Adding script to update various config files automaticaly.

5 files changed, 340 insertions, 1 deletions

diff --git a/tools/mx2board.py b/tools/mx2board.py
index ea0b010..642a934 100644
--- a/tools/mx2board.py
+++ b/tools/mx2board.py
@@ -332,7 +332,7 @@ if __name__ == '__main__':
     defines = gen_defines(proj)
     ports = gen_ports(gpio, proj)
 
-    with open(cur_path + '/board_gpio.tpl', 'r') as tpl_file:
+    with open(cur_path + '/templates/board_gpio.tpl', 'r') as tpl_file:
         tpl = tpl_file.read()
     template = Template(tpl)
 
diff --git a/tools/board_gpio.tpl b/tools/templates/board_gpio.tpl
index 07a316d..07a316d 100644
--- a/tools/board_gpio.tpl
+++ b/tools/templates/board_gpio.tpl
diff --git a/tools/templates/halconf_community.h b/tools/templates/halconf_community.h
new file mode 100644
index 0000000..bed1ac8
--- /dev/null
+++ b/tools/templates/halconf_community.h
@@ -0,0 +1,134 @@
+/*

+    ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+#ifndef HALCONF_COMMUNITY_H

+#define HALCONF_COMMUNITY_H

+

+/**

+ * @brief   Enables the community overlay.

+ */

+#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__)

+#define HAL_USE_COMMUNITY           TRUE

+#endif

+

+/**

+ * @brief   Enables the FSMC subsystem.

+ */

+#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__)

+#define HAL_USE_FSMC                FALSE

+#endif

+

+/**

+ * @brief   Enables the NAND subsystem.

+ */

+#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__)

+#define HAL_USE_NAND                FALSE

+#endif

+

+/**

+ * @brief   Enables the 1-wire subsystem.

+ */

+#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__)

+#define HAL_USE_ONEWIRE             FALSE

+#endif

+

+/**

+ * @brief   Enables the EICU subsystem.

+ */

+#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__)

+#define HAL_USE_EICU                FALSE

+#endif

+

+/**

+ * @brief   Enables the CRC subsystem.

+ */

+#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__)

+#define HAL_USE_CRC                 FALSE

+#endif

+

+/**

+ * @brief   Enables the RNG subsystem.

+ */

+#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__)

+#define HAL_USE_RNG                 FALSE

+#endif

+

+/**

+ * @brief   Enables the EEPROM subsystem.

+ */

+#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)

+#define HAL_USE_EEPROM              FALSE

+#endif

+

+/**

+ * @brief   Enables the TIMCAP subsystem.

+ */

+#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)

+#define HAL_USE_TIMCAP              FALSE

+#endif

+

+/**

+ * @brief   Enables the TIMCAP subsystem.

+ */

+#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)

+#define HAL_USE_COMP              FALSE

+#endif

+

+/*===========================================================================*/

+/* FSMCNAND driver related settings.                                         */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs.

+ * @note    Disabling this option saves both code and data space.

+ */

+#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)

+#define NAND_USE_MUTUAL_EXCLUSION   TRUE

+#endif

+

+/*===========================================================================*/

+/* 1-wire driver related settings.                                           */

+/*===========================================================================*/

+/**

+ * @brief   Enables strong pull up feature.

+ * @note    Disabling this option saves both code and data space.

+ */

+#define ONEWIRE_USE_STRONG_PULLUP   FALSE

+

+/**

+ * @brief   Enables search ROM feature.

+ * @note    Disabling this option saves both code and data space.

+ */

+#define ONEWIRE_USE_SEARCH_ROM      FALSE

+

+/*===========================================================================*/

+/* EEProm driver related settings.                                           */

+/*===========================================================================*/

+

+/**

+ * @brief   Enables 24xx series I2C eeprom device driver.

+ * @note    Disabling this option saves both code and data space.

+ */

+#define EEPROM_USE_EE24XX FALSE

+ /**

+ * @brief   Enables 25xx series SPI eeprom device driver.

+ * @note    Disabling this option saves both code and data space.

+ */

+#define EEPROM_USE_EE25XX FALSE

+

+#endif /* HALCONF_COMMUNITY_H */

+

+/** @} */

diff --git a/tools/templates/mcuconf_community.h b/tools/templates/mcuconf_community.h
new file mode 100644
index 0000000..6530c12
--- /dev/null
+++ b/tools/templates/mcuconf_community.h
@@ -0,0 +1,105 @@
+/*
+    ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * FSMC driver system settings.
+ */
+#define STM32_FSMC_USE_FSMC1                FALSE
+#define STM32_FSMC_FSMC1_IRQ_PRIORITY       10
+
+/*
+ * FSMC NAND driver system settings.
+ */
+#define STM32_NAND_USE_FSMC_NAND1           FALSE
+#define STM32_NAND_USE_FSMC_NAND2           FALSE
+#define STM32_NAND_USE_EXT_INT              FALSE
+#define STM32_NAND_DMA_STREAM               STM32_DMA_STREAM_ID(2, 7)
+#define STM32_NAND_DMA_PRIORITY             0
+#define STM32_NAND_DMA_ERROR_HOOK(nandp)    osalSysHalt("DMA failure")
+
+/*
+ * FSMC SRAM driver system settings.
+ */
+#define STM32_USE_FSMC_SRAM                 FALSE
+#define STM32_SRAM_USE_FSMC_SRAM1           FALSE
+#define STM32_SRAM_USE_FSMC_SRAM2           FALSE
+#define STM32_SRAM_USE_FSMC_SRAM3           FALSE
+#define STM32_SRAM_USE_FSMC_SRAM4           FALSE
+
+/*
+ * FSMC SDRAM driver system settings.
+ */
+#define STM32_USE_FSMC_SDRAM                FALSE
+
+/*
+ * TIMCAP driver system settings.
+ */
+#define STM32_TIMCAP_USE_TIM1                  FALSE
+#define STM32_TIMCAP_USE_TIM2                  FALSE
+#define STM32_TIMCAP_USE_TIM3                  FALSE
+#define STM32_TIMCAP_USE_TIM4                  FALSE
+#define STM32_TIMCAP_USE_TIM5                  FALSE
+#define STM32_TIMCAP_USE_TIM8                  FALSE
+#define STM32_TIMCAP_USE_TIM9                  FALSE
+#define STM32_TIMCAP_TIM1_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM2_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM3_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM4_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM5_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM8_IRQ_PRIORITY         3
+#define STM32_TIMCAP_TIM9_IRQ_PRIORITY         3
+
+/*
+ * COMP driver system settings.
+ */
+#define STM32_COMP_USE_COMP1                  FALSE
+#define STM32_COMP_USE_COMP2                  FALSE
+#define STM32_COMP_USE_COMP3                  FALSE
+#define STM32_COMP_USE_COMP4                  FALSE
+#define STM32_COMP_USE_COMP5                  FALSE
+#define STM32_COMP_USE_COMP6                  FALSE
+#define STM32_COMP_USE_COMP7                  FALSE
+
+#define STM32_COMP_USE_INTERRUPTS             TRUE
+#define STM32_COMP_1_2_3_IRQ_PRIORITY         5
+#define STM32_COMP_4_5_6_IRQ_PRIORITY         5
+#define STM32_COMP_7_IRQ_PRIORITY             5
+
+#if STM32_COMP_USE_INTERRUPTS
+#define STM32_DISABLE_EXTI21_22_29_HANDLER
+#define STM32_DISABLE_EXTI30_32_HANDLER
+#define STM32_DISABLE_EXTI33_HANDLER
+#endif
+
+/*
+ * USBH driver system settings.
+ */
+#define STM32_OTG1_CHANNELS_NUMBER          8
+#define STM32_OTG2_CHANNELS_NUMBER          12
+
+#define STM32_USBH_USE_OTG1                 1
+#define STM32_OTG1_RXFIFO_SIZE              1024
+#define STM32_OTG1_PTXFIFO_SIZE             128
+#define STM32_OTG1_NPTXFIFO_SIZE            128
+
+#define STM32_USBH_USE_OTG2                 0
+#define STM32_OTG2_RXFIFO_SIZE              2048
+#define STM32_OTG2_PTXFIFO_SIZE             1024
+#define STM32_OTG2_NPTXFIFO_SIZE            1024
+
+#define STM32_USBH_MIN_QSPACE               4
+#define STM32_USBH_CHANNELS_NP              4
+
diff --git a/tools/update_configs.py b/tools/update_configs.py
new file mode 100644
index 0000000..637429e
--- /dev/null
+++ b/tools/update_configs.py
@@ -0,0 +1,100 @@
+#!/usr/bin/python

+# -*- coding: utf-8 -*-

+__author__ = 'Fabien Poussin'

+__version__ = '0.1'

+

+import os

+import re

+from argparse import ArgumentParser

+from traceback import print_exc

+from shutil import copy

+

+parser = ArgumentParser(description='Generate ChibiOS-Contrib config and make files from ChibiOS')

+parser.add_argument('-s', '--src', default='../../ChibiOS-RT', type=str, help="ChibiOS folder")

+parser.add_argument('-d', '--dst', default='..', type=str, help='ChibiOS-Contrib folder')

+

+

+def makefile(lines):

+

+

+    for l in range(len(lines)):

+

+        if 'CHIBIOS =' in lines[l]:

+            lines[l] = lines[l][:-1] + '/../ChibiOS-RT\n'

+            lines.insert(l + 1, 'CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib\n')

+

+        if '$(CHIBIOS)/os/hal/hal.mk' in lines[l] \

+                or '$(CHIBIOS)/os/hal/ports/' in lines[l] \

+                or '$(CHIBIOS)/os/various' in lines[l]            :

+            lines[l] = lines[l].replace('CHIBIOS', 'CHIBIOS_CONTRIB')

+

+    return "".join(lines)

+

+

+def halconf(lines):

+

+    idx_end = lines.index('#endif /* HALCONF_H */\n')

+    lines.insert(idx_end - 1, '\n')

+    lines.insert(idx_end - 1, '#include "halconf_community.h"')

+    lines.insert(idx_end - 1, '\n')

+

+    return "".join(lines)

+

+

+def mcuconf(lines):

+

+    idx_end = lines.index('#endif /* MCUCONF_H */\n')

+    lines.insert(idx_end - 1, '\n')

+    lines.insert(idx_end - 1, '#include "mcuconf_community.h"')

+    lines.insert(idx_end - 1, '\n')

+

+    return "".join(lines)

+

+

+if __name__ == '__main__':

+

+    args = parser.parse_args()

+    sources = {}

+

+    for family in os.scandir(args.src + '/testhal/STM32/'):

+        if not family.name[0].isupper() or not family.is_dir():

+            continue

+

+        for test in os.scandir(family.path):

+            try:

+                sources[family.name] = {'makefile': None, 'halconf': None, 'mcuconf': None}

+

+                with open(test.path + '/Makefile', 'r') as file:

+                    sources[family.name]['makefile'] = makefile(file.readlines())

+

+                with open(test.path + '/halconf.h', 'r') as file:

+                    sources[family.name]['halconf'] = halconf(file.readlines())

+

+                with open(test.path + '/mcuconf.h', 'r') as file:

+                    sources[family.name]['mcuconf'] = mcuconf(file.readlines())

+

+            except Exception as e:

+                print(test.path, e)

+                del sources[family.name]

+                continue

+

+            break

+

+    print(sources.keys())

+

+    for family in os.scandir(args.dst + '/testhal/STM32/'):

+        if not family.name[0].isupper() or not family.is_dir():

+            continue

+

+        for test in os.scandir(family.path):

+            copy('templates/halconf_community.h', test.path)

+            copy('templates/mcuconf_community.h', test.path)

+

+            with open(test.path + '/Makefile', 'w') as file:

+                file.write(sources[family.name]['makefile'])

+

+            with open(test.path + '/halconf.h', 'w') as file:

+                file.write(sources[family.name]['halconf'])

+

+            with open(test.path + '/mcuconf.h', 'w') as file:

+                file.write(sources[family.name]['mcuconf'])