diff options
| -rw-r--r-- | os/hal/ports/NRF51/NRF51822/gpt_lld.c | 358 | ||||
| -rw-r--r-- | os/hal/ports/NRF51/NRF51822/gpt_lld.h | 266 | ||||
| -rw-r--r-- | os/hal/ports/NRF51/NRF51822/platform.mk | 3 | ||||
| -rw-r--r-- | testhal/NRF51/NRF51822/GPT/Makefile | 211 | ||||
| -rw-r--r-- | testhal/NRF51/NRF51822/GPT/chconf.h | 499 | ||||
| -rw-r--r-- | testhal/NRF51/NRF51822/GPT/halconf.h | 334 | ||||
| -rw-r--r-- | testhal/NRF51/NRF51822/GPT/main.c | 124 | ||||
| -rw-r--r-- | testhal/NRF51/NRF51822/GPT/mcuconf.h | 26 | ||||
| -rw-r--r-- | testhal/NRF51/NRF51822/GPT/readme.txt | 19 |
9 files changed, 1839 insertions, 1 deletions
diff --git a/os/hal/ports/NRF51/NRF51822/gpt_lld.c b/os/hal/ports/NRF51/NRF51822/gpt_lld.c new file mode 100644 index 0000000..f39470f --- /dev/null +++ b/os/hal/ports/NRF51/NRF51822/gpt_lld.c @@ -0,0 +1,358 @@ +/*
+ ChibiOS - 2015 Stephen Caudle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file NRF51x22/gpt_lld.c
+ * @brief NRF51x22 GPT subsystem low level driver source.
+ *
+ * @addtogroup GPT
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_GPT || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#define NRF51_TIMER_PRESCALER_NUM 10
+#define NRF51_TIMER_COMPARE_NUM 4
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief GPTD1 driver identifier.
+ * @note The driver GPTD1 allocates the complex timer TIM1 when enabled.
+ */
+#if NRF51_GPT_USE_TIMER0 || defined(__DOXYGEN__)
+GPTDriver GPTD1;
+#endif
+
+/**
+ * @brief GPTD2 driver identifier.
+ * @note The driver GPTD2 allocates the timer TIM2 when enabled.
+ */
+#if NRF51_GPT_USE_TIMER1 || defined(__DOXYGEN__)
+GPTDriver GPTD2;
+#endif
+
+/**
+ * @brief GPTD3 driver identifier.
+ * @note The driver GPTD3 allocates the timer TIM3 when enabled.
+ */
+#if NRF51_GPT_USE_TIMER2 || defined(__DOXYGEN__)
+GPTDriver GPTD3;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+static uint8_t prescaler(uint16_t freq)
+{
+ uint8_t i;
+ static const gptfreq_t frequencies[] = {
+ NRF51_GPT_FREQ_16MHZ,
+ NRF51_GPT_FREQ_8MHZ,
+ NRF51_GPT_FREQ_4MHZ,
+ NRF51_GPT_FREQ_2MHZ,
+ NRF51_GPT_FREQ_1MHZ,
+ NRF51_GPT_FREQ_500KHZ,
+ NRF51_GPT_FREQ_250KHZ,
+ NRF51_GPT_FREQ_125KHZ,
+ NRF51_GPT_FREQ_62500HZ,
+ NRF51_GPT_FREQ_31250HZ,
+ };
+
+ for (i = 0; i < NRF51_TIMER_PRESCALER_NUM; i++)
+ if (freq == frequencies[i])
+ return i;
+
+ osalDbgAssert(FALSE, "invalid timer frequency");
+
+ return 0;
+}
+
+/**
+ * @brief Shared IRQ handler.
+ *
+ * @param[in] gptp pointer to a @p GPTDriver object
+ */
+static void gpt_lld_serve_interrupt(GPTDriver *gptp) {
+
+ gptp->tim->EVENTS_COMPARE[gptp->cc_int] = 0;
+ if (gptp->state == GPT_ONESHOT)
+ gptp->state = GPT_READY; /* Back in GPT_READY state. */
+ gptp->config->callback(gptp);
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if NRF51_GPT_USE_TIMER0
+/**
+ * @brief TIMER0 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector60) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD1);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* NRF51_GPT_USE_TIMER0 */
+
+#if NRF51_GPT_USE_TIMER1
+/**
+ * @brief TIMER1 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector64) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD2);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* NRF51_GPT_USE_TIMER1 */
+
+#if NRF51_GPT_USE_TIMER2
+/**
+ * @brief TIMER2 interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector68) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ gpt_lld_serve_interrupt(&GPTD3);
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif /* NRF51_GPT_USE_TIMER2 */
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level GPT driver initialization.
+ *
+ * @notapi
+ */
+void gpt_lld_init(void) {
+
+#if NRF51_GPT_USE_TIMER0
+ /* Driver initialization.*/
+ GPTD1.tim = NRF_TIMER0;
+ gptObjectInit(&GPTD1);
+#endif
+
+#if NRF51_GPT_USE_TIMER1
+ /* Driver initialization.*/
+ GPTD2.tim = NRF_TIMER1;
+ gptObjectInit(&GPTD2);
+#endif
+
+#if NRF51_GPT_USE_TIMER2
+ /* Driver initialization.*/
+ GPTD3.tim = NRF_TIMER2;
+ gptObjectInit(&GPTD3);
+#endif
+}
+
+/**
+ * @brief Configures and activates the GPT peripheral.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ *
+ * @notapi
+ */
+void gpt_lld_start(GPTDriver *gptp) {
+
+ NRF_TIMER_Type *tim = gptp->tim;
+
+ if (gptp->state == GPT_STOP) {
+ osalDbgAssert(gptp->cc_int < NRF51_TIMER_COMPARE_NUM,
+ "invalid capture/compare index");
+
+ tim->INTENSET = TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int;
+#if NRF51_GPT_USE_TIMER0
+ if (&GPTD1 == gptp)
+ nvicEnableVector(TIMER0_IRQn, NRF51_GPT_TIMER0_IRQ_PRIORITY);
+#endif
+#if NRF51_GPT_USE_TIMER1
+ if (&GPTD2 == gptp)
+ nvicEnableVector(TIMER1_IRQn, NRF51_GPT_TIMER1_IRQ_PRIORITY);
+#endif
+#if NRF51_GPT_USE_TIMER2
+ if (&GPTD3 == gptp)
+ nvicEnableVector(TIMER2_IRQn, NRF51_GPT_TIMER2_IRQ_PRIORITY);
+#endif
+ }
+
+ /* Prescaler value calculation.*/
+ tim->PRESCALER = prescaler(gptp->config->frequency);
+
+ /* Timer configuration.*/
+ tim->MODE = TIMER_MODE_MODE_Timer << TIMER_MODE_MODE_Pos;
+
+ switch (gptp->config->resolution) {
+
+ case 8:
+ tim->BITMODE = TIMER_BITMODE_BITMODE_08Bit << TIMER_BITMODE_BITMODE_Pos;
+ break;
+
+ case 16:
+ tim->BITMODE = TIMER_BITMODE_BITMODE_16Bit << TIMER_BITMODE_BITMODE_Pos;
+ break;
+
+#if NRF51_GPT_USE_TIMER0
+ case 24:
+ tim->BITMODE = TIMER_BITMODE_BITMODE_24Bit << TIMER_BITMODE_BITMODE_Pos;
+ break;
+
+ case 32:
+ tim->BITMODE = TIMER_BITMODE_BITMODE_32Bit << TIMER_BITMODE_BITMODE_Pos;
+ break;
+#endif
+
+ default:
+ osalDbgAssert(FALSE, "invalid timer resolution");
+ break;
+ };
+}
+
+/**
+ * @brief Deactivates the GPT peripheral.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ *
+ * @notapi
+ */
+void gpt_lld_stop(GPTDriver *gptp) {
+
+ if (gptp->state == GPT_READY) {
+ gptp->tim->TASKS_SHUTDOWN = 1;
+
+#if NRF51_GPT_USE_TIMER0
+ if (&GPTD1 == gptp)
+ nvicDisableVector(TIMER0_IRQn);
+#endif
+#if NRF51_GPT_USE_TIMER1
+ if (&GPTD2 == gptp)
+ nvicDisableVector(TIMER1_IRQn);
+#endif
+#if NRF51_GPT_USE_TIMER2
+ if (&GPTD3 == gptp)
+ nvicDisableVector(TIMER2_IRQn);
+#endif
+ gptp->tim->INTENCLR = TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int;
+ }
+}
+
+/**
+ * @brief Starts the timer in continuous mode.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ * @param[in] interval period in ticks
+ *
+ * @notapi
+ */
+void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t interval) {
+
+ NRF_TIMER_Type *tim = gptp->tim;
+
+ tim->TASKS_CLEAR = 1;
+ tim->CC[gptp->cc_int] = (uint32_t)(interval - 1); /* Time constant. */
+ if (gptp->state == GPT_ONESHOT)
+ gptp->tim->SHORTS = TIMER_SHORTS_COMPARE0_STOP_Msk << gptp->cc_int;
+ else if (gptp->state == GPT_CONTINUOUS)
+ gptp->tim->SHORTS = TIMER_SHORTS_COMPARE0_CLEAR_Msk << gptp->cc_int;
+ tim->TASKS_START = 1;
+}
+
+/**
+ * @brief Stops the timer.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ *
+ * @notapi
+ */
+void gpt_lld_stop_timer(GPTDriver *gptp) {
+
+ gptp->tim->TASKS_STOP = 1;
+}
+
+/**
+ * @brief Starts the timer in one shot mode and waits for completion.
+ * @details This function specifically polls the timer waiting for completion
+ * in order to not have extra delays caused by interrupt servicing,
+ * this function is only recommended for short delays.
+ *
+ * @param[in] gptp pointer to the @p GPTDriver object
+ * @param[in] interval time interval in ticks
+ *
+ * @notapi
+ */
+void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval) {
+
+ NRF_TIMER_Type *tim = gptp->tim;
+
+ tim->INTENCLR = (1UL << gptp->cc_int) << TIMER_INTENSET_COMPARE0_Pos;
+ tim->TASKS_CLEAR = 1;
+ tim->CC[gptp->cc_int] = (uint32_t)(interval - 1); /* Time constant. */
+ tim->TASKS_START = 1;
+ while (!(tim->INTENSET & (TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int)))
+ ;
+ tim->INTENSET = TIMER_INTENSET_COMPARE0_Msk << gptp->cc_int;
+}
+
+/**
+ * @brief Returns the counter value of GPT peripheral.
+ * @pre The GPT unit must be running in continuous mode.
+ * @note The nature of the counter is not defined, it may count upward
+ * or downward, it could be continuously running or not.
+ *
+ * @param[in] gptp pointer to a @p GPTDriver object
+ * @return The current counter value.
+ *
+ * @notapi
+ */
+gptcnt_t gpt_lld_get_counter(GPTDriver *gptp) {
+
+ gptp->tim->TASKS_CAPTURE[gptp->cc_get] = 1;
+ return gptp->tim->CC[gptp->cc_get];
+}
+
+#endif /* HAL_USE_GPT */
+
+/** @} */
diff --git a/os/hal/ports/NRF51/NRF51822/gpt_lld.h b/os/hal/ports/NRF51/NRF51822/gpt_lld.h new file mode 100644 index 0000000..d707cda --- /dev/null +++ b/os/hal/ports/NRF51/NRF51822/gpt_lld.h @@ -0,0 +1,266 @@ +/*
+ Copyright (C) 2015 Stephen Caudle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file NRF51x22/gpt_lld.h
+ * @brief NRF51x22 GPT subsystem low level driver header.
+ *
+ * @addtogroup GPT
+ * @{
+ */
+
+#ifndef _GPT_LLD_H_
+#define _GPT_LLD_H_
+
+#if HAL_USE_GPT || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief GPTD1 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(NRF51_GPT_USE_TIMER0) || defined(__DOXYGEN__)
+#define NRF51_GPT_USE_TIMER0 FALSE
+#endif
+
+/**
+ * @brief GPTD2 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(NRF51_GPT_USE_TIMER1) || defined(__DOXYGEN__)
+#define NRF51_GPT_USE_TIMER1 FALSE
+#endif
+
+/**
+ * @brief GPTD3 driver enable switch.
+ * @details If set to @p TRUE the support for GPTD3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(NRF51_GPT_USE_TIMER2) || defined(__DOXYGEN__)
+#define NRF51_GPT_USE_TIMER2 FALSE
+#endif
+
+/**
+ * @brief GPTD1 interrupt priority level setting.
+ */
+#if !defined(NRF51_GPT_TIMER0_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF51_GPT_TIMER0_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD2 interrupt priority level setting.
+ */
+#if !defined(NRF51_GPT_TIMER1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF51_GPT_TIMER1_IRQ_PRIORITY 7
+#endif
+
+/**
+ * @brief GPTD3 interrupt priority level setting.
+ */
+#if !defined(NRF51_GPT_TIMER2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define NRF51_GPT_TIMER2_IRQ_PRIORITY 7
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if !NRF51_GPT_USE_TIMER0 && !NRF51_GPT_USE_TIMER1 && \
+ !NRF51_GPT_USE_TIMER2
+#error "GPT driver activated but no TIM peripheral assigned"
+#endif
+
+#if 0
+#if NRF51_GPT_USE_TIMER0 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER0_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIMER0"
+#endif
+
+#if NRF51_GPT_USE_TIMER1 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIMER1"
+#endif
+
+#if NRF51_GPT_USE_TIMER2 && \
+ !OSAL_IRQ_IS_VALID_PRIORITY(NRF51_GPT_TIMER2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to TIMER2"
+#endif
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief GPT frequency type.
+ */
+typedef enum {
+ NRF51_GPT_FREQ_31250HZ = 31250,
+ NRF51_GPT_FREQ_62500HZ = 62500,
+ NRF51_GPT_FREQ_125KHZ = 125000,
+ NRF51_GPT_FREQ_250KHZ = 250000,
+ NRF51_GPT_FREQ_500KHZ = 500000,
+ NRF51_GPT_FREQ_1MHZ = 1000000,
+ NRF51_GPT_FREQ_2MHZ = 2000000,
+ NRF51_GPT_FREQ_4MHZ = 4000000,
+ NRF51_GPT_FREQ_8MHZ = 8000000,
+ NRF51_GPT_FREQ_16MHZ = 16000000,
+} gptfreq_t;
+
+/**
+ * @brief GPT counter type.
+ */
+typedef uint32_t gptcnt_t;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ /**
+ * @brief Timer clock in Hz.
+ * @note The low level can use assertions in order to catch invalid
+ * frequency specifications.
+ */
+ gptfreq_t frequency;
+ /**
+ * @brief Timer callback pointer.
+ * @note This callback is invoked on GPT counter events.
+ * @note This callback can be set to @p NULL but in that case the
+ * one-shot mode cannot be used.
+ */
+ gptcallback_t callback;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief The timer resolution in bits (8/16/24/32)
+ * @note The default value of this field is 16 bits
+ * @note The 24 and 32 bit modes are only valid for TIMER0
+ */
+ uint8_t resolution;
+} GPTConfig;
+
+/**
+ * @brief Structure representing a GPT driver.
+ */
+struct GPTDriver {
+ /**
+ * @brief Driver state.
+ */
+ gptstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const GPTConfig *config;
+#if defined(GPT_DRIVER_EXT_FIELDS)
+ GPT_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the TIMERx registers block.
+ */
+ NRF_TIMER_Type *tim;
+ /**
+ * @brief Index of the TIMERx capture/compare register used for setting the
+ * interval between compare events.
+ */
+ uint8_t cc_int;
+ /**
+ * @brief Index of the TIMERx capture/compare register used for getting the
+ * current timer counter value.
+ */
+ uint8_t cc_get;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Changes the interval of GPT peripheral.
+ * @details This function changes the interval of a running GPT unit.
+ * @pre The GPT unit must be running in continuous mode.
+ * @post The GPT unit interval is changed to the new value.
+ * @note The function has effect at the next cycle start.
+ *
+ * @param[in] gptp pointer to a @p GPTDriver object
+ * @param[in] interval new cycle time in timer ticks
+ *
+ * @notapi
+ */
+#define gpt_lld_change_interval(gptp, interval) \
+ ((gptp)->tim->CC[(gptp)->cc_int] = (uint32_t)((interval) - 1))
+
+/**
+ * @brief Returns the interval of GPT peripheral.
+ * @pre The GPT unit must be running in continuous mode.
+ *
+ * @param[in] gptp pointer to a @p GPTDriver object
+ * @return The current interval.
+ *
+ * @notapi
+ */
+#define gpt_lld_get_interval(gptp) \
+ ((gptcnt_t)((gptp)->tim->CC[(gptp)->cc_int]) + 1)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if NRF51_GPT_USE_TIMER0 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD1;
+#endif
+
+#if NRF51_GPT_USE_TIMER1 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD2;
+#endif
+
+#if NRF51_GPT_USE_TIMER2 && !defined(__DOXYGEN__)
+extern GPTDriver GPTD3;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void gpt_lld_init(void);
+ void gpt_lld_start(GPTDriver *gptp);
+ void gpt_lld_stop(GPTDriver *gptp);
+ void gpt_lld_start_timer(GPTDriver *gptp, gptcnt_t period);
+ void gpt_lld_stop_timer(GPTDriver *gptp);
+ void gpt_lld_polled_delay(GPTDriver *gptp, gptcnt_t interval);
+ gptcnt_t gpt_lld_get_counter(GPTDriver *gptp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_GPT */
+
+#endif /* _GPT_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/ports/NRF51/NRF51822/platform.mk b/os/hal/ports/NRF51/NRF51822/platform.mk index 3fc8342..244a0d1 100644 --- a/os/hal/ports/NRF51/NRF51822/platform.mk +++ b/os/hal/ports/NRF51/NRF51822/platform.mk @@ -8,7 +8,8 @@ PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \ ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/ext_lld_isr.c \ ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/ext_lld.c \ ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/i2c_lld.c \ - ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/adc_lld.c + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/adc_lld.c \ + ${CHIBIOS_CONTRIB}/os/hal/ports/NRF51/NRF51822/gpt_lld.c # Required include directories PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \ diff --git a/testhal/NRF51/NRF51822/GPT/Makefile b/testhal/NRF51/NRF51822/GPT/Makefile new file mode 100644 index 0000000..ec06536 --- /dev/null +++ b/testhal/NRF51/NRF51822/GPT/Makefile @@ -0,0 +1,211 @@ +##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+ USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+ USE_COPT =
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+ USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+ USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+ USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+ USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+ USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+ USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+ USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+ USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+ USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../../../../ChibiOS-RT
+CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
+# Startup files.
+include $(CHIBIOS_CONTRIB)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_nrf51.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS_CONTRIB)/os/hal/ports/NRF51/NRF51822/platform.mk
+include $(CHIBIOS_CONTRIB)/os/hal/boards/WVSHARE_BLE400/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/NRF51822.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+ $(KERNSRC) \
+ $(PORTSRC) \
+ $(OSALSRC) \
+ $(HALSRC) \
+ $(PLATFORMSRC) \
+ $(BOARDSRC) \
+ $(TESTSRC) \
+ main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+# option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+ $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+ $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU = cortex-m0
+
+TRGT = arm-none-eabi-
+CC = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+# runtime support makes code size explode.
+LD = $(TRGT)gcc
+#LD = $(TRGT)g++
+CP = $(TRGT)objcopy
+AS = $(TRGT)gcc -x assembler-with-cpp
+AR = $(TRGT)ar
+OD = $(TRGT)objdump
+SZ = $(TRGT)size
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/testhal/NRF51/NRF51822/GPT/chconf.h b/testhal/NRF51/NRF51822/GPT/chconf.h new file mode 100644 index 0000000..5b0630c --- /dev/null +++ b/testhal/NRF51/NRF51822/GPT/chconf.h @@ -0,0 +1,499 @@ +/*
+ Copyright (C) 2015 Stephen Caudle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 1000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 20
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM FALSE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ * activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE TRUE
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS TRUE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note It is inserted into lock zone.
+ * @note It is also invoked when the threads simply return in order to
+ * terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* _CHCONF_H_ */
+
+/** @} */
diff --git a/testhal/NRF51/NRF51822/GPT/halconf.h b/testhal/NRF51/NRF51822/GPT/halconf.h new file mode 100644 index 0000000..bf63566 --- /dev/null +++ b/testhal/NRF51/NRF51822/GPT/halconf.h @@ -0,0 +1,334 @@ +/*
+ Copyright (C) 2015 Stephen Caudle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC FALSE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT TRUE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C FALSE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 64 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 256
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/testhal/NRF51/NRF51822/GPT/main.c b/testhal/NRF51/NRF51822/GPT/main.c new file mode 100644 index 0000000..3531644 --- /dev/null +++ b/testhal/NRF51/NRF51822/GPT/main.c @@ -0,0 +1,124 @@ +/*
+ Copyright (C) 2015 Stephen Caudle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/*
+ * GPT callback for GPTD2.
+ */
+static void gptcallback1(GPTDriver *gptp) {
+
+ (void)gptp;
+ palTogglePad(IOPORT1, LED1);
+
+ /*
+ * Start a one-shot timer (@ 250ms)
+ */
+ chSysLockFromISR();
+ gptStartOneShotI(&GPTD3, 15625);
+ chSysUnlockFromISR();
+}
+
+/*
+ * GPT callback for GPTD3.
+ */
+static void gptcallback2(GPTDriver *gptp) {
+
+ (void)gptp;
+ palTogglePad(IOPORT1, LED2);
+}
+
+/*
+ * GPT configuration
+ * Frequency: 31250Hz (32us period)
+ * Resolution: 16 bits
+ */
+static const GPTConfig gptcfg1 = {
+ 31250,
+ gptcallback1,
+ 16,
+};
+
+/*
+ * GPT configuration
+ * Frequency: 62500Hz (16us period)
+ * Resolution: 16 bits
+ */
+static const GPTConfig gptcfg2 = {
+ 62500,
+ gptcallback2,
+ 16,
+};
+
+/*
+ * LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+ (void)arg;
+ chRegSetThreadName("blinker");
+ while (true) {
+ palTogglePad(IOPORT1, LED0);
+ chThdSleepMilliseconds(500);
+ }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ /*
+ * Creates the blinker thread.
+ */
+ chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+ /*
+ * Sets up the GPT timers
+ */
+ gptStart(&GPTD2, &gptcfg1);
+ gptStart(&GPTD3, &gptcfg2);
+
+ /*
+ * Start a continuous timer
+ */
+ gptStartContinuous(&GPTD2, 15625);
+
+ /*
+ * Normal main() thread activity, in this demo it does nothing.
+ */
+ while (true) {
+ if (palReadPad(IOPORT1, KEY1) == 0) {
+ gptStopTimer(&GPTD2);
+ gptStop(&GPTD2);
+ gptStopTimer(&GPTD3);
+ gptStop(&GPTD3);
+ }
+ chThdSleepMilliseconds(500);
+ }
+}
diff --git a/testhal/NRF51/NRF51822/GPT/mcuconf.h b/testhal/NRF51/NRF51822/GPT/mcuconf.h new file mode 100644 index 0000000..7fd549f --- /dev/null +++ b/testhal/NRF51/NRF51822/GPT/mcuconf.h @@ -0,0 +1,26 @@ +/*
+ Copyright (C) 2015 Stephen Caudle
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * NRF51 driver system settings.
+ */
+#define NRF51_GPT_USE_TIMER1 TRUE
+#define NRF51_GPT_USE_TIMER2 TRUE
+
+#endif /* _MCUCONF_H_ */
diff --git a/testhal/NRF51/NRF51822/GPT/readme.txt b/testhal/NRF51/NRF51822/GPT/readme.txt new file mode 100644 index 0000000..da5f977 --- /dev/null +++ b/testhal/NRF51/NRF51822/GPT/readme.txt @@ -0,0 +1,19 @@ +*****************************************************************************
+** ChibiOS/HAL - GPT driver demo for NRF51x22. **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Waveshare BLE400 board.
+
+** The Demo **
+
+The application demonstrates the use of the NRF51x22 GPT driver.
+
+** Board Setup **
+
+** Build Procedure **
+
+The demo has been tested using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
|