diff options
Diffstat (limited to 'os/hal/ports/KINETIS/K20x/serial_lld.h')
| -rw-r--r-- | os/hal/ports/KINETIS/K20x/serial_lld.h | 163 |
1 files changed, 163 insertions, 0 deletions
diff --git a/os/hal/ports/KINETIS/K20x/serial_lld.h b/os/hal/ports/KINETIS/K20x/serial_lld.h new file mode 100644 index 0000000..736cfe3 --- /dev/null +++ b/os/hal/ports/KINETIS/K20x/serial_lld.h @@ -0,0 +1,163 @@ +/*
+ ChibiOS - Copyright (C) 2014-2015 Fabio Utzig
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file K20x/serial_lld.h
+ * @brief Kinetis K20x Serial Driver subsystem low level driver header.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#ifndef _SERIAL_LLD_H_
+#define _SERIAL_LLD_H_
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief SD1 driver enable switch.
+ * @details If set to @p TRUE the support for SD1 is included.
+ */
+#if !defined(KINETIS_SERIAL_USE_UART0) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_USE_UART0 FALSE
+#endif
+/**
+ * @brief SD2 driver enable switch.
+ * @details If set to @p TRUE the support for SD2 is included.
+ */
+#if !defined(KINETIS_SERIAL_USE_UART1) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_USE_UART1 FALSE
+#endif
+/**
+ * @brief SD3 driver enable switch.
+ * @details If set to @p TRUE the support for SD3 is included.
+ */
+#if !defined(KINETIS_SERIAL_USE_UART2) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_USE_UART2 FALSE
+#endif
+
+/**
+ * @brief UART0 interrupt priority level setting.
+ */
+#if !defined(KINETIS_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_UART0_PRIORITY 12
+#endif
+
+/**
+ * @brief UART1 interrupt priority level setting.
+ */
+#if !defined(KINETIS_SERIAL_UART1_PRIORITY) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_UART1_PRIORITY 12
+#endif
+
+/**
+ * @brief UART2 interrupt priority level setting.
+ */
+#if !defined(KINETIS_SERIAL_UART2_PRIORITY) || defined(__DOXYGEN__)
+#define KINETIS_SERIAL_UART2_PRIORITY 12
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Generic Serial Driver configuration structure.
+ * @details An instance of this structure must be passed to @p sdStart()
+ * in order to configure and start a serial driver operations.
+ * @note Implementations may extend this structure to contain more,
+ * architecture dependent, fields.
+ */
+typedef struct {
+ /**
+ * @brief Bit rate.
+ */
+ uint32_t sc_speed;
+ /* End of the mandatory fields.*/
+} SerialConfig;
+
+/**
+ * @brief @p SerialDriver specific data.
+ */
+#define _serial_driver_data \
+ _base_asynchronous_channel_data \
+ /* Driver state.*/ \
+ sdstate_t state; \
+ /* Input queue.*/ \
+ input_queue_t iqueue; \
+ /* Output queue.*/ \
+ output_queue_t oqueue; \
+ /* Input circular buffer.*/ \
+ uint8_t ib[SERIAL_BUFFERS_SIZE]; \
+ /* Output circular buffer.*/ \
+ uint8_t ob[SERIAL_BUFFERS_SIZE]; \
+ /* End of the mandatory fields.*/ \
+ /* Pointer to the UART registers block.*/ \
+ UART_TypeDef *uart;
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if KINETIS_SERIAL_USE_UART0 && !defined(__DOXYGEN__)
+extern SerialDriver SD1;
+#endif
+
+#if KINETIS_SERIAL_USE_UART1 && !defined(__DOXYGEN__)
+extern SerialDriver SD2;
+#endif
+
+#if KINETIS_SERIAL_USE_UART2 && !defined(__DOXYGEN__)
+extern SerialDriver SD3;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void sd_lld_init(void);
+ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
+ void sd_lld_stop(SerialDriver *sdp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SERIAL */
+
+#endif /* _SERIAL_LLD_H_ */
+
+/** @} */
|