blob: 4675ae943d3edf0a4a7f2eabe7c747f269f3ae5c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
|
# Name: Makefile
# Project: Micronucleus
# License: GNU GPL v2 (see License.txt)
# Controller type: ATtiny 85
# Configuration: Size optimized. Uses 16 MHz V-USB implementation, which may be instable with some computers
# Last Change: Jan 11,2015
# Enable unsafe optimizions. This will disable several safety features in microncleus to save around 40 more bytes
#
# Disabled features:
# * Stack pointer and SREG initialization in CRT
# * Client side reset vector patching
# * USB collision detection. Micronucleus will not work reliability with hubs if this is disabled.
CFLAGS += -DENABLE_UNSAFE_OPTIMIZATIONS
F_CPU = 16000000
DEVICE = attiny85
# hexadecimal address for bootloader section to begin. To calculate the best value:
# - make clean; make main.hex; ### output will list data: 2124 (or something like that)
# - for the size of your device (8kb = 1024 * 8 = 8192) subtract above value 2124... = 6068
# - How many pages in is that? 6068 / 64 (tiny85 page size in bytes) = 94.8125
# - round that down to 94 - our new bootloader address is 94 * 64 = 6016, in hex = 1780
BOOTLOADER_ADDRESS = 1A40
FUSEOPT = -U lfuse:w:0xe1:m -U hfuse:w:0xdd:m -U efuse:w:0xfe:m
FUSEOPT_DISABLERESET = -U lfuse:w:0xe1:m -U efuse:w:0xfe:m -U hfuse:w:0x5d:m
#---------------------------------------------------------------------
# ATtiny85
#---------------------------------------------------------------------
# Fuse extended byte:
# 0xFE = - - - - - 1 1 0
# ^
# |
# +---- SELFPRGEN (enable self programming flash)
#
# Fuse high byte:
# 0xdd = 1 1 0 1 1 1 0 1
# ^ ^ ^ ^ ^ \-+-/
# | | | | | +------ BODLEVEL 2..0 (brownout trigger level -> 2.7V)
# | | | | +---------- EESAVE (preserve EEPROM on Chip Erase -> not preserved)
# | | | +-------------- WDTON (watchdog timer always on -> disable)
# | | +---------------- SPIEN (enable serial programming -> enabled)
# | +------------------ DWEN (debug wire enable)
# +-------------------- RSTDISBL (disable external reset -> enabled)
#
# Fuse high byte ("no reset": external reset disabled, can't program through SPI anymore)
# 0x5d = 0 1 0 1 1 1 0 1
# ^ ^ ^ ^ ^ \-+-/
# | | | | | +------ BODLEVEL 2..0 (brownout trigger level -> 2.7V)
# | | | | +---------- EESAVE (preserve EEPROM on Chip Erase -> not preserved)
# | | | +-------------- WDTON (watchdog timer always on -> disable)
# | | +---------------- SPIEN (enable serial programming -> enabled)
# | +------------------ DWEN (debug wire enable)
# +-------------------- RSTDISBL (disable external reset -> disabled!)
#
# Fuse low byte:
# 0xe1 = 1 1 1 0 0 0 0 1
# ^ ^ \+/ \--+--/
# | | | +------- CKSEL 3..0 (clock selection -> HF PLL)
# | | +--------------- SUT 1..0 (BOD enabled, fast rising power)
# | +------------------ CKOUT (clock output on CKOUT pin -> disabled)
# +-------------------- CKDIV8 (divide clock by 8 -> don't divide)
###############################################################################
|
