summaryrefslogtreecommitdiffstats
path: root/firmware/usbdrv/usbdrvasm12.inc
blob: 78a14e0b6be28f0c3e0c6ade6ae2d81b7bbacbf4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
/* Name: usbdrvasm12.inc
 * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
 * Author: Christian Starkjohann
 * Creation Date: 2004-12-29
 * Tabsize: 4
 * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
 * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
 * This Revision: $Id: usbdrvasm12.inc 740 2009-04-13 18:23:31Z cs $
 */

/* Do not link this file! Link usbdrvasm.S instead, which includes the
 * appropriate implementation!
 */

/*
General Description:
This file is the 12 MHz version of the asssembler part of the USB driver. It
requires a 12 MHz crystal (not a ceramic resonator and not a calibrated RC
oscillator).

See usbdrv.h for a description of the entire driver.

Since almost all of this code is timing critical, don't change unless you
really know what you are doing! Many parts require not only a maximum number
of CPU cycles, but even an exact number of cycles!


Timing constraints according to spec (in bit times):
timing subject                                      min max    CPUcycles
---------------------------------------------------------------------------
EOP of OUT/SETUP to sync pattern of DATA0 (both rx) 2   16     16-128
EOP of IN to sync pattern of DATA0 (rx, then tx)    2   7.5    16-60
DATAx (rx) to ACK/NAK/STALL (tx)                    2   7.5    16-60
*/

;Software-receiver engine. Strict timing! Don't change unless you can preserve timing!
;interrupt response time: 4 cycles + insn running = 7 max if interrupts always enabled
;max allowable interrupt latency: 34 cycles -> max 25 cycles interrupt disable
;max stack usage: [ret(2), YL, SREG, YH, shift, x1, x2, x3, cnt, x4] = 11 bytes
;Numbers in brackets are maximum cycles since SOF.
USB_INTR_VECTOR:
;order of registers pushed: YL, SREG [sofError], YH, shift, x1, x2, x3, cnt
    push    YL              ;2 [35] push only what is necessary to sync with edge ASAP
	
    in      YL, SREG        ;1 [37]
    push    YL              ;2 [39]

	in		YL, TIMSK
	cpi		YL, 0
	breq	compare2						; don't go to app if equal (possible bootloader)

	; prep and jump to app vector
	pop YL
	out      SREG, YL
	pop YL
	rjmp __vectors - 2

compare2:
	in		YL, TCNT2
	cpi		YL, 0xFF	
	breq	bootloaderExt0					; don't go to app if equal (bootloader)

	; prep and jump to app vector
	pop YL
	out      SREG, YL
	pop YL
	
	; some errors with 1 nop
	;nop
	;nop
	;nop
	;nop
	;nop
	;nop
	;nop
	;nop
	;nop
	;nop
	
	
	rjmp __vectors - 2


bootloaderExt0:
	ldi YL, 0
	

;----------------------------------------------------------------------------
; Synchronize with sync pattern:
;----------------------------------------------------------------------------
;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K]
;sync up with J to K edge during sync pattern -- use fastest possible loops
;The first part waits at most 1 bit long since we must be in sync pattern.
;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to
;waitForJ, ensure that this prerequisite is met.
waitForJ:
    inc     YL
    sbis    USBIN, USBMINUS
    brne    waitForJ        ; just make sure we have ANY timeout
waitForK:
;The following code results in a sampling window of 1/4 bit which meets the spec.
    sbis    USBIN, USBMINUS
    rjmp    foundK
    sbis    USBIN, USBMINUS
    rjmp    foundK
    sbis    USBIN, USBMINUS
    rjmp    foundK
    sbis    USBIN, USBMINUS
    rjmp    foundK
    sbis    USBIN, USBMINUS
    rjmp    foundK
#if USB_COUNT_SOF
    lds     YL, usbSofCount
    inc     YL
    sts     usbSofCount, YL
#endif  /* USB_COUNT_SOF */
#ifdef USB_SOF_HOOK
    USB_SOF_HOOK
#endif
    rjmp    sofError
foundK:
;{3, 5} after falling D- edge, average delay: 4 cycles [we want 4 for center sampling]
;we have 1 bit time for setup purposes, then sample again. Numbers in brackets
;are cycles from center of first sync (double K) bit after the instruction
    push    YH                  ;2 [2]
    lds     YL, usbInputBufOffset;2 [4]
    clr     YH                  ;1 [5]
    subi    YL, lo8(-(usbRxBuf));1 [6]
    sbci    YH, hi8(-(usbRxBuf));1 [7]

    sbis    USBIN, USBMINUS ;1 [8] we want two bits K [sample 1 cycle too early]
    rjmp    haveTwoBitsK    ;2 [10]
    pop     YH              ;2 [11] undo the push from before
    rjmp    waitForK        ;2 [13] this was not the end of sync, retry
haveTwoBitsK:
;----------------------------------------------------------------------------
; push more registers and initialize values while we sample the first bits:
;----------------------------------------------------------------------------
    push    shift           ;2 [16]
    push    x1              ;2 [12]
    push    x2              ;2 [14]

    in      x1, USBIN       ;1 [17] <-- sample bit 0
    ldi     shift, 0xff     ;1 [18]
    bst     x1, USBMINUS    ;1 [19]
    bld     shift, 0        ;1 [20]
    push    x3              ;2 [22]
    push    cnt             ;2 [24]
    
    in      x2, USBIN       ;1 [25] <-- sample bit 1
    ser     x3              ;1 [26] [inserted init instruction]
    eor     x1, x2          ;1 [27]
    bst     x1, USBMINUS    ;1 [28]
    bld     shift, 1        ;1 [29]
    ldi     cnt, USB_BUFSIZE;1 [30] [inserted init instruction]
    rjmp    rxbit2          ;2 [32]

;----------------------------------------------------------------------------
; Receiver loop (numbers in brackets are cycles within byte after instr)
;----------------------------------------------------------------------------

unstuff0:               ;1 (branch taken)
    andi    x3, ~0x01   ;1 [15]
    mov     x1, x2      ;1 [16] x2 contains last sampled (stuffed) bit
    in      x2, USBIN   ;1 [17] <-- sample bit 1 again
    ori     shift, 0x01 ;1 [18]
    rjmp    didUnstuff0 ;2 [20]

unstuff1:               ;1 (branch taken)
    mov     x2, x1      ;1 [21] x1 contains last sampled (stuffed) bit
    andi    x3, ~0x02   ;1 [22]
    ori     shift, 0x02 ;1 [23]
    nop                 ;1 [24]
    in      x1, USBIN   ;1 [25] <-- sample bit 2 again
    rjmp    didUnstuff1 ;2 [27]

unstuff2:               ;1 (branch taken)
    andi    x3, ~0x04   ;1 [29]
    ori     shift, 0x04 ;1 [30]
    mov     x1, x2      ;1 [31] x2 contains last sampled (stuffed) bit
    nop                 ;1 [32]
    in      x2, USBIN   ;1 [33] <-- sample bit 3
    rjmp    didUnstuff2 ;2 [35]

unstuff3:               ;1 (branch taken)
    in      x2, USBIN   ;1 [34] <-- sample stuffed bit 3 [one cycle too late]
    andi    x3, ~0x08   ;1 [35]
    ori     shift, 0x08 ;1 [36]
    rjmp    didUnstuff3 ;2 [38]

unstuff4:               ;1 (branch taken)
    andi    x3, ~0x10   ;1 [40]
    in      x1, USBIN   ;1 [41] <-- sample stuffed bit 4
    ori     shift, 0x10 ;1 [42]
    rjmp    didUnstuff4 ;2 [44]

unstuff5:               ;1 (branch taken)
    andi    x3, ~0x20   ;1 [48]
    in      x2, USBIN   ;1 [49] <-- sample stuffed bit 5
    ori     shift, 0x20 ;1 [50]
    rjmp    didUnstuff5 ;2 [52]

unstuff6:               ;1 (branch taken)
    andi    x3, ~0x40   ;1 [56]
    in      x1, USBIN   ;1 [57] <-- sample stuffed bit 6
    ori     shift, 0x40 ;1 [58]
    rjmp    didUnstuff6 ;2 [60]

; extra jobs done during bit interval:
; bit 0:    store, clear [SE0 is unreliable here due to bit dribbling in hubs]
; bit 1:    se0 check
; bit 2:    overflow check
; bit 3:    recovery from delay [bit 0 tasks took too long]
; bit 4:    none
; bit 5:    none
; bit 6:    none
; bit 7:    jump, eor
rxLoop:
    eor     x3, shift   ;1 [0] reconstruct: x3 is 0 at bit locations we changed, 1 at others
    in      x1, USBIN   ;1 [1] <-- sample bit 0
    st      y+, x3      ;2 [3] store data
    ser     x3          ;1 [4]
    nop                 ;1 [5]
    eor     x2, x1      ;1 [6]
    bst     x2, USBMINUS;1 [7]
    bld     shift, 0    ;1 [8]
    in      x2, USBIN   ;1 [9] <-- sample bit 1 (or possibly bit 0 stuffed)
    andi    x2, USBMASK ;1 [10]
    breq    se0         ;1 [11] SE0 check for bit 1
    andi    shift, 0xf9 ;1 [12]
didUnstuff0:
    breq    unstuff0    ;1 [13]
    eor     x1, x2      ;1 [14]
    bst     x1, USBMINUS;1 [15]
    bld     shift, 1    ;1 [16]
rxbit2:
    in      x1, USBIN   ;1 [17] <-- sample bit 2 (or possibly bit 1 stuffed)
    andi    shift, 0xf3 ;1 [18]
    breq    unstuff1    ;1 [19] do remaining work for bit 1
didUnstuff1:
    subi    cnt, 1      ;1 [20]
    brcs    overflow    ;1 [21] loop control
    eor     x2, x1      ;1 [22]
    bst     x2, USBMINUS;1 [23]
    bld     shift, 2    ;1 [24]
    in      x2, USBIN   ;1 [25] <-- sample bit 3 (or possibly bit 2 stuffed)
    andi    shift, 0xe7 ;1 [26]
    breq    unstuff2    ;1 [27]
didUnstuff2:
    eor     x1, x2      ;1 [28]
    bst     x1, USBMINUS;1 [29]
    bld     shift, 3    ;1 [30]
didUnstuff3:
    andi    shift, 0xcf ;1 [31]
    breq    unstuff3    ;1 [32]
    in      x1, USBIN   ;1 [33] <-- sample bit 4
    eor     x2, x1      ;1 [34]
    bst     x2, USBMINUS;1 [35]
    bld     shift, 4    ;1 [36]
didUnstuff4:
    andi    shift, 0x9f ;1 [37]
    breq    unstuff4    ;1 [38]
    nop2                ;2 [40]
    in      x2, USBIN   ;1 [41] <-- sample bit 5
    eor     x1, x2      ;1 [42]
    bst     x1, USBMINUS;1 [43]
    bld     shift, 5    ;1 [44]
didUnstuff5:
    andi    shift, 0x3f ;1 [45]
    breq    unstuff5    ;1 [46]
    nop2                ;2 [48]
    in      x1, USBIN   ;1 [49] <-- sample bit 6
    eor     x2, x1      ;1 [50]
    bst     x2, USBMINUS;1 [51]
    bld     shift, 6    ;1 [52]
didUnstuff6:
    cpi     shift, 0x02 ;1 [53]
    brlo    unstuff6    ;1 [54]
    nop2                ;2 [56]
    in      x2, USBIN   ;1 [57] <-- sample bit 7
    eor     x1, x2      ;1 [58]
    bst     x1, USBMINUS;1 [59]
    bld     shift, 7    ;1 [60]
didUnstuff7:
    cpi     shift, 0x04 ;1 [61]
    brsh    rxLoop      ;2 [63] loop control
unstuff7:
    andi    x3, ~0x80   ;1 [63]
    ori     shift, 0x80 ;1 [64]
    in      x2, USBIN   ;1 [65] <-- sample stuffed bit 7
    nop                 ;1 [66]
    rjmp    didUnstuff7 ;2 [68]

macro POP_STANDARD ; 12 cycles
    pop     cnt
    pop     x3
    pop     x2
    pop     x1
    pop     shift
    pop     YH
    endm
macro POP_RETI     ; 5 cycles
    pop     YL
    out     SREG, YL
    pop     YL
    endm

#include "asmcommon.inc"

;----------------------------------------------------------------------------
; Transmitting data
;----------------------------------------------------------------------------

txByteLoop:
txBitloop:
stuffN1Delay:                   ;     [03]
    ror     shift               ;[-5] [11] [59]
    brcc    doExorN1            ;[-4]      [60]
    subi    x4, 1               ;[-3]
    brne    commonN1            ;[-2]
    lsl     shift               ;[-1] compensate ror after rjmp stuffDelay
    nop                         ;[00] stuffing consists of just waiting 8 cycles
    rjmp    stuffN1Delay        ;[01] after ror, C bit is reliably clear

sendNakAndReti:                 ;0 [-19] 19 cycles until SOP
    ldi     x3, USBPID_NAK      ;1 [-18]
    rjmp    usbSendX3           ;2 [-16]
sendAckAndReti:                 ;0 [-19] 19 cycles until SOP
    ldi     x3, USBPID_ACK      ;1 [-18]
    rjmp    usbSendX3           ;2 [-16]
sendCntAndReti:                 ;0 [-17] 17 cycles until SOP
    mov     x3, cnt             ;1 [-16]
usbSendX3:                      ;0 [-16]
    ldi     YL, 20              ;1 [-15] 'x3' is R20
    ldi     YH, 0               ;1 [-14]
    ldi     cnt, 2              ;1 [-13]
;   rjmp    usbSendAndReti      fallthrough

; USB spec says:
; idle = J
; J = (D+ = 0), (D- = 1) or USBOUT = 0x01
; K = (D+ = 1), (D- = 0) or USBOUT = 0x02
; Spec allows 7.5 bit times from EOP to SOP for replies (= 60 cycles)

;usbSend:
;pointer to data in 'Y'
;number of bytes in 'cnt' -- including sync byte
;uses: x1...x2, x4, shift, cnt, Y [x1 = mirror USBOUT, x2 = USBMASK, x4 = bitstuff cnt]
;Numbers in brackets are time since first bit of sync pattern is sent (start of instruction)
usbSendAndReti:
    in      x2, USBDDR          ;[-12] 12 cycles until SOP
    ori     x2, USBMASK         ;[-11]
    sbi     USBOUT, USBMINUS    ;[-10] prepare idle state; D+ and D- must have been 0 (no pullups)
    out     USBDDR, x2          ;[-8] <--- acquire bus
    in      x1, USBOUT          ;[-7] port mirror for tx loop
    ldi     shift, 0x40         ;[-6] sync byte is first byte sent (we enter loop after ror)
    ldi     x2, USBMASK         ;[-5]
    push    x4                  ;[-4]
doExorN1:
    eor     x1, x2              ;[-2] [06] [62]
    ldi     x4, 6               ;[-1] [07] [63]
commonN1:
stuffN2Delay:
    out     USBOUT, x1          ;[00] [08] [64] <--- set bit
    ror     shift               ;[01]
    brcc    doExorN2            ;[02]
    subi    x4, 1               ;[03]
    brne    commonN2            ;[04]
    lsl     shift               ;[05] compensate ror after rjmp stuffDelay
    rjmp    stuffN2Delay        ;[06] after ror, C bit is reliably clear
doExorN2:
    eor     x1, x2              ;[04] [12]
    ldi     x4, 6               ;[05] [13]
commonN2:
    nop                         ;[06] [14]
    subi    cnt, 171            ;[07] [15] trick: (3 * 171) & 0xff = 1
    out     USBOUT, x1          ;[08] [16] <--- set bit
    brcs    txBitloop           ;[09]      [25] [41]

stuff6Delay:
    ror     shift               ;[42] [50]
    brcc    doExor6             ;[43]
    subi    x4, 1               ;[44]
    brne    common6             ;[45]
    lsl     shift               ;[46] compensate ror after rjmp stuffDelay
    nop                         ;[47] stuffing consists of just waiting 8 cycles
    rjmp    stuff6Delay         ;[48] after ror, C bit is reliably clear
doExor6:
    eor     x1, x2              ;[45] [53]
    ldi     x4, 6               ;[46]
common6:
stuff7Delay:
    ror     shift               ;[47] [55]
    out     USBOUT, x1          ;[48] <--- set bit
    brcc    doExor7             ;[49]
    subi    x4, 1               ;[50]
    brne    common7             ;[51]
    lsl     shift               ;[52] compensate ror after rjmp stuffDelay
    rjmp    stuff7Delay         ;[53] after ror, C bit is reliably clear
doExor7:
    eor     x1, x2              ;[51] [59]
    ldi     x4, 6               ;[52]
common7:
    ld      shift, y+           ;[53]
    tst     cnt                 ;[55]
    out     USBOUT, x1          ;[56] <--- set bit
    brne    txByteLoop          ;[57]

;make SE0:
    cbr     x1, USBMASK         ;[58] prepare SE0 [spec says EOP may be 15 to 18 cycles]
    lds     x2, usbNewDeviceAddr;[59]
    lsl     x2                  ;[61] we compare with left shifted address
    subi    YL, 2 + 20          ;[62] Only assign address on data packets, not ACK/NAK in x3
    sbci    YH, 0               ;[63]
    out     USBOUT, x1          ;[00] <-- out SE0 -- from now 2 bits = 16 cycles until bus idle
;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm:
;set address only after data packet was sent, not after handshake
    breq    skipAddrAssign      ;[01]
    sts     usbDeviceAddr, x2   ; if not skipped: SE0 is one cycle longer
skipAddrAssign:
;end of usbDeviceAddress transfer
    ldi     x2, 1<<USB_INTR_PENDING_BIT;[03] int0 occurred during TX -- clear pending flag
    USB_STORE_PENDING(x2)       ;[04]
    ori     x1, USBIDLE         ;[05]
    in      x2, USBDDR          ;[06]
    cbr     x2, USBMASK         ;[07] set both pins to input
    mov     x3, x1              ;[08]
    cbr     x3, USBMASK         ;[09] configure no pullup on both pins
    pop     x4                  ;[10]
    nop2                        ;[12]
    nop2                        ;[14]
    out     USBOUT, x1          ;[16] <-- out J (idle) -- end of SE0 (EOP signal)
    out     USBDDR, x2          ;[17] <-- release bus now
    out     USBOUT, x3          ;[18] <-- ensure no pull-up resistors are active
    rjmp    doReturn