diff options
Diffstat (limited to 'os/hal/ports/KINETIS/K20x/serial_lld.h')
| -rw-r--r-- | os/hal/ports/KINETIS/K20x/serial_lld.h | 163 |
1 files changed, 0 insertions, 163 deletions
diff --git a/os/hal/ports/KINETIS/K20x/serial_lld.h b/os/hal/ports/KINETIS/K20x/serial_lld.h deleted file mode 100644 index 736cfe3..0000000 --- a/os/hal/ports/KINETIS/K20x/serial_lld.h +++ /dev/null @@ -1,163 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2014-2015 Fabio Utzig
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file K20x/serial_lld.h
- * @brief Kinetis K20x Serial Driver subsystem low level driver header.
- *
- * @addtogroup SERIAL
- * @{
- */
-
-#ifndef _SERIAL_LLD_H_
-#define _SERIAL_LLD_H_
-
-#if HAL_USE_SERIAL || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver constants. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver pre-compile time settings. */
-/*===========================================================================*/
-
-/**
- * @name Configuration options
- * @{
- */
-/**
- * @brief SD1 driver enable switch.
- * @details If set to @p TRUE the support for SD1 is included.
- */
-#if !defined(KINETIS_SERIAL_USE_UART0) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_USE_UART0 FALSE
-#endif
-/**
- * @brief SD2 driver enable switch.
- * @details If set to @p TRUE the support for SD2 is included.
- */
-#if !defined(KINETIS_SERIAL_USE_UART1) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_USE_UART1 FALSE
-#endif
-/**
- * @brief SD3 driver enable switch.
- * @details If set to @p TRUE the support for SD3 is included.
- */
-#if !defined(KINETIS_SERIAL_USE_UART2) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_USE_UART2 FALSE
-#endif
-
-/**
- * @brief UART0 interrupt priority level setting.
- */
-#if !defined(KINETIS_SERIAL_UART0_PRIORITY) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_UART0_PRIORITY 12
-#endif
-
-/**
- * @brief UART1 interrupt priority level setting.
- */
-#if !defined(KINETIS_SERIAL_UART1_PRIORITY) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_UART1_PRIORITY 12
-#endif
-
-/**
- * @brief UART2 interrupt priority level setting.
- */
-#if !defined(KINETIS_SERIAL_UART2_PRIORITY) || defined(__DOXYGEN__)
-#define KINETIS_SERIAL_UART2_PRIORITY 12
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Derived constants and error checks. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types. */
-/*===========================================================================*/
-
-/**
- * @brief Generic Serial Driver configuration structure.
- * @details An instance of this structure must be passed to @p sdStart()
- * in order to configure and start a serial driver operations.
- * @note Implementations may extend this structure to contain more,
- * architecture dependent, fields.
- */
-typedef struct {
- /**
- * @brief Bit rate.
- */
- uint32_t sc_speed;
- /* End of the mandatory fields.*/
-} SerialConfig;
-
-/**
- * @brief @p SerialDriver specific data.
- */
-#define _serial_driver_data \
- _base_asynchronous_channel_data \
- /* Driver state.*/ \
- sdstate_t state; \
- /* Input queue.*/ \
- input_queue_t iqueue; \
- /* Output queue.*/ \
- output_queue_t oqueue; \
- /* Input circular buffer.*/ \
- uint8_t ib[SERIAL_BUFFERS_SIZE]; \
- /* Output circular buffer.*/ \
- uint8_t ob[SERIAL_BUFFERS_SIZE]; \
- /* End of the mandatory fields.*/ \
- /* Pointer to the UART registers block.*/ \
- UART_TypeDef *uart;
-
-/*===========================================================================*/
-/* Driver macros. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations. */
-/*===========================================================================*/
-
-#if KINETIS_SERIAL_USE_UART0 && !defined(__DOXYGEN__)
-extern SerialDriver SD1;
-#endif
-
-#if KINETIS_SERIAL_USE_UART1 && !defined(__DOXYGEN__)
-extern SerialDriver SD2;
-#endif
-
-#if KINETIS_SERIAL_USE_UART2 && !defined(__DOXYGEN__)
-extern SerialDriver SD3;
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
- void sd_lld_init(void);
- void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
- void sd_lld_stop(SerialDriver *sdp);
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* HAL_USE_SERIAL */
-
-#endif /* _SERIAL_LLD_H_ */
-
-/** @} */
|