diff options
Diffstat (limited to 'os/common/ext/TivaWare/inc/hw_lcd.h')
| -rw-r--r-- | os/common/ext/TivaWare/inc/hw_lcd.h | 575 |
1 files changed, 575 insertions, 0 deletions
diff --git a/os/common/ext/TivaWare/inc/hw_lcd.h b/os/common/ext/TivaWare/inc/hw_lcd.h new file mode 100644 index 0000000..f8711be --- /dev/null +++ b/os/common/ext/TivaWare/inc/hw_lcd.h @@ -0,0 +1,575 @@ +//***************************************************************************** +// +// hw_lcd.h - Defines and macros used when accessing the LCD controller. +// +// Copyright (c) 2011-2016 Texas Instruments Incorporated. All rights reserved. +// Software License Agreement +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the +// distribution. +// +// Neither the name of Texas Instruments Incorporated nor the names of +// its contributors may be used to endorse or promote products derived +// from this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package. +// +//***************************************************************************** + +#ifndef __HW_LCD_H__ +#define __HW_LCD_H__ + +//***************************************************************************** +// +// The following are defines for the LCD register offsets. +// +//***************************************************************************** +#define LCD_O_PID 0x00000000 // LCD PID Register Format +#define LCD_O_CTL 0x00000004 // LCD Control +#define LCD_O_LIDDCTL 0x0000000C // LCD LIDD Control +#define LCD_O_LIDDCS0CFG 0x00000010 // LCD LIDD CS0 Configuration +#define LCD_O_LIDDCS0ADDR 0x00000014 // LIDD CS0 Read/Write Address +#define LCD_O_LIDDCS0DATA 0x00000018 // LIDD CS0 Data Read/Write + // Initiation +#define LCD_O_LIDDCS1CFG 0x0000001C // LIDD CS1 Configuration +#define LCD_O_LIDDCS1ADDR 0x00000020 // LIDD CS1 Address Read/Write + // Initiation +#define LCD_O_LIDDCS1DATA 0x00000024 // LIDD CS1 Data Read/Write + // Initiation +#define LCD_O_RASTRCTL 0x00000028 // LCD Raster Control +#define LCD_O_RASTRTIM0 0x0000002C // LCD Raster Timing 0 +#define LCD_O_RASTRTIM1 0x00000030 // LCD Raster Timing 1 +#define LCD_O_RASTRTIM2 0x00000034 // LCD Raster Timing 2 +#define LCD_O_RASTRSUBP1 0x00000038 // LCD Raster Subpanel Display 1 +#define LCD_O_RASTRSUBP2 0x0000003C // LCD Raster Subpanel Display 2 +#define LCD_O_DMACTL 0x00000040 // LCD DMA Control +#define LCD_O_DMABAFB0 0x00000044 // LCD DMA Frame Buffer 0 Base + // Address +#define LCD_O_DMACAFB0 0x00000048 // LCD DMA Frame Buffer 0 Ceiling + // Address +#define LCD_O_DMABAFB1 0x0000004C // LCD DMA Frame Buffer 1 Base + // Address +#define LCD_O_DMACAFB1 0x00000050 // LCD DMA Frame Buffer 1 Ceiling + // Address +#define LCD_O_SYSCFG 0x00000054 // LCD System Configuration + // Register +#define LCD_O_RISSET 0x00000058 // LCD Interrupt Raw Status and Set + // Register +#define LCD_O_MISCLR 0x0000005C // LCD Interrupt Status and Clear +#define LCD_O_IM 0x00000060 // LCD Interrupt Mask +#define LCD_O_IENC 0x00000064 // LCD Interrupt Enable Clear +#define LCD_O_CLKEN 0x0000006C // LCD Clock Enable +#define LCD_O_CLKRESET 0x00000070 // LCD Clock Resets + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_PID register. +// +//***************************************************************************** +#define LCD_PID_MAJOR_M 0x00000700 // Major Release Number +#define LCD_PID_MINOR_M 0x0000003F // Minor Release Number +#define LCD_PID_MAJOR_S 8 +#define LCD_PID_MINOR_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_CTL register. +// +//***************************************************************************** +#define LCD_CTL_CLKDIV_M 0x0000FF00 // Clock Divisor +#define LCD_CTL_UFLOWRST 0x00000002 // Underflow Restart +#define LCD_CTL_LCDMODE 0x00000001 // LCD Mode Select +#define LCD_CTL_CLKDIV_S 8 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCTL register. +// +//***************************************************************************** +#define LCD_LIDDCTL_DMACS 0x00000200 // CS0/CS1 Select for LIDD DMA + // Writes +#define LCD_LIDDCTL_DMAEN 0x00000100 // LIDD DMA Enable +#define LCD_LIDDCTL_CS1E1 0x00000080 // Chip Select 1 (CS1)/Enable 1(E1) + // Polarity Control +#define LCD_LIDDCTL_CS0E0 0x00000040 // Chip Select 0 (CS0)/Enable 0 + // (E0) Polarity Control +#define LCD_LIDDCTL_WRDIRINV 0x00000020 // Write Strobe (WR) /Direction + // (DIR) Polarity Control +#define LCD_LIDDCTL_RDEN 0x00000010 // Read Strobe (RD) /Direct Enable + // (EN) Polarity Control +#define LCD_LIDDCTL_ALE 0x00000008 // Address Latch Enable (ALE) + // Polarity Control +#define LCD_LIDDCTL_MODE_M 0x00000007 // LIDD Mode Select +#define LCD_LIDDCTL_MODE_SYNCM68 \ + 0x00000000 // Synchronous Motorola 6800 Mode +#define LCD_LIDDCTL_MODE_ASYNCM68 \ + 0x00000001 // Asynchronous Motorola 6800 Mode +#define LCD_LIDDCTL_MODE_SYNCM80 \ + 0x00000002 // Synchronous Intel 8080 mode +#define LCD_LIDDCTL_MODE_ASYNCM80 \ + 0x00000003 // Asynchronous Intel 8080 mode +#define LCD_LIDDCTL_MODE_ASYNCHIT \ + 0x00000004 // Asynchronous Hitachi mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS0CFG +// register. +// +//***************************************************************************** +#define LCD_LIDDCS0CFG_WRSU_M 0xF8000000 // Write Strobe (WR) Set-Up Cycles +#define LCD_LIDDCS0CFG_WRDUR_M 0x07E00000 // Write Strobe (WR) Duration + // Cycles +#define LCD_LIDDCS0CFG_WRHOLD_M 0x001E0000 // Write Strobe (WR) Hold cycles +#define LCD_LIDDCS0CFG_RDSU_M 0x0001F000 // Read Strobe (RD) Set-Up cycles +#define LCD_LIDDCS0CFG_RDDUR_M 0x00000FC0 // Read Strobe (RD) Duration cycles +#define LCD_LIDDCS0CFG_RDHOLD_M 0x0000003C // Read Strobe (RD) Hold cycles +#define LCD_LIDDCS0CFG_GAP_M 0x00000003 // Field value defines the number + // of LCDMCLK cycles (GAP +1) + // between the end of one CS0 + // (LCDAC) device access and the + // start of another CS0 (LCDAC) + // device access unless the two + // accesses are both reads +#define LCD_LIDDCS0CFG_WRSU_S 27 +#define LCD_LIDDCS0CFG_WRDUR_S 21 +#define LCD_LIDDCS0CFG_WRHOLD_S 17 +#define LCD_LIDDCS0CFG_RDSU_S 12 +#define LCD_LIDDCS0CFG_RDDUR_S 6 +#define LCD_LIDDCS0CFG_RDHOLD_S 2 +#define LCD_LIDDCS0CFG_GAP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS0ADDR +// register. +// +//***************************************************************************** +#define LCD_LIDDCS0ADDR_CS0ADDR_M \ + 0x0000FFFF // LCD Address +#define LCD_LIDDCS0ADDR_CS0ADDR_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS0DATA +// register. +// +//***************************************************************************** +#define LCD_LIDDCS0DATA_CS0DATA_M \ + 0x0000FFFF // LCD Data Read/Write +#define LCD_LIDDCS0DATA_CS0DATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS1CFG +// register. +// +//***************************************************************************** +#define LCD_LIDDCS1CFG_WRSU_M 0xF8000000 // Write Strobe (WR) Set-Up Cycles +#define LCD_LIDDCS1CFG_WRDUR_M 0x07E00000 // Write Strobe (WR) Duration + // Cycles +#define LCD_LIDDCS1CFG_WRHOLD_M 0x001E0000 // Write Strobe (WR) Hold cycles +#define LCD_LIDDCS1CFG_RDSU_M 0x0001F000 // Read Strobe (RD) Set-Up cycles +#define LCD_LIDDCS1CFG_RDDUR_M 0x00000FC0 // Read Strobe (RD) Duration cycles +#define LCD_LIDDCS1CFG_RDHOLD_M 0x0000003C // Read Strobe (RD) Hold cycles +#define LCD_LIDDCS1CFG_GAP_M 0x00000003 // Field value defines the number + // of LCDMCLK cycles (GAP + 1) + // between the end of one CS1 + // (LCDAC) device access and the + // start of another CS0 (LCDAC) + // device access unless the two + // accesses are both reads +#define LCD_LIDDCS1CFG_WRSU_S 27 +#define LCD_LIDDCS1CFG_WRDUR_S 21 +#define LCD_LIDDCS1CFG_WRHOLD_S 17 +#define LCD_LIDDCS1CFG_RDSU_S 12 +#define LCD_LIDDCS1CFG_RDDUR_S 6 +#define LCD_LIDDCS1CFG_RDHOLD_S 2 +#define LCD_LIDDCS1CFG_GAP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS1ADDR +// register. +// +//***************************************************************************** +#define LCD_LIDDCS1ADDR_CS1ADDR_M \ + 0x0000FFFF // LCD Address Bus +#define LCD_LIDDCS1ADDR_CS1ADDR_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_LIDDCS1DATA +// register. +// +//***************************************************************************** +#define LCD_LIDDCS1DATA_CS0DATA_M \ + 0x0000FFFF // LCD Data Read/Write Initiation +#define LCD_LIDDCS1DATA_CS0DATA_S \ + 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRCTL register. +// +//***************************************************************************** +#define LCD_RASTRCTL_TFT24UPCK 0x04000000 // 24-bit TFT Mode Packing +#define LCD_RASTRCTL_TFT24 0x02000000 // 24-Bit TFT Mode +#define LCD_RASTRCTL_FRMBUFSZ 0x01000000 // Frame Buffer Select +#define LCD_RASTRCTL_TFTMAP 0x00800000 // TFT Mode Alternate Signal + // Mapping for Palettized + // Framebuffer +#define LCD_RASTRCTL_NIBMODE 0x00400000 // Nibble Mode +#define LCD_RASTRCTL_PALMODE_M 0x00300000 // Pallette Loading Mode +#define LCD_RASTRCTL_PALMODE_PALDAT \ + 0x00000000 // Palette and data loading, reset + // value +#define LCD_RASTRCTL_PALMODE_PAL \ + 0x00100000 // Palette loading only +#define LCD_RASTRCTL_PALMODE_DAT \ + 0x00200000 // Data loading only +#define LCD_RASTRCTL_REQDLY_M 0x000FF000 // Palette Loading Delay +#define LCD_RASTRCTL_MONO8B 0x00000200 // Mono 8-Bit +#define LCD_RASTRCTL_RDORDER 0x00000100 // Raster Data Order Select +#define LCD_RASTRCTL_LCDTFT 0x00000080 // LCD TFT +#define LCD_RASTRCTL_LCDBW 0x00000002 // LCD Monochrome +#define LCD_RASTRCTL_LCDEN 0x00000001 // LCD Controller Enable for Raster + // Operations +#define LCD_RASTRCTL_REQDLY_S 12 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRTIM0 +// register. +// +//***************************************************************************** +#define LCD_RASTRTIM0_HBP_M 0xFF000000 // Horizontal Back Porch Lowbits +#define LCD_RASTRTIM0_HFP_M 0x00FF0000 // Horizontal Front Porch Lowbits +#define LCD_RASTRTIM0_HSW_M 0x0000FC00 // Horizontal Sync Pulse Width + // Lowbits +#define LCD_RASTRTIM0_PPL_M 0x000003F0 // Pixels-per-line LSB[9:4] +#define LCD_RASTRTIM0_MSBPPL 0x00000008 // Pixels-per-line MSB[10] +#define LCD_RASTRTIM0_HBP_S 24 +#define LCD_RASTRTIM0_HFP_S 16 +#define LCD_RASTRTIM0_HSW_S 10 +#define LCD_RASTRTIM0_PPL_S 4 +#define LCD_RASTRTIM0_MSBPPL_S 3 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRTIM1 +// register. +// +//***************************************************************************** +#define LCD_RASTRTIM1_VBP_M 0xFF000000 // Vertical Back Porch +#define LCD_RASTRTIM1_VFP_M 0x00FF0000 // Vertical Front Porch +#define LCD_RASTRTIM1_VSW_M 0x0000FC00 // Vertical Sync Width Pulse +#define LCD_RASTRTIM1_LPP_M 0x000003FF // Lines Per Panel +#define LCD_RASTRTIM1_VBP_S 24 +#define LCD_RASTRTIM1_VFP_S 16 +#define LCD_RASTRTIM1_VSW_S 10 +#define LCD_RASTRTIM1_LPP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRTIM2 +// register. +// +//***************************************************************************** +#define LCD_RASTRTIM2_HSW_M 0x78000000 // Bits 9:6 of the horizontal sync + // width field +#define LCD_RASTRTIM2_MSBLPP 0x04000000 // MSB of Lines Per Panel +#define LCD_RASTRTIM2_PXLCLKCTL 0x02000000 // Hsync/Vsync Pixel Clock Control + // On/Off +#define LCD_RASTRTIM2_PSYNCRF 0x01000000 // Program HSYNC/VSYNC Rise or Fall +#define LCD_RASTRTIM2_INVOE 0x00800000 // Invert Output Enable +#define LCD_RASTRTIM2_INVPXLCLK 0x00400000 // Invert Pixel Clock +#define LCD_RASTRTIM2_IHS 0x00200000 // Invert Hysync +#define LCD_RASTRTIM2_IVS 0x00100000 // Invert Vsync +#define LCD_RASTRTIM2_ACBI_M 0x000F0000 // AC Bias Pins Transitions per + // Interrupt +#define LCD_RASTRTIM2_ACBF_M 0x0000FF00 // AC Bias Pin Frequency +#define LCD_RASTRTIM2_MSBHBP_M 0x00000030 // Bits 9:8 of the horizontal back + // porch field +#define LCD_RASTRTIM2_MSBHFP_M 0x00000003 // Bits 9:8 of the horizontal front + // porch field +#define LCD_RASTRTIM2_HSW_S 27 +#define LCD_RASTRTIM2_MSBLPP_S 26 +#define LCD_RASTRTIM2_ACBI_S 16 +#define LCD_RASTRTIM2_ACBF_S 8 +#define LCD_RASTRTIM2_MSBHBP_S 4 +#define LCD_RASTRTIM2_MSBHFP_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRSUBP1 +// register. +// +//***************************************************************************** +#define LCD_RASTRSUBP1_SPEN 0x80000000 // Sub Panel Enable +#define LCD_RASTRSUBP1_HOLS 0x20000000 // High or Low Signal +#define LCD_RASTRSUBP1_LPPT_M 0x03FF0000 // Line Per Panel Threshold +#define LCD_RASTRSUBP1_DPDLSB_M 0x0000FFFF // Default Pixel Data LSB[15:0] +#define LCD_RASTRSUBP1_LPPT_S 16 +#define LCD_RASTRSUBP1_DPDLSB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RASTRSUBP2 +// register. +// +//***************************************************************************** +#define LCD_RASTRSUBP2_LPPTMSB 0x00000100 // Lines Per Panel Threshold Bit 10 +#define LCD_RASTRSUBP2_DPDMSB_M 0x000000FF // Default Pixel Data MSB [23:16] +#define LCD_RASTRSUBP2_DPDMSB_S 0 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_DMACTL register. +// +//***************************************************************************** +#define LCD_DMACTL_FIFORDY_M 0x00000700 // DMA FIFO threshold +#define LCD_DMACTL_FIFORDY_8 0x00000000 // 8 words +#define LCD_DMACTL_FIFORDY_16 0x00000100 // 16 words +#define LCD_DMACTL_FIFORDY_32 0x00000200 // 32 words +#define LCD_DMACTL_FIFORDY_64 0x00000300 // 64 words +#define LCD_DMACTL_FIFORDY_128 0x00000400 // 128 words +#define LCD_DMACTL_FIFORDY_256 0x00000500 // 256 words +#define LCD_DMACTL_FIFORDY_512 0x00000600 // 512 words +#define LCD_DMACTL_BURSTSZ_M 0x00000070 // Burst Size setting for DMA + // transfers (all DMA transfers are + // 32 bits wide): +#define LCD_DMACTL_BURSTSZ_4 0x00000020 // burst size of 4 +#define LCD_DMACTL_BURSTSZ_8 0x00000030 // burst size of 8 +#define LCD_DMACTL_BURSTSZ_16 0x00000040 // burst size of 16 +#define LCD_DMACTL_BYTESWAP 0x00000008 // This bit controls the bytelane + // ordering of the data on the + // output of the DMA module +#define LCD_DMACTL_BIGDEND 0x00000002 // Big Endian Enable +#define LCD_DMACTL_FMODE 0x00000001 // Frame Mode + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_DMABAFB0 register. +// +//***************************************************************************** +#define LCD_DMABAFB0_FB0BA_M 0xFFFFFFFC // Frame Buffer 0 Base Address + // pointer +#define LCD_DMABAFB0_FB0BA_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_DMACAFB0 register. +// +//***************************************************************************** +#define LCD_DMACAFB0_FB0CA_M 0xFFFFFFFC // Frame Buffer 0 Ceiling Address + // pointer +#define LCD_DMACAFB0_FB0CA_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_DMABAFB1 register. +// +//***************************************************************************** +#define LCD_DMABAFB1_FB1BA_M 0xFFFFFFFC // Frame Buffer 1 Base Address + // pointer +#define LCD_DMABAFB1_FB1BA_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_DMACAFB1 register. +// +//***************************************************************************** +#define LCD_DMACAFB1_FB1CA_M 0xFFFFFFFC // Frame Buffer 1 Ceiling Address + // pointer +#define LCD_DMACAFB1_FB1CA_S 2 + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_SYSCFG register. +// +//***************************************************************************** +#define LCD_SYSCFG_STDBY_M 0x00000030 // Standby Mode +#define LCD_SYSCFG_STDBY_FORCE 0x00000000 // Force-standby mode: local + // initiator is unconditionally + // placed in standby state. Backup + // mode, for debug only +#define LCD_SYSCFG_STDBY_NONE 0x00000010 // No-standby mode: local initiator + // is unconditionally placed out of + // standby state. Backup mode, for + // debug only +#define LCD_SYSCFG_STDBY_SMART 0x00000020 // Smart-standby mode: local + // initiator standby status depends + // on local conditions, that is, + // the module's functional + // requirement from the initiator. + // IP module shall not generate + // (initiator-related) wakeup + // events +#define LCD_SYSCFG_IDLEMODE_M 0x0000000C // Idle Mode +#define LCD_SYSCFG_IDLEMODE_FORCE \ + 0x00000000 // Force-idle mode: local target's + // idle state follows + // (acknowledges) the system's idle + // requests unconditionally, that + // is, regardless of the IP + // module's internal requirements. + // Backup mode, for debug only +#define LCD_SYSCFG_IDLEMODE_NONE \ + 0x00000004 // No-idle mode: local target never + // enters idle state. Backup mode, + // for debug only +#define LCD_SYSCFG_IDLEMODE_SMART \ + 0x00000008 // Smart-idle mode: local target's + // idle state eventually follows + // (acknowledges) the system's idle + // requests, depending on the IP + // module's internal requirements. + // IP module shall not generate + // (IRQ- or DMA-requestrelated) + // wakeup events + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_RISSET register. +// +//***************************************************************************** +#define LCD_RISSET_EOF1 0x00000200 // DMA End-of-Frame 1 Raw Interrupt + // Status and Set +#define LCD_RISSET_EOF0 0x00000100 // DMA End-of-Frame 0 Raw Interrupt + // Status and Set +#define LCD_RISSET_PALLOAD 0x00000040 // DMA Palette Loaded Raw Interrupt + // Status and Set +#define LCD_RISSET_FIFOU 0x00000020 // DMA FIFO Underflow Raw Interrupt + // Status and Set +#define LCD_RISSET_ACBS 0x00000008 // AC Bias Count Raw Interrupt + // Status and Set +#define LCD_RISSET_SYNCS 0x00000004 // Frame Synchronization Lost Raw + // Interrupt Status and Set +#define LCD_RISSET_RRASTRDONE 0x00000002 // Raster Mode Frame Done interrupt +#define LCD_RISSET_DONE 0x00000001 // Raster or LIDD Frame Done + // (shared, depends on whether + // Raster or LIDD mode enabled) Raw + // Interrupt Status and Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_MISCLR register. +// +//***************************************************************************** +#define LCD_MISCLR_EOF1 0x00000200 // DMA End-of-Frame 1 Enabled + // Interrupt and Clear +#define LCD_MISCLR_EOF0 0x00000100 // DMA End-of-Frame 0 Raw Interrupt + // and Clear +#define LCD_MISCLR_PALLOAD 0x00000040 // DMA Palette Loaded Enabled + // Interrupt and Clear +#define LCD_MISCLR_FIFOU 0x00000020 // DMA FIFO Underflow Enabled + // Interrupt and Clear +#define LCD_MISCLR_ACBS 0x00000008 // AC Bias Count Enabled Interrupt + // and Clear +#define LCD_MISCLR_SYNCS 0x00000004 // Frame Synchronization Lost + // Enabled Interrupt and Clear +#define LCD_MISCLR_RRASTRDONE 0x00000002 // Raster Mode Frame Done interrupt +#define LCD_MISCLR_DONE 0x00000001 // Raster or LIDD Frame Done + // (shared, depends on whether + // Raster or LIDD mode enabled) + // Enabled Interrupt and Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_IM register. +// +//***************************************************************************** +#define LCD_IM_EOF1 0x00000200 // DMA End-of-Frame 1 Interrupt + // Enable Set +#define LCD_IM_EOF0 0x00000100 // DMA End-of-Frame 0 Interrupt + // Enable Set +#define LCD_IM_PALLOAD 0x00000040 // DMA Palette Loaded Interrupt + // Enable Set +#define LCD_IM_FIFOU 0x00000020 // DMA FIFO Underflow Interrupt + // Enable Set +#define LCD_IM_ACBS 0x00000008 // AC Bias Count Interrupt Enable + // Set +#define LCD_IM_SYNCS 0x00000004 // Frame Synchronization Lost + // Interrupt Enable Set +#define LCD_IM_RRASTRDONE 0x00000002 // Raster Mode Frame Done Interrupt + // Enable Set +#define LCD_IM_DONE 0x00000001 // Raster or LIDD Frame Done + // (shared, depends on whether + // Raster or LIDD mode enabled) + // Interrupt Enable Set + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_IENC register. +// +//***************************************************************************** +#define LCD_IENC_EOF1 0x00000200 // DMA End-of-Frame 1 Interrupt + // Enable Clear +#define LCD_IENC_EOF0 0x00000100 // DMA End-of-Frame 0 Interrupt + // Enable Clear +#define LCD_IENC_PALLOAD 0x00000040 // DMA Palette Loaded Interrupt + // Enable Clear +#define LCD_IENC_FIFOU 0x00000020 // DMA FIFO Underflow Interrupt + // Enable Clear +#define LCD_IENC_ACBS 0x00000008 // AC Bias Count Interrupt Enable + // Clear +#define LCD_IENC_SYNCS 0x00000004 // Frame Synchronization Lost + // Interrupt Enable Clear +#define LCD_IENC_RRASTRDONE 0x00000002 // Raster Mode Frame Done Interrupt + // Enable Clear +#define LCD_IENC_DONE 0x00000001 // Raster or LIDD Frame Done + // (shared, depends on whether + // Raster or LIDD mode enabled) + // Interrupt Enable Clear + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_CLKEN register. +// +//***************************************************************************** +#define LCD_CLKEN_DMA 0x00000004 // DMA Clock Enable +#define LCD_CLKEN_LIDD 0x00000002 // LIDD Submodule Clock Enable +#define LCD_CLKEN_CORE 0x00000001 // LCD Core Clock Enable + +//***************************************************************************** +// +// The following are defines for the bit fields in the LCD_O_CLKRESET register. +// +//***************************************************************************** +#define LCD_CLKRESET_MAIN 0x00000008 // Software Reset for the entire + // LCD module +#define LCD_CLKRESET_DMA 0x00000004 // Software Reset for the DMA + // submodule +#define LCD_CLKRESET_LIDD 0x00000002 // Software Reset for the LIDD + // submodule (character displays) +#define LCD_CLKRESET_CORE 0x00000001 // Software Reset for the Core, + // which encompasses the Raster + // Active Matrix and Passive Matrix + // logic + +#endif // __HW_LCD_H__ |