Reorganize NRF5x driver files.

1 files changed, 0 insertions, 351 deletions

diff --git a/os/hal/ports/NRF5/LLD/hal_pal_lld.h b/os/hal/ports/NRF5/LLD/hal_pal_lld.h
deleted file mode 100644
index 745afd3..0000000
--- a/os/hal/ports/NRF5/LLD/hal_pal_lld.h
+++ /dev/null
@@ -1,351 +0,0 @@
-/*

-    Copyright (C) 2015 Fabio Utzig

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-/**

- * @file    NRF5/LLD/hal_pal_lld.h

- * @brief   NRF5 PAL subsystem low level driver header.

- *

- * @addtogroup PAL

- * @{

- */

-

-#ifndef HAL_PAL_LLD_H

-#define HAL_PAL_LLD_H

-

-#if (HAL_USE_PAL == TRUE) || defined(__DOXYGEN__)

-

-/*===========================================================================*/

-/* Unsupported modes and specific modes                                      */

-/*===========================================================================*/

-

-/*===========================================================================*/

-/* I/O Ports Types and constants.                                            */

-/*===========================================================================*/

-

-#define TOTAL_GPIO_PADS 32

-

-/**

- * @name    Port related definitions

- * @{

- */

-/**

- * @brief   Width, in bits, of an I/O port.

- */

-#define PAL_IOPORTS_WIDTH 32U

-

-/**

- * @brief   Whole port mask.

- * @brief   This macro specifies all the valid bits into a port.

- */

-#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFFFFFFU)

-/** @} */

-

-/**

- * @name    Line handling macros

- * @{

- */

-/**

- * @brief   Forms a line identifier.

- * @details A port/pad pair are encoded into an @p ioline_t type. The encoding

- *          of this type is platform-dependent.

- */

-#define PAL_LINE(port, pad)                                                 \

-  ((ioline_t)((uint32_t)(pad)))

-

-/**

- * @brief   Decodes a port identifier from a line identifier.

- */

-#define PAL_PORT(line)                                                      \

-  ((ioportid_t)(IOPORT1))

-

-/**

- * @brief   Decodes a pad identifier from a line identifier.

- */

-#define PAL_PAD(line)                                                       \

-  ((uint32_t)(line))

-

-/**

- * @brief   Value identifying an invalid line.

- */

-#define PAL_NOLINE              ((ioline_t)-1)

-/** @} */

-

-/**

- * @brief   Generic I/O ports static initializer.

- * @details An instance of this structure must be passed to @p palInit() at

- *          system startup time in order to initialized the digital I/O

- *          subsystem. This represents only the initial setup, specific pads

- *          or whole ports can be reprogrammed at later time.

- * @note    Implementations may extend this structure to contain more,

- *          architecture dependent, fields.

- */

-typedef struct {

-  uint32_t pads[TOTAL_GPIO_PADS];

-} PALConfig;

-

-/**

- * @brief   Digital I/O port sized unsigned type.

- */

-typedef uint32_t ioportmask_t;

-

-/**

- * @brief   Digital I/O modes.

- */

-typedef uint8_t iomode_t;

-

-/**

- * @brief   Type of an I/O line.

- */

-typedef uint32_t ioline_t;

-

-/**

- * @brief   Port Identifier.

- * @details This type can be a scalar or some kind of pointer, do not make

- *          any assumption about it, use the provided macros when populating

- *          variables of this type.

- */

-typedef NRF_GPIO_Type *ioportid_t;

-

-/*===========================================================================*/

-/* I/O Ports Identifiers.                                                    */

-/*===========================================================================*/

-

-/**

- * @brief   First I/O port identifier.

- * @details Low level drivers can define multiple ports, it is suggested to

- *          use this naming convention.

- */

-#if   NRF_SERIES == 51

-#define IOPORT1         NRF_GPIO

-#else

-#define IOPORT1         NRF_P0

-#endif

-

-/*===========================================================================*/

-/* Implementation, some of the following macros could be implemented as      */

-/* functions, if so please put them in pal_lld.c.                            */

-/*===========================================================================*/

-

-/**

- * @brief   Low level PAL subsystem initialization.

- *

- * @param[in] config    architecture-dependent ports configuration

- *

- * @notapi

- */

-#define pal_lld_init(config) _pal_lld_init(config)

-

-/**

- * @brief   Reads the physical I/O port states.

- *

- * @param[in] port      port identifier

- * @return              The port bits.

- *

- * @notapi

- */

-#define pal_lld_readport(port) (IOPORT1->IN)

-

-/**

- * @brief   Reads the output latch.

- * @details The purpose of this function is to read back the latched output

- *          value.

- *

- * @param[in] port      port identifier

- * @return              The latched logical states.

- *

- * @notapi

- */

-#define pal_lld_readlatch(port) (IOPORT1->OUT)

-

-/**

- * @brief   Writes a bits mask on a I/O port.

- *

- * @param[in] port      port identifier

- * @param[in] bits      bits to be written on the specified port

- *

- * @notapi

- */

-#define pal_lld_writeport(port, bits) (IOPORT1->OUT = (bits))

-

-/**

- * @brief   Sets a bits mask on a I/O port.

- * @note    The @ref PAL provides a default software implementation of this

- *          functionality, implement this function if can optimize it by using

- *          special hardware functionalities or special coding.

- *

- * @param[in] port      port identifier

- * @param[in] bits      bits to be ORed on the specified port

- *

- * @notapi

- */

-#define pal_lld_setport(port, bits) (IOPORT1->OUTSET = (bits))

-

-

-/**

- * @brief   Clears a bits mask on a I/O port.

- * @note    The @ref PAL provides a default software implementation of this

- *          functionality, implement this function if can optimize it by using

- *          special hardware functionalities or special coding.

- *

- * @param[in] port      port identifier

- * @param[in] bits      bits to be cleared on the specified port

- *

- * @notapi

- */

-#define pal_lld_clearport(port, bits) (IOPORT1->OUTCLR = (bits))

-

-/**

- * @brief   Pads group mode setup.

- * @details This function programs a pads group belonging to the same port

- *          with the specified mode.

- * @note    Programming an unknown or unsupported mode is silently ignored.

- *

- * @param[in] port      port identifier

- * @param[in] mask      group mask

- * @param[in] offset    group bit offset within the port

- * @param[in] mode      group mode

- *

- * @notapi

- */

-#define pal_lld_setgroupmode(port, mask, offset, mode)                      \

-  _pal_lld_setgroupmode(port, mask << offset, mode)

-

-/**

- * @brief   Reads a logical state from an I/O pad.

- * @note    The @ref PAL provides a default software implementation of this

- *          functionality, implement this function if can optimize it by using

- *          special hardware functionalities or special coding.

- *

- * @param[in] port      port identifier

- * @param[in] pad       pad number within the port

- * @return              The logical state.

- * @retval PAL_LOW      low logical state.

- * @retval PAL_HIGH     high logical state.

- *

- * @notapi

- */

-#define pal_lld_readpad(port, pad)                                          \

-  ((IOPORT1->IN & ((uint32_t) 1 << pad)) ? PAL_HIGH : PAL_LOW)

-

-/**

- * @brief   Writes a logical state on an output pad.

- * @note    This function is not meant to be invoked directly by the

- *          application  code.

- * @note    The @ref PAL provides a default software implementation of this

- *          functionality, implement this function if can optimize it by using

- *          special hardware functionalities or special coding.

- *

- * @param[in] port      port identifier

- * @param[in] pad       pad number within the port

- * @param[in] bit       logical value, the value must be @p PAL_LOW or

- *                      @p PAL_HIGH

- *

- * @notapi

- */

-#define pal_lld_writepad(port, pad, bit)                                    \

-  do {                                                                      \

-    (void)port;                                                             \

-    if (bit == PAL_HIGH)                                                    \

-      IOPORT1->OUTSET = ((uint32_t) 1 << pad);                              \

-    else                                                                    \

-      IOPORT1->OUTCLR = ((uint32_t) 1 << pad);                              \

-  } while (false)

-

-/**

- * @brief   Sets a pad logical state to @p PAL_HIGH.

- * @note    The @ref PAL provides a default software implementation of this

- *          functionality, implement this function if can optimize it by using

- *          special hardware functionalities or special coding.

- *

- * @param[in] port      port identifier

- * @param[in] pad       pad number within the port

- *

- * @notapi

- */

-#define pal_lld_setpad(port, pad) (IOPORT1->OUTSET = (uint32_t) 1 << (pad))

-

-/**

- * @brief   Clears a pad logical state to @p PAL_LOW.

- * @note    The @ref PAL provides a default software implementation of this

- *          functionality, implement this function if can optimize it by using

- *          special hardware functionalities or special coding.

- *

- * @param[in] port      port identifier

- * @param[in] pad       pad number within the port

- *

- * @notapi

- */

-#define pal_lld_clearpad(port, pad) (IOPORT1->OUTCLR = (uint32_t) 1 << (pad))

-

-/**

- * @brief   Toggles a pad logical state.

- * @note    The @ref PAL provides a default software implementation of this

- *          functionality, implement this function if can optimize it by using

- *          special hardware functionalities or special coding.

- *

- * @param[in] port      port identifier

- * @param[in] pad       pad number within the port

- *

- * @notapi

- */

-#define pal_lld_togglepad(port, pad)                                        \

-  do {                                                                      \

-    uint8_t bit = (IOPORT1->OUT >> (pad)) & 1;                              \

-    if (bit)                                                                \

-      IOPORT1->OUTCLR = 1 << (pad);                                         \

-    else                                                                    \

-      IOPORT1->OUTSET = 1 << (pad);                                         \

-  } while (0)

-

-/**

- * @brief   Pad mode setup.

- * @details This function programs a pad with the specified mode.

- * @note    The @ref PAL provides a default software implementation of this

- *          functionality, implement this function if can optimize it by using

- *          special hardware functionalities or special coding.

- * @note    Programming an unknown or unsupported mode is silently ignored.

- *

- * @param[in] port      port identifier

- * @param[in] pad       pad number within the port

- * @param[in] mode      pad mode

- *

- * @notapi

- */

-#define pal_lld_setpadmode(port, pad, mode) _pal_lld_setpadmode(port, pad, mode)

-

-#if !defined(__DOXYGEN__)

-extern const PALConfig pal_default_config;

-#endif

-

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void _pal_lld_init(const PALConfig *config);

-  void _pal_lld_setgroupmode(ioportid_t port,

-                             ioportmask_t mask,

-                             iomode_t mode);

-  void _pal_lld_setpadmode(ioportid_t port,

-                           uint8_t pad,

-                           iomode_t mode);

-#ifdef __cplusplus

-}

-#endif

-

-#endif /* HAL_USE_PAL == TRUE */

-

-#endif /* HAL_PAL_LLD_H */

-

-/** @} */