summaryrefslogtreecommitdiffstats
path: root/software/pong3_bsp/Makefile
diff options
context:
space:
mode:
Diffstat (limited to 'software/pong3_bsp/Makefile')
-rw-r--r--software/pong3_bsp/Makefile786
1 files changed, 786 insertions, 0 deletions
diff --git a/software/pong3_bsp/Makefile b/software/pong3_bsp/Makefile
new file mode 100644
index 0000000..dd9ec2d
--- /dev/null
+++ b/software/pong3_bsp/Makefile
@@ -0,0 +1,786 @@
+#------------------------------------------------------------------------------
+# BSP MAKEFILE
+#
+# This makefile was automatically generated by the nios2-bsp-generate-files
+# command. Its purpose is to build a custom Board Support Package (BSP)
+# targeting a specific Nios II processor in an SOPC Builder-based design.
+#
+# To create an application or library Makefile which uses this BSP, try the
+# nios2-app-generate-makefile or nios2-lib-generate-makefile commands.
+#------------------------------------------------------------------------------
+
+#------------------------------------------------------------------------------
+# TOOLS
+#------------------------------------------------------------------------------
+
+MKDIR := mkdir -p
+ECHO := echo
+SPACE := $(empty) $(empty)
+
+#------------------------------------------------------------------------------
+# The adjust-path macro
+#
+# If COMSPEC is defined, Make is launched from Windows through
+# Cygwin. This adjust-path macro will call 'cygpath -u' on all
+# paths to ensure they are readable by Make.
+#
+# If COMSPEC is not defined, Make is launched from *nix, and no adjustment
+# is necessary
+#------------------------------------------------------------------------------
+
+ifndef COMSPEC
+ifdef ComSpec
+COMSPEC = $(ComSpec)
+endif # ComSpec
+endif # !COMSPEC
+
+ifdef COMSPEC
+ adjust-path = $(subst $(SPACE),\$(SPACE),$(shell cygpath -u "$1"))
+ adjust-path-mixed = $(subst $(SPACE),\$(SPACE),$(shell cygpath -m "$1"))
+else
+ adjust-path = $(subst $(SPACE),\$(SPACE),$1)
+ adjust-path-mixed = $(subst $(SPACE),\$(SPACE),$1)
+endif
+
+#------------------------------------------------------------------------------
+# DEFAULT TARGET
+#
+# The default target, "all", must appear before any other target in the
+# Makefile. Note that extra prerequisites are added to the "all" rule later.
+#------------------------------------------------------------------------------
+.PHONY: all
+all:
+ @$(ECHO) [BSP build complete]
+
+
+#------------------------------------------------------------------------------
+# PATHS & DIRECTORY NAMES
+#
+# Explicitly locate absolute path of the BSP root
+#------------------------------------------------------------------------------
+
+BSP_ROOT_DIR := .
+
+# Define absolute path to the root of the BSP.
+ABS_BSP_ROOT := $(call adjust-path-mixed,$(shell pwd))
+
+# Stash all BSP object files here
+OBJ_DIR := ./obj
+
+NEWLIB_DIR = $(BSP_ROOT_DIR)/newlib
+
+
+#------------------------------------------------------------------------------
+# MANAGED CONTENT
+#
+# All content between the lines "START MANAGED" and "END MANAGED" below is
+# generated based on variables in the BSP settings file when the
+# nios2-bsp-generate-files command is invoked. If you wish to persist any
+# information pertaining to the build process, it is recomended that you
+# utilize the BSP settings mechanism to do so.
+#
+# Note that most variable assignments in this section have a corresponding BSP
+# setting that can be changed by using the nios2-bsp-create-settings or
+# nios2-bsp-update-settings command before nios2-bsp-generate-files; if you
+# want any variable set to a specific value when this Makefile is re-generated
+# (to prevent hand-edits from being over-written), use the BSP settings
+# facilities above.
+#------------------------------------------------------------------------------
+
+#START MANAGED
+
+# The following TYPE comment allows tools to identify the 'type' of target this
+# makefile is associated with.
+# TYPE: BSP_PRIVATE_MAKEFILE
+
+# This following VERSION comment indicates the version of the tool used to
+# generate this makefile. A makefile variable is provided for VERSION as well.
+# ACDS_VERSION: 13.0sp1
+ACDS_VERSION := 13.0sp1
+
+# This following BUILD_NUMBER comment indicates the build number of the tool
+# used to generate this makefile.
+# BUILD_NUMBER: 232
+
+SETTINGS_FILE := settings.bsp
+SOPC_FILE := /root/projects/pong3/hardware/my_sys.sopcinfo
+
+#-------------------------------------------------------------------------------
+# TOOL & COMMAND DEFINITIONS
+#
+# The base command for each build operation are expressed here. Additional
+# switches may be expressed here. They will run for all instances of the
+# utility.
+#-------------------------------------------------------------------------------
+
+# Archiver command. Creates library files.
+AR = nios2-elf-ar
+
+# Assembler command. Note that CC is used for .S files.
+AS = nios2-elf-gcc
+
+# Custom flags only passed to the archiver. This content of this variable is
+# directly passed to the archiver rather than the more standard "ARFLAGS". The
+# reason for this is that GNU Make assumes some default content in ARFLAGS.
+# This setting defines the value of BSP_ARFLAGS in Makefile.
+BSP_ARFLAGS = -src
+
+# Custom flags only passed to the assembler. This setting defines the value of
+# BSP_ASFLAGS in Makefile.
+BSP_ASFLAGS = -Wa,-gdwarf2
+
+# C/C++ compiler debug level. '-g' provides the default set of debug symbols
+# typically required to debug a typical application. Omitting '-g' removes
+# debug symbols from the ELF. This setting defines the value of
+# BSP_CFLAGS_DEBUG in Makefile.
+BSP_CFLAGS_DEBUG = -g
+
+# C/C++ compiler optimization level. "-O0" = no optimization,"-O2" = "normal"
+# optimization, etc. "-O0" is recommended for code that you want to debug since
+# compiler optimization can remove variables and produce non-sequential
+# execution of code while debugging. This setting defines the value of
+# BSP_CFLAGS_OPTIMIZATION in Makefile.
+BSP_CFLAGS_OPTIMIZATION = -O0
+
+# C/C++ compiler warning level. "-Wall" is commonly used.This setting defines
+# the value of BSP_CFLAGS_WARNINGS in Makefile.
+BSP_CFLAGS_WARNINGS = -Wall
+
+# C compiler command.
+CC = nios2-elf-gcc -xc
+
+# C++ compiler command.
+CXX = nios2-elf-gcc -xc++
+
+# Command used to remove files during 'clean' target.
+RM = rm -f
+
+
+#-------------------------------------------------------------------------------
+# BUILD PRE & POST PROCESS COMMANDS
+#
+# The following variables are treated as shell commands in the rule
+# definitions for each file-type associated with the BSP build, as well as
+# commands run at the beginning and end of the entire BSP build operation.
+# Pre-process commands are executed before the relevant command (for example,
+# a command defined in the "CC_PRE_PROCESS" variable executes before the C
+# compiler for building .c files), while post-process commands are executed
+# immediately afterwards.
+#
+# You can view each pre/post-process command in the "Build Rules: All &
+# Clean", "Pattern Rules to Build Objects", and "Library Rules" sections of
+# this Makefile.
+#-------------------------------------------------------------------------------
+
+
+#-------------------------------------------------------------------------------
+# BSP SOURCE BUILD SETTINGS (FLAG GENERATION)
+#
+# Software build settings such as compiler optimization, debug level, warning
+# flags, etc., may be defined in the following variables. The variables below
+# are concatenated together in the 'Flags' section of this Makefile to form
+# final variables of flags passed to the build tools.
+#
+# These settings are considered private to the BSP and apply to all library &
+# driver files in it; they do NOT automatically propagate to, for example, the
+# build settings for an application.
+# # For additional detail and syntax requirements, please refer to GCC help
+# (example: "nios2-elf-gcc --help --verbose").
+#
+# Unless indicated otherwise, multiple entries in each variable should be
+# space-separated.
+#-------------------------------------------------------------------------------
+
+# Altera HAL alt_sys_init.c generated source file
+GENERATED_C_FILES := $(ABS_BSP_ROOT)/alt_sys_init.c
+GENERATED_C_LIB_SRCS += alt_sys_init.c
+
+
+#-------------------------------------------------------------------------------
+# BSP SOURCE FILE LISTING
+#
+# All source files that comprise the BSP are listed here, along with path
+# information to each file expressed relative to the BSP root. The precise
+# list and location of each file is derived from the driver, operating system,
+# or software package source file declarations.
+#
+# Following specification of the source files for each component, driver, etc.,
+# each source file type (C, assembly, etc.) is concatenated together and used
+# to construct a list of objects. Pattern rules to build each object are then
+# used to build each file.
+#-------------------------------------------------------------------------------
+
+# altera_avalon_epcs_flash_controller_driver sources root
+altera_avalon_epcs_flash_controller_driver_SRCS_ROOT := drivers
+
+# altera_avalon_epcs_flash_controller_driver sources
+altera_avalon_epcs_flash_controller_driver_C_LIB_SRCS := \
+ $(altera_avalon_epcs_flash_controller_driver_SRCS_ROOT)/src/altera_avalon_epcs_flash_controller.c \
+ $(altera_avalon_epcs_flash_controller_driver_SRCS_ROOT)/src/epcs_commands.c \
+ $(altera_avalon_epcs_flash_controller_driver_SRCS_ROOT)/src/altera_avalon_spi.c
+
+# altera_avalon_jtag_uart_driver sources root
+altera_avalon_jtag_uart_driver_SRCS_ROOT := drivers
+
+# altera_avalon_jtag_uart_driver sources
+altera_avalon_jtag_uart_driver_C_LIB_SRCS := \
+ $(altera_avalon_jtag_uart_driver_SRCS_ROOT)/src/altera_avalon_jtag_uart_init.c \
+ $(altera_avalon_jtag_uart_driver_SRCS_ROOT)/src/altera_avalon_jtag_uart_read.c \
+ $(altera_avalon_jtag_uart_driver_SRCS_ROOT)/src/altera_avalon_jtag_uart_write.c \
+ $(altera_avalon_jtag_uart_driver_SRCS_ROOT)/src/altera_avalon_jtag_uart_ioctl.c \
+ $(altera_avalon_jtag_uart_driver_SRCS_ROOT)/src/altera_avalon_jtag_uart_fd.c
+
+# altera_avalon_pio_driver sources root
+altera_avalon_pio_driver_SRCS_ROOT := drivers
+
+# altera_avalon_pio_driver sources
+# altera_avalon_timer_driver sources root
+altera_avalon_timer_driver_SRCS_ROOT := drivers
+
+# altera_avalon_timer_driver sources
+altera_avalon_timer_driver_C_LIB_SRCS := \
+ $(altera_avalon_timer_driver_SRCS_ROOT)/src/altera_avalon_timer_sc.c \
+ $(altera_avalon_timer_driver_SRCS_ROOT)/src/altera_avalon_timer_ts.c \
+ $(altera_avalon_timer_driver_SRCS_ROOT)/src/altera_avalon_timer_vars.c
+
+# altera_nios2_qsys_hal_driver sources root
+altera_nios2_qsys_hal_driver_SRCS_ROOT := HAL
+
+# altera_nios2_qsys_hal_driver sources
+altera_nios2_qsys_hal_driver_C_LIB_SRCS := \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/altera_nios2_qsys_irq.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_usleep.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_busy_sleep.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_irq_vars.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_icache_flush.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_icache_flush_all.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_dcache_flush.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_dcache_flush_all.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_dcache_flush_no_writeback.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_instruction_exception_entry.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_irq_register.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_iic.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_remap_cached.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_remap_uncached.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_uncached_free.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_uncached_malloc.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_do_ctors.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_do_dtors.c \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_gmon.c
+
+altera_nios2_qsys_hal_driver_ASM_LIB_SRCS := \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_exception_entry.S \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_exception_trap.S \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_exception_muldiv.S \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_irq_entry.S \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_software_exception.S \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_mcount.S \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_log_macro.S \
+ $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/crt0.S
+
+# hal sources root
+hal_SRCS_ROOT := HAL
+
+# hal sources
+hal_C_LIB_SRCS := \
+ $(hal_SRCS_ROOT)/src/alt_alarm_start.c \
+ $(hal_SRCS_ROOT)/src/alt_close.c \
+ $(hal_SRCS_ROOT)/src/alt_dev.c \
+ $(hal_SRCS_ROOT)/src/alt_dev_llist_insert.c \
+ $(hal_SRCS_ROOT)/src/alt_dma_rxchan_open.c \
+ $(hal_SRCS_ROOT)/src/alt_dma_txchan_open.c \
+ $(hal_SRCS_ROOT)/src/alt_environ.c \
+ $(hal_SRCS_ROOT)/src/alt_env_lock.c \
+ $(hal_SRCS_ROOT)/src/alt_errno.c \
+ $(hal_SRCS_ROOT)/src/alt_execve.c \
+ $(hal_SRCS_ROOT)/src/alt_exit.c \
+ $(hal_SRCS_ROOT)/src/alt_fcntl.c \
+ $(hal_SRCS_ROOT)/src/alt_fd_lock.c \
+ $(hal_SRCS_ROOT)/src/alt_fd_unlock.c \
+ $(hal_SRCS_ROOT)/src/alt_find_dev.c \
+ $(hal_SRCS_ROOT)/src/alt_find_file.c \
+ $(hal_SRCS_ROOT)/src/alt_flash_dev.c \
+ $(hal_SRCS_ROOT)/src/alt_fork.c \
+ $(hal_SRCS_ROOT)/src/alt_fs_reg.c \
+ $(hal_SRCS_ROOT)/src/alt_fstat.c \
+ $(hal_SRCS_ROOT)/src/alt_get_fd.c \
+ $(hal_SRCS_ROOT)/src/alt_getchar.c \
+ $(hal_SRCS_ROOT)/src/alt_getpid.c \
+ $(hal_SRCS_ROOT)/src/alt_gettod.c \
+ $(hal_SRCS_ROOT)/src/alt_iic_isr_register.c \
+ $(hal_SRCS_ROOT)/src/alt_instruction_exception_register.c \
+ $(hal_SRCS_ROOT)/src/alt_ioctl.c \
+ $(hal_SRCS_ROOT)/src/alt_io_redirect.c \
+ $(hal_SRCS_ROOT)/src/alt_irq_handler.c \
+ $(hal_SRCS_ROOT)/src/alt_isatty.c \
+ $(hal_SRCS_ROOT)/src/alt_kill.c \
+ $(hal_SRCS_ROOT)/src/alt_link.c \
+ $(hal_SRCS_ROOT)/src/alt_load.c \
+ $(hal_SRCS_ROOT)/src/alt_log_printf.c \
+ $(hal_SRCS_ROOT)/src/alt_lseek.c \
+ $(hal_SRCS_ROOT)/src/alt_main.c \
+ $(hal_SRCS_ROOT)/src/alt_malloc_lock.c \
+ $(hal_SRCS_ROOT)/src/alt_open.c \
+ $(hal_SRCS_ROOT)/src/alt_printf.c \
+ $(hal_SRCS_ROOT)/src/alt_putchar.c \
+ $(hal_SRCS_ROOT)/src/alt_putstr.c \
+ $(hal_SRCS_ROOT)/src/alt_read.c \
+ $(hal_SRCS_ROOT)/src/alt_release_fd.c \
+ $(hal_SRCS_ROOT)/src/alt_rename.c \
+ $(hal_SRCS_ROOT)/src/alt_sbrk.c \
+ $(hal_SRCS_ROOT)/src/alt_settod.c \
+ $(hal_SRCS_ROOT)/src/alt_stat.c \
+ $(hal_SRCS_ROOT)/src/alt_tick.c \
+ $(hal_SRCS_ROOT)/src/alt_times.c \
+ $(hal_SRCS_ROOT)/src/alt_unlink.c \
+ $(hal_SRCS_ROOT)/src/alt_wait.c \
+ $(hal_SRCS_ROOT)/src/alt_write.c
+
+
+# Assemble all component C source files
+COMPONENT_C_LIB_SRCS += \
+ $(altera_avalon_epcs_flash_controller_driver_C_LIB_SRCS) \
+ $(altera_avalon_jtag_uart_driver_C_LIB_SRCS) \
+ $(altera_avalon_timer_driver_C_LIB_SRCS) \
+ $(altera_nios2_qsys_hal_driver_C_LIB_SRCS) \
+ $(hal_C_LIB_SRCS)
+
+# Assemble all component assembly source files
+COMPONENT_ASM_LIB_SRCS += \
+ $(altera_nios2_qsys_hal_driver_ASM_LIB_SRCS)
+
+# Assemble all component C++ source files
+COMPONENT_CPP_LIB_SRCS += \
+
+#END MANAGED
+
+#------------------------------------------------------------------------------
+# PUBLIC.MK
+#
+# The generated public.mk file contains BSP information that is shared with
+# other external makefiles, such as a Nios II application makefile. System-
+# dependent information such as hardware-specific compiler flags and
+# simulation file generation are stored here.
+#
+# In addition, public.mk contains include paths that various software,
+# such as a device driver, may need for the C compiler. These paths are
+# written to public.mk with respect to the BSP root. In public.mk, each
+# path is prefixed with a special variable, $(ALT_LIBRARY_ROOT_DIR). The
+# purpose of this variable is to allow an external Makefile to append on
+# path information to precisely locate paths expressed in public.mk
+# Since this is the BSP Makefile, we set ALT_LIBRARY_ROOT_DIR to point right
+# here ("."), at the BSP root.
+#
+# ALT_LIBRARY_ROOT_DIR must always be set before public.mk is included.
+#------------------------------------------------------------------------------
+ALT_LIBRARY_ROOT_DIR := .
+include public.mk
+
+
+#------------------------------------------------------------------------------
+# FLAGS
+#
+# Include paths for BSP files are written into the public.mk file and must
+# be added to the existing list of pre-processor flags. In addition, "hooks"
+# for standard flags left intentionally empty (CFLAGS, CPPFLAGS, ASFLAGS,
+# and CXXFLAGS) are provided for conveniently adding to the relevant flags
+# on the command-line or via script that calls make.
+#------------------------------------------------------------------------------
+# Assemble final list of compiler flags from generated content
+BSP_CFLAGS += \
+ $(BSP_CFLAGS_DEFINED_SYMBOLS) \
+ $(BSP_CFLAGS_UNDEFINED_SYMBOLS) \
+ $(BSP_CFLAGS_OPTIMIZATION) \
+ $(BSP_CFLAGS_DEBUG) \
+ $(BSP_CFLAGS_WARNINGS) \
+ $(BSP_CFLAGS_USER_FLAGS) \
+ $(ALT_CFLAGS) \
+ $(CFLAGS)
+
+# Make ready the final list of include directories and other C pre-processor
+# flags. Each include path is made ready by prefixing it with "-I".
+BSP_CPPFLAGS += \
+ $(addprefix -I, $(BSP_INC_DIRS)) \
+ $(addprefix -I, $(ALT_INCLUDE_DIRS)) \
+ $(ALT_CPPFLAGS) \
+ $(CPPFLAGS)
+
+# Finish off assembler flags with any user-provided flags
+BSP_ASFLAGS += $(ASFLAGS)
+
+# Finish off C++ flags with any user-provided flags
+BSP_CXXFLAGS += $(CXXFLAGS)
+
+# And finally, the ordered list
+C_SRCS += $(GENERATED_C_LIB_SRCS) \
+ $(COMPONENT_C_LIB_SRCS)
+
+CXX_SRCS += $(GENERATED_CPP_LIB_SRCS) \
+ $(COMPONENT_CPP_LIB_SRCS)
+
+ASM_SRCS += $(GENERATED_ASM_LIB_SRCS) \
+ $(COMPONENT_ASM_LIB_SRCS)
+
+
+#------------------------------------------------------------------------------
+# LIST OF GENERATED FILES
+#
+# A Nios II BSP relies on the generation of several source files used
+# by both the BSP and any applications referencing the BSP.
+#------------------------------------------------------------------------------
+
+
+GENERATED_H_FILES := $(ABS_BSP_ROOT)/system.h
+
+GENERATED_LINKER_SCRIPT := $(ABS_BSP_ROOT)/linker.x
+
+GENERATED_FILES += $(GENERATED_H_FILES) \
+ $(GENERATED_LINKER_SCRIPT)
+
+
+#------------------------------------------------------------------------------
+# SETUP TO BUILD OBJECTS
+#
+# List of object files which are to be built. This is constructed from the input
+# list of C source files (C_SRCS), C++ source files (CXX_SRCS), and assembler
+# source file (ASM_SRCS). The permitted file extensions are:
+#
+# .c .C - for C files
+# .cxx .cc .cpp .CXX .CC .CPP - for C++ files
+# .S .s - for assembly files
+#
+# Extended description: The list of objects is a sorted list (duplicates
+# removed) of all possible objects, placed beneath the ./obj directory,
+# including any path information stored in the "*_SRCS" variable. The
+# "patsubst" commands are used to concatenate together multiple file suffix
+# types for common files (i.e. c++ as .cxx, .cc, .cpp).
+#
+# File extensions are case-insensitive in build rules with the exception of
+# assembly sources. Nios II assembly sources with the ".S" extension are first
+# run through the C preprocessor. Sources with the ".s" extension are not.
+#------------------------------------------------------------------------------
+OBJS = $(sort $(addprefix $(OBJ_DIR)/, \
+ $(patsubst %.c, %.o, $(patsubst %.C, %.o, $(C_SRCS))) \
+ $(patsubst %.cxx, %.o, $(patsubst %.CXX, %.o, \
+ $(patsubst %.cc, %.o, $(patsubst %.CC, %.o, \
+ $(patsubst %.cpp, %.o, $(patsubst %.CPP, %.o, \
+ $(CXX_SRCS) )))))) \
+ $(patsubst %.S, %.o, $(patsubst %.s, %.o, $(ASM_SRCS))) ))
+
+# List of dependancy files for each object file.
+DEPS = $(OBJS:.o=.d)
+
+
+# Rules to force your project to rebuild or relink
+# .force_relink file will cause any application that depends on this project to relink
+# .force_rebuild file will cause this project to rebuild object files
+# .force_rebuild_all file will cause this project and any project that depends on this project to rebuild object files
+
+FORCE_RELINK_DEP := .force_relink
+FORCE_REBUILD_DEP := .force_rebuild
+FORCE_REBUILD_ALL_DEP := .force_rebuild_all
+FORCE_REBUILD_DEP_LIST := $(FORCE_RELINK_DEP) $(FORCE_REBUILD_DEP) $(FORCE_REBUILD_ALL_DEP)
+
+$(FORCE_REBUILD_DEP_LIST):
+
+$(OBJS): $(wildcard $(FORCE_REBUILD_DEP)) $(wildcard $(FORCE_REBUILD_ALL_DEP))
+
+
+#------------------------------------------------------------------------------
+# BUILD RULES: ALL & CLEAN
+#------------------------------------------------------------------------------
+.DELETE_ON_ERROR:
+
+.PHONY: all
+all: build_pre_process
+all: Makefile $(GENERATED_FILES) $(BSP_LIB) $(NEWLIB_DIR)
+all: build_post_process
+
+
+# clean: remove .o/.a/.d
+.PHONY: clean
+clean:
+ @$(RM) -r $(BSP_LIB) $(OBJ_DIR) $(FORCE_REBUILD_DEP_LIST)
+ifneq ($(wildcard $(NEWLIB_DIR)),)
+ @$(RM) -r $(NEWLIB_DIR)
+endif
+ @$(ECHO) [BSP clean complete]
+
+
+#------------------------------------------------------------------------------
+# BUILD PRE/POST PROCESS
+#------------------------------------------------------------------------------
+build_pre_process :
+ $(BUILD_PRE_PROCESS)
+
+build_post_process :
+ $(BUILD_POST_PROCESS)
+
+.PHONY: build_pre_process build_post_process
+
+
+
+#------------------------------------------------------------------------------
+# MAKEFILE UP TO DATE?
+#
+# Is this very Makefile up to date? Someone may have changed the BSP settings
+# file or the associated target hardware.
+#------------------------------------------------------------------------------
+# Skip this check when clean is the only target
+ifneq ($(MAKECMDGOALS),clean)
+
+ifneq ($(wildcard $(SETTINGS_FILE)),$(SETTINGS_FILE))
+$(warning Warning: BSP Settings File $(SETTINGS_FILE) could not be found.)
+endif
+
+Makefile: $(wildcard $(SETTINGS_FILE))
+ @$(ECHO) Makefile not up to date.
+ @$(ECHO) $(SETTINGS_FILE) has been modified since the BSP Makefile was generated.
+ @$(ECHO)
+ @$(ECHO) Generate the BSP to update the Makefile, and then build again.
+ @$(ECHO)
+ @$(ECHO) To generate from Eclipse:
+ @$(ECHO) " 1. Right-click the BSP project."
+ @$(ECHO) " 2. In the Nios II Menu, click Generate BSP."
+ @$(ECHO)
+ @$(ECHO) To generate from the command line:
+ @$(ECHO) " nios2-bsp-generate-files --settings=<settings file> --bsp-dir=<target bsp files directory>"
+ @$(ECHO)
+ @exit 1
+
+ifneq ($(wildcard $(SOPC_FILE)),$(SOPC_FILE))
+$(warning Warning: SOPC File $(SOPC_FILE) could not be found.)
+endif
+
+public.mk: $(wildcard $(SOPC_FILE))
+ @$(ECHO) Makefile not up to date.
+ @$(ECHO) $(SOPC_FILE) has been modified since the BSP was generated.
+ @$(ECHO)
+ @$(ECHO) Generate the BSP to update the Makefile, and then build again.
+ @$(ECHO)
+ @$(ECHO) To generate from Eclipse:
+ @$(ECHO) " 1. Right-click the BSP project."
+ @$(ECHO) " 2. In the Nios II Menu, click Generate BSP."
+ @$(ECHO)
+ @$(ECHO) To generate from the command line:
+ @$(ECHO) " nios2-bsp-generate-files --settings=<settings file> --bsp-dir=<target bsp files directory>"
+ @$(ECHO)
+ @exit 1
+
+endif # $(MAKECMDGOALS) != clean
+
+#------------------------------------------------------------------------------
+# PATTERN RULES TO BUILD OBJECTS
+#------------------------------------------------------------------------------
+$(OBJ_DIR)/%.o: %.c
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CC_PRE_PROCESS)
+ $(CC) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CC_POST_PROCESS)
+
+$(OBJ_DIR)/%.o: %.C
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CC_PRE_PROCESS)
+ $(CC) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CC_POST_PROCESS)
+
+$(OBJ_DIR)/%.o: %.cpp
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_POST_PROCESS)
+
+$(OBJ_DIR)/%.o: %.CPP
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_POST_PROCESS)
+
+$(OBJ_DIR)/%.o: %.cc
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_POST_PROCESS)
+
+$(OBJ_DIR)/%.o: %.CC
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_POST_PROCESS)
+
+$(OBJ_DIR)/%.o: %.cxx
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_POST_PROCESS)
+
+$(OBJ_DIR)/%.o: %.CXX
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_POST_PROCESS)
+
+$(OBJ_DIR)/%.o: %.S
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(AS_PRE_PROCESS)
+ $(AS) -MP -MMD -c $(BSP_CFLAGS) $(BSP_CPPFLAGS) $(BSP_ASFLAGS) -o $@ $<
+ $(AS_POST_PROCESS)
+
+$(OBJ_DIR)/%.o: %.s
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(AS_PRE_PROCESS)
+ $(AS) -MP -MMD -c $(BSP_ASFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(AS_POST_PROCESS)
+
+# Pattern rules for making useful intermediate files
+$(OBJ_DIR)/%.s: %.c
+ @$(ECHO) Compiling $(<F) to assembler...
+ @$(MKDIR) $(@D)
+ $(CC_PRE_PROCESS)
+ $(CC) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CC_POST_PROCESS)
+
+$(OBJ_DIR)/%.s: %.cpp
+ @$(ECHO) Compiling $(<F) to assembler...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_PRE_PROCESS)
+
+$(OBJ_DIR)/%.s: %.cc
+ @$(ECHO) Compiling $(<F) to assembler...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_PRE_PROCESS)
+
+$(OBJ_DIR)/%.s: %.cxx
+ @$(ECHO) Compiling $(<F) to assembler...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_PRE_PROCESS)
+
+$(OBJ_DIR)/%.i: %.c
+ @$(ECHO) Compiling $(<F) to assembler...
+ @$(MKDIR) $(@D)
+ $(CC_PRE_PROCESS)
+ $(CC) -E $(CPPFLAGS) $(ALT_CFLAGS) $(CFLAGS) -o $@ $<
+ $(CC_PRE_PROCESS)
+
+$(OBJ_DIR)/%.i: %.cpp
+ @$(ECHO) Compiling $(<F) to assembler...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_PRE_PROCESS)
+
+$(OBJ_DIR)/%.i: %.cc
+ @$(ECHO) Compiling $(<F) to assembler...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_PRE_PROCESS)
+
+$(OBJ_DIR)/%.i: %.cxx
+ @$(ECHO) Compiling $(<F) to assembler...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_PRE_PROCESS)
+
+# Pattern rules for building other object files.
+%.o: %.c
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CC_PRE_PROCESS)
+ $(CC) -MP -MMD -c $(CPPFLAGS) $(ALT_CFLAGS) $(CFLAGS) -o $@ $<
+ $(CC_POST_PROCESS)
+
+%.o: %.cpp
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CXX_POST_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_POST_PROCESS)
+
+%.o: %.cc
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CXX_POST_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_POST_PROCESS)
+
+%.o: %.cxx
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(CXX_PRE_PROCESS)
+ $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(CXX_POST_PROCESS)
+
+%.o: %.S
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(AS_PRE_PROCESS)
+ $(AS) -MP -MMD -c $(BSP_CFLAGS) $(BSP_CPPFLAGS) $(BSP_ASFLAGS) -o $@ $<
+ $(AS_POST_PROCESS)
+
+%.o: %.s
+ @$(ECHO) Compiling $(<F)...
+ @$(MKDIR) $(@D)
+ $(AS_PRE_PROCESS)
+ $(AS) -MP -MMD -c $(BSP_ASFLAGS) $(BSP_CFLAGS) -o $@ $<
+ $(AS_POST_PROCESS)
+
+
+#------------------------------------------------------------------------------
+# NEWLIB RULES
+#------------------------------------------------------------------------------
+
+ifneq ($(COMPILE_NEWLIB),)
+NEWLIB_FLAGS += $(BSP_CFLAGS)
+endif
+
+ifneq ($(NEWLIB_FLAGS),)
+ALT_LIBRARY_DIRS += $(NEWLIB_DIR)/nios2-elf/lib
+endif
+
+$(NEWLIB_DIR):
+ifneq ($(NEWLIB_FLAGS),)
+ @$(ECHO) Creating $(NEWLIB_DIR)...
+ nios2-newlib-gen --no-multilib $(NEWLIB_DIR)-build-tmp $(NEWLIB_DIR) --custom "$(NEWLIB_FLAGS)"
+ @$(ECHO) Removing $(NEWLIB_DIR)-build-tmp...
+ @$(RM) -rf $(NEWLIB_DIR)-build-tmp
+endif
+
+#------------------------------------------------------------------------------
+# LIBRARY RULES
+#------------------------------------------------------------------------------
+$(BSP_LIB): $(OBJS)
+ @$(ECHO) Creating $@...
+ $(AR_PRE_PROCESS)
+ $(RM) -f $@
+ $(AR) $(BSP_ARFLAGS) $@ $^
+ $(AR_POST_PROCESS)
+
+
+#------------------------------------------------------------------------------
+# DEPENDENCY FILES
+#------------------------------------------------------------------------------
+ifneq ($(findstring clean, $(MAKECMDGOALS)),clean)
+-include $(DEPS)
+endif
+
+# End of Makefile
+
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-30 05:53:10 +0000