3 files changed, 136 insertions, 0 deletions
diff --git a/os/hal/boards/WVSHARE_BLE400/board.c b/os/hal/boards/WVSHARE_BLE400/board.c
new file mode 100644
index 0000000..bee9490
--- /dev/null
+++ b/os/hal/boards/WVSHARE_BLE400/board.c
@@ -0,0 +1,85 @@
+/*
+    Copyright (C) 2015 Fabio Utzig
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config =
+{
+  .pads = {
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_OUTPUT_PUSHPULL,            // UART_TX
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,                      // UART_RX
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_OUTPUT_PUSHPULL,            // LED0
+    PAL_MODE_OUTPUT_PUSHPULL,            // LED1
+    PAL_MODE_OUTPUT_PUSHPULL,            // LED2
+    PAL_MODE_OUTPUT_PUSHPULL,            // LED3
+    PAL_MODE_OUTPUT_PUSHPULL,            // LED4
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+    PAL_MODE_INPUT,
+  },
+};
+#endif
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization is performed just after reset before BSS and
+ *          DATA segments initialization.
+ */
+void __early_init(void)
+{
+}
+
+/**
+ * @brief   Late initialization code.
+ * @note    This initialization is performed after BSS and DATA segments
+ *          initialization and before invoking the main() function.
+ */
+void boardInit(void)
+{
+  //FIXME: not really needed yet
+  //NRF_CLOCK->XTALFREQ = 0xff;
+  //NRF_CLOCK->EVENTS_HFCLKSTARTED = 0;
+  //NRF_CLOCK->TASKS_HFCLKSTART = 1;
+  //while (!NRF_CLOCK->EVENTS_HFCLKSTARTED) {}
+}
diff --git a/os/hal/boards/WVSHARE_BLE400/board.h b/os/hal/boards/WVSHARE_BLE400/board.h
new file mode 100644
index 0000000..957fe7e
--- /dev/null
+++ b/os/hal/boards/WVSHARE_BLE400/board.h
@@ -0,0 +1,46 @@
+/*
+    Copyright (C) 2015 Fabio Utzig
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/* Board identifier. */
+#define BOARD_WVSHARE_BLE400
+#define BOARD_NAME              "WvShare BLE400"
+
+/* Board oscillators-related settings. */
+#define XTAL_VALUE              16000000
+
+/* GPIO pins. */
+#define LED0           18
+#define LED1           19
+#define LED2           20
+#define LED3           21
+#define LED4           22
+#define UART_TX        9
+#define UART_RX        11
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
diff --git a/os/hal/boards/WVSHARE_BLE400/board.mk b/os/hal/boards/WVSHARE_BLE400/board.mk
new file mode 100644
index 0000000..1fddc87
--- /dev/null
+++ b/os/hal/boards/WVSHARE_BLE400/board.mk
@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = ${CHIBIOS}/community/os/hal/boards/WVSHARE_BLE400/board.c
+
+# Required include directories
+BOARDINC = ${CHIBIOS}/community/os/hal/boards/WVSHARE_BLE400