TriBuf demos updated and working

4 files changed, 833 insertions, 817 deletions

diff --git a/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h b/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h
index 8411dcd..a03c007 100644
--- a/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h
+++ b/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h
@@ -1,501 +1,501 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION                32
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY                 1000
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#define CH_CFG_ST_TIMEDELTA                 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM                 0
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE                 0
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_TM                       TRUE
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY                 TRUE
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT                 TRUE
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES               TRUE
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES                  TRUE
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS                 TRUE
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS                   TRUE
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES                 TRUE
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES                TRUE
-
-/**
- * @brief   I/O Queues APIs.
- * @details If enabled then the I/O queues APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_QUEUES                   TRUE
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE                  TRUE
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP                     TRUE
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC                  TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS                   TRUE
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS                TRUE
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS               TRUE
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- *          activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_TRACE                 TRUE
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK           TRUE
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS                 TRUE
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING            TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- *
- * @note    It is inserted into lock zone.
- * @note    It is also invoked when the threads simply return in order to
- *          terminate.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#define TRIBUF_USE_WAIT     TRUE
-
-#endif  /* _CHCONF_H_ */
-
-/** @} */
+/*

+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+/**

+ * @file    templates/chconf.h

+ * @brief   Configuration file template.

+ * @details A copy of this file must be placed in each project directory, it

+ *          contains the application specific kernel settings.

+ *

+ * @addtogroup config

+ * @details Kernel related settings and hooks.

+ * @{

+ */

+

+#ifndef _CHCONF_H_

+#define _CHCONF_H_

+

+/*===========================================================================*/

+/**

+ * @name System timers settings

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   System time counter resolution.

+ * @note    Allowed values are 16 or 32 bits.

+ */

+#define CH_CFG_ST_RESOLUTION                32

+

+/**

+ * @brief   System tick frequency.

+ * @details Frequency of the system timer that drives the system ticks. This

+ *          setting also defines the system tick time unit.

+ */

+#define CH_CFG_ST_FREQUENCY                 1000

+

+/**

+ * @brief   Time delta constant for the tick-less mode.

+ * @note    If this value is zero then the system uses the classic

+ *          periodic tick. This value represents the minimum number

+ *          of ticks that is safe to specify in a timeout directive.

+ *          The value one is not valid, timeouts are rounded up to

+ *          this value.

+ */

+#define CH_CFG_ST_TIMEDELTA                 0

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Kernel parameters and options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Round robin interval.

+ * @details This constant is the number of system ticks allowed for the

+ *          threads before preemption occurs. Setting this value to zero

+ *          disables the preemption for threads with equal priority and the

+ *          round robin becomes cooperative. Note that higher priority

+ *          threads can still preempt, the kernel is always preemptive.

+ * @note    Disabling the round robin preemption makes the kernel more compact

+ *          and generally faster.

+ * @note    The round robin preemption is not supported in tickless mode and

+ *          must be set to zero in that case.

+ */

+#define CH_CFG_TIME_QUANTUM                 0

+

+/**

+ * @brief   Managed RAM size.

+ * @details Size of the RAM area to be managed by the OS. If set to zero

+ *          then the whole available RAM is used. The core memory is made

+ *          available to the heap allocator and/or can be used directly through

+ *          the simplified core memory allocator.

+ *

+ * @note    In order to let the OS manage the whole RAM the linker script must

+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.

+ * @note    Requires @p CH_CFG_USE_MEMCORE.

+ */

+#define CH_CFG_MEMCORE_SIZE                 0

+

+/**

+ * @brief   Idle thread automatic spawn suppression.

+ * @details When this option is activated the function @p chSysInit()

+ *          does not spawn the idle thread. The application @p main()

+ *          function becomes the idle thread and must implement an

+ *          infinite loop.

+ */

+#define CH_CFG_NO_IDLE_THREAD               FALSE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Performance options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   OS optimization.

+ * @details If enabled then time efficient rather than space efficient code

+ *          is used when two possible implementations exist.

+ *

+ * @note    This is not related to the compiler optimization options.

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_OPTIMIZE_SPEED               TRUE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Subsystem options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Time Measurement APIs.

+ * @details If enabled then the time measurement APIs are included in

+ *          the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_TM                       TRUE

+

+/**

+ * @brief   Threads registry APIs.

+ * @details If enabled then the registry APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_REGISTRY                 TRUE

+

+/**

+ * @brief   Threads synchronization APIs.

+ * @details If enabled then the @p chThdWait() function is included in

+ *          the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_WAITEXIT                 TRUE

+

+/**

+ * @brief   Semaphores APIs.

+ * @details If enabled then the Semaphores APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_SEMAPHORES               TRUE

+

+/**

+ * @brief   Semaphores queuing mode.

+ * @details If enabled then the threads are enqueued on semaphores by

+ *          priority rather than in FIFO order.

+ *

+ * @note    The default is @p FALSE. Enable this if you have special

+ *          requirements.

+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.

+ */

+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE

+

+/**

+ * @brief   Mutexes APIs.

+ * @details If enabled then the mutexes APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MUTEXES                  FALSE

+

+/**

+ * @brief   Enables recursive behavior on mutexes.

+ * @note    Recursive mutexes are heavier and have an increased

+ *          memory footprint.

+ *

+ * @note    The default is @p FALSE.

+ * @note    Requires @p CH_CFG_USE_MUTEXES.

+ */

+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE

+

+/**

+ * @brief   Conditional Variables APIs.

+ * @details If enabled then the conditional variables APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_MUTEXES.

+ */

+#define CH_CFG_USE_CONDVARS                 FALSE

+

+/**

+ * @brief   Conditional Variables APIs with timeout.

+ * @details If enabled then the conditional variables APIs with timeout

+ *          specification are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_CONDVARS.

+ */

+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE

+

+/**

+ * @brief   Events Flags APIs.

+ * @details If enabled then the event flags APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_EVENTS                   FALSE

+

+/**

+ * @brief   Events Flags APIs with timeout.

+ * @details If enabled then the events APIs with timeout specification

+ *          are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_EVENTS.

+ */

+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE

+

+/**

+ * @brief   Synchronous Messages APIs.

+ * @details If enabled then the synchronous messages APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MESSAGES                 FALSE

+

+/**

+ * @brief   Synchronous Messages queuing mode.

+ * @details If enabled then messages are served by priority rather than in

+ *          FIFO order.

+ *

+ * @note    The default is @p FALSE. Enable this if you have special

+ *          requirements.

+ * @note    Requires @p CH_CFG_USE_MESSAGES.

+ */

+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE

+

+/**

+ * @brief   Mailboxes APIs.

+ * @details If enabled then the asynchronous messages (mailboxes) APIs are

+ *          included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.

+ */

+#define CH_CFG_USE_MAILBOXES                FALSE

+

+/**

+ * @brief   I/O Queues APIs.

+ * @details If enabled then the I/O queues APIs are included in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_QUEUES                   FALSE

+

+/**

+ * @brief   Core Memory Manager APIs.

+ * @details If enabled then the core memory manager APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MEMCORE                  FALSE

+

+/**

+ * @brief   Heap Allocator APIs.

+ * @details If enabled then the memory heap allocator APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or

+ *          @p CH_CFG_USE_SEMAPHORES.

+ * @note    Mutexes are recommended.

+ */

+#define CH_CFG_USE_HEAP                     FALSE

+

+/**

+ * @brief   Memory Pools Allocator APIs.

+ * @details If enabled then the memory pools allocator APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ */

+#define CH_CFG_USE_MEMPOOLS                 FALSE

+

+/**

+ * @brief   Dynamic Threads APIs.

+ * @details If enabled then the dynamic threads creation APIs are included

+ *          in the kernel.

+ *

+ * @note    The default is @p TRUE.

+ * @note    Requires @p CH_CFG_USE_WAITEXIT.

+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.

+ */

+#define CH_CFG_USE_DYNAMIC                  FALSE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Debug options

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Debug option, kernel statistics.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_STATISTICS                   TRUE

+

+/**

+ * @brief   Debug option, system state check.

+ * @details If enabled the correct call protocol for system APIs is checked

+ *          at runtime.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE

+

+/**

+ * @brief   Debug option, parameters checks.

+ * @details If enabled then the checks on the API functions input

+ *          parameters are activated.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_CHECKS                TRUE

+

+/**

+ * @brief   Debug option, consistency checks.

+ * @details If enabled then all the assertions in the kernel code are

+ *          activated. This includes consistency checks inside the kernel,

+ *          runtime anomalies and port-defined checks.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_ASSERTS               TRUE

+

+/**

+ * @brief   Debug option, trace buffer.

+ * @details If enabled then the context switch circular trace buffer is

+ *          activated.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_ENABLE_TRACE                 TRUE

+

+/**

+ * @brief   Debug option, stack checks.

+ * @details If enabled then a runtime stack check is performed.

+ *

+ * @note    The default is @p FALSE.

+ * @note    The stack check is performed in a architecture/port dependent way.

+ *          It may not be implemented or some ports.

+ * @note    The default failure mode is to halt the system with the global

+ *          @p panic_msg variable set to @p NULL.

+ */

+#define CH_DBG_ENABLE_STACK_CHECK           TRUE

+

+/**

+ * @brief   Debug option, stacks initialization.

+ * @details If enabled then the threads working area is filled with a byte

+ *          value when a thread is created. This can be useful for the

+ *          runtime measurement of the used stack.

+ *

+ * @note    The default is @p FALSE.

+ */

+#define CH_DBG_FILL_THREADS                 TRUE

+

+/**

+ * @brief   Debug option, threads profiling.

+ * @details If enabled then a field is added to the @p thread_t structure that

+ *          counts the system ticks occurred while executing the thread.

+ *

+ * @note    The default is @p FALSE.

+ * @note    This debug option is not currently compatible with the

+ *          tickless mode.

+ */

+#define CH_DBG_THREADS_PROFILING            TRUE

+

+/** @} */

+

+/*===========================================================================*/

+/**

+ * @name Kernel hooks

+ * @{

+ */

+/*===========================================================================*/

+

+/**

+ * @brief   Threads descriptor structure extension.

+ * @details User fields added to the end of the @p thread_t structure.

+ */

+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \

+  /* Add threads custom fields here.*/

+

+/**

+ * @brief   Threads initialization hook.

+ * @details User initialization code added to the @p chThdInit() API.

+ *

+ * @note    It is invoked from within @p chThdInit() and implicitly from all

+ *          the threads creation APIs.

+ */

+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \

+  /* Add threads initialization code here.*/                                \

+}

+

+/**

+ * @brief   Threads finalization hook.

+ * @details User finalization code added to the @p chThdExit() API.

+ *

+ * @note    It is inserted into lock zone.

+ * @note    It is also invoked when the threads simply return in order to

+ *          terminate.

+ */

+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \

+  /* Add threads finalization code here.*/                                  \

+}

+

+/**

+ * @brief   Context switch hook.

+ * @details This hook is invoked just before switching between threads.

+ */

+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \

+  /* Context switch code here.*/                                            \

+}

+

+/**

+ * @brief   Idle thread enter hook.

+ * @note    This hook is invoked within a critical zone, no OS functions

+ *          should be invoked from here.

+ * @note    This macro can be used to activate a power saving mode.

+ */

+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \

+}

+

+/**

+ * @brief   Idle thread leave hook.

+ * @note    This hook is invoked within a critical zone, no OS functions

+ *          should be invoked from here.

+ * @note    This macro can be used to deactivate a power saving mode.

+ */

+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \

+}

+

+/**

+ * @brief   Idle Loop hook.

+ * @details This hook is continuously invoked by the idle thread loop.

+ */

+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \

+  /* Idle loop code here.*/                                                 \

+}

+

+/**

+ * @brief   System tick event hook.

+ * @details This hook is invoked in the system tick handler immediately

+ *          after processing the virtual timers queue.

+ */

+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \

+  /* System tick event code here.*/                                         \

+}

+

+/**

+ * @brief   System halt hook.

+ * @details This hook is invoked in case to a system halting error before

+ *          the system is halted.

+ */

+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \

+  /* System halt code here.*/                                               \

+}

+

+/** @} */

+

+/*===========================================================================*/

+/* Port-specific settings (override port settings defaulted in chcore.h).    */

+/*===========================================================================*/

+

+#define TRIBUF_USE_WAIT                     TRUE

+

+#endif  /* _CHCONF_H_ */

+

+/** @} */

diff --git a/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch b/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch
index 351a935..10e0dc6 100644
--- a/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch
+++ b/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch
@@ -1,52 +1,52 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
-<stringAttribute key="bad_container_name" value="\RT-STM32F429-DISCOVERY-TRIBUF\debug"/>
-<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
-<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
-<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
-<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
-<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
-<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
-<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
-<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
-<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F429-DISCOVERY-TRIBUF"/>
-<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
-<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
-<listEntry value="/RT-STM32F429-DISCOVERY-TRIBUF"/>
-</listAttribute>
-<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
-<listEntry value="4"/>
-</listAttribute>
-<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
-<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
-</listAttribute>
-</launchConfiguration>
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>

+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">

+<stringAttribute key="bad_container_name" value="\RT-STM32F429-DISCOVERY-TRIBUF\debug"/>

+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>

+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>

+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>

+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>

+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>

+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>

+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>

+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>

+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>

+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>

+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>

+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>

+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>

+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>

+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F429-DISCOVERY-TRIBUF"/>

+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>

+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>

+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">

+<listEntry value="/RT-STM32F429-DISCOVERY-TRIBUF"/>

+</listAttribute>

+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">

+<listEntry value="4"/>

+</listAttribute>

+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">

+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>

+</listAttribute>

+</launchConfiguration>

diff --git a/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch b/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch
index 150ba3d..b28c65c 100644
--- a/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch
+++ b/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch
@@ -1,52 +1,52 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
-<stringAttribute key="bad_container_name" value="\RT-STM32F429-DISCOVERY-TRIBUF\debug"/>
-<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
-<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
-<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
-<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
-<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
-<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
-<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
-<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
-<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F429-DISCOVERY-TRIBUF"/>
-<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
-<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
-<listEntry value="/RT-STM32F429-DISCOVERY-TRIBUF"/>
-</listAttribute>
-<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
-<listEntry value="4"/>
-</listAttribute>
-<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
-<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
-</listAttribute>
-</launchConfiguration>
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>

+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">

+<stringAttribute key="bad_container_name" value="\RT-STM32F429-DISCOVERY-TRIBUF\debug"/>

+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="false"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>

+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>

+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>

+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>

+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>

+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>

+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>

+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>

+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>

+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>

+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>

+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>

+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>

+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>

+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>

+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>

+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F429-DISCOVERY-TRIBUF"/>

+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>

+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>

+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">

+<listEntry value="/RT-STM32F429-DISCOVERY-TRIBUF"/>

+</listAttribute>

+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">

+<listEntry value="4"/>

+</listAttribute>

+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">

+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>

+</listAttribute>

+</launchConfiguration>

diff --git a/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c b/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c
index 5545a74..012b2ed 100644
--- a/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c
+++ b/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c
@@ -1,212 +1,228 @@
-/*
-    Copyright (C) 2013-2015 Andrea Zoppi
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-#include "chprintf.h"
-#if HAL_USE_SERIAL_USB
-#include "usbcfg.h"
-#endif
-
-#include "tribuf.h"
-
-
-/*===========================================================================*/
-/* TriBuf related.                                                           */
-/*===========================================================================*/
-
-#define WRITE_DELAY         2
-#define READ_DELAY          1
-
-#define WRITER_WA_SIZE      256
-
-static thread_t *writertp;
-
-static tribuf_t tribuf;
-static char buffers[3];
-
-static const char text[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ\r\n";
-
-/*
- * Reads from the front buffer.
- */
-static char read_front(void) {
-
-  const char *front;
-  msg_t error;
-
-  chSysLock();
-  error = tribufWaitReadyTimeoutS(&tribuf, MS2ST(1000));
-  if (error != MSG_OK)
-    chSysHalt("ERROR: read_front timeout");
-  tribufSwapFrontI(&tribuf);
-  front = (const char *)tribufGetFrontI(&tribuf);
-  chSysUnlock();
-  return *front;
-}
-
-/*
- * Overwrites the back buffer with the provided character.
- */
-static void write_back(char c) {
-
-  char *back;
-
-  chSysLock();
-  back = (char *)tribufGetBackI(&tribuf);
-  *back = c;
-  tribufSwapBackI(&tribuf);
-  chSysUnlock();
-}
-
-/*
- * Overwrites the back buffer with a fixed text, character by character.
- */
-static THD_WORKING_AREA(writer_wa, WRITER_WA_SIZE);
-static THD_FUNCTION(writer_thread, arg) {
-
-  const uint32_t delay = (uint32_t)(msg_t)arg;
-  size_t i;
-
-  for (;;) {
-    for (i = 0; i < sizeof(text); ++i) {
-      write_back(text[i]);
-      chThdSleepMilliseconds(delay);
-    }
-  }
-}
-
-/*===========================================================================*/
-/* MISC.                                                                     */
-/*===========================================================================*/
-
-#if HAL_USE_SERIAL_USB
-/* Virtual serial port over USB.*/
-SerialUSBDriver SDU1;
-static BaseSequentialStream *const chout = (BaseSequentialStream *)&SDU1;
-#else
-static BaseSequentialStream *const chout = (BaseSequentialStream *)&SD1;
-#endif
-
-/*
- * Red LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker1");
-  while (true) {
-    palClearPad(GPIOG, GPIOG_LED4_RED);
-    chThdSleepMilliseconds(500);
-    palSetPad(GPIOG, GPIOG_LED4_RED);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-/*
- * Green LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread2, 128);
-static THD_FUNCTION(Thread2, arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker2");
-  while (true) {
-    palClearPad(GPIOG, GPIOG_LED3_GREEN);
-    chThdSleepMilliseconds(250);
-    palSetPad(GPIOG, GPIOG_LED3_GREEN);
-    chThdSleepMilliseconds(250);
-  }
-}
-
-/*===========================================================================*/
-/* Initialization and main thread.                                           */
-/*===========================================================================*/
-
-/*
- * Application entry point.
- */
-int main(void) {
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-#if HAL_USE_SERIAL_USB
-  /*
-   * Initializes a serial-over-USB CDC driver.
-   */
-  sduObjectInit(&SDU1);
-  sduStart(&SDU1, &serusbcfg);
-
-  /*
-   * Activates the USB driver and then the USB bus pull-up on D+.
-   * Note, a delay is inserted in order to not have to disconnect the cable
-   * after a reset.
-   */
-  usbDisconnectBus(serusbcfg.usbp);
-  chThdSleepMilliseconds(1000);
-  usbStart(serusbcfg.usbp, &usbcfg);
-  usbConnectBus(serusbcfg.usbp);
-#else
-  /*
-   * Initializes serial port.
-   */
-  sdStart(&SD1, NULL);
-#endif /* HAL_USE_SERIAL_USB */
-
-  /*
-   * Triple buffer handler initialization.
-   */
-  tribufObjectInit(&tribuf, &buffers[0], &buffers[1], &buffers[2]);
-
-  /*
-   * Creating the blinker threads.
-   */
-  chThdCreateStatic(waThread1, sizeof(waThread1),
-                    NORMALPRIO + 10, Thread1, NULL);
-  chThdCreateStatic(waThread2, sizeof(waThread2),
-                    NORMALPRIO + 10, Thread2, NULL);
-
-  /*
-   * Writer thread started.
-   */
-  writertp = chThdCreateStatic(writer_wa, sizeof(writer_wa),
-                               (NORMALPRIO + 1),
-                               writer_thread, (void *)WRITE_DELAY);
-
-  /*
-   * Reads from the front buffer.
-   */
-  while (!chThdTerminatedX(writertp)) {
-    chprintf(chout, "%c", read_front());
-    chThdSleepMilliseconds(READ_DELAY);
-  }
-
-  chThdRelease(writertp);
-  for (;;)
-    chThdSleepMilliseconds(100);
-  return 0;
-}
-
+/*

+    Copyright (C) 2013-2015 Andrea Zoppi

+

+    Licensed under the Apache License, Version 2.0 (the "License");

+    you may not use this file except in compliance with the License.

+    You may obtain a copy of the License at

+

+        http://www.apache.org/licenses/LICENSE-2.0

+

+    Unless required by applicable law or agreed to in writing, software

+    distributed under the License is distributed on an "AS IS" BASIS,

+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+    See the License for the specific language governing permissions and

+    limitations under the License.

+*/

+

+#include "ch.h"

+#include "hal.h"

+

+#include "chprintf.h"

+#if HAL_USE_SERIAL_USB

+#include "usbcfg.h"

+#endif

+

+#include "tribuf.h"

+

+/*===========================================================================*/

+/* MISCELLANEOUS                                                             */

+/*===========================================================================*/

+

+#if HAL_USE_SERIAL_USB

+/* Virtual serial port over USB.*/

+SerialUSBDriver SDU1;

+static BaseSequentialStream *const chout = (BaseSequentialStream *)&SDU1;

+#else

+static BaseSequentialStream *const chout = (BaseSequentialStream *)&SD1;

+#endif

+

+/*

+ * Red LED blinker thread, times are in milliseconds.

+ */

+static THD_WORKING_AREA(waThread1, 128);

+static THD_FUNCTION(Thread1, arg) {

+

+  (void)arg;

+

+  chRegSetThreadName("blinker1");

+  while (true) {

+    palClearPad(GPIOG, GPIOG_LED4_RED);

+    chThdSleepMilliseconds(500);

+    palSetPad(GPIOG, GPIOG_LED4_RED);

+    chThdSleepMilliseconds(500);

+  }

+}

+

+/*

+ * Green LED blinker thread, times are in milliseconds.

+ */

+static THD_WORKING_AREA(waThread2, 128);

+static THD_FUNCTION(Thread2, arg) {

+

+  (void)arg;

+

+  chRegSetThreadName("blinker2");

+  while (true) {

+    palClearPad(GPIOG, GPIOG_LED3_GREEN);

+    chThdSleepMilliseconds(250);

+    palSetPad(GPIOG, GPIOG_LED3_GREEN);

+    chThdSleepMilliseconds(250);

+  }

+}

+

+/*===========================================================================*/

+/* TriBuf related.                                                           */

+/*===========================================================================*/

+

+#define WRITER_DELAY        10

+#define READER_DELAY        20

+

+#define WRITER_STACK_SIZE      256

+#define READER_STACK_SIZE      256

+

+#define WRITER_PRIORITY     (NORMALPRIO + 1)

+#define READER_PRIORITY     (NORMALPRIO + 2)

+

+static thread_t *writertp;

+static thread_t *readertp;

+

+static tribuf_t tribuf;

+static char buffers[3];

+

+static const char text[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ\r\n";

+

+/*

+ * Reads from the front buffer.

+ */

+static char read_front(void) {

+

+  const char *front;

+  msg_t error;

+

+  error = tribufWaitReadyTimeout(&tribuf, MS2ST(1000));

+  if (error == MSG_TIMEOUT)

+    chSysHalt("ERROR: read_front() timed out");

+  tribufSwapFront(&tribuf);

+  front = (const char *)tribufGetFront(&tribuf);

+  return front[0];

+}

+

+/*

+ * Overwrites the back buffer with the provided character.

+ */

+static void write_back(char c) {

+

+  char *back;

+

+  back = (char *)tribufGetBack(&tribuf);

+  back[0] = c;

+  tribufSwapBack(&tribuf);

+}

+

+/*

+ * Overwrites the back buffer with a fixed text, character by character.

+ */

+static THD_WORKING_AREA(writer_wa, WRITER_STACK_SIZE);

+static THD_FUNCTION(writer_thread, arg) {

+

+  const uint32_t delay = (uint32_t)(msg_t)arg;

+  size_t i;

+  char c;

+

+  chRegSetThreadName("writer_thread");

+  for (;;) {

+    for (i = 0; i < sizeof(text); ++i) {

+      c = text[i];

+      write_back(c);

+      chThdSleepMilliseconds(delay);

+    }

+  }

+}

+

+/*

+ * Reads the front buffer and prints it.

+ */

+static THD_WORKING_AREA(reader_wa, READER_STACK_SIZE);

+static THD_FUNCTION(reader_thread, arg) {

+

+  const uint32_t delay = (uint32_t)(msg_t)arg;

+  char c;

+

+  chRegSetThreadName("reader_thread");

+  for (;;) {

+    c = read_front();

+    chprintf(chout, "%c", c);

+    chThdSleepMilliseconds(delay);

+  }

+}

+

+/*===========================================================================*/

+/* Initialization and main thread.                                           */

+/*===========================================================================*/

+

+/*

+ * Application entry point.

+ */

+int main(void) {

+

+  /*

+   * System initializations.

+   * - HAL initialization, this also initializes the configured device drivers

+   *   and performs the board-specific initializations.

+   * - Kernel initialization, the main() function becomes a thread and the

+   *   RTOS is active.

+   */

+  halInit();

+  chSysInit();

+

+#if HAL_USE_SERIAL_USB

+  /*

+   * Initializes a serial-over-USB CDC driver.

+   */

+  sduObjectInit(&SDU1);

+  sduStart(&SDU1, &serusbcfg);

+

+  /*

+   * Activates the USB driver and then the USB bus pull-up on D+.

+   * Note, a delay is inserted in order to not have to disconnect the cable

+   * after a reset.

+   */

+  usbDisconnectBus(serusbcfg.usbp);

+  chThdSleepMilliseconds(1000);

+  usbStart(serusbcfg.usbp, &usbcfg);

+  usbConnectBus(serusbcfg.usbp);

+#else

+  /*

+   * Initializes serial port.

+   */

+  sdStart(&SD1, NULL);

+#endif /* HAL_USE_SERIAL_USB */

+

+  /*

+   * Creating the blinker threads.

+   */

+  chThdCreateStatic(waThread1, sizeof(waThread1),

+                    NORMALPRIO + 10, Thread1, NULL);

+  chThdCreateStatic(waThread2, sizeof(waThread2),

+                    NORMALPRIO + 10, Thread2, NULL);

+

+  /*

+   * Writer and reader threads started for triple buffer demo.

+   */

+  tribufObjectInit(&tribuf, &buffers[0], &buffers[1], &buffers[2]);

+

+  readertp = chThdCreateStatic(reader_wa, sizeof(reader_wa),

+                               READER_PRIORITY,

+                               reader_thread, (void *)READER_DELAY);

+

+  writertp = chThdCreateStatic(writer_wa, sizeof(writer_wa),

+                               WRITER_PRIORITY,

+                               writer_thread, (void *)WRITER_DELAY);

+

+  /* TODO: Add shell commands with varying thread creation and delays */

+  for (;;)

+    chThdSleepMilliseconds(1000);

+

+  return 0;

+}

+