpm->SC = TPMx_SC_CMOD_LPTPM_CLK | i;
/* Configure period.*/
pwmp->tpm->MOD = pwmp->period - 1;
}
@@ -297,19 +285,19 @@ void pwm_lld_stop(PWMDriver *pwmp) { void pwm_lld_enable_channel(PWMDriver *pwmp,
pwmchannel_t channel,
pwmcnt_t width) {
- uint32_t mode = TPM_CnSC_MSB; /* Edge-aligned PWM mode.*/
+ uint32_t mode = TPMx_CnSC_MSB; /* Edge-aligned PWM mode.*/
switch (pwmp->config->channels[channel].mode & PWM_OUTPUT_MASK) {
case PWM_OUTPUT_ACTIVE_HIGH:
- mode |= TPM_CnSC_ELSB;
+ mode |= TPMx_CnSC_ELSB;
break;
case PWM_OUTPUT_ACTIVE_LOW:
- mode |= TPM_CnSC_ELSA;
+ mode |= TPMx_CnSC_ELSA;
break;
}
- if (pwmp->tpm->C[channel].SC & TPM_CnSC_CHIE)
- mode |= TPM_CnSC_CHIE;
+ if (pwmp->tpm->C[channel].SC & TPMx_CnSC_CHIE)
+ mode |= TPMx_CnSC_CHIE;
pwmp->tpm->C[channel].SC = mode;
pwmp->tpm->C[channel].V = width;
@@ -344,7 +332,7 @@ void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) { */
void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) {
- pwmp->tpm->SC |= TPM_SC_TOIE;
+ pwmp->tpm->SC |= TPMx_SC_TOIE;
}
/**
@@ -358,7 +346,7 @@ void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) { */
void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) {
- pwmp->tpm->SC &= ~TPM_SC_TOIE;
+ pwmp->tpm->SC &= ~TPMx_SC_TOIE;
}
/**
@@ -375,7 +363,7 @@ void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) { void pwm_lld_enable_channel_notification(PWMDriver *pwmp,
pwmchannel_t channel) {
- pwmp->tpm->C[channel].SC |= TPM_CnSC_CHIE;
+ pwmp->tpm->C[channel].SC |= TPMx_CnSC_CHIE;
}
/**
@@ -392,7 +380,7 @@ void pwm_lld_enable_channel_notification(PWMDriver *pwmp, void pwm_lld_disable_channel_notification(PWMDriver *pwmp,
pwmchannel_t channel) {
- pwmp->tpm->C[channel].SC &= ~TPM_CnSC_CHIE;
+ pwmp->tpm->C[channel].SC &= ~TPMx_CnSC_CHIE;
}
#endif /* HAL_USE_PWM */
diff --git a/os/hal/ports/KINETIS/KL2x/pwm_lld.h b/os/hal/ports/KINETIS/KL2x/pwm_lld.h index fe255bd..5a3d7c2 100644 --- a/os/hal/ports/KINETIS/KL2x/pwm_lld.h +++ b/os/hal/ports/KINETIS/KL2x/pwm_lld.h @@ -25,8 +25,6 @@ #ifndef _PWM_LLD_H_
#define _PWM_LLD_H_
-#include "kinetis_tpm.h"
-
#if HAL_USE_PWM || defined(__DOXYGEN__)
/*===========================================================================*/
@@ -65,16 +63,80 @@ #if !defined(KINETIS_PWM_USE_ADVANCED) || defined(__DOXYGEN__)
#define KINETIS_PWM_USE_ADVANCED FALSE
#endif
+
+/**
+ * @brief TPM0 interrupt priority level setting.
+ * @note The default is 2.
+ */
+#if !defined(KINETIS_PWM_TPM0_IRQ_PRIORITY)|| defined(__DOXYGEN__)
+#define KINETIS_PWM_TPM0_IRQ_PRIORITY 2
+#endif
+
+/**
+ * @brief TPM1 interrupt priority level setting.
+ * @note The default is 2.
+ */
+#if !defined(KINETIS_PWM_TPM1_IRQ_PRIORITY)|| defined(__DOXYGEN__)
+#define KINETIS_PWM_TPM1_IRQ_PRIORITY 2
+#endif
+
+/**
+ * @brief TPM2 interrupt priority level setting.
+ * @note The default is 2.
+ */
+#if !defined(KINETIS_PWM_TPM2_IRQ_PRIORITY)|| defined(__DOXYGEN__)
+#define KINETIS_PWM_TPM2_IRQ_PRIORITY 2
+#endif
+
/** @} */
/*===========================================================================*/
/* Configuration checks. */
/*===========================================================================*/
+#if KINETIS_PWM_USE_TPM0 && !KINETIS_HAS_TPM0
+#error "TPM0 not present in the selected device"
+#endif
+
+#if KINETIS_PWM_USE_TPM1 && !KINETIS_HAS_TPM1
+#error "TPM1 not present in the selected device"
+#endif
+
+#if KINETIS_PWM_USE_TPM2 && !KINETIS_HAS_TPM2
+#error "TPM2 not present in the selected device"
+#endif
+
#if !KINETIS_PWM_USE_TPM0 && !KINETIS_PWM_USE_TPM1 && !KINETIS_PWM_USE_TPM2
#error "PWM driver activated but no TPM peripheral assigned"
#endif
+#if KINETIS_PWM_USE_TPM0 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_PWM_TPM0_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to KINETIS_PWM_TPM0_IRQ_PRIORITY"
+#endif
+
+#if KINETIS_PWM_USE_TPM1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_PWM_TPM1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to KINETIS_PWM_TPM1_IRQ_PRIORITY"
+#endif
+
+#if KINETIS_PWM_USE_TPM2 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(KINETIS_PWM_TPM2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to KINETIS_PWM_TPM2_IRQ_PRIORITY"
+#endif
+
+#if !defined(KINETIS_TPM0_IRQ_VECTOR)
+#error "KINETIS_TPM0_IRQ_VECTOR not defined"
+#endif
+
+#if !defined(KINETIS_TPM1_IRQ_VECTOR)
+#error "KINETIS_TPM1_IRQ_VECTOR not defined"
+#endif
+
+#if !defined(KINETIS_TPM2_IRQ_VECTOR)
+#error "KINETIS_TPM2_IRQ_VECTOR not defined"
+#endif
+
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
diff --git a/os/hal/ports/KINETIS/KL2x/serial_lld.c b/os/hal/ports/KINETIS/KL2x/serial_lld.c deleted file mode 100644 index f0cbc46..0000000 --- a/os/hal/ports/KINETIS/KL2x/serial_lld.c +++ /dev/null @@ -1,353 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2013-2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file KL2x/serial_lld.c
- * @brief Kinetis KL2x Serial Driver subsystem low level driver source.
- *
- * @addtogroup SERIAL
- * @{
- */
-
-#include "osal.h"
-#include "hal.h"
-
-#if HAL_USE_SERIAL || defined(__DOXYGEN__)
-
-#include "kl25z.h"
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/**
- * @brief SD1 driver identifier.
- */
-#if KINETIS_SERIAL_USE_UART0 || defined(__DOXYGEN__)
-SerialDriver SD1;
-#endif
-
-#if KINETIS_SERIAL_USE_UART1 || defined(__DOXYGEN__)
-SerialDriver SD2;
-#endif
-
-#if KINETIS_SERIAL_USE_UART2 || defined(__DOXYGEN__)
-SerialDriver SD3;
-#endif
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/**
- * @brief Driver default configuration.
- */
-static const SerialConfig default_config = {
- 38400
-};
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/**
- * @brief Common IRQ handler.
- * @note Tries hard to clear all the pending interrupt sources, we don't
- * want to go through the whole ISR and have another interrupt soon
- * after.
- *
- * @param[in] u pointer to an UART I/O block
- * @param[in] sdp communication channel associated to the UART
- */
-static void serve_interrupt(SerialDriver *sdp) {
- UARTLP_TypeDef *u = sdp->uart;
-
- if (u->S1 & UARTx_S1_RDRF) {
- osalSysLockFromISR();
- if (iqIsEmptyI(&sdp->iqueue))
- chnAddFlagsI(sdp, CHN_INPUT_AVAILABLE);
- if (iqPutI(&sdp->iqueue, u->D) < Q_OK)
- chnAddFlagsI(sdp, SD_OVERRUN_ERROR);
- osalSysUnlockFromISR();
- }
-
- if (u->S1 & UARTx_S1_TDRE) {
- msg_t b;
-
- osalSysLockFromISR();
- b = oqGetI(&sdp->oqueue);
- osalSysUnlockFromISR();
-
- if (b < Q_OK) {
- osalSysLockFromISR();
- chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
- osalSysUnlockFromISR();
- u->C2 &= ~UARTx_C2_TIE;
- } else {
- u->D = b;
- }
- }
-
- if (u->S1 & UARTx_S1_IDLE)
- u->S1 = UARTx_S1_IDLE; // Clear IDLE (S1 bits are write-1-to-clear).
-
- if (u->S1 & (UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF)) {
- // FIXME: need to add set_error()
- // Clear flags (S1 bits are write-1-to-clear).
- u->S1 = UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF;
- }
-}
-
-/**
- * @brief Attempts a TX preload
- */
-static void preload(SerialDriver *sdp) {
- UARTLP_TypeDef *u = sdp->uart;
-
- if (u->S1 & UARTx_S1_TDRE) {
- msg_t b = oqGetI(&sdp->oqueue);
- if (b < Q_OK) {
- chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
- return;
- }
- u->D = b;
- u->C2 |= UARTx_C2_TIE;
- }
-}
-
-/**
- * @brief Driver output notification.
- */
-#if KINETIS_SERIAL_USE_UART0 || defined(__DOXYGEN__)
-static void notify1(io_queue_t *qp)
-{
- (void)qp;
- preload(&SD1);
-}
-#endif
-
-#if KINETIS_SERIAL_USE_UART1 || defined(__DOXYGEN__)
-static void notify2(io_queue_t *qp)
-{
- (void)qp;
- preload(&SD2);
-}
-#endif
-
-#if KINETIS_SERIAL_USE_UART2 || defined(__DOXYGEN__)
-static void notify3(io_queue_t *qp)
-{
- (void)qp;
- preload(&SD3);
-}
-#endif
-
-/**
- * @brief Common UART configuration.
- *
- */
-static void configure_uart(UARTLP_TypeDef *uart, const SerialConfig *config)
-{
- uint32_t uart_clock;
-
- uart->C1 = 0;
- uart->C3 = UARTx_C3_ORIE | UARTx_C3_NEIE | UARTx_C3_FEIE | UARTx_C3_PEIE;
- uart->S1 = UARTx_S1_IDLE | UARTx_S1_OR | UARTx_S1_NF | UARTx_S1_FE | UARTx_S1_PF;
- while (uart->S1 & UARTx_S1_RDRF) {
- (void)uart->D;
- }
-
-#if KINETIS_SERIAL_USE_UART0
- if (uart == UART0) {
- /* UART0 can be clocked from several sources. */
- uart_clock = KINETIS_UART0_CLOCK_FREQ;
- }
-#endif
-#if KINETIS_SERIAL_USE_UART1
- if (uart == UART1) {
- uart_clock = KINETIS_BUSCLK_FREQUENCY;
- }
-#endif
-#if KINETIS_SERIAL_USE_UART2
- if (uart == UART2) {
- uart_clock = KINETIS_BUSCLK_FREQUENCY;
- }
-#endif
-
- /* FIXME: change fixed OSR = 16 to dynamic value based on baud */
- uint16_t divisor = (uart_clock / 16) / config->sc_speed;
- uart->C4 = UARTx_C4_OSR & (16 - 1);
- uart->BDH = (divisor >> 8) & UARTx_BDH_SBR;
- uart->BDL = (divisor & UARTx_BDL_SBR);
-
- uart->C2 = UARTx_C2_RE | UARTx_C2_RIE | UARTx_C2_TE;
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if KINETIS_SERIAL_USE_UART0 || defined(__DOXYGEN__)
-OSAL_IRQ_HANDLER(Vector70) {
-
- OSAL_IRQ_PROLOGUE();
- serve_interrupt(&SD1);
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-
-#if KINETIS_SERIAL_USE_UART1 || defined(__DOXYGEN__)
-OSAL_IRQ_HANDLER(Vector74) {
-
- OSAL_IRQ_PROLOGUE();
- serve_interrupt(&SD2);
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-
-#if KINETIS_SERIAL_USE_UART2 || defined(__DOXYGEN__)
-OSAL_IRQ_HANDLER(Vector78) {
-
- OSAL_IRQ_PROLOGUE();
- serve_interrupt(&SD3);
- OSAL_IRQ_EPILOGUE();
-}
-#endif
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level serial driver initialization.
- *
- * @notapi
- */
-void sd_lld_init(void) {
-
-#if KINETIS_SERIAL_USE_UART0
- /* Driver initialization.*/
- sdObjectInit(&SD1, NULL, notify1);
- SD1.uart = UART0;
-#endif
-
-#if KINETIS_SERIAL_USE_UART1
- /* Driver initialization.*/
- sdObjectInit(&SD2, NULL, notify2);
- SD2.uart = UART1;
-#endif
-
-#if KINETIS_SERIAL_USE_UART2
- /* Driver initialization.*/
- sdObjectInit(&SD3, NULL, notify3);
- SD3.uart = UART2;
-#endif
-}
-
-/**
- * @brief Low level serial driver configuration and (re)start.
- *
- * @param[in] sdp pointer to a @p SerialDriver object
- * @param[in] config the architecture-dependent serial driver configuration.
- * If this parameter is set to @p NULL then a default
- * configuration is used.
- *
- * @notapi
- */
-void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
-
- if (config == NULL)
- config = &default_config;
-
- if (sdp->state == SD_STOP) {
- /* Enables the peripheral.*/
-
-#if KINETIS_SERIAL_USE_UART0
- if (sdp == &SD1) {
- SIM->SCGC4 |= SIM_SCGC4_UART0;
- SIM->SOPT2 =
- (SIM->SOPT2 & ~SIM_SOPT2_UART0SRC_MASK) |
- SIM_SOPT2_UART0SRC(KINETIS_UART0_CLOCK_SRC);
- configure_uart(sdp->uart, config);
- nvicEnableVector(UART0_IRQn, KINETIS_SERIAL_UART0_PRIORITY);
- }
-#endif /* KINETIS_SERIAL_USE_UART0 */
-
-#if KINETIS_SERIAL_USE_UART1
- if (sdp == &SD2) {
- SIM->SCGC4 |= SIM_SCGC4_UART1;
- configure_uart(sdp->uart, config);
- nvicEnableVector(UART1_IRQn, KINETIS_SERIAL_UART1_PRIORITY);
- }
-#endif /* KINETIS_SERIAL_USE_UART1 */
-
-#if KINETIS_SERIAL_USE_UART2
- if (sdp == &SD3) {
- SIM->SCGC4 |= SIM_SCGC4_UART2;
- configure_uart(sdp->uart, config);
- nvicEnableVector(UART2_IRQn, KINETIS_SERIAL_UART2_PRIORITY);
- }
-#endif /* KINETIS_SERIAL_USE_UART2 */
-
- }
- /* Configures the peripheral.*/
-
-}
-
-/**
- * @brief Low level serial driver stop.
- * @details De-initializes the USART, stops the associated clock, resets the
- * interrupt vector.
- *
- * @param[in] sdp pointer to a @p SerialDriver object
- *
- * @notapi
- */
-void sd_lld_stop(SerialDriver *sdp) {
-
- if (sdp->state == SD_READY) {
- /* TODO: Resets the peripheral.*/
-
-#if KINETIS_SERIAL_USE_UART0
- if (sdp == &SD1) {
- nvicDisableVector(UART0_IRQn);
- SIM->SCGC4 &= ~SIM_SCGC4_UART0;
- }
-#endif
-
-#if KINETIS_SERIAL_USE_UART1
- if (sdp == &SD2) {
- nvicDisableVector(UART1_IRQn);
- SIM->SCGC4 &= ~SIM_SCGC4_UART1;
- }
-#endif
-
-#if KINETIS_SERIAL_USE_UART2
- if (sdp == &SD3) {
- nvicDisableVector(UART2_IRQn);
- SIM->SCGC4 &= ~SIM_SCGC4_UART2;
- }
-#endif
- }
-}
-
-#endif /* HAL_USE_SERIAL */
-
-/** @} */
diff --git a/os/hal/ports/KINETIS/KL2x/serial_lld.h b/os/hal/ports/KINETIS/KL2x/serial_lld.h deleted file mode 100644 index 2d003b0..0000000 --- a/os/hal/ports/KINETIS/KL2x/serial_lld.h +++ /dev/null @@ -1,163 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2013-2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file KL2x/serial_lld.h
- * @brief Kinetis KL2x Serial Driver subsystem low level driver header.
- *
- * @addtogroup SERIAL
- * @{
- */
-
-#ifndef _SERIAL_LLD_H_
-#define _SERIAL_LLD_H_
-
-#if HAL_USE_SERIAL || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name Configuration options
- * @{
- */
-/**
- * @brief SD1 driver enable switch.
- * @details If set to @p TRUE the support for SD1 is included.
- */
-#if !defined(KINETIS_SERIAL_USE_UART0) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_USE_UART0 FALSE
-#endif
-/**
- * @brief SD2 driver enable switch.
- * @details If set to @p TRUE the support for SD2 is included.
- */
-#if !defined(KINETIS_SERIAL_USE_UART1) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_USE_UART1 FALSE
-#endif
-/**
- * @brief SD3 driver enable switch.
- * @details If set to @p TRUE the support for SD3 is included.
- */
-#if !defined(KINETIS_SERIAL_USE_UART2) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_USE_UART2 FALSE
-#endif
-
-/**
- * @brief UART0 interrupt priority level setting.
- */
-#if !defined(KINETIS_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_UART0_PRIORITY 12
-#endif
-
-/**
- * @brief UART1 interrupt priority level setting.
- */
-#if !defined(KINETIS_SERIAL_UART1_PRIORITY) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_UART1_PRIORITY 12
-#endif
-
-/**
- * @brief UART2 interrupt priority level setting.
- */
-#if !defined(KINETIS_SERIAL_UART2_PRIORITY) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_UART2_PRIORITY 12
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief Generic Serial Driver configuration structure.
- * @details An instance of this structure must be passed to @p sdStart()
- * in order to configure and start a serial driver operations.
- * @note Implementations may extend this structure to contain more,
- * architecture dependent, fields.
- */
-typedef struct {
- /**
- * @brief Bit rate.
- */
- uint32_t sc_speed;
- /* End of the mandatory fields.*/
-} SerialConfig;
-
-/**
- * @brief @p SerialDriver specific data.
- */
-#define _serial_driver_data \
- _base_asynchronous_channel_data \
- /* Driver state.*/ \
- sdstate_t state; \
- /* Input queue.*/ \
- input_queue_t iqueue; \
- /* Output queue.*/ \
- output_queue_t oqueue; \
- /* Input circular buffer.*/ \
- uint8_t ib[SERIAL_BUFFERS_SIZE]; \
- /* Output circular buffer.*/ \
- uint8_t ob[SERIAL_BUFFERS_SIZE]; \
- /* End of the mandatory fields.*/ \
- /* Pointer to the UART registers block.*/ \
- UARTLP_TypeDef *uart;
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if KINETIS_SERIAL_USE_UART0 && !defined(__DOXYGEN__)
-extern SerialDriver SD1;
-#endif
-
-#if KINETIS_SERIAL_USE_UART1 && !defined(__DOXYGEN__)
-extern SerialDriver SD2;
-#endif
-
-#if KINETIS_SERIAL_USE_UART2 && !defined(__DOXYGEN__)
-extern SerialDriver SD3;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void sd_lld_init(void);
- void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
- void sd_lld_stop(SerialDriver *sdp);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_SERIAL */
-
-#endif /* _SERIAL_LLD_H_ */
-
-/** @} */
diff --git a/os/hal/ports/KINETIS/KL2x/st_lld.c b/os/hal/ports/KINETIS/KL2x/st_lld.c deleted file mode 100644 index 1f8cb63..0000000 --- a/os/hal/ports/KINETIS/KL2x/st_lld.c +++ /dev/null @@ -1,98 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2014-2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file KINETIS/KL2x/st_lld.c
- * @brief ST Driver subsystem low level driver code.
- *
- * @addtogroup ST
- * @{
- */
-
-#include "hal.h"
-
-#if (OSAL_ST_MODE != OSAL_ST_MODE_NONE) || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if (OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC) || defined(__DOXYGEN__)
-/**
- * @brief System Timer vector.
- * @details This interrupt is used for system tick in periodic mode.
- *
- * @isr
- */
-OSAL_IRQ_HANDLER(SysTick_Handler) {
-
- OSAL_IRQ_PROLOGUE();
-
- osalSysLockFromISR();
- osalOsTimerHandlerI();
- osalSysUnlockFromISR();
-
- OSAL_IRQ_EPILOGUE();
-}
-#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level ST driver initialization.
- *
- * @notapi
- */
-void st_lld_init(void) {
-#if OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC
- /* Periodic systick mode, the Cortex-Mx internal systick timer is used
- in this mode.*/
- SysTick->LOAD = (KINETIS_SYSCLK_FREQUENCY / OSAL_ST_FREQUENCY) - 1;
- SysTick->VAL = 0;
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_ENABLE_Msk |
- SysTick_CTRL_TICKINT_Msk;
-
- /* IRQ enabled.*/
- nvicSetSystemHandlerPriority(HANDLER_SYSTICK, KINETIS_ST_IRQ_PRIORITY);
-#endif /* OSAL_ST_MODE == OSAL_ST_MODE_PERIODIC */
-}
-
-#endif /* OSAL_ST_MODE != OSAL_ST_MODE_NONE */
-
-/** @} */
diff --git a/os/hal/ports/KINETIS/KL2x/st_lld.h b/os/hal/ports/KINETIS/KL2x/st_lld.h deleted file mode 100644 index 24044e5..0000000 --- a/os/hal/ports/KINETIS/KL2x/st_lld.h +++ /dev/null @@ -1,156 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2014-2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file KINETIS/st_lld.h
- * @brief ST Driver subsystem low level driver header.
- * @details This header is designed to be include-able without having to
- * include other files from the HAL.
- *
- * @addtogroup ST
- * @{
- */
-
-#ifndef _ST_LLD_H_
-#define _ST_LLD_H_
-
-#include "mcuconf.h"
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name Configuration options
- * @{
- */
-/**
- * @brief SysTick timer IRQ priority.
- */
-#if !defined(KINETIS_ST_IRQ_PRIORITY) || defined(__DOXYGEN__)
-#define KINETIS_ST_IRQ_PRIORITY 8
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void st_lld_init(void);
-#ifdef __cplusplus
-}
-#endif
-
-/*===========================================================================*/
-/* Driver inline functions. */
-/*===========================================================================*/
-
-/**
- * @brief Returns the time counter value.
- *
- * @return The counter value.
- *
- * @notapi
- */
-static inline systime_t st_lld_get_counter(void) {
-
- return (systime_t)0;
-}
-
-/**
- * @brief Starts the alarm.
- * @note Makes sure that no spurious alarms are triggered after
- * this call.
- *
- * @param[in] time the time to be set for the first alarm
- *
- * @notapi
- */
-static inline void st_lld_start_alarm(systime_t time) {
-
- (void)time;
-}
-
-/**
- * @brief Stops the alarm interrupt.
- *
- * @notapi
- */
-static inline void st_lld_stop_alarm(void) {
-
-}
-
-/**
- * @brief Sets the alarm time.
- *
- * @param[in] time the time to be set for the next alarm
- *
- * @notapi
- */
-static inline void st_lld_set_alarm(systime_t time) {
-
- (void)time;
-}
-
-/**
- * @brief Returns the current alarm time.
- *
- * @return The currently set alarm time.
- *
- * @notapi
- */
-static inline systime_t st_lld_get_alarm(void) {
-
- return (systime_t)0;
-}
-
-/**
- * @brief Determines if the alarm is active.
- *
- * @return The alarm status.
- * @retval false if the alarm is not active.
- * @retval true is the alarm is active
- *
- * @notapi
- */
-static inline bool st_lld_is_alarm_active(void) {
-
- return false;
-}
-
-#endif /* _ST_LLD_H_ */
-
-/** @} */
|