Moved pal testhal makefiles and configuration into folders

5 files changed, 0 insertions, 1302 deletions

diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/chconf.h b/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/chconf.h
deleted file mode 100644
index 3209f1d..0000000
--- a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/chconf.h
+++ /dev/null
@@ -1,608 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_5_0_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION                32
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY                 10000
-
-/**
- * @brief   Time intervals data size.
- * @note    Allowed values are 16, 32 or 64 bits.
- */
-#define CH_CFG_INTERVALS_SIZE               32
-
-/**
- * @brief   Time types data size.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_TIME_TYPES_SIZE              32
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#define CH_CFG_ST_TIMEDELTA                 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM                 0
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE                 0
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_TM                       TRUE
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY                 TRUE
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT                 TRUE
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES               TRUE
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES                  TRUE
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS                 TRUE
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS                   TRUE
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES                 TRUE
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES                TRUE
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE                  TRUE
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP                     TRUE
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-
-/**
- * @brief  Objects FIFOs APIs.
- * @details If enabled then the objects FIFOs APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_OBJ_FIFOS                TRUE
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC                  TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Objects factory options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Objects Factory APIs.
- * @details If enabled then the objects factory APIs are included in the
- *          kernel.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_CFG_USE_FACTORY                  TRUE
-
-/**
- * @brief   Maximum length for object names.
- * @details If the specified length is zero then the name is stored by
- *          pointer but this could have unintended side effects.
- */
-#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
-
-/**
- * @brief   Enables the registry of generic objects.
- */
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
-
-/**
- * @brief   Enables factory for generic buffers.
- */
-#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
-
-/**
- * @brief   Enables factory for semaphores.
- */
-#define CH_CFG_FACTORY_SEMAPHORES           TRUE
-
-/**
- * @brief   Enables factory for mailboxes.
- */
-#define CH_CFG_FACTORY_MAILBOXES            TRUE
-
-/**
- * @brief   Enables factory for objects FIFOs.
- */
-#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS                   FALSE
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS                TRUE
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS               TRUE
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_ALL
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK           TRUE
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS                 TRUE
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING            FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System structure extension.
- * @details User fields added to the end of the @p ch_system_t structure.
- */
-#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   System initialization hook.
- * @details User initialization code added to the @p chSysInit() function
- *          just before interrupts are enabled globally.
- */
-#define CH_CFG_SYSTEM_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p _thread_init() function.
- *
- * @note    It is invoked from within @p _thread_init() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */
diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/halconf.h b/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/halconf.h
deleted file mode 100644
index 97f1ec3..0000000
--- a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/halconf.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
-#endif
-
-/**
- * @brief   Enables the cryptographic subsystem.
- */
-#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY                 FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
-#endif
-
-/**
- * @brief   Enables the QSPI subsystem.
- */
-#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
-#define HAL_USE_QSPI                FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 FALSE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
-#endif
-
-/*===========================================================================*/
-/* CRY driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the SW fall-back of the cryptographic driver.
- * @details When enabled, this option, activates a fall-back software
- *          implementation for algorithms not supported by the underlying
- *          hardware.
- * @note    Fall-back implementations may not be present for all algorithms.
- */
-#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_USE_FALLBACK                FALSE
-#endif
-
-/**
- * @brief   Makes the driver forcibly use the fall-back implementations.
- */
-#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_ENFORCE_FALLBACK            FALSE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY           FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS              TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY              100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT             FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE      38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 16 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE         16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 256 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE     256
-#endif
-
-/**
- * @brief   Serial over USB number of buffers.
- * @note    The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER   2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT               FALSE
-#endif
-
-/**
- * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION   FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                FALSE
-#endif
-
-#endif /* HALCONF_H */
-
-/** @} */
diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/mcuconf.h b/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/mcuconf.h
deleted file mode 100644
index 578d4ab..0000000
--- a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/mcuconf.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
-    Copyright (C) 2014..2017 Marco Veeneman
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * TM4C129x drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 7...0       Lowest...Highest.
- */
-
-#define TM4C129x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define TIVA_MOSC_SINGLE_ENDED              FALSE
-#define TIVA_RSCLKCFG_OSCSRC                SYSCTL_RSCLKCFG_OSCSRC_MOSC
-
-/*
- * PAL driver system settings.
- */
-#define TIVA_PAL_GPIOA_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOB_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOC_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOD_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOE_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOF_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOG_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOH_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOJ_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOK_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOL_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOM_IRQ_PRIORITY         3
-#define TIVA_PAL_GPION_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOP0_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOP1_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOP2_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOP3_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOP4_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOP5_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOP6_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOP7_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOQ0_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOQ1_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOQ2_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOQ3_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOQ4_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOQ5_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOQ6_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOQ7_IRQ_PRIORITY        3
-#define TIVA_PAL_GPIOR_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOS_IRQ_PRIORITY         3
-#define TIVA_PAL_GPIOT_IRQ_PRIORITY         3
-
-/*
- * GPT driver system settings.
- */
-#define TIVA_GPT_USE_GPT0                   FALSE
-#define TIVA_GPT_USE_GPT1                   FALSE
-#define TIVA_GPT_USE_GPT2                   FALSE
-#define TIVA_GPT_USE_GPT3                   FALSE
-#define TIVA_GPT_USE_GPT4                   FALSE
-#define TIVA_GPT_USE_GPT5                   FALSE
-#define TIVA_GPT_USE_GPT6                   FALSE
-#define TIVA_GPT_USE_GPT7                   FALSE
-#define TIVA_GPT_GPT0A_IRQ_PRIORITY         7
-#define TIVA_GPT_GPT1A_IRQ_PRIORITY         7
-#define TIVA_GPT_GPT2A_IRQ_PRIORITY         7
-#define TIVA_GPT_GPT3A_IRQ_PRIORITY         7
-#define TIVA_GPT_GPT4A_IRQ_PRIORITY         7
-#define TIVA_GPT_GPT5A_IRQ_PRIORITY         7
-#define TIVA_GPT_GPT6A_IRQ_PRIORITY         7
-#define TIVA_GPT_GPT7A_IRQ_PRIORITY         7
-
-/*
- * I2C driver system settings.
- */
-#define TIVA_I2C_USE_I2C0                   FALSE
-#define TIVA_I2C_USE_I2C1                   FALSE
-#define TIVA_I2C_USE_I2C2                   FALSE
-#define TIVA_I2C_USE_I2C3                   FALSE
-#define TIVA_I2C_USE_I2C4                   FALSE
-#define TIVA_I2C_USE_I2C5                   FALSE
-#define TIVA_I2C_USE_I2C6                   FALSE
-#define TIVA_I2C_USE_I2C7                   FALSE
-#define TIVA_I2C_USE_I2C8                   FALSE
-#define TIVA_I2C_USE_I2C9                   FALSE
-#define TIVA_I2C_I2C0_IRQ_PRIORITY          4
-#define TIVA_I2C_I2C1_IRQ_PRIORITY          4
-#define TIVA_I2C_I2C2_IRQ_PRIORITY          4
-#define TIVA_I2C_I2C3_IRQ_PRIORITY          4
-#define TIVA_I2C_I2C4_IRQ_PRIORITY          4
-#define TIVA_I2C_I2C5_IRQ_PRIORITY          4
-#define TIVA_I2C_I2C6_IRQ_PRIORITY          4
-#define TIVA_I2C_I2C7_IRQ_PRIORITY          4
-#define TIVA_I2C_I2C8_IRQ_PRIORITY          4
-#define TIVA_I2C_I2C9_IRQ_PRIORITY          4
-
-/*
- * PWM driver system settings.
- */
-#define TIVA_PWM_USE_PWM0                   FALSE
-#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY    4
-#define TIVA_PWM_PWM0_0_IRQ_PRIORITY        4
-#define TIVA_PWM_PWM0_1_IRQ_PRIORITY        4
-#define TIVA_PWM_PWM0_2_IRQ_PRIORITY        4
-#define TIVA_PWM_PWM0_3_IRQ_PRIORITY        4
-
-/*
- * SERIAL driver system settings.
- */
-#define TIVA_SERIAL_USE_UART0               FALSE
-#define TIVA_SERIAL_USE_UART1               FALSE
-#define TIVA_SERIAL_USE_UART2               FALSE
-#define TIVA_SERIAL_USE_UART3               FALSE
-#define TIVA_SERIAL_USE_UART4               FALSE
-#define TIVA_SERIAL_USE_UART5               FALSE
-#define TIVA_SERIAL_USE_UART6               FALSE
-#define TIVA_SERIAL_USE_UART7               FALSE
-#define TIVA_SERIAL_UART0_PRIORITY          5
-#define TIVA_SERIAL_UART1_PRIORITY          5
-#define TIVA_SERIAL_UART2_PRIORITY          5
-#define TIVA_SERIAL_UART3_PRIORITY          5
-#define TIVA_SERIAL_UART4_PRIORITY          5
-#define TIVA_SERIAL_UART5_PRIORITY          5
-#define TIVA_SERIAL_UART6_PRIORITY          5
-#define TIVA_SERIAL_UART7_PRIORITY          5
-
-/*
- * ST driver system settings.
- */
-#define TIVA_ST_IRQ_PRIORITY                2
-#define TIVA_ST_USE_WIDE_TIMER              FALSE
-#define TIVA_ST_TIMER_NUMBER                5
-#define TIVA_ST_TIMER_LETTER                A
diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.c b/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.c
deleted file mode 100644
index c153bd7..0000000
--- a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    portab.c
- * @brief   Application portability module code.
- *
- * @addtogroup application_portability
- * @{
- */
-
-#include "portab.h"
-
-/*===========================================================================*/
-/* Module local definitions.                                                 */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module exported variables.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module local types.                                                       */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module local variables.                                                   */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module local functions.                                                   */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module exported functions.                                                */
-/*===========================================================================*/
-
-/** @} */
diff --git a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.h b/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.h
deleted file mode 100644
index 79ae8ec..0000000
--- a/testhal/TIVA/multi/PAL/cfg-tm4c1294_launchpad/portab.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    portab.h
- * @brief   Application portability macros and structures.
- *
- * @addtogroup application_portability
- * @{
- */
-
-#ifndef PORTAB_H
-#define PORTAB_H
-
-/*===========================================================================*/
-/* Module constants.                                                         */
-/*===========================================================================*/
-
-#define PORTAB_LINE_LED1            LINE_LED0
-#define PORTAB_LINE_LED2            LINE_LED1
-#define PORTAB_LED_OFF              PAL_HIGH
-#define PORTAB_LED_ON               PAL_LOW
-
-#define PORTAB_LINE_BUTTON          LINE_SW1
-#define PORTAB_BUTTON_PRESSED       PAL_LOW
-
-/*===========================================================================*/
-/* Module pre-compile time settings.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks.                                       */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module data structures and types.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Module macros.                                                            */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* External declarations.                                                    */
-/*===========================================================================*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-/*===========================================================================*/
-/* Module inline functions.                                                  */
-/*===========================================================================*/
-
-#endif /* PORTAB_H */
-
-/** @} */