diff options
Diffstat (limited to 'software/pong3_bsp/Makefile')
| -rw-r--r-- | software/pong3_bsp/Makefile | 786 |
1 files changed, 0 insertions, 786 deletions
diff --git a/software/pong3_bsp/Makefile b/software/pong3_bsp/Makefile deleted file mode 100644 index d40fcef..0000000 --- a/software/pong3_bsp/Makefile +++ /dev/null @@ -1,786 +0,0 @@ -#------------------------------------------------------------------------------ -# BSP MAKEFILE -# -# This makefile was automatically generated by the nios2-bsp-generate-files -# command. Its purpose is to build a custom Board Support Package (BSP) -# targeting a specific Nios II processor in an SOPC Builder-based design. -# -# To create an application or library Makefile which uses this BSP, try the -# nios2-app-generate-makefile or nios2-lib-generate-makefile commands. -#------------------------------------------------------------------------------ - -#------------------------------------------------------------------------------ -# TOOLS -#------------------------------------------------------------------------------ - -MKDIR := mkdir -p -ECHO := echo -SPACE := $(empty) $(empty) - -#------------------------------------------------------------------------------ -# The adjust-path macro -# -# If COMSPEC is defined, Make is launched from Windows through -# Cygwin. This adjust-path macro will call 'cygpath -u' on all -# paths to ensure they are readable by Make. -# -# If COMSPEC is not defined, Make is launched from *nix, and no adjustment -# is necessary -#------------------------------------------------------------------------------ - -ifndef COMSPEC -ifdef ComSpec -COMSPEC = $(ComSpec) -endif # ComSpec -endif # !COMSPEC - -ifdef COMSPEC - adjust-path = $(subst $(SPACE),\$(SPACE),$(shell cygpath -u "$1")) - adjust-path-mixed = $(subst $(SPACE),\$(SPACE),$(shell cygpath -m "$1")) -else - adjust-path = $(subst $(SPACE),\$(SPACE),$1) - adjust-path-mixed = $(subst $(SPACE),\$(SPACE),$1) -endif - -#------------------------------------------------------------------------------ -# DEFAULT TARGET -# -# The default target, "all", must appear before any other target in the -# Makefile. Note that extra prerequisites are added to the "all" rule later. -#------------------------------------------------------------------------------ -.PHONY: all -all: - @$(ECHO) [BSP build complete] - - -#------------------------------------------------------------------------------ -# PATHS & DIRECTORY NAMES -# -# Explicitly locate absolute path of the BSP root -#------------------------------------------------------------------------------ - -BSP_ROOT_DIR := . - -# Define absolute path to the root of the BSP. -ABS_BSP_ROOT := $(call adjust-path-mixed,$(shell pwd)) - -# Stash all BSP object files here -OBJ_DIR := ./obj - -NEWLIB_DIR = $(BSP_ROOT_DIR)/newlib - - -#------------------------------------------------------------------------------ -# MANAGED CONTENT -# -# All content between the lines "START MANAGED" and "END MANAGED" below is -# generated based on variables in the BSP settings file when the -# nios2-bsp-generate-files command is invoked. If you wish to persist any -# information pertaining to the build process, it is recomended that you -# utilize the BSP settings mechanism to do so. -# -# Note that most variable assignments in this section have a corresponding BSP -# setting that can be changed by using the nios2-bsp-create-settings or -# nios2-bsp-update-settings command before nios2-bsp-generate-files; if you -# want any variable set to a specific value when this Makefile is re-generated -# (to prevent hand-edits from being over-written), use the BSP settings -# facilities above. -#------------------------------------------------------------------------------ - -#START MANAGED - -# The following TYPE comment allows tools to identify the 'type' of target this -# makefile is associated with. -# TYPE: BSP_PRIVATE_MAKEFILE - -# This following VERSION comment indicates the version of the tool used to -# generate this makefile. A makefile variable is provided for VERSION as well. -# ACDS_VERSION: 13.0sp1 -ACDS_VERSION := 13.0sp1 - -# This following BUILD_NUMBER comment indicates the build number of the tool -# used to generate this makefile. -# BUILD_NUMBER: 232 - -SETTINGS_FILE := settings.bsp -SOPC_FILE := ../../my_sys.sopcinfo - -#------------------------------------------------------------------------------- -# TOOL & COMMAND DEFINITIONS -# -# The base command for each build operation are expressed here. Additional -# switches may be expressed here. They will run for all instances of the -# utility. -#------------------------------------------------------------------------------- - -# Archiver command. Creates library files. -AR = nios2-elf-ar - -# Assembler command. Note that CC is used for .S files. -AS = nios2-elf-gcc - -# Custom flags only passed to the archiver. This content of this variable is -# directly passed to the archiver rather than the more standard "ARFLAGS". The -# reason for this is that GNU Make assumes some default content in ARFLAGS. -# This setting defines the value of BSP_ARFLAGS in Makefile. -BSP_ARFLAGS = -src - -# Custom flags only passed to the assembler. This setting defines the value of -# BSP_ASFLAGS in Makefile. -BSP_ASFLAGS = -Wa,-gdwarf2 - -# C/C++ compiler debug level. '-g' provides the default set of debug symbols -# typically required to debug a typical application. Omitting '-g' removes -# debug symbols from the ELF. This setting defines the value of -# BSP_CFLAGS_DEBUG in Makefile. -BSP_CFLAGS_DEBUG = -g - -# C/C++ compiler optimization level. "-O0" = no optimization,"-O2" = "normal" -# optimization, etc. "-O0" is recommended for code that you want to debug since -# compiler optimization can remove variables and produce non-sequential -# execution of code while debugging. This setting defines the value of -# BSP_CFLAGS_OPTIMIZATION in Makefile. -BSP_CFLAGS_OPTIMIZATION = -O0 - -# C/C++ compiler warning level. "-Wall" is commonly used.This setting defines -# the value of BSP_CFLAGS_WARNINGS in Makefile. -BSP_CFLAGS_WARNINGS = -Wall - -# C compiler command. -CC = nios2-elf-gcc -xc - -# C++ compiler command. -CXX = nios2-elf-gcc -xc++ - -# Command used to remove files during 'clean' target. -RM = rm -f - - -#------------------------------------------------------------------------------- -# BUILD PRE & POST PROCESS COMMANDS -# -# The following variables are treated as shell commands in the rule -# definitions for each file-type associated with the BSP build, as well as -# commands run at the beginning and end of the entire BSP build operation. -# Pre-process commands are executed before the relevant command (for example, -# a command defined in the "CC_PRE_PROCESS" variable executes before the C -# compiler for building .c files), while post-process commands are executed -# immediately afterwards. -# -# You can view each pre/post-process command in the "Build Rules: All & -# Clean", "Pattern Rules to Build Objects", and "Library Rules" sections of -# this Makefile. -#------------------------------------------------------------------------------- - - -#------------------------------------------------------------------------------- -# BSP SOURCE BUILD SETTINGS (FLAG GENERATION) -# -# Software build settings such as compiler optimization, debug level, warning -# flags, etc., may be defined in the following variables. The variables below -# are concatenated together in the 'Flags' section of this Makefile to form -# final variables of flags passed to the build tools. -# -# These settings are considered private to the BSP and apply to all library & -# driver files in it; they do NOT automatically propagate to, for example, the -# build settings for an application. -# # For additional detail and syntax requirements, please refer to GCC help -# (example: "nios2-elf-gcc --help --verbose"). -# -# Unless indicated otherwise, multiple entries in each variable should be -# space-separated. -#------------------------------------------------------------------------------- - -# Altera HAL alt_sys_init.c generated source file -GENERATED_C_FILES := $(ABS_BSP_ROOT)/alt_sys_init.c -GENERATED_C_LIB_SRCS += alt_sys_init.c - - -#------------------------------------------------------------------------------- -# BSP SOURCE FILE LISTING -# -# All source files that comprise the BSP are listed here, along with path -# information to each file expressed relative to the BSP root. The precise -# list and location of each file is derived from the driver, operating system, -# or software package source file declarations. -# -# Following specification of the source files for each component, driver, etc., -# each source file type (C, assembly, etc.) is concatenated together and used -# to construct a list of objects. Pattern rules to build each object are then -# used to build each file. -#------------------------------------------------------------------------------- - -# altera_avalon_epcs_flash_controller_driver sources root -altera_avalon_epcs_flash_controller_driver_SRCS_ROOT := drivers - -# altera_avalon_epcs_flash_controller_driver sources -altera_avalon_epcs_flash_controller_driver_C_LIB_SRCS := \ - $(altera_avalon_epcs_flash_controller_driver_SRCS_ROOT)/src/altera_avalon_epcs_flash_controller.c \ - $(altera_avalon_epcs_flash_controller_driver_SRCS_ROOT)/src/epcs_commands.c \ - $(altera_avalon_epcs_flash_controller_driver_SRCS_ROOT)/src/altera_avalon_spi.c - -# altera_avalon_jtag_uart_driver sources root -altera_avalon_jtag_uart_driver_SRCS_ROOT := drivers - -# altera_avalon_jtag_uart_driver sources -altera_avalon_jtag_uart_driver_C_LIB_SRCS := \ - $(altera_avalon_jtag_uart_driver_SRCS_ROOT)/src/altera_avalon_jtag_uart_init.c \ - $(altera_avalon_jtag_uart_driver_SRCS_ROOT)/src/altera_avalon_jtag_uart_read.c \ - $(altera_avalon_jtag_uart_driver_SRCS_ROOT)/src/altera_avalon_jtag_uart_write.c \ - $(altera_avalon_jtag_uart_driver_SRCS_ROOT)/src/altera_avalon_jtag_uart_ioctl.c \ - $(altera_avalon_jtag_uart_driver_SRCS_ROOT)/src/altera_avalon_jtag_uart_fd.c - -# altera_avalon_pio_driver sources root -altera_avalon_pio_driver_SRCS_ROOT := drivers - -# altera_avalon_pio_driver sources -# altera_avalon_timer_driver sources root -altera_avalon_timer_driver_SRCS_ROOT := drivers - -# altera_avalon_timer_driver sources -altera_avalon_timer_driver_C_LIB_SRCS := \ - $(altera_avalon_timer_driver_SRCS_ROOT)/src/altera_avalon_timer_sc.c \ - $(altera_avalon_timer_driver_SRCS_ROOT)/src/altera_avalon_timer_ts.c \ - $(altera_avalon_timer_driver_SRCS_ROOT)/src/altera_avalon_timer_vars.c - -# altera_nios2_qsys_hal_driver sources root -altera_nios2_qsys_hal_driver_SRCS_ROOT := HAL - -# altera_nios2_qsys_hal_driver sources -altera_nios2_qsys_hal_driver_C_LIB_SRCS := \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/altera_nios2_qsys_irq.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_usleep.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_busy_sleep.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_irq_vars.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_icache_flush.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_icache_flush_all.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_dcache_flush.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_dcache_flush_all.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_dcache_flush_no_writeback.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_instruction_exception_entry.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_irq_register.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_iic.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_remap_cached.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_remap_uncached.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_uncached_free.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_uncached_malloc.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_do_ctors.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_do_dtors.c \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_gmon.c - -altera_nios2_qsys_hal_driver_ASM_LIB_SRCS := \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_exception_entry.S \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_exception_trap.S \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_exception_muldiv.S \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_irq_entry.S \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_software_exception.S \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_mcount.S \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/alt_log_macro.S \ - $(altera_nios2_qsys_hal_driver_SRCS_ROOT)/src/crt0.S - -# hal sources root -hal_SRCS_ROOT := HAL - -# hal sources -hal_C_LIB_SRCS := \ - $(hal_SRCS_ROOT)/src/alt_alarm_start.c \ - $(hal_SRCS_ROOT)/src/alt_close.c \ - $(hal_SRCS_ROOT)/src/alt_dev.c \ - $(hal_SRCS_ROOT)/src/alt_dev_llist_insert.c \ - $(hal_SRCS_ROOT)/src/alt_dma_rxchan_open.c \ - $(hal_SRCS_ROOT)/src/alt_dma_txchan_open.c \ - $(hal_SRCS_ROOT)/src/alt_environ.c \ - $(hal_SRCS_ROOT)/src/alt_env_lock.c \ - $(hal_SRCS_ROOT)/src/alt_errno.c \ - $(hal_SRCS_ROOT)/src/alt_execve.c \ - $(hal_SRCS_ROOT)/src/alt_exit.c \ - $(hal_SRCS_ROOT)/src/alt_fcntl.c \ - $(hal_SRCS_ROOT)/src/alt_fd_lock.c \ - $(hal_SRCS_ROOT)/src/alt_fd_unlock.c \ - $(hal_SRCS_ROOT)/src/alt_find_dev.c \ - $(hal_SRCS_ROOT)/src/alt_find_file.c \ - $(hal_SRCS_ROOT)/src/alt_flash_dev.c \ - $(hal_SRCS_ROOT)/src/alt_fork.c \ - $(hal_SRCS_ROOT)/src/alt_fs_reg.c \ - $(hal_SRCS_ROOT)/src/alt_fstat.c \ - $(hal_SRCS_ROOT)/src/alt_get_fd.c \ - $(hal_SRCS_ROOT)/src/alt_getchar.c \ - $(hal_SRCS_ROOT)/src/alt_getpid.c \ - $(hal_SRCS_ROOT)/src/alt_gettod.c \ - $(hal_SRCS_ROOT)/src/alt_iic_isr_register.c \ - $(hal_SRCS_ROOT)/src/alt_instruction_exception_register.c \ - $(hal_SRCS_ROOT)/src/alt_ioctl.c \ - $(hal_SRCS_ROOT)/src/alt_io_redirect.c \ - $(hal_SRCS_ROOT)/src/alt_irq_handler.c \ - $(hal_SRCS_ROOT)/src/alt_isatty.c \ - $(hal_SRCS_ROOT)/src/alt_kill.c \ - $(hal_SRCS_ROOT)/src/alt_link.c \ - $(hal_SRCS_ROOT)/src/alt_load.c \ - $(hal_SRCS_ROOT)/src/alt_log_printf.c \ - $(hal_SRCS_ROOT)/src/alt_lseek.c \ - $(hal_SRCS_ROOT)/src/alt_main.c \ - $(hal_SRCS_ROOT)/src/alt_malloc_lock.c \ - $(hal_SRCS_ROOT)/src/alt_open.c \ - $(hal_SRCS_ROOT)/src/alt_printf.c \ - $(hal_SRCS_ROOT)/src/alt_putchar.c \ - $(hal_SRCS_ROOT)/src/alt_putstr.c \ - $(hal_SRCS_ROOT)/src/alt_read.c \ - $(hal_SRCS_ROOT)/src/alt_release_fd.c \ - $(hal_SRCS_ROOT)/src/alt_rename.c \ - $(hal_SRCS_ROOT)/src/alt_sbrk.c \ - $(hal_SRCS_ROOT)/src/alt_settod.c \ - $(hal_SRCS_ROOT)/src/alt_stat.c \ - $(hal_SRCS_ROOT)/src/alt_tick.c \ - $(hal_SRCS_ROOT)/src/alt_times.c \ - $(hal_SRCS_ROOT)/src/alt_unlink.c \ - $(hal_SRCS_ROOT)/src/alt_wait.c \ - $(hal_SRCS_ROOT)/src/alt_write.c - - -# Assemble all component C source files -COMPONENT_C_LIB_SRCS += \ - $(altera_avalon_epcs_flash_controller_driver_C_LIB_SRCS) \ - $(altera_avalon_jtag_uart_driver_C_LIB_SRCS) \ - $(altera_avalon_timer_driver_C_LIB_SRCS) \ - $(altera_nios2_qsys_hal_driver_C_LIB_SRCS) \ - $(hal_C_LIB_SRCS) - -# Assemble all component assembly source files -COMPONENT_ASM_LIB_SRCS += \ - $(altera_nios2_qsys_hal_driver_ASM_LIB_SRCS) - -# Assemble all component C++ source files -COMPONENT_CPP_LIB_SRCS += \ - -#END MANAGED - -#------------------------------------------------------------------------------ -# PUBLIC.MK -# -# The generated public.mk file contains BSP information that is shared with -# other external makefiles, such as a Nios II application makefile. System- -# dependent information such as hardware-specific compiler flags and -# simulation file generation are stored here. -# -# In addition, public.mk contains include paths that various software, -# such as a device driver, may need for the C compiler. These paths are -# written to public.mk with respect to the BSP root. In public.mk, each -# path is prefixed with a special variable, $(ALT_LIBRARY_ROOT_DIR). The -# purpose of this variable is to allow an external Makefile to append on -# path information to precisely locate paths expressed in public.mk -# Since this is the BSP Makefile, we set ALT_LIBRARY_ROOT_DIR to point right -# here ("."), at the BSP root. -# -# ALT_LIBRARY_ROOT_DIR must always be set before public.mk is included. -#------------------------------------------------------------------------------ -ALT_LIBRARY_ROOT_DIR := . -include public.mk - - -#------------------------------------------------------------------------------ -# FLAGS -# -# Include paths for BSP files are written into the public.mk file and must -# be added to the existing list of pre-processor flags. In addition, "hooks" -# for standard flags left intentionally empty (CFLAGS, CPPFLAGS, ASFLAGS, -# and CXXFLAGS) are provided for conveniently adding to the relevant flags -# on the command-line or via script that calls make. -#------------------------------------------------------------------------------ -# Assemble final list of compiler flags from generated content -BSP_CFLAGS += \ - $(BSP_CFLAGS_DEFINED_SYMBOLS) \ - $(BSP_CFLAGS_UNDEFINED_SYMBOLS) \ - $(BSP_CFLAGS_OPTIMIZATION) \ - $(BSP_CFLAGS_DEBUG) \ - $(BSP_CFLAGS_WARNINGS) \ - $(BSP_CFLAGS_USER_FLAGS) \ - $(ALT_CFLAGS) \ - $(CFLAGS) - -# Make ready the final list of include directories and other C pre-processor -# flags. Each include path is made ready by prefixing it with "-I". -BSP_CPPFLAGS += \ - $(addprefix -I, $(BSP_INC_DIRS)) \ - $(addprefix -I, $(ALT_INCLUDE_DIRS)) \ - $(ALT_CPPFLAGS) \ - $(CPPFLAGS) - -# Finish off assembler flags with any user-provided flags -BSP_ASFLAGS += $(ASFLAGS) - -# Finish off C++ flags with any user-provided flags -BSP_CXXFLAGS += $(CXXFLAGS) - -# And finally, the ordered list -C_SRCS += $(GENERATED_C_LIB_SRCS) \ - $(COMPONENT_C_LIB_SRCS) - -CXX_SRCS += $(GENERATED_CPP_LIB_SRCS) \ - $(COMPONENT_CPP_LIB_SRCS) - -ASM_SRCS += $(GENERATED_ASM_LIB_SRCS) \ - $(COMPONENT_ASM_LIB_SRCS) - - -#------------------------------------------------------------------------------ -# LIST OF GENERATED FILES -# -# A Nios II BSP relies on the generation of several source files used -# by both the BSP and any applications referencing the BSP. -#------------------------------------------------------------------------------ - - -GENERATED_H_FILES := $(ABS_BSP_ROOT)/system.h - -GENERATED_LINKER_SCRIPT := $(ABS_BSP_ROOT)/linker.x - -GENERATED_FILES += $(GENERATED_H_FILES) \ - $(GENERATED_LINKER_SCRIPT) - - -#------------------------------------------------------------------------------ -# SETUP TO BUILD OBJECTS -# -# List of object files which are to be built. This is constructed from the input -# list of C source files (C_SRCS), C++ source files (CXX_SRCS), and assembler -# source file (ASM_SRCS). The permitted file extensions are: -# -# .c .C - for C files -# .cxx .cc .cpp .CXX .CC .CPP - for C++ files -# .S .s - for assembly files -# -# Extended description: The list of objects is a sorted list (duplicates -# removed) of all possible objects, placed beneath the ./obj directory, -# including any path information stored in the "*_SRCS" variable. The -# "patsubst" commands are used to concatenate together multiple file suffix -# types for common files (i.e. c++ as .cxx, .cc, .cpp). -# -# File extensions are case-insensitive in build rules with the exception of -# assembly sources. Nios II assembly sources with the ".S" extension are first -# run through the C preprocessor. Sources with the ".s" extension are not. -#------------------------------------------------------------------------------ -OBJS = $(sort $(addprefix $(OBJ_DIR)/, \ - $(patsubst %.c, %.o, $(patsubst %.C, %.o, $(C_SRCS))) \ - $(patsubst %.cxx, %.o, $(patsubst %.CXX, %.o, \ - $(patsubst %.cc, %.o, $(patsubst %.CC, %.o, \ - $(patsubst %.cpp, %.o, $(patsubst %.CPP, %.o, \ - $(CXX_SRCS) )))))) \ - $(patsubst %.S, %.o, $(patsubst %.s, %.o, $(ASM_SRCS))) )) - -# List of dependancy files for each object file. -DEPS = $(OBJS:.o=.d) - - -# Rules to force your project to rebuild or relink -# .force_relink file will cause any application that depends on this project to relink -# .force_rebuild file will cause this project to rebuild object files -# .force_rebuild_all file will cause this project and any project that depends on this project to rebuild object files - -FORCE_RELINK_DEP := .force_relink -FORCE_REBUILD_DEP := .force_rebuild -FORCE_REBUILD_ALL_DEP := .force_rebuild_all -FORCE_REBUILD_DEP_LIST := $(FORCE_RELINK_DEP) $(FORCE_REBUILD_DEP) $(FORCE_REBUILD_ALL_DEP) - -$(FORCE_REBUILD_DEP_LIST): - -$(OBJS): $(wildcard $(FORCE_REBUILD_DEP)) $(wildcard $(FORCE_REBUILD_ALL_DEP)) - - -#------------------------------------------------------------------------------ -# BUILD RULES: ALL & CLEAN -#------------------------------------------------------------------------------ -.DELETE_ON_ERROR: - -.PHONY: all -all: build_pre_process -all: Makefile $(GENERATED_FILES) $(BSP_LIB) $(NEWLIB_DIR) -all: build_post_process - - -# clean: remove .o/.a/.d -.PHONY: clean -clean: - @$(RM) -r $(BSP_LIB) $(OBJ_DIR) $(FORCE_REBUILD_DEP_LIST) -ifneq ($(wildcard $(NEWLIB_DIR)),) - @$(RM) -r $(NEWLIB_DIR) -endif - @$(ECHO) [BSP clean complete] - - -#------------------------------------------------------------------------------ -# BUILD PRE/POST PROCESS -#------------------------------------------------------------------------------ -build_pre_process : - $(BUILD_PRE_PROCESS) - -build_post_process : - $(BUILD_POST_PROCESS) - -.PHONY: build_pre_process build_post_process - - - -#------------------------------------------------------------------------------ -# MAKEFILE UP TO DATE? -# -# Is this very Makefile up to date? Someone may have changed the BSP settings -# file or the associated target hardware. -#------------------------------------------------------------------------------ -# Skip this check when clean is the only target -ifneq ($(MAKECMDGOALS),clean) - -ifneq ($(wildcard $(SETTINGS_FILE)),$(SETTINGS_FILE)) -$(warning Warning: BSP Settings File $(SETTINGS_FILE) could not be found.) -endif - -Makefile: $(wildcard $(SETTINGS_FILE)) - @$(ECHO) Makefile not up to date. - @$(ECHO) $(SETTINGS_FILE) has been modified since the BSP Makefile was generated. - @$(ECHO) - @$(ECHO) Generate the BSP to update the Makefile, and then build again. - @$(ECHO) - @$(ECHO) To generate from Eclipse: - @$(ECHO) " 1. Right-click the BSP project." - @$(ECHO) " 2. In the Nios II Menu, click Generate BSP." - @$(ECHO) - @$(ECHO) To generate from the command line: - @$(ECHO) " nios2-bsp-generate-files --settings=<settings file> --bsp-dir=<target bsp files directory>" - @$(ECHO) - @exit 1 - -ifneq ($(wildcard $(SOPC_FILE)),$(SOPC_FILE)) -$(warning Warning: SOPC File $(SOPC_FILE) could not be found.) -endif - -public.mk: $(wildcard $(SOPC_FILE)) - @$(ECHO) Makefile not up to date. - @$(ECHO) $(SOPC_FILE) has been modified since the BSP was generated. - @$(ECHO) - @$(ECHO) Generate the BSP to update the Makefile, and then build again. - @$(ECHO) - @$(ECHO) To generate from Eclipse: - @$(ECHO) " 1. Right-click the BSP project." - @$(ECHO) " 2. In the Nios II Menu, click Generate BSP." - @$(ECHO) - @$(ECHO) To generate from the command line: - @$(ECHO) " nios2-bsp-generate-files --settings=<settings file> --bsp-dir=<target bsp files directory>" - @$(ECHO) - @exit 1 - -endif # $(MAKECMDGOALS) != clean - -#------------------------------------------------------------------------------ -# PATTERN RULES TO BUILD OBJECTS -#------------------------------------------------------------------------------ -$(OBJ_DIR)/%.o: %.c - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CC_PRE_PROCESS) - $(CC) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CC_POST_PROCESS) - -$(OBJ_DIR)/%.o: %.C - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CC_PRE_PROCESS) - $(CC) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CC_POST_PROCESS) - -$(OBJ_DIR)/%.o: %.cpp - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_POST_PROCESS) - -$(OBJ_DIR)/%.o: %.CPP - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_POST_PROCESS) - -$(OBJ_DIR)/%.o: %.cc - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_POST_PROCESS) - -$(OBJ_DIR)/%.o: %.CC - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_POST_PROCESS) - -$(OBJ_DIR)/%.o: %.cxx - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_POST_PROCESS) - -$(OBJ_DIR)/%.o: %.CXX - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_POST_PROCESS) - -$(OBJ_DIR)/%.o: %.S - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(AS_PRE_PROCESS) - $(AS) -MP -MMD -c $(BSP_CFLAGS) $(BSP_CPPFLAGS) $(BSP_ASFLAGS) -o $@ $< - $(AS_POST_PROCESS) - -$(OBJ_DIR)/%.o: %.s - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(AS_PRE_PROCESS) - $(AS) -MP -MMD -c $(BSP_ASFLAGS) $(BSP_CFLAGS) -o $@ $< - $(AS_POST_PROCESS) - -# Pattern rules for making useful intermediate files -$(OBJ_DIR)/%.s: %.c - @$(ECHO) Compiling $(<F) to assembler... - @$(MKDIR) $(@D) - $(CC_PRE_PROCESS) - $(CC) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CC_POST_PROCESS) - -$(OBJ_DIR)/%.s: %.cpp - @$(ECHO) Compiling $(<F) to assembler... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_PRE_PROCESS) - -$(OBJ_DIR)/%.s: %.cc - @$(ECHO) Compiling $(<F) to assembler... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_PRE_PROCESS) - -$(OBJ_DIR)/%.s: %.cxx - @$(ECHO) Compiling $(<F) to assembler... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_PRE_PROCESS) - -$(OBJ_DIR)/%.i: %.c - @$(ECHO) Compiling $(<F) to assembler... - @$(MKDIR) $(@D) - $(CC_PRE_PROCESS) - $(CC) -E $(CPPFLAGS) $(ALT_CFLAGS) $(CFLAGS) -o $@ $< - $(CC_PRE_PROCESS) - -$(OBJ_DIR)/%.i: %.cpp - @$(ECHO) Compiling $(<F) to assembler... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_PRE_PROCESS) - -$(OBJ_DIR)/%.i: %.cc - @$(ECHO) Compiling $(<F) to assembler... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_PRE_PROCESS) - -$(OBJ_DIR)/%.i: %.cxx - @$(ECHO) Compiling $(<F) to assembler... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_PRE_PROCESS) - -# Pattern rules for building other object files. -%.o: %.c - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CC_PRE_PROCESS) - $(CC) -MP -MMD -c $(CPPFLAGS) $(ALT_CFLAGS) $(CFLAGS) -o $@ $< - $(CC_POST_PROCESS) - -%.o: %.cpp - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CXX_POST_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_POST_PROCESS) - -%.o: %.cc - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CXX_POST_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_POST_PROCESS) - -%.o: %.cxx - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(CXX_PRE_PROCESS) - $(CXX) -MP -MMD -c $(BSP_CPPFLAGS) $(BSP_CXXFLAGS) $(BSP_CFLAGS) -o $@ $< - $(CXX_POST_PROCESS) - -%.o: %.S - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(AS_PRE_PROCESS) - $(AS) -MP -MMD -c $(BSP_CFLAGS) $(BSP_CPPFLAGS) $(BSP_ASFLAGS) -o $@ $< - $(AS_POST_PROCESS) - -%.o: %.s - @$(ECHO) Compiling $(<F)... - @$(MKDIR) $(@D) - $(AS_PRE_PROCESS) - $(AS) -MP -MMD -c $(BSP_ASFLAGS) $(BSP_CFLAGS) -o $@ $< - $(AS_POST_PROCESS) - - -#------------------------------------------------------------------------------ -# NEWLIB RULES -#------------------------------------------------------------------------------ - -ifneq ($(COMPILE_NEWLIB),) -NEWLIB_FLAGS += $(BSP_CFLAGS) -endif - -ifneq ($(NEWLIB_FLAGS),) -ALT_LIBRARY_DIRS += $(NEWLIB_DIR)/nios2-elf/lib -endif - -$(NEWLIB_DIR): -ifneq ($(NEWLIB_FLAGS),) - @$(ECHO) Creating $(NEWLIB_DIR)... - nios2-newlib-gen --no-multilib $(NEWLIB_DIR)-build-tmp $(NEWLIB_DIR) --custom "$(NEWLIB_FLAGS)" - @$(ECHO) Removing $(NEWLIB_DIR)-build-tmp... - @$(RM) -rf $(NEWLIB_DIR)-build-tmp -endif - -#------------------------------------------------------------------------------ -# LIBRARY RULES -#------------------------------------------------------------------------------ -$(BSP_LIB): $(OBJS) - @$(ECHO) Creating $@... - $(AR_PRE_PROCESS) - $(RM) -f $@ - $(AR) $(BSP_ARFLAGS) $@ $^ - $(AR_POST_PROCESS) - - -#------------------------------------------------------------------------------ -# DEPENDENCY FILES -#------------------------------------------------------------------------------ -ifneq ($(findstring clean, $(MAKECMDGOALS)),clean) --include $(DEPS) -endif - -# End of Makefile - - |